EL SERIES | AC OUTPUT PANEL MOUNT SOLID STATE RELAYS Features • Ratings of 5A, 10A, 20A and 30A @ 24-280 VAC • UL Recognized, TUV, CE and RoHS Compliant. • 5, 12 and 24 VDC control input options • Zero voltage or instantaneous turn-on outputs • LED input status indicator • Thermal Pad Included PRODUCT SELECTION Control Voltage 5 A 10 A 20 A 30 A 4-8 VDC EL240A5-05 EL240A10-05 EL240A20-05 EL240A30-05 10-14 VDC EL240A5-12 EL240A10-12 EL240A20-12 EL240A30-12 21-27 VDC EL240A5-24 EL240A10-24 EL240A20-24 EL240A30-24 Page 1 Copyright © 2018 Sensata Technologies, Inc. www.sensata.com

SPECIFICATIONS Output (3) Description 5 A 10 A 20 A 30 A Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 24-280 Maximum Load Current [Adc] (4) 5 10 20 30 Minimum Load Current [mArms] 150 150 250 250 Transient Overvoltage [Vpk] (2) 600 600 600 600 Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] 115/120 145/150 240/250 260/280 Maximum I²t for Fusing (50/60Hz 1/2 cycle) [A² sec] 65/60 100/95 285/260 338/326 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] 500 500 500 500 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1 0.1 Thermal Resistance Junction to Case (Rjc) [°C/W] 5.5 3.0 1.7 0.9 Maximum On-State Voltage Drop @ Rated Current [Volts] 1.3 1.3 1.3 1.3 Minimum Power Factor (with Maximum Load) (1) 0.7 0.7 0.7 0.7 Input (3) Description EL240Axx-05 EL240Axx-12 EL240Axx-24 Control Voltage Range 4-8 VDC 10-14 VDC 21-27 VDC Minimum Turn-On Voltage 4 VDC 10 VDC 21 VDC Must Turn-Off Voltage 1 VDC 1 VDC 1 VDC Minimum Input Current 6 mA 10 mA 8 mA Maximum Input Current 21 mA 17.50 mA 19 mA Maximum Turn-On Time [msec] (5) 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle General (2) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms Dielectric Strength, Output to Baseplate (50/60Hz) 2500 Vrms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125 °C Weight (typical) 0.5 oz (14.4 g) Terminals 3/16”x 0.032” input, 1/4”x 0.032” output QC SSR Mounting Screw Torque Range 9.0-10.0 lb-in (1.0-1.13 Nm) LED Input Status Indicator Green Humidity per IEC60068-2-78 93% non-condensing Page 2 Copyright © 2018 Sensata Technologies, Inc. www.sensata.com

MECHANICAL SPECIFICATIONS Tolerance: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] THERMAL DERATE INFORMATION Page 3 Copyright © 2018 Sensata Technologies, Inc. www.sensata.com

EQUIVALENT CIRCUIT BLOCK MOUNTING INSTRUCTIONS Choose one of the two mounting options and follow the instructions. Mounting on Heat Sinks • Select adequate heat sink. (Please refer to thermal derating curves for the specific model) • Be sure that thermal pad is pre-installed before installing over the heat sink. • EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included) to mount the EL onto heat sink (See fig. 1). Recommended screw size is 8-32 (UNC standard) or M4 (metric). • Before applying full torque tighten down both screws until they contact the baseplate. Then, tighten them to 9.0-10.0 in-lb (1.0-1.13 Nm). • For optimal thermal performance heat sink fins should be oriented vertically to promote natural convection airflow. Mounting on Panels • Locate the panel section on which the EL will be mounted. Panel mount surface must provide adequate heat sinking capability, uncoated, clean, flat (0.004 in/in recommended) and preferably aluminum. • Be sure that thermal pad is pre-installed before install over the heatsink. • EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included) to mount the EL onto panel. Choose screw length considering the mounting surface hole depth and that the SSR flange thickness is 0.125 in (3.2 mm). • Before applying full torque tighten down both screws until they contact the baseplate. Then, tighten them to 10 in-lb (1.13 Nm). Transient Protection Transients are common on AC power lines, and in extreme cases, may pose a risk for the proper operation and reliability of the SSR and its load. The load which the SSR controls may also generate transients itself. Therefore, inclusion of transient protection for the SSR is highly recommended. Internal transient protection is standard in certain Crydom SSR models, and optionally available in others. The user may also install transient protection external to the SSR for additional protection. Contact Crydom technical support for additional information on use of transient protection for AC output SSRs. Important Considerations Be sure to use input and output voltages within operating ranges. LED indicates only input status. It does not represent output status. Page 4 Copyright © 2018 Sensata Technologies, Inc. www.sensata.com

WIRING DIAGRAMS Example : EL240A30R-05NP ORDERING OPTIONS EL 240A 30 R 05 N P Family EL Output Voltage 240A : 24-280 VAC Rated Load Current 5 : 5 Amps 10 : 10 Amps 20 : 20 Amps 30 : 30 Amps Switching Type Blank : Zero Voltage Turn-On R : Instantaneous Turn-On Control Voltage 05 : 4-8 VDC 12 : 10-14 VDC 24 : 21-27 VDC Termination Blank : Standard Quick Connect N : 90º bent Quick Connect (30 Amps only) Overvoltage Protection Blank : Not Included Required for valid part number P : Included (Only for 30 Amps, Zero Voltage models ) (1)(2) For options only and not required for valid part number GENERAL NOTES (1) For option P minimum power factor (at maximum load) is 0.9 (2) In models with built-in overvoltage protection (“P” option), the output will self trigger between 450-600Vpk, not suitable for capacitive loads. (3) All parameters at 25°C unless otherwise specified. (4) When mounted to the proper size heat sink (see derating curves). (5) Turn-on time for Instantaneous turn-on versions is 0.02 msec (6) Elective Overvoltage Protection, “P” option. Page 5 Copyright © 2018 Sensata Technologies, Inc. www.sensata.com

AGENCY APPROVALS & CERTIFICATIONS Certification in accordance with: United States Standard for Industrial Control Equipment - UL 508 and Canadian Standard Association for Industrial Control Equipment – C22.2 No. 14. TUV SUD according to IEC 60335-1 and EN 62314:2006 Vibration and Shock Resistance: IEC 61373 : Category 1, Class B. WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH • Disconnect all power before installing or working with this equipment • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury. Page 6 Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that CONTACT US incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have Americas been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that +1 (877) 502 5500 specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, sales.crydom@sensata.com improvements and other changes to its data sheets or components without notice. Europe, Middle East & Africa Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO +44 (1202) 416170 OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND ssr-info.eu@sensata.com NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS Asia Pacific ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE sales.isasia@list.sensata.com OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS China +86 (21) 2306 1500 ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET Japan +81 (45) 277 7117 ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD Korea +82 (31) 601 2004 TO SENSATA DATA SHEETS OR USE THEREOF. India +91 (80) 67920890 All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY Rest of Asia +886 (2) 27602006 FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY ext 2808 RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Copyright © 2018 Sensata Technologies, Inc. Rev:12/10/18 ECN 20395 FDE-07-01 Rev. B www.sensata.com