MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LXZ Series LXZ ・Adoption of innovative electrolyte and new technologies Lower Z Downsized ・Very low impedance at high frequency LXY ・Endurance with ripple current: 2,000 to 8,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Lower Z ・RoHS2 Compliant LXV ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category -55 to +105℃ Temperature Range Rated Voltage Range 6.3 to 63Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Leakage Current I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V (tanδ) tanδ(Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 & 6.3 : 2,000hours φ8 : 3,000hours φ10 : 5,000hoursφ12.5 : 7,000hours φ16 & 18 : 8,000hours Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal Code : E Sleeve (PET : Dark blue) 5 5 dφ 0.± 0.± F F φD 5 6.3 8 10 12.5 16 18 D' φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 φ F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φD' φD+0.5max. L' 15min. 4min. (φ5 to φ10) (φ12.5 to φ18) L' L+1.5max. Vent Gas escape end seal (Exceptφ5 & φ6.3) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E LXZ E M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150µF:151, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LXZ Series ◆STANDARD RATINGS Rated Rated Impedance Impedance ripple ripple (Ω max./100kHz) (Ω max./100kHz) WV Cap Case size current WV Cap Case size current Part No. Part No. (Vdc) (µF) φD×L(mm) (mArms/ (Vdc) (µF) φD×L(mm) (mArms/ 20℃ -10℃ 105℃, 20℃ -10℃ 105℃, 100kHz) 100kHz) 150 5×11.5 0.50 1.0 175 ELXZ6R3E□□151MEB5D 2,700 16×20 0.029 0.058 2,210 ELXZ160E□□272ML20S 330 6.3×11.5 0.25 0.50 290 ELXZ6R3E□□331MFB5D 3,300 12.5×35 0.022 0.044 2,510 ELXZ160E□□332MK35S 470 6.3×15 0.18 0.36 400 ELXZ6R3E□□471MF15D 3,900 12.5×40 0.017 0.034 2,870 ELXZ160E□□392MK40S 680 8×12 0.12 0.24 555 ELXZ6R3E□□681MH12D 3,900 16×25 0.022 0.044 2,560 ELXZ160E□□392ML25S 820 10×12.5 0.090 0.18 760 ELXZ6R3E□□821MJC5S 3,900 18×20 0.028 0.056 2,490 ELXZ160E□□392MM20S 1,000 8×15 0.090 0.18 730 ELXZ6R3E□□102MH15D 4,700 16×30 0.019 0.038 3,010 ELXZ160E□□472ML30S 16 1,200 8×20 0.080 0.16 810 ELXZ6R3E□□122MH20D 4,700 18×25 0.020 0.040 2,740 ELXZ160E□□472MM25S 1,200 10×16 0.068 0.136 1,050 ELXZ6R3E□□122MJ16S 5,600 16×35 0.017 0.034 3,150 ELXZ160E□□562ML35S 1,500 10×20 0.052 0.104 1,220 ELXZ6R3E□□152MJ20S 5,600 18×30 0.018 0.036 3,330 ELXZ160E□□562MM30S 2,200 10×25 0.045 0.090 1,440 ELXZ6R3E□□222MJ25S 6,800 16×40 0.015 0.030 3,710 ELXZ160E□□682ML40S 2,700 10×30 0.037 0.074 1,690 ELXZ6R3E□□272MJ30S 8,200 18×35 0.016 0.032 3,680 ELXZ160E□□822MM35S 3,300 12.5×20 0.038 0.076 1,660 ELXZ6R3E□□332MK20S 10,000 18×40 0.015 0.030 3,800 ELXZ160E□□103MM40S 3,900 12.5×25 0.030 0.060 1,950 ELXZ6R3E□□392MK25S 47 5×11.5 0.50 1.0 175 ELXZ250E□□470MEB5D 6.3 4,700 12.5×30 0.025 0.050 2,310 ELXZ6R3E□□472MK30S 100 6.3×11.5 0.25 0.50 290 ELXZ250E□□101MFB5D 5,600 12.5×35 0.022 0.044 2,510 ELXZ6R3E□□562MK35S 150 6.3×15 0.18 0.36 400 ELXZ250E□□151MF15D 5,600 16×20 0.029 0.058 2,210 ELXZ6R3E□□562ML20S 220 8×12 0.12 0.24 555 ELXZ250E□□221MH12D 6,800 12.5×40 0.017 0.034 2,870 ELXZ6R3E□□682MK40S 330 8×15 0.090 0.18 730 ELXZ250E□□331MH15D 6,800 16×25 0.022 0.044 2,560 ELXZ6R3E□□682ML25S 330 10×12.5 0.090 0.18 760 ELXZ250E□□331MJC5S 6,800 18×20 0.028 0.056 2,490 ELXZ6R3E□□682MM20S 390 8×20 0.080 0.16 810 ELXZ250E□□391MH20D 8,200 16×30 0.019 0.038 3,010 ELXZ6R3E□□822ML30S 470 10×16 0.068 0.136 1,050 ELXZ250E□□471MJ16S 10,000 16×35 0.017 0.034 3,150 ELXZ6R3E□□103ML35S 680 10×20 0.052 0.104 1,220 ELXZ250E□□681MJ20S 10,000 18×25 0.020 0.040 2,740 ELXZ6R3E□□103MM25S 820 10×25 0.045 0.090 1,440 ELXZ250E□□821MJ25S 12,000 16×40 0.015 0.030 3,710 ELXZ6R3E□□123ML40S 1,000 10×30 0.037 0.074 1,690 ELXZ250E□□102MJ30S 12,000 18×30 0.018 0.036 3,330 ELXZ6R3E□□123MM30S 1,000 12.5×20 0.038 0.076 1,660 ELXZ250E□□102MK20S 15,000 18×35 0.016 0.032 3,680 ELXZ6R3E□□153MM35S 1,500 12.5×25 0.030 0.060 1,950 ELXZ250E□□152MK25S 18,000 18×40 0.015 0.030 3,800 ELXZ6R3E□□183MM40S 1,800 12.5×30 0.025 0.050 2,310 ELXZ250E□□182MK30S 100 5×11.5 0.50 1.0 175 ELXZ100E□□101MEB5D 25 1,800 16×20 0.029 0.058 2,210 ELXZ250E□□182ML20S 220 6.3×11.5 0.25 0.50 290 ELXZ100E□□221MFB5D 2,200 12.5×30 0.025 0.050 2,310 ELXZ250E□□222MK30S 330 6.3×15 0.18 0.36 400 ELXZ100E□□331MF15D 2,200 12.5×35 0.022 0.044 2,510 ELXZ250E□□222MK35S 470 8×12 0.12 0.24 555 ELXZ100E□□471MH12D 2,200 18×20 0.028 0.056 2,490 ELXZ250E□□222MM20S 680 8×15 0.090 0.18 730 ELXZ100E□□681MH15D 2,700 12.5×40 0.017 0.034 2,870 ELXZ250E□□272MK40S 680 10×12.5 0.090 0.18 760 ELXZ100E□□681MJC5S 2,700 16×25 0.022 0.044 2,560 ELXZ250E□□272ML25S 1,000 8×20 0.080 0.16 810 ELXZ100E□□102MH20D 3,300 16×25 0.022 0.044 2,560 ELXZ250E□□332ML25S 1,000 10×16 0.068 0.136 1,050 ELXZ100E□□102MJ16S 3,300 16×30 0.019 0.038 3,010 ELXZ250E□□332ML30S 1,200 10×20 0.052 0.104 1,220 ELXZ100E□□122MJ20S 3,300 18×20 0.028 0.056 2,490 ELXZ250E□□332MM20S 1,500 10×25 0.045 0.090 1,440 ELXZ100E□□152MJ25S 3,300 18×25 0.020 0.040 2,740 ELXZ250E□□332MM25S 1,800 10×30 0.037 0.074 1,690 ELXZ100E□□182MJ30S 3,900 16×35 0.017 0.034 3,150 ELXZ250E□□392ML35S 2,200 10×30 0.037 0.074 1,690 ELXZ100E□□222MJ30S 3,900 18×30 0.018 0.036 3,330 ELXZ250E□□392MM30S 2,200 12.5×20 0.038 0.076 1,660 ELXZ100E□□222MK20S 4,700 16×40 0.015 0.030 3,710 ELXZ250E□□472ML40S 10 3,300 12.5×25 0.030 0.060 1,950 ELXZ100E□□332MK25S 4,700 18×35 0.016 0.032 3,680 ELXZ250E□□472MM35S 3,900 12.5×30 0.025 0.050 2,310 ELXZ100E□□392MK30S 5,600 18×40 0.015 0.030 3,800 ELXZ250E□□562MM40S 3,900 16×20 0.029 0.058 2,210 ELXZ100E□□392ML20S 33 5×11.5 0.50 1.0 175 ELXZ350E□□330MEB5D 4,700 12.5×35 0.022 0.044 2,510 ELXZ100E□□472MK35S 56 6.3×11.5 0.25 0.50 290 ELXZ350E□□560MFB5D 5,600 12.5×40 0.017 0.034 2,870 ELXZ100E□□562MK40S 100 6.3×15 0.18 0.36 400 ELXZ350E□□101MF15D 5,600 16×25 0.022 0.044 2,560 ELXZ100E□□562ML25S 150 8×12 0.12 0.24 555 ELXZ350E□□151MH12D 5,600 18×20 0.028 0.056 2,490 ELXZ100E□□562MM20S 220 8×15 0.090 0.18 730 ELXZ350E□□221MH15D 6,800 16×30 0.019 0.038 3,010 ELXZ100E□□682ML30S 220 10×12.5 0.090 0.18 760 ELXZ350E□□221MJC5S 6,800 18×25 0.020 0.040 2,740 ELXZ100E□□682MM25S 270 8×20 0.080 0.16 810 ELXZ350E□□271MH20D 8,200 16×35 0.017 0.034 3,150 ELXZ100E□□822ML35S 330 10×16 0.068 0.136 1,050 ELXZ350E□□331MJ16S 8,200 18×30 0.018 0.036 3,330 ELXZ100E□□822MM30S 470 10×20 0.052 0.104 1,220 ELXZ350E□□471MJ20S 10,000 16×40 0.015 0.030 3,710 ELXZ100E□□103ML40S 560 10×20 0.052 0.104 1,220 ELXZ350E□□561MJ20S 10,000 18×35 0.016 0.032 3,680 ELXZ100E□□103MM35S 560 10×25 0.045 0.090 1,440 ELXZ350E□□561MJ25S 12,000 18×40 0.015 0.030 3,800 ELXZ100E□□123MM40S 680 10×30 0.037 0.074 1,690 ELXZ350E□□681MJ30S 47 5×11.5 0.50 1.0 175 ELXZ160E□□470MEB5D 680 12.5×20 0.038 0.076 1,660 ELXZ350E□□681MK20S 35 100 6.3×11.5 0.25 0.50 290 ELXZ160E□□101MFB5D 1,000 12.5×20 0.038 0.076 1,660 ELXZ350E□□102MK20S 220 6.3×15 0.18 0.36 400 ELXZ160E□□221MF15D 1,000 12.5×25 0.030 0.060 1,950 ELXZ350E□□102MK25S 330 8×12 0.12 0.24 555 ELXZ160E□□331MH12D 1,200 12.5×30 0.025 0.050 2,310 ELXZ350E□□122MK30S 470 8×15 0.090 0.18 730 ELXZ160E□□471MH15D 1,200 16×20 0.029 0.058 2,210 ELXZ350E□□122ML20S 470 10×12.5 0.090 0.18 760 ELXZ160E□□471MJC5S 1,500 12.5×35 0.022 0.044 2,510 ELXZ350E□□152MK35S 560 8×20 0.080 0.16 810 ELXZ160E□□561MH20D 1,800 12.5×40 0.017 0.034 2,870 ELXZ350E□□182MK40S 16 680 10×16 0.068 0.136 1,050 ELXZ160E□□681MJ16S 1,800 16×25 0.022 0.044 2,560 ELXZ350E□□182ML25S 1,000 10×20 0.052 0.104 1,220 ELXZ160E□□102MJ20S 1,800 18×20 0.028 0.056 2,490 ELXZ350E□□182MM20S 1,200 10×25 0.045 0.090 1,440 ELXZ160E□□122MJ25S 2,200 16×25 0.022 0.044 2,560 ELXZ350E□□222ML25S 1,500 10×30 0.037 0.074 1,690 ELXZ160E□□152MJ30S 2,200 16×30 0.019 0.038 3,010 ELXZ350E□□222ML30S 1,500 12.5×20 0.038 0.076 1,660 ELXZ160E□□152MK20S 2,200 18×20 0.028 0.056 2,490 ELXZ350E□□222MM20S 2,200 12.5×25 0.030 0.060 1,950 ELXZ160E□□222MK25S 2,200 18×25 0.020 0.040 2,740 ELXZ350E□□222MM25S 2,700 12.5×30 0.025 0.050 2,310 ELXZ160E□□272MK30S 2,700 16×35 0.017 0.034 3,150 ELXZ350E□□272ML35S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LXZ Series ◆STANDARD RATINGS Rated Rated Impedance Impedance ripple ripple (Ω max./100kHz) (Ω max./100kHz) WV Cap Case size current WV Cap Case size current Part No. Part No. (Vdc) (µF) φD×L(mm) (mArms/ (Vdc) (µF) φD×L(mm) (mArms/ 20℃ -10℃ 105℃, 20℃ -10℃ 105℃, 100kHz) 100kHz) 2,700 18×30 0.018 0.036 3,330 ELXZ350E□□272MM30S 2,200 18×35 0.023 0.046 3,100 ELXZ500E□□222MM35S 50 3,300 16×40 0.015 0.030 3,710 ELXZ350E□□332ML40S 2,700 18×40 0.020 0.040 3,400 ELXZ500E□□272MM40S 35 3,300 18×35 0.016 0.032 3,680 ELXZ350E□□332MM35S 12 5×11.5 1.9 4.0 145 ELXZ630E□□120MEB5D 3,900 18×40 0.015 0.030 3,800 ELXZ350E□□392MM40S 22 6.3×11.5 1.0 2.0 240 ELXZ630E□□220MFB5D 4,700 18×40 0.015 0.030 3,800 ELXZ350E□□472MM40S 39 6.3×15 0.61 1.4 330 ELXZ630E□□390MF15D 22 5×11.5 0.90 1.8 155 ELXZ500E□□220MEB5D 68 8×12 0.34 0.75 405 ELXZ630E□□680MH12D 47 6.3×11.5 0.45 0.90 260 ELXZ500E□□470MFB5D 100 8×15 0.27 0.65 535 ELXZ630E□□101MH15D 68 6.3×15 0.31 0.62 360 ELXZ500E□□680MF15D 100 10×12.5 0.255 0.51 540 ELXZ630E□□101MJC5S 100 8×12 0.22 0.44 485 ELXZ500E□□101MH12D 120 10×16 0.19 0.38 600 ELXZ630E□□121MJ16S 120 8×15 0.16 0.32 635 ELXZ500E□□121MH15D 150 8×20 0.21 0.52 690 ELXZ630E□□151MH20D 120 10×12.5 0.16 0.32 620 ELXZ500E□□121MJC5S 180 10×20 0.145 0.29 890 ELXZ630E□□181MJ20S 180 8×20 0.12 0.24 730 ELXZ500E□□181MH20D 220 10×25 0.13 0.26 1,050 ELXZ630E□□221MJ25S 180 10×16 0.13 0.26 850 ELXZ500E□□181MJ16S 330 10×30 0.090 0.18 1,300 ELXZ630E□□331MJ30S 220 10×20 0.088 0.18 1,050 ELXZ500E□□221MJ20S 330 12.5×20 0.085 0.17 1,290 ELXZ630E□□331MK20S 330 10×25 0.073 0.15 1,250 ELXZ500E□□331MJ25S 390 12.5×25 0.070 0.14 1,720 ELXZ630E□□391MK25S 390 10×30 0.054 0.11 1,500 ELXZ500E□□391MJ30S 470 12.5×30 0.055 0.11 2,090 ELXZ630E□□471MK30S 63 390 12.5×20 0.059 0.12 1,480 ELXZ500E□□391MK20S 470 16×20 0.059 0.12 1,770 ELXZ630E□□471ML20S 50 470 12.5×20 0.059 0.12 1,480 ELXZ500E□□471MK20S 680 12.5×35 0.047 0.094 2,270 ELXZ630E□□681MK35S 560 12.5×25 0.044 0.088 1,840 ELXZ500E□□561MK25S 680 16×25 0.050 0.10 2,160 ELXZ630E□□681ML25S 680 12.5×30 0.039 0.078 2,220 ELXZ500E□□681MK30S 680 18×20 0.055 0.11 2,290 ELXZ630E□□681MM20S 680 16×20 0.048 0.096 1,840 ELXZ500E□□681ML20S 820 12.5×40 0.042 0.084 2,560 ELXZ630E□□821MK40S 820 12.5×35 0.033 0.066 2,290 ELXZ500E□□821MK35S 820 16×30 0.043 0.086 2,670 ELXZ630E□□821ML30S 820 18×20 0.042 0.084 1,980 ELXZ500E□□821MM20S 820 18×25 0.043 0.086 2,590 ELXZ630E□□821MM25S 1,000 12.5×40 0.029 0.058 2,500 ELXZ500E□□102MK40S 1,000 16×30 0.043 0.086 2,670 ELXZ630E□□102ML30S 1,000 16×25 0.034 0.068 2,240 ELXZ500E□□102ML25S 1,000 16×35 0.036 0.072 2,770 ELXZ630E□□102ML35S 1,200 16×30 0.028 0.056 2,700 ELXZ500E□□122ML30S 1,200 16×40 0.030 0.060 2,850 ELXZ630E□□122ML40S 1,200 18×25 0.029 0.058 2,610 ELXZ500E□□122MM25S 1,200 18×30 0.032 0.064 2,950 ELXZ630E□□122MM30S 1,500 16×35 0.025 0.050 2,800 ELXZ500E□□152ML35S 1,500 18×35 0.030 0.060 3,100 ELXZ630E□□152MM35S 1,800 16×40 0.021 0.042 3,200 ELXZ500E□□182ML40S 1,800 18×40 0.025 0.050 3,210 ELXZ630E□□182MM40S 1,800 18×30 0.025 0.050 3,000 ELXZ500E□□182MM30S 2,200 18×40 0.025 0.050 3,210 ELXZ630E□□222MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 120 1k 10k 100k 12to180 0.40 0.75 0.90 1.00 220to560 0.50 0.85 0.94 1.00 680to1,800 0.60 0.87 0.95 1.00 2,200to3,900 0.75 0.90 0.95 1.00 4,700to18,000 0.85 0.95 0.98 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U