Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FM Type : A Features ● Low impedance (40 % to 70 % less than FC Series) ● Endurance : 105 °C 2000 h to 7000 h ● RoHS compliant Attention ● Not applicable for automotive Specifi cations Category temperature range –40 °C to +105 °C Rated voltage range 6.3 V.DC to 50 V.DC Capacitance range 22 µF to 6800 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) Leakage current I < 0.01 CV (µA) After 2 minutes V.DC 6.3 10 16 25 35 50 Dissipation factor (max.) (120 Hz/+20 °C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 (tan d) Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below. Duration 05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours Endurance 08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20 : 5000 hours 012.5×25 to 012.5×35/ 016×25 : 7000 hours Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized Shelf life at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) Rated voltage (V.DC) Capacitance (µF) 60 120 1 k 10 k 100 k 22 to 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 6.3 to 50 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 6800 0.75 0.80 0.95 1.00 1.00 Dimensions 5 Sleeve 0.0 < 08 010 < ± P06re.3s s<ure relief fd + – 5 0. L✽ 14 min. 3 min. 0D±0.5 F± 0D±0.5 ✽ L < 16 : L±1.5 L > 20 : L±2.0 (Unit : mm) 0D 5 6.3 8 10 12.5 16 L — — — — 12.5 to 25 30 to 40 — 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Rated voltage 6.3 V.DC to 35 V.DC 50 V.DC (V.DC) Case size Imped ance Ripple current Imped ance Ripple current (mm) (Ω/100 kHz) (mA r.m.s./100 kHz) (Ω/100 kHz) (mA r.m.s./100 kHz) (0D×L) +20 °C –10 °C +105 °C +20 °C –10 °C +105 °C 5 × 11 0.300 1.000 280 0.340 1.130 250 6.3 × 11.2 0.130 0.430 455 0.140 0.460 405 8 × 11.5 0.056 0.168 950 0.061 0.183 870 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.038 0.114 1290 0.042 0.126 1170 10 × 16 0.026 0.078 1790 0.030 0.090 1650 10 × 20 0.019 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 0.022 0.055 2260 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Specifi cation Lead length (mm) Min. Packaging Q'ty Rated Cap. Ripple Impedance Lead space (vVo.ltDagCe) (±(2µ0F %)) 0D L ((1+c01u00r 5rke H°nCzt))((1+02(00Ω k)°HCz))E(hndouurarnsce) Lde0idaad. Straight Ta✽pBing Ta✽pHing Part No. L(lpeocansdg) T(appcins)g (mA r.m.s.) 150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM0J151( ) 200 2000 330 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM0J331( ) 200 2000 560 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J561( ) 200 1000 820 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM0J821L( ) 200 1000 1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102( ) 200 500 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM0J122L( ) 200 1000 1200 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122( ) 200 500 6.3 1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152( ) 200 500 2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L( ) 200 500 3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332( ) 200 500 3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM0J392( ) 200 500 4700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM0J472L 100 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM0J562L 100 5600 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM0J562S( ) 100 250 6800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM0J682( ) 100 250 100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1A101( ) 200 2000 220 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1A221( ) 200 2000 470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1A471( ) 200 1000 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1A681L( ) 200 1000 680 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681( ) 200 500 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1A102L( ) 200 1000 1000 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102( ) 200 500 10 1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122( ) 200 500 1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L( ) 200 500 2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222( ) 200 500 3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332( ) 200 500 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1A392L 100 3900 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1A392S( ) 100 250 4700 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1A472L 100 5600 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1A562( ) 100 250 68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1C680( ) 200 2000 120 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1C121( ) 200 2000 330 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1C331( ) 200 1000 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1C471L( ) 200 1000 470 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1C471( ) 200 500 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1C681L( ) 200 1000 680 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1C681( ) 200 500 16 1000 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1C102( ) 200 500 1200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1C122L( ) 200 500 1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1C152( ) 200 500 2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1C222( ) 200 500 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1C272L 100 2700 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1C272S( ) 100 250 3300 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1C332L 100 3900 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1C392( ) 100 250 · When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016

Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Specifi cation Lead length (mm) Min. Packaging Q'ty Rated Cap. Ripple Impedance Lead space (vVo.ltDagCe) (±(2µ0F %)) 0D L ((1+c01u00r 5rke H°nCzt))((1+02(00Ω k)°HCz))E(hndouurarnsce) Lde0idaad. Straight Ta✽pBing Ta✽pHing Part No. L(lpeocansdg) T(appcins)g (mA r.m.s.) 47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1E470( ) 200 2000 100 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101( ) 200 2000 220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221( ) 200 1000 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1E331L( ) 200 1000 330 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331( ) 200 500 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1E471L( ) 200 1000 470 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471( ) 200 500 25 680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681( ) 200 500 820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L( ) 200 500 1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102( ) 200 500 1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152( ) 200 500 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1E182L 100 1800 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1E182S( ) 100 250 2200 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1E222L 100 2700 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1E272( ) 100 250 33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1V330( ) 200 2000 68 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1V680( ) 200 2000 150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151( ) 200 1000 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1V221L( ) 200 1000 220 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221( ) 200 500 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1V331L( ) 200 1000 330 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331( ) 200 500 35 470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471( ) 200 500 560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L( ) 200 500 680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681( ) 200 500 1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102( ) 200 500 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1V122L 100 1200 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S( ) 100 250 1500 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1V152L 100 1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182( ) 100 250 22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220( ) 200 2000 56 6.3 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 EEUFM1H560( ) 200 2000 100 8 11.5 870 0.061 3000 0.6 3.5 5.0 EEUFM1H101( ) 200 1000 120 8 15 1140 0.045 3000 0.6 3.5 5.0 EEUFM1H121L( ) 200 1000 150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 EEUFM1H151( ) 200 500 180 8 20 1430 0.033 4000 0.6 3.5 5.0 EEUFM1H181L( ) 200 1000 220 10 16 1650 0.030 4000 0.6 5.0 5.0 EEUFM1H221( ) 200 500 50 270 10 20 1890 0.023 5000 0.6 5.0 5.0 EEUFM1H271( ) 200 500 330 10 25 2150 0.022 5000 0.6 5.0 5.0 EEUFM1H331L( ) 200 500 470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 EEUFM1H471( ) 200 500 560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 EEUFM1H561( ) 200 500 680 12.5 30 3160 0.016 7000 0.8 5.0 EEUFM1H681L 100 12.5 35 3270 0.014 7000 0.8 5.0 EEUFM1H821L 100 820 16 20 2870 0.019 5000 0.8 7.5 7.5 EEUFM1H821S( ) 100 250 1000 16 25 3320 0.016 7000 0.8 7.5 7.5 EEUFM1H102( ) 100 250 · When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016