Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FR Type : A Features Country of origin ● Low ESR (Same as FM Series) ● Malaysia ● Endurance : 105 °C 5000 h to 10000 h ● RoHS compliant Attention ● Not applicable for automotive Specifi cations Category temperature range –40 °C to +105 °C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance range 4.7 µF to 8200 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) Leakage current I < 0.01 CV (µA) After 2 minutes V.DC 6.3 10 16 25 35 50 63 100 Dissipation factor tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 (120 Hz/+20 °C) (tan d) Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below. Duration 05×11/ 06.3×11.2 : 5000 hours Endurance 08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours) 08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours 010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized Shelf life at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) Rated voltage (V.DC) Capacitance (µF) 60 120 1 k 10 k 100 k 4.7 to 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 6.3 to 100 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 8200 0.75 0.80 0.95 1.00 1.00 Dimensions 5 Sleeve 0.0 < 08 010 < ± P06re.3s s<ure relief fd + – 5 0. L✽ 14 min. 3 min. 0D±0.5 F± 0D±0.5 ✽ L < 16 : L±1.5 L > 20 : L±2.0 (Unit : mm) 0D 5 6.3 8 10 12.5 16 L — — — — 12.5 to 25 30 to 35 — 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Rated voltage 6.3 V.DC to 35 V.DC 50 V.DC (V.DC) Case size Imped ance Ripple current Imped ance Ripple current (mm) (Ω/100 kHz) (mA r.m.s./100 kHz) (Ω/100 kHz) (mA r.m.s./100 kHz) (0D×L) +20 °C –10 °C +105 °C +20 °C –10 °C +105 °C 5 × 11 0.300 1.000 280 0.340 1.130 250 6.3 × 11.2 0.130 0.430 455 0.140 0.460 405 8 × 11.5 0.056 0.168 950 0.061 0.183 870 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.043 0.114 1290 0.042 0.126 1170 10 × 16 0.028 0.078 1790 0.030 0.090 1650 10 × 20 0.020 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 0.022 0.055 2260 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 Rated voltage 63 V.DC (V.DC) Case size Imped ance Ripple current (mm) (Ω/100 kHz) (mA r.m.s./100 kHz) (0D×L) +20 °C –10 °C +105 °C 5 × 11 0.510 2.040 175 6.3 × 11.2 0.210 0.840 284 8 × 11.5 0.092 0.368 566 8 × 15 0.068 0.272 741 8 × 20 0.050 0.200 930 10 × 12.5 0.063 0.252 761 10 × 16 0.045 0.180 1073 10 × 20 0.035 0.140 1229 10 × 25 0.033 0.132 1500 12.5 × 20 0.033 0.125 1582 12.5 × 25 0.027 0.092 1995 12.5 × 30 0.024 0.082 2528 12.5 × 35 0.021 0.071 2780 16 × 20 0.029 0.093 2153 16 × 25 0.024 0.074 2988 Rated voltage 100 V.DC (V.DC) Case size Imped ance Ripple current (mm) (Ω/100 kHz) (mA r.m.s./100 kHz) (0D×L) +20 °C –10 °C +105 °C 10 × 20 0.084 0.336 1500 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Specifi cation Lead length (mm) Min. Packaging Q'ty Rated Cap. Ripple Impedance Lead space (vVo.ltDagCe) (±(2µ0F %)) 0D L ((1+c01u00r 5rke H°nCzt))((1+02(00Ω k)°HCz))E(nhdouurarnsc)e Lde0idaad. Straight Ta✽pBing Ta✽pHing Part No. S(ltepraacidgssh)tT(appcins)g (mA r.m.s.) 150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR0J151( ) 200 2000 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J221( ) 200 2000 330 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J331( ) 200 2000 470 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J471( ) 200 2000 820 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J821( ) 200 1000 1000 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J102( ) 200 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR0J122L( ) 200 1000 1200 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR0J122( ) 200 500 1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR0J152L( ) 200 1000 6.3 1800 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR0J182( ) 200 500 2200 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR0J222( ) 200 500 2700 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J272L( ) 200 500 3300 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J332L( ) 200 500 3900 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR0J392( ) 200 500 4700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR0J472( ) 200 500 5600 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR0J562L 100 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR0J682L 100 6800 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR0J682S( ) 100 250 8200 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR0J822( ) 100 250 100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A101( ) 200 2000 150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A151( ) 200 2000 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1A221( ) 200 2000 270 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1A271( ) 200 2000 470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A471( ) 200 1000 680 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A681( ) 200 1000 820 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1A821( ) 200 500 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A102( ) 200 500 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1A102L( ) 200 1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1A152L( ) 200 1000 10 1500 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A152( ) 200 500 1800 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1A182( ) 200 500 2200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1A222L( ) 200 500 3300 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1A332( ) 200 500 3900 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1A392( ) 200 500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1A472L 100 4700 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1A472S( ) 100 250 5600 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A562L 100 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A682L 100 6800 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1A682( ) 100 250 · When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Specifi cation Lead length (mm) Min. Packaging Q'ty Rated Cap. Ripple Impedance Lead space (vVo.ltDagCe) (±(2µ0F %)) 0D L ((1+c01u00r 5rke H°nCzt))((1+02(00Ω k)°HCz))E(nhdouurarnsc)e Lde0idaad. Straight Ta✽pBing Ta✽pHing Part No. S(ltepraacidgssh)tT(appcins)g (mA r.m.s.) 68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C680( ) 200 2000 100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C101( ) 200 2000 120 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C121( ) 200 2000 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C221( ) 200 2000 470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1C471( ) 200 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1C681L( ) 200 1000 680 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1C681( ) 200 500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1C102L( ) 200 1000 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1C102( ) 200 500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1C152( ) 200 500 1500 16 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C152L( ) 200 500 1800 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C182L( ) 200 500 2200 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1C222( ) 200 500 2700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1C272( ) 200 500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1C332L 100 3300 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C332S( ) 100 250 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C392L 100 3900 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C392S( ) 100 250 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C472L 100 4700 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C472( ) 100 250 5600 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C562( ) 100 250 47 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E470( ) 200 2000 68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E680( ) 200 2000 100 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E101( ) 200 2000 150 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E151( ) 200 2000 220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E221( ) 200 1000 330 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E331( ) 200 1000 390 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E391L( ) 200 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E471Y( ) 200 1000 470 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E471L( ) 200 1000 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1E471( ) 200 500 560 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E561L( ) 200 1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E681L( ) 200 1000 680 25 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1E681( ) 200 500 820 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E821( ) 200 500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E102( ) 200 500 1000 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E102L( ) 200 500 1200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E122L( ) 200 500 1500 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1E152( ) 200 500 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1E182( ) 200 500 1800 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E182S( ) 100 250 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1E222L 100 2200 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E222S( ) 100 250 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1E272L 100 2700 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E272S( ) 100 250 3300 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1E332( ) 100 250 · When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Specifi cation Lead length (mm) Min. Packaging Q'ty Rated Cap. Ripple Impedance Lead space (vVo.ltDagCe) (±(2µ0F %)) 0D L ((1+c01u00r 5rke H°nCzt))((1+02(00Ω k)°HCz))E(nhdouurarnsc)e Lde0idaad. Straight Ta✽pBing Ta✽pHing Part No. S(ltepraacidgssh)tT(appcins)g (mA r.m.s.) 33 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1V330( ) 200 2000 68 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1V680( ) 200 2000 100 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V101( ) 200 1000 180 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V181( ) 200 1000 220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V221( ) 200 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1V271L( ) 200 1000 270 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1V271( ) 200 500 330 10 12.5 1330 0.043 5000 0.6 5.0 5.0 EEUFR1V331U( ) 200 500 390 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V391L( ) 200 1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V471L( ) 200 1000 470 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1V471( ) 200 500 35 560 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V561( ) 200 500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V681( ) 200 500 680 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V681L( ) 200 500 820 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V821L( ) 200 500 1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1V102( ) 200 500 1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1V122( ) 200 500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1V152L 100 1500 16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1V152S( ) 100 250 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V182L 100 1800 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1V182( ) 100 250 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V222L 100 2200 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1V222( ) 100 250 4.7 5 11 185 0.620 5000 0.5 2.0 5.0 2.5 EEUFR1H4R7( ) 200 2000 10 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H100( ) 200 2000 22 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H220( ) 200 2000 47 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 EEUFR1H470( ) 200 2000 56 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 2.5 EEUFR1H560( ) 200 2000 100 8 11.5 870 0.061 6000 0.6 3.5 5.0 EEUFR1H101( ) 200 1000 120 8 15 1140 0.045 8000 0.6 3.5 5.0 EEUFR1H121L( ) 200 1000 150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 EEUFR1H151( ) 200 500 50 180 8 20 1430 0.033 9000 0.6 3.5 5.0 EEUFR1H181L( ) 200 1000 220 10 16 1650 0.030 8000 0.6 5.0 5.0 EEUFR1H221( ) 200 500 270 10 20 1890 0.023 10000 0.6 5.0 5.0 EEUFR1H271( ) 200 500 330 10 25 2150 0.022 10000 0.6 5.0 5.0 EEUFR1H331L( ) 200 500 470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 EEUFR1H471( ) 200 500 560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 EEUFR1H561( ) 200 500 680 12.5 30 3160 0.016 10000 0.8 5.0 EEUFR1H681L 100 12.5 35 3270 0.014 10000 0.8 5.0 EEUFR1H821L 100 820 16 20 2870 0.019 10000 0.8 7.5 7.5 EEUFR1H821S( ) 100 250 1000 16 25 3320 0.016 10000 0.8 7.5 7.5 EEUFR1H102( ) 100 250 18 5 11 175 0.510 5000 0.5 2.0 5.0 2.5 EEUFR1J180( ) 200 2000 47 6.3 11.2 284 0.210 5000 0.5 2.5 5.0 2.5 EEUFR1J470( ) 200 2000 82 8 11.5 566 0.092 6000 0.6 3.5 5.0 EEUFR1J820( ) 200 1000 8 15 741 0.068 8000 0.6 3.5 5.0 EEUFR1J101L( ) 200 1000 100 10 12.5 761 0.063 6000 0.6 5.0 5.0 EEUFR1J101( ) 200 500 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J121L( ) 200 1000 120 10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J121( ) 200 500 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J151L( ) 200 1000 150 10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J151( ) 200 500 180 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J181( ) 200 500 63 220 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J221L( ) 200 500 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J271U( ) 200 500 270 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J271L( ) 200 500 12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J271( ) 200 500 330 12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J331( ) 200 500 390 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J391( ) 200 500 470 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J471( ) 200 500 12.5 30 2528 0.024 10000 0.8 5.0 EEUFR1J561L 100 560 16 20 2153 0.029 10000 0.8 7.5 7.5 EEUFR1J561S( ) 100 250 680 12.5 35 2780 0.021 10000 0.8 5.0 EEUFR1J681L 100 820 16 25 2988 0.024 10000 0.8 7.5 7.5 EEUFR1J821( ) 100 250 100 100 10 20 1500 0.084 10000 0.6 5.0 5.0 EEUFR2A101( ) 200 500 · When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Mar. 2016