图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: EPM7128STC100-15
  • 制造商: altera
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

EPM7128STC100-15产品简介:

ICGOO电子元器件商城为您提供EPM7128STC100-15由altera设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 EPM7128STC100-15价格参考¥161.54-¥538.45。alteraEPM7128STC100-15封装/规格:嵌入式 - CPLD(复杂可编程逻辑器件), 。您可以下载EPM7128STC100-15参考资料、Datasheet数据手册功能说明书,资料中有EPM7128STC100-15 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)

描述

IC CPLD 128MC 15NS 100TQFP

产品分类

嵌入式 - CPLD(复杂可编程逻辑器件)

I/O数

84

品牌

Altera

数据手册

点击此处下载产品Datasheethttp://www.altera.com/literature/ds/pkgds.pdf#page=67-68

产品图片

产品型号

EPM7128STC100-15

rohs

含铅 / 不符合限制有害物质指令(RoHS)规范要求

产品系列

MAX® 7000S

产品目录页面

点击此处下载产品Datasheet

供应商器件封装

100-TQFP(14x14)

其它名称

544-1212
EPM7128STC10015

包装

托盘

可编程类型

系统内可编程

安装类型

表面贴装

宏单元数

128

封装/外壳

100-TQFP

工作温度

0°C ~ 70°C

延迟时间tpd(1)最大值

15.0ns

栅极数

2500

标准包装

90

电源电压-内部

4.75 V ~ 5.25 V

逻辑元件/块数

8

推荐商品

型号:LC4128ZC-42MN132C

品牌:Lattice Semiconductor Corporation

产品名称:集成电路(IC)

获取报价

型号:5M570ZF256I5N

品牌:Intel

产品名称:集成电路(IC)

获取报价

型号:LC4032C-5T44C

品牌:Lattice Semiconductor Corporation

产品名称:集成电路(IC)

获取报价

型号:EPM3064ATI100-10

品牌:Intel

产品名称:集成电路(IC)

获取报价

型号:5M1270ZF256I5N

品牌:Intel

产品名称:集成电路(IC)

获取报价

型号:XA2C64A-8VQG44Q

品牌:Xilinx Inc.

产品名称:集成电路(IC)

获取报价

型号:GAL16V8D-15LPN

品牌:Lattice Semiconductor Corporation

产品名称:集成电路(IC)

获取报价

型号:XC9572XL-10VQG64C

品牌:Xilinx Inc.

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
EPM7128STC100-15 相关产品

EPM7160SLC84-10N

品牌:Intel

价格:

EPM7256SQC208-10

品牌:Intel

价格:¥1218.86-¥1385.07

ISPLSI 1024-60LJI

品牌:Lattice Semiconductor Corporation

价格:

XC9536XL-7CSG48I

品牌:Xilinx Inc.

价格:¥39.52-¥39.52

EPM7128EQC160-12

品牌:Intel

价格:¥64.11-¥64.11

EPM3256ATC144-10N

品牌:Intel

价格:¥53.20-¥63.84

EPM570GT144C4N

品牌:Intel

价格:¥215.32-¥274.05

EPM3064ALI44-10N

品牌:Intel

价格:

PDF Datasheet 数据手册内容提取

MAX 7000 Programmable Logic ® Device Family September 2005, ver. 6.7 Data Sheet Features... ■ High-performance, EEPROM-based programmable logic devices (PLDs) based on second-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface available in MAX7000S devices – ISP circuitry compatible with IEEE Std. 1532 ■ Includes 5.0-V MAX 7000 devices and 5.0-V ISP-based MAX 7000S devices ■ Built-in JTAG boundary-scan test (BST) circuitry in MAX 7000S devices with 128 or more macrocells ■ Complete EPLD family with logic densities ranging from 600 to 5,000 usable gates (see Tables1 and 2) ■ 5-ns pin-to-pin logic delays with up to 175.4-MHz counter frequencies (including interconnect) ■ PCI-compliant devices available f For information on in-system programmable 3.3-V MAX 7000A or 2.5-V MAX 7000B devices, see the MAX 7000A Programmable Logic Device Family Data Sheet or the MAX 7000B Programmable Logic Device Family Data Sheet. Table 1.MAX 7000 Device Features Feature EPM7032 EPM7064 EPM7096 EPM7128E EPM7160E EPM7192E EPM7256E Usable 600 1,250 1,800 2,500 3,200 3,750 5,000 gates Macrocells 32 64 96 128 160 192 256 Logic array 2 4 6 8 10 12 16 blocks Maximum 36 68 76 100 104 124 164 user I/O pins t (ns) 6 6 7.5 7.5 10 12 12 PD t (ns) 5 5 6 6 7 7 7 SU t (ns) 2.5 2.5 3 3 3 3 3 FSU t (ns) 4 4 4.5 4.5 5 6 6 CO1 f (MHz) 151.5 151.5 125.0 125.0 100.0 90.9 90.9 CNT Altera Corporation 1 DS-MAX7000-6.7

MAX 7000 Programmable Logic Device Family Data Sheet Table 2.MAX 7000S Device Features Feature EPM7032S EPM7064S EPM7128S EPM7160S EPM7192S EPM7256S Usable gates 600 1,250 2,500 3,200 3,750 5,000 Macrocells 32 64 128 160 192 256 Logic array 2 4 8 10 12 16 blocks Maximum 36 68 100 104 124 164 user I/O pins t (ns) 5 5 6 6 7.5 7.5 PD t (ns) 2.9 2.9 3.4 3.4 4.1 3.9 SU t (ns) 2.5 2.5 2.5 2.5 3 3 FSU t (ns) 3.2 3.2 4 3.9 4.7 4.7 CO1 f (MHz) 175.4 175.4 147.1 149.3 125.0 128.2 CNT ...and More ■ Open-drain output option in MAX 7000S devices ■ Programmable macrocell flipflops with individual clear, preset, Features clock, and clock enable controls ■ Programmable power-saving mode for a reduction of over 50% in each macrocell ■ Configurable expander product-term distribution, allowing up to 32 product terms per macrocell ■ 44 to 208 pins available in plastic J-lead chip carrier (PLCC), ceramic pin-grid array (PGA), plastic quad flat pack (PQFP), power quad flat pack (RQFP), and 1.0-mm thin quad flat pack (TQFP) packages ■ Programmable security bit for protection of proprietary designs ■ 3.3-V or 5.0-V operation – MultiVoltTM I/O interface operation, allowing devices to interface with 3.3-V or 5.0-V devices (MultiVolt I/O operation is not available in 44-pin packages) – Pin compatible with low-voltage MAX 7000A and MAX 7000B devices ■ Enhanced features available in MAX7000E and MAX 7000S devices – Six pin- or logic-driven output enable signals – Two global clock signals with optional inversion – Enhanced interconnect resources for improved routability – Fast input setup times provided by a dedicated path from I/O pin to macrocell registers – Programmable output slew-rate control ■ Software design support and automatic place-and-route provided by Altera’s development system for Windows-based PCs and Sun SPARCstation, and HP 9000 Series 700/800 workstations 2 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet ■ Additional design entry and simulation support provided by EDIF 200 and 300 netlist files, library of parameterized modules (LPM), Verilog HDL, VHDL, and other interfaces to popular EDA tools from manufacturers such as Cadence, Exemplar Logic, Mentor Graphics, OrCAD, Synopsys, and VeriBest ■ Programming support – Altera’s Master Programming Unit (MPU) and programming hardware from third-party manufacturers program all MAX7000 devices – The BitBlasterTM serial download cable, ByteBlasterMVTM parallel port download cable, and MasterBlasterTM serial/universal serial bus (USB) download cable program MAX 7000S devices General The MAX 7000 family of high-density, high-performance PLDs is based on Altera’s second-generation MAX architecture. Fabricated with Description advanced CMOS technology, the EEPROM-based MAX7000 family provides 600 to 5,000 usable gates, ISP, pin-to-pin delays as fast as 5 ns, and counter speeds of up to 175.4 MHz. MAX7000S devices in the -5, -6, -7, and -10 speed grades as well as MAX7000 and MAX7000E devices in -5, -6, -7, -10P, and -12P speed grades comply with the PCI Special Interest Group (PCI SIG) PCILocal Bus Specification, Revision 2.2. See Table3 for available speed grades. Table 3.MAX 7000 Speed Grades Device Speed Grade -5 -6 -7 -10P -10 -12P -12 -15 -15T -20 EPM7032 v v v v v v EPM7032S v v v v EPM7064 v v v v v EPM7064S v v v v EPM7096 v v v v EPM7128E v v v v v v EPM7128S v v v v EPM7160E v v v v v EPM7160S v v v v EPM7192E v v v v EPM7192S v v v EPM7256E v v v v EPM7256S v v v Altera Corporation 3

MAX 7000 Programmable Logic Device Family Data Sheet The MAX7000E devices—including the EPM7128E, EPM7160E, EPM7192E, and EPM7256E devices—have several enhanced features: additional global clocking, additional output enable controls, enhanced interconnect resources, fast input registers, and a programmable slew rate. In-system programmable MAX 7000 devices—called MAX7000S devices—include the EPM7032S, EPM7064S, EPM7128S, EPM7160S, EPM7192S, and EPM7256S devices. MAX7000S devices have the enhanced features of MAX7000E devices as well as JTAG BST circuitry in devices with 128 or more macrocells, ISP, and an open-drain output option. See Table4. Table 4.MAX 7000 Device Features Feature EPM7032 All All EPM7064 MAX7000E MAX7000S EPM7096 Devices Devices ISP via JTAG interface v JTAG BST circuitry v(1) Open-drain output option v Fast input registers v v Six global output enables v v Two global clocks v v Slew-rate control v v MultiVolt interface (2) v v v Programmable register v v v Parallel expanders v v v Shared expanders v v v Power-saving mode v v v Security bit v v v PCI-compliant devices available v v v Notes: (1) Available only in EPM7128S, EPM7160S, EPM7192S, and EPM7256S devices only. (2) The MultiVolt I/O interface is not available in 44-pin packages. 4 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet The MAX7000 architecture supports 100% TTL emulation and high-density integration of SSI, MSI, and LSI logic functions. The MAX7000 architecture easily integrates multiple devices ranging from PALs, GALs, and 22V10s to MACH and pLSI devices. MAX 7000 devices are available in a wide range of packages, including PLCC, PGA, PQFP, RQFP, and TQFP packages. See Table5. Table 5.MAX 7000 Maximum User I/O Pins Note (1) Device 44- 44- 44- 68- 84- 100- 100- 160- 160- 192- 208- 208- Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin PLCC PQFP TQFP PLCC PLCC PQFP TQFP PQFP PGA PGA PQFP RQFP EPM7032 36 36 36 EPM7032S 36 36 EPM7064 36 36 52 68 68 EPM7064S 36 36 68 68 EPM7096 52 64 76 EPM7128E 68 84 100 EPM7128S 68 84 84 (2) 100 EPM7160E 64 84 104 EPM7160S 64 84 (2) 104 EPM7192E 124 124 EPM7192S 124 EPM7256E 132 (2) 164 164 EPM7256S 164 (2) 164 Notes: (1) When the JTAG interface in MAX 7000S devices is used for either boundary-scan testing or for ISP, four I/O pins become JTAG pins. (2) Perform a complete thermal analysis before committing a design to this device package. For more information, see the Operating Requirements for Altera Devices Data Sheet. MAX 7000 devices use CMOS EEPROM cells to implement logic functions. The user-configurable MAX 7000 architecture accommodates a variety of independent combinatorial and sequential logic functions. The devices can be reprogrammed for quick and efficient iterations during design development and debug cycles, and can be programmed and erased up to 100 times. Altera Corporation 5

MAX 7000 Programmable Logic Device Family Data Sheet MAX 7000 devices contain from 32 to 256 macrocells that are combined into groups of 16 macrocells, called logic array blocks (LABs). Each macrocell has a programmable-AND/fixed-OR array and a configurable register with independently programmable clock, clock enable, clear, and preset functions. To build complex logic functions, each macrocell can be supplemented with both shareable expander product terms and high- speed parallel expander product terms to provide up to 32 product terms per macrocell. The MAX 7000 family provides programmable speed/power optimization. Speed-critical portions of a design can run at high speed/full power, while the remaining portions run at reduced speed/low power. This speed/power optimization feature enables the designer to configure one or more macrocells to operate at 50% or lower power while adding only a nominal timing delay. MAX7000E and MAX7000S devices also provide an option that reduces the slew rate of the output buffers, minimizing noise transients when non-speed-critical signals are switching. The output drivers of all MAX7000 devices (except 44-pin devices) can be set for either 3.3-V or 5.0-V operation, allowing MAX7000 devices to be used in mixed-voltage systems. The MAX 7000 family is supported byAltera development systems, which are integrated packages that offer schematic, text—including VHDL, Verilog HDL, and the Altera Hardware Description Language (AHDL)— and waveform design entry, compilation and logic synthesis, simulation and timing analysis, and device programming. The software provides EDIF 2 0 0 and 3 0 0, LPM, VHDL, Verilog HDL, and other interfaces for additional design entry and simulation support from other industry- standard PC- and UNIX-workstation-based EDA tools. The software runs on Windows-based PCs, as well as Sun SPARCstation, and HP 9000 Series 700/800 workstations. f For more information on development tools, see the MAX+PLUS II Programmable Logic Development System & Software Data Sheet and the Quartus Programmable Logic Development System & Software Data Sheet. Functional The MAX 7000 architecture includes the following elements: Description ■ Logic array blocks ■ Macrocells ■ Expander product terms (shareable and parallel) ■ Programmable interconnect array ■ I/O control blocks 6 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet The MAX 7000 architecture includes four dedicated inputs that can be used as general-purpose inputs or as high-speed, global control signals (clock, clear, and two output enable signals) for each macrocell and I/O pin. Figure1 shows the architecture of EPM7032, EPM7064, and EPM7096 devices. Figure 1. EPM7032, EPM7064 & EPM7096 Device Block Diagram INPUT/GLCK1 INPUT/GCLRn INPUT/OE1 INPUT/OE2 LAB A LAB B I/O 8 to 16 Macrocells 36 36 Macrocells 8 to 16 I/O 8 to 16 Control 1 to 16 17 to 32 Control 8 to 16 I/O pins I/O pins Block Block 16 16 8 to 16 8 to 16 LAB C PIA LAB D I/O 8 to 16 Macrocells 36 36 Macrocells 8 to 16 I/O 8 to 16 Control 33 to 48 49 to 64 Control 8 to 16 I/O pins I/O pins Block Block 16 16 8 to 16 8 to 16 Altera Corporation 7

MAX 7000 Programmable Logic Device Family Data Sheet Figure2 shows the architecture of MAX 7000E and MAX 7000S devices. Figure 2. MAX 7000E & MAX 7000S Device Block Diagram INPUT/GCLK1 INPUT/OE2/GCLK2 INPUT/OE1 INPUT/GCLRn 6 Output Enables 6 Output Enables 6 to16 LAB A LAB B 6 to16 I/O 6 to16 Macrocells 36 36 Macrocells 6 to16 I/O 6 to 16 I/O Pins Control 1 to 16 17 to 32 Control 6 to 16 I/O Pins Block Block 16 16 6 6 to16 PIA 6 to16 6 6 to16 LAB C LAB D 6 to16 I/O 6 to16 Macrocells 36 36 Macrocells 6 to16 I/O 6 to 16 I/O Pins Control 33 to 48 49 to 64 Control 6 to 16 I/O Pins Block Block 16 16 6 6 to16 6 to16 6 Logic Array Blocks The MAX 7000 device architecture is based on the linking of high- performance, flexible, logic array modules called logic array blocks (LABs). LABs consist of 16-macrocell arrays, as shown in Figures1 and 2. Multiple LABs are linked together via the programmable interconnect array (PIA), a global bus that is fed by all dedicated inputs, I/O pins, and macrocells. 8 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Each LAB is fed by the following signals: ■ 36 signals from the PIA that are used for general logic inputs ■ Global controls that are used for secondary register functions ■ Direct input paths from I/O pins to the registers that are used for fast setup times for MAX 7000E and MAX 7000S devices Macrocells The MAX 7000 macrocell can be individually configured for either sequential or combinatorial logic operation. The macrocell consists of three functional blocks: the logic array, the product-term select matrix, and the programmable register. The macrocell of EPM7032, EPM7064, and EPM7096 devices is shown in Figure3. Figure 3. EPM7032, EPM7064 & EPM7096 Device Macrocell Global Global Logic Array Clear Clocks From 2 I/O pin Parallel Logic Expanders Fast Input Programmable (from other Select Register macrocells) Register Bypass To I/O Control PRN Block D/T Q Product- Clock/ TTTerm Enable ENA Select Select CLRN Matrix VCC Clear Select Shared Logic to PIA Expanders 36 Signals 16 Expander from PIA ProductTTTerms Altera Corporation 9

MAX 7000 Programmable Logic Device Family Data Sheet Figure4 shows a MAX7000E and MAX 7000S device macrocell. Figure 4. MAX 7000E & MAX 7000S Device Macrocell Global Global Logic Array Clear Clocks from 2 I/O pin Parallel Logic Expanders Fast Input Programmable (from other Select Register macrocells) Register Bypass to I/O Control PRN Block D/T Q Product- Clock/ Term Enable ENA Select Select CLRN Matrix VCC Clear Select Shared Logic to PIA Expanders 36 Signals 16 Expander from PIA Product Terms Combinatorial logic is implemented in the logic array, which provides five product terms per macrocell. The product-term select matrix allocates these product terms for use as either primary logic inputs (to the OR and XOR gates) to implement combinatorial functions, or as secondary inputs to the macrocell’s register clear, preset, clock, and clock enable control functions. Two kinds of expander product terms (“expanders”) are available to supplement macrocell logic resources: ■ Shareable expanders, which are inverted product terms that are fed back into the logic array ■ Parallel expanders, which are product terms borrowed from adjacent macrocells The Altera development system automatically optimizes product-term allocation according to the logic requirements of the design. For registered functions, each macrocell flipflop can be individually programmed to implement D, T, JK, or SR operation with programmable clock control. The flipflop can be bypassed for combinatorial operation. During design entry, the designer specifies the desired flipflop type; the Altera development software then selects the most efficient flipflop operation for each registered function to optimize resource utilization. 10 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Each programmable register can be clocked in three different modes: ■ By a global clock signal. This mode achieves the fastest clock-to- output performance. ■ By a global clock signal and enabled by an active-high clock enable. This mode provides an enable on each flipflop while still achieving the fast clock-to-output performance of the global clock. ■ By an array clock implemented with a product term. In this mode, the flipflop can be clocked by signals from buried macrocells or I/O pins. In EPM7032, EPM7064, and EPM7096 devices, the global clock signal is available from a dedicated clock pin, GCLK1, as shown in Figure1. In MAX 7000E and MAX 7000S devices, two global clock signals are available. As shown in Figure2, these global clock signals can be the true or the complement of either of the global clock pins, GCLK1 or GCLK2. Each register also supports asynchronous preset and clear functions. As shown in Figures3 and 4, the product-term select matrix allocates product terms to control these operations. Although the product-term-driven preset and clear of the register are active high, active-low control can be obtained by inverting the signal within the logic array. In addition, each register clear function can be individually driven by the active-low dedicated global clear pin (GCLRn). Upon power-up, each register in the device will be set to a low state. All MAX7000E and MAX 7000S I/O pins have a fast input path to a macrocell register. This dedicated path allows a signal to bypass the PIA and combinatorial logic and be driven to an input D flipflop with an extremely fast (2.5 ns) input setup time. Expander Product Terms Although most logic functions can be implemented with the five product terms available in each macrocell, the more complex logic functions require additional product terms. Another macrocell can be used to supply the required logic resources; however, the MAX 7000 architecture also allows both shareable and parallel expander product terms (“expanders”) that provide additional product terms directly to any macrocell in the same LAB. These expanders help ensure that logic is synthesized with the fewest possible logic resources to obtain the fastest possible speed. Altera Corporation 11

MAX 7000 Programmable Logic Device Family Data Sheet Shareable Expanders Each LAB has 16 shareable expanders that can be viewed as a pool of uncommitted single product terms (one from each macrocell) with inverted outputs that feed back into the logic array. Each shareable expander can be used and shared by any or all macrocells in the LAB to build complex logic functions. A small delay (t ) is incurred when SEXP shareable expanders are used. Figure5 shows how shareable expanders can feed multiple macrocells. Figure 5. Shareable Expanders Shareable expanders can be shared by any or all macrocells in an LAB. Macrocell Product-Term Logic Product-Term Select Matrix Macrocell Product-Term Logic 36 Signals 16 Shared from PIA Expanders Parallel Expanders Parallel expanders are unused product terms that can be allocated to a neighboring macrocell to implement fast, complex logic functions. Parallel expanders allow up to 20 product terms to directly feed the macrocell OR logic, with five product terms provided by the macrocell and 15 parallel expanders provided by neighboring macrocells in the LAB. 12 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet The compiler can allocate up to three sets of up to five parallel expanders automatically to the macrocells that require additional product terms. Each set of five parallel expanders incurs a small, incremental timing delay (t ). For example, if a macrocell requires 14 product terms, the PEXP Compiler uses the five dedicated product terms within the macrocell and allocates two sets of parallel expanders; the first set includes five product terms and the second set includes four product terms, increasing the total delay by 2×t . PEXP Two groups of 8 macrocells within each LAB (e.g., macrocells 1 through 8 and 9through 16) form two chains to lend or borrow parallel expanders. A macrocell borrows parallel expanders from lower- numbered macrocells. For example, macrocell 8 can borrow parallel expanders from macrocell 7, from macrocells 7 and 6, or from macrocells 7, 6, and 5. Within each group of 8, the lowest-numbered macrocell can only lend parallel expanders and the highest-numbered macrocell can only borrow them. Figure6 shows how parallel expanders can be borrowed from a neighboring macrocell. Figure 6. Parallel Expanders Unused product terms in a macrocell can be allocated to a neighboring macrocell. From Previous Macrocell Preset Product- Macrocell Term Select Product- Matrix Term Logic Clock Clear Preset Product- Macrocell Term Product- Select Term Logic Matrix Clock Clear To Next Macrocell 36 Signals 16 Shared from PIA Expanders Altera Corporation 13

MAX 7000 Programmable Logic Device Family Data Sheet Programmable Interconnect Array Logic is routed between LABs via the programmable interconnect array (PIA). This global bus is a programmable path that connects any signal source to any destination on the device. All MAX 7000 dedicated inputs, I/O pins, and macrocell outputs feed the PIA, which makes the signals available throughout the entire device. Only the signals required by each LAB are actually routed from the PIA into the LAB. Figure7 shows how the PIA signals are routed into the LAB. An EEPROM cell controls one input to a 2-input AND gate, which selects a PIA signal to drive into the LAB. Figure 7. PIA Routing To LAB PIA Signals While the routing delays of channel-based routing schemes in masked or FPGAs are cumulative, variable, and path-dependent, the MAX 7000 PIA has a fixed delay. The PIA thus eliminates skew between signals and makes timing performance easy to predict. I/O Control Blocks The I/O control block allows each I/O pin to be individually configured for input, output, or bidirectional operation. All I/O pins have a tri-state buffer that is individually controlled by one of the global output enable signals or directly connected to ground or V . Figure8 shows the I/O CC control block for the MAX 7000 family. The I/O control block of EPM7032, EPM7064, and EPM7096 devices has two global output enable signals that are driven by two dedicated active-low output enable pins (OE1 and OE2). The I/O control block of MAX 7000E and MAX7000S devices has six global output enable signals that are driven by the true or complement of two output enable signals, a subset of the I/O pins, or a subset of the I/O macrocells. 14 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure 8. I/O Control Block of MAX 7000 Devices EPM7032, EPM7064 & EPM7096 Devices VCC OE1 OE2 GND From Macrocell To PIA MAX 7000E & MAX 7000S Devices Six Global Output Enable Signals PIA VCC GND To Other I/O Pins From Macrocell Open-Drain Output (1) Slew-Rate Control Fast Input to Macrocell Register To PIA Note: (1) The open-drain output option is available only in MAX 7000S devices. Altera Corporation 15

MAX 7000 Programmable Logic Device Family Data Sheet When the tri-state buffer control is connected to ground, the output is tri-stated (high impedance) and the I/O pin can be used as a dedicated input. When the tri-state buffer control is connected to V , the output is CC enabled. The MAX 7000 architecture provides dual I/O feedback, in which macrocell and pin feedbacks are independent. When an I/O pin is configured as an input, the associated macrocell can be used for buried logic. In-System MAX 7000S devices are in-system programmable via an industry-standard 4-pin Joint Test Action Group (JTAG) interface (IEEE Programma- Std. 1149.1-1990). ISP allows quick, efficient iterations during design bility (ISP) development and debugging cycles. The MAX 7000S architecture internally generates the high programming voltage required to program EEPROM cells, allowing in-system programming with only a single 5.0 V power supply. During in-system programming, the I/O pins are tri-stated and pulled-up to eliminate board conflicts. The pull-up value is nominally 50 k¾. ISP simplifies the manufacturing flow by allowing devices to be mounted on a printed circuit board with standard in-circuit test equipment before they are programmed. MAX 7000S devices can be programmed by downloading the information via in-circuit testers (ICT), embedded processors, or the Altera MasterBlaster, ByteBlasterMV, ByteBlaster, BitBlaster download cables. (The ByteBlaster cable is obsolete and is replaced by the ByteBlasterMV cable, which can program and configure 2.5-V, 3.3-V, and 5.0-V devices.) Programming the devices after they are placed on the board eliminates lead damage on high-pin-count packages (e.g., QFP packages) due to device handling and allows devices to be reprogrammed after a system has already shipped to the field. For example, product upgrades can be performed in the field via software or modem. In-system programming can be accomplished with either an adaptive or constant algorithm. An adaptive algorithm reads information from the unit and adapts subsequent programming steps to achieve the fastest possible programming time for that unit. Because some in-circuit testers cannot support an adaptive algorithm, Altera offers devices tested with a constant algorithm. Devices tested to the constant algorithm have an “F” suffix in the ordering code. The JamTM Standard Test and Programming Language (STAPL) can be used to program MAX 7000S devices with in-circuit testers, PCs, or embedded processor. 16 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet f For more information on using the Jam language, refer to AN 122: Using Jam STAPL for ISP & ICR via an Embedded Processor. The ISP circuitry in MAX7000S devices is compatible with IEEE Std. 1532 specification. The IEEE Std. 1532 is a standard developed to allow concurrent ISP between multiple PLD vendors. Programming Sequence During in-system programming, instructions, addresses, and data are shifted into the MAX 7000S device through the TDI input pin. Data is shifted out through the TDO output pin and compared against the expected data. Programming a pattern into the device requires the following six ISP stages. A stand-alone verification of a programmed pattern involves only stages 1, 2, 5, and 6. 1. Enter ISP. The enter ISP stage ensures that the I/O pins transition smoothly from user mode to ISP mode. The enter ISP stage requires 1ms. 2. Check ID. Before any program or verify process, the silicon ID is checked. The time required to read this silicon ID is relatively small compared to the overall programming time. 3. Bulk Erase. Erasing the device in-system involves shifting in the instructions to erase the device and applying one erase pulse of 100ms. 4. Program. Programming the device in-system involves shifting in the address and data and then applying the programming pulse to program the EEPROM cells. This process is repeated for each EEPROM address. 5. Verify. Verifying an Altera device in-system involves shifting in addresses, applying the read pulse to verify the EEPROM cells, and shifting out the data for comparison. This process is repeated for each EEPROM address. 6. Exit ISP. An exit ISP stage ensures that the I/O pins transition smoothly from ISP mode to user mode. The exit ISP stage requires 1ms. Altera Corporation 17

MAX 7000 Programmable Logic Device Family Data Sheet Programming Times The time required to implement each of the six programming stages can be broken into the following two elements: ■ A pulse time to erase, program, or read the EEPROM cells. ■ A shifting time based on the test clock (TCK) frequency and the number of TCK cycles to shift instructions, address, and data into the device. By combining the pulse and shift times for each of the programming stages, the program or verify time can be derived as a function of the TCK frequency, the number of devices, and specific target device(s). Because different ISP-capable devices have a different number of EEPROM cells, both the total fixed and total variable times are unique for a single device. Programming a Single MAX 7000S Device The time required to program a single MAX 7000S device in-system can be calculated from the following formula: Cycle PTCK t = t +-------------------------------- PROG PPULSE f TCK where: t = Programming time PROG t = Sum of the fixed times to erase, program, and PPULSE verify the EEPROM cells Cycle = Number of TCK cycles to program a device PTCK f = TCK frequency TCK The ISP times for a stand-alone verification of a single MAX 7000S device can be calculated from the following formula: Cycle VTCK t = t +-------------------------------- VER VPULSE f TCK where: t = Verify time VER t = Sum of the fixed times to verify the EEPROM cells VPULSE Cycle = Number of TCK cycles to verify a device VTCK 18 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet The programming times described in Tables6 through 8 are associated with the worst-case method using the enhanced ISP algorithm. Table 6.MAX 7000S t & Cycle Values PULSE TCK Device Programming Stand-Alone Verification t (s) Cycle t (s) Cycle PPULSE PTCK VPULSE VTCK EPM7032S 4.02 342,000 0.03 200,000 EPM7064S 4.50 504,000 0.03 308,000 EPM7128S 5.11 832,000 0.03 528,000 EPM7160S 5.35 1,001,000 0.03 640,000 EPM7192S 5.71 1,192,000 0.03 764,000 EPM7256S 6.43 1,603,000 0.03 1,024,000 Tables7 and 8 show the in-system programming and stand alone verification times for several common test clock frequencies. Table 7.MAX 7000S In-System Programming Times for Different Test Clock Frequencies Device f Units TCK 10 MHz 5 MHz 2 MHz 1 MHz 500 kHz 200 kHz 100 kHz 50 kHz EPM7032S 4.06 4.09 4.19 4.36 4.71 5.73 7.44 10.86 s EPM7064S 4.55 4.60 4.76 5.01 5.51 7.02 9.54 14.58 s EPM7128S 5.19 5.27 5.52 5.94 6.77 9.27 13.43 21.75 s EPM7160S 5.45 5.55 5.85 6.35 7.35 10.35 15.36 25.37 s EPM7192S 5.83 5.95 6.30 6.90 8.09 11.67 17.63 29.55 s EPM7256S 6.59 6.75 7.23 8.03 9.64 14.45 22.46 38.49 s Table 8.MAX 7000S Stand-Alone Verification Times for Different Test Clock Frequencies Device f Units TCK 10 MHz 5 MHz 2 MHz 1 MHz 500 kHz 200 kHz 100 kHz 50 kHz EPM7032S 0.05 0.07 0.13 0.23 0.43 1.03 2.03 4.03 s EPM7064S 0.06 0.09 0.18 0.34 0.64 1.57 3.11 6.19 s EPM7128S 0.08 0.14 0.29 0.56 1.09 2.67 5.31 10.59 s EPM7160S 0.09 0.16 0.35 0.67 1.31 3.23 6.43 12.83 s EPM7192S 0.11 0.18 0.41 0.79 1.56 3.85 7.67 15.31 s EPM7256S 0.13 0.24 0.54 1.06 2.08 5.15 10.27 20.51 s Altera Corporation 19

MAX 7000 Programmable Logic Device Family Data Sheet Programmable MAX 7000 devices offer a power-saving mode that supports low-power operation across user-defined signal paths or the entire device. This Speed/Power feature allows total power dissipation to be reduced by 50% or more, Control because most logic applications require only a small fraction of all gates to operate at maximum frequency. The designer can program each individual macrocell in a MAX 7000 device for either high-speed (i.e., with the Turbo BitTM option turned on) or low-power (i.e., with the Turbo Bit option turned off) operation. As a result, speed-critical paths in the design can run at high speed, while the remaining paths can operate at reduced power. Macrocells that run at low power incur a nominal timing delay adder (t ) for the t , t , t , LPA LAD LAC IC t , and t , t , and t parameters. EN SEXP ACL CPPW Output MAX 7000 device outputs can be programmed to meet a variety of system-level requirements. Configuration MultiVolt I/O Interface MAX 7000 devices—except 44-pin devices—support the MultiVolt I/O interface feature, which allows MAX 7000 devices to interface with systems that have differing supply voltages. The 5.0-V devices in all packages can be set for 3.3-V or 5.0-V I/O pin operation. These devices have one set of VCC pins for internal operation and input buffers (VCCINT), and another set for I/O output drivers (VCCIO). The VCCINT pins must always be connected to a 5.0-V power supply. With a 5.0-V V level, input voltage thresholds are at TTL levels, and CCINT are therefore compatible with both 3.3-V and 5.0-V inputs. The VCCIO pins can be connected to either a 3.3-V or a 5.0-V power supply, depending on the output requirements. When the VCCIO pins are connected to a 5.0-V supply, the output levels are compatible with 5.0-V systems. When V is connected to a 3.3-V supply, the output high is CCIO 3.3V and is therefore compatible with 3.3-V or 5.0-V systems. Devices operating with V levels lower than 4.75 V incur a nominally greater CCIO timing delay of t instead of t . OD2 OD1 Open-Drain Output Option (MAX 7000S Devices Only) MAX 7000S devices provide an optional open-drain (functionally equivalent to open-collector) output for each I/O pin. This open-drain output enables the device to provide system-level control signals (e.g., interrupt and write enable signals) that can be asserted by any of several devices. It can also provide an additional wired-OR plane. 20 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet By using an external 5.0-V pull-up resistor, output pins on MAX 7000S devices can be set to meet 5.0-V CMOS input voltages. When V is 3.3V, setting the open drain option will turn off the output CCIO pull-up transistor, allowing the external pull-up resistor to pull the output high enough to meet 5.0-V CMOS input voltages. When V is 5.0V, setting the output drain option is not necessary CCIO because the pull-up transistor will already turn off when the pin exceeds approximately 3.8 V, allowing the external pull-up resistor to pull the output high enough to meet 5.0-V CMOS input voltages. Slew-Rate Control The output buffer for each MAX 7000E and MAX 7000S I/O pin has an adjustable output slew rate that can be configured for low-noise or high-speed performance. A faster slew rate provides high-speed transitions for high-performance systems. However, these fast transitions may introduce noise transients into the system. A slow slew rate reduces system noise, but adds a nominal delay of 4 to 5 ns. In MAX7000E devices, when the Turbo Bit is turned off, the slew rate is set for low noise performance. For MAX7000S devices, each I/O pin has an individual EEPROM bit that controls the slew rate, allowing designers to specify the slew rate on a pin-by-pin basis. Programming with MAX 7000 devices can be programmed on Windows-based PCs with the Altera Logic Programmer card, the Master Programming Unit External Hardware (MPU), and the appropriate device adapter. The MPU performs a continuity check to ensure adequate electrical contact between the adapter and the device. f For more information, see the Altera Programming Hardware Data Sheet. The Altera development system can use text- or waveform-format test vectors created with the Text Editor or Waveform Editor to test the programmed device. For added design verification, designers can perform functional testing to compare the functional behavior of a MAX7000 device with the results of simulation. Moreover, Data I/O, BP Microsystems, and other programming hardware manufacturers also provide programming support for Altera devices. f For more information, see the Programming Hardware Manufacturers. Altera Corporation 21

MAX 7000 Programmable Logic Device Family Data Sheet IEEE Std. MAX 7000 devices support JTAG BST circuitry as specified by IEEE Std. 1149.1-1990. Table9 describes the JTAG instructions supported by the 1149.1 (JTAG) MAX7000 family. The pin-out tables (see the Altera web site Boundary-Scan (http://www.altera.com) or the Altera Digital Library for pin-out information) show the location of the JTAG control pins for each device. Support If the JTAG interface is not required, the JTAG pins are available as user I/O pins. Table 9.MAX 7000 JTAG Instructions JTAG Instruction Devices Description SAMPLE/PRELOAD EPM7128S Allows a snapshot of signals at the device pins to be captured and EPM7160S examined during normal device operation, and permits an initial data EPM7192S pattern output at the device pins. EPM7256S EXTEST EPM7128S Allows the external circuitry and board-level interconnections to be EPM7160S tested by forcing a test pattern at the output pins and capturing test EPM7192S results at the input pins. EPM7256S BYPASS EPM7032S Places the 1-bit bypass register between the TDI and TDO pins, which EPM7064S allows the BST data to pass synchronously through a selected device EPM7128S to adjacent devices during normal device operation. EPM7160S EPM7192S EPM7256S IDCODE EPM7032S Selects the IDCODE register and places it between TDI and TDO, EPM7064S allowing the IDCODE to be serially shifted out of TDO. EPM7128S EPM7160S EPM7192S EPM7256S ISP Instructions EPM7032S These instructions are used when programming MAX7000S devices EPM7064S via the JTAG ports with the MasterBlaster, ByteBlasterMV, BitBlaster EPM7128S download cable, or using a Jam File (.jam), Jam Byte-Code file (.jbc), EPM7160S or Serial Vector Format file (.svf) via an embedded processor or test EPM7192S equipment. EPM7256S 22 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet The instruction register length of MAX 7000S devices is 10 bits. Tables10 and 11 show the boundary-scan register length and device IDCODE information for MAX 7000S devices. Table 10.MAX 7000S Boundary-Scan Register Length Device Boundary-Scan Register Length EPM7032S 1 (1) EPM7064S 1 (1) EPM7128S 288 EPM7160S 312 EPM7192S 360 EPM7256S 480 Note: (1) This device does not support JTAG boundary-scan testing. Selecting either the EXTEST or SAMPLE/PRELOAD instruction will select the one-bit bypass register. Table 11.32-Bit MAX 7000 Device IDCODE Note (1) Device IDCODE (32 Bits) Version Part Number (16 Bits) Manufacturer’s 1 (1 Bit) (4 Bits) Identity (11 Bits) (2) EPM7032S 0000 0111 0000 0011 0010 00001101110 1 EPM7064S 0000 0111 0000 0110 0100 00001101110 1 EPM7128S 0000 0111 0001 0010 1000 00001101110 1 EPM7160S 0000 0111 0001 0110 0000 00001101110 1 EPM7192S 0000 0111 0001 1001 0010 00001101110 1 EPM7256S 0000 0111 0010 0101 0110 00001101110 1 Notes: (1) The most significant bit (MSB) is on the left. (2) The least significant bit (LSB) for all JTAG IDCODEs is 1. Altera Corporation 23

MAX 7000 Programmable Logic Device Family Data Sheet Figure9 shows the timing requirements for the JTAG signals. Figure 9. MAX 7000 JTAG Waveforms TMS TDI tJCP tJCH tJCL tJPSU tJPH TCK tJPZX tJPCO tJPXZ TDO t t JSSU JSH Signal to Be Captured tJSZX tJSCO tJSXZ Signal to Be Driven Table12 shows the JTAG timing parameters and values for MAX7000S devices. Table 12.JTAG Timing Parameters & Values for MAX7000S Devices Symbol Parameter Min Max Unit t TCK clock period 100 ns JCP t TCK clock high time 50 ns JCH t TCK clock low time 50 ns JCL t JTAG port setup time 20 ns JPSU t JTAG port hold time 45 ns JPH t JTAG port clock to output 25 ns JPCO t JTAG port high impedance to valid output 25 ns JPZX t JTAG port valid output to high impedance 25 ns JPXZ t Capture register setup time 20 ns JSSU t Capture register hold time 45 ns JSH t Update register clock to output 25 ns JSCO t Update register high impedance to valid output 25 ns JSZX t Update register valid output to high impedance 25 ns JSXZ f For more information, see Application Note 39 (IEEE 1149.1 (JTAG) Boundary-Scan Testing in Altera Devices). 24 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Design Security All MAX 7000 devices contain a programmable security bit that controls access to the data programmed into the device. When this bit is programmed, a proprietary design implemented in the device cannot be copied or retrieved. This feature provides a high level of design security because programmed data within EEPROM cells is invisible. The security bit that controls this function, as well as all other programmed data, is reset only when the device is reprogrammed. Generic Testing Each MAX 7000 device is functionally tested. Complete testing of each programmable EEPROM bit and all internal logic elements ensures 100% programming yield. AC test measurements are taken under conditions equivalent to those shown in Figure10. Test patterns can be used and then erased during early stages of the production flow. Figure 10. MAX 7000 AC Test Conditions Power supply transients can affect AC measurements. Simultaneous transitions of multiple outputs should be VCC avoided for accurate measurement. Threshold tests must not be performed 464 Ω [703 Ω] under AC conditions. Large-amplitude, fast ground-current transients normally Device To Test Output System occur as the device outputs discharge the load capacitances. When these transients flow through the parasitic inductance between the device ground 250 Ω pin and the test system ground, [8.06 K Ω ] C1 (includes JIG capacitance) significant reductions in observable Device input noise immunity can result. Numbers in rise and fall brackets are for 2.5-V devices and times < 3 ns outputs. Numbers without brackets are for 3.3-V devices and outputs. QFP Carrier & MAX 7000 and MAX 7000E devices in QFP packages with 100 or more pins are shipped in special plastic carriers to protect the QFP leads. The Development carrier is used with a prototype development socket and special Socket programming hardware available from Altera. This carrier technology makes it possible to program, test, erase, and reprogram a device without exposing the leads to mechanical stress. f For detailed information and carrier dimensions, refer to the QFP Carrier & Development Socket Data Sheet. 1 MAX 7000S devices are not shipped in carriers. Altera Corporation 25

MAX 7000 Programmable Logic Device Family Data Sheet Operating Tables13 through 18 provide information about absolute maximum ratings, recommended operating conditions, operating conditions, and Conditions capacitance for 5.0-V MAX 7000 devices. Table 13.MAX 7000 5.0-V Device Absolute Maximum Ratings Note (1) Symbol Parameter Conditions Min Max Unit VCC Supply voltage With respect to ground (2) –2.0 7.0 V VI DC input voltage –2.0 7.0 V IOUT DC output current, per pin –25 25 mA TSTG Storage temperature No bias –65 150 ° C TAMB Ambient temperature Under bias –65 135 ° C TJ Junction temperature Ceramic packages, under bias 150 ° C PQFP and RQFP packages, under bias 135 ° C Table 14.MAX 7000 5.0-V Device Recommended Operating Conditions Symbol Parameter Conditions Min Max Unit VCCINT Supply voltage for internal logic and (3), (4), (5) 4.75 5.25 V input buffers (4.50) (5.50) VCCIO Supply voltage for output drivers, (3), (4) 4.75 5.25 V 5.0-V operation (4.50) (5.50) Supply voltage for output drivers, (3), (4), (6) 3.00 3.60 V 3.3-V operation (3.00) (3.60) VCCISP Supply voltage during ISP (7) 4.75 5.25 V VI Input voltage –0.5 (8) VCCINT + 0.5 V VO Output voltage 0 VCCIO V TA Ambient temperature For commercial use 0 70 ° C For industrial use –40 85 ° C TJ Junction temperature For commercial use 0 90 ° C For industrial use –40 105 ° C tR Input rise time 40 ns tF Input fall time 40 ns 26 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 15.MAX 7000 5.0-V Device DC Operating Conditions Note (9) Symbol Parameter Conditions Min Max Unit VIH High-level input voltage 2.0 VCCINT + 0.5 V VIL Low-level input voltage –0.5 (8) 0.8 V VOH 5.0-V high-level TTL output voltage IOH = –4 mA DC, VCCIO = 4.75 V (10) 2.4 V 3.3-V high-level TTL output voltage IOH = –4 mA DC, VCCIO = 3.00 V (10) 2.4 V 3.3-V high-level CMOS output IOH = –0.1 mA DC, VCCIO = 3.0 V (10) VCCIO – 0.2 V voltage VOL 5.0-V low-level TTL output voltage IOL = 12 mA DC, VCCIO = 4.75 V (11) 0.45 V 3.3-V low-level TTL output voltage IOL = 12 mA DC, VCCIO = 3.00 V (11) 0.45 V 3.3-V low-level CMOS output IOL = 0.1 mA DC, VCCIO = 3.0 V(11) 0.2 V voltage II Leakage current of dedicated input VI = –0.5 to 5.5 V (11) –10 10 μA pins IOZ I/O pin tri-state output off-state VI = –0.5 to 5.5 V (11), (12) –40 40 μA current Table 16.MAX 7000 5.0-V Device Capacitance: EPM7032, EPM7064 & EPM7096 Devices Note (13) Symbol Parameter Conditions Min Max Unit CIN Input pin capacitance VIN = 0 V, f = 1.0 MHz 12 pF CI/O I/O pin capacitance VOUT = 0 V, f = 1.0 MHz 12 pF Table 17.MAX 7000 5.0-V Device Capacitance: MAX 7000E Devices Note (13) Symbol Parameter Conditions Min Max Unit CIN Input pin capacitance VIN = 0 V, f = 1.0 MHz 15 pF CI/O I/O pin capacitance VOUT = 0 V, f = 1.0 MHz 15 pF Table 18.MAX 7000 5.0-V Device Capacitance: MAX 7000S Devices Note (13) Symbol Parameter Conditions Min Max Unit CIN Dedicated input pin capacitance VIN = 0 V, f = 1.0 MHz 10 pF CI/O I/O pin capacitance VOUT = 0 V, f = 1.0 MHz 10 pF Altera Corporation 27

MAX 7000 Programmable Logic Device Family Data Sheet Notes to tables: (1) See the Operating Requirements for Altera Devices Data Sheet. (2) Minimum DC input voltage on I/O pins is –0.5 V and on 4 dedicated input pins is –0.3 V. During transitions, the inputs may undershoot to –2.0 V or overshoot to 7.0 V for input currents less than 100 mA and periods shorter than 20 ns. (3) Numbers in parentheses are for industrial-temperature-range devices. (4) VCC must rise monotonically. (5) The POR time for all 7000S devices does not exceed 300 μs. The sufficient VCCINT voltage level for POR is 4.5 V. The device is fully initialized within the POR time after VCCINT reaches the sufficient POR voltage level. (6) 3.3-V I/O operation is not available for 44-pin packages. (7) The VCCISP parameter applies only to MAX 7000S devices. (8) During in-system programming, the minimum DC input voltage is –0.3 V. (9) These values are specified under the MAX 7000 recommended operating conditions in Table14 on page26. (10) The parameter is measured with 50% of the outputs each sourcing the specified current. The IOH parameter refers to high-level TTL or CMOS output current. (11) The parameter is measured with 50% of the outputs each sinking the specified current. The IOL parameter refers to low-level TTL, PCI, or CMOS output current. (12) When the JTAG interface is enabled in MAX 7000S devices, the input leakage current on the JTAG pins is typically –60μA. (13) Capacitance is measured at 25° C and is sample-tested only. The OE1 pin has a maximum capacitance of 20 pF. Figure11 shows the typical output drive characteristics of MAX 7000 devices. Figure 11. Output Drive Characteristics of 5.0-V MAX 7000 Devices 150 I 150 I OL OL 120 120 Typical IO 90 Typical IO 90 OCuurtrpeuntt (mA) VRCoCoImO =T e5m.0p Verature OCuurtrpeuntt (mA) VRCoCoImO =T e3m.3p Verature 60 60 I I OH OH 30 30 1 2 3 4 5 1 2 3 3.3 4 5 V Output Voltage (V) V Output Voltage (V) O O Timing Model MAX 7000 device timing can be analyzed with the Altera software, with a variety of popular industry-standard EDA simulators and timing analyzers, or with the timing model shown in Figure12. MAX7000 devices have fixed internal delays that enable the designer to determine the worst-case timing of any design. The Altera software provides timing simulation, point-to-point delay prediction, and detailed timing analysis for a device-wide performance evaluation. 28 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure 12. MAX 7000 Timing Model Internal Output Enable Delay tIOE(1) Input Global Control Delay Delay tIN tGLOB Parallel RDegeilsatyer ODuetlpauyt DtPePIlIAaAy CLooRngDtettttrigoLIEceLCAAN illAs aCDDtryerearlayy ExpantPdEeXrP Delay ttttttttSHPCRCFFSHURLDORUEMB tttttttOOOXZZZZXXXDDD123321(((212))) I/O Shared Delay Fast Expander Delay Input Delay tIO tSEXP tFIN(1) Notes: (1) Only available in MAX 7000E and MAX 7000S devices. (2) Not available in 44-pin devices. The timing characteristics of any signal path can be derived from the timing model and parameters of a particular device. External timing parameters, which represent pin-to-pin timing delays, can be calculated as the sum of internal parameters. Figure13 shows the internal timing relationship of internal and external delay parameters. f For more infomration, see Application Note 94 (Understanding MAX 7000 Timing). Altera Corporation 29

MAX 7000 Programmable Logic Device Family Data Sheet Figure 13. Switching Waveforms t & t < 3 ns. Combinatorial Mode R F Inputs are driven at 3 V for a logic high and 0 V tIN for a logic low. All timing Input Pin characteristics are tIO measured at 1.5 V. I/O Pin tPIA PIA Delay tSEXP Shared Expander Delay tLAC , tLAD Logic Array Input tPEXP Parallel Expander Delay tCOMB Logic Array Output tOD Output Pin Global Clock Mode Global tR tCH tCL tF Clock Pin tIN Global Clock tGLOB at Register tSU tH Data or Enable (Logic Array Output) Array Clock Mode tR tACH tACL tF Input or I/O Pin tIN tIO Clock into PIA Clock into tPIA Logic Array Clock at tIC Register tSU tH Data from Logic Array tRD tPIA tCLR , tPRE tPIA Register to PIA to Logic Array tOD tOD Register Output to Pin 30 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Tables19 through 26 show the MAX 7000 and MAX 7000E AC operating conditions. Table 19.MAX 7000 & MAX 7000E External Timing Parameters Note (1) Symbol Parameter Conditions -6 Speed Grade -7 Speed Grade Unit Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 6.0 7.5 ns tPD2 I/O input to non-registered output C1 = 35 pF 6.0 7.5 ns tSU Global clock setup time 5.0 6.0 ns tH Global clock hold time 0.0 0.0 ns tFSU Global clock setup time of fast input (2) 2.5 3.0 ns tFH Global clock hold time of fast input (2) 0.5 0.5 ns tCO1 Global clock to output delay C1 = 35 pF 4.0 4.5 ns tCH Global clock high time 2.5 3.0 ns tCL Global clock low time 2.5 3.0 ns tASU Array clock setup time 2.5 3.0 ns tAH Array clock hold time 2.0 2.0 ns tACO1 Array clock to output delay C1 = 35 pF 6.5 7.5 ns tACH Array clock high time 3.0 3.0 ns tACL Array clock low time 3.0 3.0 ns tCPPW Minimum pulse width for clear and (3) 3.0 3.0 ns preset tODH Output data hold time after clock C1 = 35 pF (4) 1.0 1.0 ns tCNT Minimum global clock period 6.6 8.0 ns fCNT Maximum internal global clock (5) 151.5 125.0 MHz frequency tACNT Minimum array clock period 6.6 8.0 ns fACNT Maximum internal array clock (5) 151.5 125.0 MHz frequency fMAX Maximum clock frequency (6) 200 166.7 MHz Altera Corporation 31

MAX 7000 Programmable Logic Device Family Data Sheet Table 20.MAX 7000 & MAX 7000E Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade -6 Speed Grade -7 Unit Min Max Min Max tIN Input pad and buffer delay 0.4 0.5 ns tIO I/O input pad and buffer delay 0.4 0.5 ns tFIN Fast input delay (2) 0.8 1.0 ns tSEXP Shared expander delay 3.5 4.0 ns tPEXP Parallel expander delay 0.8 0.8 ns tLAD Logic array delay 2.0 3.0 ns tLAC Logic control array delay 2.0 3.0 ns tIOE Internal output enable delay (2) 2.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 2.0 2.0 ns Slow slew rate = off, VCCIO = 5.0 V tOD2 Output buffer and pad delay C1 = 35 pF (7) 2.5 2.5 ns Slow slew rate = off, VCCIO = 3.3 V tOD3 Output buffer and pad delay C1 = 35 pF (2) 7.0 7.0 ns Slow slew rate = on, VCCIO = 5.0 V or 3.3 V tZX1 Output buffer enable delay C1 = 35 pF 4.0 4.0 ns Slow slew rate = off, VCCIO = 5.0 V tZX2 Output buffer enable delay C1 = 35 pF (7) 4.5 4.5 ns Slow slew rate = off, VCCIO = 3.3 V tZX3 Output buffer enable delay C1 = 35 pF (2) 9.0 9.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tXZ Output buffer disable delay C1 = 5 pF 4.0 4.0 ns tSU Register setup time 3.0 3.0 ns tH Register hold time 1.5 2.0 ns tFSU Register setup time of fast input (2) 2.5 3.0 ns tFH Register hold time of fast input (2) 0.5 0.5 ns tRD Register delay 0.8 1.0 ns tCOMB Combinatorial delay 0.8 1.0 ns tIC Array clock delay 2.5 3.0 ns tEN Register enable time 2.0 3.0 ns tGLOB Global control delay 0.8 1.0 ns tPRE Register preset time 2.0 2.0 ns tCLR Register clear time 2.0 2.0 ns tPIA PIA delay 0.8 1.0 ns tLPA Low-power adder (8) 10.0 10.0 ns 32 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 21.MAX 7000 & MAX 7000E External Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit MAX 7000E (-10P) MAX 7000 (-10) MAX 7000E (-10) Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 10.0 10.0 ns tPD2 I/O input to non-registered output C1 = 35 pF 10.0 10.0 ns tSU Global clock setup time 7.0 8.0 ns tH Global clock hold time 0.0 0.0 ns tFSU Global clock setup time of fast input (2) 3.0 3.0 ns tFH Global clock hold time of fast input (2) 0.5 0.5 ns tCO1 Global clock to output delay C1 = 35 pF 5.0 5 ns tCH Global clock high time 4.0 4.0 ns tCL Global clock low time 4.0 4.0 ns tASU Array clock setup time 2.0 3.0 ns tAH Array clock hold time 3.0 3.0 ns tACO1 Array clock to output delay C1 = 35 pF 10.0 10.0 ns tACH Array clock high time 4.0 4.0 ns tACL Array clock low time 4.0 4.0 ns tCPPW Minimum pulse width for clear and (3) 4.0 4.0 ns preset tODH Output data hold time after clock C1 = 35 pF (4) 1.0 1.0 ns tCNT Minimum global clock period 10.0 10.0 ns fCNT Maximum internal global clock (5) 100.0 100.0 MHz frequency tACNT Minimum array clock period 10.0 10.0 ns fACNT Maximum internal array clock (5) 100.0 100.0 MHz frequency fMAX Maximum clock frequency (6) 125.0 125.0 MHz Altera Corporation 33

MAX 7000 Programmable Logic Device Family Data Sheet Table 22.MAX 7000 & MAX 7000E Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit MAX 7000E (-10P) MAX 7000 (-10) MAX 7000E (-10) Min Max Min Max tIN Input pad and buffer delay 0.5 1.0 ns tIO I/O input pad and buffer delay 0.5 1.0 ns tFIN Fast input delay (2) 1.0 1.0 ns tSEXP Shared expander delay 5.0 5.0 ns tPEXP Parallel expander delay 0.8 0.8 ns tLAD Logic array delay 5.0 5.0 ns tLAC Logic control array delay 5.0 5.0 ns tIOE Internal output enable delay (2) 2.0 2.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 1.5 2.0 ns Slow slew rate = off VCCIO = 5.0 V tOD2 Output buffer and pad delay C1 = 35 pF (7) 2.0 2.5 ns Slow slew rate = off VCCIO = 3.3 V tOD3 Output buffer and pad delay C1 = 35 pF (2) 5.5 6.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tZX1 Output buffer enable delay C1 = 35 pF 5.0 5.0 ns Slow slew rate = off VCCIO = 5.0 V tZX2 Output buffer enable delay C1 = 35 pF (7) 5.5 5.5 ns Slow slew rate = off VCCIO = 3.3 V tZX3 Output buffer enable delay C1 = 35 pF (2) 9.0 9.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tXZ Output buffer disable delay C1 = 5 pF 5.0 5.0 ns tSU Register setup time 2.0 3.0 ns tH Register hold time 3.0 3.0 ns tFSU Register setup time of fast input (2) 3.0 3.0 ns tFH Register hold time of fast input (2) 0.5 0.5 ns tRD Register delay 2.0 1.0 ns tCOMB Combinatorial delay 2.0 1.0 ns tIC Array clock delay 5.0 5.0 ns tEN Register enable time 5.0 5.0 ns tGLOB Global control delay 1.0 1.0 ns tPRE Register preset time 3.0 3.0 ns tCLR Register clear time 3.0 3.0 ns tPIA PIA delay 1.0 1.0 ns tLPA Low-power adder (8) 11.0 11.0 ns 34 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 23.MAX 7000 & MAX 7000E External Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit MAX 7000E (-12P) MAX 7000 (-12) MAX 7000E (-12) Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 12.0 12.0 ns tPD2 I/O input to non-registered output C1 = 35 pF 12.0 12.0 ns tSU Global clock setup time 7.0 10.0 ns tH Global clock hold time 0.0 0.0 ns tFSU Global clock setup time of fast input (2) 3.0 3.0 ns tFH Global clock hold time of fast input (2) 0.0 0.0 ns tCO1 Global clock to output delay C1 = 35 pF 6.0 6.0 ns tCH Global clock high time 4.0 4.0 ns tCL Global clock low time 4.0 4.0 ns tASU Array clock setup time 3.0 4.0 ns tAH Array clock hold time 4.0 4.0 ns tACO1 Array clock to output delay C1 = 35 pF 12.0 12.0 ns tACH Array clock high time 5.0 5.0 ns tACL Array clock low time 5.0 5.0 ns tCPPW Minimum pulse width for clear and (3) 5.0 5.0 ns preset tODH Output data hold time after clock C1 = 35 pF (4) 1.0 1.0 ns tCNT Minimum global clock period 11.0 11.0 ns fCNT Maximum internal global clock (5) 90.9 90.9 MHz frequency tACNT Minimum array clock period 11.0 11.0 ns fACNT Maximum internal array clock (5) 90.9 90.9 MHz frequency fMAX Maximum clock frequency (6) 125.0 125.0 MHz Altera Corporation 35

MAX 7000 Programmable Logic Device Family Data Sheet Table 24.MAX 7000 & MAX 7000E Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit MAX 7000E (-12P) MAX 7000 (-12) MAX 7000E (-12) Min Max Min Max tIN Input pad and buffer delay 1.0 2.0 ns tIO I/O input pad and buffer delay 1.0 2.0 ns tFIN Fast input delay (2) 1.0 1.0 ns tSEXP Shared expander delay 7.0 7.0 ns tPEXP Parallel expander delay 1.0 1.0 ns tLAD Logic array delay 7.0 5.0 ns tLAC Logic control array delay 5.0 5.0 ns tIOE Internal output enable delay (2) 2.0 2.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 1.0 3.0 ns Slow slew rate = off VCCIO = 5.0 V tOD2 Output buffer and pad delay C1 = 35 pF (7) 2.0 4.0 ns Slow slew rate = off VCCIO = 3.3 V tOD3 Output buffer and pad delay C1 = 35 pF (2) 5.0 7.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tZX1 Output buffer enable delay C1 = 35 pF 6.0 6.0 ns Slow slew rate = off VCCIO = 5.0 V tZX2 Output buffer enable delay C1 = 35 pF (7) 7.0 7.0 ns Slow slew rate = off VCCIO = 3.3 V tZX3 Output buffer enable delay C1 = 35 pF (2) 10.0 10.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tXZ Output buffer disable delay C1 = 5 pF 6.0 6.0 ns tSU Register setup time 1.0 4.0 ns tH Register hold time 6.0 4.0 ns tFSU Register setup time of fast input (2) 4.0 2.0 ns tFH Register hold time of fast input (2) 0.0 2.0 ns tRD Register delay 2.0 1.0 ns tCOMB Combinatorial delay 2.0 1.0 ns tIC Array clock delay 5.0 5.0 ns tEN Register enable time 7.0 5.0 ns tGLOB Global control delay 2.0 0.0 ns tPRE Register preset time 4.0 3.0 ns tCLR Register clear time 4.0 3.0 ns tPIA PIA delay 1.0 1.0 ns tLPA Low-power adder (8) 12.0 12.0 ns 36 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 25.MAX 7000 & MAX 7000E External Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -15 -15T -20 Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 15.0 15.0 20.0 ns tPD2 I/O input to non-registered C1 = 35 pF 15.0 15.0 20.0 ns output tSU Global clock setup time 11.0 11.0 12.0 ns tH Global clock hold time 0.0 0.0 0.0 ns tFSU Global clock setup time of fast (2) 3.0 – 5.0 ns input tFH Global clock hold time of fast (2) 0.0 – 0.0 ns input tCO1 Global clock to output delay C1 = 35 pF 8.0 8.0 12.0 ns tCH Global clock high time 5.0 6.0 6.0 ns tCL Global clock low time 5.0 6.0 6.0 ns tASU Array clock setup time 4.0 4.0 5.0 ns tAH Array clock hold time 4.0 4.0 5.0 ns tACO1 Array clock to output delay C1 = 35 pF 15.0 15.0 20.0 ns tACH Array clock high time 6.0 6.5 8.0 ns tACL Array clock low time 6.0 6.5 8.0 ns tCPPW Minimum pulse width for clear (3) 6.0 6.5 8.0 ns and preset tODH Output data hold time after C1 = 35 pF (4) 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 13.0 13.0 16.0 ns fCNT Maximum internal global clock (5) 76.9 76.9 62.5 MHz frequency tACNT Minimum array clock period 13.0 13.0 16.0 ns fACNT Maximum internal array clock (5) 76.9 76.9 62.5 MHz frequency fMAX Maximum clock frequency (6) 100 83.3 83.3 MHz Altera Corporation 37

MAX 7000 Programmable Logic Device Family Data Sheet Table 26.MAX 7000 & MAX 7000E Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -15 -15T -20 Min Max Min Max Min Max tIN Input pad and buffer delay 2.0 2.0 3.0 ns tIO I/O input pad and buffer delay 2.0 2.0 3.0 ns tFIN Fast input delay (2) 2.0 – 4.0 ns tSEXP Shared expander delay 8.0 10.0 9.0 ns tPEXP Parallel expander delay 1.0 1.0 2.0 ns tLAD Logic array delay 6.0 6.0 8.0 ns tLAC Logic control array delay 6.0 6.0 8.0 ns tIOE Internal output enable delay (2) 3.0 – 4.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 4.0 4.0 5.0 ns Slow slew rate = off VCCIO = 5.0 V tOD2 Output buffer and pad delay C1 = 35 pF (7) 5.0 – 6.0 ns Slow slew rate = off VCCIO = 3.3 V tOD3 Output buffer and pad delay C1 = 35 pF (2) 8.0 – 9.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tZX1 Output buffer enable delay C1 = 35 pF 6.0 6.0 10.0 ns Slow slew rate = off VCCIO = 5.0 V tZX2 Output buffer enable delay C1 = 35 pF (7) 7.0 – 11.0 ns Slow slew rate = off VCCIO = 3.3 V tZX3 Output buffer enable delay C1 = 35 pF (2) 10.0 – 14.0 ns Slow slew rate = on VCCIO = 5.0 V or 3.3 V tXZ Output buffer disable delay C1 = 5 pF 6.0 6.0 10.0 ns tSU Register setup time 4.0 4.0 4.0 ns tH Register hold time 4.0 4.0 5.0 ns tFSU Register setup time of fast input (2) 2.0 – 4.0 ns tFH Register hold time of fast input (2) 2.0 – 3.0 ns tRD Register delay 1.0 1.0 1.0 ns tCOMB Combinatorial delay 1.0 1.0 1.0 ns tIC Array clock delay 6.0 6.0 8.0 ns tEN Register enable time 6.0 6.0 8.0 ns tGLOB Global control delay 1.0 1.0 3.0 ns tPRE Register preset time 4.0 4.0 4.0 ns tCLR Register clear time 4.0 4.0 4.0 ns tPIA PIA delay 2.0 2.0 3.0 ns tLPA Low-power adder (8) 13.0 15.0 15.0 ns 38 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This parameter applies to MAX 7000E devices only. (3) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (4) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (5) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (6) The fMAX values represent the highest frequency for pipelined data. (7) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Tables27 and 28 show the EPM7032S AC operating conditions. Table 27.EPM7032S External Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 5.0 6.0 7.5 10.0 ns tPD2 I/O input to non-registered C1 = 35 pF 5.0 6.0 7.5 10.0 ns output tSU Global clock setup time 2.9 4.0 5.0 7.0 ns tH Global clock hold time 0.0 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 2.5 2.5 2.5 3.0 ns input tFH Global clock hold time of fast 0.0 0.0 0.0 0.5 ns input tCO1 Global clock to output delay C1 = 35 pF 3.2 3.5 4.3 5.0 ns tCH Global clock high time 2.0 2.5 3.0 4.0 ns tCL Global clock low time 2.0 2.5 3.0 4.0 ns tASU Array clock setup time 0.7 0.9 1.1 2.0 ns tAH Array clock hold time 1.8 2.1 2.7 3.0 ns tACO1 Array clock to output delay C1 = 35 pF 5.4 6.6 8.2 10.0 ns tACH Array clock high time 2.5 2.5 3.0 4.0 ns tACL Array clock low time 2.5 2.5 3.0 4.0 ns tCPPW Minimum pulse width for clear (2) 2.5 2.5 3.0 4.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 5.7 7.0 8.6 10.0 ns fCNT Maximum internal global clock (4) 175.4 142.9 116.3 100.0 MHz frequency tACNT Minimum array clock period 5.7 7.0 8.6 10.0 ns Altera Corporation 39

MAX 7000 Programmable Logic Device Family Data Sheet Table 27.EPM7032S External Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max fACNT Maximum internal array clock (4) 175.4 142.9 116.3 100.0 MHz frequency fMAX Maximum clock frequency (5) 250.0 200.0 166.7 125.0 MHz Table 28.EPM7032S Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tIN Input pad and buffer delay 0.2 0.2 0.3 0.5 ns tIO I/O input pad and buffer delay 0.2 0.2 0.3 0.5 ns tFIN Fast input delay 2.2 2.1 2.5 1.0 ns tSEXP Shared expander delay 3.1 3.8 4.6 5.0 ns tPEXP Parallel expander delay 0.9 1.1 1.4 0.8 ns tLAD Logic array delay 2.6 3.3 4.0 5.0 ns tLAC Logic control array delay 2.5 3.3 4.0 5.0 ns tIOE Internal output enable delay 0.7 0.8 1.0 2.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.2 0.3 0.4 1.5 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 0.7 0.8 0.9 2.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.2 5.3 5.4 5.5 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 4.0 4.0 5.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 4.5 4.5 5.5 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 9.0 9.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 4.0 4.0 5.0 ns tSU Register setup time 0.8 1.0 1.3 2.0 ns tH Register hold time 1.7 2.0 2.5 3.0 ns tFSU Register setup time of fast 1.9 1.8 1.7 3.0 ns input tFH Register hold time of fast 0.6 0.7 0.8 0.5 ns input tRD Register delay 1.2 1.6 1.9 2.0 ns tCOMB Combinatorial delay 0.9 1.1 1.4 2.0 ns tIC Array clock delay 2.7 3.4 4.2 5.0 ns tEN Register enable time 2.6 3.3 4.0 5.0 ns tGLOB Global control delay 1.6 1.4 1.7 1.0 ns tPRE Register preset time 2.0 2.4 3.0 3.0 ns tCLR Register clear time 2.0 2.4 3.0 3.0 ns 40 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 28.EPM7032S Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tPIA PIA delay (7) 1.1 1.1 1.4 1.0 ns tLPA Low-power adder (8) 12.0 10.0 10.0 11.0 ns Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Tables29 and 30 show the EPM7064S AC operating conditions. Table 29.EPM7064S External Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 5.0 6.0 7.5 10.0 ns tPD2 I/O input to non-registered C1 = 35 pF 5.0 6.0 7.5 10.0 ns output tSU Global clock setup time 2.9 3.6 6.0 7.0 ns tH Global clock hold time 0.0 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 2.5 2.5 3.0 3.0 ns input tFH Global clock hold time of fast 0.0 0.0 0.5 0.5 ns input tCO1 Global clock to output delay C1 = 35 pF 3.2 4.0 4.5 5.0 ns tCH Global clock high time 2.0 2.5 3.0 4.0 ns tCL Global clock low time 2.0 2.5 3.0 4.0 ns tASU Array clock setup time 0.7 0.9 3.0 2.0 ns tAH Array clock hold time 1.8 2.1 2.0 3.0 ns Altera Corporation 41

MAX 7000 Programmable Logic Device Family Data Sheet Table 29.EPM7064S External Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tACO1 Array clock to output delay C1 = 35 pF 5.4 6.7 7.5 10.0 ns tACH Array clock high time 2.5 2.5 3.0 4.0 ns tACL Array clock low time 2.5 2.5 3.0 4.0 ns tCPPW Minimum pulse width for clear (2) 2.5 2.5 3.0 4.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 5.7 7.1 8.0 10.0 ns fCNT Maximum internal global clock (4) 175.4 140.8 125.0 100.0 MHz frequency tACNT Minimum array clock period 5.7 7.1 8.0 10.0 ns fACNT Maximum internal array clock (4) 175.4 140.8 125.0 100.0 MHz frequency fMAX Maximum clock frequency (5) 250.0 200.0 166.7 125.0 MHz Table 30.EPM7064S Internal Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tIN Input pad and buffer delay 0.2 0.2 0.5 0.5 ns tIO I/O input pad and buffer delay 0.2 0.2 0.5 0.5 ns tFIN Fast input delay 2.2 2.6 1.0 1.0 ns tSEXP Shared expander delay 3.1 3.8 4.0 5.0 ns tPEXP Parallel expander delay 0.9 1.1 0.8 0.8 ns tLAD Logic array delay 2.6 3.2 3.0 5.0 ns tLAC Logic control array delay 2.5 3.2 3.0 5.0 ns tIOE Internal output enable delay 0.7 0.8 2.0 2.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.2 0.3 2.0 1.5 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 0.7 0.8 2.5 2.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.2 5.3 7.0 5.5 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 4.0 4.0 5.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 4.5 4.5 5.5 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 9.0 9.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 4.0 4.0 5.0 ns tSU Register setup time 0.8 1.0 3.0 2.0 ns tH Register hold time 1.7 2.0 2.0 3.0 ns 42 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 30.EPM7064S Internal Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -5 -6 -7 -10 Min Max Min Max Min Max Min Max tFSU Register setup time of fast 1.9 1.8 3.0 3.0 ns input tFH Register hold time of fast 0.6 0.7 0.5 0.5 ns input tRD Register delay 1.2 1.6 1.0 2.0 ns tCOMB Combinatorial delay 0.9 1.0 1.0 2.0 ns tIC Array clock delay 2.7 3.3 3.0 5.0 ns tEN Register enable time 2.6 3.2 3.0 5.0 ns tGLOB Global control delay 1.6 1.9 1.0 1.0 ns tPRE Register preset time 2.0 2.4 2.0 3.0 ns tCLR Register clear time 2.0 2.4 2.0 3.0 ns tPIA PIA delay (7) 1.1 1.3 1.0 1.0 ns tLPA Low-power adder (8) 12.0 11.0 10.0 11.0 ns Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Altera Corporation 43

MAX 7000 Programmable Logic Device Family Data Sheet Tables31 and 32 show the EPM7128S AC operating conditions. Table 31.EPM7128S External Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 6.0 7.5 10.0 15.0 ns tPD2 I/O input to non-registered C1 = 35 pF 6.0 7.5 10.0 15.0 ns output tSU Global clock setup time 3.4 6.0 7.0 11.0 ns tH Global clock hold time 0.0 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 2.5 3.0 3.0 3.0 ns input tFH Global clock hold time of fast 0.0 0.5 0.5 0.0 ns input tCO1 Global clock to output delay C1 = 35 pF 4.0 4.5 5.0 8.0 ns tCH Global clock high time 3.0 3.0 4.0 5.0 ns tCL Global clock low time 3.0 3.0 4.0 5.0 ns tASU Array clock setup time 0.9 3.0 2.0 4.0 ns tAH Array clock hold time 1.8 2.0 5.0 4.0 ns tACO1 Array clock to output delay C1 = 35 pF 6.5 7.5 10.0 15.0 ns tACH Array clock high time 3.0 3.0 4.0 6.0 ns tACL Array clock low time 3.0 3.0 4.0 6.0 ns tCPPW Minimum pulse width for clear (2) 3.0 3.0 4.0 6.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 6.8 8.0 10.0 13.0 ns fCNT Maximum internal global clock (4) 147.1 125.0 100.0 76.9 MHz frequency tACNT Minimum array clock period 6.8 8.0 10.0 13.0 ns fACNT Maximum internal array clock (4) 147.1 125.0 100.0 76.9 MHz frequency fMAX Maximum clock frequency (5) 166.7 166.7 125.0 100.0 MHz 44 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 32.EPM7128S Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tIN Input pad and buffer delay 0.2 0.5 0.5 2.0 ns tIO I/O input pad and buffer delay 0.2 0.5 0.5 2.0 ns tFIN Fast input delay 2.6 1.0 1.0 2.0 ns tSEXP Shared expander delay 3.7 4.0 5.0 8.0 ns tPEXP Parallel expander delay 1.1 0.8 0.8 1.0 ns tLAD Logic array delay 3.0 3.0 5.0 6.0 ns tLAC Logic control array delay 3.0 3.0 5.0 6.0 ns tIOE Internal output enable delay 0.7 2.0 2.0 3.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.4 2.0 1.5 4.0 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 0.9 2.5 2.0 5.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.4 7.0 5.5 8.0 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 4.0 5.0 6.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 4.5 5.5 7.0 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 9.0 10.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 4.0 5.0 6.0 ns tSU Register setup time 1.0 3.0 2.0 4.0 ns tH Register hold time 1.7 2.0 5.0 4.0 ns tFSU Register setup time of fast 1.9 3.0 3.0 2.0 ns input tFH Register hold time of fast 0.6 0.5 0.5 1.0 ns input tRD Register delay 1.4 1.0 2.0 1.0 ns tCOMB Combinatorial delay 1.0 1.0 2.0 1.0 ns tIC Array clock delay 3.1 3.0 5.0 6.0 ns tEN Register enable time 3.0 3.0 5.0 6.0 ns tGLOB Global control delay 2.0 1.0 1.0 1.0 ns tPRE Register preset time 2.4 2.0 3.0 4.0 ns tCLR Register clear time 2.4 2.0 3.0 4.0 ns tPIA PIA delay (7) 1.4 1.0 1.0 2.0 ns tLPA Low-power adder (8) 11.0 10.0 11.0 13.0 ns Altera Corporation 45

MAX 7000 Programmable Logic Device Family Data Sheet Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Tables33 and 34 show the EPM7160S AC operating conditions. Table 33.EPM7160S External Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 6.0 7.5 10.0 15.0 ns tPD2 I/O input to non-registered C1 = 35 pF 6.0 7.5 10.0 15.0 ns output tSU Global clock setup time 3.4 4.2 7.0 11.0 ns tH Global clock hold time 0.0 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 2.5 3.0 3.0 3.0 ns input tFH Global clock hold time of fast 0.0 0.0 0.5 0.0 ns input tCO1 Global clock to output delay C1 = 35 pF 3.9 4.8 5 8 ns tCH Global clock high time 3.0 3.0 4.0 5.0 ns tCL Global clock low time 3.0 3.0 4.0 5.0 ns tASU Array clock setup time 0.9 1.1 2.0 4.0 ns tAH Array clock hold time 1.7 2.1 3.0 4.0 ns tACO1 Array clock to output delay C1 = 35 pF 6.4 7.9 10.0 15.0 ns tACH Array clock high time 3.0 3.0 4.0 6.0 ns tACL Array clock low time 3.0 3.0 4.0 6.0 ns tCPPW Minimum pulse width for clear (2) 2.5 3.0 4.0 6.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 6.7 8.2 10.0 13.0 ns fCNT Maximum internal global clock (4) 149.3 122.0 100.0 76.9 MHz frequency 46 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 33.EPM7160S External Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tACNT Minimum array clock period 6.7 8.2 10.0 13.0 ns fACNT Maximum internal array clock (4) 149.3 122.0 100.0 76.9 MHz frequency fMAX Maximum clock frequency (5) 166.7 166.7 125.0 100.0 MHz Table 34.EPM7160S Internal Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tIN Input pad and buffer delay 0.2 0.3 0.5 2.0 ns tIO I/O input pad and buffer delay 0.2 0.3 0.5 2.0 ns tFIN Fast input delay 2.6 3.2 1.0 2.0 ns tSEXP Shared expander delay 3.6 4.3 5.0 8.0 ns tPEXP Parallel expander delay 1.0 1.3 0.8 1.0 ns tLAD Logic array delay 2.8 3.4 5.0 6.0 ns tLAC Logic control array delay 2.8 3.4 5.0 6.0 ns tIOE Internal output enable delay 0.7 0.9 2.0 3.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.4 0.5 1.5 4.0 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 0.9 1.0 2.0 5.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.4 5.5 5.5 8.0 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 4.0 5.0 6.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 4.5 5.5 7.0 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 9.0 10.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 4.0 5.0 6.0 ns tSU Register setup time 1.0 1.2 2.0 4.0 ns tH Register hold time 1.6 2.0 3.0 4.0 ns tFSU Register setup time of fast 1.9 2.2 3.0 2.0 ns input tFH Register hold time of fast 0.6 0.8 0.5 1.0 ns input tRD Register delay 1.3 1.6 2.0 1.0 ns tCOMB Combinatorial delay 1.0 1.3 2.0 1.0 ns tIC Array clock delay 2.9 3.5 5.0 6.0 ns tEN Register enable time 2.8 3.4 5.0 6.0 ns tGLOB Global control delay 2.0 2.4 1.0 1.0 ns tPRE Register preset time 2.4 3.0 3.0 4.0 ns Altera Corporation 47

MAX 7000 Programmable Logic Device Family Data Sheet Table 34.EPM7160S Internal Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -6 -7 -10 -15 Min Max Min Max Min Max Min Max tCLR Register clear time 2.4 3.0 3.0 4.0 ns tPIA PIA delay (7) 1.6 2.0 1.0 2.0 ns tLPA Low-power adder (8) 11.0 10.0 11.0 13.0 ns Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Tables35 and 36 show the EPM7192S AC operating conditions. Table 35.EPM7192S External Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 7.5 10.0 15.0 ns tPD2 I/O input to non-registered C1 = 35 pF 7.5 10.0 15.0 ns output tSU Global clock setup time 4.1 7.0 11.0 ns tH Global clock hold time 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 3.0 3.0 3.0 ns input tFH Global clock hold time of fast 0.0 0.5 0.0 ns input tCO1 Global clock to output delay C1 = 35 pF 4.7 5.0 8.0 ns tCH Global clock high time 3.0 4.0 5.0 ns tCL Global clock low time 3.0 4.0 5.0 ns tASU Array clock setup time 1.0 2.0 4.0 ns 48 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Table 35.EPM7192S External Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tAH Array clock hold time 1.8 3.0 4.0 ns tACO1 Array clock to output delay C1 = 35 pF 7.8 10.0 15.0 ns tACH Array clock high time 3.0 4.0 6.0 ns tACL Array clock low time 3.0 4.0 6.0 ns tCPPW Minimum pulse width for clear (2) 3.0 4.0 6.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 8.0 10.0 13.0 ns fCNT Maximum internal global clock (4) 125.0 100.0 76.9 MHz frequency tACNT Minimum array clock period 8.0 10.0 13.0 ns fACNT Maximum internal array clock (4) 125.0 100.0 76.9 MHz frequency fMAX Maximum clock frequency (5) 166.7 125.0 100.0 MHz Table 36.EPM7192S Internal Timing Parameters (Part 1 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tIN Input pad and buffer delay 0.3 0.5 2.0 ns tIO I/O input pad and buffer delay 0.3 0.5 2.0 ns tFIN Fast input delay 3.2 1.0 2.0 ns tSEXP Shared expander delay 4.2 5.0 8.0 ns tPEXP Parallel expander delay 1.2 0.8 1.0 ns tLAD Logic array delay 3.1 5.0 6.0 ns tLAC Logic control array delay 3.1 5.0 6.0 ns tIOE Internal output enable delay 0.9 2.0 3.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.5 1.5 4.0 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 1.0 2.0 5.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.5 5.5 7.0 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 5.0 6.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 5.5 7.0 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 10.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 5.0 6.0 ns tSU Register setup time 1.1 2.0 4.0 ns Altera Corporation 49

MAX 7000 Programmable Logic Device Family Data Sheet Table 36.EPM7192S Internal Timing Parameters (Part 2 of 2) Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tH Register hold time 1.7 3.0 4.0 ns tFSU Register setup time of fast 2.3 3.0 2.0 ns input tFH Register hold time of fast 0.7 0.5 1.0 ns input tRD Register delay 1.4 2.0 1.0 ns tCOMB Combinatorial delay 1.2 2.0 1.0 ns tIC Array clock delay 3.2 5.0 6.0 ns tEN Register enable time 3.1 5.0 6.0 ns tGLOB Global control delay 2.5 1.0 1.0 ns tPRE Register preset time 2.7 3.0 4.0 ns tCLR Register clear time 2.7 3.0 4.0 ns tPIA PIA delay (7) 2.4 1.0 2.0 ns tLPA Low-power adder (8) 10.0 11.0 13.0 ns Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. 50 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Tables37 and 38 show the EPM7256S AC operating conditions. Table 37.EPM7256S External Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tPD1 Input to non-registered output C1 = 35 pF 7.5 10.0 15.0 ns tPD2 I/O input to non-registered C1 = 35 pF 7.5 10.0 15.0 ns output tSU Global clock setup time 3.9 7.0 11.0 ns tH Global clock hold time 0.0 0.0 0.0 ns tFSU Global clock setup time of fast 3.0 3.0 3.0 ns input tFH Global clock hold time of fast 0.0 0.5 0.0 ns input tCO1 Global clock to output delay C1 = 35 pF 4.7 5.0 8.0 ns tCH Global clock high time 3.0 4.0 5.0 ns tCL Global clock low time 3.0 4.0 5.0 ns tASU Array clock setup time 0.8 2.0 4.0 ns tAH Array clock hold time 1.9 3.0 4.0 ns tACO1 Array clock to output delay C1 = 35 pF 7.8 10.0 15.0 ns tACH Array clock high time 3.0 4.0 6.0 ns tACL Array clock low time 3.0 4.0 6.0 ns tCPPW Minimum pulse width for clear (2) 3.0 4.0 6.0 ns and preset tODH Output data hold time after C1 = 35 pF (3) 1.0 1.0 1.0 ns clock tCNT Minimum global clock period 7.8 10.0 13.0 ns fCNT Maximum internal global clock (4) 128.2 100.0 76.9 MHz frequency tACNT Minimum array clock period 7.8 10.0 13.0 ns fACNT Maximum internal array clock (4) 128.2 100.0 76.9 MHz frequency fMAX Maximum clock frequency (5) 166.7 125.0 100.0 MHz Altera Corporation 51

MAX 7000 Programmable Logic Device Family Data Sheet Table 38.EPM7256S Internal Timing Parameters Note (1) Symbol Parameter Conditions Speed Grade Unit -7 -10 -15 Min Max Min Max Min Max tIN Input pad and buffer delay 0.3 0.5 2.0 ns tIO I/O input pad and buffer delay 0.3 0.5 2.0 ns tFIN Fast input delay 3.4 1.0 2.0 ns tSEXP Shared expander delay 3.9 5.0 8.0 ns tPEXP Parallel expander delay 1.1 0.8 1.0 ns tLAD Logic array delay 2.6 5.0 6.0 ns tLAC Logic control array delay 2.6 5.0 6.0 ns tIOE Internal output enable delay 0.8 2.0 3.0 ns tOD1 Output buffer and pad delay C1 = 35 pF 0.5 1.5 4.0 ns tOD2 Output buffer and pad delay C1 = 35 pF (6) 1.0 2.0 5.0 ns tOD3 Output buffer and pad delay C1 = 35 pF 5.5 5.5 8.0 ns tZX1 Output buffer enable delay C1 = 35 pF 4.0 5.0 6.0 ns tZX2 Output buffer enable delay C1 = 35 pF (6) 4.5 5.5 7.0 ns tZX3 Output buffer enable delay C1 = 35 pF 9.0 9.0 10.0 ns tXZ Output buffer disable delay C1 = 5 pF 4.0 5.0 6.0 ns tSU Register setup time 1.1 2.0 4.0 ns tH Register hold time 1.6 3.0 4.0 ns tFSU Register setup time of fast 2.4 3.0 2.0 ns input tFH Register hold time of fast 0.6 0.5 1.0 ns input tRD Register delay 1.1 2.0 1.0 ns tCOMB Combinatorial delay 1.1 2.0 1.0 ns tIC Array clock delay 2.9 5.0 6.0 ns tEN Register enable time 2.6 5.0 6.0 ns tGLOB Global control delay 2.8 1.0 1.0 ns tPRE Register preset time 2.7 3.0 4.0 ns tCLR Register clear time 2.7 3.0 4.0 ns tPIA PIA delay (7) 3.0 1.0 2.0 ns tLPA Low-power adder (8) 10.0 11.0 13.0 ns 52 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Notes to tables: (1) These values are specified under the recommended operating conditions shown in Table14. See Figure13 for more information on switching waveforms. (2) This minimum pulse width for preset and clear applies for both global clear and array controls. The tLPA parameter must be added to this minimum width if the clear or reset signal incorporates the tLAD parameter into the signal path. (3) This parameter is a guideline that is sample-tested only and is based on extensive device characterization. This parameter applies for both global and array clocking. (4) These parameters are measured with a 16-bit loadable, enabled, up/down counter programmed into each LAB. (5) The fMAX values represent the highest frequency for pipelined data. (6) Operating conditions: VCCIO = 3.3 V ± 10% for commercial and industrial use. (7) For EPM7064S-5, EPM7064S-6, EPM7128S-6, EPM7160S-6, EPM7160S-7, EPM7192S-7, and EPM7256S-7 devices, these values are specified for a PIA fan-out of one LAB (16 macrocells). For each additional LAB fan-out in these devices, add an additional 0.1 ns to the PIA timing value. (8) The tLPA parameter must be added to the tLAD, tLAC, tIC, tEN, tSEXP, tACL, and tCPPW parameters for macrocells running in the low-power mode. Power Supply power (P) versus frequency (f in MHz) for MAX 7000 devices MAX is calculated with the following equation: Consumption P = P + P = I × V + P INT IO CCINT CC IO The P value, which depends on the device output load characteristics IO and switching frequency, can be calculated using the guidelines given in Application Note 74 (Evaluating Power for Altera Devices). The I value, which depends on the switching frequency and the CCINT application logic, is calculated with the following equation: I = CCINT A × MC + B × (MC – MC ) + C × MC × f × tog TON DEV TON USED MAX LC The parameters in this equation are shown below: MC = Number of macrocells with the Turbo Bit option turned on, TON as reported in the MAX+PLUS II Report File (.rpt) MC = Number of macrocells in the device DEV MC = Total number of macrocells in the design, as reported USED in the MAX+PLUS II Report File (.rpt) f = Highest clock frequency to the device MAX tog = Average ratio of logic cells toggling at each clock LC (typically 0.125) A, B, C = Constants, shown in Table39 Altera Corporation 53

MAX 7000 Programmable Logic Device Family Data Sheet Table 39.MAX 7000 I Equation Constants CC Device A B C EPM7032 1.87 0.52 0.144 EPM7064 1.63 0.74 0.144 EPM7096 1.63 0.74 0.144 EPM7128E 1.17 0.54 0.096 EPM7160E 1.17 0.54 0.096 EPM7192E 1.17 0.54 0.096 EPM7256E 1.17 0.54 0.096 EPM7032S 0.93 0.40 0.040 EPM7064S 0.93 0.40 0.040 EPM7128S 0.93 0.40 0.040 EPM7160S 0.93 0.40 0.040 EPM7192S 0.93 0.40 0.040 EPM7256S 0.93 0.40 0.040 This calculation provides an I estimate based on typical conditions CC using a pattern of a 16-bit, loadable, enabled, up/down counter in each LAB with no output load. Actual I values should be verified during CC operation because this measurement is sensitive to the actual pattern in the device and the environmental operating conditions. 54 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure14 shows typical supply current versus frequency for MAX7000 devices. Figure 14. I vs. Frequency for MAX 7000 Devices (Part 1 of 2) CC EPM7032 EPM7064 180 VRCoCo m= 5Te.0m Vperature 300 VRCoCo m= 5Te.0m Vperature 151.5 MHz 151.5 MHz 140 High Speed 200 Typical I High Speed Typical I CC 100 CC Active (mA) Active (mA) 60.2 MHz 60 100 60.2 MHz Low Power 20 Low Power 0 50 100 150 200 0 50 100 150 200 Frequency (MHz) Frequency (MHz) EPM7096 V = 5.0 V CC 450 Room Temperature 125 MHz 350 High Speed Typical I CC 250 Active (mA) 55.5 MHz 150 Low Power 50 0 50 100 150 Frequency (MHz) Altera Corporation 55

MAX 7000 Programmable Logic Device Family Data Sheet Figure 14. I vs. Frequency for MAX 7000 Devices (Part 2 of 2) CC EPM7128E EPM7160E 500 500 VCC = 5.0 V VCC = 5.0 V Room Temperature Room Temperature 400 400 100 MHz 125 MHz Typical I C C 300 Typical I C C 300 Active (mA) Active (mA) High Speed High Speed 200 200 47.6 MHz 55.5 MHz 100 100 Low Power Low Power 0 50 100 150 200 0 50 100 150 200 Frequency (MHz) Frequency (MHz) EPM7192E EPM7256E 500 750 VCC = 5.0 V 90.9 MHz VCC = 5.0 V Room Temperature Room Temperature 400 600 90.9 MHz Typical I 300 High Speed Typical I 450 CC CC High Speed Active (mA) Active (mA) 43.5 MHz 200 300 43.4 MHz Low Power 100 150 Low Power 0 25 50 75 100 125 0 25 50 75 100 125 Frequency (MHz) Frequency (MHz) 56 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure15 shows typical supply current versus frequency for MAX7000S devices. Figure 15. I vs. Frequency for MAX 7000S Devices (Part 1 of 2) CC EPM7032S EPM7064S VCC = 5.0 V VCC = 5.0 V 60 Room Temperature 120 Room Temperature 175.4 MHz 50 142.9 MHz 100 Typical I C C 40 High Speed Typical I C C 80 High Speed Active (mA) Active (mA) 30 60 20 58.8 MHz 40 56.5 MHz Low Power Low Power 10 20 0 50 100 150 200 0 50 100 150 200 Frequency (MHz) Frequency (MHz) EPM7128S EPM7160S 280 VRCoCo m= 5Te.0m Vperature 300 VRCoCo m= 5Te.0m Vperature 240 149.3 MHz 147.1 MHz 240 200 Typical I C C 160 Typical I C C 180 High Speed Active (mA) High Speed Active (mA) 120 120 56.2 MHz 56.5 MHz 80 40 Low Power 60 Low Power 0 50 100 150 200 0 50 100 150 200 Frequency (MHz) Frequency (MHz) Altera Corporation 57

MAX 7000 Programmable Logic Device Family Data Sheet Figure 15. I vs. Frequency for MAX 7000S Devices (Part 2 of 2) CC EPM7192S EPM7256S VCC = 5.0 V VCC = 5.0 V 300 Room Temperature 400 Room Temperature 125.0 MHz 128.2 MHz 240 High Speed 300 High Speed Typical I C C Typical I C C Active (mA) 180 Active (mA) 200 55.6 MHz 56.2 MHz 120 Low Power 100 Low Power 60 0 25 50 75 100 125 0 25 50 75 100 125 Frequency (MHz) Frequency (MHz) Device See the Altera web site (http://www.altera.com) or the Altera Digital Library for pin-out information. Pin-Outs 58 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figures16 through 22 show the package pin-out diagrams for MAX7000 devices. Figure 16. 44-Pin Package Pin-Out Diagram Package outlines not drawn to scale. Pin 1 I/O I/O I/O VCC (1)INPUT/OE2/(GCLK2) INPUT/GCLRn INPUT/OE1 INPUT//GCLK1 GND I/O I/O Pin 34 I/OI/OI/OVCC (1)INPUT/OE2/(GCLK2) INPUT/GCLRnINPUT/OE1INPUT/GCLK1GNDI/OI/O 6 5 4 3 2 1 44 43 42 41 40 (2) I/O/(TDI) I/O (2) I/O/(TDI) 7 39 I/O I/O I/O/(TDO) (2) I/O 8 38 I/O/(TDO) (2) I/O I/O I/O 9 37 I/O GND I/O GND 10 36 I/O I/O VCC I/O 11 EPM7032 35 VCC I/O I/O I/O 12 EPM7032S 34 I/O (2) I/O/(TMS) EPM7032 I/O (2) I/O/(TMI/SO) 1134 EPM7064 3332 II//OO/(TCK) (2) I/O I/O/(TCK) (2) VCC 15 EPM7064S 31 I/O VCC I/O I/O 16 30 GND I/O GND I/O 17 29 I/O I/O I/O 18 19 20 21 22 23 24 25 26 27 28 Pin 12 I/O I/O I/O I/O GND VCC I/O I/O I/O I/O I/O Pin 23 I/OI/OI/OI/OGNDVCCI/OI/OI/OI/OI/O 44-Pin PQFP 44-Pin PLCC (1)K2) CL E2/(G CLRn E1 CLK1 O G O G Pin 1 I/O I/O I/O VCC INPUT/ INPUT/ INPUT/ INPUT/ GND I/O I/O Pin 34 (2) I/O/(TDI) I/O I/O I/O/(TDO) (2) I/O I/O GND I/O I/O EPM7032 VCC I/O EPM7032S I/O (2) I/O/(TMS) EPM7064 I/O I/O EPM7064S I/O/(TCK) (2) VCC I/O I/O GND I/O I/O Pin 12 I/O I/O I/O I/O GND VCC I/O I/O I/O I/O I/O Pin 23 44-Pin TQFP Notes: (1) The pin functions shown in parenthesis are only available in MAX 7000E and MAX 7000S devices. (2) JTAG ports are available in MAX 7000S devices only. Altera Corporation 59

MAX 7000 Programmable Logic Device Family Data Sheet Figure 17. 68-Pin Package Pin-Out Diagram Package outlines not drawn to scale. I/OI/OI/OGNDI/OI/OVCCINT(1)INPUT/OE2/(GCLK2) INPUT/GCLRnINPUT/OE1INPUT/GCLK1GNDI/OI/OVCCIOI/OI/O 9876543216867666564636261 I/O 10 60 I/O VCCIO 11 59 I/O (2) I/O/(TDI) 12 58 GND I/O 13 57 I/O/(TDO) (2) I/O 14 56 I/O I/O 15 55 I/O GND 16 54 I/O I/O 17 53 VCCIO I/O 18 52 I/O (2) I/O/(TMS) 19 51 I/O I/O 20 EPM7064 50 I/O/(TCK) (2) VCCIO 21 EPM7096 49 I/O I/O 22 48 GND I/O 23 47 I/O I/O 24 46 I/O I/O 25 45 I/O GND 26 44 I/O 2728293031323334353637383940414243 I/OI/OI/OI/OVCCIOI/OI/OGNDVCCINTI/OI/OGNDI/OI/OI/OI/OVCCIO 68-Pin PLCC Notes: (1) The pin functions shown in parenthesis are only available in MAX 7000E and MAX 7000S devices. (2) JTAG ports are available in MAX 7000S devices only. 60 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure 18. 84-Pin Package Pin-Out Diagram Package outline not drawn to scale. I/OI/OI/OI/OGND (1)I/O I/OI/OVCCINT (2)INPUT/OE2/(GCLK2) INPUT/GLCRnINPUT/OE1INPUT/GCLK1GNDI/OI/O(1)I/O VCCIOI/OI/OI/O 111098765432184838281807978777675 I/O 12 74 I/O VCCIO 13 73 I/O (3)I/O/(TDI) 14 72 GND I/O 15 71 I/O/(TDO)(3) I/O 16 70 I/O I/O 17 69 I/O GNI/OD 1189 EPM7064 6687 II//OO I/O 20 EPM7064S 66 VCCIO I/O 21 65 I/O I/O 22 EPM7096 64 I/O (3)I/O/(TMS) 23 63 I/O I/O 24 EPM7128E 62 I/O/(TCK) (3) I/O 25 61 I/O VCCIO 26 EPM7128S 60 I/O I/O 27 59 GND I/O 28 EPM7160E 58 I/O II//OO 2390 EPM7160S 5576 II//OO I/O 31 55 I/O GND 32 54 I/O 333435363738394041424344454647484950515253 I/OI/OI/OI/OI/OVCCIO (1)I/O I/OI/OGNDVCCINTI/OI/O (1)I/O GNDI/OI/OI/OI/OI/OVCCIO 84-Pin PLCC Notes: (1) Pins 6, 39, 46, and 79 are no-connect (N.C.) pins on EPM7096, EPM7160E, and EPM7160S devices. (2) The pin functions shown in parenthesis are only available in MAX 7000E and MAX 7000S devices. (3) JTAG ports are available in MAX 7000S devices only. Altera Corporation 61

MAX 7000 Programmable Logic Device Family Data Sheet Figure 19. 100-Pin Package Pin-Out Diagram Package outline not drawn to scale. Pin 1 Pin 81 Pin 1 Pin 76 EPM7064 EPM7064S EPM7096 EPM7128S EPM7128E EPM7160S EPM7128S EPM7160E Pin 31 Pin 51 Pin 26 Pin 51 100-Pin PQFP 100-Pin TQFP Figure 20. 160-Pin Package Pin-Out Diagram Package outline not drawn to scale. Pin 1 Pin 121 R P N M L K J EPM7192E EPM7128E H Bottom EPM7128S G View EPM7160E F EPM7160S E EPM7192E D EPM7192S C EPM7256E B A Pin 41 Pin 81 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 160-Pin PGA 160-Pin PQFP 62 Altera Corporation

MAX 7000 Programmable Logic Device Family Data Sheet Figure 21. 192-Pin Package Pin-Out Diagram Package outline not drawn to scale. U T R P N M L K EPM7256E J Bottom H View G F E D C B A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 192-Pin PGA Figure 22. 208-Pin Package Pin-Out Diagram Package outline not drawn to scale. Pin 1 Pin 157 EPM7256E EPM7256S Pin 53 Pin 105 208-Pin PQFP/RQFP Altera Corporation 63

MAX 7000 Programmable Logic Device Family Data Sheet Revision The information contained in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.7 supersedes information published in History previous versions. The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.7: Version 6.7 The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.7: ■ Reference to AN 88: Using the Jam Language for ISP & ICR via an Embedded Processor has been replaced by AN 122: Using Jam STAPL for ISP & ICR via an Embedded Processor. Version 6.6 The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.6: ■ Added Tables6 through 8. ■ Added “Programming Sequence” section on page 17 and “Programming Times” section on page 18. Version 6.5 The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.5: ■ Updated text on page16. Version 6.4 The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.4: ■ Added Note (5) on page28. Version 6.3 The following changes were made in the MAX 7000 Programmable Logic Device Family Data Sheet version 6.3: ■ Updated the “Open-Drain Output Option (MAX 7000S Devices Only)” section on page 20. 64 Altera Corporation

Notes: Altera Corporation 65

MAX 7000 Programmable Logic Device Family Data Sheet Copyright © 2005 Altera Corporation. All rights reserved. Altera, The Programmable Solutions Company, the stylized Altera logo, specific device designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their re- spective holders. Altera products are protected under numerous U.S. and foreign patents and pending 101 Innovation Drive applications, maskwork rights, and copyrights. Altera warrants performance of its semiconductor products San Jose, CA 95134 to current specifications in accordance with Altera's standard warranty, but reserves the right to make chang- (408) 544-7000 es to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service described www.altera.com herein except as expressly agreed to in writing by Altera Corporation. Altera customers Applications Hotline: are advised to obtain the latest version of device specifications before relying on any pub- (800) 800-EPLD lished information and before placing orders for products or services. Literature Services: literature@altera.com 66 Altera Corporation