5-60 Watts C xppower.com D DNR Series - C A • Rugged Design for Industrial Applications • Up to 89% Efficiency • Full Power to +60 °C • Wide Adjustment Range • DC OK 24 V Models • DC Standby Versions • 3 Year Warranty Specification Input General Input Voltage • 90-264 VAC, 120-375 VDC (DNR05/10/18) Efficiency • See tables 85-264 VAC, 90-375 VDC (DNR30/60) Isolation • 3000 VAC Input to Output, 1500 VAC Input Input Frequency • 47-63 Hz to Ground, 500 VAC Output to Ground Input Current • See tables Switching Frequency • 132 KHz typical, 55-90 kHz (DNR60) Inrush Current • 5-18 W: 15/30 A at 115/230 VAC Signals • DC ON indicator LED Green: All models 30 W: 20/40 A at 115/230 VAC DC LOW indicator LED Red: 5-18 W models 60 W: 30/60 A at 115/230 VAC DC OK: 24 V 30-60 W models Power Factor • EN61000-3-2, class A DC OK: All standby models Earth Leakage Current • 0.8 mA max MTBF • 800 kHrs typical Bellcore, Issue 6 at +40 °C, Input Protection • Internal fuse T2A, 250 VAC fitted in line GB (DNR05/10/18), 530 kHrs typical Bellcore, Issue 6 at +40 °C, GB (DNR30/60) DIN Rail • Compatible with TS35/7.5 or TS35/15 Output Output Voltage • See tables Environmental Output Voltage Trim • See tables Initial Set Accuracy • ±1% Operating Temperature • -20 °C to +70 °C (DNR05/10/18) -40 °C to +70 °C, start up at -35 °C Minimum Load • No minimum load required (DNR30/60), all units derate linearly from Start Up Delay • <1 s (may increase at low 60 °C (see derating curves) temperature extremes) Cooling • Convection-cooled with 25mm free space Start Up Rise Time • <150 ms all sides Hold Up Time • 30/130 ms at 115/230 VAC (DNR05) Operating Humidity • 20-95% RH, non-condensing 25/100 ms at 115/230 VAC (DNR10) Storage Temperature • -25 °C to +85 °C (DNR05/10/18) 20/75 ms at 115/230 VAC (DNR18) -40 °C to +85 °C (DNR30/60) 20/30 ms at 115/230 VAC (DNR30) 20/30 ms at 115/230 VAC DNR60) Shock • 15 g, 11 ms, X, Y & Z axis, 3 shocks/axis in both directions Line Regulation • 5-18 W: ±1.0% max 30-60 W: ±0.5% max Vibration • 2 g, 10 Hz to 500 Hz, along X, Y & Z axis, 60 mins/axis, mounted on rail Load Regulation • 5-18 W: ±2.0% max 30-60 W: ±0.5% max EMC & Safety Parallel Operation • Redundancy module DPM10 available for load currents up to 10 A (not with Emissions • EN55022, level B conducted & radiated standby system), contact sales Harmonic Currents • EN61000-3-2, class A Transient Response • 4% max deviation recovery to within Voltage Flicker • EN61000-3-3 1% in 2 ms for a 50% load change ESD Immunity • EN61000-4-2, level 4, Perf Criteria A Ripple & Noise • 50 mV pk-pk, 20 MHz bandwidth (may increase at low temperature extremes) Radiated Immunity • EN61000-4-3, level 3, Perf Criteria A Overvoltage Protection • Output clamps at 120-145% Vnom, EFT/Burst • EN61000-4-4, level 4, Perf Criteria A auto recovery Surge • EN61000-4-5, installation class 3, Overload Protection • 110-165% constant current (DNR05-18) Perf Criteria A 105-150% power limited (DNR30/60) Conducted Immunity • EN61000-4-6, level 3, Perf Criteria A Short Circuit Protection • Power limited, auto recovery Magnetic Field • EN61000-4-8, level 4 Perf Criteria A Temperature • ±0.03%/°C Dips & Interruptions • EN61000-4-11, 30% 10 ms, Coefficient 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • EN60950-1, UL508 Pollution Degree 2, UL1310 class 2 power recognised, See note 3 & ratings table, UL60950-1 Overvoltage Category II, UL508 Overvoltage Category III, DNR30 & DNR60: SEMI F47 ANSI/ISA 12.12.01. Class 1, Division 2 Groups A,B,C and D

DNR05-60 A Models and Ratings C Output Input Current (typ.) Output Output Current Efficiency (typ.) Model Number - Voltage 115 VAC 230 VAC Voltage Trim D 5 V 0.12 A 0.08 A 4.50-5.75 V 1.000 A 69% DNR05US05(1) C 12 V 0.12 A 0.08 A 10.80-13.80 V 0.420 A 72% DNR05US12(1) 15 V 0.12 A 0.08 A 13.50-17.25 V 0.340 A 72% DNR05US15(1) 24 V 0.12 A 0.08 A 21.60-28.80 V 0.210 A 72% DNR05US24(1) 5 V 0.20 A 0.13 A 4.50-5.75 V 2.000 A 73% DNR10US05(1) 12 V 0.20 A 0.13 A 10.80-13.80 V 0.840 A 75% DNR10US12(1) 15 V 0.20 A 0.13 A 13.50-17.25 V 0.670 A 76% DNR10US15(1) 24 V 0.20 A 0.13 A 21.60-28.80 V 0.420 A 76% DNR10US24(1) 5 V 0.36 A 0.21 A 4.50-5.75 V 3.000 A 75% DNR18US05(1) 12 V 0.36 A 0.21 A 10.80-13.80 V 1.500 A 77% DNR18US12(1) 15 V 0.36 A 0.21 A 13.50-17.25 V 1.200 A 77% DNR18US15(1) 24 V 0.36 A 0.21 A 21.60-28.80 V 0.750 A 77% DNR18US24(1) 5 V 0.56 A 0.33 A 5.00-5.50 V 6.000 A 79% DNR30US05(1,3,4) 12 V 0.56 A 0.33 A 12.00-14.00 V 2.500 A 84% DNR30US12(1,3,4) 24 V 0.56 A 0.33 A 24.00-28.00 V 1.250 A 86% DNR30US24(1,3,4) 48 V 0.56 A 0.33 A 48.00-55.00 V 0.625 A 86% DNR30US48(1,3,4) 5 V 1.10 A 0.59 A 5.00-5.50 V 10.000 A 79% DNR60US05(1,3,4) 12 V 1.10 A 0.59 A 12.00-14.00 V 5.000 A 86% DNR60US12(1,3,4) 24 V 1.10 A 0.59 A 24.00-28.00 V 2.500 A 89% DNR60US24(1,3,4) 48 V 1.10 A 0.59 A 48.00-55.00 V 1.250 A 89 % DNR60US48(1,3,4) Notes 1. Add suffix ‘-S’ for spring clamp connection option. 3. Approved to UL1310, but 5 & 12 V not Class 2 Power recognised. 2. 30-60 W models are suitable for battery-charging applications. 4. SEMI F47 compliant. Derating Curves , DNR05-18 W Models 100 80 %) 60 d ( oa 40 L 20 0 -20 0 10 20 30 40 50 60 70 DNR30-60 W Models 100 80 %) 60 d ( oa 40 L 20 0 -40 0 10 20 30 40 50 60 70 Ambient Temp (˚C)

C DNR05-60 Mechanical Details D - DNR05/10/18 W Models C A 0.89 4.53 (115.0) (22.5) 2 1 -V +V DC Output DC LO 3.48 ON (88.5) Voltage Trim N L 1 3 AC Input DNR05, 10, 18 Connections Conn Pin Designation 1 Ground AC 2 Neutral Notes Input 3 Line 1. All dimensions in inches (mm). 4. Connection screw maximum torque: DC 1 Positive 2. Weight 0.33 lb (150 g) approx. Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm) Output 2 Negative 3. Tolerance: ±0.02 (0.5) maximum. 30/60 W Models 1.59 4.53 (115.0) (40.5) 5 1 -V -V +V+V DC OK DC Output Voltage Trim 3.60 (90.0) ON N L 1 3 DNR30/60 Connections AC Input Conn Pin Designation 1 Ground AC 2 Neutral Input 3 Line 1 DC OK* 2 Positive DC 3 Positive Notes Output 4 Negative 1. All dimensions in inches (mm). 4. Connection screw maximum torque: 5 Negative 2. Weight 0.8 lb (350 g) approx. Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm) 3. Tolerance: ±0.02 (0.5) maximum. * 24 V and standby models only.

DNR05-60 A Standby Versions C - 5 1 Maximum current drain from battery by PSU when inactive 22 mA D -V -V +V+V DOCK +V DN R30/6 0 Co nnections C DC Output +V Conn Pin Designation DC OK 1 Ground Voltage AC Input 2 Neutral Trim 3 Line D1 oil Relay 1 DC OK C Control e.g. IN4001 2 Positive LOAD DC Output 3 Positive ON 4 Negative 5 Negative Fuse Notes 1. With AC in, unit provides power to the load and to charge the -V Lead battery. The DC OK signal acts by sensing a voltage on +V and Acid holds the relay closed. Battery 2. With loss of AC in, battery voltage is present on +V. DC OK N L -V signal holds the relay closed. Battery supplies power to the load. 1 3 3. As the battery discharges, its voltage falls. When this falls below DNR30/60 connection for DC the level shown in the table below the DC OK signal switches off AC Input standby system applications to allow the relay to open to disconnect and protect the battery. Output Set Voltages For Standby Versions Model(1) Voltage Current DC OK Signal Off Efficiency DNR30US12# 13.6 V 2.20 A 10.30-11.30 V 84% DNR30US24# 27.2 V 1.10 A 21.10-22.10 V 86% DNR30US48# 54.5 V 0.55 A 42.70-43.70 V 86% DNR60US12#(2) 13.6 V 4.40 A 10.30-11.30 V 86% DNR60US24# 27.2 V 2.20 A 21.10-22.10 V 89% DNR60US48# 54.5 V 1.10 A 42.70-43.70 V 89% Notes 1. Suffix # indicates standby version. 2. Not UL1310 approved. DC OK 30/60 W Models Output good = 24 V Output not good = 0 V RL > 70 0Ω N/O DCOK DCOK N/C 2 2 K 0 .5 W oiloil CC 5 .1 V -Vout Common -Vout 0 .3 W Example using external relay Example using external components to create volt-free contact to create TTL signal Standard on 24 V models, 30-60 W only. 04 Aug 16

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: X P Power: DNR10US24-S DNR30US24 DNR60US05 DNR10US15 DNR30US05-S DNR60US48 DNR10US12 DNR05US24 DNR60US48-S DNR10US05-S DNR18US24 DNR60US12-S DNR60US24 DNR18US24-S DNR10US24 DNR05US12 DNR10US12-S DNR30US05 DNR30US12-S DNR30US48-S DNR18US12-S DNR18US15 DNR05US05 DNR30US24-S DNR18US12 DNR30US48 DNR10US05 DNR10US15-S DNR30US12 DNR18US15-S DNR18US05 DNR18US05-S DNR60US05-S DNR60US12 DNR60US24-S