EMI Cores ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Overview Applications The KEMET ESD-R series solid toroidal cores are designed • Consumer electronics to use on round cables. The wide range of Manganese Zinc • Air conditioners (MnZn) and Nickel Zinc (NiZn) options are available in bare, • Power conditioners coated, and case types and allows for targeting of specific • Refrigerators frequency ranges. • Washing machines • Industrial equipment EMI cores are part of a family of passive components, • Medical equipment which address the issues of noise or electromagnetic • Adapters interference (EMI) in circuits or systems. • Computers • Telecommunications Benefits • MnZn ≤ 10 MHz (AM band range) and NiZn ≤ 300 MHz (FM band range) options available • Solid construction • Bare, coated, and case types available • Wide range of products available Bare Type Coated Type Case Type One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Part Number System ESD- R- 10 D Core Size Series Shape Type Internal Management Code Outer Dimension Code (mm) ESD- Ring See Table 1 Turns and Impedance Characteristics Figure 1 – How to count turns When the desired performance of an EMI core cannot be obtained with a single pass through the core, the impedance characteristics can be changed with multiple turns. A turn is counted by the number of lead-wire windings which pass 1T 2T 3T through the inner hole of the core. Windings on the outside of the core do not count. Figure 2 – Relationship between impedance and turn count. (Representative example: ESD-R-16C) See Figure 1 for examples of one, two, and three turns. 10,000 Resonance point changes to lower band Adding turns will result in higher impedance while also lowering tSheee eFfifgeucrteiv 2e fforer qaune enxcaym rapnleg.e. Impedance (Ω)1,01001000 Impedance Increase 321TTT Core Material and Effective Frequency Range 1 1 10 100 1,000 There are two ferrite material options for KEMET Frequency (MHz) EMI Cores: Nickel Zinc (Ni-Zn) and Manganese Zinc (Mn-Zn). Each core material has a different Figure 3 – Effective band range of Mn-Zn and Ni-Zn ferrite core material. resistance and effective frequency range. The (Representative example, measured with same-dimension ring core) MnZn core material has a lower resistance 1,000 compared to the Ni-Zn; therefore, adequate insulation is required before use. AM band range FM band range The Ni-Zn core material is typically effective Ni-Zn series core Ω) 100 for frequencies in the MHz band range such as e ( the FM-band, while the Mn-Zn core material is anc Mn-Zn series core d e typically effective for the kHz band range such as p m the AM-band. See Figure 3. I 10 It is recommended to measure the actual frequency range effectiveness in the target 1 application. 0.01 0.1 1 10 100 1,000 Frequency (MHz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 4 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Mn-Zn Series Higher noise suppression effect in the lower frequency range S18H y S15H t i l i b a e m er 10,000 10H P c Lower magnetic permeability: ti Higher noise suppression effect e n 7H in the higher frequency range g a M 5H Ni-Zn Series 1400L 700L 0 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Environmental Compliance All KEMET EMI cores are RoHS compliant. Dimensions – Millimeters Bare and Coated Types Case Type ID ID OD T OD T See Table 1 for dimensions Installation Example © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Performance Characteristics Item Performance Characteristics Bare and coated: −25°C to +85°C Operating temperature Case : −25°C to +60°C Frequency range Low frequency and high frequency Outer diameter 9.5 – 61.0 mm Inner diameter 5.0 – 36.0 mm Thickness 3.0 – 28.8 mm Type Bare, coated, and case Case flame resistant rating UL94 V–2 Material MnZn 5H and NiZn 700L Table 1 – Ratings & Part Number Reference Dimensions (mm) Weight Frequency Range1 Material Compatible Part Type Color Toroid Core Number ≤ 10 MHz ≤ 300 MHz OD ID T (g) (Bare Type) MnZN NiZn (AM band range) (FM band range) ESD-R-10D 9.5 ±0.5 5.0 ±0.5 10.0 ±0.5 2.5 Bare — — X — 700L ESD-R-10E 10.0 ±0.5 5.0 ±0.4 5.0 ±0.4 1.5 Bare — — X — 700L ESD-R-10S 10.5 ±0.8 5.5 ±0.8 20.0 ±0.8 6.3 Bare — — X — 700L ESD-R-12C 11.8 ±0.7 7.3 ±0.8 15.0 ±0.7 5.0 Bare — — X — 700L ESD-R-12E 11.8 ±0.7 7.3 ±0.7 8.0 ±0.7 2.7 Bare — — X — 700L ESD-R-12F 12.0 ±0.5 8.5 ±0.5 15.0 ±0.5 4.1 Bare — — X — 700L ESD-R-12S 12.0 ±0.5 7.0 ±0.4 5.5 ±0.4 2.1 Bare — — X — 700L ESD-R-14C 14.0 ±0.7 7.0 ±0.7 3.0 ±0.7 1.7 Bare — — X — 700L ESD-R-14E 14.0 ±0.6 10.0 ±0.6 8.0 ±0.5 3.1 Bare — — X — 700L ESD-R-14S 14.3 ±0.5 6.3 ±0.5 28.5 ±0.8 17.1 Bare — — X — 700L ESD-R-15C-1 15.0 ±0.5 10.5 ±0.5 12.0 ±0.5 5.3 Bare — — X — 700L ESD-R-16 15.8 ±0.6 11.6 ±0.6 8.4 ±0.6 3.6 Bare — — X 5H — ESD-R-16C 16.0 ±0.7 9.0 ±0.7 17.0 ±0.7 11.2 Bare — — X — 700L ESD-R-17S 17.5 ±0.5 9.5 ±0.3 28.5 ±0.5 24.4 Bare — — X — 700L ESD-R-18SD 18.0 ±0.5 10.0 ±0.5 6.0 ±0.5 5.1 Bare — — X — 700L ESD-R-19S 18.5 ±1.0 10.0 ±1.0 10.0 ±1.0 10.4 Bare — — X 5H — ESD-R-19SD 18.5 ±1.0 10.0 ±1.0 10.0 ±1.0 10.0 Bare — — X — 700L ESD-R-22SD 22.5 ±0.7 13.8 ±0.5 6.4 ±0.5 7.8 Bare — — X — 700L ESD-R-25SD 25.0 ±0.5 15.0 ±0.5 12.0 ±0.3 18.5 Bare — — X — 700L ESD-R-25S 25.0 ±0.8 15.0 ±0.8 12.0 ±0.8 18.5 Bare — — X 5H — ESD-R-26S 26.0 ±0.5 13.0 ±0.3 28.5 ±0.5 53.3 Bare — — X — 700L ESD-R-27S 27.0 ±0.8 19.0 ±0.8 15.0 ±0.5 21.3 Bare — — X 10H — ESD-R-28C 28.0 ±0.8 16.0 ±0.5 13.0 ±0.6 27.3 Bare — — X — 700L ESD-R-31C 31.0 ±0.8 19.0 ±0.5 8.0 ±0.5 18.1 Bare — — X — 700L ESD-R-38D 38.1 ±1.0 19.0 ±0.7 12.7 ±0.7 53.0 Bare — — X 5H — ESD-R-47S 47.0 ±1.0 27.0 ±0.8 15.0 ±0.5 83.7 Bare — — X 5H — ESD-R-57D 57.0 ±1.5 36.0 ±1.5 20.0 ±0.7 139.1 Bare — — X — 700L ESD-R-57S 57.0 ±1.5 36.0 ±1.0 20.0 ±0.5 139.1 Bare — — X 5H — ≤ 10 MHz ≤ 300 MHz Part OD ID T (g) Compatible (AM band range) (FM band range) MnZn NiZn Type Color Toroid Core Number Dimensions Weight (Bare Type) Frequency Range1 Material 1 Frequency range is for reference only. Please test with actual device before use. * Other sizes available on request. Please contact KEMET. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Table 1 – Ratings & Part Number Reference cont. Dimensions (mm) Weight Frequency Range1 Material Compatible Part Type Color Toroid Core Number ≤ 10 MHz ≤ 300 MHz OD ID T (g) (Bare Type) MnZN NiZn (AM band range) (FM band range) ESD-R-12C-2 12.0 ±0.7 7.3 ±0.7 15.3 ±0.7 5.0 Coated Blue — X — 1400L ESD-R-12CM 12.0 ±0.5 7.0 ±0.5 15.0 ±0.7 5.0 Coated Gray ESD-R-12C X — 700L ESD-R-14A 15.0 Maximum 6.2 Minimum 3.5 Maximum 1.8 Coated Green — X 5H — ESD-R-14C-2 14.0 ±0.5 7.0 ±0.5 3.0 ±0.5 1.7 Coated Blue ESD-R-14C X — 700L ESD-R-15C 15.2 ±0.5 10.5 ±0.5 12.5 ±0.5 5.3 Coated Blue ESD-R-15C-1 X — 700L ESD-R-17S-1 17.7 ±0.5 9.4 ±0.3 28.8 ±0.5 24.4 Coated Blue ESD-R-17S X — 700L ESD-R-19E-1 19.0 ±0.5 10.7 ±0.5 5.3 ±0.5 6.0 Coated Blue — X — 700L ESD-R-25D-8 25.0 ±0.5 15.0 ±0.5 8.0 ±0.5 12.9 Coated Blue — X — 700L ESD-R-25L-A 25.3 ±0.8 15.1 ±0.8 12.1 ±0.8 19.4 Coated Blue ESD-R-25SD X — 700L ESD-R-25MK 25.3 ±0.6 14.8 ±0.6 12.3 ±0.6 21.0 Coated ESD-R-25S X 5H — ESD-R-28C-1 28.2 ±0.8 15.8 ±0.5 13.2 ±0.6 28.3 Coated Blue — X — 700L ESD-R-31C-1 32.0 Maximum 18.5 Minimum 9.0 Maximum 18.5 Coated Green ESD-R-31C X — 700L ESD-R-31-P 32.0 Maximum 19.0 Minimum 15.8 Maximum 32.2 Coated Green — X 5H — ESD-R-38-P 39.5 Maximum 18.0 Minimum 14.0 Maximum 52.8 Coated Green — X 5H — ESD-R-47-P 48.5 Maximum 26.0 Minimum 16.0 Maximum 84.8 Coated Green — X 5H — ESD-R-57-P 59.0 Maximum 34.0 Minimum 21.0 Maximum 140.9 Coated Green — X 5H — ESD-R-12D 12.9 ±1.0 6.0 ±1.0 6.4 ±1.0 2.4 Case Black ESD-R-12S X — 700L ESD-R-19 19.0 ±1.0 9.0 ±1.0 11.0 ±1.0 11.1 Case White ESD-R-19S X 5H — ESD-R-19D 19.0 ±1.0 9.0 ±1.0 11.0 ±1.0 10.7 Case Black ESD-R-19SD X — 700L ESD-R-25 26.0 ±1.0 14.0 ±1.0 15.0 ±1.0 20.4 Case White ESD-R-25S X 5H — ESD-R-25D 26.0 ±1.0 14.0 ±1.0 15.0 ±1.0 20.4 Case Black ESD-R-25SD X — 700L ESD-R-25D-1 26.0 ±1.0 14.0 ±1.0 15.0 ±1.0 21.0 Case Black with yellow tape ESD-R-25SD X — 700L ESD-R-38 39.0 ±0.8 17.5 ±0.8 14.0 ±0.8 55.3 Case White ESD-R-38D X 5H — ESD-R-38-1 39.0 ±1.0 17.5 ±1.0 14.0 ±1.0 56.0 Case White with yellow tape ESD-R-38D X 5H — ESD-R-38C-1 39.0 ±1.0 17.5 ±1.0 14.0 ±1.0 55.5 Case White with black tape — X — 700L ESD-R-38SA 39.0 ±0.8 17.5 ±0.8 14.0 ±0.8 56.0 Case White — X 10H — ESD-R-47 48.0 ±1.0 25.5 ±1.0 16.0 ±1.0 84.4 Case White — X 5H — ESD-R-47-1 50.0 Maximum 23.0 Minimum 18.0 Maximum 90.0 Case White with yellow tape ESD-R-47S X 5H — ESD-R-47D-1 48.0 ±1.0 25.5 ±1.0 16.0 ±1.0 84.6 Case White with black tape — X — 700L ESD-R-57 61.0 Maximum 32.4 ±1.0 24.0 Maximum 150.1 Case White — X 5H — ESD-R-57A-1 61.0 Maximum 32.4 ±1.0 24.0 Maximum 150.1 Case White with yellow tape ESD-R-57S X 5H — ESD-R-57D-1 61.0 Maximum 32.4 ±1.0 24.0 Maximum 154.2 Case White with black tape — X — 700L ≤ 10 MHz ≤ 300 MHz Part OD ID T (g) Compatible (AM band range) (FM band range) MnZn NiZn Type Color Toroid Core Number Dimensions Weight (Bare Type) Frequency Range1 Material 1 Frequency range is for reference only. Please test with actual device before use. * Other sizes available on request. Please contact KEMET. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency Bare Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Bare Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Bare Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Bare Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Bare Type Coated Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Coated Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Coated Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Coated Type Case Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Case Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Impedance vs. Frequency cont. Case Type © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Packaging Part Number Packaging Type Pieces per Box ESD-R-10D 3,600 ESD-R-10E 7,000 ESD-R-10S 1,260 ESD-R-12C 1,400 ESD-R-12E 1,500 ESD-R-12F 1,400 ESD-R-12S 1,500 ESD-R-14C 6,000 ESD-R-14E 2,400 ESD-R-14S 550 ESD-R-15C-1 800 ESD-R-16 780 ESD-R-16C 720 ESD-R-17S 440 ESD-R-18SD 1,664 ESD-R-19S 480 ESD-R-19SD 1,120 ESD-R-22SD 1,014 ESD-R-25SD 540 ESD-R-25S 300 ESD-R-26S 200 ESD-R-27S Tray ESD-R-28C 300 ESD-R-31C ESD-R-38D 200 ESD-R-47S 100 ESD-R-57D 75 ESD-R-57S 60 ESD-R-12C-2 1,400 ESD-R-12CM 1,500 ESD-R-14A 6,000 ESD-R-14C-2 ESD-R-15C 800 ESD-R-17S-1 440 ESD-R-19E-1 800 ESD-R-25D-8 600 ESD-R-25L-A 540 ESD-R-25MK 400 ESD-R-28C-1 ESD-R-31C-1 300 ESD-R-31-P ESD-R-38-P 200 ESD-R-47-P 100 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 17 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) Packaging cont. Part Number Packaging Type Pieces per Box ESD-R-57-P 60 ESD-R-12D 2,000 ESD-R-19 480 ESD-R-19D ESD-R-25 ESD-R-25D 300 ESD-R-25D-1 ESD-R-38 ESD-R-38-1 Tray 200 ESD-R-38C-1 ESD-R-38SA ESD-R-47 ESD-R-47-1 100 ESD-R-47D-1 ESD-R-57 ESD-R-57A-1 60 ESD-R-57D-1 Handling Precautions EMI Cores should be stored in normal working environments. While the EMI Cores themselves are quite robust in other environments, avoid exposure to high temperatures, high humidity, corrosive atmospheres and long term storage for case, snap-on and split types. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 75% relative humidity. Atmospheres should be free of chlorine, sulfur and alkali bearing compounds. Avoid also storage near strong magnetic fields as this might magnetize the product. Temperature fluctuations should be minimized to avoid condensation or cracks on the parts. Mechanical shocks can bring to cracks as well. Export Control For customers in Japan For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan EMI Core products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 18 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

EMI Core – ESD-R Toroidal Cores for Round Cables for Low & High Frequency (Bare, coated & with case) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5001_ESD-R • 3/31/2020 19 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: ESD-R-19S ESD-R-28C ESD-R-28C-1 ESD-R-47D-1 ESD-R-57D-1 ESD-R-19D ESD-R-19 ESD-R-14E ESD-R- 12C ESD-R-16C ESD-R-10E ESD-R-10D ESD-R-15C-1 ESD-R-25L-A ESD-R-15C ESD-R-14C ESD-R-25S ESD-R-18SD ESD-R-14S ESD-R-25SD ESD-R-12S ESD-R-17S-1 ESD-R-57 ESD-R-47 ESD-R-38 ESD-R-14A ESD-R-26S ESD-R-12C-2 ESD-R-38D ESD-R-17S ESD-R-31C ESD-R-19SD ESD-R-25D ESD-R-25D-8 ESD-R- 12D ESD-R-14C-2 ESD-R-16 ESD-R-38C-1 ESD-R-25 ESD-R-12E ESD-R-12F ESD-R-38-P ESD-R-47-P ESD- R-47S ESD-R-57-P ESD-R-57S ESD-R-10S ESD-R-19E-1 ESD-R-22SD ESD-R-31C-1 ESD-R-31-P ESD-R-38SA ESD-R-47-1 ESD-R-57A-1 ESD-R-57D ESD-R-12CM ESD-R-25D-1 ESD-R-25MK ESD-R-27S ESD-R-38-1