Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

E S 3 A June 2016 - E S 3 J — ES3A - ES3J F a Fast Rectifiers s t R e c t i f i e Features r s • For Surface Mount Applications • Glass-Passivated Junction • Low-Profile Package • Easy Pick and Place • Built-in Strain Relief SMC/DO-214AB • Superfast Recovery Times for High Efficiency COLOR BAND DENOTES CATHODE Ordering Information Part Number Top Mark Package Packing Method ES3A ES3A DO-214AB (SMC) Tape and Reel ES3B ES3B DO-214AB (SMC) Tape and Reel ES3C ES3C DO-214AB (SMC) Tape and Reel ES3D ES3D DO-214AB (SMC) Tape and Reel ES3J ES3J DO-214AB (SMC) Tape and Reel Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi- tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at T = 25°C unless otherwise noted. A Value Symbol Parameter Unit ES3A ES3B ES3C ES3D ES3J V Maximum Repetitive Reverse Voltage 50 100 150 200 600 V RRM Average Rectified Forward Current, I 3.0 A F(AV) .375” Lead Length at T = 75°C A Non-Repetitive Peak Forward Surge Current I 100 A FSM 8.3 ms Single Half-Sine Wave T T Operating Junction and Storage Temperature Range -50 to +150 C J, STG © 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com ES3A - ES3J Rev. 2.11

E S Thermal Characteristics 3 A Values are at TA = 25°C unless otherwise noted. - E Symbol Parameter Value Unit S 3 J PD Power Dissipation 1.66 W — Thermal Resistance, Maximum Land Pattern: 16 x 16 mm 47 R C/W F JA Junction to Ambient(1) Minimum Land Pattern: 2.6 x 3.2 mm 125 a s Thermal Resistance, Maximum Land Pattern: 16 x 16 mm 12 t R R C/W JL Junction to Lead(1) Minimum Land Pattern: 2.6 x 3.2 mm 16 e c t i Note: f i e 1. Device mounted on FR-4 PCB 0.013 mm. r s Electrical Characteristics Values are at T = 25°C unless otherwise noted. A Value Symbol Parameter Conditions Unit ES3A ES3B ES3C ES3D ES3J V Maximum Forward Voltage I = 3.0 A 0.95 1.70 V F F I = 0.5 A, Typ. 20 35 F t Reverse Recovery Time I = 1.0 A, ns rr R Max. 30 45 I = 0.25 A RR Maximum Reverse Current TA = 25C 10 I A R at Rated VR TA = 100C 500 C Total Capacitance V = 4.0 V, f = 1.0 MHz 45 pF T R © 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com ES3A - ES3J Rev. 2.11 2

E S Typical Performance Characteristics 3 A - E S 3 100 J A]3.5 — ward Current, I [F2.235 SINGLE PHASE Current, I[A]F 101 ES3A-ES3D ES3J Fast Re or1.5 HALF WAVE d c Rectified F0.15 R.IL63N0EE7DHNS5UZ"GIS C(TT9TH.II0VVSmEE m OL)RO L AEDAD Forwar 0.1 TPAu=ls2e5 WoCidth = 300us tifiers e 2% Duty Cycle Averag 00 25 A5m0bient7 T5empe1r0a0ture1 [2ºC5] 150 175 0.010.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward Voltage Drop, V[V] F Figure 1. Forward Current Derating Curve Figure 2. Foward Voltage Characteristics 100 1000 90 F] 80 T A = 100 º C p 100 [T 70 A] ance, C 5600 μnt, I [ R 10 T A = 75 º C pacit 3400 Curre al Ca 20 verse 1 T A = 25 º C Tot 10 Re 0 0.1 0.1 0.5 1 5 10 20 50100 500 0 20 40 60 80 100 120 140 Reverse Voltage, VR [V] Percent of Rated Peak Reverse Voltage [%] Figure 3. Total Capacitance Figure 4. Reverse Current vs. Reverse Voltage 50 50 trr NONINDUCTIVE NONINDUCTIVE +0.5A (-) DUT 0 Pulse 50V Generator -0.25A (approx) (Note 2) (+) 50 OSCILLOSCOPE NONINDUCTIVE (Note 1) -1.0A 1.0cm SET TIME BASE FOR NOTES: 5/ 10 ns/ cm 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. Figure 5. Reverse Recovery Time Characteristic and Test Circuit Diagram © 1999 Fairchild Semiconductor Corporation www.fairchildsemi.com ES3A - ES3J Rev. 2.11 3

8.15 B 7.75 1.96 6.25 3.27 3.39 5.55 2.75 B 6.81 A 7.15 0.13 M C B A LAND PATTERN RECOMMENDATION 6.60 TOP VIEW 8° R0.15 0° 2.45 A 2.65 MAX 4X 1.90 GAGE C PLANE 0.41 0.15 SEATING PLANE 0.203 0.30 4.70 0.050 B 0.05 8° 4.40 0.45 0.13 M C B A 1.60 0° 0.75 SIDE VIEW DETAIL A NOTES: SCALE 2:1 A. EXCEPT WHERE NOTED, CONFORMS TO JEDEC DO-214, VARIATION AB B DOES NOT COMPLY TO JEDEC STD. VALUE C. ALL DIMENSIONS ARE IN MILLIMETERS D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR PROTRUSIONS. E. DIMENSIONS AND TOLERANCING AS PER ASME Y14.5-2009 F. LAND PATTERN STANDARD: DIOM7957X241M G. DRAWING FILENAME: MKT-DO214ABrev2

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: ES3J