Light Touch Switches/EVQP2/P9/3P2 4.7 mm×3.5 mm SMD Light Touch Switches EVQP2/EVQP9/EVQ3P2 Type: ■ Features ●Externaldimensions:4.7mm×3.5mm, Height:MiddlePushTravel2.5mm ShortPushTravel2.1mm,2.5mm ●Highoperatingforceandlongoperationallife ●HighmountabilitywithJ-bent(4terminals) ■ Recommended Applications ●Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders, Portableaudioplayers,etc.) ●Keylessentrysystems(automotive) ●Caraudioequipment ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 Product Code Type Operating Force Product Height and Push Plate Color ■ Specifications Travel Type Middle Push Travel Short Push Travel Type Snap action / Push-on V DC type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 100 mΩ max. Electrical Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC (1 minute) Bouncing 10 ms max. (ON, OFF) Operating Force 2.5 N, 3.5 N, 5.0 N 1.0 N, 1.6 N, 2.4 N, 3.5 N, 4.0 N, 5.0 N Mechanical Travel 0.70 mm±0.20 mm 0.25 mm+–00..1055 mm 1.0 N, 1.6 N:1,000,000 cycles min. 2.5 N:1,000,000 cycles min. 2.4 N: 500,000 cycles min. Endurance Operating Life 3.5 N: 500,000 cycles min. 3.5 N: 200,000 cycles min. 5.0 N: 200,000 cycles min. 4.0 N: 200,000 cycles min. 5.0 N: 200,000 cycles min. Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) Storage Temperature –20 °C to +60 °C (Taping) Minimum Quantity/Packing Unit 4,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 20,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2018.11 industrial.panasonic.com/ac/e/ –1– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 23 18/11/26 15:02

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 1 EVQP2 EVQ3P2 Middle push travel With J-bent terminals Without Ground Terminal (General dimension tolerance±0.2) 2.5+0.2 –0.1 0.6 φ1.8 4.7±0.1 +05.5–0.3 1.65±0.1 Circuit diagram 3.5±0.1 1.7±0.1 0.6±0.1 11 0.0. ±± 67 6.3. 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2H02B Without 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2K02Q Without 3.5 N 2.5 mm Gray 500,000 cycles EVQ3P202K Without 5.0 N 2.5 mm Black 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 24 18/11/26 15:02

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 2 EVQP2 EVQ3P2 Middle push travel With J-bent terminals With (General dimension tolerance : ± 0.2) Ground Terminal 5 5 0. Ground terminal 2.5+0.2 –0.1 0.6 φ1.8 0.1 +0–0.3 ± 5 4.7 5. 1.65±0.1 Circuit diagram 3.5±0.1 1 0. ± 4 1. 1.7±0.1 0.6±0.1 1.7±0.1 1 1 0. 0. ± ± 6 7 1 6. 3. 2.35±0.1 0.3 GND 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2B02B With 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2D02Q With 3.5 N 2.5 mm Gray 500,000 cycles EVQP2F02K With 5.0 N 2.5 mm Black 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –3– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 25 18/11/26 15:02

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 3 EVQP2 EVQP9 (General dimension tolerance±0.2) Short push travel 1.6 With J-bent terminals Without Ground Terminal H 0.6 φ2 7±0.1 2.6 +05.5–0.3 4. Circuit diagram 1.65±0.1 3.5±0.1 1.7±0.1 0.6±0.1 5 0.5 1.6 0.10.1 ±± 67 6.3. Ground terminal 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2002M Without 1.0 N 2.1 mm White 1,000,000 cycles EVQP2002W Without 1.0 N 2.5 mm White 1,000,000 cycles EVQP2202M Without 1.6 N 2.1 mm White 1,000,000 cycles EVQP2202W Without 1.6 N 2.5 mm White 1,000,000 cycles EVQP2402M Without 2.4 N 2.1 mm White 500,000 cycles EVQP2402W Without 2.4 N 2.5 mm White 500,000 cycles EVQP2602M Without 3.5 N 2.1 mm White 200,000 cycles EVQP2602W Without 3.5 N 2.5 mm White 200,000 cycles EVQP9W02M Without 4.0 N 2.1 mm White 200,000 cycles EVQP9W02W Without 4.0 N 2.5 mm White 200,000 cycles EVQP9P02M Without 5.0 N 2.1 mm White 200,000 cycles EVQP9P02W Without 5.0 N 2.5 mm White 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –4– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 26 18/11/26 15:02

Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 4 EVQP2 (General dimension tolerance±0.2) EVQP9 Short push travel 0.55 1.6 With J-bent terminals With Ground Terminal Ground terminal H 0.6 φ2 4.7±0.1 2.6 +05.5–0.3 Circuit diagram 1.65±0.1 1 3.5±0.1 0. ± 4 1. 1.7±0.1 0.6±0.1 1.7±0.1 1 1 0. 0. ± ± 6 7 1 6. 3. 2.35±0.1 0.3 GND 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2P02M With 1.0 N 2.1 mm White 1,000,000 cycles EVQP2P02W With 1.0 N 2.5 mm White 1,000,000 cycles EVQP2R02M With 1.6 N 2.1 mm White 1,000,000 cycles EVQP2R02W With 1.6 N 2.5 mm White 1,000,000 cycles EVQP2T02M With 2.4 N 2.1 mm White 500,000 cycles EVQP2T02W With 2.4 N 2.5 mm White 500,000 cycles EVQP2V02M With 3.5 N 2.1 mm White 200,000 cycles EVQP2V02W With 3.5 N 2.5 mm White 200,000 cycles EVQP9102M With 4.0 N 2.1 mm White 200,000 cycles EVQP9102W With 4.0 N 2.5 mm White 200,000 cycles EVQP9H02M With 5.0 N 2.1 mm White 200,000 cycles EVQP9H02W With 5.0 N 2.5 mm White 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –5– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 27 18/11/26 15:02

Light Touch Switches/EVQP2/P9/3P2 ■ Recommended Reflow Soldering Conditions ●EmbossedCarrierTaping MAX. 260 Fan or Normal Temp. 230 Tape width=12.0 mm C) p (° 180 t1 Feeding hole Chip pocket n To 150 φD0 P2 P0 o perati A FEW O B (Normal Temp.) Chip component P1 Tape running direction t2 90±30 40±10 Soldering Time (s) Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1. ON at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia t1 t2 EVQP2 EVQP9 22..15 6.0±0.2 4.7±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5+–00.1 0.3±0.1 2.7±0.2 EVQ3P2 ■ Recommended Shape of Test Pole ■ Recommended Operating Conditions Middle Push Short Push 0.3 mm max. Travel Type Travel Type Leaning angle range 90 ˚±4 ˚ Test pole (vertical direction) φ3.0 φ3.3 toφ 3.7 Switch Mounting surface Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –6– 　Panasonic Corporation 2018 ANCTB19E 201811-Fd ANCTB.indb 28 18/11/26 15:02

Guidelines and cautions for using the product technical information and the products displayed on this material (cid:426)The products described on this material were designed and manufactured for standard applications such as general electronics devices, office equipment, data and communications equipment, measuring instruments, household appliances and audio-video equipment. For special applications in which quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention and anti-theft devices, and safety equipment), please use only after your company has sufficiently tasted our products' suitability for that application. (cid:426)When using our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you use protection circuits and redundancy circuits for equipment safety and test for safety. (cid:426)The products and product specifications described on this material are subject to change for improvement without prior notice. Therefore, be sure to request and confirm in advance the most current specifications, which explain the specifications in detail, before the final stage of your design, purchasing or use for any application. (cid:426)The technical information on this material provides examples of the products' typical operations and application circuits. It is not intended to guarantee the non-infringement of or grant license for intellectual property rights of this company or any third party. (cid:426)Permission must be obtained from the Japanese government if products, products specifications and technical information on this material that are subject to the "Foreign Exchange and Foreign Trade Law" are to be exported or taken out of Japan. (cid:426)The information contained on this material may not be reprinted or reproduced whether wholly or in part, without the prior written permission of Panasonic Corporation. Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2018 ANCTB19E-1 201811-Fd Specifications are subject to change without notice. ANCTB.indb 29 18/11/26 15:02