REVISION AF DESIGNED & DIMENSIONED ERF8-XXX-XX.X-X-DV-XXXX-TR IN MILLIMETERS[INCHES] No OF POSITIONS TAPE & REEL DO NOT C "A" REF (PER ROW) (STANDARD PACKAGING) SCALE FROM (SEE SHT 2, TABLE 4) -005, -010, -011, -013, -020, -023, -025, (NOT AVAILABLE IN 100 POS) -030, -035, -040, -049, -050, -060, (SEE NOTE 4 & 7) THIS PRINT "B" REF -070, -075,-100 OPTION (SEE SHT 2, TABLE 4) AF(-100 POSITION AVAILABLE IN -05.0 ONLY -K: POLYIMIDE FILM PAD (SEE FIG 2) SEE NOTE 9) 59 POSITION #1 01 -0L5E.A0D = S5TmYLmE - L : SLAEET CNHOETSE ( 5-0, 5S.E0E LFEIAGD 5 )STYLE ONLY, INDICATOR -07.0 = 7mm -EGP: EXTENDED GUIDE POST **-10.0 = 10mm (SEE NOTE 6, SEE FIG 3) -EGPS: EXTENDED GUIDE POST SHIELD 3.36 .132 5.60 .220 PLATING SPECIFICATION (ONLY AVAILABLE IN ***-10.0 REF REF LEAD STYLE AND ONLY -10, -20, -L: 10µ" SELECTIVE GOLD IN CONTACT AREA, -25 & -30 POSITIONS SEE FIG 6) MATTE TIN ON TAIL (USE C-211-XX.X-L) *** -L2: LATCH WITH LONG WELD TAB (-05.0 & -07.0 LEAD STYLE ONLY, C -S: 30µ" SELECTIVE GOLD IN CONTACT AREA, 60 0.800 .0315 (TYP) 02 MATTE TIN ON TAIL SEE FIG 5) (TOL. NON-ACCUM) (USE C-211-XX.X-S) *** -E: EXTENDED GUIDE POST WITH LONG WELD TAB, SEE FIG 3) C *** -W: WELD TAB (-05.0 & -07.0 LEAD STYLE "C" (SEE SHT 2, TABLE 4) ROW SPECIFICATION ONLY, SEE FIG 10) -DV: DOUBLE VERTICAL 3.35 .132 REF ERF8-XXX-XX.X-DV-01 "A" ** = NOT TOOLED (SEE TABLE 3) *** = NOT RELEASED FOR PRODUCTION 2.58±0.12 .101±.005 "E" REF C 5.40 .213 REF 1.24 .049 REF 1.10 .043 1.32 .052 REF "A" REF 0.50 [.020] x 45 REF C "C" C 1.32 .052 "N" C-211-XX.X-X REF (SEE SHT 2, TABLE 4) (REF) (SEE TABLE 3) "F"(TYP) DETAIL 'D' 3 MAX SWAY (SEE SHT 2, TABLE 5) SCALE 4 : 1 (TYP) 'D' CL 0.23RE.0F09 1.04 .0(421 PL CRESF) SEE TABLE 1 CL C CL 0.90 .036 REF 5.41±0.25 .213±.010 1.50 .059 REF C 0.800 .0315 (TYP) C (TOL NON-ACCUM) SECTION "A"-"A" "D" REF (SEE SHT 2, TABLE 4) SCALE 5 : 1 FIG 1 (ERF8-030-05.0-X-DV-XX SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN NOTES: MILLIMETERS [INCHES]. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED 1. C REPRESENTS A CRITICAL DIMENSION. DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR 2. BURR ALLOWANCE: 0.038[.0015] MAX. X.X: 0.3 [.01] 2 DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 34.. FMOINR IQMUUAMN PTUITSIEHSO UUPT TFOO R4C9 EP:I E2C.2E2S ,N N [O.5 LLEBA.]DER, TRAILER, OR EIA-481-D XX..XXXXX: : 0.01.30 5[.00 0[.50]020] POCUOBRTNPAOSINESNEEDT O O WTFHI TSEHARO MTUHTTAE CTNH, ETINH EACXT.P RWEHSISCEDH IWT RWITATESN PeH-MOaNiEl : 8in1f2o-@94S4A-M67T3E3C . c o mFA X : 8 1c2o-d94e8 -555034272 REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER, MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: TRAILOR WILL BE SUPPLIED. INSULATOR: LCP, COLOR: BLACK 0.8MM EDGE RATE SOCKET ASSEMBLY 5. NOT AVAILABLE WITH -EGP, -E, -W, -L2 OR -EGPS OPTIONS. CONTACT & LATCHES: BeCu 6. OPTION ONLY AVAILABLE ON -07.0 LEAD STYLE. SHIELD: PHOS BRONZE DWG. NO. 7. -TR PACKAGING NOT AVAILABLE ON 100 POSITION ONLY AVAILABLE IN TRAYS. ERF8-XXX-XX.X-X-DV-XXXX-TR 8. NOTE DELETED. AF 9. NOT AVAILABLE WITH -L, -L2, -E, OR -W OPTIONS. BY:KNOWLDEN 9/26/2005 SHEET 1 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW

REVISION AF C C "H" C 0.11±0.076 .004±.003 0.50[.020] CL 0.20+-00..25 .008+-..000280 (TYP) 3 MAX SWAY C CL (TYP) "G" 6.00 .236 FIG 2 -K OPTION (USE K-500-300) C-211-XX.X-X IN-PROCESS VIEW (ERF8-030-XX.X-X-DV-K SHOWN) "C" "C" "J" REF (SEE SHT 3, TABLE 6) 1.03 .040 SEE TABLE 3 1.90 .075 REF REF 7.00 .276 7.25 .285 REF 5.10 .201 C REF REF WT-30-XX-T (SEE TABLE 3) "U" "T" C 2 MAX SWAY (TYP) C "L" (SEE SHT 3, TABLE 6) FIG 3 SECTION "C"-"C" -E AND -EGP OPTION SCALE 2.5 : 1 (ERF8-030-07.0-X-DV-EGP SHOWN) (SAME AS FIG 1, EXCEPT AS SHOWN) (AVAILABLE ON -07.0 LEAD STYLE ONLY) (CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info@SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 ERF8-XXX-XX.X-X-DV-XXXX-TR (** = NOT TOOLED) BY:KNOWLDEN 9/26/2005 SHEET 2 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW

REVISION AF 0.80 .031 AF CL "E" "B" "B" DETAIL "E" SCALE 6 : 1 CL C "K" 0.25 2.10 .083 C REF "J" REF DETAIL 'G' "M" C SCALE 6 : 1 0.50[.020] CL 2.50 .098 C CL 'G' CL "U" CL "T" 6.00 .236 WT-30-XX-F (SEE SHT 2, TABLE 3) FIG 5 (ERF8-025-05.0-X-DV-K-L SHOWN) 0.25 .010 REF C (SAME AS FIG 1 & 2, EXCEPT AS SHOWN) 2 MAX SWAY (TYP) 0.64 .025 (CENTER FEATURES REMOVED FOR CLARITY) REF C "L" PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION SECTION "B"-"B" CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED SCALE 3 : 1 OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info@SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 SHEET 3 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW

REVISION AF CL "F" "F" C 6.200 .2441 C 6.80 .268 "P" 7.20 .283 REF CL CL CL 6.25 .246 7.00 .276 REF C "T" (SEE SHT 2, TABLE 3) 0.64 .025 SH29-XX-XX-X 0.64 .025 REF (TYP) (SEE SHT 2, TABLE 3) "U" REF REF "S" REF 5.95 .234 (SEE SHT 2, TABLE 3) "R" REF CL REF CL ERF8-XXX-07.0-DV-EGPS CL (SEE SHT 2, TABLE 3) C 0.25 .010 2° MAX SWAY REF (TYP) C "Q" SECTION "F"-"F" FIG 6 (ERF8-030-07.0-X-EGPS SHOWN) (SAME AS FIG 3, EXCEPT AS SHOWN) (AVAILABLE ON -07.0 LEAD STYLE ONLY) (CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info@SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 3:1 ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 SHEET 4 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW

REVISION AF "J" REF (SEE SHT 3, TABLE 6) 2.58±0.12 .101±.005 C "J" 5.40 .213 REF 1.24 .049 REF "H" ERF8-XXX-05.0-DV-S WT-67-02-X (2 PLCS) C-314-01.0-X "E" "F" ERF8H-XXX-05.0-DV C SEE SHT 1, TABLE 1 "H" 5.41+0.18 .213+.007 "D" REF -0.13 -.005 (SEE SHT 2, TABLE 4) C "J" SECTION "H"-"H" 1.04 .041 SECTION "J"-"J" REF FIG 7 (**ERF8-030-10.0-X-DV SHOWN) (CENTER FEATURES REMOVED FOR CLARITY) ** NOT TOOLED 2.10 .083 REF "K" 0.80 .031 WT-67-01-X (2 PLCS) "L" 0.64 .025 REF 0.94 .037 (SEE SHT 3, TABLE 6) REF WT-30-03-F "K" C SECTION "K"-"K" FIG 9 (**ERF8-030-07.0-X-DV-L SHOWN) (SAME AS FIG 5, EXCEPT AS SHOWN) FIG 8 (CENTER FEATURES REMOVED FOR CLARITY) -EGPS OPTIONS ** NOT TOOLED (**ERF8-030-10.0-X-DV-L SHOWN) (SAME AS FIG 7, EXCEPT AS SHOWN) PROPRIETARY NOTE ** NOT TOOLED THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 ERF8-XXX-XX.X-X-DV-XXXX-TR BY:KNOWLDEN 9/26/2005 SHEET 5 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW

REVISION AF -05.0 SHOWN -07.0 SHOWN -07.0 WITH EGP SHOWN -07.0 WITH EGPS SHOWN **-10.0 WITH -L SHOWN "L" "L" CL C "J" REF 'U' REF (SEE SHT 2, TABLE 3) 'T' (SEE SHT 2, TABLE 3) C WT-30-05-X (SEE TABLE 3) SECTION "L"-"L" SCALE 3 : 1 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED FIG 10 OR TRANSFERRED TO OTHER DOCUMENTS OR (ERF8-025-05.0-X-DV-W SHOWN) DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 (SAME AS FIG 5 EXCEPT AS SHOWN) POUBRTPAOINSEED O WTHITEHRO TUHTA TNH ETH EAXTP RWEHSISCEDH IWT RWITATESN PHONE: 812-944-6733 FAX: 812-948-5047 (CENTER FEATURES REMOVED FOR CLARITY) CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 ERF8-XXX-XX.X-X-DV-XXXX-TR BY: KNOWLDEN 9/26/2005 SHEET 6 OF 6 F:\DWG\MISC\MKTG\ERF8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW