ECS-2200X Series 8 Pin DIP Clock Oscillator The ECS-2200X Series clock oscillator can drive both HCMOS and TTL logic. This oscillator aslo fetures tri-state enable/disable Request a Sample capabilities in an 8 pin DIP package OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS Parameters Frequency Range Conditions MIN TYP MAX Units ECS-2200X Frequency (F ) 1.000 ~ 150.000 1.000 150.000 MHz O Operating Temperature 1.000 ~ 150.000 0 +70 ⁰C Range (TOPR) Storage Temperature Range 1.000 ~ 150.000 -55 +125 ⁰C (TSTG) Frequency Stability 1.000 ~ 150.000 All Conditions* -100 +100 PPM 1.000 ~ 25.000 17 25 mA 25.000 ~ 50.000 33 46 mA Input Current (I ) DD 50.000 ~ 80.000 45 77 mA 80.000 ~ 150.000 67 82 mA • 50 pF HC MOS/TTL logic Output Symmetry 1.000 ~ 80.000 50% VDD level 45 50 ± 3 55 % • Tri-State enable/disable 80.000 ~ 150.000 50% V level 40 50 ± 3 60 % DD • Wide frequency range Rise Time (T ) 1.000 ~ 150.000 10% ~ 90% V level 5 nS • Resistance weld R DD package Fall Time (TF) 1.000 ~ 150.000 90% ~ 10% VDD level 5 nS • 3.3V operation (optional) • PbFree/RoHS Compliant Output Voltage (VOL) 1.000 ~ 150.000 IOL = 16 mA 0.5 V (VOH) 1.000 ~ 150.000 IOH = -16 mA 4.5 V Output Current (IOL) 1.000 ~ 150.000 VOL = 0.5V 16 mA (IOH) 1.000 ~ 150.000 VOH = 4.5V -16 mA 1.000 ~ 150.000 TTL 10 TTL Output Load 1.000 ~ 80.000 HCMOS 50 pF 80.000 ~ 150.000 HCMOS 30 pF Start-Up Time (TS) 1.000 ~ 150.000 0.0V to 5.0V 10 mS Supply Voltage +4.75 +5.0 +5.25 V DC * Inclusive of 25⁰C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration. Part Numbering Guide: Example ECS-2200AX-100 ECS - Series - Stability - Frequency Abbreviations ECS 2200 AX = ±100 PPM 100 = 10.000 MHz +5V HCMOS/TTL BX = ±50 PPM Half Size w/Tri- CX = ±25 PPM State 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com

ECS-2200X Series 8 Pin DIP Clock Oscillator Pin Connections Package Dimensions (mm) #1 TRI-STATE #4 CASE GROUND #5 OUTPUT #8 +5V DC Enable/ Disable Function** 𝐈𝐍𝐇 (Pin 1) Output (Pin 5) Open* Active 1 Level V ≥ 2.2V (V ≥ IH IH Active 2.0V Above 70 MHz) ‘O’ Level V ≤ 0.8V High Z IL Figure 1) Side, Bottom, and Top views ** An internal pullup resistor from pin 1 to pin 8 allows active output if pin 1 is left open. Figure 2) TTL Output Wave Form Figure 3) HCMOS Output Wave Form 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com