Aluminum Electrolytic Capacitors/ S Surface Mount Type S V Series: Type: ■ Features ● Endurance: 85 °C 2000 h ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS directive compliant ■ Specifi cations Category Temp. Range –40 °C to +85 °C Rated W.V. Range 4 V.DC to 100 V.DC Nominal Cap. Range 1 μF to 1500 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Curr ent I < 0.01 CV or 3 (μA) (Bi-Polar I < 0.02 CV or 6 (μA) After 2 minutes (Whichever is greater) tan d Please see the attached standard products list W.V. (V) 4 6.3 10 16 25 35 50 63 100 Characteristics Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 3 3 (Impedance ratio at 120 Hz) at Low Temperature Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 4 4 After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at +85 °C ±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ±20 % of inisial measured value Size code Rated W.V. Cap. change A(03) 4 W.V to 50 W.V Endurance Capacitance change B(04) to D, D8(06.3) 4 W.V 1000 hours ±30 % 6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 % tan d < 200 % initial specifi ed value DC leakege current < initial specifi ed value After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf Life capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change ±10 % of initial measured value Soldering Heat tan d < initial specifi ed value DC leakage current < initial specifi ed value ■ Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1 k 10 k to Correction factor 0.70 1.00 1.30 1.70 ■ ■ Marking Dimensions in mm (not to scale) (Unit : mm) Example:4V 33 μF (Polarized) 0.3 max. A±0.2 Marking color: BLACK – K(I) ±0.5 H ±0.2 P) Negative polarity marking (–) 0D B ( (No marking for the bi-polar) + Capacitance (μF) L W (I) Pressure Relief (010 and larger) ( ) Reference size (cid:20)(cid:20) Series indentification (S) or (A) (cid:21)(cid:52) (A size=Lot number) Size D L A, B H I W P K code Mark for Lead-Free A 3.0 5.4+ - 00..12 3.3 4.5 max. 1.5 0.55±0.1 0.6 0.35 +- 00..2105 PBrlaocdku cDtsot (Square) B 4.0 5.4+ - 00..21 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 +- 00..2105 C 5.0 5.4+ - 00..12 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 00..2105 Rated voltage Mark (V.DC) D 6.3 5.4+ - 00..12 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 00..2105 (6=6.3 V.DC) Lot number D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 00..2105 (No marking=A size) E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 +- 00..2105 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20 Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-9 –

Aluminum Electrolytic Capacitors/ S ■ Standard Prod ucts Min. Case size Specifi cation Packaging Q'ty Cap. Ripple tan d W.V. Part No. (±20 %) ✽Size Current Refl ow Dia. Length End ur ance (RoHS:compliant) Taping Code (120 Hz) (120 Hz) (+85 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (pcs) 22 3 5.4 A 19 0.37 1000 EEE0GS220SR ✽✽ (1) 2000 33 4 5.4 B 26 0.35 1000 EEE0GA330SR (1) 2000 47 4 5.4 B 34 0.35 1000 EEE0GA470SR (1) 2000 4 100 5 5.4 C 61 0.35 1000 EEE0GA101SR (1) 1000 220 6.3 5.4 D 82 0.35 1000 EEE0GA221SP (1) 1000 330 6.3 5.4 (D) 80 0.50 1000 EEE0GA331WP (1) 1000 470 6.3 7.7 D8 200 0.35 1000 EEE0GA471XP (1) 900 3 5.4 (A) 20 0.35 1000 EEE0JS220WR ✽✽ (1) 2000 22 4 5.4 B 29 0.26 2000 EEE0JA220SR (1) 2000 33 4 5.4 (B) 22 0.35 1000 EEE0JA330WR (1) 2000 4 5.4 (B) 36 0.35 1000 EEE0JA470WR (1) 2000 47 5 5.4 C 46 0.26 2000 EEE0JA470SR (1) 1000 5 5.4 (C) 47 0.35 1000 EEE0JA101WR (1) 1000 100 6.3 5.4 D 71 0.26 2000 EEE0JA101SP (1) 1000 6.3 220 6.3 5.4 (D) 74 0.35 1000 EEE0JA221WP (1) 1000 6.3 7.7 D8 188 0.26 2000 EEE0JA331XP (1) 900 330 8 6.2 E 300 0.35 2000 EEE0JA331P (2) 1000 470 8 10.2 F 380 0.35 2000 EEE0JA471P (2) 500 8 10.2 (F) 500 0.35 2000 EEE0JA102UP (2) 500 1000 10 10.2 G 700 0.35 2000 EEE0JA102P (2) 500 1500 10 10.2 G 750 0.35 2000 EEE0JA152P (2) 500 22 4 5.4 (B) 28 0.30 1000 EEE1AA220WR (1) 2000 4 5.4 (B) 29 0.30 1000 EEE1AA330WR (1) 2000 33 5 5.4 C 43 0.20 2000 EEE1AA330SR (1) 1000 47 5 5.4 (C) 43 0.30 1000 EEE1AA470WR (1) 1000 5 5.4 (C) 50 0.30 1000 EEE1AA101WR (1) 1000 100 6.3 5.4 D 70 0.26 2000 EEE1AA101SP (1) 1000 10 6.3 7.7 D8 173 0.20 2000 EEE1AA221XP (1) 900 220 8 6.2 E 250 0.26 2000 EEE1AA221P (2) 1000 330 8 10.2 F 390 0.26 2000 EEE1AA331P (2) 500 8 10.2 (F) 390 0.26 2000 EEE1AA471UP (2) 500 470 10 10.2 G 400 0.26 2000 EEE1AA471P (2) 500 1000 10 10.2 G 580 0.26 2000 EEE1AA102P (2) 500 3 5.4 A 20 0.18 1000 EEE1CS100SR ✽✽ (1) 2000 10 4 5.4 B 28 0.16 2000 EEE1CA100SR (1) 2000 4 5.4 (B) 28 0.26 1000 EEE1CA220WR (1) 2000 22 5 5.4 C 39 0.16 2000 EEE1CA220SR (1) 1000 33 5 5.4 (C) 35 0.26 1000 EEE1CA330WR (1) 1000 5 5.4 (C) 39 0.26 1000 EEE1CA470WR (1) 1000 47 6.3 5.4 D 70 0.16 2000 EEE1CA470SP (1) 1000 16 6.3 5.4 (D) 70 0.26 1000 EEE1CA101WP (1) 1000 100 8 6.2 E 200 0.20 2000 EEE1CA101P (2) 1000 6.3 7.7 D8 162 0.16 2000 EEE1CA221XP (1) 900 220 8 10.2 F 280 0.20 2000 EEE1CA221P (2) 500 8 10.2 (F) 320 0.20 2000 EEE1CA331UP (2) 500 330 10 10.2 G 380 0.20 2000 EEE1CA331P (2) 500 8 10.2 (F) 350 0.20 2000 EEE1CA471UP (2) 500 470 10 10.2 G 420 0.20 2000 EEE1CA471P (2) 500 ✽ Size code( ):Miniaturization product ✽✽ Please kindly accept last shipment : 31/Mar/2014 · Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-10 –

Aluminum Electrolytic Capacitors/ S ■ Standard Prod ucts Min. Case size Specifi cation Packaging Q'ty Cap. Ripple tan d W.V. Part No. (±20 %) ✽Size Current Refl ow Dia. Length End ur ance (RoHS:compliant) Taping Code (120 Hz) (120 Hz) (+85 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (pcs) 3 5.4 A 12 0.16 1000 EEE1ES4R7SR ✽✽ (1) 2000 4.7 4 5.4 B 22 0.14 2000 EEE1EA4R7SR (1) 2000 4 5.4 (B) 22 0.20 1000 EEE1EA100WR (1) 2000 10 5 5.4 C 28 0.14 2000 EEE1EA100SR (1) 1000 5 5.4 (C) 35 0.20 1000 EEE1EA220WR (1) 1000 22 6.3 5.4 D 55 0.14 2000 EEE1EA220SP (1) 1000 5 5.4 (C) 42 0.20 1000 EEE1EA330WR (1) 1000 33 6.3 5.4 D 65 0.14 2000 EEE1EA330SP (1) 1000 25 47 6.3 5.4 (D) 70 0.20 1000 EEE1EA470WP (1) 1000 6.3 7.7 D8 143 0.14 2000 EEE1EA101XP (1) 900 100 8 6.2 (E) 91 0.16 2000 EEE1EA101UP (2) 1000 8 10.2 F 180 0.16 2000 EEE1EA101P (2) 500 8 10.2 (F) 230 0.16 2000 EEE1EA221UP (2) 500 220 10.0 10.2 G 310 0.16 2000 EEE1EA221P (2) 500 8 10.2 (F) 270 0.16 2000 EEE1EA331UP (2) 500 330 10 10.2 G 340 0.16 2000 EEE1EA331P (2) 500 470 10 10.2 G 380 0.16 2000 EEE1EA471P (2) 500 2.2 3 5.4 A 8 0.14 1000 EEE1VS2R2SR ✽✽ (1) 2000 3.3 3 5.4 A 10 0.14 1000 EEE1VS3R3SR ✽✽ (1) 2000 4.7 4 5.4 B 22 0.12 2000 EEE1VA4R7SR (1) 2000 4 5.4 (B) 22 0.16 1000 EEE1VA100WR (1) 2000 10 5 5.4 C 30 0.12 2000 EEE1VA100SR (1) 1000 5 5.4 (C) 36 0.16 1000 EEE1VA220WR (1) 1000 22 6.3 5.4 D 60 0.12 2000 EEE1VA220SP (1) 1000 6.3 5.4 (D) 60 0.16 1000 EEE1VA330WP (1) 1000 33 35 8 6.2 E 130 0.14 2000 EEE1VA330P (2) 1000 6.3 5.4 (D) 70 0.16 1000 EEE1VA470WP (1) 1000 47 8 6.2 E 165 0.14 2000 EEE1VA470P (2) 1000 6.3 7.7 D8 132 0.12 2000 EEE1VA101XP (1) 900 100 8 10.2 (F) 140 0.14 2000 EEE1VA101UP (2) 500 10 10.2 G 210 0.14 2000 EEE1VA101P (2) 500 8 10.2 (F) 200 0.14 2000 EEE1VA221UP (2) 500 220 10 10.2 G 310 0.14 2000 EEE1VA221P (2) 500 330 10 10.2 G 350 0.14 2000 EEE1VA331P (2) 500 ✽ Size code( ):Miniaturization product ✽✽ Please kindly accept last shipment : 31/Mar/2014 · Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-11 –

Aluminum Electrolytic Capacitors/ S ■ Standard Prod ucts Min. Case size Specifi cation Packaging Q'ty Cap. Ripple tan d W.V. Part No. (±20 %) ✽Size Current Refl ow Dia. Length End ur ance (RoHS:compliant) Taping Code (120 Hz) (120 Hz) (+85 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (pcs) 3 5.4 A 1 0.14 1000 EEE1HS0R1SR ✽✽ (1) 2000 0.1 4 5.4 B 1 0.12 2000 EEE1HA0R1SR ✽✽✽ (1) 2000 3 5.4 A 2 0.14 1000 EEE1HSR22SR ✽✽ (1) 2000 0.22 4 5.4 B 2 0.12 2000 EEE1HAR22SR ✽✽✽ (1) 2000 3 5.4 A 3 0.14 1000 EEE1HSR33SR ✽✽ (1) 2000 0.33 4 5.4 B 3 0.12 2000 EEE1HAR33SR ✽✽✽ (1) 2000 3 5.4 A 5 0.14 1000 EEE1HSR47SR ✽✽ (1) 2000 0.47 4 5.4 B 5 0.12 2000 EEE1HAR47SR ✽✽✽ (1) 2000 3 5.4 A 8 0.14 1000 EEE1HS010SR ✽✽ (1) 2000 1 4 5.4 B 10 0.12 2000 EEE1HA010SR ✽✽✽ (1) 2000 3 5.4 A 8 0.14 1000 EEE1HS2R2SR ✽✽ (1) 2000 2.2 4 5.4 B 16 0.12 2000 EEE1HA2R2SR (1) 2000 3.3 4 5.4 B 16 0.12 2000 EEE1HA3R3SR (1) 2000 4 5.4 (B) 18 0.14 1000 EEE1HA4R7WR (1) 2000 50 4.7 5 5.4 C 23 0.12 2000 EEE1HA4R7SR (1) 1000 5 5.4 (C) 27 0.14 1000 EEE1HA100WR (1) 1000 10 6.3 5.4 D 35 0.12 2000 EEE1HA100SP (1) 1000 6.3 5.4 (D) 40 0.14 1000 EEE1HA220WP (1) 1000 22 8 6.2 E 120 0.12 2000 EEE1HA220P (2) 1000 6.3 7.7 D8 85 0.12 2000 EEE1HA330XP (1) 900 33 8 6.2 (E) 65 0.12 2000 EEE1HA330UP (2) 1000 8 10.2 F 110 0.12 2000 EEE1HA330P (2) 500 6.3 7.7 D8 105 0.12 2000 EEE1HA470XP (1) 900 47 8 10.2 (F) 110 0.12 2000 EEE1HA470UP (2) 500 10 10.2 G 130 0.12 2000 EEE1HA470P (2) 500 8 10.2 (F) 200 0.12 2000 EEE1HA101UP (2) 500 100 10 10.2 G 250 0.12 2000 EEE1HA101P (2) 500 220 10 10.2 G 300 0.12 2000 EEE1HA221P (2) 500 8 6.2 (E) 40 0.18 2000 EEE1JA220UP (2) 1000 22 8 10.2 F 40 0.18 2000 EEE1JA220P (2) 500 33 8 10.2 F 45 0.18 2000 EEE1JA330P (2) 500 63 8 10.2 (F) 45 0.18 2000 EEE1JA470UP (2) 500 47 10 10.2 G 45 0.18 2000 EEE1JA470P (2) 500 100 10 10.2 G 60 0.18 2000 EEE1JA101P (2) 500 3.3 8 6.2 E 50 0.18 2000 EEE2AA3R3P (2) 1000 4.7 8 6.2 (E) 50 0.18 2000 EEE2AA4R7UP (2) 1000 8 6.2 (E) 50 0.18 2000 EEE2AA100UP (2) 1000 10 100 8 10.2 F 85 0.18 2000 EEE2AA100P (2) 500 8 10.2 (F) 55 0.18 2000 EEE2AA220UP (2) 500 22 10 10.2 G 85 0.18 2000 EEE2AA220P (2) 500 33 10 10.2 G 90 0.18 2000 EEE2AA330P (2) 500 ✽ Size code( ):Miniaturization product ✽✽ Please kindly accept last shipment : 31/Mar/2014 ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 · Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-12 –

Aluminum Electrolytic Capacitors/ S ■ Standard Prod ucts (Bi-polar) Endurance : 85 °C 2000 h Min. Case size Specifi cation Packaging Q'ty Cap. Ripple tan d W.V. Part No. (±20 %) Size Current Refl ow Dia. Length End ur ance (RoHS:compliant) Taping Code (120 Hz) (120 Hz) (+85 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (pcs) 22 5 5.4 C 29 0.52 2000 EEE0JA220NR (1) 1000 6.3 47 6.3 5.4 D 46 0.52 2000 EEE0JA470NP (1) 1000 10 4 5.4 B 25 0.40 2000 EEE1AA100NR (1) 2000 10 33 6.3 5.4 D 43 0.40 2000 EEE1AA330NP (1) 1000 4.7 4 5.4 B 20 0.32 2000 EEE1CA4R7NR (1) 2000 16 10 5 5.4 C 25 0.32 2000 EEE1CA100NR (1) 1000 22 6.3 5.4 D 39 0.32 2000 EEE1CA220NP (1) 1000 3.3 4 5.4 B 12 0.28 2000 EEE1EA3R3NR (1) 2000 25 4.7 5 5.4 C 21 0.28 2000 EEE1EA4R7NR (1) 1000 10 6.3 5.4 D 28 0.28 2000 EEE1EA100NP (1) 1000 2.2 4 5.4 B 12 0.24 2000 EEE1VA2R2NR (1) 2000 35 4.7 5 5.4 C 22 0.24 2000 EEE1VA4R7NR (1) 1000 10 6.3 5.4 D 30 0.24 2000 EEE1VA100NP (1) 1000 0.22 4 5.4 B 2 0.24 2000 EEE1HAR22NR ✽✽✽ (1) 2000 0.33 4 5.4 B 3 0.24 2000 EEE1HAR33NR ✽✽✽ (1) 2000 0.47 4 5.4 B 5 0.24 2000 EEE1HAR47NR ✽✽✽ (1) 2000 50 1 4 5.4 B 10 0.24 2000 EEE1HA010NR (1) 2000 2.2 5 5.4 C 16 0.24 2000 EEE1HA2R2NR (1) 1000 3.3 5 5.4 C 21 0.24 2000 EEENZ1H3R3R (1) 1000 4.7 6.3 5.4 D 31 0.24 2000 EEE1HA4R7NP (1) 1000 ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 · Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-13 –