Light Touch Switches/EVQP0/Q2/6Q2/7Q2 6 mm Square Thin Type SMD Light Touch Switches EVQP0 Type: EVQQ2 EVQ6Q2 EVQ7Q2 ■ Features ●Externaldimensions:6.5mm×6.0mm,Height1.8mm (Excludingthepushplate) ●Withorwithoutgroundterminal,height,operatingforce ●Overstroketravel ■ Recommended Applications ●Operatingswitchesforotherelectronicequipment ●OperationswitchesforPCmouse ●Caraudiosystems ●Game ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 P 0/2 Q 6 Q 7 Product Code Type Operating Force Product Height Push Plate Color Ground Terminal ■ Specifications Travel Type Short Push Travel Overstroke Travel Type Snap action/Push-on type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 100 mΩ max. Electrical Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing 10 ms max. (ON, OFF) 0.5 N, 0.8 N,1.0 N, 1.3 N, Operating Force 0.6 N, 1.0 N 1.6 N, 2.6 N, 3.5 N Mechanical 0.5 N, 0.8 N, 1.0 N 0.2mm Travel 1.3 N, 1.6 N, 2.6 N, 3.5 N 0.25mm 0.30 mm 0.5 N, 0.8 N : 2,000,000 cycles min. 1.0 N, 1.3 N, 1.6 N : 1,000,000 cycles min. 0.6 N : 2,000,000 cycles min. Endurance Operating Life 2.6 N : 200,000 cycles min. 1.0 N : 1,000,000 cycles min. 3.5 N : 100,000 cycles min. Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) Storage Temperature –20 °C to +60 °C (Taping) H=2.0 mm 4,000 pcs. Embossed Taping (Reel Pack) Minimum Quantity/Packing Unit H=2.5 mm, 3.1 mm 2,000 pcs. Embossed Taping (Reel Pack) H=2.0 mm 20,000 pcs. Quantity/Carton H=2.5 mm, 3.1 mm 10,000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2018.11 industrial.panasonic.com/ac/e/ –1– 　Panasonic Corporation 2018 ANCTB12E 201811-Fd ANCTB.indb 1 18/11/26 15:02

Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 1 EVQP0 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. Overstroke travel 6.5 With J-bent terminals φ3 Without B B' Ground Terminal 8 0.4.06.0 A A' φ2 8H 1. n. (6.6) 8) mi (0. 1 B B' 4.0 A A' (3.2) (3.6) (3.2) Circuit Diagram PWB land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQP0N02B 0.6 N 2.5 mm Blue Without 2,000,000 cycles EVQP0Q02Q 1.0 N 2.5 mm Gray Without 1,000,000 cycles No. 2 (General dimension tolerance : ± 0.2) EVQP0 ( )dimensions are reference dimensions. (5.1) (4.4) Overstroke travel 6.5 (3.9) With J-bent terminals φ3 Ⓐ With B B' Ground Terminal 8 0.4.06.0 3.6) ( A A' φ2 Operating 0.05±0.1 Ⓑ part Ground terminal The shape of the mounting base is 8H either Ⓐ or Ⓑ. 1. 3.3 8) (6.6) 0. ( n. 1 min. mi 1 B B' 0 4. A A' min. 1 (3.3) Circuit Diagram (3.2) (3.6) (3.2) PWB land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQP0P02B 0.6 N 2.5 mm Blue With 2,000,000 cycles EVQP0S02Q 1.0 N 2.5 mm Gray With 1,000,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2– 　　Panasonic Corporation 2018 ANCTB12E 201811-Fd ANCTB.indb 2 18/11/26 15:02

Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 3 EVQQ2/6Q2 (General dimension tolerance : ± 0.2) Short travel ( )dimensions are reference dimensions. With J-bent terminals 6.5 Without φ3.8 Ground Terminal B B' 8 0.00 4.6. A A' φ3 8H 1. (6.6) 0.8) min. ( 1 B B' 0 4. A A' (3.2) (3.6) (3.2) Circuit Diagram PWB land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQQ2B01W 0.5 N 2.0 mm White Without 2,000,000 cycles EVQQ2B02W 0.5 N 2.5 mm White Without 2,000,000 cycles EVQQ2B03W 0.5 N 3.1 mm White Without 2,000,000 cycles EVQ6Q201W 0.8 N 2.0 mm White Without 2,000,000 cycles EVQ6Q202W 0.8 N 2.5 mm White Without 2,000,000 cycles EVQ6Q203W 0.8 N 3.1 mm White Without 2,000,000 cycles EVQQ2F01W 1.0 N 2.0 mm White Without 1,000,000 cycles EVQQ2F02W 1.0 N 2.5 mm White Without 1,000,000 cycles EVQQ2F03W 1.0 N 3.1 mm White Without 1,000,000 cycles EVQQ2K01W 1.3 N 2.0 mm White Without 1,000,000 cycles EVQQ2K02W 1.3 N 2.5 mm White Without 1,000,000 cycles EVQQ2K03W 1.3 N 3.1 mm White Without 1,000,000 cycles EVQQ2P01W 1.6 N 2.0 mm White Without 1,000,000 cycles EVQQ2P02W 1.6 N 2.5 mm White Without 1,000,000 cycles EVQQ2P03W 1.6 N 3.1 mm White Without 1,000,000 cycles EVQQ2U01W 2.6 N 2.0 mm White Without 200,000 cycles EVQQ2U02W 2.6 N 2.5 mm White Without 200,000 cycles EVQQ2U03W 2.6 N 3.1 mm White Without 200,000 cycles EVQQ2Y01W 3.5 N 2.0 mm White Without 100,000 cycles EVQQ2Y02W 3.5 N 2.5 mm White Without 100,000 cycles EVQQ2Y03W 3.5 N 3.1 mm White Without 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –3– 　　Panasonic Corporation 2018 ANCTB12E 201811-Fd ANCTB.indb 3 18/11/26 15:02

Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 4 EVQQ2/7Q2 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. (5.1) Short travel (4.4) With J-bent terminals 6.5 (3.9) With φ3.8 Ⓐ Ground Terminal B B' 8 0.4.06.0 3.6) ( A A' φ3 Operating 0.05±0.1 Ⓑ part Ground terminal H The shape of the mounting base is 1.8 either Ⓐ or Ⓑ. 3.3 8) (6.6) 0. ( n. 1 min. mi 1 B B' 0 4. A A' min. 1 (3.3) Circuit Diagram (3.2) (3.6) (3.2) PWB land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQQ2D01W 0.5 N 2.0 mm White With 2,000,000 cycles EVQQ2D02W 0.5 N 2.5 mm White With 2,000,000 cycles EVQQ2D03W 0.5 N 3.1 mm White With 2,000,000 cycles EVQ7Q201W 0.8 N 2.0 mm White With 2,000,000 cycles EVQ7Q202W 0.8 N 2.5 mm White With 2,000,000 cycles EVQ7Q203W 0.8 N 3.1 mm White With 2,000,000 cycles EVQQ2H01W 1.0 N 2.0 mm White With 1,000,000 cycles EVQQ2H02W 1.0 N 2.5 mm White With 1,000,000 cycles EVQQ2H03W 1.0 N 3.1 mm White With 1,000,000 cycles EVQQ2M01W 1.3 N 2.0 mm White With 1,000,000 cycles EVQQ2M02W 1.3 N 2.5 mm White With 1,000,000 cycles EVQQ2M03W 1.3 N 3.1 mm White With 1,000,000 cycles EVQQ2S01W 1.6 N 2.0 mm White With 1,000,000 cycles EVQQ2S02W 1.6 N 2.5 mm White With 1,000,000 cycles EVQQ2S03W 1.6 N 3.1 mm White With 1,000,000 cycles EVQQ2W01W 2.6 N 2.0 mm White With 200,000 cycles EVQQ2W02W 2.6 N 2.5 mm White With 200,000 cycles EVQQ2W03W 2.6 N 3.1 mm White With 200,000 cycles EVQQ2201W 3.5 N 2.0 mm White With 100,000 cycles EVQQ2202W 3.5 N 2.5 mm White With 100,000 cycles EVQQ2203W 3.5 N 3.1 mm White With 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –4– 　　　Panasonic Corporation 2018 ANCTB12E 201811-Fd ANCTB.indb 4 18/11/26 15:02

Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Recommended Reflow Soldering Conditions ●EmbossedCarrierTaping MAX. 260 Fan or Normal Temp. Tape width=12.0 mm C) 230 t1 Feeding hole Chip pocket p (° 180 φD0 P2 P0 o n T 150 E o A erati B FW p O (Normal Temp.) t2 Chip component P1 Tape running direction 90±30 40±10 Taping condition : Lack of products in the middle of taping should be Soldering Time (s) one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1. ON at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia t1 t2 EVQQ2 2.0 2.2±0.2 EVQ6Q2 EVQ7Q2 2.5/3.1 6.7±0.2 7.4±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5+‒00.1 0.30±0.05 3.2±0.2 EVQP0 2.5 2.8±0.2 ■ Recommended Shape of Test Pole ■ Recommended Operating Conditions 2 mm Type 2.5 mm, 3.1 mm Type 0.3 mm max. Leaning angle range 90 °±4 ° φ3+–00.5 φ4+–00.5 Test pole (vertical direction) Switch R0.1 mm±0.05 mm R0.1 mm±0.05 mm Mounting surface Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –5– 　　　Panasonic Corporation 2018 ANCTB12E 201811-Fd ANCTB.indb 5 18/11/26 15:02

Guidelines and cautions for using the product technical information and the products displayed on this material (cid:426)The products described on this material were designed and manufactured for standard applications such as general electronics devices, office equipment, data and communications equipment, measuring instruments, household appliances and audio-video equipment. For special applications in which quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention and anti-theft devices, and safety equipment), please use only after your company has sufficiently tasted our products' suitability for that application. (cid:426)When using our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you use protection circuits and redundancy circuits for equipment safety and test for safety. (cid:426)The products and product specifications described on this material are subject to change for improvement without prior notice. Therefore, be sure to request and confirm in advance the most current specifications, which explain the specifications in detail, before the final stage of your design, purchasing or use for any application. (cid:426)The technical information on this material provides examples of the products' typical operations and application circuits. It is not intended to guarantee the non-infringement of or grant license for intellectual property rights of this company or any third party. (cid:426)Permission must be obtained from the Japanese government if products, products specifications and technical information on this material that are subject to the "Foreign Exchange and Foreign Trade Law" are to be exported or taken out of Japan. (cid:426)The information contained on this material may not be reprinted or reproduced whether wholly or in part, without the prior written permission of Panasonic Corporation. Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2018 ANCTB12E-2 201811-Fd Specifications are subject to change without notice. ANCTB.indb 6 18/11/26 15:02