Datasheet Panel Mount EL Series AC Output Panel Mount SSRs • Ratings of 5A, 10A, 20A and 30A @ 24-280 VAC • UL Recognized, TUV, CE and RoHS Compliant. • 5, 12 and 24 VDC control input options • Zero voltage or instantaneous turn-on outputs • LED input status indicator • Thermal Pad Included PRODUCT SELECTION Control Voltage 5 A 10 A 20 A 30 A 4-8 VDC EL240A5-05 EL240A10-05 EL240A20-05 EL240A30-05 10-14 VDC EL240A5-12 EL240A10-12 EL240A20-12 EL240A30-12 21-27 VDC EL240A5-24 EL240A10-24 EL240A20-24 EL240A30-24 AVAILABLE OPTIONS Rated Load Current 5: 5 Amps Control Voltage Overvoltage Protection 10: 10 Amps 05: 4-8 VDC Blank: Not included 20: 20 Amps 12: 10-14 VDC P: Included (Only for 30 Amps, Series 30: 30 Amps 24: 21-27 VDC Zero Voltage models ) (1)(2) EL 240A 30 R 05 N P Output Voltage Switching Type Termination 240A: 24-280 VAC Blank: Zero Voltage Turn-On Blank: Standard Quick Connect R: Instantaneous Turn-On N: 90º bent Quick Connect (30 Amps only) Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (3) Description 5 A 10 A 20 A 30 A Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 24-280 Maximum Load Current [Adc] (4) 5 10 20 30 Minimum Load Current [mArms] 150 150 250 250 Transient Overvoltage [Vpk] (2) 600 600 600 600 Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] 115/120 145/150 240/250 260/280 Maximum I²t for Fusing (50/60Hz 1/2 cycle) [A² sec] 65/60 100/95 285/260 338/326 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1 0.1 Thermal Resistance Junction to Case (Rjc) [°C/W] 5.5 3.0 1.7 0.9 Maximum On-State Voltage Drop @ Rated Current [Volts] 1.3 1.3 1.3 1.3 Minimum Power Factor (at Maximum Load) (1) 0.7 0.7 0.7 0.7 INPUT SPECIFICATIONS (3) Description EL240Axx-05 EL240Axx-12 EL240Axx-24 Control Voltage Range 4-8 VDC 10-14 VDC 21-27 VDC Minimum Turn-On Voltage 4 VDC 10 VDC 21 VDC Must Turn-Off Voltage 1 VDC 1 VDC 1 VDC Minimum Input Current 6 mA 10 mA 8 mA Maximum Input Current 21 mA 17.50 mA 19 mA Maximum Turn-On Time [msec] (5) 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount GENERAL SPECIFICATIONS(2) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms Dielectric Strength, Output to Baseplate (50/60Hz) 2500 Vrms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125 °C Weight (typical) 0.5 oz (14.4 g) Terminals 3/16”x 0.032” input, 1/4”x 0.032” output QC SSR Mounting Screw Torque Range 9.0-10.0 in-lb (1.0-1.13 Nm) LED Input Status Indicator Green Humidity per IEC60068-2-78 93% non-condensing THERMAL DERATE INFORMATION EL240A5x-xxx EL240A10x-xxx 8.0ºC/W 4.0ºC/W 5 10 ps) 4 ps) 8 m m A A nt ( 3 nt ( 6 e e urr 2 urr 4 C C d d a 1 a 2 o o L L 0 00 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) EL240A20x-xxx EL240A30x-xxx 1.5ºC/W 2.0ºC/W 3.0ºC/W 1.5ºC/W 2.0ºC/W 3.0ºC/W 20 30 ps)16 ps)24 m m A A nt (12 nt (18 e e urr 8 urr12 C C d d a 4 a 6 o o L L 00 00 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) EQUIVALENT CIRCUIT BLOCK -DC 4 1 LOAD AC A T Trigger (6) PU Circuit T U O B +DC 3 2 LOAD AC LOAD CAN BE WIRED IN POSITION A or B Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount WIRING DIAGRAMS AC AC V V Load Load 1 ( ) 2 ( ) 1 ( ) 2 ( ) 1 2 1 2 4 3 4 3 4 (–) 3 (+) 4 (–) 3 (+) MOUNTING INSTRUCTIONS Choose one of the two mounting options and follow the instructions. Mounting on Heat Sinks ■ Select adequate heat sink. (Please refer to thermal derating curves for the specific model) ■ Be sure that thermal pad is pre-installed before installing over the heat sink. ■ EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included) to mount the EL onto heat sink (See fig. 1). Recommended screw size is 8-32 (UNC standard) or M4 (metric). ■ Before applying full torque tighten down both screws until they contact the baseplate. Then, tighten them to 9.0-10.0 in-lb (1.0-1.13 Nm). ■ For optimal thermal performance heat sink fins should be oriented vertically to promote natural convection airflow. fig. 1 EL mounted on heat sink Mounting on Panels ■ Locate the panel section on which the EL will be mounted. Panel mount surface must provide adequate heat sinking capability, uncoated, clean, flat (0.004 in/in recommended) and preferably aluminum. ■ Be sure that thermal pad is pre-installed before install over the heatsink. ■ EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included) to mount the EL onto panel. Choose screw length considering the mounting surface hole depth and that the SSR flange thickness is 0.125 in (3.2 mm). ■ Before applying full torque tighten down both screws until they contact the baseplate. Then, tighten them to 10 in-lb (1.13 Nm). Transient Protection Transients are common on AC power lines, and in extreme cases, may pose a risk for the proper operation and reliability of the SSR and its load. The load which the SSR controls may also generate transients itself. Therefore, inclusion of transient protection for the SSR is highly recommended. Internal transient protection is standard in certain Crydom SSR models, and optionally available in others. The user may also install transient protection external to the SSR for additional protection. Contact Crydom technical support for additional information on use of transient protection for AC output SSRs. Important Considerations Be sure to use input and output voltages within operating ranges. LED indicates only input status. It does not represent output status. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Standard Quick Connect terminals 0.187x0.032 0.250x0.032 0.48 0.60 [12.1] [15.2] 0.46 [11.7] 1.00 [02.18.31] -4 1 [25.4] 0.16 0.56 + [4.1] [14.3] 3 0.84 2 0.18 1.44 [22.3] [4.5] [36.6] 1.18 [30.0] Pinout Terminal 1: AC load Terminal 2: AC load Terminal 3: +DC control Terminal 4: -DC control 90° bent Quick Connect terminals 0.61 0.15 1.39 [16.8] [3.8] [35.3] 0.83 0.48 0.74 [21.1] 0.16 [12.1] [18.8] 0.56 [4.1] [14.3] [04.1.58] [13.64.46] [.10.52] [02.18.43] 1.18 [30.0] AGENCY APPROVALS, CONFORMANCES AND EMC E116950 (Except P option) Certification in accordance with: United States Standard for Industrial Control Equipment - UL 508 and Canadian Standard Association for Industrial Control Equipment – C22.2 No. 14. TUV SUD according to IEC 60335-1 and EN 62314:2006 Vibration and Shock Resistance: IEC 61373 : Category 1, Class B. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount Electromagnetic Compatibility Generic Inmunity Tests Test Specification Performance Standard Level Electrostatic Discharge 8kV air discharge Criterion A IEC 61000-4-2 6kV contact discharge Criterion A IEC 61000-6-2 Fast transients (burst) Output 5kHz Criterion B Immunity for IEC 61000-4-4 Input 5kHz Criterion B Industrial Surge 1kV Line to Line Criterion B Environments Output IEC 61000-4-5 2kV Line to Earth Criterion B GENERAL NOTES (1) For option P minimum power factor (at maximum load) is 0.9 (2) In models with built-in overvoltage protection ("P" option), the output will self trigger between 450-600Vpk, not suitable for capacitive loads. (3) All parameters at 25°C unless otherwise specified. (4) When mounted to the proper size heat sink (see derating curves). (5) Turn-on time for Instantaneous turn-on versions is 0.02 msec (6) Elective Overvoltage Protection, “P” option. Rev. 102017 ECN 20340 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: EL240A10-05 EL240A10-12 EL240A10-24 EL240A10R-05 EL240A10R-12 EL240A10R-24 EL240A20-05 EL240A20-12 EL240A20-24 EL240A20R-05 EL240A20R-12 EL240A20R-24 EL240A5-05 EL240A5-12 EL240A5- 24 EL240A5R-05 EL240A5R-12 EL240A5R-24 EL240A30-05 EL240A30R-12N EL240A30-05N EL240A30R-05N EL240A30-05P EL240A30-12NP EL240A30R-12 EL240A30-24NP EL240A30-24P EL240A30R-24N EL240A30-12P EL240A30-12N EL240A30-12 EL240A30-24N EL240A30-24 EL240A30-05NP EL240A30R-05 EL240A30R-24