Thick Film Chip Resistors / Low Resistance Type Thick Film Chip Resistors / Low Resistance Type Type: ERJ 2LW, 3LW, 6LW 2BW, 3BW, 6BW, 8BW, 6CW, 8CW ERJ 2B, 3B, 6D, 6B, 8B, 14B, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR ERJ L03, L06, L08, L14, L12, L1D, L1W Features ● Current Sensing resistor ● Small size and lightweight ● Realize both low-resistance & High-precision by original thick fi lm resistive element & special electrode structure ● Suitable for both refl ow and fl ow sold er ing ● Realize High-power by double-sided resistive elements structure that aimed to suppress temperature rising : ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW ● Low TCR : ±75×10–6/°C (ERJ6CW, 8CW) ● Low Resistance Value : Thick fi lm resistors available from 5m Ω (ERJ3LW, 6LW) ● Reference Standards : IEC 60115-8, JIS C 5201-8, JEITA RC-2144 ● AEC-Q200 qualifi ed ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers ● ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW <High power (double-sided resistive elements structure) type> 1 2 3 4 5 6 7 8 9 10 11 12 E R J 2 B W G R 0 4 7 X Product Code Code Inch Power Rating Resistance Value Resistance Tolerance Resistance Value Packaging Methods Thick Film 2LW 0402 0.2 W 10m Ω Code Tolerance Shown by 4 digits or letters. Code Packaging Part No. Chip Resistors 3LW 0603 0.25 W 5m Ω,10m Ω D ± 0.5 %✽ (Ex.) R047 : 0.047 Ω=47m Ω Pressed Carrier Taping ERJ2LW 6LW 0805 0.5 W 5, 6, 7, 8, 9m Ω F ± 1 % X 2 mm pitch, 10,000 pcs. ERJ2BW 2BW 0402 0.25 W 47m Ω to 100m Ω G ± 2 % ERJ3LW 3BW 0603 0.33 W 20m Ω to 100m Ω J ± 5 % ERJ6LW 6BW 0805 0.5 W 10m Ω to 100m Ω Punched Carrier Taping ERJ3BW 8BW 1206 1 W 10m Ω to 100m Ω ✽ Please refer to the rating table V 4 mm pitch, 5,000 pcs. ERJ6BW 6CW 0805 0.5 W 10m Ω to 30m Ω for the resistance tolerance ERJ8BW ERJ6CW 8CW 1206 1 W 10m Ω to 50m Ω ERJ8CW Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 Feb. 2018

Thick Film Chip Resistors / Low Resistance Type ● ERJ2BS/2BQ, 3BS/3BQ, 6BS/6BQ, 8BS/8BQ, 14BS/14BQ, 6D, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR <High power type/Standard type> 1 2 3 4 5 6 7 8 9 10 11 E R J 8 R Q F R 2 2 V Product Code Size, Power Rating Resistance Value Resistance Tolerance Packaging Methods Thick Film Type Inch Power R. Code Res. Value Code Tolerance Code Packaging Part No. Chip Resistors 2B 0402 0.166 W S 0.1 Ω to 0.2 Ω D ± 0.5 %✽ Punched Carrier Taping 3B 0603 0.25 W Q 0.22 Ω to 9.1 Ω✽ F ± 1 % X 2 mm pitch, 10,000 pcs. ERJ2B 3R 0603 0.1 W ✽ 2B : 0.22 Ω to 1.0 Ω G ± 2 % ERJ3B/3R Punched Carrier Taping 6D 0805 0.5 W J ± 5 % V ERJ6D/6B/6R 4 mm pitch, 5,000 pcs. 6B 0805 0.33 W ✽ Please refer to the ERJ8B/8R 6R 0805 0.125 W rating table for the ERJ14B/14R resistance tolerance Embossed Carrier Taping 8B 1206 0.5 W ERJ12R 4 mm pitch, 5,000 pcs. 8R 1206 0.25 W Resistance Value U ERJ12Z 14B 1210 0.5 W Shown by 3 digits or letters. Embossed Carrier Taping ERJ1TR 14R 1210 0.25 W Only when it is D (E24,E96) 4 mm pitch, 4,000 pcs. or F (E96), shown by 12R 1812 0.5 W 4 digits or letters. 12Z 2010 0.5 W (Ex.) R22 : 0.22 Ω 1TR 2512 1 W R102 : 0.102 Ω ● ERJL03, L06, L08, L14, L12, L1D, L1W <Low TCR type> 1 2 3 4 5 6 7 8 9 10 11 12 E R J L 1 4 K J 5 0 M U Product Code Size, Power Rating Code Res. Value Resistance Tolerance Packaging Methods Thick Film Type Inch Power R. Std. ✽ Code Tolerance Code Packaging Part No. Chip Resistors L03 0603 0.2 W K 2309mm ΩΩ,, 2427mm ΩΩ,, 3530mm ΩΩ,, F ± 1 % Punched Carrier Taping ERJL03 L06 0805 0.25 W 100m Ω J ± 5 % V ERJL06 L08 1206 0.33 W U 20m Ω to 100m Ω✽ 4 mm pitch, 5,000 pcs. ERJL08 L14 1210 0.33 W ✽ L03, L06, L08 : 47m Ω to 100m Ω ERJL14 L12 1812 0.5 W L1D, L1W : 40m Ω to 100m Ω Embossed Carrier Taping ERJL12 4 mm pitch, 5,000 pcs. L1D 2010 0.5 W U ERJL1D Resistance Value L1W 2512 1 W Shown by 3 digits or letters. Embossed Carrier Taping ERJL1W (Ex.) 50M:50m Ω, 10 C:100m Ω 4 mm pitch, 3,000 pcs. Ratings <High power (double-sided resistive elements structure) type> Power Rating (2) Resistance Resistance (1) Category Part No. T.C.R. AEC-Q200 (inch size) at (7W0 )°C Tole(%ra)nce R(aΩn)ge (×10–6/°C) Temper(a°tuCre) Range Grade ERJ2LW (0402) 0.2 ±1, ±2, ±5 10m 0 to 500 –55 to +125 Grade 1 5m 0 to 700 –55 to +125 ERJ3LW (0603) 0.25 ±1, ±2, ±5 Grade 1 10m 0 to 300 –55 to +125 ERJ6LW (0805) 0.5 ±1, ±2, ±5 5, 6, 7, 8, 9m 0 to 300 –55 to +125 Grade 1 ERJ2BW (0402) 0.25 ±1, ±2, ±5 47m to 100m (E24) ±300 –55 to +155 Grade 0 20m Ω ≤ R < 39m Ω : ±250 ERJ3BW (0603) 0.33 ±1, ±2, ±5 20m to 100m (E24) –55 to +155 Grade 0 39m Ω ≤ R ≤ 100m Ω : ±150 10m Ω ≤ R < 15m Ω : ±300 ERJ6BW (0805) 0.5 ±1, ±2, ±5 10m to 100m (E24) –55 to +155 Grade 0 15m Ω ≤ R ≤ 100m Ω : ±200 10m Ω ≤ R < 20m Ω : ±200 ERJ8BW (1206) 1 ±1, ±2, ±5 10m to 100m (E24) 20m Ω ≤ R < 47m Ω : ±150 –55 to +155 Grade 0 47m Ω ≤ R ≤ 100m Ω : ±100 ERJ6CW (0805) 0.5 ±0.5, ±1, ±2, ±5 10m to 30m (E24) ±75 –55 to +125 Grade 1 ERJ8CW (1206) 1 ±1, ±2, ±5 10m to 50m (E24) ±75 –55 to +125 Grade 1 (1) Please contact us when resistors of irregular series are needed. (2) Use it on the condition that the case temperature is below the upper category temperature. · Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = √　Power Rating × Resistance Values. · Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 Feb. 2018

Thick Film Chip Resistors / Low Resistance Type Ratings <High power type> Power Rating (2) Resistance (3) Resistance (1) Category Part No. T.C.R. AEC-Q200 at 70 °C Tolerance Range Temperature Range (inch size) (×10–6/°C) Grade (W) (%) (Ω) (°C) ERJ2BS (0402) 0.10 to 0.20 (E24) ±300 0.166 ±1, ±2, ±5 –55 to +155 Grade 0 ERJ2BQ (0402) 0.22 to 1.0 (E24) ±250 ERJ3BS (0603) 0.10 to 0.20 (E24) ±300 0.25 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ3BQ (0603) 1.0 to 9.1 (E24) ±200 ERJ6DS (0805) ±0.5, ±1, 0.10 to 0.20 (E24, E96) ±150 0.5 –55 to +155 Grade 0 ERJ6DQ (0805) ±2, ±5 0.22 to 9.1 (E24, E96) ±100 ERJ6BS (0805) 0.10 to 0.20 (E24) ±250 0.33 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ6BQ (0805) 1.0 to 9.1 (E24) ±200 ERJ8BS (1206) 0.10 to 0.20 (E24) ±250 0.5 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ8BQ (1206) 1.0 to 9.1 (E24) ±200 ERJ14BS (1210) 0.10 to 0.20 (E24) ±200 0.5 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ14BQ (1210) 1.0 to 9.1 (E24) ±100 (1) Please contact us when resistors of irregular series are needed. (2) Use it on the condition that the case temperature is below the upper category temperature. (3) E96 series also have ±0.5 %, ±1 % line-up. · Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = 　√Power Rating × Resistance Values. · Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV. <Standard type> Power Rating (2) Resistance Resistance (1) Category Part No. T.C.R. AEC-Q200 at 70 °C Tolerance Range Temperature Range (inch size) (×10–6/°C) Grade (W) (%) (Ω) (°C) ERJ3RS (0603) 0.10 to 0.20 (E24) ±300 0.1 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ3RQ (0603) 1.0 to 9.1 (E24) ±200 ERJ6RS (0805) 0.10 to 0.20 (E24) ±250 0.125 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ6RQ (0805) 1.0 to 9.1 (E24) ±200 ERJ8RS (1206) 0.10 to 0.20 (E24) ±250 0.25 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ8RQ (1206) 1.0 to 9.1 (E24) ±200 ERJ14RS (1210) 0.10 to 0.20 (E24) ±200 0.25 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ14RQ (1210) 1.0 to 9.1 (E24) ±100 ERJ12RS (1812) 0.10 to 0.20 (E24) ±200 0.5 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ12RQ (1812) 1.0 to 9.1 (E24) ±100 ERJ12ZS (2010) 0.10 to 0.20 (E24) ±200 0.5 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ12ZQ (2010) 1.0 to 9.1 (E24) ±100 ERJ1TRS (2512) 0.10 to 0.20 (E24) ±200 1 ±1, ±2, ±5 0.22 to 0.91 (E24) –55 to +155 Grade 0 ERJ1TRQ (2512) 1.0 to 9.1 (E24) ±100 (1) Please contact us when resistors of irregular series are needed. (2) Use it on the condition that the case temperature is below the upper category temperature. · Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = 　√Power Rating × Resistance Values. · Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 Feb. 2018

Thick Film Chip Resistors / Low Resistance Type <Low TCR type> Power Rating (2) Resistance Resistance (1) Category Part No. T.C.R. AEC-Q200 (inch size) at (7W0 )°C Tole(%ra)nce R(aΩn)ge (×10–6/°C) Tempera(°tuCre) Range Grade ERJL03 (0603) 0.2 ±1, ±5 47m to 100m ±200 –55 to +125 Grade 1 ERJL06 (0805) 0.25 ±1, ±5 47m to 100m ±100 –55 to +125 Grade 1 ERJL08 (1206) 0.33 ±1, ±5 47m to 100m ±100 –55 to +125 Grade 1 ERJL14 (1210) 0.33 ±1, ±5 20m to 100m –55 to +125 Grade 1 ERJL12 (1812) 0.5 ±1, ±5 20m to 100m R < 47m Ω : ±300 –55 to +125 Grade 1 ERJL1D (2010) 0.5 ±1, ±5 40m to 100m R ≥ 47m Ω : ±100 –55 to +125 Grade 1 ERJL1W (2512) 1 ±1, ±5 40m to 100m –55 to +125 Grade 1 (1) Standard R.V. : 20m Ω, 22m Ω, 33m Ω, 39m Ω, 47m Ω, 50m Ω, 100m Ω, Custom R.V. : Each 1m Ω within upper range. (2) Use it on the condition that the case temperature is below the upper category temperature. ∙ Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = √　Power Rating × Resistance Values. · Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV. Construction Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure below. Protective coating Electrode (Inner) 100–55 °C 70 °C Alumina Electrode substrate (Between) %) 80 ad ( 60 o L d 40 e at 155 °C Trehsiciskti vfielm element Electrode (Outer) R 20 125 °C 0 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) Dimensions in mm (not to scale) L a W t b Dimensions (mm) Mass(Weight) Dimensions (mm) Mass(Weight) Part No. Part No. L W a b t [g/1000 pcs.] L W a b t [g/1000 pcs.] ERJ2LW 1.00±0.10 0.50+–00..0150 0.25±0.10 0.25±0.10 0.40±0.05 0.8 ERJ8BW 3.20±0.20 1.60±0.20 1.00±0.20 1.00±0.20 0.65±0.10 13 ERJ2BW 1.00±0.10 0.50+–00..0150 0.24±0.10 0.24±0.10 0.35±0.05 0.8 E(1R0 tJo8 1C6mW Ω) 3.20±0.20 1.60±0.20 1.10±0.20 1.10±0.20 0.65±0.10 13 ERJ2BS ERJ2BQ 1.00±0.10 0.50+–00..0150 0.20±0.10 0.27±0.10 0.35±0.05 0.8 E(1R8 tJo8 5C0mW Ω) 3.20±0.20 1.60±0.20 0.60±0.20 0.60±0.20 0.65±0.10 13 E(5RmJ 3ΩL)W 1.60±0.15 0.80±0.15 0.50±0.20 0.50±0.20 0.55±0.10 3 ERJ8R ERJ3LW ERJ8B 3.20+–00..0250 1.60+–00..1055 0.50±0.20 0.50±0.20 0.60±0.10 10 (10m Ω) 1.60±0.15 0.80±0.15 0.40±0.20 0.40±0.20 0.55±0.10 3 ERJL08 ERJ3BW ERJ14R ERJ3R ERJ14B 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 ERJ3B 1.60±0.15 0.80+–00..1055 0.30±0.20 0.30±0.15 0.45±0.10 2 ERJL14 ERJL03 ERJ12R ERJ6LW 2.00±0.20 1.25±0.20 0.63±0.20 0.63±0.20 0.70±0.10 6 ERJL12 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27 ERJ6BW 2.00±0.20 1.25±0.20 0.55±0.20 0.55±0.20 0.65±0.10 6 ERJ12Z 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27 ERJ6CW ERJL1D (10 to 13m Ω) 2.05±0.20 1.30±0.20 0.60±0.20 0.60±0.20 0.65±0.10 6 ERJ1TR 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 E(1R5 tJo6 3C0mW Ω) 0.45±0.20 0.45±0.20 ERJL1W 6.40±0.20 3.20±0.20 0.65±0.20 1.30±0.20 1.10±0.10 79 ERJ6D 2.00±0.20 1.25±0.10 0.40±0.20 0.55±0.25 0.60±0.10 5 ERJ6R ERJ6B 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 5 ERJL06 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 Feb. 2018

Thick Film Chip Resistors / Low Resistance Type Performance ● ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW <High power (double-sided resistive elements structure) type> Performance Test Item Test Conditions Requirements Within Specifi ed Resistance 20 °C Tolerance Within Specifi ed T. C. R. +25 °C/+125 °C T. C. R. Rated Voltage × 2.0, 5 s Overload ±2% ERJ6LW : × 1.77, 5 s ERJ8BW (R > 0.05 Ω) : × 1.77, 5 s Resistance to Soldering Heat ±1% 270 °C, 10 s Rapid Change of ±1% –55 °C (30 min.) / +155 °C (ERJ✽LW, ERJ✽CW : +125 °C) (30 min.)， Temperature ERJ2LW : ±2% 100 cycles High Temperature Exposure ±1% +155 °C (ERJ✽LW, ERJ✽CW : +125 °C), 1000 h Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h 60 °C, 90% to 95%RH, Rated Voltage, Load Life in Humidity ±3% 1.5 h ON/0.5 h OFF cycle, 1000 h Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h ● ERJ2BS/2BQ, 3BS/3BQ, 6BS/6BQ, 8BS/8BQ, 14BS/14BQ, 6D, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR <High power type/Standard type> Performance Test Item Test Conditions Requirements Within Specifi ed Resistance 20 °C Tolerance Within Specifi ed T. C. R. +25 °C/+125 °C T. C. R. Overload ±2% Rated Voltage × 2.5 (ERJ6D : × 1.77), 5 s Resistance to Soldering Heat ±1% 270 °C, 10 s Rapid Change of ±1% –55 °C (30 min.) / +155 °C (30 min.), 100 cycles Temperature High Temperature Exposure ±1% +155 °C, 1000 h Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h 60 °C, 90% to 95%RH, Rated Voltage, Load Life in Humidity ±3% 1.5 h ON/0.5 h OFF cycle, 1000 h Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h ● ERJL03, L06, L08, L14, L12, L1D, L1W <Low TCR type> Performance Test Item Test Conditions Requirements Within Specifi ed Resistance 20 °C Tolerance Within Specifi ed T. C. R. +25 °C/+125 °C T. C. R. Overload ±2% Rated Voltage × 2.5, 5 s Resistance to Soldering Heat ±1% 270 °C, 10 s Rapid Change of ±1% –55 °C (30 min.) / +125 °C (30 min.), 100 cycles Temperature High Temperature Exposure ±1% +125 °C, 1000 h Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h 60 °C, 90% to 95%RH, Rated Voltage, Load Life in Humidity ±3% 1.5 h ON/0.5 h OFF cycle, 1000 h Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 Feb. 2018

Surface Mount Resistors Safety precautions Safety Precautions (Common precautions for Surface Mount Resistors) The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur. 2. Keep the rated power and ambient temperature within the specified derating curve. Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or amb ie nt tem per a tures can become factors in the rise of the temperature of the res is tors, regardless of the level of power applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral components. Make sure to contact us before using the resistors under special conditions. 3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired. 4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the per for mance and reliability of the resistors. 5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.). 6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder. 7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors' protective coatings and bodies may be chipped, affecting their performance. 9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress. 10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of imm er sion. 11. Transient voltage If there is a possibility that the transient phen om e non (significantly high voltage ap plied in a short time) may occ ur or that a high voltage pulse may be applied, make sure to evaluate and check the chara ct er is tics of Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated pow er limit or steady-state conditions to complete the des ign or decide to use the resistors. 12. Do not apply excessive tension to the terminals. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014

Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipm ent where a defect in these products may cause the loss of human life or other significant dam age, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sing le fault (1) Precautions for use • These products are designed and manufactured for general and standard use in general elect ron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. • Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the performance or reliability of the products. • Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arr iv al at your company, provided that they remain packed as they were when delivered and stored at a temp er a ture of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. 01 Sep. 2014