Multilayer Organic (MLO®) Diplexers MLO® Diplexers 0805 WCDMA MLO® TECHNOLOGY The 0805 diplexer is a best in class low profile multilayer organic passive device that is based on AVX’s patented multilayer organic high density interconnect technology. The MLO® diplexer uses high dielectric constant and low loss materials to realize high Q passive printed passive elements such as inductors and capacitors in a multilayer stack up. The MLO® diplexers can support multiple wireless standards such as WCDMA, CDMA, WLAN, and GSM and are less than 0.6mm in thickness. These components are ideally suited for band switching for dual band systems. All diplexers are expansion matched to FR4 thereby resulting in improved reliability over standard Si and ceramic devices. APPLICATIONS Multiband applications including WCDMA, WLAN, WiMax, GPS, and cellular bands LAND GRID ARRAY ADVANTAGES • Low Insertion Loss • Excellent Solderability • Low Parasitics • Low Profile HOW TO ORDER COMPONENT DIMENSIONS AND FUNCTIONS DP 05 A 1940 7 TR Bottom View Side View 0.64±0.05 0.20±0.10 (0.025±0.002) (0.008±0.004) Type Size Design Frequency Finish Packaging (MHz) 7 = Au Tape & Reel 0.04±0.04 T = NiSn TR = 3 Kpcs 1.28±0.20 (0.002±0.002) (0.050±0.008) TR/500 = 500 pcs 0.25±0.10 0.95±0.05 (0.010±0.004) QUALITY INSPECTION (0.037±0.002) Finished parts are 100% tested for electrical parameters and visual characteristics. 0.20±0.10 0.55±0.10 (0.008±0.004) 0.44±0.10 (0.022±0.004) (0.017±0.004) OPERATING TEMPERATURE 2.12±0.20 (0.083±0.008) Unit:mm(inches) -40ºC to +85ºC TERMINATION Finishes available in Ni/Sn, Immersion Sn, Immersion Au and OSP coatings which are compatible with automatic soldering technologies which include Terminal No. Terminal Name reflow, wave soldering, vapor phase and manual. 1 High Frequency Port 2 GND ORIENTATION IN TAPE 3 Low Frequency Port Top View 4 GND 5 Common Port 6 GND 6 1 6 1 PART NUMBER: DP05A19407TR 5 2 5 2 Specification @ 25ºC 4 3 4 3 Size [mm(inches)] 2.12 x 1.28 (0.083 x 0.050) Height [mm(inches)] 0.55 (0.021) Volume (mm^3) 1.5 Frequency Range (F1) (MHz) 892±68 Frequency Range (F2) (MHz) 1940±230 POWER CAPACITY Insertion Loss (F1, at Fc) (dB) -0.4 4.5W Maximum Insertion Loss (F2, at Fc) (dB) -0.65 Attenuation (F1) at (F2) (dB) -23 Attenuation (F2) at (F1) (dB) -20 VSWR (Input @ F1) 1.3 VSWR (Input @ F2) 1.4 VSWR (Lowband @ F1) 1.4 VSWR (Highband @ F2) 1.2 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 359 012419

Multilayer Organic (MLO®) Diplexers MLO® Diplexers 0805 WCDMA S PARAMETER MEASUREMENTS 0 0 -5 -10 High Band Low Band -10 -20 1)1) -15 1)1) 1.3. 1.2. S(S( S(S( -30 B(B( -20 B(B( dd dd -40 Return Loss -25 -30 Return Loss -50 -35 -60 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz freq, GHz -5 -10 -15 3)) S(2. -20 B( Isolation d -25 -30 -35 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz Note: Measurements were taken using an Anritsu 4 port VNA; Diplexer was mounted on a custom evaluation board. To reduce systematic errors from the VNA, the coaxial measure- ment cables, and evaluation board, a Short-Open-Load-Thru (SOLT) calibration was performed, using a custom fabricated calibration substrate. This is the most common coaxial calibration methods. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 360 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419