Choke Coils Power Choke Coil PCC-F126F (N6) Series: Thin, compact and high power ■ Features ● High power (Isat 20 A /100 °C) ● Thin profi le (5.7 mm height)/SMD ● Low leakage fl ux ● RoHS compliant ■ ■ Recommended Applications Standard Packing Quantity ● DC-DC converter for driving PCs at high speed ● 500 pcs./Reel ● On-board power supply module for DC-DC converters (10 to 40 W) ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 (cid:38) (cid:53) (cid:50) (cid:49) (cid:39) Product code ClassificationSize Winding Inductance Core Packaging Suffix ■ Standard Parts Initial Inductance Saturation Heat inductance at fl at point current current DC re sist ance at 25 °C at 25 °C at 25 °C at 100 °C ΔT=40 °C at 20 °C Parts No. Type I sat I sat RDC L0 (μH) T(%ol). L1 (μH) T(%ol). (A) (A) I 0 (A) (mΩ) min. min. max. ETQP6F1R2HFA 2.3 1.2 14.3 11.7 14.2 2.24 ±30 ±30 ETQP6F2R0HFA 3.5 2.0 10.7 8.7 12.5 3.30 ETQP6F3R2HFA 4.8 3.2 8.6 7.1 10.8 4.92 ETQP6F4R6HFA HL 6.6 4.6 7.3 6.0 9.3 6.48 ETQP6F6R4HFA 8.3 ±25 6.4 ±25 6.2 5.2 7.9 8.64 ETQP6F8R2HFA 10.4 8.2 6.0 5.0 7.2 10.90 ETQP6F102HFA 12.5 10.2 4.7 4.0 6.5 13.30 ETQP6F1R0SFA 1.9 1.0 19.4 15.4 14.2 2.24 ETQP6F1R6SFA 2.8 1.6 14.9 12.2 12.5 3.30 SP ETQP6F2R5SFA 3.6 2.5 11.3 9.3 10.8 4.92 ETQP6F3R5SFA 4.9 3.5 9.5 8.0 9.3 6.48 ±30 ±30 ETQP6F0R8LFA 1.8 0.8 25.2 20.0 14.2 2.24 ETQP6F1R3LFA 2.5 1.3 18.6 15.8 12.5 3.30 ETQP6F2R0LFA LB 3.1 2.0 15.1 12.1 10.8 4.92 ETQP6F2R9LFA 4.1 2.9 12.0 10.0 9.3 6.48 ETQP6F4R1LFA 5.0 ±20 4.1 ±20 10.8 8.7 7.9 8.64 (Note1) Inductance is measured at 100 kHz (Note2) For defi nitions of L0 & L1 please see the next page (Note3) Saturation current (I sat) is the current value that inductance (L1) decreases to 80 % of initial value. (Note4) Heat current (I0) is the actual value of the current at which the temperature rise of the coil becomes 40 dc from its initial (ambient temperature) value. The case temperature of the power choke coil is determined by the ambient temperature plus the heat generated by the operating current. Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2012

Choke Coils ■ Figure 1: L0,L1:Defi nition DC Bias Characteristic L0 L1 H) μ L ( L0 : (Initial Inductance) Inductance when Idc is zero L1 : (Inductance at flat point) point where the measured inductance is 80 % of its initial value 0 0 Idc (A) ■ ■ Figure 2: Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 12.5±0.3 ±0.4 6 0) 5.6 5 6. 2. ( 1 Date code MARKING 2.0 10.8 2.0 x. a m 7 5. ( ) : Reference value 0.6 min. 2.1 min. 0.05 min.: Clearance between the Terminal surface and the case surface ±0.2 ±0.1 ±0.2 8.0 5.0 8.0 1.2±0.2 (10.0) 1.2±0.2 0.3 min.: Clearance between 1.3±0.2 the Terminal surface and the surface of the molded resin case ■ Packaging Methods, Soldering Conditions and Safety Precautions (Power Choke Coils for Consumer use) Please see Data Files Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2012

Choke Coils ■ Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale) f D 0 P2 P0 E t1 t2 A F W B P1 Tape running direction Power Choke Coils for high reliability use Series A B W E F P P P fD t t 1 2 0 0 1 2 PCC-M0530M 3.3 5.6 6.1 PCC-M0540M 4.3 PCC-M0630M 3.3 7.1 6.6 16.0 7.5 12.0 0.4 PCC-M0645M 5.0 1.75 2.0 4.0 1.5 PCC-M0754M 8.1 7.6 6.0 PCC-M0854M/M0850M 9.1 8.6 PCC-M1054M/M1050M 10.7 11.9 24.0 11.5 16.0 0.5 6.3 PCC-M1050ML/M1060ML Power Choke Coils for consumer use Series A B W E F P P P fD t t 1 2 0 0 1 2 PCC-M0512W 5.6 5.85 12.0 5.5 8.0 1.4 PCC-M0630L 7.1 8.0 3.2 PCC-M0630W 7.2 7.5 3.3 16.0 7.5 12.0 PCC-M0730L 7.6 8.9 4.2 PCC-M074L 7.6 8.9 4.3 PCC-M104W 10.6 11.0 PCC-M104L 10.6 11.8 1.75 2.0 4.0 1.5 0.4 5.2 PCC-M125L 13.1 14.8 5.3 PCC-D124H 24.0 11.5 16.0 5.2 PCC-D125H 13.5 13.5 PCC-D126H 6.2 PCC-D126F 13.0 13.0 6.0 PCC-F126F ● Taping Reel Dimensions in mm (not to scale) E C B D W A Power Choke Coils for high reliability use Series A B C D E W PCC-M0530M/M0540M PCC-M0630M/M0645M 17.5 PCC-M0754M 330 100 13 21 2 PCC-M0854M/M0850M PCC-M1054M/M1050M 25.5 PCC-M1050ML/M1060ML Power Choke Coils for consumer use Series A B C D E W PCC-M0512W (80) 13.5 PCC-M0630L/M0630W 330 17.5 PCC-M104W 25.5 PCC-M0730L/M074L 13 21 2 17.5 80 PCC-M104L 380 PCC- M125L/D124H/D125H/ 25.4 D126H/D126F/F126F Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Dec. 2013

Choke Coils ■ Component Placement (Taping) ● Power Choke Coils for high reliability use ● Power Choke Coils for consumer use Series M0630M/M0645M M0754M Series Ｍ0512W/M0630W/M104W M0854M/M0850M Terminal Series M0630L/M0730L/M074L/M104L/ Series M0530M/M0540M M125L/D126F/F126F M1054M/M1050M M1050ML/M1060ML al n mi Ter Series D124H/D125H/D126H ■ Standard Packing Quantity/Reel ● Power Choke Coils for high reliability use Series Minimum Quantity / Packing Unit Quantity per reel PCC-M0530M/M0540M 2000 pcs. / box (2 reel) 1000 pcs. PCC-M0630M PCC-M0645M PCC-M0754M PCC-M0854M/M0850M 1000 pcs. / box (2 reel) 500 pcs. PCC-M1054M/M1050M PCC-M1050ML/M1060ML ● Power Choke Coils for consumer use Series Minimum Quantity / Packing Unit Quantity per reel PCC-M0512W 6000 pcs. / box (2 reel) 3000 pcs. PCC-M0730L 3000 pcs. / box (2 reel) 1500 pcs. PCC-M074L PCC-M0630L PCC-M0630W 2000 pcs. / box (2 reel) 1000 pcs. PCC-M104L PCC-M104W PCC-M125L PCC-D124H PCC-D125H 1000 pcs. / box (2 reel) 500 pcs. PCC-D126H PCC-D126F PCC-F126F Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Dec. 2013

Choke Coils Soldering Conditions ■ Refl ow soldering conditions T3 C) e (° T2 ur at perT1 m e T t1 t2 0 Time ● Pb free solder recommended temperature profi le Power Choke Coils for high reliability use Preheat Soldering Peak Temperature Time of Series T1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit Refl ow PCC-D1413H PCC-M0530M/M0540M PCC-M0630M/M0645M PCC-M0754M 150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s 2 times max. PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1050ML/M1060ML Power Choke Coils for consumer use Preheat Soldering Peak Temperature Time of Series T1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit Refl ow PCC-M0512W PCC-M0630L PCC-M0630W PCC-M0730L PCC-M074L PCC-M104L PCC-M104W 150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s 2 times max. PCC-M125L PCC-D124H PCC-D125H PCC-D126H PCC-D126F PCC-F126F Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Dec. 2013

Choke Coils Safety Precautions (Common precautions for Power Choke Coils for consumer use) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifi cations described in this catalog. • This catalog explains the quality and performance of the products as individual components. Bef ore use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipm ent where a defect in these products may cause the loss of human life or other signifi cant damage, such as damage to vehicles (aut o mob ile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heating ap plia nc es, comb us tion/gas equipment, rotating equipment, and disaster/crime prevention equipm ent. ✽Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1. Provision to abnormal condition This power choke coil itself does not have any protective function in abnormal condition such as overload, short-circuit and open-circuit conditions, etc. Therefore, it shall be confi rmed as the end product that there is no risk of smoking, fi re, dielectric withstand voltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuit in the end product. 2. Temperature rise Temperature rise of power choke coil depends on the installation condition in end products. It shall be confi rmed in the actual end product that temperature rise of power choke coil is in the limit of specifi ed temperature class. 3. Dielectric strength Dielectric withstanding test with higher voltage than specifi c value will damage Insulating material and shorten its life. 4. Water This Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation strength becomes very low in the condition. 5. Potting If this power choke coil is potted in some compound, coating material of magnet wire might be occasionally damaged. Please ask us if you intend to pot this power choke coil. 6. Detergent Please consult our company in case of this because the confi rmation of reliablility etc. is needed when the washing is used for the power choke coil. 7. Storage temperature -5 °C to +35 °C 8.Operating temperature Minimum temperature : -40 °C(Ambient temperature of the power choke coil) Maximum temperature : 130 °C(Ambient temperature of the power choke coil plus the temperature rise) 100 °C(Only series : PCC-F126F(N6)) 9. Model When this power choke coil was used in a similar or new product to the original one, sometimes it might be unable to satisfy the specifi cations due to difference of condition of usage. Please ask us if you would use this power choke coil in the manner such as above. 10. Drop If the power choke coil suffered mechanical stress such as drop, characteristics may become poor (due to damage on coil bobbin, etc.). Never use such stressed power choke coil. <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2012