Light Touch Switches/EVQP2/P9/3P2 4.7 mm×3.5 mm SMD Light Touch Switches EVQP2/EVQP9/EVQ3P2 Type: ■ Features ●Externaldimensions:4.7mm×3.5mm, Height:MiddlePushTravel2.5mm ShortPushTravel2.1mm,2.5mm ●Highoperatingforceandlongoperationallife ●HighmountabilitywithJ-bent(4terminals) ■ Recommended Applications ●Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders, Portableaudioplayers,etc.) ●Keylessentrysystems(automotive) ●Caraudioequipment ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 Product Code Type Operating Force Product Height and Push Plate Color ■ Specifications Travel Type Middle Push Travel Short Push Travel Type Snap action / Push-on V DC type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 100 mΩ max. Electrical Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC (1 minute) Bouncing 10 ms max. (ON, OFF) Operating Force 2.5 N, 3.5 N, 5.0 N 1.0 N, 1.6 N, 2.4 N, 3.5 N, 4.0 N, 5.0 N Mechanical Travel 0.70 mm±0.20 mm 0.25 mm+–00..1055 mm 1.0 N, 1.6 N:1,000,000 cycles min. 2.5 N:1,000,000 cycles min. 2.4 N: 500,000 cycles min. Endurance Operating Life 3.5 N: 500,000 cycles min. 3.5 N: 200,000 cycles min. 5.0 N: 200,000 cycles min. 4.0 N: 200,000 cycles min. 5.0 N: 200,000 cycles min. Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) Storage Temperature –20 °C to +60 °C (Taping) Minimum Quantity/Packing Unit 4,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 20,000 pcs. Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. (cid:21)(cid:19)(cid:20)(cid:28)(cid:17)(cid:19)(cid:22) (cid:76)(cid:81)(cid:71)(cid:88)(cid:86)(cid:87)(cid:85)(cid:76)(cid:68)(cid:79)(cid:17)(cid:83)(cid:68)(cid:81)(cid:68)(cid:86)(cid:82)(cid:81)(cid:76)(cid:70)(cid:17)(cid:70)(cid:82)(cid:80)(cid:18)(cid:68)(cid:70)(cid:18)(cid:72)(cid:18) ー 1 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 1 EVQP2 EVQ3P2 Middle push travel With J-bent terminals Without Ground Terminal (General dimension tolerance±0.2) 2.5+0.2 –0.1 0.6 φ1.8 4.7±0.1 +05.5–0.3 1.65±0.1 Circuit diagram 3.5±0.1 1.7±0.1 0.6±0.1 11 0.0. ±± 67 6.3. 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2H02B Without 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2K02Q Without 3.5 N 2.5 mm Gray 500,000 cycles EVQ3P202K Without 5.0 N 2.5 mm Black 200,000 cycles Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 2 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 2 EVQP2 EVQ3P2 Middle push travel With J-bent terminals With (General dimension tolerance : ± 0.2) Ground Terminal 5 5 0. Ground terminal 2.5+0.2 –0.1 0.6 φ1.8 0.1 +0–0.3 ± 5 4.7 5. 1.65±0.1 Circuit diagram 3.5±0.1 1 0. ± 4 1. 1.7±0.1 0.6±0.1 1.7±0.1 1 1 0. 0. ± ± 6 7 1 6. 3. 2.35±0.1 0.3 GND 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2B02B With 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2D02Q With 3.5 N 2.5 mm Gray 500,000 cycles EVQP2F02K With 5.0 N 2.5 mm Black 200,000 cycles Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 3 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 3 EVQP2 EVQP9 (General dimension tolerance±0.2) Short push travel 1.6 With J-bent terminals Without Ground Terminal H 0.6 φ2 7±0.1 2.6 +05.5–0.3 4. Circuit diagram 1.65±0.1 3.5±0.1 1.7±0.1 0.6±0.1 5 0.5 1.6 0.10.1 ±± 67 6.3. Ground terminal 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2002M Without 1.0 N 2.1 mm White 1,000,000 cycles EVQP2002W Without 1.0 N 2.5 mm White 1,000,000 cycles EVQP2202M Without 1.6 N 2.1 mm White 1,000,000 cycles EVQP2202W Without 1.6 N 2.5 mm White 1,000,000 cycles EVQP2402M Without 2.4 N 2.1 mm White 500,000 cycles EVQP2402W Without 2.4 N 2.5 mm White 500,000 cycles EVQP2602M Without 3.5 N 2.1 mm White 200,000 cycles EVQP2602W Without 3.5 N 2.5 mm White 200,000 cycles EVQP9W02M Without 4.0 N 2.1 mm White 200,000 cycles EVQP9W02W Without 4.0 N 2.5 mm White 200,000 cycles EVQP9P02M Without 5.0 N 2.1 mm White 200,000 cycles EVQP9P02W Without 5.0 N 2.5 mm White 200,000 cycles Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 4 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 4 EVQP2 (General dimension tolerance±0.2) EVQP9 Short push travel 0.55 1.6 With J-bent terminals With Ground Terminal Ground terminal H 0.6 φ2 4.7±0.1 2.6 +05.5–0.3 Circuit diagram 1.65±0.1 1 3.5±0.1 0. ± 4 1. 1.7±0.1 0.6±0.1 1.7±0.1 1 1 0. 0. ± ± 6 7 1 6. 3. 2.35±0.1 0.3 GND 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2P02M With 1.0 N 2.1 mm White 1,000,000 cycles EVQP2P02W With 1.0 N 2.5 mm White 1,000,000 cycles EVQP2R02M With 1.6 N 2.1 mm White 1,000,000 cycles EVQP2R02W With 1.6 N 2.5 mm White 1,000,000 cycles EVQP2T02M With 2.4 N 2.1 mm White 500,000 cycles EVQP2T02W With 2.4 N 2.5 mm White 500,000 cycles EVQP2V02M With 3.5 N 2.1 mm White 200,000 cycles EVQP2V02W With 3.5 N 2.5 mm White 200,000 cycles EVQP9102M With 4.0 N 2.1 mm White 200,000 cycles EVQP9102W With 4.0 N 2.5 mm White 200,000 cycles EVQP9H02M With 5.0 N 2.1 mm White 200,000 cycles EVQP9H02W With 5.0 N 2.5 mm White 200,000 cycles Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 5 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Light Touch Switches/EVQP2/P9/3P2 ■ Recommended Reflow Soldering Conditions ●EmbossedCarrierTaping MAX. 260 Fan or Normal Temp. 230 Tape width=12.0 mm C) p (° 180 t1 Feeding hole Chip pocket n To 150 φD0 P2 P0 o perati A FEW O B (Normal Temp.) Chip component P1 Tape running direction t2 90±30 40±10 Soldering Time (s) Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1. ON at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia t1 t2 EVQP2 EVQP9 22..15 6.0±0.2 4.7±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5+–00.1 0.3±0.1 2.7±0.2 EVQ3P2 ■ Recommended Shape of Test Pole ■ Recommended Operating Conditions Middle Push Short Push 0.3 mm max. Travel Type Travel Type Leaning angle range 90 ˚±4 ˚ Test pole (vertical direction) φ3.0 φ3.3 toφ 3.7 Switch Mounting surface Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 6 ー ©Panasonic Corporation 2019 ANCTB19E　201903-Fd

Requests to customers Specifications and warranty range of this product The contents and data of this product and its specifications and Web Panasonic Corporation refuses to the maximum extent permitted by site (hereinafter referred to as "specifications") are subject to change law for the followings: (including specifications, manufacturing facility, discontinuing 1) any liability that may occur due to the use or application of the products). Consequently, when you use this product for mass product, production, Panasonic Corporation, Electromechanical Control 2) all liability including special damage, indirect or incidental damage, Business Division (hereinafter referred to as "Panasonic Corporation") and all other damages, asks you to contact one of our customer service representatives and 3) all implied warranties, including the implied warranty of suitability for check that the details listed in Web site and catalog are commensurate a particular purpose, the implied warranty of non-infringement, and with the most up-to-date information. the implied warranty of merchantability. The description of suitability of a product for certain applications is Even if there is a mistake, inaccurate description, or incomplete based on typical requirements we may know of using our products for description in the contents of Web site and catalog or the disclosure general purpose use. related to any product, Panasonic Corporation and its affiliates, agents, These descriptions are not binding on the suitability of the product for employees, or all persons act for us (hereinafter collectively referred to a particular application. It is a customer's responsibility to verify as "Panasonic Corporation") are not responsible for it and we will not whether or not the specific product, which has the usage rights take any liability. described in the specifications exchanged with us, is suitable for use in a specific purpose. The parameters given in catalogs or specifications Panasonic Corporation guarantees that this product will correspond to may vary depending on the application and performance may change the contents described in specifications during the warranty period over time. All operating parameters, including general parameters, specified in specifications. Further, the data described in specifications must be verified by customer for each application. is the initial value at the time of shipment of this product, and it shall The terms and conditions of purchase contract with Panasonic not guarantee that it operates in a specific application, whether Corporation, including warranty contents stated in contract and any explicitly or implicitly. Panasonic Corporation will not guarantee the other contents, will not be expanded or modified by product suitability of this product for any particular purpose. Panasonic specifications. Corporation asks you to check the suitability for specific applications of Unless explicitly stated otherwise,our products are not designed for this product. medical described in [Safety Precautions] below, lifesaving, life support, or for any application where failure of our products may cause physical injury or death. If you use or sell our product for any purpose other than its stated use, that action is at your own responsibility. Nothing in this document or any actions of Panasonic Corporation is permitted to enforce or use any intellectual property right, whether expressly or implicitly, and whether it is estoppel or not. Safety precautions Panasonic Corporation is consistently striving to improve quality and It is not allowed the use of products by incorporating into machinery reliability. However,the fact remains that electrical components and and systems indicated below because the conformity,performance, devices generally cause failures at a given statistical probability. and quality of products are not guaranteed under such usage. Furthermore, their durability varies with use environments or use conditions. In this respect, check for actual electrical components and 1) transport machinery (cars, trains, boats and ships, etc.) devices under actual conditions before use. Continued usage in a 2) control equipment for transportation state of degraded condition may cause abnormal heat, smoke or fire 3) disaster-prevention equipment / security equipment due to deteriorated insulation, or may cause loss of product 4) control equipment for electric power generation functionality due to continuityfailure. Carry out safety design and 5) nuclear control system periodic maintenance including redundancy design, design for fire 6) aircraft equipment, aerospace equipment, and submarine repeater spread prevention, and design for malfunction prevention so that no 7) burning appliances accidents resulting in injury or death, fire accidents, or social damage 8) military devices will be caused as a result of failure of the products or ending life of the 9) medical devices (except for general controls) products. 10) machinery and systems which especially require the high level of reliability and safety The products are designed and manufactured for the purpose of being used for general electronic equipment (such as AV equipment, If you use for the above purposes without exchanging the household products, business equipment, office equipment, specifications with us, we shall not guarantee any quality. communication equipment) for general purpose standard applications. Make sure standards,laws and regulations in case the products are incorporated to machinery, system, apparatus, and so forth. With regard to the mentioned above, confirm the conformity of the Products by yourself. Do not use the Products for the application which breakdown or malfunction of Products may cause damage to the body or property. 1) usage intended to protect the body and ensure security of life 2) application which the performance degradation or quality problems, such as breakdown, of the products may directly result in damage to the body or property Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 7 ー Panasonic Corporation 2020 ANCTB124E 202006

Requests to customers Disclaimers We will not accept any quality guarantee, liability for damages and other claims for any reason, if you use it under specific conditions without prior consent to individual specifications. Regarding damage to life/ body/property including third party (including reasonable attorney/lawsuit costs) caused by the use of our products under specific conditions by you or a third party including your customer, in addition to being responsible for resolution, we ask you to agree that Panasonic Corporation/affiliates and the executives/employees/agents(hereinafter referred to as Panasonic Corporation) are protected, and not make us to incur cost and liability and do not claim damages to us. "Our affiliated company" means a company in which Panasonic Corporation directly or indirectly holds a majority of voting rights, or a company that directly or indirectly holds a majority of voting rights of Panasonic Corporation, and a company whose majority of voting rights are held directly or indirectly by the holder who has the majority of voting rights of Panasonic Corporation directly or indirectly. Acceptance inspection In connection with the products you have purchased from us or with the products delivered to your premises, please perform an acceptance inspection with all due speed and, in connection with the handling of our products both before and during the acceptance inspection, please give full consideration to the control and preservation of our products. Warranty period Unless otherwise stipulated by both parties, the warranty period of our products is one year after the purchase by you or after their delivery to the location specified by you. However, the period for soldering and mounting our products on substrates shall not exceed 6 months at the maximum, after purchase or after delivery to your designated location, under the storage conditions specified separately. Scope of warranty In the event that Panasonic Corporation confirms any failures or 1) When the failure or defect was caused by a specification, standard, defects of the products by reasons solely attributable to Panasonic handling method, etc. which was specified by you. Corporation during the warranty period, Panasonic Corporation shall 2) When the failure or defect was caused after purchase or delivery to supply the replacements of the products, parts or replace and/or repair your premises by an alteration in construction, performance, the defective portion by free of charge at the location where the specification, etc. which did not involve us. products were purchased or delivered to your premises as soon as 3) When the failure or defect was caused by a phenomenon that could possible. not be predicted by the technology at purchasing or contracted time. However, the following failures and defects are not covered by the 4) When the use of our Products deviated from the scope of the warranty and we are not responsible for such failures and defects. conditions and environment set forth in the catalogs and specifications. 5) When, after our Products were incorporated into your products or equipment for use, damage resulted which could have been avoided if your products or equipment had been equipped with the functions, construction, etc. the provision of which is accepted practice in the industry. 6) When the failure or defect was caused by a natural disaster or other force majeure. The above terms and conditions shall not cover any induced damages by the failure or defects of the products, and not cover your production items which are produced or fabricated by using the products, or are re-mounted after disassembly or removal from mounting substrates. In any case, our responsibility for compensation is limited to the amount paid for the products. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 8 ー Panasonic Corporation 2020 ANCTB124E 202006

Requests to customers Usage environment Our products are intended for general-purpose and standard use in 1) Use in liquids such as water, oil, chemicals and organic solvents electronic devices, and are not designed for use in special 2) Use in direct sunlight, outdoor exposure, and dust environments shown belows. 3) Use in locations with a lot of corrosive gas such as moisture (such Therefore, use and conditions in the following special environments as condensation of resistor, water leakage), sea breeze, Cl2, H2S, may affect the product characteristics, please check the performance NH3, SO2, NOx. and reliability at your company before use. 4) Use in an environment where static electricity and electromagnetic waves are strong 5) When mounting in proximity to heat-generating components or when placing flammable materials such as vinyl wiring in proximity to our products 6) When using this product after sealing with resin etc. 7) When using solvent, water or water-soluble cleaning agent for flux cleaning after soldering (be especially careful with water-soluble flux) 8) Use in an environment with acid or alkali atmosphere 9) Use in an environment where there is excessive shock or vibration Please make sure to use the voltage below the rated voltage, when using an impact voltage circuit, a transient phenomenon in which a high voltage is applied for a short time, or when a pulsed high voltage is applied. Product handling In order to prevent failures and characteristic fluctuations due to external factors (electrostatic stress, overvoltage/overcurrent stress, thermal stress, mechanical stress) during product handling, mounting, and in your process, be sure to observe and use within specifications, considering the range expected for standard applications of general electronic devices. Certificate of compliance to RoHS directive The timing for switching to compliant RoHS varies depending on the product. When you are using stock items and uncertain whether or not it is RoHS compliant, please contact us. Storage Our products may be affected by performance deterioration and 1) Environment where temperature is -10°C or less, +40°C or more, performance such as solderability, so please avoid storing in the and humidity is 85% RH or more following environment and conditions. 2) In an atmosphere of corrosive gas 3) Long-term storage of more than 6 months after product delivery 4) A place exposed to direct sunlight • Please keep it in a packaged state so as not to apply load stress. • Please use as soon as possible, within 3 month as a guide and up to 6 months. • If there are remaining items after opening the packing, take appropriate measures to prevent moisture and gas before storing. After discontinuing production It is not possible to supply products (including supplies) after production is discontinued. Intellectual property rights and licenses The technical information on Web site and catalog shows the typical operation and application circuit examples of the product, so it does not mean to guarantee not to infringe the intellectual property rights of our company or a third party, or to grant licenses. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 9 ー Panasonic Corporation 2020 ANCTB124E 202006

Requests to customers Export Please follow the laws and regulations of the country concerned, especially the laws and regulations regarding security export control, and carry out the necessary procedures, when you export or provide to non-residents the product, product specifications and technical information on Web site and catalog. Reprinting/Reproduction All or part of the information on Web site and catalog are strictly prohibited from being reprinted or reproduced without the written consent of our company. Resale If the product on Web site and catalog are resold to another companies without permission, and you receive any claims from them, please note that you will be responsible for it. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 10 ー Panasonic Corporation 2020 ANCTB124E 202006

Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB19E-2 201903-Fd Specifications are subject to change without notice.