DK110 Specifications Installation and Operating Instructions LCD Digital Panel Meters 3½ Digit LCD FEATURES }} Space}saving}design}only}0.67”(17mm)}deep }} Occupies}less}than}2.5}x}1.1}inches}of}front}panel}space }} High}contrast}LCD }} 3½}digits}with}0.39”}LCD }} Snap-In}bezel}eliminates}the}need}for}mounting}hardware} }} Low}power}requirement}(3mA)}is}ideal}for}battery}powered}} } } applications }} User-selectable}decimal}points SPECIFICATIONS ORDERING INFO DISPLAY PART NUMBER METER INPUT Digits: 3 ½ digits (±1999 counts) DK110 .............................................................................................200mV Type: 0.39” (10mm) high contrast reflective LCD DK111 ....................................................................................................2V Polarity: automatic, “-” displayed. Decimal Points: 3 position, user-selectable DK112 ..................................................................................................20V Overrange: three lower order digits blank for inputs >1999 & < -1999 ACCESSORIES Hold: display hold function is standard C10-5 ...............................................5" - 10 Pin Connector / Wire Assembly INPUTS J1C10 .............................................12" - 10 Pin Connector / Wire Assembly Ranges: ±200.0 mV, ±2.000 V, ±20.00 VDC Configuration: bipolar, differential PW2-5 .......................................Regulated 120V AC to 5V DC Power Supply Protection: ±350 VDC, (±100 VDC on 200 mV range) CVC ..............................................................................................Calibrator Impedance: >1 MΩ, (>10 MΩ on 200 mV range) PERFORMANCE Accuracy: ±(0.1% +1 counts) typical ±(0.2% + 2 counts) maximum Conversion Rate: 3 per second Normal Mode Rejection: >30 dB @ 60 Hz Common Mode Range: ±1 VDC Common Mode Rej.: >86 dB Zero Adjustment: automatic Warmup: 10 minutes typical Temperature Coeff.: ±100 ppm per °C typical ENVIRONMENT Operating Range: 0 to 50 °C Storage Range: -10 to 70 °C POWER SUPPLY Voltage: +5 VDC (±5%) Current: 3 mA MOUNTING snap-in bezel mount CONNECTION 10 pins, 0.025” square on 0.1” centers C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: INfO@CTONINdusTrIes.COm

DK110 Specifications Installation and Operating Instructions LCD Digital Panel Meters 3½ Digit LCD DIMENSIONS WIRING PIN DESCRIPTION +5V +5V DPM POWER SUPPLY GND DPM POWER SUPPLY GROUND DP.C DECIMAL POINT RETURN DP.1 1XX.X DP.2 1X.XX DP.3 1.XXXX IN (+) POSITIVE INPUT SIGNAL IN (-) NEGATIVE INPUT SIGNAL NC NO CONNECTION REQUIRED HOLD HOLD LAST DISPLAY C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: INfO@CTONINdusTrIes.COm C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: INfO@CTONINdusTrIes.COm