Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZA Type: V High temperature lead-free reflow Features ● Endurance : 10000 h at 105 °C ● Low ESR and high ripple current (70 % over, Lower ESR than current V-FP) ● High voltage (to 80 V.DC) ● Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of φ6.3 product. (φ6.3, φ8, φ10) ● AEC-Q200 compliant ● RoHS compliant Specifications Size code C D D8 F G Category temp. range –55 ℃ to +105 ℃ Rated voltage range 25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC Nominal cap.range 10 μF to 33 μF 10 μF to 56 μF 22 μF to 100 μF 22 μF to 220 μF 33 μF to 330 μF Capacitance tolerance ±20 % (120 Hz / +20 ℃) DC leakage current I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +105 °C ± 2 °C, 10000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω / 100 kHz)(-40 ℃） 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 °C ± 2 °C with no voltage applied and then being Shelf life stabilized at +20 °C,　capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) 0.3 max. A±0.2 ） Example : 25 V.DC 33 μF – K （I Marking color : BLACK Negative polarity marking (–) ±0.5 H 0.2 P） Capacitance (μF) D ± （ φ B 33 + E ZA Series identification L W I） （ Pressure relief (φ10 and larger) Rated voltage mark ( )Reference size Unit：mm Size code φD L A,B H I W P K Lot number C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +-00..2105 RatedE voltage ma2r5k J Un6it3：V.DC DD8 66..33 57..87±±00..33 66..66 77..88 mmaaxx.. 22..66 00..6655±±00..11 11..88 00..3355 ++--0000....22110055 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 V 35 K 80 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H 50 ·The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05-Dec-18

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Characteristics list Endurance : 105 ℃ 10000 h Case size Min.packaging Specification Part number (mm) q'ty Capaci- Rated tance Size Ripple v(oVl.tDaCg)e (±20 %) φD L code current *1 ESR*2 tan δ*3 Standard Vibration-proof Taping (μF) (mΩ) Product product (pcs) (mA r.m.s.) 33 5.0 5.8 C 900 80 0.14 EEHZA1E330R – 1000 56 6.3 5.8 D 1300 50 0.14 EEHZA1E560P EEHZA1E560V 1000 25 100 6.3 7.7 D8 2000 30 0.14 EEHZA1E101XP EEHZA1E101XV 900 220 8.0 10.2 F 2300 27 0.14 EEHZA1E221P EEHZA1E221V 500 330 10.0 10.2 G 2500 20 0.14 EEHZA1E331P EEHZA1E331V 500 22 5.0 5.8 C 900 100 0.12 EEHZA1V220R – 1000 27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P EEHZA1V270V 1000 47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P EEHZA1V470V 1000 35 68 6.3 7.7 D8 2000 35 0.12 EEHZA1V680XP EEHZA1V680XV 900 150 8.0 10.2 F 2300 27 0.12 EEHZA1V151P EEHZA1V151V 500 270 10.0 10.2 G 2500 20 0.12 EEHZA1V271P EEHZA1V271V 500 10 5.0 5.8 C 750 120 0.10 EEHZA1H100R – 1000 22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P EEHZA1H220V 1000 50 33 6.3 7.7 D8 1600 40 0.10 EEHZA1H330XP EEHZA1H330XV 900 68 8.0 10.2 F 1800 30 0.10 EEHZA1H680P EEHZA1H680V 500 100 10.0 10.2 G 2000 28 0.10 EEHZA1H101P EEHZA1H101V 500 10 6.3 5.8 D 1000 120 0.08 EEHZA1J100P EEHZA1J100V 1000 22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP EEHZA1J220XV 900 63 33 8.0 10.2 F 1700 40 0.08 EEHZA1J330P EEHZA1J330V 500 56 10.0 10.2 G 1800 30 0.08 EEHZA1J560P EEHZA1J560V 500 22 8.0 10.2 F 1550 45 0.08 EEHZA1K220P EEHZA1K220V 500 80 33 10.0 10.2 G 1700 36 0.08 EEHZA1K330P EEHZA1K330V 500 *1: Ripple current (100 kHz　/ +105 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) ・ Please refer to the page of “Reflow profile” and “The taping dimensions”. ・ The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitance（C）Frequency (f) 100Hz ≦ f＜ 200Hz 200Hz ≦ f＜ 300Hz 300Hz ≦ f＜ 500Hz 500Hz ≦ f＜ 1kHz C ＜ 47μF 0.10 0.10 0.15 0.20 Correction 47μF ≦ C ＜ 150μF 0.15 0.20 0.25 0.30 factor 150μF ≦ C 0.15 0.25 0.25 0.30 Rated capacitance（C）Frequency (f) 1kHz ≦ f＜ 2kHz 2kHz ≦ f＜ 3kHz 3kHz ≦ f＜ 5kHz 5kHz ≦ f＜ 10kHz C ＜ 47μF 0.30 0.40 0.45 0.50 Correction 47μF ≦ C ＜ 150μF 0.40 0.45 0.55 0.60 factor 150μF ≦ C 0.45 0.50 0.60 0.65 Rated capacitance（C）Frequency (f) 10kHz ≦ f＜ 15kHz 15kHz ≦ f＜ 20kHz 20kHz ≦ f＜ 30kHz 30kHz ≦ f＜ 40kHz C ＜ 47μF 0.60 0.65 0.70 0.75 Correction 47μF ≦ C ＜ 150μF 0.70 0.75 0.80 0.80 factor 150μF ≦ C 0.75 0.80 0.85 0.85 Rated capacitance（C）Frequency (f) 40kHz ≦ f＜ 50kHz 50kHz ≦ f＜ 100kHz 100kHz ≦ f＜ 500kHz 500kHz ≦ f C ＜ 47μF 0.80 0.85 1.00 1.05 Correction 47μF ≦ C ＜ 150μF 0.85 0.90 1.00 1.00 factor 150μF ≦ C 0.85 0.90 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05-Dec-18