1.25mm Pitch Super Low profile Crimping Connector DF14 Series (cid:2) Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. 2.5mm Board mounting height: A signal can be fetched from the area where there is no board to Board Mounting Figure board space. 2. Correspond to Automatic Mounting The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected. 3. Four Wall Type Without Friction to Board by Socket The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the header has the wall on the board side and doesn't have any trouble resulted from the friction to board by socket. In addition, the metal fitting is attached to prevent the solder peel. 1 (cid:2) Applications LCD, Note PC, Mobile Terminal Small business equipment, Video camera B173

(cid:2) Product Specifications Current rating 1A Operating Temperature Range-25 to +85ç(Note 1) Storage Temperature Range -10 to +60ç(Note 2) Rating Voltage rating 150V AC Operating Moisture Range 40 to 80% Storage Moisture Range 40 to 70% Item Specification Condition 1. Insulation Resistance 500Mohms Min 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute 3. Contact Resistance 30mohms Max 100mA 4. Insertion/Extraction Force MIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.3±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30mohmsMax Insulation resistance:500MohmsMin 96 hours at temperature of 40ç and humidity of 90% to 95% (-25ç: 30 minutes➝ 5 to 35ç: 10 minutes➝ 85ç: 30 minutes➝ 7. Temperature Cycle Contact resistance: 30mohms Max Insulation resistance: 500MohmsMin 5 to 35ç: 10 minutes) 5 cycles 8. Operating Life Contact resistance: 30mohms Max Tin plating: 30 cycles Gold plating: 50 cycles Reflow: At the recommended temperature profile 9. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. (cid:2) Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige UL-94V-0 Crimping Contact for Socket Contact Phosphor Copper Tin plating or Gold plating ––––––– Insulator Polyamide Beige UL-94V-0 Pin Header Contact Brass Tin plating or Gold plating ––––––– Fitting Phosphor copper Tin plating ––––––– Note . Hirose’s tin plating product takes measures against whisker. (cid:2) Ordering Information (cid:3) Connector DF14 - * S - 1.25 C 1 2 3 4 5 1 Series Name: DF14 4 Contact Pitch: 1.25mm 2 Number of Contacts: 2 to 10, 15, 20, 25, 30 5 Contact Type 3 Connector Type C: Crimping socket S: Single row socket H: Right angle SMT P: Single row pin header (cid:3) Contact DF14 - 2628 SCF A 1 2 3 1 Applicable cable size 2 Packaging Type 2628: AWG26 to 28 SCF: Socket contact/reel 3032: AWG30 to 32 3 Plating Type None: Tin plating A: Gold plating B174

(cid:2) Crimping Socket Photo: Contact insertion state Unit: mm Part Number CL No. Number of Contacts A B DF14- 2S-1.25C(**) 538-0005-8-** 2 4.45 1.25 DF14- 3S-1.25C(**) 538-0006-0-** 3 5.70 2.50 DF14- 4S-1.25C(**) 538-0007-3-** 4 6.95 3.75 DF14- 5S-1.25C(**) 538-0008-6-** 5 8.20 5.00 DF14- 6S-1.25C(**) 538-0009-9-** 6 9.45 6.25 DF14- 7S-1.25C(**) 538-0010-8-** 7 10.70 7.50 DF14- 8S-1.25C(**) 538-0011-0-** 8 11.95 8.75 DF14- 9S-1.25C(**) 538-0013-6-** 9 13.20 10.00 DF14-10S-1.25C(**) 538-0014-9-** 10 14.45 11.25 DF14-15S-1.25C(**) 538-0054-3-** 15 20.70 17.50 DF14-20S-1.25C(**) 538-0059-7-** 20 26.95 23.75 DF14-25S-1.25C(**) 538-0064-7-** 25 33.20 30.00 [Specific No.]–**,(**) DF14-30S-1.25C(**) 538-0012-3-** 30 39.45 36.25 None: 1 bag 100 pcs. Note 1.The quantity at the specific NO. "None" is delivered per bag. If needed, please order the products per bag. (cid:2) Socket Crimping Contact Part Number CL No. Packaging Type Quantity Finish DF14-2628SCF 538-0001-7-** Reel 10,000 Tin plating DF14-3032SCF 538-0003-2-** Reel KApplicable Cable (Tin plating Annealed copper wire) KRecommended Cable Conductor Size (Wire construction) Jacket Diameter UL1571 AWG26(7 cores./0.16mm) AWG28(7 cores./0.127mm) KStrip Length Ø0.54to Ø1mm AWG30(7 cores./0.1mm) AWG32(7 cores./0.08mm) 1.2 to 1.9mm Note:If other cables are used instead of the applicable cable, contact Hirose sales department. BApplicable Crimping Tool Type Part Number CL No. Applicable Contact AP105-DF14-2628S 901-4548-1 DF14-2628SCF/SCFA Applicator AP105-DF14-3032S 901-4544-0 DF14-3032SCF/SCFA Press Main Unit CM-105 901-0005-4 --------------------------------------------- DF14-2628/CR-HT 550-0261-1 DF14-2628SCF/SCFA Manual Crimping Tool DF14-3032/CR-HT 550-0262-4 DF14-3032SCF/SCFA Note 1.If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2.Use the reel contact sequentially cut for manual crimping tool. B175

(cid:2) Right Angle Pin Header (SMT) Note 1."Without boss" indicates the style with no boss. BPCB mounting pattern BTube Packaging Dimensions [Specific No.]–**,(**) (20): Tin plating tube packaging Note 2."Without boss" indicates that no hole is needed. (21): Tin plating embossed tape packaging (50): Gold plating tube packaging (59): Gold plating embossed tape packaging Unit: mm With boss Without boss Tube Packaging Number of Contacts A B C D Part Number CL No. Part Number CL No. Quantity DF14- 2P-1.25H(**) 538-0021-4-** DF14A- 2P-1.25H(**) 538-0033-3-** 2 7.45 1.25 6.45 8.05 66pcs. DF14- 3P-1.25H(**) 538-0022-7-** DF14A- 3P-1.25H(**) 538-0034-6-** 3 8.70 2.50 7.70 9.30 56 DF14- 4P-1.25H(**) 538-0023-0-** DF14A- 4P-1.25H(**) 538-0035-9-** 4 9.95 3.75 8.95 10.55 49 DF14- 5P-1.25H(**) 538-0024-2-** DF14A- 5P-1.25H(**) 538-0036-1-** 5 11.20 5.00 10.20 11.80 44 DF14- 6P-1.25H(**) 538-0025-5-** DF14A- 6P-1.25H(**) 538-0037-4-** 6 12.45 6.25 11.45 13.05 39 DF14- 7P-1.25H(**) 538-0026-8-** DF14A- 7P-1.25H(**) 538-0038-7-** 7 13.70 7.50 12.70 14.30 36 DF14- 8P-1.25H(**) 538-0027-0-** DF14A- 8P-1.25H(**) 538-0039-0-** 8 14.95 8.75 13.95 15.55 32 DF14- 9P-1.25H(**) 538-0028-3-** DF14A- 9P-1.25H(**) 538-0040-9-** 9 16.20 10.00 15.20 16.80 30 DF14-10P-1.25H(**) 538-0029-6-** DF14A-10P-1.25H(**) 538-0041-1-** 10 17.45 11.25 16.45 18.05 28 DF14-15P-1.25H(**) 538-0084-4-** DF14A-15P-1.25H(**) 538-0114-3-** 15 23.70 17.50 22.70 24.30 20 DF14-20P-1.25H(**) 538-0089-8-** DF14A-20P-1.25H(**) 538-0119-7-** 20 29.95 23.75 28.95 30.55 16 DF14-25P-1.25H(**) 538-0094-8-** DF14A-25P-1.25H(**) 538-0124-7-** 25 36.20 30.00 35.20 36.80 13 DF14-30P-1.25H(**) 538-0020-1-** DF14A-30P-1.25H(**) 538-0045-2-** 30 42.45 36.25 41.45 43.05 11 Note 1.Please order the tube packaging product, multiplying the packaging quantity (pcs.). Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) B176

BEmbossed Carrier Tape Dimensions (cid:2) 2 to 10 Contacts (cid:2) 15, 20, 25, 30 Contacts Unit: mm Inserted Connector Number of Contacts A B C D DF14/14A- 2P-1.25H 2 16 7.5 16.4 ––– DF14/14A- 3P-1.25H 3 16 7.5 16.4 ––– DF14/14A- 4P-1.25H 4 24 11.5 24.4 ––– DF14/14A- 5P-1.25H 5 24 11.5 24.4 ––– DF14/14A- 6P-1.25H 6 24 11.5 24.4 ––– DF14/14A- 7P-1.25H 7 24 11.5 24.4 ––– DF14/14A- 8P-1.25H 8 24 11.5 24.4 ––– DF14/14A- 9P-1.25H 9 24 11.5 24.4 ––– DF14/14A-10P-1.25H 10 24 11.5 24.4 ––– DF14/14A-15P-1.25H 15 44 20.2 44.4 40.4 DF14/14A-20P-1.25H 20 44 20.2 44.4 40.4 DF14/14A-25P-1.25H 25 56 26.2 56.4 52.4 DF14/14A-30P-1.25H 30 56 26.2 56.4 52.4 B177

BPrecautions for Use 1. Recommended Temperature Profile (SMT) Note 1.The soldering process is allowed up to twice under the same condition. However, the interval between the first and second processes must be maintained at the room temperature. Note 1.The temperature indicates the board surface temperature on the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Manual soldering: 290ç for 2 seconds 3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm 4. Board Sled (SMT) Max 0.03mm at the connector center area, based on both connector edges 5. Cleaning Condition Refer to Nylon Connector Use Hand book. 6. Connection Condition Refer to Nylon Connector Use Hand book. (cid:2) Be careful to carry out the crimping operation according to the "Crimping Condition Sheet" and "Crimping Quality Reference", because the crimping contact style is too small. 7. Cautions (cid:2) Be careful for an excessive scoop insertion/extraction, which will cause damage to the product. B178