MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZE KZH Series Lower Z ・Newly innovative electrolyte is employed to minimize impedance KZE ・Endurance with ripple current: 2,000 to 5,000 hours at 105℃ ・Non solvent resistant type Lower Z ・RoHS2 Compliant KY ◆SPECIFICATIONS Items Characteristics Category -40 to +105℃ Temperature Range Rated Voltage Range 6.3 to 100Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Leakage Current I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V (tanδ) tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Low Temperature Z (-25℃) / Z (+20℃) 2max. Characteristics Z (-40℃) / Z (+20℃) 3max. (Max. Impedance Ratio) (at 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 &φ6.3 : 2,000hours φ8 : 3,000hours φ10 : 4,000hours φ12.5 toφ18 : 5,000hours Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal Code : E Sleeve (PET : Brown) dφ 0.5± 0.5± F F D' φ Vent L' 15min 4min (φ5 to φ10) (φ12.5 to φ18) (Except φ5 &φ6.3) Gas escape end seal φD 5 6.3 8 10, 12.5 16, 18 φd 0.5 0.5 0.6 0.6 0.8 F 2.0 2.5 3.5 5.0 7.5 φD' φD+0.5max. L' L+1.5max. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8, 10µF:100, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001T Ver.2 アルミ_英_05-1.indd 168 2019/07/03 15:59:59

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZE Series ◆STANDARD RATINGS Rated Rated Impedance Impedance ripple ripple (Ω max./100kHz) (Ω max./100kHz) WV Cap Case size current WV Cap Case size current Part No. Part No. (Vdc) (µF) φD×L(mm) (mArms/ (Vdc) (µF) φD×L(mm) (mArms/ 20℃ -10℃ 105℃, 20℃ -10℃ 105℃, 100kHz) 100kHz) 150 5×11 0.30 1.0 250 EKZE6R3E□□151ME11D 270 8×20 0.041 0.13 1,250 EKZE350E□□271MH20D 330 6.3×11 0.13 0.41 405 EKZE6R3E□□331MF11D 330 10×16 0.038 0.12 1,430 EKZE350E□□331MJ16S 560 8×11.5 0.072 0.22 760 EKZE6R3E□□561MHB5D 470 10×20 0.023 0.069 1,820 EKZE350E□□471MJ20S 820 8×15 0.056 0.17 995 EKZE6R3E□□821MH15D 560 10×25 0.022 0.066 2,150 EKZE350E□□561MJ25S 1,000 10×12.5 0.053 0.16 1,030 EKZE6R3E□□102MJC5S 680 12.5×20 0.021 0.053 2,360 EKZE350E□□681MK20S 35 1,200 8×20 0.041 0.13 1,250 EKZE6R3E□□122MH20D 1,000 12.5×25 0.018 0.045 2,770 EKZE350E□□102MK25S 1,200 10×16 0.038 0.12 1,430 EKZE6R3E□□122MJ16S 1,200 12.5×30 0.016 0.041 3,290 EKZE350E□□122MK30S 6.3 1,500 10×20 0.023 0.069 1,820 EKZE6R3E□□152MJ20S 1,200 16×20 0.018 0.045 3,140 EKZE350E□□122ML20S 2,200 10×25 0.022 0.066 2,150 EKZE6R3E□□222MJ25S 1,500 12.5×35 0.015 0.039 3,400 EKZE350E□□152MK35S 3,300 12.5×20 0.021 0.053 2,360 EKZE6R3E□□332MK20S 1,800 16×25 0.016 0.043 3,460 EKZE350E□□182ML25S 3,900 12.5×25 0.018 0.045 2,770 EKZE6R3E□□392MK25S 22 5×11 0.34 1.18 238 EKZE500E□□220ME11D 4,700 12.5×30 0.016 0.041 3,290 EKZE6R3E□□472MK30S 56 6.3×11 0.14 0.50 385 EKZE500E□□560MF11D 5,600 12.5×35 0.015 0.039 3,400 EKZE6R3E□□562MK35S 100 8×11.5 0.074 0.22 724 EKZE500E□□101MHB5D 5,600 16×20 0.018 0.045 3,140 EKZE6R3E□□562ML20S 120 8×15 0.061 0.18 950 EKZE500E□□121MH15D 6,800 16×25 0.016 0.043 3,460 EKZE6R3E□□682ML25S 150 10×12.5 0.061 0.18 979 EKZE500E□□151MJC5S 100 5×11 0.30 1.0 250 EKZE100E□□101ME11D 180 8×20 0.046 0.14 1,190 EKZE500E□□181MH20D 220 6.3×11 0.13 0.41 405 EKZE100E□□221MF11D 220 10×16 0.042 0.12 1,370 EKZE500E□□221MJ16S 470 8×11.5 0.072 0.22 760 EKZE100E□□471MHB5D 50 270 10×20 0.030 0.090 1,580 EKZE500E□□271MJ20S 680 8×15 0.056 0.17 995 EKZE100E□□681MH15D 330 10×25 0.028 0.085 1,870 EKZE500E□□331MJ25S 680 10×12.5 0.053 0.16 1,030 EKZE100E□□681MJC5S 470 12.5×20 0.027 0.068 2,050 EKZE500E□□471MK20S 1,000 8×20 0.041 0.13 1,250 EKZE100E□□102MH20D 560 12.5×25 0.023 0.059 2,410 EKZE500E□□561MK25S 1,000 10×16 0.038 0.12 1,430 EKZE100E□□102MJ16S 680 12.5×30 0.021 0.052 2,860 EKZE500E□□681MK30S 10 1,200 10×20 0.023 0.069 1,820 EKZE100E□□122MJ20S 820 12.5×35 0.019 0.051 2,960 EKZE500E□□821MK35S 1,500 10×25 0.022 0.066 2,150 EKZE100E□□152MJ25S 820 16×20 0.023 0.059 2,730 EKZE500E□□821ML20S 2,200 12.5×20 0.021 0.053 2,360 EKZE100E□□222MK20S 1,000 16×25 0.021 0.056 3,010 EKZE500E□□102ML25S 3,300 12.5×25 0.018 0.045 2,770 EKZE100E□□332MK25S 15 5×11 0.88 3.5 165 EKZE630E□□150ME11D 3,900 12.5×30 0.016 0.041 3,290 EKZE100E□□392MK30S 33 6.3×11 0.35 1.4 265 EKZE630E□□330MF11D 3,900 16×20 0.018 0.045 3,140 EKZE100E□□392ML20S 56 8×11.5 0.22 0.88 500 EKZE630E□□560MHB5D 4,700 12.5×35 0.015 0.039 3,400 EKZE100E□□472MK35S 82 8×15 0.16 0.64 665 EKZE630E□□820MH15D 5,600 16×25 0.016 0.043 3,460 EKZE100E□□562ML25S 82 10×12.5 0.11 0.44 690 EKZE630E□□820MJC5S 56 5×11 0.30 1.0 250 EKZE160E□□560ME11D 120 8×20 0.12 0.48 820 EKZE630E□□121MH20D 120 6.3×11 0.13 0.41 405 EKZE160E□□121MF11D 120 10×16 0.076 0.31 950 EKZE630E□□121MJ16S 330 8×11.5 0.072 0.22 760 EKZE160E□□331MHB5D 180 10×20 0.056 0.23 1,150 EKZE630E□□181MJ20S 470 8×15 0.056 0.17 995 EKZE160E□□471MH15D 180 12.5×16 0.072 0.29 1,150 EKZE630E□□181MK16S 470 10×12.5 0.053 0.16 1,030 EKZE160E□□471MJC5S 220 10×25 0.046 0.19 1,350 EKZE630E□□221MJ25S 680 8×20 0.041 0.13 1,250 EKZE160E□□681MH20D 270 12.5×20 0.041 0.13 1,500 EKZE630E□□271MK20S 680 10×16 0.038 0.12 1,430 EKZE160E□□681MJ16S 390 12.5×25 0.031 0.093 1,900 EKZE630E□□391MK25S 16 1,000 10×20 0.023 0.069 1,820 EKZE160E□□102MJ20S 63 470 12.5×30 0.028 0.084 2,300 EKZE630E□□471MK30S 1,200 10×25 0.022 0.066 2,150 EKZE160E□□122MJ25S 470 16×20 0.032 0.096 2,000 EKZE630E□□471ML20S 1,500 12.5×20 0.021 0.053 2,360 EKZE160E□□152MK20S 560 12.5×35 0.024 0.072 2,500 EKZE630E□□561MK35S 2,200 12.5×25 0.018 0.045 2,770 EKZE160E□□222MK25S 680 12.5×40 0.021 0.063 2,800 EKZE630E□□681MK40S 2,700 12.5×30 0.016 0.041 3,290 EKZE160E□□272MK30S 680 16×25 0.025 0.075 2,600 EKZE630E□□681ML25S 2,700 16×20 0.018 0.045 3,140 EKZE160E□□272ML20S 680 18×20 0.030 0.090 2,500 EKZE630E□□681MM20S 3,300 12.5×35 0.015 0.039 3,400 EKZE160E□□332MK35S 820 16×31.5 0.021 0.063 2,850 EKZE630E□□821MLN3S 3,900 16×25 0.016 0.043 3,460 EKZE160E□□392ML25S 820 18×25 0.024 0.072 2,800 EKZE630E□□821MM25S 47 5×11 0.30 1.0 250 EKZE250E□□470ME11D 1,000 16×35.5 0.019 0.057 2,900 EKZE630E□□102MLP1S 100 6.3×11 0.13 0.41 405 EKZE250E□□101MF11D 1,200 16×40 0.018 0.054 3,400 EKZE630E□□122ML40S 220 8×11.5 0.072 0.22 760 EKZE250E□□221MHB5D 1,200 18×31.5 0.020 0.060 3,300 EKZE630E□□122MMN3S 330 8×15 0.056 0.17 995 EKZE250E□□331MH15D 1,500 18×35.5 0.018 0.054 3,400 EKZE630E□□152MMP1S 330 10×12.5 0.053 0.16 1,030 EKZE250E□□331MJC5S 1,800 18×40 0.017 0.051 3,500 EKZE630E□□182MM40S 470 8×20 0.041 0.13 1,250 EKZE250E□□471MH20D 68 10×12.5 0.17 0.66 480 EKZE800E□□680MJC5S 470 10×16 0.038 0.12 1,430 EKZE250E□□471MJ16S 100 10×16 0.11 0.47 600 EKZE800E□□101MJ16S 25 680 10×20 0.023 0.069 1,820 EKZE250E□□681MJ20S 120 10×20 0.084 0.34 800 EKZE800E□□121MJ20S 820 10×25 0.022 0.066 2,150 EKZE250E□□821MJ25S 150 10×25 0.069 0.28 900 EKZE800E□□151MJ25S 1,000 12.5×20 0.021 0.053 2,360 EKZE250E□□102MK20S 150 12.5×16 0.11 0.34 750 EKZE800E□□151MK16S 1,500 12.5×25 0.018 0.045 2,770 EKZE250E□□152MK25S 220 12.5×20 0.062 0.18 1,100 EKZE800E□□221MK20S 1,800 12.5×30 0.016 0.041 3,290 EKZE250E□□182MK30S 330 12.5×25 0.047 0.14 1,250 EKZE800E□□331MK25S 1,800 16×20 0.018 0.045 3,140 EKZE250E□□182ML20S 80 330 16×20 0.048 0.15 1,350 EKZE800E□□331ML20S 2,200 12.5×35 0.015 0.039 3,400 EKZE250E□□222MK35S 390 12.5×30 0.042 0.13 1,500 EKZE800E□□391MK30S 2,700 16×25 0.016 0.043 3,460 EKZE250E□□272ML25S 470 12.5×35 0.036 0.11 1,650 EKZE800E□□471MK35S 33 5×11 0.30 1.0 250 EKZE350E□□330ME11D 470 16×25 0.038 0.12 1,700 EKZE800E□□471ML25S 56 6.3×11 0.13 0.41 405 EKZE350E□□560MF11D 470 18×20 0.045 0.14 1,500 EKZE800E□□471MM20S 35 150 8×11.5 0.072 0.22 760 EKZE350E□□151MHB5D 560 12.5×40 0.032 0.095 1,800 EKZE800E□□561MK40S 220 8×15 0.056 0.17 995 EKZE350E□□221MH15D 680 16×31.5 0.032 0.095 1,850 EKZE800E□□681MLN3S 220 10×12.5 0.053 0.16 1,030 EKZE350E□□221MJC5S 680 18×25 0.036 0.11 1,750 EKZE800E□□681MM25S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001T Ver.2 アルミ_英_05-1.indd 169 2019/07/03 16:00:00

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZE Series ◆STANDARD RATINGS Rated Rated Impedance Impedance ripple ripple (Ω max./100kHz) (Ω max./100kHz) WV Cap Case size current WV Cap Case size current Part No. Part No. (Vdc) (µF) φD×L(mm) (mArms/ (Vdc) (µF) φD×L(mm) (mArms/ 20℃ -10℃ 105℃, 20℃ -10℃ 105℃, 100kHz) 100kHz) 820 16×35.5 0.029 0.086 2,000 EKZE800E□□821MLP1S 150 12.5×20 0.062 0.18 1,100 EKZE101E□□151MK20S 820 18×31.5 0.030 0.090 1,900 EKZE800E□□821MMN3S 220 12.5×25 0.047 0.14 1,250 EKZE101E□□221MK25S 80 1,000 16×40 0.027 0.081 2,200 EKZE800E□□102ML40S 220 16×20 0.048 0.15 1,350 EKZE101E□□221ML20S 1,000 18×35.5 0.027 0.081 2,200 EKZE800E□□102MMP1S 270 12.5×30 0.042 0.13 1,500 EKZE101E□□271MK30S 1,200 18×40 0.026 0.077 2,700 EKZE800E□□122MM40S 330 12.5×35 0.036 0.11 1,650 EKZE101E□□331MK35S 6.8 5×11 1.4 5.6 125 EKZE101E□□6R8ME11D 330 16×25 0.038 0.12 1,700 EKZE101E□□331ML25S 15 6.3×11 0.57 2.3 205 EKZE101E□□150MF11D 330 18×20 0.045 0.14 1,500 EKZE101E□□331MM20S 27 8×11.5 0.36 1.4 355 EKZE101E□□270MHB5D 100 390 12.5×40 0.032 0.095 1,800 EKZE101E□□391MK40S 39 8×15 0.25 1.0 450 EKZE101E□□390MH15D 470 16×31.5 0.032 0.095 1,850 EKZE101E□□471MLN3S 47 10×12.5 0.17 0.66 480 EKZE101E□□470MJC5S 470 18×25 0.036 0.11 1,750 EKZE101E□□471MM25S 100 56 8×20 0.19 0.76 565 EKZE101E□□560MH20D 560 16×35.5 0.029 0.086 2,000 EKZE101E□□561MLP1S 68 10×16 0.11 0.47 600 EKZE101E□□680MJ16S 560 18×31.5 0.030 0.090 1,900 EKZE101E□□561MMN3S 82 10×20 0.084 0.34 800 EKZE101E□□820MJ20S 680 16×40 0.027 0.081 2,200 EKZE101E□□681ML40S 100 12.5×16 0.11 0.34 750 EKZE101E□□101MK16S 680 18×35.5 0.027 0.081 2,200 EKZE101E□□681MMP1S 120 10×25 0.069 0.28 900 EKZE101E□□121MJ25S 820 18×40 0.026 0.077 2,700 EKZE101E□□821MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 120 1k 10k 100k 6.8to180 0.40 0.75 0.90 1.00 220to560 0.50 0.85 0.94 1.00 680to1,800 0.60 0.87 0.95 1.00 2,200to3,900 0.75 0.90 0.95 1.00 4,700to 0.85 0.95 0.98 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001T Ver.2 アルミ_英_05-1.indd 170 2019/07/03 16:00:01