Precision Thick Film Chip Resistors Precision Thick Film Chip Resistors Type: ERJ XG, 1G ERJ 1R, 2R, 3R, 6R ERJ 3E, 6E, 8E, 14, 12, 1T Features ● Small size and lightweight ● High reliability Metal glaze thick fi lm resistive element and three layers of electrodes ● Compatible with placement machines Taping packaging available ● Suitable for both refl ow and fl ow soldering ● Low Resistance Tolerance ERJXG, 1G, 2R, 3E, 6E, 8E, 14, 12, 1T Type : ±1 % ERJ1R, 2R, 3R, 6R Type : ±0.5 % ● Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualifi ed (Exemption ERJXG, ERJ1R) ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers ● ERJ1R, 2R, 3R, 6R Type, ±0.5 % 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 R B D 1 0 0 2 V Product Code Size, Power Rating T.C.R. Marking Resistance Tolerance Packaging Methods Thick Film Code Inch Power R. Code T.C.R. Code Tolerance Code Packaging Part No. Chip Resistors 1R 0201 0.05 W H ±50×10–6/˚C (1R, 2R) D ±0.5 % Pressed Carrier Taping C ERJ1R 2R 0402 0.063 W B ±50×10–6/˚C (3R, 6R) 2 mm pitch, 15,000 pcs. 3R 0603 0.1 W K ±100×10–6/˚C (2R) Punched Carrier Taping X ERJ2R 6R 0805 0.1 W E ±100×10–6/˚C (3R, 6R) 2 mm pitch, 10,000 pcs. Punched Carrier Taping ERJ3R V 4 mm pitch, 5,000 pcs. ERJ6R Resistance Value The first three digits are significant figures of resistance and the last one denotes number of zeros following. Example: 1002 →10k Ω Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09 Aug. 2018

Precision Thick Film Chip Resistors ● ERJXGN, 1GN, 2RC, 2RK, 3EK, 6EN, 8EN, 14N, 12N, 12S, 1TN Type, ±1% 1 2 3 4 5 6 7 8 9 10 11 12 E R J 8 E N F 1 0 0 2 V Product Code Size, Power Rating Resistance Tolerance Packaging Methods Thick Film Code Inch Power R. Code Tolerance Code Packaging Part No. Chip Resistors XGN 01005 0.031 W F ±1 % Pressed Carrier Taping Y 1GN 0201 0.05 W W8P2, 20,000 pcs. ERJXGN 2RC 0402 0.1 W Embossed Carrier Taping U 2RK 0402 0.1 W W4P1, 40,000 pcs. 3EK 0603 0.1 W Resistance Value Pressed Carrier Taping 6EN 0805 0.125 W The first three digits are significant figures C 2 mm pitch, 15,000 pcs. ERJ1GN 8EN 1206 0.25 W of resistance and the last one denotes Punched Carrier Taping ERJ2RC X 14N 1210 0.5 W number of zeros following. 2 mm pitch, 10,000 pcs.ERJ2RK 12N 1812 0.75 W Decimal point is expressed by "R". ERJ3EK 12S 2010 0.75 W Example : 1002 → 10k Ω V P4 umnmch peidtc Ch,a 5rr,i0e0r 0Ta ppcinsg. ERJ6EN ERJ8EN 1TN 2512 1 W ERJ14N Embossed Carrier Taping ERJ12N 4 mm pitch, 5,000 pcs. U ERJ12S Embossed Carrier Taping ERJ1TN 4 mm pitch, 4,000 pcs. Construction Dimensions in mm (not to scale) L a W Protective coating t Alumina substrate Electrode (Inner) b Dimensions (mm) Mass (Weight) Part No. L W a b t [g/1000 pcs.] ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 Electrode ERJ1G, 1R 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15 (Between) ERJ2R□ 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 EERRJJ33REK□ 1.60±0.15 0.80+–00..0155 0.30±0.20 0.30±0.15 0.45±0.10 2 Thick film EERRJJ66REN□ 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4 resistive element Electrode (Outer) ERJ8EN 3.20+–00..2005 1.60+–00..1055 0.50±0.20 0.50±0.20 0.60±0.10 10 ERJ14N 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 ERJ12N 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27 ERJ12S 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27 ERJ1TN 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09 Aug. 2018

Precision Thick Film Chip Resistors Ratings <±0.5 %> Power Rating Limiting Element Maximum Overload Resistance Resistance Category Part No. T.C.R. AEC-Q200 at 70 °C (4) Voltage (1) Voltage (2) Tolerance Range Temperature Range (inch size) (×10–6/°C) Grade (W) (V) (V) (%) (Ω) (°C) ERJ1RH 1k to 1M 0.05 15 30 ±0.5 ±50 –55 to +125 – (0201) (E24, E96) ERJ2RH 100 to 100k 0.063 50 100 ±0.5 ±50 –55 to +155 Grade 0 (0402) (E24, E96) 10 to 97.6 ERJ2RK 0.063 50 100 ±0.5 102k to 1M ±100 –55 to +155 Grade 0 (0402) (E24, E96) ERJ3RB 100 to 100k 0.1 50 100 ±0.5 ±50 –55 to +155 Grade 0 (0603) (E24, E96) 10 to 97.6 ERJ3RE 0.1 50 100 ±0.5 102k to 1M ±100 –55 to +155 Grade 0 (0603) (E24, E96) ERJ6RB 100 to 100k 0.1 150 200 ±0.5 ±50 –55 to +155 Grade 0 (0805) (E24, E96) 10 to 97.6 ERJ6RE 0.1 150 200 ±0.5 102k to 1M ±100 –55 to +155 Grade 0 (0805) (E24, E96) <±1 %> Power Rating Limiting Element Maximum Overload Resistance Resistance Category Part No. T.C.R. AEC-Q200 at 70 °C (4) Voltage (1) Voltage (2) Tolerance Range Temperature Range (inch size) (×10–6/°C) Grade (W) (V) (V) (%) (Ω) (°C) ERJXGN 10 to 1 M(3) <100 Ω : ±300 (01005) 0.031 15 30 ±1 (E24, E96) 100 Ω ≤ : ±200 –55 to +125 – ERJ1GN 10 to 1 M(3) 0.05 25 50 ±1 ±200 –55 to +125 Grade 1 (0201) (E24, E96) ERJ2RC 1 to 9.76 0.1 50 100 ±1 –100 to +600 –55 to +155 Grade 0 (0402) (E24, E96) ERJ2RK 10 to 1 M 0.1 50 100 ±1 ±100 –55 to +155 Grade 0 (0402) (E24, E96) ERJ3EK 10 to 1 M 0.1 75 150 ±1 ±100 –55 to +155 Grade 0 (0603) (E24, E96) ERJ6EN 10 to 2.2 M 0.125 150 200 ±1 ±100 –55 to +155 Grade 0 (0805) (E24, E96) ERJ8EN 10 to 2.2 M 0.25 200 400 ±1 ±100 –55 to +155 Grade 0 (1206) (E24, E96) ERJ14N 10 to 1 M 0.5 200 400 ±1 ±100 –55 to +155 Grade 0 (1210) (E24, E96) ERJ12N 10 to 1 M 0.75 200 500 ±1 ±100 –55 to +155 Grade 0 (1812) (E24, E96) ERJ12S 10 to 1 M 0.75 200 500 ±1 ±100 –55 to +155 Grade 0 (2010) (E24, E96) ERJ1TN 10 to 1 M 1 200 500 ±1 ±100 –55 to +155 Grade 0 (2512) (E24, E96) (1) Rated Continuous Working Voltage (RCWV) shall be det er mined from RCWV=√Power Rating × Re sis tance Values, or Limiting Element Voltage liste d above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less. (3) Please contact us when you need a type with a resistance of less than 10 Ω. (4) Use it on the condition that the case temperature is below the upper category temperature. Power Derating Curve –55 °C 70 °C For resistors operated in ambient temperatures above 100 7w0it h° Cth,e pfiogwuerer orant itnhge rsighahltl. be derated in accordance d (%) 6800 23RE,, 63ER,, 86ER,, oa 14, 12, 1T L d 40 e XG, 1G, 1R Rat 20 155 °C 125 °C 0 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09 Aug. 2018

Precision Thick Film Chip Resistors Perfomance ● ERJ1R, 2R, 3R, 6R Type, ±0.5%(D) Performance Test Item Test Conditions Requirements Within Specifi ed Resistance 20 °C Tolerance Within Specifi ed T. C. R. +25 °C/+125 °C T. C. R. Overload ±2% Rated Voltage × 2.5, 5 s Resistance to Soldering Heat ±1% 270 °C, 10 s Rapid Change of ±1% –55 °C (30min.) / +155 °C (ERJ1R : +125 °C) (30min.), 100 cycles Temperature High Temperature ±1% +155 °C (ERJ1R : +125 °C) , 1000 h Exposure Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h ±2% 60 °C, 90% to 95 %RH, Rated Voltage, Load Life in Humidity ERJ1R: ±3% 1.5 h ON/0.5 h OFF cycle, 1000 h ±2% Endurance at 70 °C 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h ERJ1R: ±3% ● ERJXGN, 1GN, 2RC, 2RK, 3EK, 6EN, 8EN, 14N, 12N, 12S, 1TN Type, ±1%(F) Performance Test Item Test Conditions Requirements Within Specifi ed Resistance 20 °C Tolerance Within Specifi ed T. C. R. +25 °C/+155 °C (ERJXG, ERJ1G : +25 °C/+125 °C) T. C. R. Overload ±2% Rated Voltage × 2.5, 5 s Resistance to Soldering Heat ±1% 270 °C, 10 s Rapid Change of –55 °C (30min.) / +155 °C (ERJXG, ERJ1G : +125 °C) (30min.), ±1% Temperature 100 cycles High Temperature ±1% +155 °C (ERJXG, ERJ1G : +125 °C) , 1000 h Exposure Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h ±2% 60 °C, 90% to 95 %RH, Rated Voltage, Load Life in Humidity ERJXG, ERJ1G: ±3% 1.5 h ON/0.5 h OFF cycle, 1000 h ±2% Endurance at 70 °C 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h ERJXG, ERJ1G: ±3% Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09 Aug. 2018

Surface Mount Resistors Safety precautions Safety Precautions (Common precautions for Surface Mount Resistors) The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur. 2. Keep the rated power and ambient temperature within the specified derating curve. Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or amb ie nt tem per a tures can become factors in the rise of the temperature of the res is tors, regardless of the level of power applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral components. Make sure to contact us before using the resistors under special conditions. 3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired. 4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the per for mance and reliability of the resistors. 5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.). 6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder. 7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors' protective coatings and bodies may be chipped, affecting their performance. 9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress. 10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of imm er sion. 11. Transient voltage If there is a possibility that the transient phen om e non (significantly high voltage ap plied in a short time) may occ ur or that a high voltage pulse may be applied, make sure to evaluate and check the chara ct er is tics of Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated pow er limit or steady-state conditions to complete the des ign or decide to use the resistors. 12. Do not apply excessive tension to the terminals. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014

Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipm ent where a defect in these products may cause the loss of human life or other significant dam age, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sing le fault (1) Precautions for use • These products are designed and manufactured for general and standard use in general elect ron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. • Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the performance or reliability of the products. • Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arr iv al at your company, provided that they remain packed as they were when delivered and stored at a temp er a ture of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. 01 Sep. 2014