1 Form C / 2 Form C, 2 A, DS RELAYS 200 mW Nominal operating power relays FEATURES TYPICAL APPLICATIONS 1.1 Form C / 2 Form C contact 1.Telecommunications and 2.Available 2 coil latching type measuring devices 3.DIL terminal array enables use of IC 2.Office equipment sockets 3.Computers and related equipment 4.Industrial equipment RoHS compliant ORDERING INFORMATION DS E Contact arrangement 1: 1 Form C 2: 2 Form C M:Standard type S: High sensitivity type Operating function Nil:Single side stable L2:2 coil latching Nominal coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V Note: * Nominal coil voltage 1.5V type are 1 Form C only. –1– ASCTB17E 201504-T

DS TYPES High sensitivity type Standard type Contact Nominal coil Single side stable type 2 coil latching type Single side stable type 2 coil latching type arrangement voltage Part No. Part No. Part No. Part No. 1.5 V DC DS1E-S-DC1.5V DS1E-SL2-DC1.5V DS1E-M-DC1.5V DS1E-ML2-DC1.5V 3 V DC DS1E-S-DC3V DS1E-SL2-DC3V DS1E-M-DC3V DS1E-ML2-DC3V 5 V DC DS1E-S-DC5V DS1E-SL2-DC5V DS1E-M-DC5V DS1E-ML2-DC5V 6 V DC DS1E-S-DC6V DS1E-SL2-DC6V DS1E-M-DC6V DS1E-ML2-DC6V 1 Form C 9 V DC DS1E-S-DC9V DS1E-SL2-DC9V DS1E-M-DC9V DS1E-ML2-DC9V 12 V DC DS1E-S-DC12V DS1E-SL2-DC12V DS1E-M-DC12V DS1E-ML2-DC12V 24 V DC DS1E-S-DC24V DS1E-SL2-DC24V DS1E-M-DC24V DS1E-ML2-DC24V 48 V DC DS1E-S-DC48V DS1E-SL2-DC48V DS1E-M-DC48V DS1E-ML2-DC48V 3 V DC DS2E-S-DC3V DS2E-SL2-DC3V — — 5 V DC DS2E-S-DC5V DS2E-SL2-DC5V — — 6 V DC DS2E-S-DC6V DS2E-SL2-DC6V — — 2 Form C 9 V DC DS2E-S-DC9V DS2E-SL2-DC9V — — 12 V DC DS2E-S-DC12V DS2E-SL2-DC12V — — 24 V DC DS2E-S-DC24V DS2E-SL2-DC24V — — 48 V DC DS2E-S-DC48V DS2E-SL2-DC48V — — Standard packing: Carton: 50 pcs.; Case: 500 pcs. RATING 1. Coil data 1) Single side stable type Type Novmoilntaagl ecoil P(aict k2-0u°pC v o6l8ta°Fge) D(raotp 2-0o°uCt v6o8lt°aFg)e Nomin(aatl o2[±p01e°C0ra% t6in]8 g°F c)urrent Coil (raets 2is0t°aCn c6e8 °[±F1)0%] Nominpaol wopeerrating (aMt 5av0xo.° lCatap 1gp2eli2 e°dF ) 1.5 V DC 266.7 mA 5.63 Ω 3 V DC 133.3 mA 22.5 Ω 5 V DC 80.0 mA 62.5 Ω Standard 6 V DC 70%V or less of 10%V or more of 66.7 mA 90 Ω 1 Form C: nominal voltage nominal voltage 400 mW 120%V of (M) type 9 V DC (Initial) (Initial) 44.4 mA 203 Ω nominal voltage 12 V DC 33.3 mA 360 Ω 24 V DC 16.7 mA 1,440 Ω 48 V DC 8.3 mA 5,760 Ω 1.5 V DC 133.3 mA 11.3 Ω 3 V DC 1 Form C: 66.7 mA 45 Ω 1 Form C: 5 V DC 80%V or less of 40.0 mA 125 Ω 160%V of nominal voltage High 6 V DC 10%V or more of 33.3 mA 180 Ω nominal voltage sensitivity nominal voltage 200 mW (S) type 9 V DC 2 Form C: (Initial) 22.2 mA 405 Ω 2 Form C: 12 V DC 70%V or less of 16.7 mA 720 Ω 220%V of nominal voltage 24 V DC (Initial) 8.3 mA 2,880 Ω nominal voltage 48 V DC 4.2 mA 11,520 Ω 2) 2 coil latching type Type Novmoilntaagl ecoil (aSt e2t0 v°Col t6a8g°eF ) (Raet s2e0t° Cvo 6lt8a°gFe) Nomin(aatl o2[±p01e°C0ra% t6in]8 g°F c)urrent Coil (raets 2is0t°aCn c6e8 °[±F1)0%] Nominpaol wopeerrating (aMt 5av0xo.° lCatap 1gp2eli2 e°dF ) Set coil Reset coil Set coil Reset coil Set coil Reset coil 1.5 V DC 240 mA 240 mA 6.25 Ω 6.25 Ω 3 V DC 120 mA 120 mA 25 Ω 25 Ω 5 V DC 72 mA 72 mA 69.4 Ω 69.4 Ω Standard 6 V DC 70%V or less of 70%V or less of 60 mA 60 mA 100 Ω 100 Ω 1 Form C: nominal voltage nominal voltage 360 mW 360 mW 120%V of (M) type 9 V DC (Initial) (Initial) 40 mA 40 mA 225 Ω 225 Ω nominal voltage 12 V DC 30 mA 30 mA 400 Ω 400 Ω 24 V DC 15 mA 15 mA 1,600 Ω 1,600 Ω 48 V DC 7.5 mA 7.5 mA 6,400 Ω 6,400 Ω 1.5 V DC 120 mA 120 mA 12.5 Ω 12.5 Ω 3 V DC 1 Form C: 1 Form C: 60 mA 60 mA 50 Ω 50 Ω 1 Form C: 5 V DC 80%V or less of 80%V or less of 36 mA 36 mA 139 Ω 139 Ω 160%V of nominal voltage nominal voltage High 6 V DC 30 mA 30 mA 200 Ω 200 Ω nominal voltage sensitivity 180 mW 180 mW (S) type 9 V DC 2 Form C: 2 Form C: 20 mA 20 mA 450 Ω 450 Ω 2 Form C: 12 V DC 70%V or less of 70%V or less of 15 mA 15 mA 800 Ω 800 Ω 220%V of nominal voltage nominal voltage 24 V DC (Initial) (Initial) 7.5 mA 7.5 mA 3,200 Ω 3,200 Ω nominal voltage 48 V DC 3.75 mA 3.75 mA 12,800 Ω 12,800 Ω –2– ASCTB17E 201504-T

DS 2. Specifications Characteristics Item Specifications Arrangement 1 Form C 2 Form C Contact Initial contact resistance, max. Max. 50 mΩ (By voltage drop 6 V DC 1A) Contact material Ag+Au clad Nominal switching capacity 2 A 30 V DC (resistive load) Max. switching power 60 W, 125 VA (resistive load) Max. switching voltage 220 V DC, 250 V AC Rating Max. carrying current 3 A Min. switching capacity (Reference value)*1 10μA 10m V DC Single side stable (M type: 400 mW, S type: 200 mW); Nominal operating power latching (M type: 360 mW, S type: 180 mW) Min. 100MΩ (at 500V DC) Insulation resistance (Initial) Measurement at same location as “Initial breakdown voltage” section. 1,000 Vrms for 1min. Between open contacts Breakdown voltage (500 Vrms for 1min: 1 Form C type) (Detection current: 10mA.) (Initial) 1,500 Vrms for 1min. Electrical Between contact and coil (1,000 Vrms for 1min: 1 Form C type) (Detection current: 10mA.) characteristics Max. 65°C Temperature rise (By resistive method, nominal coil voltage applied to the coil, contact carrying current: 2A.) Operate time [Set time] (at 20°C 68°F) Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Release time [Reset time] (at 20°C 68°F) Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Functional*2 Min. 490 m/s2 Min. 490 m/s2 Shock resistance Mechanical Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) characteristics Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.) Vibration resistance Destructive 10 to 55 Hz at double amplitude of 5 mm Mechanical Min. 108 (107: 1 Form C latching type) (at 600 cpm) Expected life Electrical Min. 5×105 rated load (at 60 cpm) Ambient temperature: –40°C to +70°C –40°F to +158°F Conditions for operation, transport and storage*3 Conditions Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Max. operating speed (at rated load) 60 cpm Unit weight Approx. 3 g .11 oz Approx. 4g .14oz Notes:*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. TX/TX-S/TX-D relay AgPd contact type are available for low level load switching (10V DC, 10mA max. level). *2 Half-wave pulse of sine wave: 11ms; detection time: 10μs *3 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES. –3– ASCTB17E 201504-T

DS REFERENCE DATA 1. Maximum switching capacity 2. Life curve (Resistive load) 3. Contact reliability for AC loads Tested sample: DS2E-S-DC24V 10 pcs. Operating speed: 20 cpm. Detection level: 200 mΩ 1,000V 401,000 F(t), %999599...009 Contact voltage, DC11000VV ×No. of operations, 111000 1253 V0 AVC DC 13571250000.......0000000 1A5 A1 22550V V AACC 0.3A 250V AC0.5A 125V AC 0.5 0. Weibull 0.2 probability data 10mV 0.1 10μA 100mA 1A 0 1 2 0 10 100 1,000 Switching current Switching current, A No. of operations, ×104 4. Operate and release time characteristics 5-(1). Influence of adjacent mounting 5-(2). Influence of adjacent mounting (2 Form C single side stable type) (1 Form C) (2 Form C) Test condition: Without diode connected to coil in parallel 4 % % ms nge, 10 Pick-up voltage (O1FF)(2)(O3FF) nge, 10 Pick-up voltage (O1FF)(2)(O3FF) ease time, 3 Operate time (mean) Rate of cha–100 ON ON Rate of cha–100 ON ON el d r 2 Operate an 1 Release time (mean) of change, % 100 Drop-out voltage OOFNF OOFNF of change, % 100 Drop-out voltage OOFNF OOFNF e e at–10 at–10 R R 0 80 100 120 5 10 5 10 Coil applied voltage, % .197 .394 .197 .394 Inter-relay distance , mminch Inter-relay distance , mminch DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ DS (1 Form C) Single side stable, 2 coil latching PC board pattern (Bottom view) CAD Data External dimensions Single side stable 2 coil latching 15 9.9 2.54 5-0.9 dia. 2.54 6-0.9 dia. .590 .390 .100 5-.035 dia. .100 6-.035 dia. 2.54 2.54 .100 .100 9.3 .93.990.366 .00.264 7.62 7.62 .300 .300 3.4 .134 5.08 7.62 0.0.624 .52.261 0.0.312 .52.0008 7.3.6020 5.2.0080 7.3.6020 .200 .300 7.62 .300 Schematic (Bottom view) General tolerance: ±0.3 ±.012 Single side stable 2 coil latching 1 6 1 3 6 12 10 7 12 10 7 (Deenergized condition) (Reset condition) Tolerance: ±0.1 ±.004 –4– ASCTB17E 201504-T

DS DS (2 Form C) Single side stable CAD Data External dimensions PC board pattern (Bottom view) 20 9.9 2.54 8-0.9 dia. .780 .390 .100 8-.035 dia. 2.54 .100 9.3 9.9.366 .00.264 .390 7.62 .300 3.4 .134 5.2.0080 5.2.0080 7.3.6020 0.0.624 7.52.6.2621 0.0.312 5.2.0080 5.2.0080 7.3.6020 .300 Schematic (Bottom view) General tolerance: ±0.3 ±.012 9 11 13 16 8 6 4 1 (Deenergized condition) Tolerance: ±0.1 ±.004 DS (2 Form C) 2 coil latching CAD Data External dimensions PC board pattern (Bottom view) 20 9.9 2.54 10-0.9 dia. .780 .390 .100 10-.035 dia. 2.54 .100 9.3 .93.990.366 .00.264 7.62 .300 3.4 .134 5.08 5.08 5.08 0.0.624 .52.261 0.0.312 5.2.0080 5.2.0080 5.2.0080 2.1.5040 .200 .200 .2002.54 7.62 .100 .300 Schematic (Bottom view) General tolerance: ±0.3 ±.012 9 11 13 1516 8 6 4 2 1 (Reset condition) Tolerance: ±0.1 ±.004 NOTES 1. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. –5– ASCTB17E 201504-T

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P anasonic: DS1E-M-DC5V DS1E-S-DC5V DS2E-S-DC5V DS1E-M-DC12V DS1E-S-DC12V DS2E-S-DC12V DS2E-SL2- DC12V DS1E-M-DC24V DS1E-S-DC24V DS2E-S-DC24V DS2E-S-DC48V DS2E-S-DC3V DS2E-S-DC9V DS1E- M-DC1.5V DS1E-M-DC6V DS1E-S-DC1.5V DS1E-S-DC3V DS1E-SL2-DC1.5V DS1E-SL2-DC12V DS1E-SL2- DC24V DS1E-SL2-DC48V DS1E-SL2-DC5V DS1E-SL2-DC6V DS1E-SL2-DC9V DS2E-SL2-DC5V DS1E-M- DC12V-TB DS2E-SL2-DC24V DS1E-M-DC48V DS1E-S-DC9V DS2E-SL2-DC9V DS1E-S-DC6V DS1E-S-DC48V DS2E-SL2-DC6V DS1E-M-DC3V DS2E-S-DC6V DS1E-M-DC9V DS1E-SL2-DC3V DS1E-M-DC1.5V-R DS1E-M- DC12V-R DS1E-M-DC24V-R DS1E-M-DC24V-TB DS1E-M-DC5V-R DS1E-M-DC9V-R DS1E-S-DC12V-R DS1E-S- DC12V-TB DS1E-S-DC24V-R DS1E-S-DC5V-R DS1E-S-DC5V-TB DS1E-SL2-DC12V-R DS1E-SL2-DC3V-R DS1E-SL2-DC5V-R DS1E-SL2-DC9V-R DS1E-SL-DC1.5V DS1E-SL-DC12V DS1E-SL-DC24V DS1E-SL-DC3V DS1E-SL-DC48V DS1E-SL-DC5V DS1E-SL-DC5V-R DS1E-SL-DC6V DS2E-S-DC12V-TB DS2E-S-DC6V-TB DS2E-S-DC9V-TB