D Subminiature Connectors

D Subminiature Contents The ITT Cannon Contents Page D Subminiature family of General Application D Subminiature Connectors (cid:1) Straight PCB Selection Guide.............................................2 connectors has grown to D*NG Pressfit Termination...............................................4 D*M Solder Termination (Machined) — Standard PC Tails.......................6 include a wide variety of styles, ZD* Solder Termination (Stamped).........................................8 D* Solder Termination (Machined) — European PC Tails.......................10 options and accessories and is D* Wrap Post Termination..............................................12 often the most economical (cid:1) 90°PCB Selection Guide...............................................14 D*M Solder Termination (Machined) — Standard Footprint .318(cid:2)or .283(cid:2)(cid:2)inch ...16 solution to any interconnect ZED* Solder Termination (Stamped) — Standard Footprint .318 inch ..............18 D* Solder Termination (Machined) — European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm......20 problem. Ideally suited for ZD* Solder Termination (Stamped) — European Footprint 10,2 mm...............28 both commercial/industrial (cid:1) Cable Selection Guide.................................................30 D Solder Cup Solder Termination (Machined) with Tin Shells ....................32 applications and military/ ZD* Solder Cup Solder Termination (Stamped) with Tin Shells ...................34 D*A Crimp Connectors without Contacts...................................36 aerospace applications, D*W Discrete Wire IDC ................................................38 ITT Cannon D Subminiature Special Application D Subminiature Connectors (cid:1) Combo DSelection Index..............................................42 connectors have found Combo DPCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option) ........44 Combo DPCB Connectors with High Power................................60 worldwide acceptance in a Combo DPCB Connectors with (Size 20) Signal Contacts Only..................74 multitude of applications Combo DCable Solder Cup ............................................78 Combo DCable Crimp Connectors and Shield Cans ..........................80 ranging from office equipment Loose Contacts and Tooling.............................................83 (cid:1) Commercial Micro D Selection Index......................................96 to satellites. MDSM Connectors and Tooling ..........................................98 (cid:1) Filter D Selection Index................................................104 Product Performance.................................................106 D*JK PCB Connectors................................................108 D*JT Solder Cup and Combo High Power Connectors.........................122 High Reliability D Subminiature Connectors (cid:1) Military/High Reliability Selection Index....................................130 PCB 90°, Straight, Wrap Post, and Cable Solder Cup .........................132 24308-Style Cross References and Test Data ..............................142 Military/High Reliability Combo D .......................................146 (cid:1) SNASA/GSFC & ESA-SCC Cross References..............................195 Accessories Selection Guide ..............................................198 Backshells.........................................................200 Locking Hardware ...................................................208 Miscellaneous ......................................................214 Reader’s Resource Selection Index.........................................219 Dimensional Reference Data............................................220 Lease Tooling ......................................................275 Glossary of Terms...................................................276 Obsolete Products/Available Products Not Previously Listed....................282 Part Number Index...................................................283 Product Safety and Warranty...........................................297 On the Cover (cid:1) Filter D, Combo D, Commercial Micro D Combo Dis a registered trademark of ITT Cannon in the United States. (MDSM), Pressfit D, (cid:2)Connector footprint measured from the front shell. and Standard D (cid:2)(cid:2)Connector footprint measured from the rear shell. Our facility is not currently certified by the DLA and this Dimensions are shown in mm (inch) 1 product is not covered Dimensions subject to change by the QPL/QML.

D Subminiature Straight PCB Selection Guide D*NG - Straight Pressfit Termination The D*NG is based upon the specification Product Features CECC75-301-802. These connectors provide a low-cost alternative to traditional through hole (cid:1) Quick and easy press-in installation without solder contacts. Utilizing stamped ‘‘Eye of the specialized tooling Needle’’ compliant contact tails per IEC-352-5, the (cid:1) ‘‘Spoon’’ socket contact provides improved parts are quickly and easily mounted onto PCBs interface compared to ‘‘Tuning Fork’’ without soldering, crimping or specialized tooling. (cid:1) Closed-entry socket for secure blind mating The socket contact engaging area utilizes a (cid:1) Front-shell only design based on ‘‘spoon’’ shape with four points of CECC 75-301-802 See pages 4-5. interconnection. Hardware options provide (cid:1) ‘‘Eye of the Needle’’ compliant contact tails flexibility and ensure that the final product fits the (cid:1) Press-in bolt for ground continuity electrical requirements of any application. (cid:1) #4-40 UNC and M3 hardware options D*M Straight Solder Termination (Machined) — Standard PC Tails D*M straight PCB connectors, which are Product Features designed to be equivalent to MIL-C-24308 (except for finishes) for printed circuit boards (cid:1) 7.5 A current capacity and backplanes in demanding applications. (cid:1) Machined contacts Additional contact lengths, hardware and (cid:1) 2 contact finishes finish options available; consult factory for (cid:1) Optional vertical standoffs, screw locks, and details. boardlocks (4 prongs) (cid:1) UL file number E8572 See pages 6-7. (cid:1) Dimensionally compatible with Combo D ZD* - Straight Solder Termination (Stamped) ZD* straight connectors are available for Product Features applications where price is the primary driver. They are available with or without boardlocks and screw (cid:1) Stamped contacts with 5 A current capacity locks. (cid:1) Economical (cid:1) Optional vertical standoffs with optional harpoon style boardlocks or screw locks See pages 8-9. D* - Straight Solder Termination (Machined) — European PC Tails D* straight connectors are available for high Product Features performance uses according to DIN 41652. Available with European length OL contacts. (cid:1) High performance commercial connectors (cid:1) Two contact finish performance classes Select contact finish from 2 performance classes. (cid:1) Optional vertical standoffs, threaded inserts and pushfits/boardlocks (cid:1) OL2 contact length, other lengths available (cid:1) Tin plated contact PC tails (pin & socket) (cid:1) Machined contacts See pages 10-11. D* - Wrap Post Termination D* straight connectors are available for high Product Features performance uses according to DIN 41652. Contacts available in two popular lengths. (cid:1) High performance commercial class connectors (cid:1) Two contact lengths for 2 or 3 wraps (cid:1) Machined contacts See pages 12-13. Dimensions are shown in mm (inch) 2 Dimensions subject to change

D Subminiature Straight PCB Selection Guide Specifications Materials and Finishes Current Rating 5 A / 25°C, 3.5 A / 70°C ambient Description Material Finish Temperature Rating −55°C to 125°C Shell Steel Tin Contact Resistance 10 m(cid:1) Insulator Thermoplastic, UL 94V-0 None (color: black) Test Voltage 1200 Vrms at Sea Level Contact Copper Alloy Gold over Nickel (Standard) XPlated Through Hole 1,09 - 0,94 (.043 - .037) or Gold over PdNi (-408) PC Tail Press-in Force 100N/contact max. Hardware Steel/Copper Alloy Tin/Zinc PC Tail Push-out Force 30N/contact min. PC Board Thickness 3,20 - 1,60 (.125 - .062) Specifications Materials and Finishes Temperature Rating −55°C to 125°C Description Material Finish Current Rating 7.5 A Shell Steel Tin Contact Resistance 55 millivolt max at 7.5 A test current Insulator Thermoplastic, UL 94V-0 None (color: dark green) Dielectric Withstanding Contact Copper Alloy Gold over Nickel. Terminating Voltage 1000 VAC at Sea Level end Tin (Socket only) Hardware Steel/Copper Alloy Tin/Zinc Specifications Materials and Finishes Temperature Rating −55°C to 105°C Description Material Finish Current Rating 5 A Shell Steel Tin Contact Resistance 15 m(cid:1) Insulator Thermoplastic, UL 94-0 None (color: black) Dielectric Withstanding Contacts Copper Alloy Gold over Nickel Voltage 1000 VAC at Sea Level Hardware Steel/Copper Alloy Tin/Zinc Specifications Materials and Finishes Temperature Rating −55°C to 125°C Description Material Finish Current Rating 5 A Shell Steel Tin Contact Resistance 10 m(cid:1) Insulator Thermoplastic, UL 94V-0 None (color: dark green) Dielectric Withstanding Contacts Copper Alloy Gold over Nickel in mating area, Voltage 1250 VAC at Sea Level Tin on balance Hardware Steel/Copper Alloy Tin/Zinc Specifications Materials and Finishes Temperature Rating −55°C to 125°C Description Material Finish Current Rating 5 A Shell Steel Tin Contact Resistance 10 m(cid:1) Insulator Thermoplastic, UL 94V-0 None (color: dark green) Dielectric Withstanding Contact Socket: Copper Alloy Gold over Nickel. Terminating Voltage 1250 VAC at Sea Level end Tin (Socket) Hardware Steel/Copper Alloy Tin/Zinc Dimensions are shown in mm (inch) Dimensions subject to change 3

D Subminiature D*NG Straight Pressfit Termination Plug Part Numbers Shell Through Clinch Nut Clinch Nut Press-In Bolt Press-In Bolt Size Layout Hole # 4-40 UNC M3 # 4-40 UNC M3 DE 9 DENG9P-P1 DENGE9P-P1 DENGX9P-P1 DENGZ9P-P1 DENGL9P-P1 DA 15 DANG15P-P1 DANGE15P-P1 DANGX15P-P1 DANGZ15P-P1 DANGL15P-P1 DB 25 DBNG25P-P1 DBNGE25P-P1 DBNGX25P-P1 DBNGZ25P-P1 DBNGL25P-P1 Selection Guide DC 37 DCNG37P-P1 DCNGE37P-P1 DCNGX37P-P1 DCNGZ37P-P1 DCNGL37P-P1 (cid:1) For Product Features, Specifications, DD 50 DDNG50P-P1 DDNGE50P-P1 DDNGX50P-P1 DDNGZ50P-P1 DDNGL50P-P1 Materials and Finishes, see pages 2-3. Note: For performance class 1(gold over PdNi finish) add -408. Example: DENG9P-P1-408. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. Engaging Face DD Configuration A C 5,69 (.224) B 2,84 (.112) 10° 1 2 3 4 5 6 7 8 E D 9 10 11 12 13 14 15 2,15 (.085) MAX 5,70 ± 0,20 (.224 ± .008) 5,60 (.220) MAX 2,84 (.112) 2,15 (.085) MAX 6,00 - 0,25 (.236 - .010) Dimensions A B C D E Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) Mounting Types Through Hole Clinch Nut Press-In Bolt Dimensions are shown in mm (inch) 4 Dimensions subject to change

D Subminiature D*NG Straight Pressfit Termination Receptacle Part Numbers Shell Through Clinch Nut Clinch Nut Press-In Bolt Press-In Bolt Size Layout Hole # 4-40 UNC M3 # 4-40 UNC M3 DE 9 DENG9S-P1 DENGE9S-P1 DENGX9S-P1 DENGZ9S-P1 DENGL9S-P1 DA 15 DANG15S-P1 DANGE15S-P1 DANGX15S-P1 DANGZ15S-P1 DANGL15S-P1 DB 25 DBNG25S-P1 DBNGE25S-P1 DBNGX25S-P1 DBNGZ25S-P1 DBNGL25S-P1 Selection Guide DC 37 DCNG37S-P1 DCNGE37S-P1 DCNGX37S-P1 DCNGZ37S-P1 DCNGL37S-P1 (cid:1) For Product Features, Specifications, DD 50 DDNG50S-P1 DDNGE50S-P1 DDNGX50S-P1 DDNGZ50S-P1 DDNGL50S-P1 Materials and Finishes, see pages 2-3. Note: For performance class 1(gold over PdNi finish) add -408. Example: DENG9S-P1-408. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. Engaging Face DD Configuration A C 5,69 (.224) B 2,84 (.112) 10° E D 2,15 (.085) MAX 5,70 ± 0,20 (.224 ± .008) 5,60 (.220) MAX 2,84 (.112) 2,15 (.085) MAX 6,00 - 0,25 (.236 - .010) Dimensions A B C D E Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) Mounting Types Through Hole Clinch Nut Press-In Bolt Dimensions are shown in mm (inch) Dimensions subject to change 5

D Subminiature D*M Straight Solder Termination (Machined) — Standard PC Tails Plug Part Numbers Standoff & Standoff, Boardlock & Shell Size Layout Standoff Boardlock Screw Lock DE 9 DEMV9PNK87 DEMZ9PNK87 DEMN9PNK87 DA 15 DAMV15PNK87 DAMZ15PNK87 DAMN15PNK87 DB 25 DBMV25PNK87 DBMZ25PNK87 DBMN25PNK87 DC 37 DCMV37PNK87 DCMZ37PNK87 DCMN37PNK87 DD 50 DDMV50PNK87 DDMZ50PNK87 DDMN50PNK87 Selection Guide (cid:1) For Product Features, Specifications, Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN9PNK127 Materials and Finishes, see pages 2-3. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. DD Configuration Engaging Face 5,69 (.224) A 2,84 C (.112) B POSITION 1 E D L 10° Hardware removed for clarity 2,84 BOARDLOCK Ø 0,76 (.112) 2,92 (.030) 4,52 (.115) (.178) 7,62 ± 0,25 STANDOFF (.300 ± .010) # 4-40 UNC F W (6.2,5506 ±± 0.0,2150) S# C4R-4E0W U NLOCCK Hardware removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 6 Dimensions subject to change

D Subminiature D*M Straight Solder Termination (Machined) — Standard PC Tails Receptacle Part Numbers Standoff & Standoff, Boardlock & Shell Size Layout Standoff Boardlock Screw Lock DE 9 DEMV9SNA197 DEMZ9SNA197 DEMN9SNA197 DA 15 DAMV15SNA197 DAMZ15SNA197 DAMN15SNA197 DB 25 DBMV25SNA197 DBMZ25SNA197 DBMN25SNA197 DC 37 DCMV37SNA197 DCMZ37SNA197 DCMN37SNA197 DD 50 DDMV50SNA197 DDMZ50SNA197 DDMN50SNA197 Selection Guide Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN9SNK126 (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face DD Configuration 5,69 A (.224) 2,84 C (.112) B POSITION 1 E D L 10° Hardware removed for clarity BOARDLOCK 2,84 Ø 0,76 (.112) 2,92 (.030) 4,52 (.115) (.178) STANDOFF # 4-40 UNC 7,62 ± 0,25 (.300 ± .010) F W (6.2,5506 ±± 0.0,2150) S# C4R-4E0W U NLOCCK Hardware removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 7

D Subminiature ZD* Straight Solder Termination (Stamped) Plug Part Numbers Standoff With Shell Size Layout Through Hole Boardlock DE 9 ZDE9P-OL2 ZDEE9P-OL2-146 DA 15 ZDA15P-OL2 ZDAE15P-OL2-146 DB 25 ZDB25P-OL2 ZDBE25P-OL2-146 DC 37 ZDC37P-OL2 ZDCE37P-OL2-146 DD 50 ZDD50P-OL2 ZDDE50P-OL2-146 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B POSITION 1 E D 10° 0,64 (.025) REF 2,84 (.112) 3,18 (.125) 4,32 (.170) MIN REF 6,00 STANDOFF F (.236) # 4-40 UNC W 1,00 (.040) REF Hardware removed for clarity Dimensions A B C D E F W W Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) Dimensions are shown in mm (inch) 8 Dimensions subject to change

D Subminiature ZD* Straight Solder Termination (Stamped) Receptacle Part Numbers Standoff With Shell Size Layout Through Hole Boardlock DE 9 ZDE9S-OL2 ZDEE9S-OL2-146 DA 15 ZDA15S-OL2 ZDAE15S-OL2-146 DB 25 ZDB25S-OL2 ZDBE25S-OL2-146 DC 37 ZDC37S-OL2 ZDCE37S-OL2-146 DD 50 ZDD50S-OL2 ZDDE50S-OL2-146 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B POSITION 1 E D 10° 0,64 (.025) 2,84 REF (.112) 3,18 (.125) 4,32 (.170) MIN REF 6,00 STANDOFF F (.236) # 4-40 UNC W 1,00 (.040) REF Hardware removed for clarity Dimensions A B C D E F W Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) DD 66,93 (2.635) 52,42 (2,064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) Dimensions are shown in mm (inch) Dimensions subject to change 9

D Subminiature D* Straight Solder Termination (Machined) — European PC Tails Plug Part Numbers Standoff #4-40 UNC Standoff M3 With Shell Size Layout Through Hole With Pushfit/Boardlock Pushfit/Boardlock DE 9 DE9P-0L2-K87 DEE9P-0L2-K87-146 DEX9P-0L2-K87-146 DA 15 DA15P-0L2-K87 DAE15P-0L2-K87-146 DAX15P-0L2-K87-146 DB 25 DB25P-0L2-K87 DBE25P-0L2-K87-146 DBX25P-0L2-K87-146 DC 37 DC37P-0L2-K87 DCE37P-0L2-K87-146 DCX37P-0L2-K87-146 Selection Guide (cid:1) For Product Features, Specifications, DD 50 DD50P-0L2-K87 DDE50P-0L2-K87-146 DDX50P-0L2-K87-146 Materials and Finishes, see pages 2-3. Note: For performance class 2 add -A191. Example DA15P-OL2-A191-K87. Reader’s Resource (cid:1) For contact cavity arrangements, PC Tail X Y see page 224. Modifier ±0,30 (.012) ±0,30 (.012) (cid:1) For P.C. hole patterns, see page 274. OL2 5,20 (.205) 10,20 (.401) (cid:1) For panel cutouts, see page 221. OL4 6,75 (.266) 11,80 (.465) (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A 5,69 (.224) C Ø 3,05 (.120) B 2,84 (.112) POSITION 1 E D L 10° Ø 0,60 (.024) X Y 2,84 (.112) F W Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0.25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 10 Dimensions subject to change

D Subminiature D* Straight Solder Termination (Machined) — European PC Tails Receptacle Part Numbers Standoff #4-40 UNC Standoff M3 With Shell Size Layout Through Hole With Pushfit/Boardlock Pushfit/Boardlock DE 9 DE9S-0L2-A197 DEE9S-0L2-A197-146 DEX9S-0L2-A197-146 DA 15 DA15S-0L2-A197 DAE15S-0L2-A197-146 DAX15S-0L2-A197-146 DB 25 DB25S-0L2-A197 DBE25S-0L2-A197-146 DBX25S-0L2-A197-146 DC 37 DC37S-0L2-A197 DCE37S-0L2-A197-146 DCX37S-0L2-A197-146 DD 50 DD50S-0L2-A197 DDE50S-0L2-A197-146 DDX50S-0L2-A197-146 Selection Guide Note: For performance class 2 add -A191. Example DA15S-0L2-A191-A197 (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 2-3. PC Tail X Y Modifier ±0,30 (.012) ±0,30 (.012) Reader’s Resource (cid:1) For contact cavity arrangements, OL2 5,20 (.205) 10,20 (.401) OL4 6,75 (.266) 11,80 (.465) see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A C 5,69 (.224) Ø 3,05 B (.120) 2,84 (.112) POSITION 1 E D L 10° Ø 0,60 (.024) X Y 2,84 (.112) F W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 11

D Subminiature D* Wrap Post Termination Plug Part Numbers Shell Size Layout Through Hole DE 9 DE9P-F179A-K87 DA 15 DA15P-F179A-K87 DB 25 DB25P-F179A-K87 DC 37 DC37P-F179A-K87 DD 50 DD50P-F179A-K87 Selection Guide (cid:1) For Product Features, Specifications, ModCifoicdaetion NuWmrbaeprs of mXax. ±0,89Y (.035) Materials and Finishes, see pages 2-3. F179 2 10,21 (.402) 15,20 (.598) F179A 3 13,61 (.536) 18,60 (.732) Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face DD Configuration 5,69 (.224) A 2,84 (.112) C Ø 3,05 (.120) B POSITION 1 E D L 10° 0,61 (.024) REF 2,84 (.112) X Y F W Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,64 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,64 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,64 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 12 Dimensions subject to change

D Subminiature D* Wrap Post Termination Receptacle Part Numbers Shell Size Layout Through Hole DE 9 DE9S-F179A-A197 DA 15 DA15S-F179A-A197 DB 25 DB25S-F179A-A197 DC 37 DC37S-F179A-A197 DD 50 DD50S-F179A-A197 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 2-3. Modification Number of X Y Reader’s Resource Code Wraps max. ±0,89 (.035) (cid:1) For contact cavity arrangements, F179 2 10,21 (.402) 15,20 (.598) see page 224. F179A 3 13,61 (.536) 18,60 (.732) (cid:1) For P.C. hole patterns, see page 274. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C Ø 3,05 (.120) B POSITION 1 E D L 10° 0,61 (.024) REF 2.84 (.112) X Y F W Dimensions A B C D E F W L Shell Size ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 13

° D Subminiature 90 PCB Selection Guide D*M — 90°Solder Termination (Machined) — Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2) D*M 90° PCB connectors, designed to Product Features be comparable to MIL-C-24308 (except for finishes), for use with printed circuit (cid:1) 7.5 A current capacity boards in demanding applications. (cid:1) Machined contacts Additional contact lengths, hardware and (cid:1) Two contact finishes finish options available; consult factory for (cid:1) Metal bracket with threaded insert standard details. (cid:1) Optional screw locks and boardlocks (cid:1) UL file number E8572 (cid:1) Dimensionally compatible with Combo D See pages 16-17. ZED* — 90°Solder Termination (Stamped) — Standard Footprint .318 inch(cid:2) ZED* 90°connectors are available for applications Product Features where price is the primary driver. They are available with integrated plastic brackets with (cid:1) Stamped contacts with 5 A current capacity Standard footprints. (cid:1) Economical (cid:1) Plastic bracket with integrated boardlocks and grounding strap (cid:1) Optional screw locks See pages 18-19. D* — 90°Solder Termination (Machined) — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) D* 90° connectors are available for high Product Features performance uses according to DIN 41652. Available with European footprint 1AON contacts, (cid:1) High performance commercial class plastic and metal brackets, #4-40 or M3 threads connectors and stamped pushfits/boardlocks. Contact finish (cid:1) Two contact performance classes available in 2 performance classes. (cid:1) Optional metal and plastic brackets, threaded standoffs, clinch nuts, and stamped pushfits/ See pages 20-27. boardlocks (cid:1) Tin plated contact PC tails (pin & socket) ZD* — 90°Solder Termination (Stamped) — European Footprint 10,2 mm(cid:2) ZD* 90°connectors are available for applications Product Features where price is the primary driver. They are available with integrated plastic brackets with (cid:1) Stamped contacts with 5 A current capacity European footprints. (cid:1) Economical (cid:1) Plastic bracket with integrated boardlocks and grounding strap (cid:1) Optional screw locks See pages 28-29. (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 14 Dimensions subject to change

° D Subminiature 90 PCB Selection Guide Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 125°C Shell Steel Tin Current Rating 7.5 A Insulator Thermoplastic, UL 94V-0 None (Color: dark green) Contact Resistance 55 millivolt max. at 7.5 A test Pin Contact Copper Alloy Gold over Nickel current Socket Contact Copper Alloy Gold over Nickel in mating area, Dielectric Tin on balance Withstanding Hardware (except Boardlocks) Steel Tin Voltage 1000 VAC at Sea Level Boardlocks Copper Alloy Tin Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 105°C Shell Steel Tin Current Rating 5 A Insulator Thermoplastic, UL 94V-0 None Contact Resistance 15 m(cid:1) Contacts Copper Alloy Gold over Nickel in mating area, Tin on balance Dielectric Withstanding Voltage 1000 VAC at Sea Level Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to +125°C Shell Steel Tin Current Rating 5 A Insulator Thermoplastic, UL 94V-0 None (Color: dark green) Contact Resistance 10 m(cid:1) Contacts Copper Alloy Gold over Nickel in mating area, Tin on balance Dielectric Withstanding Hardware Steel or Plastic Tin or None Voltage 1250 VAC at Sea Level Boardlocks Copper Alloy Tin Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 105°C Shell Steel Tin Current Rating 5 A Insulator Thermoplastic, UL 94V-0 None Contact Resistance 15 m(cid:1) Contacts Copper Alloy Gold over Nickel in mating area, Tin on balance Dielectric Withstanding Voltage 1000 VAC at Sea Level Dimensions are shown in mm (inch) Dimensions subject to change 15

D Subminiature D*M 90°Solder Termination (Machined) — Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2) Plug Part Numbers Bracket, Bracket & Boardlock & Bracket & Screw Lock Screw Lock Shell Size Layout Bracket Boardlock #4-40 UNC #4-40 UNC DE 9 DEMP9PJK87 DEMCP9PJK87 DEMD9PJK87 DEMG9PJK87 DA 15 DAMP15PJK87 DAMC15PJK87 DAMD15PJK87 DAMG15PJK87 DB 25 DBMP25PJK87 DBMC25PJK87 DBMD25PJK87 DBMG25PJK87 DC 37 DCMP37PJK87 DCMC37PJK87 DCMD37PJK87 DCMG37PJK87 Selection Guide DD 50 DDMP50PJK87 DDMC50PJK87 DDMD50PJK87 DDMG50PJK87 (cid:1) For Product Features, Specifications, Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DAMG15PJK127 Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 272. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. DD Configuration Engaging Face 2,84 A (.112) 4,33 ± 0,38 C 5,68 (.170 ± .015) (.224) B E D 7,18 ± 0,25 2,92 (.283 ± .010) 10° (.115) L Ø 0,76 BOARDLOCK Screw lock and boardlock (.030) removed for clarity BRACKET, 2,84 4,33 ± 0,38 METAL (.112) (.170 ± .015) M RIVNUT N #4-40 UNC 7,18 ± 0,25 (.283 ± .010) F W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock and boardlock removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration. See Reader’s Resource page 226. Dimensions A B C D E F W W L M N Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) 12,34 (.486) 8,64 (.340) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) 12,34 (.486) 8,64 (.340) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 13,74 (.541) 10,06 (.396) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 16 Dimensions subject to change

D Subminiature D*M 90°Solder Termination (Machined) — Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2) Receptacle Part Numbers Bracket, Bracket & Boardlock & Bracket & Screw Lock Screw Lock Shell Size Layout Bracket Boardlock #4-40 UNC #4-40 UNC DE 9 DEMP9SJA197 DEMC9SJA197 DEMD9SJA197 DEMG9SJA197 DA 15 DAMP15SJA197 DAMC15SJA197 DAMD15SJA197 DAMG15SJA197 DB 25 DBMP25SJA197 DBMC25SJA197 DBMD25SJA197 DBMG25SJA197 DC 37 DCMP37SJA197 DCMC37SJA197 DCMD37SJA197 DCMG37SJA197 Selection Guide DD 50 DDMP50SJA197 DDMC50SJA197 DDMD50SJA197 DDMG50SJA197 (cid:1) For Product Features, Specifications, Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DAMG15SJK126 Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 272. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face DD Configuration 2,84 A (.112) 4,33 ± 0,38 5,68 (.170 ± .015) C (.224) B E D 7,18 ± 0,25 (.283 ± .010) L 2,92 10° (.115) Ø 0,76 Screw lock and boardlock BOARDLOCK (.030) removed for clarity BRMAECTKAELT, (2.1,1824) (4.1,3730 ±± 0.0,3185) M RIVNUT N #4-40 UNC 7,18 ± 0,25 (.283 ± .010) F W 6,50 ± 0,25 (.256 ± .010) SC#R4-E4W0 U LNOCCK Screw lock and boardlock removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration. See Reader’s Resource page 226. Dimensions A B C D E F W L M N Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 13,74 (.541) 10,06 (.396) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 17

D Subminiature ZED* 90°Solder Termination (Stamped) — Standard Footprint .318 inch Plug Part Numbers Plastic Bracket, Plastic Bracket, Integrated Grounding Integrated Grounding Strap, Boardlock, Strap, Boardlock, Threaded Insert Screw Lock Shell Size Layout #4-40 UNC #4-40 UNC DE 9 ZEDEL9PBA ZEDE9PBA DA 15 ZEDAL15PBA ZEDA15PBA DB 25 ZEDBL25PBA ZEDB25PBA Selection Guide (cid:1) For Product Features, Specifications, DC 37 ZEDCL37PBA ZEDC37PBA Materials and Finishes, see pages 14-15. Note: For contacts with 30 microinches of gold add -30. Example: ZEDEL9PBA-30 Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 272. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 (.387 - .365) Engaging Face A C 18,45 - 17,69 B 8,61 - 8,11 (.726 - .696) (.339 - .319) 6,09 - 5,59 (.240 - .220) 12,93 - 12,17 4,06 - 3,30 (.509 - .479) (.160 - .130) 10° 2,84 (.112) 8,33 - 7,83 (.328 - .308) 2X GROUNDING HOOK Dimensions A B C Shell Size ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) DE 30,89 (1.216) 16,92 (.666) 24,99 (.984) DA 39,09 (1.539) 25,25 (.994) 33,32 (1.312) DB 53,09 (2.090) 38,96 (1.534) 47,04 (1.852) DC 69,40 (2.732) 55,42 (2.182) 63,50 (2.500) Dimensions are shown in mm (inch) 18 Dimensions subject to change

D Subminiature ZED* 90°Solder Termination (Stamped) — Standard Footprint .318 inch Receptacle Part Numbers Plastic Bracket, Plastic Bracket, Integrated Grounding Integrated Grounding Strap, Boardlock, Strap, Boardlock, Threaded Insert Screw Lock Shell Size Layout #4-40 UNC #4-40 UNC DE 9 ZEDEL9SBA ZEDE9SBA DA 15 ZEDAL15SBA ZEDA15SBA DB 25 ZEDBL25SBA ZEDB25SBA Selection Guide DC 37 ZEDCL37SBA ZEDC37SBA (cid:1) For Product Features, Specifications, Note: For contacts with 30 microinches gold add -30. Example: ZEDEL9SBA-30 Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 272. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 ( .385 - .365) Engaging Face A 18,71 - 17,95 C (.737 - .707) 8,15 - 7,65 (.321 - .301) B 6,35 - 5,85 (.250 - .230) 12,93 - 12,17 (.509 - .479) 4,06 - 3,30 (.160 - .130) 10° 8,33 - 7,83 2,84 (.112) 2X GROUNDING HOOK (.328 - .308) Dimensions A B C Shell Size ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) DE 30,89 (1.216) 16,28 (.641) 24,99 (.984) DA 39,09 (1.539) 24,66 (.971) 33,32 (1.312) DB 53,09 (2.090) 38,38 (1.511) 47,04 (1.852) DC 69,40 (2.732) 54,84 (2.159) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change 19

D Subminiature D* 90°Solder Termination (Machined) — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Shell Size Layout Through Hole DE 9 DE9P-1AON-K87 DA 15 DA15P-1AON-K87 DB 25 DB25P-1AON-K87 DC 37 DC37P-1AON-K87 DD 50 DD50P-1AON-K87 Note: For performance class 2 add -A191. Example: DE9P-1A0N-A191-K87 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A 2,54 (.100) 4,70 (.185) C 5,08 (.200) B Ø 3,05 (.120) E D L 9,40 (.370) 10° Ø 0,60 (.024) 4,70 (.185) 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 20 Dimensions subject to change

D Subminiature D* 90°Solder Termination (Machined) — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Shell Size Layout Through Hole DE 9 DE9S-1AON-A197 DA 15 DA15S-1AON-A197 DB 25 DB25S-1AON-A197 DC 37 DC37S-1AON-A197 DD 50 DD50S-1AON-A197 Note: For performance class 2 add -A191. Example: DE9S-1AON-A191-A197 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 4,70 (.185) 5,08 (.200) C Ø 3,05 (.120) B E D 9,40 (.370) L 10° Ø 0,60 (.024) 2,54 (.100) 4,70 (.185) F W 9,40 (.370) Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 21

D Subminiature D* 90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm Plug Part Numbers Bushing with Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9P-1AFN-K87 DE9P-1A7N-K87 DE9P-1A9N-K87 DE9P-1A8N-K87 DA 15 DA15P-1AFN-K87 DA15P-1A7N-K87 DA15P-1A9N-K87 DA15P-1A8N-K87 DB 25 DB25P-1AFN-K87 DB25P-1A7N-K87 DB25P-1A9N-K87 DB25P-1A8N-K87 DC 37 DC37P-1AFN-K87 DC37P-1A7N-K87 DC37P-1A9N-K87 DC37P-1A8N-K87 DD 50 DD50P-1AFN-K87 DD50P-1A7N-K87 DD50P-1A9N-K87 DD50P-1A8N-K87 Selection Guide (cid:1) For Product Features, Specifications, Notes: For pushfit/boardlock option add -146. Example: DE9P-1AFN-K87-146 Materials and Finishes, see pages 14-15. For performance class 2 add -A191. Example: DE9P-1AFN-A191-K87 Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. DD Configuration Engaging Face 2,54 (.100) 3,70 (.146) 5,08 (.200) 9,40 (.370) L 3,70 (.146) 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0.38 (.015) ±0.25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 22 Dimensions subject to change

D Subminiature D* 90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm Receptacle Part Numbers Bushing with Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9S-1AFN-A197 DE9S-1A7N-A197 DE9S-1A9N-A197 DE9S-1A8N-A197 DA 15 DA15S-1AFN-A197 DA15S-1A7N-A197 DA15S-1A9N-A197 DA15S-1A8N-A197 DB 25 DB25S-1AFN-A197 DB25S-1A7N-A197 DB25S-1A9N-A197 DB25S-1A8N-A197 DC 37 DC37S-1AFN-A197 DC37S-1A7N-A197 DC37S-1A9N-A197 DC37S-1A8N-A197 Selection Guide DD 50 DD50S-1AFN-A197 DD50S-1A7N-A197 DD50S-1A9N-A197 DD50S-1A8N-A197 (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Notes: For pushfit/boardlock option add -146. Example: DE9S-1AFN-A197-146 For performance class 2 add -A191. Example: DE9S-1AFN-A191-A197 Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) 3,70 (.146) 5,08 (.200) 9,40 (.370) L 3,70 (.146) 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 23

D Subminiature D* 90°Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9P-1ADN-K87 DE9P-1AWN-K87 DE9P-1AVN-K87 DE9P-1AJN-K87 DA 15 DA15P-1ADN-K87 DA15P-1AWN-K87 DA15P-1AVN-K87 DA15P-1AJN-K87 DB 25 DB25P-1ADN-K87 DB25P-1AWN-K87 DB25P-1AVN-K87 DB25P-1AJN-K87 DC 37 DC37P-1ADN-K87 DC37P-1AWN-K87 DC37P-1AVN-K87 DC37P-1AJN-K87 DD 50 DD50P-1ADN-K87 DD50P-1AWN-K87 DD50P-1AVN-K87 DD50P-1AJN-K87 Notes: For pushfit/boardlock option add -146. Example: DE9P-1ADN-K87-146 Selection Guide For performance class 2 add -A191. Example: DE9P-1ADN-A191-K87 (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10° Ø 0,60 (.024) BRACKET, PLASTIC, 3,70 (.146) WITH GROUNDING STRAP 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0.38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 24 Dimensions subject to change

D Subminiature D* 90°Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9S-1ADN-A197 DE9S-1AWN-A197 DE9S-1AVN-A197 DE9S-1AJN-A197 DA 15 DA15S-1ADN-A197 DA15S-1AWN-A197 DA15S-1AVN-A197 DA15S-1AJN-A197 DB 25 DB25S-1ADN-A197 DB25S-1AWN-A197 DB25S-1AVN-A197 DB25S-1AJN-A197 DC 37 DC37S-1ADN-A197 DC37S-1AWN-A197 DC37S-1AVN-A197 DC37S-1AJN-A197 DD 50 DD50S-1ADN-A197 DD50S-1AWN-A197 DD50S-1AVN-A197 DD50S-1AJN-A197 Notes: For pushfit/boardlock option add -146. Example: DE9S-1ADN-A197-146 For performance class 2 add -A191. Example: DE9S-1ADN-A191-A197 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10° Ø 0,60 (.024) BRACKET, PLASTIC, 3,70 (.146) WITH GROUNDING 2,54 (.100) STRAP F W 9,40 (.370) Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0.38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 25

D Subminiature D* 90°Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9P-1A5N-K87 DE9P-1AUN-K87 DE9P-1ATN-K87 DE9P-1A6N-K87 DA 15 DA15P-1A5N-K87 DA15P-1AUN-K87 DA15P-1ATN-K87 DA15P-1A6N-K87 DB 25 DB25P-1A5N-K87 DB25P-1AUN-K87 DB25P-1ATN-K87 DB25P-1A6N-K87 DC 37 DC37P-1A5N-K87 DC37P-1AUN-K87 DC37P-1ATN-K87 DC37P-1A6N-K87 DD 50 DD50P-1A5N-K87 DD50P-1AUN-K87 DD50P-1ATN-K87 DD50P-1A6N-K87 Notes: For pushfit/boardlock option add -146. Example: DE9P-1A5N-K87-146 For performance class 2 add -A191. Example: DE9P-1A5N-A191-K87 Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A 2,54 (.100) C 3,70 (.146) 5,08 (.200) B E D 9,40 (.370) L 1,00 (.039) 10° Ø 0,60 (.024) BRACKET, PLASTIC 3,70 (.146) 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 26 Dimensions subject to change

D Subminiature D* 90°Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Captive Nut Captive Nut Post Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC DE 9 DE9S-1A5N-A197 DE9S-1AUN-A197 DE9S-1ATN-A197 DE9S-1A6N-A197 DA 15 DA15S-1A5N-A197 DA15S-1AUN-A197 DA15S-1ATN-A197 DA15S-1A6N-A197 DB 25 DB25S-1A5N-A197 DB25S-1AUN-A197 DB25S-1ATN-A197 DB25S-1A6N-A197 DC 37 DC37S-1A5N-A197 DC37S-1AUN-A197 DC37S-1ATN-A197 DC37S-1A6N-A197 DD 50 DD50S-1A5N-A197 DD50S-1AUN-A197 DD50S-1ATN-A197 DD50S-1A6N-A197 Notes: For push/boardlock option add -146. Example: DE9S-1A5N-A197-146 Selection Guide For performance class 2 add -A191. Example: DE9S-1A5N-A191-A197 (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10° Ø 0,60 (.024) BRACKET, 3,70 (.146) PLASTIC 2,54 (.100) F W 9,40 (.370) Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 27

D Subminiature ZD* 90°Solder Termination (Stamped) — European Footprint 10,2 mm Plug Part Numbers Plastic Bracket, Plastic Bracket, Integrated Grounding Integrated Grounding Strap, Boardlock, Strap, Boardlock, Threaded Insert Screw Lock Shell Size Layout #4-40 UNC #4-40 UNC DE 9 ZDEL9P-1AKN-146 ZDE9P-1AKN-146 DA 15 ZDAL15P-1AKN-146 ZDA15P-1AKN-146 Selection Guide DB 25 ZDBL25P-1AKN-146 ZDB25P-1AKN-146 (cid:1) For Product Features, Specifications, DC 37 ZDCL37P-1AKN-146 ZDC37P-1AKN-146 Materials and Finishes, see pages 14-15. Note: For contacts with 30 microinches gold add -A191. Example: ZDEL9P-1AKN-A191-146 Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 (.387 - .365) Engaging Face A C B 8,61 - 8,11 (.339 - .319) 12,93 - 12,17 (.509 - .479) 1,00 (.039) 10° 2X GROUNDING HOOK Dimensions A B C Shell Size ±0,38 (.015) ±0,25 (.010) ±0,13 (.005) DE 30,89 (1.216) 16,92 (.666) 24,99 (.984) DA 39,09 (1.539) 25,25 (.994) 33,32 (1.312) DB 53,09 (2.090) 38,96 (1.534) 47,04 (1.852) DC 69,40 (2.732) 55,42 (2.182) 63,50 (2.500) Dimensions are shown in mm (inch) 28 Dimensions subject to change

D Subminiature ZD* 90°Solder Termination (Stamped) — European Footprint 10,2 mm Receptacle Part Numbers Plastic Bracket, Plastic Bracket, Integrated Grounding Integrated Grounding Strap, Boardlock, Strap, Boardlock, Threaded Insert Screw Lock Shell Size Layout #4-40 UNC #4-40 UNC DE 9 ZDEL9S-1AKN-146 ZDE9S-1AKN-146 DA 15 ZDAL15S-1AKN-146 ZDA15S-1AKN-146 DB 25 ZDBL25S-1AKN-146 ZDB25S-1AKN-146 DC 37 ZDCL37S-1AKN-146 ZDC37S-1AKN-146 Selection Guide (cid:1) For Product Features, Specifications, Note: For contacts with -A191microinches gold add -A191. Example: ZDEL9S-1AKN-A191-146 Materials and Finishes, see pages 14-15. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For P.C. hole patterns, see page 273. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 ( .385 - .365) Engaging Face A C 8,15 - 7,65 B (.321 - .301) 12,93 - 12,17 (.509 - .479) 1,00 (.039) 10° 2X GROUNDING HOOK Dimensions A B C Shell Size ±0,38 (.015) ±0,25 (.010) ±0,13 (.005) DE 30,89 (1.216) 16,33 (.643) 24,99 (.984) DA 39,09 (1.539) 24,66 (.971) 33,32 (1.312) DB 53,09 (2.090) 38,38 (1.511) 47,04 (1.852) DC 69,40 (2.732) 54,84 (2.159) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change 29

D Subminiature Cable Selection Guide D* — Solder Cup Termination (Machined) with Tin Shells D* solder cup connectors are used for cable or Product Features panel mount wiring applications. Solder cup connectors provide maximum flexibility and (cid:1) Machined solder cup termination, 5 A current performance for applications requiring discrete capacity solder terminations and field repair without (cid:1) High performance commercial class termination tooling. connectors (cid:1) Two contact performance classes (cid:1) Optional clinch nuts with #4-40 UNC or M3 threads See pages 32-33. ZD* — Solder Cup Termination (Stamped) with Tin Shells ZD* solder cup connectors are used for cable or Product Features panel mount wiring applications. Solder cup connectors provide maximum flexibility and (cid:1) Stamped solder cup termination, 5 A current performance for applications requiring discrete capacity solder terminations. (cid:1) Economical See pages 34-35. D*A — Crimp Connectors without Contacts D*A crimp contact connectors are designed for Product Features reliable, fast cabling. Available in the industry standard D*A housing, the connectors provide a (cid:1) Crimp contacts available in reels of 5,000 low-cost, quick cabling alternative compared to (cid:1) Application tooling: soldering. – Hand or automatic – Stripper crimper See pages 36-37. D*W — Discrete Wire IDC The D*W connector provides insulation Product Features displacement connection technology for either solid or stranded wires. With D*W, speed of (cid:1) Quick harnessing capability with simple hand cabling is increased significantly over solder cup or semi-automatic tooling or crimp solutions. Contacts are easily removable (cid:1) Accepts 30 AWG to 20 AWG wire; sizes can and replaceable. Several specialized accessories be mixed (including shield cans, ferrules, and plastic boots) (cid:1) Shield cans insure reliable shielding continuity are available to provide a complete product solution. See pages 38-41. Dimensions are shown in mm (inch) 30 Dimensions subject to change

D Subminiature Cable Selection Guide Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 125°C Shell/Hardware Steel Tin Current Rating 5 A Insulator Thermoplastic, UL 94V-0 None Contact Resistance 10 m(cid:1) Contacts Copper Alloy Gold over Nickel Dielectric Withstanding Voltage 1250 VAC Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 105°C Shell Steel Tin Current Rating 5 A Insulator Thermoplastic, UL 94V-0 None Contact Resistance 15 m(cid:1) Contacts Copper Alloy Gold over Nickel Dielectric Withstanding Voltage 1000 VAC at Sea Level Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 105°C Shell/Hardware Steel Tin Current Rating 5 A (20 AWG) Insulator Thermoplastic, UL 94V-0 None Contact Resistance 15 m(cid:1) Contacts Copper Alloy Gold over Nickel Dielectric Withstanding Voltage 500 VAC at Sea Level Specifications Materials and Finishes Temperature Description Material Finish Rating −55°C to 125°C Shell/Hardware Steel Tin Current Rating 3 A (20 AWG) 2 A (22 AWG) Insulator Thermoplastic, UL 94V-0 None 1,4 A (24 AWG) Contacts Copper Alloy Gold over Nickel in mating area, 1,2 A (26 AWG) Tin on balance 1 A (28 AWG) 0,8 A (30 AWG) Contact Resistance 15 m(cid:1) Dielectric Withstanding Voltage 1000 VAC at Sea Level Dimensions are shown in mm (inch) Dimensions subject to change 31

D Subminiature D* Solder Cup Termination (Machined) with Tin Shells Plug Part Numbers Clinch Nut Clinch Nut Shell Size Layout Through Hole #4-40 UNC M3 DE 9 DE9PK87 DEE9PK87 DEX9PK87 DA 15 DA15PK87 DAE15PK87 DAX15PK87 DB 25 DB25PK87 DBE25PK87 DBX25PK87 DC 37 DC37PK87 DCE37PK87 DCX37PK87 DD 50 DD50PK87 DDE50PK87 DDX50PK87 Selection Guide Note: For performance class 2, add A191. Example: DA15PA191K87. (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A C 5,69 (.224) Ø 3,05 (.120) B 2,84 (.112) POSITION 1 E D L 10° 2,84 (.112) 10,72 (.422) MAX F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 32 Dimensions subject to change

D Subminiature D* Solder Cup Termination (Machined) with Tin Shells Receptacle Part Numbers Clinch Nut Clinch Nut Shell Size Layout Through Hole #4-40 UNC M3 DE 9 DE9SA197 DEE9SA197 DEX9SA197 DA 15 DA15SA197 DAE15SA197 DAX15SA197 DB 25 DB25SA197 DBE25SA197 DBX25SA197 DC 37 DC37SA197 DCE37SA197 DCX37SA197 DD 50 DD50SA197 DDE50SA197 DDX50SA197 Selection Guide Note: For performance class 2, add A191. Example: DA15SA191A197. (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), see page 227. Engaging Face DD Configuration A C 5,69 (.224) Ø 3,05 (.120) B 2,84 (.112) POSITION 1 E D L 10° 2,84 (.112) 9,91 (.390) MAX F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 33

D Subminiature ZD* Solder Cup Termination (Stamped) with Tin Shells Plug Part Numbers Shell Size Layout Through Hole Selection Guide (cid:1) For Product Features, Specifications, DE 9 ZDE9P Materials and Finishes, see pages 30-31. DA 15 ZDA15P DB 25 ZDB25P Reader’s Resource DC 37 ZDC37P (cid:1) For contact cavity arrangements, DD 50 ZDD50P see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face DD Configuration A C 5,69 (.224) B 2,84 (.112) POSITION 1 Ø 3,05 (.120) K E D L 10° 2,84 (.112) 10,72 (.422) MAX F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 34 Dimensions subject to change

D Subminiature ZD* Solder Cup Termination (Stamped) with Tin Shells Receptacle Part Numbers Shell Size Layout Through Hole DE 9 ZDE9S DA 15 ZDA15S DB 25 ZDB25S DC 37 ZDC37S DD 50 ZDD50S Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face DD Configuration A C 5,69 (.224) B 2,84 (.112) Ø 3,05 (.120) POSITION 1 K E D L 10° 2,84 (.112) 10,72 (.422) MAX F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 35

D Subminiature D*A Crimp Connectors without Contacts Plug Part Numbers Shell Size Layout Through Hole DE 9 DEA9PK87FO DA 15 DAA15PK87FO DB 25 DBA25PK87FO DC 37 DCA37PK87FO Note: For crimp (size 20) contacts and tooling, see pages 83 & 275. Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C Ø 3,05 (.120) B POSITION 1 E D 10° 10,93 (.430) K F L W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 36 Dimensions subject to change

D Subminiature D*A Crimp Connectors without Contacts Receptacle Part Numbers Shell Size Layout Through Hole DE 9 DEA9SA197FO DA 15 DAA15SA197FO DB 25 DBA25SA197FO DC 37 DCA37SA197FO Note: For crimp (size 20) contacts and tooling, see pages 83 & 275. Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader’s Resource (cid:1) For contact cavity arrangements, see page 224. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C Ø 3,05 (.120) B POSITION 1 E D 10° 10,93 (.430) K F L W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 37

D Subminiature D*W Discrete Wire IDC Plug Part Numbers Clinch Nut Through Hole Clinch Nut #4-40 UNC Shell Size Layout Through Hole #4-40 UNC & Shield Can Kit & Shield Can Kit DE 9 DEW9P* DEWE9P* DEW9P*G DEWE9P*G DA 15 DAW15P* DAWE15P* DAW15P*G DAWE15P*G DB 25 DBW25P* DBWE25P* DBW25P*G DBWE25P*G DC 37 DCW37P* DCWE37P* DCW37P*G DCWE37P*G Note: *Insert contact type. Example: DEW9P1. For contacts with 0,76 (cid:2)m gold add -A176. Example: DEW9P1-A176. Selection Guide For shield can kit, see page 40. (cid:1) For Product Features, Specifications, Contact Types* Wire Accommodation Materials and Finishes, see pages 30-31. 1 28 AWG/30 AWG 2 22 AWG/26 AWG Reader’s Resource (cid:1) For contact cavity arrangements, 3 20 AWG/22 AWG see page 224. (cid:1) For panel cutouts, see page 221. For more information, see pages 40-41. (cid:1) For hardware views (European), see page 227. Engaging Face A C F 1,33 10° B (.052) G MAX 1 13 E D 7,00 (.276) 14 25 Ø 3,05 (.120) 14,50 L (.571) Rear Face H J Dimensions A B C D E F G H J L Shell Size Layout ±0,38 (.015) ±0,12 (.005) ±0,12 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) max. ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) DEW 9 30,81 (1.213) 16,91 (.666) 24,99 (.984) 8,35 (.329) 12,55 (.494) 10,71 (.422) 6,05 (.238) 19,27 (.759) 10,71 (.422) 0,76 (.030) DAW 15 39,14 (1.541) 25,54 (.994) 33,32 (1.312) 8,35 (.329) 12,55 (.494) 10,71 (.422) 6,05 (.238) 27,50 (1.083) 10,71 (.422) 0,76 (.030) DBW 25 53,03 (2.048) 38,96 (1.534) 47,04 (1.852) 8,35 (.329) 12,55 (.494) 10,82 (.426) 5,99 (.236) 41,27 (1.625) 10,71 (.422) 0,99 (.039) DCW 37 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,35 (.329) 12,55 (.494) 10,82 (.426) 5,99 (.236) 57,70 (2.272) 10,71 (.422) 0,99 (.039) Dimensions are shown in mm (inch) 38 Dimensions subject to change

D Subminiature D*W Discrete Wire IDC Receptacle Part Numbers Clinch Nut Through Hole Clinch Nut #4-40 UNC Shell Size Layout Through Hole #4-40 UNC & Shield Can Kit & Shield Can Kit DE 9 DEW9S* DEWE9S* DEW9S*G DEWE9S*G DA 15 DAW15S* DAWE15S* DAW15S*G DAWE15S*G DB 25 DBW25S* DBWE25S* DBW25S*G DBWE25S*G DC 37 DCW37S* DCWE37S* DCW37S*G DCWE37S*G Note: *Insert contact type. Example: DEW9S1. For contacts with 0,76 (cid:2)m gold add -A176. Example: DEW9S1-A176. For shield can kit, see page 40. Selection Guide (cid:1) For Product Features, Specifications, Materials and Finishes, see pages 30-31. Contact Types* Wire Accommodation 1 28 AWG/30 AWG Reader’s Resource (cid:1) For contact cavity arrangements, 2 22 AWG/26 AWG 3 20 AWG/22 AWG see page 224. (cid:1) For panel cutouts, see page 221. For more information, see pages 40-41. (cid:1) For hardware views (European), see page 227. Engaging Face A F C 1,20 10° B (.047) G MAX 13 1 E D 7,00 (.276) 25 14 Ø 3,05 (.120) 14,50 L (.571) Rear Face H J Dimensions A B C D E F G H J L Shell Size Layout ±0,38 (.015) ±0,12 (.005) ±0,12 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) max. ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) DEW 9 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 19,27 (.759) 10,71 (.422) 0,76 (.030) DAW 15 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 27,50 (1.083) 10,71 (.422) 0,76 (.030) DBW 25 53,03 (2.048) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 41,27 (1.625) 10,71 (.422) 0,76 (.030) DCW 37 69,32 (2.729) 55,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 57,70 (2.272) 10,71 (.422) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 39

D Subminiature D*W Shield Can Kit Ferrule Ferrule Ferrule Crimp Tool Crimp Tool D*W XCable XA Part Number Part Number Position DEW9G 4,8-5,5 6,25 (.246) 304-8810-000 D115433-1 B 5,5-6,2 6,25 (.246) 304-8810-000 D115433-1 A 6,2-7,2 8,20 (.323) 304-8811-000 D115433-2 B 7,2-8,2 8,20 (.323) 304-8811-000 D115433-2 A 8,2-9,5 11,50 (.452) 304-8812-000 D115433-3 B 9,5-11,1 11,50 (.452) 304-8813-000 D115433-3 A DBW25G 4,8-5,5 6,25 (.246) 304-8810-000 D115433-1 B 5,5-6,2 6,25 (.246) 304-8810-000 D115433-1 A Materials and Finishes 6,2-7,2 8,20 (.323) 304-8811-000 D115433-2 B Shield Can and Ferrule 7,2-8,2 8,20 (.323) 304-8811-000 D115433-2 A Material: Steel 8,2-9,5 11,50 (.452) 304-8812-000 D115433-3 B Finish: Tin 9,5-11,1 11,50 (.452) 304-8813-000 D115433-3 A 38,80(1.528) FERRULE, MUST WIRES 32,60(1.283) BE PURCHASED BRAID 16,70 SEPARATELY. FERRULE (.657) FERRULE CABLE CABLE 39,80 (1.567) 60° 35,00 (1.378) Ø10,00 (.394) 10,10 (.398) Ferrule Wire Trim Dimensions Crimp Tool Positions 11,25(.443) Ø 11,10(.437) Ø A 10,00(.394) 50,00 (1.969) Dimensions are shown in mm (inch) 40 Dimensions subject to change

D Subminiature D*W Discrete Wire IDC Contacts Contacts Contact Types 1 2 3 Pin 330-8753-101 330-8753-102 330-8753-103 Socket 330-8754-101 330-8754-102 330-8754-103 Solid Cable Wire Size 28 AWG 30 AWG 22 AWG 24 AWG 26 AWG 20 AWG 22 AWG Section mm2 0.08 0.05 0.34 0.22 0.12 0.60 0.34 Internal dia. mm max 0.32 0.26 0.62 0.51 0.40 0.88 0.62 External dia. mm max 1.30 1.20 1.45 1.45 1.40 1.45 1.45 Stranded Cable Wire Size 28 AWG 30 AWG 22 AWG 24 AWG 26 AWG 20 AWG 22 AWG Section mm2 0.09 0.05 0.34 0.22 0.12 0.60 0.34 Composition 7 x 0.13 7 x 0.10 7 x 0.25 7 x 0.20 7 x 0.15 19 x 0.20 7 x 0.25 Internal cable dia. mm max 0.40 0.30 0.75 0.60 0.45 0.97 0.75 External wire dia. mm max 1.30 1.20 1.45 1.45 1.40 1.45 1.45 Insulation Displacement Connection Concept Tooling Extraction Tool Hand Crimp Tool Row by Row Pneumatic Press Part Number Part Number Part Number DW115394 Standard Tool: DW115394-1 DW115394-501 Automatic Tool: DW115394-2 Tool Support: DW115394-20 Dimensions are shown in mm (inch) Dimensions subject to change 41

D Subminiature Combo D Selection Index Page Combo D An Introduction........................................................43 Combo DPCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option) Coaxial 90°— Standard Footprint .318(cid:2)or .283(cid:2)(cid:2)inch (Sizes DE-DC)...........44 Coaxial 90°— Standard Footprint .489(cid:2)or .454(cid:2)(cid:2)inch (Size DD) ..............46 13C3 Special — Receptacle Only.........................................48 3C3 Shielded Special — Receptacle Only...................................49 Coaxial 90°— European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm (Sizes DE-DC)............50 Coaxial Straight — Standard PC Tails (Sizes DE-DC) ..........................52 Coaxial Straight — Standard PC Tails (Size DD)..............................54 Coaxial Straight — European PC Tails (Sizes DE-DC)..........................56 Coaxial Straight — European PC Tails (Size DD)..............................58 Combo DPCB Connectors with High Power Contacts 40 A High Power 90°— Standard Footprint .489(cid:2)or .454(cid:2)(cid:2)inch (Sizes DE-DC)...60 40 A High Power 90°— Standard Footprint .489(cid:2)or .454(cid:2)(cid:2)inch (Size DD).......62 40 A High Power 90°— European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm (Sizes DE-DC) ....64 40 A High Power Straight — Standard PC Tails (Sizes DE-DC)...................66 40 A High Power Straight — Standard PC Tails (Size DD).......................68 40 A High Power Straight — European PC Tails (Sizes DE-DC)...................70 40 A High Power Straight — European PC Tails (Size DD)......................72 Combo DPCB Connectors with (Size 20) Signal Contacts Only 90°— European Footprint 10,2(cid:2)or 9,4(cid:2)(cid:2)mm (Sizes DE-DD)..................74 Straight PC Tails — European (Sizes DE-DD)................................76 Solder Cup (Sizes DE-DD)..............................................78 Combo DPCB Crimp Connectors without Contacts (Sizes DA-DD)................80 Loose Contacts and Tooling Shield Cans and Crimp Tooling...........................................82 Crimp (Size 20) Contacts and Tooling .....................................83 Cable (Size 8) Loose Contacts Coaxial 75 Ohm and Tooling — Straight Stamped Crimp/Crimp.................84 Coaxial 75 Ohm and Tooling — 90°Crimp Braid/Solder Center Contact ..........85 Coaxial 50 Ohm — Straight Crimp or Solder Braid ..........................86 Coaxial 50 Ohm — 90°Crimp or Solder Braid .............................87 Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts and Tooling .......................88 Coaxial Assembly Instructions and Crimp Tooling...........................89 High Power and Tooling — Straight Solder or Crimp.........................90 High Voltage — Straight / 90°..........................................91 PCB (Size 8) Loose Contacts Coaxial 75 Ohm — Straight / 90°.......................................92 High Power — Straight / 90° ..........................................93 High Voltage — Straight..............................................94 PCB Guide Pin and Socket..............................................95 (cid:2)Connector footprint measured from front shell. (cid:2)(cid:2)Connector footprint measured from rear shell. Dimensions are shown in mm (inch) 42 Dimensions subject to change

D Subminiature Combo D Combination D Subminiature connectors offer the advantages of an industry standard shield I/O interconnect, with the flexibility of a customized special, designed for any application. This connector system is ideal for applications that require optimization of space while improving overall shielding. Combo Daccomplishes this by combining multiple interconnect types into one fully shielded product, decreasing the number I/O interfaces and reducing the possibility of EMI/RFI leakage. By continually investing in engineering and manufacturing technology, ITT Cannon has improved the performance and features of this popular product. This catalog contains our latest efforts to meet the global requirements of the commercial electronics industry with a flexible, reliable and cost effective connector solution. Applications Product Features (cid:1) 90°or Straight PCB (cid:1) Video Coaxial Transmission (75 (cid:1)) (cid:1) Standard and European Footprints (cid:1) PC Boards up to 3,2 (.125) Thick (cid:1) RF and Telecom Transmission (50 (cid:1)) (cid:1) Pre-Installed 75 (cid:1)/50 (cid:1)Coaxial or High (cid:1) PCB Variants Available with Boardlocks and/or (cid:1) Power Interconnects (Up to 40 A) Power contacts (One Part Number) Screw Locks (#4-40 or M3) (cid:1) Vertical Standoffs or 90°Brackets Specifications Temperature Rating −55°C to 125°C Coaxial VSWR Less than 1.30 +.03F for F up to 500 MHz Signal Contact Current Rating 7.5 A current capacity Coaxial Insertion Loss .3dB loss at 500 MHz Signal Contact Resistance 55 millivolt max. at 7.5 test current High Power Current Rating Up to 40 A Signal Contact High Power Dielectric Withstanding Voltage 1250 VAC at Sea Level Dielectric Withstanding Voltage 1000 VAC at Sea Level Coaxial Current Rating 5 A High Voltage Current Rating 5 A Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level High Voltage Contact Coaxial Impedance 75 (cid:1)or 50 (cid:1) Dielectric Withstanding Voltage 2800 V at Sea Level Materials and Finishes Connector Assembly Description Material Finish/Treatment Shell Steel Tin Insulator Black Polyester, UL 94V-0 None Pin Contact Copper Alloy Gold over Nickel Socket Contact Copper Alloy Gold over Nickel in mating area, Tin on balance Standoff Stainless Steel Passivated Bracket Steel Tin Rivnut Steel Tin Boardlock Copper Alloy Tin Coaxial/High Power/High Voltage Contact Assemblies Contacts and outer shells Copper Alloy Gold over Nickel (Tin on coax ground PC tails) Ring, Retaining Copper Alloy Nickel Insulator (Coaxial only) Teflon None Insulator (High Voltage only) Thermoplastic None U.L. File Number: E8572 Dimensions are shown in mm (inch) Dimensions subject to change 43

D Subminiature Combo D Coaxial 90°— Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2)(Sizes DE-DC) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5C1PJK87 DEMC5C1PJK87 DEMD5C1PJK87 DEMG5C1PJK87 DA 7W2 DAMP7C2PJK87 DAMC7C2PJK87 DAMD7C2PJK87 DAMG7C2PJK87 DA 11W1 DAMP11C1PJK87 DAMC11C1PJK87 DAMD11C1PJK87 DAMG11C1PJK87 DA 3W3 DAMP3C3PJK87 DAMC3C3PJK87 DAMD3C3PJK87 DAMG3C3PJK87 DA 3WK3(cid:2) DAMP3CK3PJK87TM DAMC3CK3PJK87TM DAMD3CK3PJK87TM DAMG3CK3PJK87TM DB 5W5 DBMP5C5PJK87 DBMC5C5PJK87 DBMD5C5PJK87 DBMG5C5PJK87 Reader’s Resource DB 9W4 DBMP9C4PJK87 DBMC9C4PJK87 DBMD9C4PJK87 DBMG9C4PJK87 (cid:1) For contact cavity arrangements, DB 13W3 DBMP13C3PJK87 DBMC13C3PJK87 DBMD13C3PJK87 DBMG13C3PJK87 see page 222. DB 17W2 DBMP17C2PJK87 DBMC17C2PJK87 DBMD17C2PJK87 DBMG17C2PJK87 (cid:1) For P.C. hole patterns, see pages 228-229. DB 21W1 DBMP21C1PJK87 DBMC21C1PJK87 DBMD21C1PJK87 DBMG21C1PJK87 (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. DC 8W8 DCMP8C8PJK87 DCMC8C8PJK87 DCMD8C8PJK87 DCMG8C8PJK87 (cid:1) For alternate bracket configuration (when DC 13W6 DCMP13C6PJK87 DCMC13C6PJK87 DCMD13C6PJK87 DCMG13C6PJK87 DC 17W5 DCMP17C5PJK87 DCMC17C5PJK87 DCMD17C5PJK87 DCMG17C5PJK87 connectors are supplied without boardlocks), see page 226. DC 21WA4 DCMP21CA4PJK87 DCMC21CA4PJK87 DCMD21CA4PJK87 DCMG21CA4PJK87 (cid:1) For alternate 50 Ohm coaxial configuration, DC 25W3 DCMP25C3PJK87 DCMC25C3PJK87 DCMD25C3PJK87 DCMG25C3PJK87 see page 225. DC 27W2 DCMP27C2PJK87 DCMC27C2PJK87 DCMD27C2PJK87 DCMG27C2PJK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PJK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5C1PJK127 For DD shell sizes, see page 46. (cid:2)Keyed. 0,56 (.023) Engaging Face Ø 0,51 (.020) 3,89 (.153) A 2,54 MIN C (.100) B 11,94 ± 0,33 (.470 ± .013) E D L BOARDLOCK Screw lock, boardlock, and signal contacts 10° removed for clarity 2,92 Ø 0,76 0,82 (.115) (.030) (.032) 4,33 ± 0,38 2,84 (.170 ± .015) (.112) BRACKET, METAL 12,34 (.486) 8,64 RIVNUT 7,18 ± 0,25 (.340) #4-40 UNC (.283 ± .010) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and coaxial contact #4-40 UNC removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 44 Dimensions subject to change

D Subminiature Combo D Coaxial 90°— Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2)(Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5C1SJA197 DEMC5C1SJA197 DEMD5C1SJA197 DEMG5C1SJA197 DA 7W2 DAMP7C2SJA197 DAMC7C2SJA197 DAMD7C2SJA197 DAMG7C2SJA197 DA 11W1 DAMP11C1SJA197 DAMC11C1SJA197 DAMD11C1SJA197 DAMG11C1SJA197 DA 3W3 DAMP3C3SJA197 DAMC3C3SJA197 DAMD3C3SJA197 DAMG3C3SJA197 DA 3WK3(cid:2) DAMP3CK3SJA197TM DAMC3CK3SJA197TM DAMD3CK3SJA197TM DAMG3CK3SJA197TM DB 5W5 DBMP5C5SJA197 DBMC5C5SJA197 DBMD5C5SJA197 DBMG5C5SJA197 Reader’s Resource DB 9W4 DBMP9C4SJA197 DBMC9C4SJA197 DBMD9C4SJA197 DBMG9C4SJA197 (cid:1) For contact cavity arrangements, DB 13W3 DBMP13C3SJA197 DBMC13C3SJA197 DBMD13C3SJA197 DBMG13C3SJA197 see page 223. DB 17W2 DBMP17C2SJA197 DBMC17C2SJA197 DBMD17C2SJA197 DBMG17C2SJA197 (cid:1) For P.C. hole patterns, see pages 231-232. DB 21W1 DBMP21C1SJA197 DBMC21C1SJA197 DBMD21C1SJA197 DBMG21C1SJA197 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMP8C8SJA197 DCMC8C8SJA197 DCMD8C8SJA197 DCMG8C8SJA197 (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when DC 13W6 DCMP13C6SJA197 DCMC13C6SJA197 DCMD13C6SJA197 DCMG13C6SJA197 DC 17W5 DCMP17C5SJA197 DCMC17C5SJA197 DCMD17C5SJA197 DCMG17C5SJA197 connectors are supplied without boardlocks), DC 21WA4 DCMP21CA4SJA197 DCMC21CA4SJA197 DCMD21CA4SJA197 DCMG21CA4SJA197 see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, DC 25W3 DCMP25C3SJA197 DCMC25C3SJA197 DCMD25C3SJA197 DCMG25C3SJA197 see page 225. DC 27W2 DCMP27C2SJA197 DCMC27C2SJA197 DCMD27C2SJA197 DCMG27C2SJA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SJA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEMP5C1SJK126 For DD Shell Sizes, see page 47. (cid:2)Keyed. 0,56 (.023) Engaging Face Ø 0,51 3,89 (.153) A (.020) MIN 2,54 C (.100) B 11,94 ± 0,33 (.470 ± .013) E D L 2,92 Screw lock, boardlock and signal contacts BOARDLOCK 10° Ø 0,76 0,79 (.115) removed for clarity (.030) (.031) 2,84 4,33 ± 0,38 (.112) (.170 ± .015) BRACKET, METAL 12,34 (.486) 8,64 #4R-I4V0N UUNTC 7,18 ± 0,25 (.340) (.283 ± .010) F W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock and coaxial contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, See Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47.04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 45

D Subminiature Combo D Coaxial 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Size DD) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMP24C7PJK87 DDMC24C7PJK87 DDMD24C7PJK87 DDMG24C7PJK87 DD 36W4 DDMP36C4PJK87 DDMC36C4PJK87 DDMD36C4PJK87 DDMG36C4PJK87 DD 43W2 DDMP43C2PJK87 DDMC43C2PJK87 DDMD43C2PJK87 DDMG43C2PJK87 DD 47W1 DDMP47C1PJK87 DDMC47C1PJK87 DDMD47C1PJK87 DDMG47C1PJK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4PJK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24C7PJK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 230. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK 6,50 ± 0,25 #4-40 UNC (.256 ± .010) W F (1.415,543 ± ± . 001,205) RIVNUT (1.309,066) (1.534,714) #4-40 UNC 5,68 (.224) 4,33 ± 0,38 BRACKET, 2,84 (.170 ± .015) METAL (.112) Screw lock, boardlock, and coaxial contacts removed for clarity 10° Engaging Face L 11,94 ± 0,33 E D (.470 ± .013) 2,54 (.100) Ø 0,51 2,92 (.020) BOARDLOCK 0,82 Ø 0,76 (.115) 3,89 (.153) (.032) (.030) 0,56 MIN (.023) B C Screw lock, boardlock, and signal contacts A removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, See Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 46 Dimensions subject to change

D Subminiature Combo D Coaxial 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Size DD) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMP24C7SJA197 DDMC24C7SJA197 DDMD24C7SJA197 DDMG24C7SJA197 DD 36W4 DDMP36C4SJA197 DDMC36C4SJA197 DDMD36C4SJA197 DDMG36C4SJA197 DD 43W2 DDMP43C2SJA197 DDMC43C2SJA197 DDMD43C2SJA197 DDMG43C2SJA197 DD 47W1 DDMP47C1SJA197 DDMC47C1SJA197 DDMD47C1SJA197 DDMG47C1SJA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4SJA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24C7SJK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 233. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK 6,50 ± 0,25 #4-40 UNC (.256 ± .010) W F 11,53 ± 0,25 10,06 (.454 ± .010) (.396) 13,74 (.541) RIVNUT 5,68 #4-40 UNC (.224) BRACKET, 2,84 (.112) (4.1,3730 ±± 0.0,3185) METAL Screw lock, boardlock, and coaxial contact removed for clarity Engaging Face 10° L D 2,54 11,94 ± 0,33 E (.100) (.470 ± .013) 2,92 0,82 Ø 0,76 BOARDLOCK (.115) (.032) (.030) Ø 0,51 3,89 (.153) (.020) MIN B 0,56 C (.023) Screw lock, boardlock, and signal contacts A removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, See Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 47

D-Subminiature Combo D 13C3 Special — Receptacle only Receptacle Finishes Part Number Signal and Coaxial DB111949-43 Center Contact Finish: 30 (cid:2)inches Gold. Note: For additional materials and finishes, see introduction page 43. Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 236 (Rear shell REF. is 0,76 (.030) from front shell). (cid:1) For panel cutouts, see page 221. Engaging Face 53,15 ± 0,35 (2.095 ± .014) 47,04 (1.852) 38,38 6,13 ± 0,13 (1.510) (.241 ± .005) 6,27 ± 0,25 12,91(.508) 7,87(.310) A1 1 A2 A3 (.247 ± .010) MAX 6 2,90 ± 0,21 10,17 (.400) (2.1,8100 ±± 0.0,2150) 10° BOARDLOCK (.114 ± .008) (SIGNAL AND COAX) 12,71 (.500) (SIGNAL AND COAX) 15,25 (.600) (COAX ONLY) Dimensions are shown in mm (inch) 48 Dimensions subject to change

D Subminiature Combo D 3C3 Shielded Special — Receptacle only Receptacle Materials and Finishes Part Number Body Material: Zinc DAM53512-1405 Body Finish: Tin Coaxial Center Contact Finish: 30 (cid:2)inches Gold Note: For additional materials and finishes, see introduction page 43. Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 231. (cid:1) For panel cutouts, see page 221. Engaging Face A C B E D 0,56 (.023) 10° Ø 0,51 (.020) 2,54 4,19 - 2,79 (.100) (.165 - .110) 12,12 12,62 (.477) (.497) F 9,37 (.369) W Note: Connector supplied with boardlocks. Dimensions A B C D E F W Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,17 (.243) Dimensions are shown in mm (inch) Dimensions subject to change 49

D Subminiature Combo D Coaxial 90°— European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DC) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5C1PVK87 DEMC5C1PVK87 DEMD5C1PVK87 DEMG5C1PVK87 DA 7W2 DAMP7C2PVK87 DAMC7C2PVK87 DAMD7C2PVK87 DAMG7C2PVK87 DA 11W1 DAMP11C1PVK87 DAMC11C1PVK87 DAMD11C1PVK87 DAMG11C1PVK87 DA 3W3 DAMP3C3PVK87 DAMC3C3PVK87 DAMD3C3PVK87 DAMG3C3PVK87 DA 3WK3(cid:2) DAMP3CK3PVK87TM DAMC3CK3PVK87TM DAMD3CK3PVK87TM DAMG3CK3PVK87TM DB 5W5 DBMP5C5PVK87 DBMC5C5PVK87 DBMD5C5PVK87 DBMG5C5PVK87 Reader’s Resource DB 9W4 DBMP9C4PVK87 DBMC9C4PVK87 DBMD9C4PVK87 DBMG9C4PVK87 (cid:1) For contact cavity arrangements, DB 13W3 DBMP13C3PVK87 DBMC13C3PVK87 DBMD13C3PVK87 DBMG13C3PVK87 see page 222. DB 17W2 DBMP17C2PVK87 DBMC17C2PVK87 DBMD17C2PVK87 DBMG17C2PVK87 (cid:1) For P.C. hole patterns, see page 234-235. DB 21W1 DBMP21C1PVK87 DBMC21C1PVK87 DBMD21C1PVK87 DBMG21C1PVK87 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMP8C8PVK87 DCMC8C8PVK87 DCMD8C8PVK87 DCMG8C8PVK87 (cid:1) For alternate bracket configuration (when DC 13W6 DCMP13C6PVK87 DCMC13C6PVK87 DCMD13C6PVK87 DCMG13C6PVK87 connectors are supplied without boardlocks), DC 17W5 DCMP17C5PVK87 DCMC17C5PVK87 DCMD17C5PVK87 DCMG17C5PVK87 see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, DC 21WA4 DCMP21CA4PVK87 DCMC21CA4PVK87 DCMD21CA4PVK87 DCMG21CA4PVK87 see page 225. DC 25W3 DCMP25C3PVK87 DCMC25C3PVK87 DCMD25C3PVK87 DCMG25C3PVK87 DC 27W2 DCMP27C2PVK87 DCMC27C2PVK87 DCMD27C2PVK87 DCMG27C2PVK87 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PVK87 For tin plated PC tails add A226 (signal contacts only). Example: DEMP5C1PVK87A226 For performance class 2 substitute K127 for K87. Example: DEMP5C1PVK127 For DD shell sizes (Standard footprint) see page 46. (cid:2)Keyed. Engaging Face 0,56 (.023) 2,89 (.113) MIN A Ø 0,51 C (.020) B 2,54 (.100) 11,94 ± 0,33 E D (.470 ± .013) 1,00 (.039) L 2,92 10° (.115) BOARDLOCK Ø 0,60 0,82 Screw lock, boardlock, and signal contacts (.024) (.032) removed for clarity 2,54 4,00 (.157) (.100) BRACKET, METAL 14,55 (.573) 10,85 9,40 ± 0,20 (.427) RIVNUT (.370 ± .008) #4-40 UNC F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and coaxial contact #4-40 UNC removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 50 Dimensions subject to change

D Subminiature Combo D Coaxial 90°— European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5C1SVA197 DEMC5C1SVA197 DEMD5C1SVA197 DEMG5C1SVA197 DA 7W2 DAMP7C2SVA197 DAMC7C2SVA197 DAMD7C2SVA197 DAMG7C2SVA197 DA 11W1 DAMP11C1SVA197 DAMC11C1SVA197 DAMD11C1SVA197 DAMG11C1SVA197 DA 3W3 DAMP3C3SVA197 DAMC3C3SVA197 DAMD3C3SVA197 DAMG3C3SVA197 DA 3WK3(cid:2) DAMP3CK3SVA197TM DAMC3CK3SVA197TM DAMD3CK3SVA197TM DAMG3CK3SVA197TM DB 5W5 DBMP5C5SVA197 DBMC5C5SVA197 DBMD5C5SVA197 DBMG5C5SVA197 DB 9W4 DBMP9C4SVA197 DBMC9C4SVA197 DBMD9C4SVA197 DBMG9C4SVA197 Reader’s Resource DB 13W3 DBMP13C3SVA197 DBMC13C3SVA197 DBMD13C3SVA197 DBMG13C3SVA197 (cid:1) For contact cavity arrangements, DB 17W2 DBMP17C2SVA197 DBMC17C2SVA197 DBMD17C2SVA197 DBMG17C2SVA197 see page 223. DB 21W1 DBMP21C1SVA197 DBMC21C1SVA197 DBMD21C1SVA197 DBMG21C1SVA197 (cid:1) For P.C. hole patterns, see pages 236-237. DC 8W8 DCMP8C8SVA197 DCMC8C8SVA197 DCMD8C8SVA197 DCMG8C8SVA197 (cid:1) For panel cutouts, see page 221. DC 13W6 DCMP13C6SVA197 DCMC13C6SVA197 DCMD13C6SVA197 DCMG13C6SVA197 (cid:1) For alternate bracket configuration (when DC 17W5 DCMP17C5SVA197 DCMC17C5SVA197 DCMD17C5SVA197 DCMG17C5SVA197 connectors are supplied without boardlocks), DC 21WA4 DCMP21CA4SVA197 DCMC21CA4SVA197 DCMD21CA4SVA197 DCMG21CA4SVA197 see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, DC 25W3 DCMP25C3SVA197 DCMC25C3SVA197 DCMD25C3SVA197 DCMG25C3SVA197 DC 27W2 DCMP27C2SVA197 DCMC27C2SVA197 DCMD27C2SVA197 DCMG27C2SVA197 see page 225. For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SVA197 For performance class 2 substitute K126 for A197. Example: DEMP5C1SVK126 For DD shell sizes (standard footprint) see page 47. (cid:2)Keyed. 0,56 Engaging Face (.023) A Ø 0,51 (.020) 2,89 (.113) MIN C 2.54 B (.100) 11,94 ± 0,33 E D (.470 ± .013) 1,00 (.039) L 10° 2,92 BOARDLOCK Ø 0,60 0,82 (.115) Screw lock, boardlock, and signal contacts (.024) (.032) removed for clarity 2,54 4,00 (.157) (.100) BRACKET, METAL 14,55 (.573)(1.042,875) #4R-I4V0N UUNTC (9.3,4700 ±± 0.0,2008) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and coaxial contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 51

D Subminiature Combo D Coaxial Straight — Standard PC Tails (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5C1PNK87 DEMZ5C1PNK87 DEMN5C1PNK87 DA 7W2 DAMV7C2PNK87 DAMZ7C2PNK87 DAMN7C2PNK87 DA 11W1 DAMV11C1PNK87 DAMZ11C1PNK87 DAMN11C1PNK87 DA 3W3 DAMV3C3PNK87 DAMZ3C3PNK87 DAMN3C3PNK87 DA 3WK3(cid:2) DAMV3CK3PNK87TM DAMZ3CK3PNK87TM DAMN3CK3PNK87TM DB 5W5 DBMV5C5PNK87 DBMZ5C5PNK87 DBMN5C5PNK87 DB 9W4 DBMV9C4PNK87 DBMZ9C4PNK87 DBMN9C4PNK87 Reader’s Resource DB 13W3 DBMV13C3PNK87 DBMZ13C3PNK87 DBMN13C3PNK87 (cid:1) For contact cavity arrangements, DB 17W2 DBMV17C2PNK87 DBMZ17C2PNK87 DBMN17C2PNK87 see page 222. (cid:1) For P.C. hole patterns, see pages 238-239. DB 21W1 DBMV21C1PNK87 DBMZ21C1PNK87 DBMN21C1PNK87 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMV8C8PNK87 DCMZ8C8PNK87 DCMN8C8PNK87 (cid:1) For alternate 50 Ohm coaxial configuration, DC 13W6 DCMV13C6PNK87 DCMZ13C6PNK87 DCMN13C6PNK87 see page 225. DC 17W5 DCMV17C5PNK87 DCMZ17C5PNK87 DCMN17C5PNK87 DC 21WA4 DCMV21CA4PNK87 DCMZ21CA4PNK87 DCMN21CA4PNK87 DC 25W3 DCMV25C3PNK87 DCMZ25C3PNK87 DCMN25C3PNK87 DC 27W2 DCMV27C2PNK87 DCMZ27C2PNK87 DCMN27C2PNK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PNK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN5C1PNK127 For DD shell sizes, see page 54. (cid:2)Keyed. Engaging Face Ø 0,51 A 2,54 (.020) (.100) 0,62 C (.024) B E D L 10° Screw lock, boardlock, and signal contacts removed for clarity Ø 0,76 BOARDLOCK (.030) 0,82 3,45 (.136) (.032) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and coaxial contact removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 52 Dimensions subject to change

D Subminiature Combo D Coaxial Straight — Standard PC Tails (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5C1SNA197 DEMZ5C1SNA197 DEMN5C1SNA197 DA 7W2 DAMV7C2SNA197 DAMZ7C2SNA197 DAMN7C2SNA197 DA 11W1 DAMV11C1SNA197 DAMZ11C1SNA197 DAMN11C1SNA197 DA 3W3 DAMV3C3SNA197 DAMZ3C3SNA197 DAMN3C3SNA197 DA 3WK3(cid:2) DAMV3CK3SNA197TM DAMZ3CK3SNA197TM DAMN3CK3SNA197TM DB 5W5 DBMV5C5SNA197 DBMZ5C5SNA197 DBMN5C5SNA197 DB 9W4 DBMV9C4SNA197 DBMZ9C4SNA197 DBMN9C4SNA197 Reader’s Resource DB 13W3 DBMV13C3SNA197 DBMZ13C3SNA197 DBMN13C3SNA197 (cid:1) For contact cavity arrangements, DB 17W2 DBMV17C2SNA197 DBMZ17C2SNA197 DBMN17C2SNA197 see page 223. DB 21W1 DBMV21C1SNA197 DBMZ21C1SNA197 DBMN21C1SNA197 (cid:1) For P.C. hole patterns, see pages 241-242. (cid:1) For panel cutouts, see page 221. DC 8W8 DCMV8C8SNA197 DCMZ8C8SNA197 DCMN8C8SNA197 (cid:1) For alternate 50 Ohm coaxial configuration, DC 13W6 DCMV13C6SNA197 DCMZ13C6SNA197 DCMN13C6SNA197 see page 225. DC 17W5 DCMV17C5SNA197 DCMZ17C5SNA197 DCMN17C5SNA197 DC 21WA4 DCMV21CA4SNA197 DCMZ21CA4SNA197 DCMN21CA4SNA197 DC 25W3 DCMV25C3SNA197 DCMZ25C3SNA197 DCMN25C3SNA197 DC 27W2 DCMV27C2SNA197 DCMZ27C2SNA197 DCMN27C2SNA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SNA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN5C1SNK126 For DD shell sizes, see page 55. (cid:2)Keyed. Engaging Face Ø 0,51 A 2,54 (.020) (1.00) 0,62 C (.024) B E D L 10° Hardware and signal contacts removed for clarity 0,82 BOARDLOCK (.032) Ø 0,76 3,45 (.136) (.030) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF #4-40 UNC F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) 0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 53

D Subminiature Combo D Coaxial Straight — Standard PC Tails (Size DD) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24C7PNK87 DDMZ24C7PNK87 DDMN24C7PNK87 DD 36W4 DDMV36C4PNK87 DDMZ36C4PNK87 DDMN36C4PNK87 DD 43W2 DDMV43C2PNK87 DDMZ43C2PNK87 DDMN43C2PNK87 DD 47W1 DDMV47C1PNK87 DDMZ47C1PNK87 DDMN47C1PNK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PNK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DDMN24C7PNK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 240. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A Ø 0,51 (.020) C 2,54 (.100) 0,62 B (.024) E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,76 5,69 3,45 (.032) (.030) 4,52 (.178) 2,84 (.224) (.136) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Hardware and coaxial contact #4-40 UNC removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 54 Dimensions subject to change

D Subminiature Combo D Coaxial Straight — Standard PC Tails (Size DD) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24C7SNA197 DDMZ24C7SNA197 DDMN24C7SNA197 DD 36W4 DDMV36C4SNA197 DDMZ36C4SNA197 DDMN36C4SNA197 DD 43W2 DDMV43C2SNA197 DDMZ43C2SNA197 DDMN43C2SNA197 DD 47W1 DDMV47C1SNA197 DDMZ47C1SNA197 DDMN47C1SNA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SNA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DDMN24C7SNK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 243. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A Ø 0,51 (.020) 2,54 C (.100) 0,62 (.024) B E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,76 5,69 3,45 (.032) (.030) (.224) (.136) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 55

D Subminiature Combo D Coaxial Straight — European PC Tails (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5C1PYK87 DEMZ5C1PYK87 DEMN5C1PYK87 DA 7W2 DAMV7C2PYK87 DAMZ7C2PYK87 DAMN7C2PYK87 DA 11W1 DAMV11C1PYK87 DAMZ11C1PYK87 DAMN11C1PYK87 DA 3W3 DAMV3C3PYK87 DAMZ3C3PYK87 DAMN3C3PYK87 DA 3WK3(cid:2) DAMV3CK3PYK87TM DAMZ3CK3PYK87TM DAMN3CK3PYK87TM DB 5W5 DBMV5C5PYK87 DBMZ5C5PYK87 DBMN5C5PYK87 DB 9W4 DBMV9C4PYK87 DBMZ9C4PYK87 DBMN9C4PYK87 Reader’s Resource DB 13W3 DBMV13C3PYK87 DBMZ13C3PYK87 DBMN13C3PYK87 (cid:1) For contact cavity arrangements, DB 17W2 DBMV17C2PYK87 DBMZ17C2PYK87 DBMN17C2PYK87 see page 222. DB 21W1 DBMV21C1PYK87 DBMZ21C1PYK87 DBMN21C1PYK87 (cid:1) For P.C. hole patterns, see pages 238-239. DC 8W8 DCMV8C8PYK87 DCMZ8C8PYK87 DCMN8C8PYK87 (cid:1) For panel cutouts, see page 221. DC 13W6 DCMV13C6PYK87 DCMZ13C6PYK87 DCMN13C6PYK87 (cid:1) For alternate 50 Ohm coaxial configuration, DC 17W5 DCMV17C5PYK87 DCMZ17C5PYK87 DCMN17C5PYK87 see page 225. DC 21WA4 DCMV21CA4PYK87 DCMZ21CA4PYK87 DCMN21CA4PYK87 DC 25W3 DCMV25C3PYK87 DCMZ25C3PYK87 DCMN25C3PYK87 DC 27W2 DCMV27C2PYK87 DCMZ27C2PYK87 DCMN27C2PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PYK87 For tin plated PC tails add A226 (signal contacts only). Example: DEMV5C1PYK87A226 For performance class 2 substitute K127 for K87. Example: DEMV5C1PYK127 For DD shell sizes, see page 58. (cid:2)Keyed. Engaging Face Ø 0,51 (.020) A 2,54 (.100) 0,62 C (.024) B E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,60 (.032) (.024) 3,45 2,84 (.136) 4,52 (.178) (.112) 7,62 ± 0,25 2,91 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Hardware and coaxial contact #4-40 UNC removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 56 Dimensions subject to change

D Subminiature Combo D Coaxial Straight — European PC Tails (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5C1SYA197 DEMZ5C1SYA197 DEMN5C1SYA197 DA 7W2 DAMV7C2SYA197 DAMZ7C2SYA197 DAMN7C2SYA197 DA 11W1 DAMV11C1SYA197 DAMZ11C1SYA197 DAMN11C1SYA197 DA 3W3 DAMV3C3SYA197 DAMZ3C3SYA197 DAMN3C3SYA197 DA 3WK3(cid:2) DAMV3CK3SYA197TM DAMZ3CK3SYA197TM DAMN3CK3SYA197TM DB 5W5 DBMV5C5SYA197 DBMZ5C5SYA197 DBMN5C5SYA197 DB 9W4 DBMV9C4SYA197 DBMZ9C4SYA197 DBMN9C4SYA197 DB 13W3 DBMV13C3SYA197 DBMZ13C3SYA197 DBMN13C3SYA197 Reader’s Resource (cid:1) For contact cavity arrangements, DB 17W2 DBMV17C2SYA197 DBMZ17C2SYA197 DBMN17C2SYA197 see page 223. DB 21W1 DBMV21C1SYA197 DBMZ21C1SYA197 DBMN21C1SYA197 (cid:1) For P.C. hole patterns, see pages 241-242. DC 8W8 DCMV8C8SYA197 DCMZ8C8SYA197 DCMN8C8SYA197 (cid:1) For panel cutouts, see page 221. DC 13W6 DCMV13C6SYA197 DCMZ13C6SYA197 DCMN13C6SYA197 (cid:1) For alternate 50 Ohm coaxial configuration, DC 17W5 DCMV17C5SYA197 DCMZ17C5SYA197 DCMN17C5SYA197 see page 225. DC 21WA4 DCMV21CA4SYA197 DCMZ21CA4SYA197 DCMN21CA4SYA197 DC 25W3 DCMV25C3SYA197 DCMZ25C3SYA197 DCMN25C3SYA197 DC 27W2 DCMV27C2SYA197 DCMZ27C2SYA197 DCMN27C2SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SYA197 For performance class 2 substitute K126 for A197. Example: DEMV5C1SYK126 For DD shell sizes, see page 59. (cid:2)Keyed. Engaging Face Ø 0,51 A 2,54 (.020) (.100) 0,62 C (.024) B E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 3,45 0,82 Ø 0,60 2,84 (.136) (.032) (.024) 4,52 (.178) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0.38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 57

D Subminiature Combo D Coaxial Straight — European PC Tails (Size DD) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24C7PYK87 DDMZ24C7PYK87 DDMN24C7PYK87 DD 36W4 DDMV36C4PYK87 DDMZ36C4PYK87 DDMN36C4PYK87 DD 43W2 DDMV43C2PYK87 DDMZ43C2PYK87 DDMN43C2PYK87 DD 47W1 DDMV47C1PYK87 DDMZ47C1PYK87 DDMN47C1PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PYK87 For tin plated PC tails add A226 (signal contacts only). Example: DDMV24C7PYK87A226 For performance class 2 substitute K127 for K87. Example: DDMV24C7PYK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 240. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face Ø 0,51 A (.020) C (2.1,5040) 0,62 (.024) B E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,60 (.032) (.024) 5,69 3,45 4,52 (.178) 2,84 (.224) (.136) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 58 Dimensions subject to change

D Subminiature Combo D Coaxial Straight — European PC Tails (Size DD) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24C7SYA197 DDMZ24C7SYA197 DDMN24C7SYA197 DD 36W4 DDMV36C4SYA197 DDMZ36C4SYA197 DDMN36C4SYA197 DD 43W2 DDMV43C2SYA197 DDMZ43C2SYA197 DDMN43C2SYA197 DD 47W1 DDMV47C1SYA197 DDMZ47C1SYA197 DDMN47C1SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SYA197 For performance class 2 substitute K126 for A197. Example: DDMV24C7SYK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 243. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A Ø 0,51 (.020) 2,54 C (.100) 0,62 B (.024) E D L 10° Hardware and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,60 (.032) 5,69 3,45 (.024) (.224) 4,52 (.178) 2,84 (.136) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Hardware and coaxial contact #4-40 UNC removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 59

D Subminiature Combo D 40 A High Power 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5H1PJK87 DEMC5H1PJK87 DEMD5H1PJK87 DEMG5H1PJK87 DA 7W2 DAMP7H2PJK87 DAMC7H2PJK87 DAMD7H2PJK87 DAMG7H2PJK87 DA 11W1 DAMP11H1PJK87 DAMC11H1PJK87 DAMD11H1PJK87 DAMG11H1PJK87 DA 3W3 DAMP3H3PJK87 DAMC3H3PJK87 DAMD3H3PJK87 DAMG3H3PJK87 DA 3WK3(cid:2) DAMP3HK3PJK87TM DAMC3HK3PJK87TM DAMD3HK3PJK87TM DAMG3HK3PJK87TM Reader’s Resource DB 5W5 DBMP5H5PJK87 DBMC5H5PJK87 DBMD5H5PJK87 DBMG5H5PJK87 (cid:1) For contact cavity arrangements, DB 9W4 DBMP9H4PJK87 DBMC9H4PJK87 DBMD9H4PJK87 DBMG9H4PJK87 see page 222. DB 13W3 DBMP13H3PJK87 DBMC13H3PJK87 DBMD13H3PJK87 DBMG13H3PJK87 (cid:1) For P.C. hole patterns, see pages 244-245. (cid:1) For panel cutouts, see page 221. DB 17W2 DBMP17H2PJK87 DBMC17H2PJK87 DBMD17H2PJK87 DBMG17H2PJK87 (cid:1) For alternate bracket configuration (when DB 21W1 DBMP21H1PJK87 DBMC21H1PJK87 DBMD21H1PJK87 DBMG21H1PJK87 connectors are supplied without boardlocks), DC 8W8 DCMP8H8PJK87 DCMC8H8PJK87 DCMD8H8PJK87 DCMG8H8PJK87 see page 226. DC 13W6 DCMP13H6PJK87 DCMC13H6PJK87 DCMD13H6PJK87 DCMG13H6PJK87 DC 17W5 DCMP17H5PJK87 DCMC17H5PJK87 DCMD17H5PJK87 DCMG17H5PJK87 DC 21WA4 DCMP21HA4PJK87 DCMC21HA4PJK87 DCMD21HA4PJK87 DCMG21HA4PJK87 DC 25W3 DCMP25H3PJK87 DCMC25H3PJK87 DCMD25H3PJK87 DCMG25H3PJK87 DC 27W2 DCMP27H2PJK87 DCMC27H2PJK87 DCMD27H2PJK87 DCMG27H2PJK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5H1PJK127 For DD shell sizes, see page 62. (cid:2)Keyed. Engaging Face 3,89 (.153) MIN. A C B 20,57 ± 0,38 (.810 ±.015) E D L 2,92 BOARDLOCK 10° (.115) Ø 0,76 Ø 3,18 Screw lock, boardlock, and signal contacts (.030) (.125) removed for clarity 4,33 ± 0,38 2,84 (.170 ± .015) (.112) BRACKET, METAL 12,34 RIVNUT 11,53 ± 0,25 (.486) 8,64 #4-40 UNC (.454 ± .010) (.340) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 60 Dimensions subject to change

D Subminiature Combo D 40 A High Power 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5H1SJA197 DEMC5H1SJA197 DEMD5H1SJA197 DEMG5H1SJA197 DA 7W2 DAMP7H2SJA197 DAMC7H2SJA197 DAMD7H2SJA197 DAMG7H2SJA197 DA 11W1 DAMP11H1SJA197 DAMC11H1SJA197 DAMD11H1SJA197 DAMG11H1SJA197 DA 3W3 DAMP3H3SJA197 DAMC3H3SJA197 DAMD3H3SJA197 DAMG3H3SJA197 DA 3WK3(cid:2) DAMP3HK3SJA197TM DAMC3HK3SJA197TM DAMD3HK3SJA197TM DAMG3HK3SJA197TM DB 5W5 DBMP5H5SJA197 DBMC5H5SJA197 DBMD5H5SJA197 DBMG5H5SJA197 Reader’s Resource DB 9W4 DBMP9H4SJA197 DBMC9H4SJA197 DBMD9H4SJA197 DBMG9H4SJA197 (cid:1) For contact cavity arrangements, DB 13W3 DBMP13H3SJA197 DBMC13H3SJA197 DBMD13H3SJA197 DBMG13H3SJA197 see page 223. DB 17W2 DBMP17H2SJA197 DBMC17H2SJA197 DBMD17H2SJA197 DBMG17H2SJA197 (cid:1) For P.C. hole patterns, see pages 247-248. (cid:1) For panel cutouts, see page 221. DB 21W1 DBMP21H1SJA197 DBMC21H1SJA197 DBMD21H1SJA197 DBMG21H1SJA197 (cid:1) For alternate bracket configuration (when DC 8W8 DCMP8H8SJA197 DCMC8H8SJA197 DCMD8H8SJA197 DCMG8H8SJA197 connectors are supplied without boardlocks), DC 13W6 DCMP13H6SJA197 DCMC13H6SJA197 DCMD13H6SJA197 DCMG13H6SJA197 see page 226. DC 17W5 DCMP17H5SJA197 DCMC17H5SJA197 DCMD17H5SJA197 DCMG17H5SJA197 DC 21WA4 DCMP21HA4SJA197 DCMC21HA4SJA197 DCMD21HA4SJA197 DCMG21HA4SJA197 DC 25W3 DCMP25H3SJA197 DCMC25H3SJA197 DCMD25H3SJA197 DCMG25H3SJA197 DC 27W2 DCMP27H2SJA197 DCMC27H2SJA197 DCMD27H2SJA197 DCMG27H2SJA197 Note: For contacts with 30 microinches of gold substitute K126 for A197. Example: DEMP5H1SJK126 For DD shell sizes, see page 63. (cid:2)Keyed. 3,89 (.153) MIN. Engaging Face 20,57 ± 0,38 (.810 ± .015) L 2,92 Screw lock, boardlock, and signal contacts (.115) removed for clarity Ø 0,76 (.030) 4,33 ± 0,38 (.170 ± .015) 2,84 (.112) BRACKET, METAL (1.24,8364) 8,64 #4R-I4V0N UUNTC 1(.14,5543 ±± .00,1205) (.340) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and high power contact #4-40 UNC removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 61

D Subminiature Combo D 40 A High Power 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Size DD) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMP24H7PJK87 DDMC24H7PJK87 DDMD24H7PJK87 DDMG24H7PJK87 DD 36W4 DDMP36H4PJK87 DDMC36H4PJK87 DDMD36H4PJK87 DDMG36H4PJK87 DD 43W2 DDMP43H2PJK87 DDMC43H2PJK87 DDMD43H2PJK87 DDMG43H2PJK87 DD 47W1 DDMP47H1PJK87 DDMC47H1PJK87 DDMD47H1PJK87 DDMG47H1PJK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24H7PJK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 246. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 ± 0,38 (.810 ± .015) E D L BOARDLOCK 2,92 (.115) 10° Ø(3.1.1285) Ø(0.0,7360) Screw lock, rbeomaordvleodc kfo, ra ncdla sriitgynal contacts 2,84 (.112) 5,68 4,33 ± 0,38 (.224) (.170 ± .015) BRACKET, METAL 13,74 (.541) 10,06 #4R-I4V0N UUNTC (1.14,5543 ± ± .00,1205) (.396) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 62 Dimensions subject to change

D Subminiature Combo D 40 A High Power 90°— Standard Footprint .489(cid:2)or .454 inch(cid:2)(cid:2)(Size DD) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMP24H7SJA197 DDMC24H7SJA197 DDMD24H7SJA197 DDMG24H7SJA197 DD 36W4 DDMP36H4SJA197 DDMC36H4SJA197 DDMD36H4SJA197 DDMG36H4SJA197 DD 43W2 DDMP43H2SJA197 DDMC43H2SJA197 DDMD43H2SJA197 DDMG43H2SJA197 DD 47W1 DDMP47H1SJA197 DDMC47H1SJA197 DDMD47H1SJA197 DDMG47H1SJA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24H7SJK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 249. (cid:1) For panel cutouts, see page 221. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 ± 0,38 (.810 ± .015) E D L 10° 2,92 BOARDLOCK Ø 0,76 Ø 3,18 (.115) (.030) (.125) Screw lock, boardlock, and signal contacts removed for clarity 2,84 (.112) 5,68 4,33 ± 0,38 BRACKET, (.224) (.170 ± .015) METAL RIVNUT (1.35,4714) (1.039,066) #4-40 UNC (1.14,5543 ± ± .00,1205) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and high power contact #4-40 UNC removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 63

D Subminiature Combo D 40 A High Power 90°— European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5P1PVK87 DEMC5P1PVK87 DEMD5P1PVK87 DEMG5P1PVK87 DA 7W2 DAMP7P2PVK87 DAMC7P2PVK87 DAMD7P2PVK87 DAMG7P2PVK87 DA 11W1 DAMP11P1PVK87 DAMC11P1PVK87 DAMD11P1PVK87 DAMG11P1PVK87 DA 3W3 DAMP3P3PVK87 DAMC3P3PVK87 DAMD3P3PVK87 DAMG3P3PVK87 DA 3WK3(cid:2) DAMP3PK3PVK87TM DAMC3PK3PVK87TM DAMD3PK3PVK87TM DAMG3PK3PVK87TM DB 5W5 DBMP5P5PVK87 DBMC5P5PVK87 DBMD5P5PVK87 DBMG5P5PVK87 DB 9W4 DBMP9P4PVK87 DBMC9P4PVK87 DBMD9P4PVK87 DBMG9P4PVK87 Reader’s Resource (cid:1) For contact cavity arrangements, DB 13W3 DBMP13P3PVK87 DBMC13P3PVK87 DBMD13P3PVK87 DBMG13P3PVK87 see page 222. DB 17W2 DBMP17P2PVK87 DBMC17P2PVK87 DBMD17P2PVK87 DBMG17P2PVK87 (cid:1) For P.C. hole patterns, see pages 250-251. DB 21W1 DBMP21P1PVK87 DBMC21P1PVK87 DBMD21P1PVK87 DBMG21P1PVK87 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMP8P8PVK87 DCMC8P8PVK87 DCMD8P8PVK87 DCMG8P8PVK87 (cid:1) For alternate bracket configuration (when DC 13W6 DCMP13P6PVK87 DCMC13P6PVK87 DCMD13P6PVK87 DCMG13P6PVK87 connectors are supplied without boardlocks), DC 17W5 DCMP17P5PVK87 DCMC17P5PVK87 DCMD17P5PVK87 DCMG17P5PVK87 see page 226. DC 21WA4 DCMP21PA4PVK87 DCMC21PA4PVK87 DCMD21PA4PVK87 DCMG21PA4PVK87 DC 25W3 DCMP25P3PVK87 DCMC25P3PVK87 DCMD25P3PVK87 DCMG25P3PVK87 DC 27W2 DCMP27P2PVK87 DCMC27P2PVK87 DCMD27P2PVK87 DCMG27P2PVK87 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: For tin plated PC tails add A226 (signal contacts only). Example DEMP5P1PVK87A226 For performance class 2 substitute K127 for K87. Example: DEMP5P1PVK127 (cid:2)Keyed. Engaging Face 3,30 (.130) MIN. A C B 11,94 ± 0,25 (.470 ± .010) E D L Screw lock, boardlock, and signal contacts 1,00 (.039) removed for clarity 2,92 BOARDLOCK (.115) Ø 0,60 Ø 2,90 (.024) (.114) 2,54 4,00 (.157) BRACKET, (.100) METAL 14,55 (.573) 10,85 RIVNUT 9,40 ± 0,20 (.427) #4-40 UNC (.370 ± .008) F W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 64 Dimensions subject to change

D Subminiature Combo D 40 A High Power 90°— European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMP5P1SVA197 DEMC5P1SVA197 DEMD5P1SVA197 DEMG5P1SVA197 DA 7W2 DAMP7P2SVA197 DAMC7P2SVA197 DAMD7P2SVA197 DAMG7P2SVA197 DA 11W1 DAMP11P1SVA197 DAMC11P1SVA197 DAMD11P1SVA197 DAMG11P1SVA197 DA 3W3 DAMP3P3SVA197 DAMC3P3SVA197 DAMD3P3SVA197 DAMG3P3SVA197 DA 3WK3(cid:2) DAMP3PK3SVA197TM DAMC3PK3SVA197TM DAMD3PK3SVA197TM DAMG3PK3SVA197TM DB 5W5 DBMP5P5SVA197 DBMC5P5SVA197 DBMD5P5SVA197 DBMG5P5SVA197 DB 9W4 DBMP9P4SVA197 DBMC9P4SVA197 DBMD9P4SVA197 DBMG9P4SVA197 Reader’s Resource DB 13W3 DBMP13P3SVA197 DBMC13P3SVA197 DBMD13P3SVA197 DBMG13P3SVA197 (cid:1) For contact cavity arrangements, DB 17W2 DBMP17P2SVA197 DBMC17P2SVA197 DBMD17P2SVA197 DBMG17P2SVA197 see page 223. (cid:1) For P.C. hole patterns, see pages 252-253. DB 21W1 DBMP21P1SVA197 DBMC21P1SVA197 DBMD21P1SVA197 DBMG21P1SVA197 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMP8P8SVA197 DCMC8P8SVA197 DCMD8P8SVA197 DCMG8P8SVA197 (cid:1) For alternate bracket configuration (when DC 13W6 DCMP13P6SVA197 DCMC13P6SVA197 DCMD13P6SVA197 DCMG13P6SVA197 connectors are supplied without boardlocks), DC 17W5 DCMP17P5SVA197 DCMC17P5SVA197 DCMD17P5SVA197 DCMG17P5SVA197 see page 226. DC 21WA4 DCMP21PA4SVA197 DCMC21PA4SVA197 DCMD21PA4SVA197 DCMG21PA4SVA197 DC 25W3 DCMP25P3SVA197 DCMC25P3SVA197 DCMD25P3SVA197 DCMG25P3SVA197 DC 27W2 DCMP27P2SVA197 DCMC27P2SVA197 DCMD27P2SVA197 DCMG27P2SVA197 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: For performance class 2 substitute K126 for A197. Example: DEMP5P1SVK126 (cid:2)Keyed. Engaging Face 3,30 (.130) A MIN. C B 11,94 ± 0,25 (.470 ± .010) E D L 1,00 (.039) 2,92 Screw lock, boardlock, and signal contacts (.115) removed for clarity BOARDLOCK Ø 0,60 Ø 2,90 (.024) (.114) 4,00 (.157) 2,54 BRACKET, (.100) METAL 14,55 (.573) 10,85 RIVNUT 9,40 ± 0,20 (.427) #4-40 UNC (.370 ± .008) F W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0.76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 65

D Subminiature Combo D 40 A High Power Straight — Standard PC Tails (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5H1PNK87 DEMZ5H1PNK87 DEMN5H1PNK87 DA 7W2 DAMV7H2PNK87 DAMZ7H2PNK87 DAMN7H2PNK87 DA 11W1 DAMV11H1PNK87 DAMZ11H1PNK87 DAMN11H1PNK87 DA 3W3 DAMV3H3PNK87 DAMZ3H3PNK87 DAMN3H3PNK87 DA 3WK3(cid:2) DAMV3HK3PNK87TM DAMZ3HK3PNK87TM DAMN3HK3PNK87TM DB 5W5 DBMV5H5PNK87 DBMZ5H5PNK87 DBMN5H5PNK87 DB 9W4 DBMV9H4PNK87 DBMZ9H4PNK87 DBMN9H4PNK87 Reader’s Resource (cid:1) For contact cavity arrangements, DB 13W3 DBMV13H3PNK87 DBMZ13H3PNK87 DBMN13H3PNK87 DB 17W2 DBMV17H2PNK87 DBMZ17H2PNK87 DBMN17H2PNK87 see page 222. (cid:1) For P.C. hole patterns, see pages 254-255. DB 21W1 DBMV21H1PNK87 DBMZ21H1PNK87 DBMN21H1PNK87 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMV8H8PNK87 DCMZ8H8PNK87 DCMN8H8PNK87 DC 13W6 DCMV13H6PNK87 DCMZ13H6PNK87 DCMN13H6PNK87 DC 17W5 DCMV17H5PNK87 DCMZ17H5PNK87 DCMN17H5PNK87 DC 21WA4 DCMV21HA4PNK87 DCMZ21HA4PNK87 DCMN21HA4PNK87 DC 25W3 DCMV25H3PNK87 DCMZ25H3PNK87 DCMN25H3PNK87 DC 27W2 DCMV27H2PNK87 DCMZ27H2PNK87 DCMN27H2PNK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMV5H1PNK127 For DD shell sizes, see page 68. (cid:2)Keyed. Engaging Face A C B E D 10° Ø 0,76 BOARDLOCK Ø 3,18 (.030) (.125) 4,65 4,52 (.178) 2,84 (.183) (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF W L #4-40 UNC 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock and high power contact removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 66 Dimensions subject to change

D Subminiature Combo D 40 A High Power Straight — Standard PC Tails (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5H1SNA197 DEMZ5H1SNA197 DEMN5H1SNA197 DA 7W2 DAMV7H2SNA197 DAMZ7H2SNA197 DAMN7H2SNA197 DA 11W1 DAMV11H1SNA197 DAMZ11H1SNA197 DAMN11H1SNA197 DA 3W3 DAMV3H3SNA197 DAMZ3H3SNA197 DAMN3H3SNA197 DA 3WK3(cid:2) DAMV3HK3SNA197TM DAMZ3HK3SNA197TM DAMN3HK3SNA197TM DB 5W5 DBMV5H5SNA197 DBMZ5H5SNA197 DBMN5H5SNA197 DB 9W4 DBMV9H4SNA197 DBMZ9H4SNA197 DBMN9H4SNA197 Reader’s Resource (cid:1) For contact cavity arrangements, DB 13W3 DBMV13H3SNA197 DBMZ13H3SNA197 DBMN13H3SNA197 DB 17W2 DBMV17H2SNA197 DBMZ17H2SNA197 DBMN17H2SNA197 see page 223. (cid:1) For P.C. hole patterns, see pages 257-258. DB 21W1 DBMV21H1SNA197 DBMZ21H1SNA197 DBMN21H1SNA197 (cid:1) For panel cutouts, see page 221. DC 8W8 DCMV8H8SNA197 DCMZ8H8SNA197 DCMN8H8SNA197 DC 13W6 DCMV13H6SNA197 DCMZ13H6SNA197 DCMN13H6SNA197 DC 17W5 DCMV17H5SNA197 DCMZ17H5SNA197 DCMN17H5SNA197 DC 21WA4 DCMV21HA4SNA197 DCMZ21HA4SNA197 DCMN21HA4SNA197 DC 25W3 DCMV25H3SNA197 DCMZ25H3SNA197 DCMN25H3SNA197 DC 27W2 DCMV27H2SNA197 DCMZ27H2SNA197 DCMN27H2SNA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMV5H1SNK126 For DD shell sizes, see page 69. (cid:2)Keyed. Engaging Face A C B E D 10° BOARDLOCK Ø 0,76 4,65 Ø 3,18 (.030) 4,52 (.178) (.125) (.183) 2,84 (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF W #4-40 UNC L 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 67

D Subminiature Combo D 40 A High Power Straight — Standard PC Tails (Size DD) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24H7PNK87 DDMZ24H7PNK87 DDMN24H7PNK87 DD 36W4 DDMV36H4PNK87 DDMZ36H4PNK87 DDMN36H4PNK87 DD 43W2 DDMV43H2PNK87 DDMZ43H2PNK87 DDMN43H2PNK87 DD 47W1 DDMV47H1PNK87 DDMZ47H1PNK87 DDMN47H1PNK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMV24H7PNK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 256. (cid:1) For panel cutouts, see page 221. Engaging Face A C B E D 10° Ø 3,18 5,69 BOARDLOCK (.125) Ø 0,76 (.224) 4,65 (.030) 4,52 (.178) 2,84 (.183) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC L 6,50 ± 0,25 (.256 ± .010) SC#R4-E4W0 U LNOCCK Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 68 Dimensions subject to change

D Subminiature Combo D 40 A High Power Straight — Standard PC Tails (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24H7SNA197 DDMZ24H7SNA197 DDMN24H7SNA197 DD 36W4 DDMV36H4SNA197 DDMZ36H4SNA197 DDMN36H4SNA197 DD 43W2 DDMV43H2SNA197 DDMZ43H2SNA197 DDMN43H2SNA197 DD 47W1 DDMV47H1SNA197 DDMZ47H1SNA197 DDMN47H1SNA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMV24H7SNK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 259. (cid:1) For panel cutouts, see page 221. Engaging Face A C B E D 10° BOARDLOCK Ø(. 003,706) Ø(. 132,158) (5.2,6294) 2,84 4,65 4,52 (.178) (.112) (.183) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) F STANDOFF W #4-40 UNC L 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock and high power contact #4-40 UNC removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 69

D Subminiature Combo D 40 A High Power Straight — European PC Tails (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5H1PYK87 DEMZ5H1PYK87 DEMN5H1PYK87 DA 7W2 DAMV7H2PYK87 DAMZ7H2PYK87 DAMN7H2PYK87 DA 11W1 DAMV11H1PYK87 DAMZ11H1PYK87 DAMN11H1PYK87 DA 3W3 DAMV3H3PYK87 DAMZ3H3PYK87 DAMN3H3PYK87 DA 3WK3(cid:2) DAMV3HK3PYK87TM DAMZ3HK3PYK87TM DAMN3HK3PYK87TM DB 5W5 DBMV5H5PYK87 DBMZ5H5PYK87 DBMN5H5PYK87 DB 9W4 DBMV9H4PYK87 DBMZ9H4PYK87 DBMN9H4PYK87 DB 13W3 DBMV13H3PYK87 DBMZ13H3PYK87 DBMN13H3PYK87 DB 17W2 DBMV17H2PYK87 DBMZ17H2PYK87 DBMN17H2PYK87 DB 21W1 DBMV21H1PYK87 DBMZ21H1PYK87 DBMN21H1PYK87 Reader’s Resource (cid:1) For contact cavity arrangements, DC 8W8 DCMV8H8PYK87 DCMZ8H8PYK87 DCMN8H8PYK87 DC 13W6 DCMV13H6PYK87 DCMZ13H6PYK87 DCMN13H6PYK87 see page 222. (cid:1) For P.C. hole patterns, see pages 254-255. DC 17W5 DCMV17H5PYK87 DCMZ17H5PYK87 DCMN17H5PYK87 (cid:1) For panel cutouts, see page 221. DC 21WA4 DCMV21HA4PYK87 DCMZ21HA4PYK87 DCMN21HA4PYK87 DC 25W3 DCMV25H3PYK87 DCMZ25H3PYK87 DCMN25H3PYK87 DC 27W2 DCMV27H2PYK87 DCMZ27H2PYK87 DCMN27H2PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For tin plated PC tails add A226 (signal contacts only). Example: DEMV5H1PYK87A226 For performance class 2 substitute K127 for K87. Example: DEMV5H1PYK127 For DD shell sizes, see page 72. (cid:2)Keyed. Engaging Face A C B E D 10° BOARDLOCK Ø 3,18 Ø 0,60 (.125) (.024) 4,65 4,52 (.178) 2,84 (.183) (.112) 7.62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W L 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 70 Dimensions subject to change

D Subminiature Combo D 40 A High Power Straight — European PC Tails (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMV5H1SYA197 DEMZ5H1SYA197 DEMN5H1SYA197 DA 7W2 DAMV7H2SYA197 DAMZ7H2SYA197 DAMN7H2SYA197 DA 11W1 DAMV11H1SYA197 DAMZ11H1SYA197 DAMN11H1SYA197 DA 3W3 DAMV3H3SYA197 DAMZ3H3SYA197 DAMN3H3SYA197 DA 3WK3(cid:2) DAMV3HK3SYA197TM DAMZ3HK3SYA197TM DAMN3HK3SYA197TM DB 5W5 DBMV5H5SYA197 DBMZ5H5SYA197 DBMN5H5SYA197 DB 9W4 DBMV9H4SYA197 DBMZ9H4SYA197 DBMN9H4SYA197 DB 13W3 DBMV13H3SYA197 DBMZ13H3SYA197 DBMN13H3SYA197 DB 17W2 DBMV17H2SYA197 DBMZ17H2SYA197 DBMN17H2SYA197 Reader’s Resource DB 21W1 DBMV21H1SYA197 DBMZ21H1SYA197 DBMN21H1SYA197 (cid:1) For contact cavity arrangements, DC 8W8 DCMV8H8SYA197 DCMZ8H8SYA197 DCMN8H8SYA197 see page 223. (cid:1) For P.C. hole patterns, see pages 257-258. DC 13W6 DCMV13H6SYA197 DCMZ13H6SYA197 DCMN13H6SYA197 (cid:1) For panel cutouts, see page 221. DC 17W5 DCMV17H5SYA197 DCMZ17H5SYA197 DCMN17H5SYA197 DC 21WA4 DCMV21HA4SYA197 DCMZ21HA4SYA197 DCMN21HA4SYA197 DC 25W3 DCMV25H3SYA197 DCMZ25H3SYA197 DCMN25H3SYA197 DC 27W2 DCMV27H2SYA197 DCMZ27H2SYA197 DCMN27H2SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For performance class 2 substitute K126 for A197. Example: DEMV5H1SYK126 For DD shell sizes, see page 73. (cid:2)Keyed. Engaging Face A C B E D 10° BOARDLOCK Ø 3,18 Ø 0,60 4,65 (.125) (.024) 4,52 (.178) 2,84 (.183) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W L 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 71

D Subminiature Combo D 40 A High Power Straight — European PC Tails (Size DD) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24H7PYK87 DDMZ24H7PYK87 DDMN24H7PYK87 DD 36W4 DDMV36H4PYK87 DDMZ36H4PYK87 DDMN36H4PYK87 DD 43W2 DDMV43H2PYK87 DDMZ43H2PYK87 DDMN43H2PYK87 DD 47W1 DDMV47H1PYK87 DDMZ47H1PYK87 DDMN47H1PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For tin plated PC tails add A226 (signal contacts only). Example DDMV24H7PYK87A226 For performance class 2 substitute K127 for K87. Example: DDMV24H7PYK127 Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 256. (cid:1) For panel cutouts, see page 221. Engaging Face A C B E D BOARDLOCK Ø 3,18 Ø 0,60 5,69 (.224) (.125) (.024) 4,52 (.178) 2,84 4,65 (.112) (.183) (7.3,6020 ±± 0.0,2150) (2.1,1952) F STANDOFF W #4-40 UNC L (6.2,5506 ±± 0.0,2150) SC#R4-E4W0 U LNOCCK Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 72 Dimensions subject to change

D Subminiature Combo D 40 A High Power Straight — European PC Tails (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMV24H7SYA197 DDMZ24H7SYA197 DDMN24H7SYA197 DD 36W4 DDMV36H4SYA197 DDMZ36H4SYA197 DDMN36H4SYA197 DD 43W2 DDMV43H2SYA197 DDMZ43H2SYA197 DDMN43H2SYA197 DD 47W1 DDMV47H1SYA197 DDMZ47H1SYA197 DDMN47H1SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Note: For performance class 2 substitute K126 for A197. Example: DDMV24H7SYK126 Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 259. (cid:1) For panel cutouts, see page 221. Engaging Face A C B E D BOARDLOCK Ø 0,60 Ø 3,18 5,69 4,65 (.024) (.125) (.224) 4,52 (.178) 2,84 (.183) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W L 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 73

D Subminiature Combo D 90°PC Tail — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DD) Plug Part Numbers Part Number Part Number Shell Size Layout Without Hardware Metal Bracket With #4-40 Nut DE 5W1 DEM-5W1P-1A0N-K87 DEM-5W1P-1A7N-K87 DA 7W2 DAM-7W2P-1A0N-K87 DAM-7W2P-1A7N-K87 DA 11W1 DAM-11W1P-1A0N-K87 DAM-11W1P-1A7N-K87 DA 3W3 DAM-3W3P-1A0N-K87 DAM-3W3P-1A7N-K87 DA 3WK3(cid:2) DAM-3WK3P-1A0N-K87 DAM-3WK3P-1A7N-K87 DB 5W5 DBM-5W5P-1A0N-K87 DBM-5W5P-1A7N-K87 DB 9W4 DBM-9W4P-1A0N-K87 DBM-9W4P-1A7N-K87 DB 13W3 DBM-13W3P-1A0N-K87 DBM-13W3P-1A7N-K87 DB 17W2 DBM-17W2P-1A0N-K87 DBM-17W2P-1A7N-K87 DB 21W1 DBM-21W1P-1A0N-K87 DBM-21W1P-1A7N-K87 Reader’s Resource (cid:1) For contact cavity arrangements, DC 8W8 DCM-8W8P-1A0N-K87 DCM-8W8P-1A7N-K87 DC 13W6 DCM-13W6P-1A0N-K87 DCM-13W6P-1A7N-K87 see page 222. (cid:1) For P.C. hole patterns, see pages 260-262. DC 17W5 DCM-17W5P-1A0N-K87 DCM-17W5P-1A7N-K87 (cid:1) For panel cutouts, see page 221. DC 21WA4 DCM-21WA4P-1A0N-K87 DCM-21WA4P-1A7N-K87 (cid:1) For hardware views (European), DC 25W3 DCM-25W3P-1A0N-K87 DCM-25W3P-1A7N-K87 see page 227. DC 27W2 DCM-27W2P-1A0N-K87 DCM-27W2P-1A7N-K87 DD 24W7 DDM-24W7P-1A0N-K87 DDM-24W7P-1A7N-K87 DD 36W4 DDM-36W4P-1A0N-K87 DDM-36W4P-1A7N-K87 DD 43W2 DDM-43W2P-1A0N-K87 DDM-43W2P-1A7N-K87 DD 47W1 DDM-47W1P-1A0N-K87 DDM-47W1P-1A7N-K87 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-1A0N-A191-K87 (cid:2)Keyed. DD Configuration 2,54 Engaging Face (.100) 5,00 5,08 (.197) A (.200) C B Ø 3,05 (.120) 9,40 ± 0,20 (.370 ± .008) K E D L 10° Ø 0,60 (.024) 2,54 5,00 (.100) (.197) 9,40 ± 0,20 (.370 ± .008) F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 74 Dimensions subject to change

D Subminiature Combo D 90°PC Tail — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2)(Sizes DE-DD) Receptacle Part Numbers Part Number Part Number Shell Size Layout Without Hardware Metal Bracket With #4-40 Nut DE 5W1 DEM-5W1S-1A0N-A197 DEM-5W1S-1A7N-A197 DA 7W2 DAM-7W2S-1A0N-A197 DAM-7W2S-1A7N-A197 DA 11W1 DAM-11W1S-1A0N-A197 DAM-11W1S-1A7N-A197 DA 3W3 DAM-3W3S-1A0N-A197 DAM-3W3S-1A7N-A197 DA 3WK3(cid:2) DAM-3WK3S-1A0N-A197 DAM-3WK3S-1A7N-A197 DB 5W5 DBM-5W5S-1A0N-A197 DBM-5W5S-1A7N-A197 DB 9W4 DBM-9W4S-1A0N-A197 DBM-9W4S-1A7N-A197 DB 13W3 DBM-13W3S-1A0N-A197 DBM-13W3S-1A7N-A197 DB 17W2 DBM-17W2S-1A0N-A197 DBM-17W2S-1A7N-A197 DB 21W1 DBM-21W1S-1A0N-A197 DBM-21W1S-1A7N-A197 DC 8W8 DCM-8W8S-1A0N-A197 DCM-8W8S-1A7N-A197 Reader’s Resource (cid:1) For contact cavity arrangements, DC 13W6 DCM-13W6S-1A0N-A197 DCM-13W6S-1A7N-A197 see page 223. DC 17W5 DCM-17W5S-1A0N-A197 DCM-17W5S-1A7N-A197 (cid:1) For P.C. hole patterns, see pages 263-265. DC 21WA4 DCM-21WA4S-1A0N-A197 DCM-21WA4S-1A7N-A197 (cid:1) For panel cutouts, see page 221. DC 25W3 DCM-25W3S-1A0N-A197 DCM-25W3S-1A7N-A197 (cid:1) For hardware views (European), DC 27W2 DCM-27W2S-1A0N-A197 DCM-27W2S-1A7N-A197 see page 227. DD 24W7 DDM-24W7S-1A0N-A197 DDM-24W7S-1A7N-A197 DD 36W4 DDM-36W4S-1A0N-A197 DDM-36W4S-1A7N-A197 DD 43W2 DDM-43W2S-1A0N-A197 DDM-43W2S-1A7N-A197 DD 47W1 DDM-47W1S-1A0N-A197 DDM-47W1S-1A7N-A197 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-1A0N-A191-A197 (cid:2)Keyed. Engaging Face DD Configuration 2,54 (.100) 5,00 A 5,08 (.197) C (.200) Ø 3,05 B (.120) 9,40 ± 0,20 K E D (.370 ± .008) L 10° Ø 0,60 (.024) 5,00 2,54 (.197) (.100) 9,40 ± 0,20 (.370 ± .008) F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 75

D Subminiature Combo D Straight PC Tails — European (Sizes DE-DD) Plug Part Numbers Part Number Part Number X X Shell Size Layout 4,60 (.181) 6,05 (.238) DE 5W1 DEM-5W1P-OL2-K87 DEM-5W1P-OL4-K87 DA 7W2 DAM-7W2P-OL2-K87 DAM-7W2P-OL4-K87 DA 11W1 DAM-11W1P-OL2-K87 DAM-11W1P-OL4-K87 DA 3W3 DAM-3W3P-OL2-K87 DAM-3W3P-OL4-K87 DA 3WK3(cid:2) DAM-3WK3P-OL2-K87 DAM-3WK3P-OL4-K87 DB 5W5 DBM-5W5P-OL2-K87 DBM-5W5P-OL4-K87 DB 9W4 DBM-9W4P-OL2-K87 DBM-9W4P-OL4-K87 DB 13W3 DBM-13W3P-OL2-K87 DBM-13W3P-OL4-K87 DB 17W2 DBM-17W2P-OL2-K87 DBM-17W2P-OL4-K87 Reader’s Resource DB 21W1 DBM-21W1P-OL2-K87 DBM-21W1P-OL4-K87 (cid:1) For contact cavity arrangements, DC 8W8 DCM-8W8P-OL2-K87 DCM-8W8P-OL4-K87 see page 222. DC 13W6 DCM-13W6P-OL2-K87 DCM-13W6P-OL4-K87 (cid:1) For P.C. hole patterns, see pages 266-268. DC 17W5 DCM-17W5P-OL2-K87 DCM-17W5P-OL4-K87 (cid:1) For panel cutouts, see page 221. DC 21WA4 DCM-21WA4P-OL2-K87 DCM-21WA4P-OL4-K87 (cid:1) For hardware views (European), DC 25W3 DCM-25W3P-OL2-K87 DCM-25W3P-OL4-K87 see page 227. DC 27W2 DCM-27W2P-OL2-K87 DCM-27W2P-OL4-K87 DD 24W7 DDM-24W7P-OL2-K87 DDM-24W7P-OL4-K87 DD 36W4 DDM-36W4P-OL2-K87 DDM-36W4P-OL4-K87 DD 43W2 DDM-43W2P-OL2-K87 DDM-43W2P-OL4-K87 DD 47W1 DDM-47W1P-OL2-K87 DDM-47W1P-OL4-K87 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-OL2-A191-K87 (cid:2)Keyed. DD Configuration 5,69 Engaging Face (.224) 2,84 (.112) A C Ø 3,05 B (.120) K E D L 10° Ø 0,60 2,84 (.024) (.112) X F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 76 Dimensions subject to change

D Subminiature Combo D Straight PC Tails — European (Sizes DE-DD) Receptacle Part Numbers Part Number Part Number X X Shell Size Layout 4.60 (.181) 6.05 (.238) DE 5W1 DEM-5W1S-OL2-A197 DEM-5W1S-OL4-A197 DA 7W2 DAM-7W2S-OL2-A197 DAM-7W2S-OL4-A197 DA 11W1 DAM-11W1S-OL2-A197 DAM-11W1S-OL4-A197 DA 3W3 DAM-3W3S-OL2-A197 DAM-3W3S-OL4-A197 DA 3WK3(cid:2) DAM-3WK3S-OL2-A197 DAM-3WK3S-OL4-A197 DB 5W5 DBM-5W5S-OL2-A197 DBM-5W5S-OL4-A197 DB 9W4 DBM-9W4S-OL2-A197 DBM-9W4S-OL4-A197 DB 13W3 DBM-13W3S-OL2-A197 DBM-13W3S-OL4-A197 DB 17W2 DBM-17W2S-OL2-A197 DBM-17W2S-OL4-A197 Reader’s Resource DB 21W1 DBM-21W1S-OL2-A197 DBM-21W1S-OL4-A197 (cid:1) For contact cavity arrangements, DC 8W8 DCM-8W8S-OL2-A197 DCM-8W8S-OL4-A197 see page 223. (cid:1) For P.C. hole patterns, see pages 269-271. DC 13W6 DCM-13W6S-OL2-A197 DCM-13W6S-OL4-A197 (cid:1) For panel cutouts, see page 221. DC 17W5 DCM-17W5S-OL2-A197 DCM-17W5S-OL4-A197 (cid:1) For hardware views (European), DC 21WA4 DCM-21WA4S-OL2-A197 DCM-21WA4S-OL4-A197 see page 227. DC 25W3 DCM-25W3S-OL2-A197 DCM-25W3S-OL4-A197 DC 27W2 DCM-27W2S-OL2-A197 DCM-27W2S-OL4-A197 DD 24W7 DDM-24W7S-OL2-A197 DDM-24W7S-OL4-A197 DD 36W4 DDM-36W4S-OL2-A197 DDM-36W4S-OL4-A197 DD 43W2 DDM-43W2S-OL2-A197 DDM-43W2S-OL4-A197 DD 47W1 DDM-47W1S-OL2-A197 DDM-47W1S-OL4-A197 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-OL2-A191-A197 (cid:2)Keyed. DD Configuration 5,69 Engaging Face (.224) 2,84 (.112) A C Ø 3,05 B (.120) K E D L 10° 2,84 Ø 0,60 (.112) (.024) X F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 77

D Subminiature Combo D Solder Cup (Sizes DE-DD) Plug Part Numbers Dual Clinch Nut Shell Size Layout Through Hole Float Mount #4-40 UNC DE 5W1 DEM5W1PK87 DEMY5W1PK87 DEME5W1PK87 DA 7W2 DAM7W2PK87 DAMY7W2PK87 DAME7W2PK87 DA 11W1 DAM11W1PK87 DAMY11W1PK87 DAME11W1PK87 DA 3W3 DAM3W3PK87 DAMY3W3PK87 DAME3W3PK87 DA 3WK3(cid:2) DAM3WK3PK87 DAMY3WK3PK87 DAME3WK3PK87 DB 5W5 DBMP5W5PK87 DBMY5W5PK87 DBME5W5PK87 DB 9W4 DBM9W4PK87 DBMY9W4PK87 DBME9W4PK87 DB 13W3 DBM13W3PK87 DBMY13W3PK87 DBME13W3PK87 Reader’s Resource (cid:1) For contact cavity arrangements, DB 17W2 DBM17W2PK87 DBMY17W2PK87 DBME17W2PK87 DB 21W1 DBM21W1PK87 DBMY21W1PK87 DBME21W1PK87 see page 222. (cid:1) For panel cutouts, see page 221. DC 8W8 DCM8W8PK87 DCMY8W8PK87 DCME8W8PK87 (cid:1) For hardware views (Standard), see page 226. DC 13W6 DCM13W6PK87 DCMY13W6PK87 DCME13W6PK87 DC 17W5 DCM17W5PK87 DCMY17W5PK87 DCME17W5PK87 DC 21WA4 DCM21WA4PK87 DCMY21WA4PK87 DCME21WA4PK87 DC 25W3 DCM25W3PK87 DCMY25W3PK87 DCME25W3PK87 DC 27W2 DCM27W2PK87 DCMY27W2PK87 DCME27W2PK87 DD 24W7 DDM24W7PK87 DDMY24W7PK87 DDME24W7PK87 DD 36W4 DDM36W4PK87 DDMY36W4PK87 DDME36W4PK87 DD 43W2 DDM43W2PK87 DDMY43W2PK87 DDME43W2PK87 DD 47W1 DDM47W1PK87 DDMY47W1PK87 DDME47W1PK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEM5W1PK127 For M3 clinch nuts substitute X for E. Example: DEMX5W1PK87 (cid:2)Keyed. Engaging Face DD Configuration 5,69 A (.224) 2,84 C Ø 3,05 (.112) (.120) B K E D L 10° 10,72 (.422) 2,84 MAX (.112) F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 78 Dimensions subject to change

D Subminiature Combo D Solder Cup (Sizes DE-DD) Receptacle Part Numbers Dual Clinch Nut Shell Size Layout Through Hole Float Mount #4-40 UNC DE 5W1 DEM5W1SA197 DEMY5W1SA197 DEME5W1SA197 DA 7W2 DAM7W2SA197 DAMY7W2SA197 DAME7W2SA197 DA 11W1 DAM11W1SA197 DAMY11W1SA197 DAME11W1SA197 DA 3W3 DAM3W3SA197 DAMY3W3SA197 DAME3W3SA197 DA 3WK3(cid:2) DAM3WK3SA197 DAMY3WK3SA197 DAME3WK3SA197 DB 5W5 DBM5W5SA197 DBMY5W5SA197 DBME5W5SA197 DB 9W4 DBM9W4SA197 DBMY9W4SA197 DBME9W4SA197 DB 13W3 DBM13W3SA197 DBMY13W3SA197 DBME13W3SA197 DB 17W2 DBM17W2SA197 DBMY17W2SA197 DBME17W2SA197 Reader’s Resource DB 21W1 DBM21W1SA197 DBMY21W1SA197 DBME21W1SA197 (cid:1) For contact cavity arrangements, DC 8W8 DCM8W8SA197 DCMY8W8SA197 DCME8W8SA197 see page 223. DC 13W6 DCM13W6SA197 DCMY13W6SA197 DCME13W6SA197 (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. DC 17W5 DCM17W5SA197 DCMY17W5SA197 DCME17W5SA197 DC 21WA4 DCM21WA4SA197 DCMY21WA4SA197 DCME21WA4SA197 DC 25W3 DCM25W3SA197 DCMY25W3SA197 DCME25W3SA197 DC 27W2 DCM27W2SA197 DCMY27W2SA197 DCME27W2SA197 DD 24W7 DDM24W7SA197 DDMY24W7SA197 DDME24W7SA197 DD 36W4 DDM36W4SA197 DDMY36W4SA197 DDME36W4SA197 DD 43W2 DDM43W2SA197 DDMY43W2SA197 DDME43W2SA197 DD 47W1 DDM47W1SA197 DDMY47W1SA197 DDME47W1SA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEM5W1SK126 For M3 clinch nuts substitute X for E. Example: DEMX5W1SA197 (cid:2)Keyed. DD Configuration Engaging Face 5,69 A (.224) C 2,84 (.112) Ø 3,05 B (.120) K E D L 10° 9,91 (.390) 2,84 (.112) MAX F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 79

D Subminiature Combo D Crimp Cable Connectors without Contacts (Sizes DA-DD) Plug Part Numbers Shell Size Layout Part Number DA 7W2 DAA7W2PK87F0 DA 11W1 DAA11W1PK87F0 DA 3W3 DAA3W3PK87F0 DB 5W5 DBA5W5PK87F0 DB 9W4 DBA9W4PK87F0 DB 13W3 DBA13W3PK87F0 Reader’s Resource DB 17W2 DBA17W2PK87F0 (cid:1) For contact cavity arrangements, DB 21W1 DBA21W1PK87F0 see page 222. DC 8W8 DCA8W8PK87F0 (cid:1) For panel cutouts, see page 221. DC 21WA4 DCA21WA4PK87F0 DC 25W3 DCA25W3PK87F0 DD 24W7 DDA24W7PK87F0 DD 36W4 DDA36W4PK87F0 Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275. L 10,92 (.430) K MAX Engaging Face A C 10° B E D Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 80 Dimensions subject to change

D Subminiature Combo D Crimp Cable Connectors without Contacts (Sizes DA-DD) Receptacle Part Numbers Shell Size Layout Part Number DA 7W2 DAA7W2SA197F0 DA 11W1 DAA11W1SA197F0 DA 3W3 DAA3W3SA197F0 DB 5W5 DBA5W5SA197F0 DB 9W4 DBA9W4SA197F0 DB 13W3 DBA13W3SA197F0 Reader’s Resource (cid:1) For contact cavity arrangements, DB 17W2 DBA17W2SA197F0 DB 21W1 DBA21W1SA197F0 see page 223. (cid:1) For panel cutouts, see page 221. DC 8W8 DCA8W8SA197F0 DC 21WA4 DCA21WA4SA197F0 DD 24W7 DDA24W7SA197F0 DD 36W4 DDA36W4SA197F0 Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275. L 10,92 (.430) K MAX Engaging Face A C 10° B E D Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,317 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 81

D Subminiature Combo D Shield Cans Ferrule Ferrule Crimp Tool Crimp Tool XCable XA Part Number Part Number Position 4,8 - 5,5 6,25 (.246) 304-8810-000 D115433-1 B 5,5 - 6,2 6,25 (.246) 304-8810-000 D115433-1 A 6,2 - 7,2 8,20 (.323) 304-8811-000 D115433-2 B 7,2 - 8,2 8,20 (.323) 304-8811-000 D115433-2 A 8,2 - 9,5 11,50 (.452) 304-8812-000 D115433-3 B 9,5 - 11,1 11,50 (.452) 304-8813-000 D115433-3 A Part Numbers Materials and Finishes Top Can (B size): 348-8946-000 Shield Can and Ferrule Bottom Can (B size): 348-8945-000 Material: Steel Note: For other available can sizes, consult factory for details. Finish: Tin (cid:1) Order 1top can, 1bottom can, 1ferrule per connector. FERRULE CABLE Ø 10,00 (.394) 10,10 (.398) Ferrule Wire Trim Dimensions Crimp Tool Positions 11,25(.443) Ø 11,10(.437) Ø A 10,00(.394) 50,00 (1.969) Dimensions are shown in mm (inch) 82 Dimensions subject to change

D Subminiature Combo D Crimp (Size 20) Contacts Loose Contacts Pin Contact Socket Contact Stamped contacts with insulation support are supplied loose for use with hand crimp tooling. Two sizes are available to accommodate wire ranges 20 - 26 AWG. Part Number Part Number Pin Contact Socket Contact Finish 24-26 AWG 20-24 AWG 24-26 AWG 20-24 AWG 30(cid:2)inches Gold over Nickel 030-2487-017 030-2487-016 030-2488-017 030-2488-016 For tooling, see this page. Reeled Contacts (5,000 Pieces per Reel) Pin Contacts Socket Contacts Stamped contacts with insulation support are supplied on reels of 5,000 for use with semi- automatic strip and crimp machines. Two sizes are available to accommodate wire ranges 20 - 26 AWG. Part Number Part Number Pin Contact Socket Contact Finish 24-26 AWG 20-24 AWG 24-26 AWG 20-24 AWG Gold over Nickel 980-2000-925 980-2000-924 980-2000-926 980-2000-923 30(cid:2)inches Gold over Nickel 980-2000-946 980-2000-945 980-2000-944 980-2000-943 For semi-automatic tooling, see page 275. Pin Contacts Socket Contacts Tooling CCT-D*A-1 Hand Crimp Tool Description Part Number CCT-D*A-1 995-2000-000 Extraction Tool Description Part Number Wire Size CIET-D*A-20-24 980-0008-135 20-24 AWG CIET-D*A-24-26 980-0008-136 24-26 AWG For semi-automatic tooling, see page 275. Dimensions are shown in mm (inch) Dimensions subject to change 83

D Subminiature Combo D Cable (Size 8) Loose Contacts — Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (Body, Ferrule, Center Contact) Kit Kit Kit Stamped Crimp/Crimp Gold over Ni 30(cid:2)in. Gold over Ni 50(cid:2)in. Gold over Ni RG Cable Number Plug D130322-2 D130322-1 D130322-6 179/U Receptacle D130344-1 D130344 D130344-2 179/U Loose Components for High Volume (3 Pieces — Body, Ferrule, Center Contact) Center Contact Center Contact Gold over Ni 30(cid:2)in. Gold over Ni Stamped Crimp/Crimp Body Ferrule 10,000 Reel 10,000 Reel Plug 249-2272-000 304-0444-000 110238-1015 110238-1012 Receptacle 249-2271-000 304-0444-000 110238-1014 110238-1013 Tooling for Stamped Crimp/Crimp Description Crimping Tool Tool Number Stamped Center Hand Crimp, ‘‘B’’ Crimp CCTP-750HM Conductor Semi-Automatic Crimper ABT-607 (Leased) Stamped Outer Hand Tool, Hex Crimp CCTP-DM Conductor Pneumatic Hex Crimp 995-2000-094 For semi-automatic tooling, see page 275. Dimensions are shown in mm (inch) 84 Dimensions subject to change

D Subminiature Combo D Cable (Size 8) Loose Contacts — Coaxial 75 Ohm — 90° 90°Crimp Braid/Solder Center Contact Part Number Part Number Part Number Gold over Ni 30(cid:2)in. Gold over Ni 50(cid:2)in. Gold over Ni Plug D130357-1 D130357 D130357-4 Receptacle D130356-1 D130356 D130356-3 17,30 (.680) REF 17,53 (.690) 0,16 (.006) REF REF Ø 4,79(.189) REF 5,10 (.200) REF Plug Receptacle Note: Ferrule not shown. Note: Ferrule not shown. Tooling for 90°Crimp Braid Description Part Number Hand Tool: 995-0001-761 Die Set: 995-2000-110 Dimensions are shown in mm (inch) Dimensions subject to change 85

D Subminiature Combo D Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — Straight Straight Crimp Braid Plug Receptacle Note: Dimensions include outer sleeve. Part Number Part Number 50(cid:2)in. A B D RG Cable Number Gold Over Nickel Gold Over Copper max. max. min. Old New Plug DM53740 DM53740-17 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U Plug DM53740-1 DM53740-15 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U 179B/U 188/U 316B/U Plug DM53740-35 — 18,80 (.739) 24,00 (.945) 1,70 (.067) — RD316 Plug DM53740-3 DM53740-16 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U Plug DM53740-5 DM53740-18 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58B/U Receptacle DM53742 DM53742-18 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U Receptacle DM53742-1 DM53742-16 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U 179B/U 188/U 316B/U Receptacle DM53742-36 — 18,80 (.739) 24,00 (.945) 1,70 (.067) — RD316 Receptacle DM53742-3 DM53742-17 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U Receptacle DM53742-5 DM53742-19 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58B/U For crimp tooling, see page 89. Straight Solder Braid Plug Receptacle Part Number Part Number 50(cid:2)in. A B D RG Cable Number Gold Over Nickel Gold Over Copper max. max. min. Old New Plug DM53740-5008 DM53740-5105 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U Plug DM53740-5001 DM53740-5099 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U 179B/U 188/U 316B/U Plug DM53740-5145 — 18,80 (.739) 24,00 (.945) 1,70 (.067) — RD316 Plug DM53740-5002 DM53740-5104 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U Plug DM53740-5005 DM53740-5101 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58/U Plug (Short Type) DM53740-5000 DM53740-5100 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/U 178B/U Receptacle DM53742-5006 DM53742-5092 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U Receptacle DM53742-5001 DM53742-5089 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U 179B/U 188/U 316B/U Receptacle DM53742-5126 — 18,80 (.739) 24,00 (.945) 1,70 (.067) — RD316 Receptacle DM53742-5002 DM53742-5091 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U Receptacle DM53742-5004 DM53742-5086 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58/U Receptacle (Short Type) DM53742-5000 DM53742-5085 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/U 178B/U Dimensions are shown in mm (inch) 86 Dimensions subject to change

D Subminiature Combo D Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — 90° 90°Crimp Braid Plug Receptacle Note: Dimensions include outer sleeve. Part Number Part Number A B D RG Cable Number Gold Over Nickel 50(cid:2)in. Gold Over Copper max. max. C ±0,13 (.005) Old New Plug DM53741 DM53741-12 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,14 (.045) 196/U 178B/U Plug DM53741-1 DM53741-11 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,83 (.072) 187/U 179B/U 188/U 316B/U Plug DM53741-3 DM53741-10 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U Plug DM53741-4 DM53741-13 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U Receptacle DM53743-2 DM53743-18 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,14 (.045) 196/U 178B/U Receptacle DM53743-3 DM53743-16 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,83 (.072) 187/U 179B/U 188/U 316B/U Receptacle DM53743-5 DM53743-17 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U Receptacle DM53743-6 DM53743-19 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U For crimp tooling, see page 89. 90°Solder Braid Plug Receptacle Part Number Part Number A B D RG Cable Number Gold Over Nickel 50(cid:2)in. Gold Over Copper max. max. C min. Old New Plug DM53741-5000 DM53741-5059 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,00 (.040) 196/U 178B/U Plug DM53741-5001 DM53741-5062 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,70 (.067) 187/U 179B/U 188/U 316B/U Plug DM53741-5003 DM53741-5063 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U Plug DM53741-5004 DM53741-5060 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58/U Receptacle DM53743-5000 DM53743-5073 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,00 (.040) 196/U 178B/U Receptacle DM53743-5001 DM53743-5076 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,70 (.067) 187/U 179B/U 188/U 316B/U Receptacle DM53743-5003 DM53743-5077 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U Receptacle DM53743-5004 DM53743-5074 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U Dimensions are shown in mm (inch) Dimensions subject to change 87

D Subminiature Combo D Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts Insertion Tool Insertion Instructions No insertion tool is required. The contact is easily snapped in from the rear of the connector manually. Extraction Tool CET-C6B-2 Operating Instructions The CET-C6B-2 tool extracts all coaxial, high To extract the coaxial contact, hold the tool by the securely enough to keep coaxial retaining ring power and high voltage contacts (plug and body and insert the tip into the front of the contact closed, push the plunger; contact will be pushed receptacle). cavity until it bottoms and closes the coaxial out of the rear of the assembly. retaining ring. Holding the body in this position Description Part Number CET-C6B-2 070064-0002 Dimensions are shown in mm (inch) 88 Dimensions subject to change

D Subminiature Combo D Coaxial Assembly Instructions Straight and 90°Coaxial Assembly Straight Coaxial 90°Coaxial STEP 1: Slide the outer ring over the cable jacket. Trim the cable as specified in the table of Coaxial Cable Trim Dimensions (see this page). Insert the cable dielectric and center conductor into the inside diameter of the inner sleeve. Then solder the center conductor to the coaxial center contact. Straight and 90°Coaxial Assembly Straight Coaxial 90°Coaxial STEP 2: Slide the outer ring forward until it is flush with the coaxial shell containing the braid between the outer ring and the inner sleeve. For solder type coaxes, soft solder the outer ring to the assembly through the cross-drilled solder hold. For crimp type coaxes, crimp with the appropriate tool in the area defined. Coaxial Cable Trim Dimensions Straight Coaxial 90°Coaxial N O P N O P RG Cable Number ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) 196/U, 178B/U, 187/U, 188/U, 179B/U, 316B/U 7,92 (.312) 6,35 (.250) 1,98 (.078) 9,52 (.375) 5,94 (.234) 1,57 (.062) 195/U, 180B/U, 58/U, 58B/U 9,52 (.375) 7,92 (.312) 1,98 (.078) 10,69 (.422) 7,92 (.312) 2,39 (.094) Crimp Tooling RG Cable Number Tool Part Number Description Closure 196/U, 178B/U 070051-0000 CCT-DM C 187/U, 179B/U, 188/U, 316B/U 070051-0000 CCT-DM B 195/U, 180B/U, 58/U, 58B/U 070051-0000 CCT-DM A Hand tool with integral die set for all coaxial straight crimp braid. Dimensions are shown in mm (inch) Dimensions subject to change 89

D Subminiature Combo D Cable (Size 8) Loose Contacts — High Power — Solder Plug Part Number Part Number Wire Gold Over Nickel 50(cid:2)in. Gold over Ni Current Rating Size DM53745-1 DM53745-28 40 A 8 AWG DM53745-7 DM53745-27 20 A 12 AWG DM53745-8 DM53745-25 10 A 16 AWG Receptacle Part Number Part Number Wire Gold Over Nickel 50(cid:2)in. Gold over Ni Current Rating Size DM53744-1 DM53744-21 40 A 8 AWG DM53744-6 DM53744-25 20 A 12 AWG DM53744-7 DM53744-24 10 A 16 AWG Cable (Size 8) Loose Contacts — High Power — Crimp Plug Recommended Wire Trim Length Part Number Part Number Part Number XA XB Current Wire Gold Over Nickel 30(cid:2)in. Gold over Ni 50(cid:2)in. Gold over Ni max. max. Rating Size DM130338-4 DM130338 DM130338-1 4,60 (.181) 5,84 (.230) 40 A 8 AWG DM130339-4 DM130339 DM130339-1 2,54 (.100) 5,54 (.218) 20 A 12 AWG DM130340-4 DM130340 DM130340-1 1,07 (.067) 2,59 (.102) 10 A 16 AWG Receptacle 20,93 - 20,42 Recommended Wire Trim Length (.824 - .804) Ø B Ø A Part Number Part Number Part Number XA XB Current Wire Gold Over Nickel 30(cid:2)in. Gold over Ni 50(cid:2)in. Gold over Ni max. max. Rating Size DM130341-4 DM130341 DM130341-1 4,60 (.181) 5,84 (.230) 40 A 8 AWG DM130342-4 DM130342 DM130342-1 2,54 (.100) 5,54 (.218) 20 A 12 AWG DM130343-4 DM130343 DM130343-1 1,07 (.067) 2,59 (.102) 10 A 16 AWG High Power Crimp Tooling M300-BT Crimp Tool/Locator Wire Crimp Tool Setting Size Tool Number Locator 8 AWG M300-BT 6 TP968 10 AWG M300-BT 5 TP968 12/14 AWG M300-BT 1 TP968 16 AWG FT-8 6 TH554 18 AWG FT-8 5 TH554 Dimensions are shown in mm (inch) 90 Dimensions subject to change

D Subminiature Combo D Cable (Size 8) Loose Contacts — High Voltage — Straight Plug 18,64 (.734) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Part Number Wire Gold over Ni 50(cid:2)in. Gold Size DM51157 DM51157-8 20 AWG Receptacle 19,41(.764) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Part Number Wire Gold over Ni 50(cid:2)in. Gold Size DM51155 DM51155-7 20 AWG Cable (Size 8) Loose Contacts — High Voltage — 90° Plug 17,70 (.697) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Part Number Wire Gold over Ni 50(cid:2)in. Gold Size DM51157-5000 DM51157-5005 20 AWG Receptacle 17,70 (.697) REF INSULATOR RING, RETAINER For tooling, see page 88. Part Number Part Number Wire Gold over Ni 50(cid:2)in. Gold Size DM51155-5000 DM51155-5004 20 AWG Dimensions are shown in mm (inch) Dimensions subject to change 91

D Subminiature Combo D PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — Straight Plug 17,78 (.700) Ø 0,51 (.020) 5,08 (.200) 4,19 0,25 Description Part Number (.165) (.010) Plug DM130358-2 Receptacle 18,00 (.708) Ø 0,61 (.024) 5,08 (.200) 4,19 0,25 Description Part Number (.165) (.010) Receptacle DM130346-2 PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — 90° Plug 20,32 (.800) 10,26 (.404) 3,81 (.150) Ø 0,51 5,08 (.020) Description Part Number (.200) Plug DM130352-2 Receptacle 20,32 (.800) 10,23 (.403) 3,81 (.150) Ø 0,61 Description Part Number 5,08 (.024) (.200) Receptacle DM130321-3 Dimensions are shown in mm (inch) 92 Dimensions subject to change

D Subminiature Combo D PCB (Size 8) Loose Contacts — High Power — Straight Pin 18,23 ± 0,25 (.718 ± .010) 3,18 ± 0,13 (.125 ± .005) Description Part Number Pin DM53745-110 Socket 18,19 ± 0,25 (.716 ± .010) 3,18 ± 0,13 (.125 ± .005) Description Part Number Socket DM53744-98 PCB (Size 8) Loose Contacts — High Power —90° Pin B A Ø C A B XC Shell Size Part Number ±0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE, DA, DB, DC DM53745-104 10,62 (.418) 26,64 (1.049) 3,18 (.125) DD DM53745-107 13,41 (.528) 26,64 (1.049) 3,18 (.125) European Footprint DE, DA, DB, DC, DD DM53745-120 18,06 (.711) 11,00 (.433) 2,90 (.114) Socket B A Ø C A B XC Shell Size Part Number ±0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE, DA, DB, DC DM53744-92 13,41 (.528) 26,52 (1.044) 3,18 (.125) DD DM53744-95 10,62 (.418) 26,52 (1.044) 3,18 (.125) European Footprint DE, DA, DB, DC, DD DM53744-107 11,00 (.433) 17,93 (.706) 2,90 (.114) Dimensions are shown in mm (inch) Dimensions subject to change 93

D Subminiature Combo D PCB (Size 8) Loose Contacts — High Voltage — Straight Plug 15,95 (.628) REF CONTACT, PIN 5,94 - 5,44 Ø 4,88 (.192) (.234 - .214) MAX 1,52 - 1,27 (.060 - .050) Ø 3,68 - 3,53 Ø 5,72 - 5,33 Ø 1,65 - 1,50 INSULATOR (.145 -.139) (.225 - .210) (.065 - .059) RING, RETAINING Part Number Part Number Gold over Ni 50(cid:2)in. Gold DM51157-13 DM51157-14 Receptacle 16,76 (.660) REF CONTACT, SKT 6,48 - 6,22 Ø 4,88 (.192) (.255 - .245) MAX 0,25 - 0,00 (.010 - .000) INSULATOR Ø 5,72 - 5,33 Ø 1,65 - 1,50 (.225 - .210) (.065 - .059) RING, RETAINING Part Number Part Number Gold over Ni 50(cid:2)in. Gold DM51155-12 DM51155-13 Dimensions are shown in mm (inch) 94 Dimensions subject to change

D Subminiature Combo D PCB Guide Pin and Socket Installs into any Combo D, Size 8 cavity. This guide pin and socket system is ideal for blind mate applications where space is limited. PCB Guide Pin 29,21 (1.150) REF 3,68 - 3,43 (.145 - .135) 11,43 (.450) REF Part Number Material Finish Ø 5,66 - 5,41 (.223 - .213) DM53745-126 Copper Alloy Tin Ø 3,25 - 3,10 (.128 - .122) RING, RETAINING PCB Guide Socket 4,06 (.160) CONNECTOR REAR Part Number Material Finish 16,28 (.641) INSULATOR REF 248-2967-000 Copper Alloy Tin REF Dimensions are shown in mm (inch) Dimensions subject to change 95

D Subminiature Commercial Micro D — MDSM Selection Index Page Commercial Shielded Micro D An Introduction........................................................97 Locking/Latching Options ................................................98 Cable Assemblies — Pigtail...............................................98 PCB Connector 90°— Single or Stacked.....................................99 Cable Connectors (Unassembled Components) ...............................100 Crimp Contacts.......................................................100 Tooling..............................................................101 MDSM SSA Compatible Cable Assemblies...................................102 Dimensions are shown in mm (inch) 96 Dimensions subject to change

D Subminiature Commercial Micro D — MDSM MDSM is the commercial industry’s smallest D-type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional D Subminiature connector, MDSM is designed for situations where space and EMI shielding are the primary design drivers. Unlike other micro connectors, MDSM’s rugged construction and unique contact design combined with a PdNi contact finish provide durability of 10,000 mating cycles. All of this comes in a sleek package that includes a snap together shield can and a slide over boot producing a cable assembly with an overmolded look and a low assembled cost. MDSM is an ideal solution for applications where size, shielding, durability and aesthetics are key design criteria. Applications: (cid:1) Electronic Notepads (cid:1) VME Cards (cid:1) Multiplexors (cid:1) Serial Storage Devices (cid:1) Computer Workstations (cid:1) Hand Held Devices (cid:1) Bar Code Scanners Product Features (cid:1) 1,27 (.050) Pitch / Saves Space (cid:1) Stacked Versions / Saves Horizontal Space Approvals & Certifications (cid:1) Fully Shielded / Reduces EMI (cid:1) Slide Over Boot / Results in Overmolded (cid:1) SSA (Serial Storage Architecture) (cid:1) Crimp Contacts / Applied Cost Savings Appearance (cid:1) U.L. File Number E8572 (cid:1) Accessories Included / Fewer Part Numbers (cid:1) Choice of Two Different Latching Options (cid:1) ISO 9001 (cid:1) PdNi Plating / 10,000 Mating Cycles (Thumbscrew / Push-Pull) Specifications Temperature Rating −55°C to 125°C Current Rating 1 A — temp dependent Contact Resistance 20 m(cid:1)Max. Insulation Resistance 5000 M(cid:1)Min. Dielectric Withstanding Voltage 350 V at Sea Level Durability 10,000 Mating Cycles Shock / Vibration 50 G’s / 50 G’s Wire Size 26 to 30 AWG Materials and Finishes Description Material Finish Shell Steel Nickel Shield Can Steel Tin Cover Steel Tin Insulator Thermoplastic, UL94 V-O None Contacts Copper Alloy Gold flash over 30 microinches PdNi in mating area, Tin on balance Contact Arrangements (Face View of Pin Insert — Use Mirror Image for Socket Side) 9 Contacts 15 Contacts 25 Contacts Dimensions are shown in mm (inch) Dimensions subject to change 97

D Subminiature Commercial Micro D — MDSM Locking/Latching Options Jackscrew Push/Pull The jackscrew locking system is designed for applications which require a The push/pull latching system is designed for applications which require a secure connection. Utilize thumbscrews when the connectors are infrequently quick connect and disconnect. A spring retention mechanism latches to a post unmated. on the board side to prevent unintentional unmatings. Z10 Jackpost Z42 Jackpost 0,52 (.020) #2-56 UNC #2-56 UNC ¯ 3,25 3,18H E(.X125) 1,25 (.049) 6,45 (.128) 1,25 (.049) 6,45 (ACROSS FLATS) (.254) (.254) Note: Two Jackposts supplied with boardside connectors. Note: Two Jackposts supplied with boardside connectors. Dimensions are shown in mm (inch) (cid:9) (cid:8) Dimensions subject to change

D Subminiature Commercial Micro D — MDSM PCB Connector 90°- Single Note: Standard jackpost offering recommended for use with .060 panel. No. of Part Numbers - Single A C D F Contacts Thumbscrew Push/Pull max. B max. max. E ±0,05 (.002) 9 MDSM-9PE-Z10-VR25* MDSM-9E-Z42-VR25* 19,90 (.783) 14,35 (.565) 8,60 (.339) 9,00 (.354) 5,08 (.200) 10,24 (.403) 15 MDSM-15PE-Z10-VR22 MDSM-15PE-Z42-VR22 23,60 (.929) 18,16 (.715) 12,30 (.484) 12,90 (.508) 8,89 (.350) 14,01 (.551) 25 MDSM-25PE-Z10-VR17 MDSM-25PE-Z42-VR17 29,95 (1.179) 24,51 (.965) 18,65 (.734) 19,25 (.758) 15,24 (.600) 20,35 (.801) *For use with SSA applications PCB Connector 90°- Stacked No. of Part Numbers - Stacked A C D Contacts Thumbscrew Push/Pull max. B max. max. E F 18 MDSM-18PE-Z10-VR25* MDSM-18PE-Z42-VR25* 19,90 (.783) 14,35 (.565) 8,60 (.339) 9,00 (.354) 5,08 (.200) 10,24 (.403) 30 MDSM-30PE-Z10-VR22 MDSM-30PE-Z42-VR22 23,50 (.925) 18,16 (.715) 12,30 (.484) 12,71 (.500) 8,89 (.350) 14,00 (.551) *For use with SSA applications Dimensions are shown in mm (inch) Dimensions subject to change 99

D Subminiature Commercial Micro D — MDSM Cable Connectors (Unassembled Components) Jackscrew JACKSCREW HOOD SHELL/SHIELD ASSEMBLY CABLE (CUSTOMER SUPPLIED) CRIMP CONTACTS (PURCHASED SEPARATELY) Cable connectors are supplied as complete kits INSULATOR with insulator, hood, locking hardware, shell/ shield assembly, and cover, bulk packaged. SHELL COVER Push/Pull 8,00 (.315) HOOD D SHELL/SHIELD ASSEMBLY CABLE (CUSTOMER SUPPLIED) Cable connectors are supplied as complete kits CRIMP CONTACTS (PURCHASED with insulator, hood, shell/shield assembly, and SEPARATELY) cover, bulk packaged. INSULATOR SHELL COVER C 5,60 B (.220) 7,50 A (.295) MAX MAX Jackscrew Push/Pull A B C D Max. Layout Part Numbers Part Numbers max. 0,10 (.004) 0,10 (.004) max. Cable Entry 9 MDSM-9SC-Z11-VS1 MDSM-9SC-Z24-VS1 19,90 (.783) 14,35 (.565) 9,45 (.372) 35,50 (1.40) 5,70 (.224) 15 MDSM-15SC-Z11-VS1 MDSM-15SC-Z24-VS1 23,70 (.993) 18,16 (.715) 13,17 (.519) 35,50 (1.40) 6,70 (.264) 25 MDSM-25SC-Z11-VS1 MDSM-25SC-Z24-VS1 30,05 (1.183) 24,51 (.965) 19,52 (.769) 42,50 (1.67) 7,90 (.311) Note: VS1refers to packaging multiples of 100. Contacts are sold separately, see this page. Crimp Contacts Wire Trim Dimensions 0,95 (.037) 2,60 (.102) 15,00 (.591) 25,00 (.984) Part Numbers 1,000 Piece Reel 10,000 Piece Reel Socket MDS-S-TS MDS-S-RL For crimp tooling, see page 101. Dimensions are shown in mm (inch) 100 Dimensions subject to change

D Subminiature Commercial Micro D — MDSM Contact Crimping Tools Parallel Action Low Volume Hand Tool Hand Tool Semi-Automatic Crimper/Stripper Part Number: CCTP-MDS Part Number: CCTR-MDS Part Number: ABT-620-MDS (Lease Only) Note: For use with individual contacts (break off reel Note: For use with reeled contacts - Part Number MDS-S-TS. Note: For use with reeled contacts - Part Number MDS-S-RL. MDS-S-TS or MDS-S-RL. For additional information, see page 275. Crimp dies for SSA Cable will be offered by ITT Cannon. Consult factory for details. Contact Insertion/Extraction Tools Jackpost Tool Insertion Tool Part Number: CIET-MDSM Part Number: 120090-0102 Note: For use with Z10 Jackpost. Note: Contacts cannot be removed from MDSM connectors. Shield Crimp Tooling (cid:1) Shield crimping requires four items; one Hand Press Pneumatic Press press, one locator, and one each of the two dies listed below. (cid:1) Locator and Dies for Shield Termination Ordered Separately Part Numbers Layout Locator Die 9 317-8666-013 274-8649-332/274-8649-333 15 317-8666-014 274-8649-334/274-8649-335 25 317-8666-016 274-8649-338/274-8649-339 Note: For assembly instructions and crimping information, refer to Manual #MY-1/190. Part Number: CHP-MDSM-SR Part Number: CPT-MDSM-SR Dimensions are shown in mm (inch) Dimensions subject to change 101

D Subminiature Commercial Micro D — MDSM MDSM SSA Compatible Cable Assemblies ITT Cannon’s 9 position MDSM connectors have interfaces. SSA permits the transfer of data at been designed into the ANSI specification called progressively higher speeds - 20 MB/sec interface SSA, ‘‘Serial Storage Architecture,’’ as the external currently available with 40 MB/sec becoming I/O. SSA is a new serial interface for available in 1997/98. ITT Cannon’s MDSM interconnecting storage devices, storage connector not only functions at these high speeds, subsystems, servers and workstations. Storage but also brings to SSA smaller, less cumbersome subsystems are increasing in function, availability, and higher reliability cables and connectors than density and performance. With this comes the current options. trend for them to become more complex and ITT Cannon has the interconnect system which ITT Cannon is offering SSA compatable external meets SSA’s high performance requirements. cable assemblies in six different lengths to meet your needs. These assemblies consist of two SSA is an architecture which allows these new MDSM 9SC type cable connectors terminated to subsystems to be implemented more easily and at SSA specified external cable. lower costs than other new high speed parallel X 5,71 (.225) 19,89 (M.7A83X) (1.45,6355) P1 P2 41,62 (1.639) MAX 56,01 (2.205) REF Note: Cables shown with Z50 thumbscrews. X Part Number Meter (Feet) Tolerance CA112104 0,50 (1.600) ±25,00 (1.000) CA112104-1 1,00 (2.200) ±25,00 (1.000) CA112104-2 3,00 (9.800) ±25,00 (1.000) CA112104-3 5,00 (16.400) ±64,00 (2.500) CA112104-4 10,00 (32.800) ±64,00 (2.500) CA112104-5 20,00 (65.600) ±64,00 (2.500) Note: For push/pull assemblies or other thumbscrews, please consult the factory. Crimp dies for SSA applications will be offered by ITT Cannon. Consult factory for details. Dimensions are shown in mm (inch) 102 Dimensions subject to change

D Subminiature Commercial Micro D — MDSM Pinout SSA External Cable Wiring Table P1 P2 CONTACT #9 CONTACT #5 1 1 2 2 3 3 4 4 CONTACT #6 CONTACT #1 5 5 6 6 7 7 8 8 9 9 8,51 (.335) MAX Note: Shield connected to both shells. External Cable Pinouts P1 P2 Pin Signal Name Pin Signal Name 2 LineOut− 4 LineIn− 6 LineOut+ 9 LineIn+ 4 LineIn− 2 LineOut− 9 LineIn+ 6 LineOut+ Note: Pins 1, 3, 5, 7 and 8 are not connected. SSA External Cable Wire Cross Section (For Reference Only) CONDUCTOR INSULATION Ø 5,72 FILLER (.225) Ø 1,57 INNER SHIELD (.062) OUTER SHIELD JACKET Transfer Impedance Performance Requirements for External SSA Connections Frequency MHz Value (dB-Ohm)(max.) 30 −25 159 −16 500 −10 Dimensions are shown in mm (inch) Dimensions subject to change 103

D Subminiature Filter D Selection Index Page Filter D An Introduction to D*JK and D*JT ........................................105 D*JK Filter Performance and Electrical Data................................106 D*JT Filter Performance and Electrical Data ................................107 D*JK Connectors (cid:2) (cid:2)(cid:2) Standard Footprint .318 or .283 inches 90°PC Tails......................................................108 90°PC Tails, Metal Brackets..........................................112 (cid:2) (cid:2)(cid:2) European Footprint 10,2 or 9,4 mm 90°PC Tails......................................................110 90°PC Tails, Metal Brackets..........................................114 90°PC Tails, Plastic Brackets & Grounding Straps .........................116 90°PC Tails, Plastic Brackets.........................................118 Straight PC Tails...................................................120 D*JT Connectors Solder Cup.........................................................122 Combo — High Power 90°.............................................124 Combo — High Power Straight..........................................126 Combo — High Power Solder Cup.......................................128 (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 104 Dimensions subject to change

D Subminiature Filter D D*JK/D*JT Filter connectors series D*JK and D*JT from ITT Cannon especially designed for commercial applications provide excellent protection against EMI and RFI. Using D Subminiature standard components a cost-effective production can be achieved as well as 100% compatibility with equivalent products according to DIN 41652. D Subminiature standard accessories can be used. High quality tubular ceramic capacitors are assembled onto the D*JK contacts and soldered to contact and backshell while series D*JT connectors apply planar array filters. Applications: (cid:1) EMI/RFI Sensitive Electronics (cid:1) Test & Measurement Equipment (cid:1) Computer Equipment (cid:1) Medical Equipment (cid:1) Telecommunication Transmission Product Features (cid:1) HF–tightness and mechanical stability by (cid:1) Straight and 90°solder pins (D*JK) (cid:1) Versatile mounting possibilities (brackets, closed backshell (cid:1) Solder cups, straight and 90°solder pins captive nuts) (cid:1) Free-stamped grounding fingers (pin (D*JT) (cid:1) Contact finsh according to performance connector only) class 2 (standard) or class 1 Specifications Temperature Range Per DIN IEC 68 Part 1 −55°C to 125°C Materials and Finishes Description Material Finish Shell Steel Tin Insulator Thermoplastic, UL 94V-0 None Contacts Copper Alloy Gold over Nickel Mechanical Data Coupling Friction, accessories Polarization Keystone shape of shell Termination PC tails, straight and 90° Solder cups Dimensions are shown in mm (inch) Dimensions subject to change 105

D Subminiature Filter D D*JK Filter Performance D*JK Electrical Data Voltage rating (working) 100 VDC Current rating 5 A Insulation resistance, electrification time 30 s, temperature 25°C 5000 M(cid:1)min./100 V Dielectric Withstanding Voltage (Sea Level) 500 micro amps max. charge/discharge 250 VDC Filter Type C Capacitor Filter Symbol per DIN Filter designation 5 4 3 2 1 Capacitance, type at 1 KHz, 0,1 Vrms, 25°C 1500 pF 1000 pF 680 pF 470 pF 330 pF Frequency Attenuation Attenuation Attenuation Attenuation Attenuation MHz db min. db min. db min. db min. db min. 10 3 — — — — 30 20 14 10 7 2 100 31 27 22 18 9 300 39 35 30 27 18 1000 47 42 37 32 28 2000 51 46 42 36 31 Attenuation per MIL-STD-220 at 25°C with no applied voltage or current Dimensions are shown in mm (inch) 106 Dimensions subject to change

D Subminiature Filter D D*JT Filter Performance D*JT Electrical Data Voltage rating (working) 200 VDC/120 Vrms, 400 Hz Current rating 5 A (Size 20 contacts), 30 A (Size 8 contacts) Insulation resistance, electrification time 30 s, temperature 25°C 10,000 M(cid:1)min./100 V Dielectric Withstanding Voltage (Sea Level) 500 micro amps max. charge/discharge 500 VDC Filter type C Capacitor Filter symbol per DIN Filter designation 9 5 4 6 1 2 3 Capacitance, type at 1 KHz, 0,1 Vrms, 25°C 47000 pF 5000 pF 2000 pF 1500 pF 1000 pF 500 pF 250 pF Frequency Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation MHz db min. db min. db min. db min. db min. db min. db min. 5 30 11 6 3 — — — 10 37 16 10 7 5 2 1 100 50 35 27 23 20 16 14 1000 45 54 48 46 42 37 35 2000 — 64 60 — 60 60 60 5000 — 64 64 — 64 64 64 Attenuation per MIL-STD-220 at 25°C with no applied voltage or current Dimensions are shown in mm (inch) Dimensions subject to change 107

D Subminiature Filter D D*JK — 90°PC Tails — Standard Footprint .318(cid:2)or .283 inch (cid:2)(cid:2) Plug Part Numbers Clinch Nut Shell Size Layout Through Hole #4-40 UNC DE 9 DEJK9P*-1U0N DEJKE9P*-1U0N DA 15 DAJK15P*-1U0N DAJKE15P*-1U0N DB 25 DBJK25P*-1U0N DBJKE25P*-1U0N DC 37 DCJK37P*-1U0N DCJKE37P*-1U0N * Insert filter designator. Example: DEJK9P4-1U0N (For 1000 pF Filter Capacitance) Note: For performance class 1add -A190. Example: DEJK9P1-1U0N-A190 Filter Designator* Filter Capacitance 1 330 pF Reader’s Resource 2 470 pF (cid:1) For contact cavity arrangements, 3 680 pF see page 224. (cid:1) For P.C. hole patterns, see page 272. 4 1000 pF (cid:1) For panel cutouts, see page 221. 5 1500 pF (cid:1) For hardware views (European), For electrical data, see page 106. see page 227. Engaging Face 3,50 (.138) 2,84 (.112) 7,19 (.283) F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,37 (.015) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,72 (.422) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,72 (.422) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 108 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails — Standard Footprint .318(cid:2)or .283 inch (cid:2)(cid:2) Receptacle Part Numbers Clinch Nut Shell Size Layout Through Hole #4-40 UNC DE 9 DEJK9S*-1U0N DEJKE9S*-1U0N DA 15 DAJK15S*-1U0N DAJKE15S*-1U0N DB 25 DBJK25S*-1U0N DBJKE25S*-1U0N DC 37 DCJK37S*-1U0N DCJKE37S*-1U0N * Insert filter designator. Example: DEJK9S4-1U0N (for 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S1-1U0N-A190 Filter Designator* Filter Capacitance Reader’s Resource 1 330 pF (cid:1) For contact cavity arrangements, 2 470 pF see page 224. (cid:1) For P.C. hole patterns, see page 272. 3 680 pF (cid:1) For panel cutouts, see page 221. 4 1000 pF (cid:1) For hardware views (European), 5 1500 pF see page 227. For electrical data, see page 106. Engaging Face 3,50 (.138) 2,84 (.112) 7,19 (.283) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 109

D Subminiature Filter D D*JK — 90°PC Tails — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Clinch Nut Clinch Nut Shell Size Layout Through Hole #4-40 UNC M3 DE 9 DEJK9P*-1A0N DEJKE9P*-1A0N DEJKX9P*-1A0N DA 15 DAJK15P*-1A0N DAJKE15P*-1A0N DAJKX15P*-1A0N DB 25 DBJK25P*-1A0N DBJKE25P*-1A0N DBJKX25P*-1A0N DC 37 DCJK37P*-1A0N DCJKE37P*-1A0N DCJKX37P*-1A0N * Insert filter designator. Example: DEJK9P4-1A0N (For 1000 pF Filter Capacitance) Modifier: For performance class 1add -A190. Example: DEJK9P1-1A0N-A190 Filter Designator* Filter Capacitance Reader’s Resource 1 330 pF (cid:1) For contact cavity arrangements, 2 470 pF see page 224. (cid:1) For P.C. hole patterns, see page 273. 3 680 pF (cid:1) For panel cutouts, see page 221. 4 1000 pF (cid:1) For hardware options (European), 5 1500 pF see page 227. For electrical data, see page 106. Engaging Face A C Ø 3,05 (.120) 10° B 1 8 E D 9 15 Ø 0,60 (.024) 2,54 (.100) 4,73 (.186) 9,40 (.370) F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,37 (.015) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,72 (.422) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,72 (.422) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 110 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Clinch Nut Clinch Nut Shell Size Layout Through Hole #4-40 UNC M3 DE 9 DEJK9S*-1A0N DEJKE9S*-1A0N DEJKX9S*-1A0N DA 15 DAJK15S*-1A0N DAJKE15S*-1A0N DAJKX15S*-1A0N DB 25 DBJK25S*-1A0N DBJKE25S*-1A0N DBJKX25S*-1A0N DC 37 DCJK37S*-1A0N DCJKE37S*-1A0N DCJKX37S*-1A0N * Insert filter designator. Example: DEJK9S4-1A0N (for 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S1-1A0N-A190 Filter Designator* Filter Capacitance Reader’s Resource 1 330 pF (cid:1) For contact cavity arrangements, 2 470 pF see page 224. (cid:1) For P.C. hole patterns, see page 273. 3 680 pF (cid:1) For panel cutouts, see page 221. 4 1000 pF (cid:1) For hardware options (European), 5 1500 pF see page 227. For electrical data, see page 106. Engaging Face 2,54 (.100) 4,73 (.186) 9,40 (.370) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 111

D Subminiature Filter D D*JK — 90°PC Tails and Metal Brackets — Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2) Plug Part Numbers Bracket, Reader’s Resource Bracket, #4-40 Nut, (cid:1) For contact cavity arrangements, Shell Size Layout #4-40 Nut Boardlock see page 224. DE 9 DEJK9P*-1U7N DEJK9P*-1U7N-146 (cid:1) For P.C. hole patterns, see page 273. DA 15 DAJK15P*-1U7N DAJK15P*-1U7N-146 (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), DB 25 DBJK25P*-1U7N DBJK25P*-1U7N-146 DC 37 DCJK37P*-1U7N DCJK37P*-1U7N-146 see page 227. (cid:1) For alternate bracket configuration (when Insert filter designator *. Example: DEJK9P4-1U7N-146 (For 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9P4-1U7N-A190-146 connectors are supplied without boardlocks), see page 226. (cid:1) For pushfit/boardlock configuration, see page 225. Filter Designator* Filter Capacitance 1 330 pF 2 470 pF 3 680 pF 4 1000 pF 5 1500 pF For electrical data, see page 106. Engaging Face BRACKET, 3,50 (.138) METAL 2,84 (.112) BUSHING 7,19 (.283) F W L Boardlock removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 112 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails and Metal Brackets — Standard Footprint .318(cid:2)or .283 inch(cid:2)(cid:2) Receptacle Part Numbers Bracket, Reader’s Resource Bracket, #4-40 Nut, (cid:1) For contact cavity arrangements, Shell Size Layout #4-40 Nut Boardlock see page 224. DE 9 DEJK9S*-1U7N DEJK9S*-1U7N-146 (cid:1) For P.C. hole patterns, see page 273. DA 15 DAJK15S*-1U7N DAJK15S*-1U7N-146 (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (European), DB 25 DBJK25S*-1U7N DBJK25S*-1U7N-146 DC 37 DCJK37S*-1U7N DCJK37S*-1U7N-146 see page 227. (cid:1) For alternate bracket configuration (when Insert filter designator *. Example DEJK9S4-1U7N-146 (For 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S4-1U7N-A190-146 connectors are supplied without boardlocks), see page 226. (cid:1) For pushfit/boardlock configuration, see page 225. Filter Designator* Filter Capacitance 1 330 pF 2 470 pF 3 680 pF 4 1000 pF 5 1500 pF For electrical data, see page 106. Engaging Face A C 10° B 8 1 E D 15 9 2,89 (.114) 0,60 (.024) BOARDLOCK BRACKET, 3,50 (.138) METAL 2,84 (.112) BUSHING 7,19 (.283) F W L Boardlock removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 113

D Subminiature Filter D D*JK — 90°PC Tails and Metal Brackets — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9P*-1AFN DEJK9P*-1A7N DEJK9P*-1A9N DEJK9P*-1A8N DEJK9P*-1AHN DAJK15P*-1AFN DAJK15P*-1A7N DAJK15P*-1A9N DAJK15P*-1A8N DAJK15P*-1AHN DBJK25P*-1AFN DBJK25P*-1A7N DBJK25P*-1A9N DBJK25P*-1A8N DBJK25P*-1AHN DCJK37P*-1AFN DCJK37P*-1A7N DCJK37P*-1A9N DCJK37P*-1A8N DCJK37P*-1AHN * Insert filter designator. Example: DEJK9P4-1A7N (For 1000 pF capacitance) Notes: For performance class 1add -A190. Example: DEJK9P1-1AFN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1AFN-A190-146 Filter Designator* Filter Capacitance Reader’s Resource (cid:1) For contact cavity arrangements, 1 330 pF see page 224. 2 470 pF (cid:1) For P.C. hole patterns, see page 273. 3 680 pF (cid:1) For panel cutouts, see page 221. 4 1000 pF (cid:1) For hardware views (European), 5 1500 pF see page 227. For electrical data, see page 106. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For pushfit/boardlock configuration, see page 225. Engaging Face A C 10° B 1 8 E D 9 15 2,89 (.114) 1,00 (.039) BOARDLOCK Ø 0,60 (.024) 3,70 (.146) BRACKET, METAL 2,54 (.100) BUSHING 9,40 (.370) F W L Boardlock removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 114 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails and Metal Brackets — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9S*-1AFN DEJK9S*-1A7N DEJK9S*-1A9N DEJK9S*-1A8N DEJK9S*-1AHN DAJK15S*-1AFN DAJK15S*-1A7N DAJK15S*-1A9N DAJK15S*-1A8N DAJK15S*-1AHN DBJK25S*-1AFN DBJK25S*-1A7N DBJK25S*-1A9N DBJK25S*-1A8N DBJK25S*-1AHN DCJK37S*-1AFN DCJK37S*-1A7N DCJK37S*-1A9N DCJK37S*-1A8N DCJK37S*-1AHN * Insert filter designator. Example: DEJK9S4-1A7N (For 1000 pF capacitance) Notes: For performance class 1add -A190. Example: DEJK9S1-1AFN-A190 For pushfit/boardlocks add -146. Example: DEJK9S1-1AFN-A190-146 Filter Designator* Filter Capacitance Reader’s Resource 1 330 pF (cid:1) For contact cavity arrangements, 2 470 pF see page 224. 3 680 pF (cid:1) For P.C. hole patterns, see page 273. 4 1000 pF (cid:1) For panel cutouts, see page 221. 5 1500 pF (cid:1) For hardware views (European), For electrical data, see page 106. see page 227. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For pushfit/boardlock configuration, see page 225. Engaging Face A C 10° B 8 1 E D 15 9 2,89 (.114) 1,00 (.039) BOARDLOCK Ø 0,60 (.024) 3,70 (.146) BRACKET, METAL 2,54 (.100) BUSHING 9,40 (.370) F W L Boardlock removed for clarity Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 115

D Subminiature Filter D D*JK — 90°PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9P*-1ADN DEJK9P*-1AWN DEJK9P*-1AVN DEJK9P*-1AJN DEJK9P*-1AGN DAJK15P*-1ADN DAJK15P*-1AWN DAJK15P*-1AVN DAJK15P*-1AJN DAJK15P*-1AGN DBJK25P*-1ADN DBJK25P*-1AWN DBJK25P*-1AVN DBJK25P*-1AJN DBJK25P*-1AGN DCJK37P*-1ADN DCJK37P*-1AWN DCJK37P*-1AVN DCJK37P*-1AJN DCJK37P*-1AGN * Insert filter designator. Example: DEJK9P4-1AWN (For 1000 pF capacitance) Notes: For performance class 1add -A190. Example: DEJK9P1-1ADN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146 Reader’s Resource (cid:1) For contact cavity arrangements, Filter Designator* Filter Capacitance see page 224. 1 330 pF (cid:1) For P.C. hole patterns, see page 273. 2 470 pF (cid:1) For panel cutouts, see page 221. 3 680 pF (cid:1) For hardware views (European), 4 1000 pF see page 227. (cid:1) For pushfit/boardlock configuration, 5 1500 pF see page 225. For electrical data, see page 106. Engaging Face A C 10° B 1 8 E D 9 15 1,00 (.039) Ø 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING 3,70 (.146) STRAP 2,54 (.100) 9,40 (.370) F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 116 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9S*-1ADN DEJK9S*-1AWN DEJK9S*-1AVN DEJK9S*-1AJN DEJK9S*-1AGN DAJK15S*-1ADN DAJK15S*-1AWN DAJK15S*-1AVN DAJK15S*-1AJN DAJK15S*-1AGN DBJK25S*-1ADN DBJK25S*-1AWN DBJK25S*-1AVN DBJK25S*-1AJN DBJK25S*-1AGN DCJK37S*-1ADN DCJK37S*-1AWN DCJK37S*-1AVN DCJK37S*-1AJN DCJK37S*-1AGN * Insert filter designator. Example: DEJK9S4-1AWN (For 1000 pF capacitance) Notes: For performance class 1add -A190. Example: DEJKS1-1ADN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146 Reader’s Resource Filter Desginator* Filter Capacitance (cid:1) For contact cavity arrangements, 1 330 pF see page 224. 2 470 pF (cid:1) For P.C. hole patterns, see page 273. 3 680 pF (cid:1) For panel cutouts, see page 221. 4 1000 pF (cid:1) For hardware views (European), 5 1500 pF see page 227. (cid:1) For pushfit/boardlock configuration, For electrical data, see page 106. see page 225. Engaging Face A C 10° B 8 1 E D 15 9 1,00 (.039) Ø 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING 3,70 (.146) STRAP 2,54 (.100) 9,40 (.370) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 117

D Subminiature Filter D D*JK — 90°PC Tails & Plastic Brackets — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Plug Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9P*-1A5N DEJK9P*-1AUN DEJK9P*-1ATN DEJK9P*-1A6N DEJK9P*-1APN DAJK15P*-1A5N DAJK15P*-1AUN DAJK15P*-1ATN DAJK15P*-1A6N DAJK15P*-1APN DBJK25P*-1A5N DBJK25P*-1AUN DBJK25P*-1ATN DBJK25P*-1A6N DBJK25P*-1APN DCJK37P*-1A5N DCJK37P*-1AUN DCJK37P*-1ATN DCJK37P*-1A6N DCJK37P*-1APN * Insert filter designator. Example: DEJK9P4-1A5N (For 1000 pF filter capacitance) Notes: For performance class 1add -A190. Example: DEJK9P1-1A5N-A190 For pushfit/boardlocks add-146. Example: DEJK9P1-1A5N-A190-146 Reader’s Resource (cid:1) For contact cavity arrangements, Filter Designator* Filter Capacitance see page 224. 1 330 pF (cid:1) For P.C. hole patterns, see page 273. 2 470 pF (cid:1) For panel cutouts, see page 221. 3 680 pF (cid:1) For hardware views (European), 4 1000 pF see page 227. 5 1500 pF (cid:1) For pushfit/boardlock configuration, For electrical data, see page 106. see page 225. Engaging Face A C 10° B 1 8 E D 9 15 1,00 (.039) Ø 0,60 (.024) BRACKET, 3,70 (.146) PLASTIC 2,54 (.100) 9,40 (.370) F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0.13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,37 (.015) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) 118 Dimensions subject to change

D Subminiature Filter D D*JK — 90°PC Tails and Plastic Brackets — European Footprint 10,2(cid:2)or 9,4 mm(cid:2)(cid:2) Receptacle Part Numbers Bushing with Captive Nut Captive Nut Post Post Through Hole #4-40 UNC M3 #4-40 UNC M3 DEJK9S*-1A5N DEJK9S*-1AUN DEJK9S*-1ATN DEJK9S*-1A6N DEJK9S*-1APN DAJK15S*-1A5N DAJK15S*-1AUN DAJK15S*-1ATN DAJK15S*-1A6N DAJK15S*-1APN DBJK25S*-1A5N DBJK25S*-1AUN DBJK25S*-1ATN DBJK25S*-1A6N DBJK25S*-1APN DCJK37S*-1A5N DCJK37S*-1AUN DCJK37S*-1ATN DCJK37S*-1A6N DCJK37S*-1APN * Insert filter designator. Example: DEJK9S4-1A5N (for 1000 pF filter capacitance) Notes: For performance class 1add -A190. Example: DEJK9S1-1A5N-A190 For pushfit/boardlocks add -146. Example: DEJK9S1-1A5N-A190-146 Reader’s Resource Filter Designator* Filter Capacitance (cid:1) For contact cavity arrangements, 1 330 pF see page 224. (cid:1) For P.C. hole patterns, see page 273. 2 470 pF (cid:1) For panel cutouts, see page 221. 3 680 pF (cid:1) For hardware views (European), 4 1000 pF see page 227. 5 1500 pF (cid:1) For pushfit/boardlock configuration, For electrical data, see page 106. see page 225. Engaging Face A C 10° B 8 1 E 15 9 D 1,00 (.039) Ø 0,60 (.024) BRACKET, 3,70 (.146) PLASTIC 2,54 (.100) 9,40 (.370) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) (cid:2)Connector footprint measured from the front shell. (cid:2)(cid:2)Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 119

D Subminiature Filter D D*JK — Straight P.C. Tails Plug Part Numbers Clinch Nut Clinch Nut Pushfit/Boardlock Pushfit/Boardlock Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC M3 DE 9 DEJK9P*-OL4 DEJKE9P*-OL4 DEJKX9P*-OL4 DEJKE9P*-OL4-146 DEJKX9P*-OL4-146 DA 15 DAJK15P*-OL4 DAJKE15P*-OL4 DAJKX15P*-OL4 DAJKE15P*-OL4-146 DAJKX15P*-OL4-146 DB 25 DBJK25P*-OL4 DBJKE25P*-OL4 DBJKX25P*-OL4 DBJKE25P*-OL4-146 DBJKX25P*-OL4-146 DC 37 DCJK37P*-OL4 DCJKE37P*-OL4 DCJKX37P*-OL4 DCJKE37P*-OL4-146 DCJKX37P*-OL4-146 DD 50 DDJK50P*-OL4 DDJKE50P*-OL4 DDJKX50P*-OL4 DDJKE50P*-OL4-146 DDJKX50P*-OL4-146 * Insert filter designator. Example: DEJK9P4-0L4 (for 1000 pF filter capacitance) Note: For performance class 1add -A190. Example: DEJK9P1-0L4-A190 Reader’s Resource Filter Designator* Filter Capacitance (cid:1) For contact cavity arrangements, 1 330 pF see page 224. 2 470 pF (cid:1) For P.C. hole patterns, see page 274. 3 680 pF (cid:1) For panel cutouts, see page 221. (cid:1) For Hardware views (European), 4 1000 pF 5 1500 pF see page 227. (cid:1) For pushfit/boardlock configuration, For electrical data, see page 106. see page 225. Engaging Face DD Configuration A 5,68 (.224) C Ø 3,05 (.120) 2,84 (.112) 10° B 1 8 E D 9 15 L Ø 0,60 (.024) 2,84 (.112) 11,70 ± 0,20 (.461 ± .008) F W Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.439) 15,37 (.607) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 120 Dimensions subject to change

D Subminiature Filter D D*JK — Straight P.C. Tails Receptacle Part Numbers Clinch Nut Clinch Nut Pushfit/Boardlock Pushfit/Boardlock Shell Size Layout Through Hole #4-40 UNC M3 #4-40 UNC M3 DE 9 DEJK9S*-OL4 DEJKE9S*-OL4 DEJKX9S*-OL4 DEJKE9S*-OL4-146 DEJKX9S*-OL4-146 DA 15 DAJK15S*-OL4 DAJKE15S*-OL4 DAJKX15S*-OL4 DAJKE15S*-OL4-146 DAJKX15S*-OL4-146 DB 25 DBJK25S*-OL4 DBJKE25S*-OL4 DBJKX25S*-OL4 DBJKE25S*-OL4-146 DBJKX25S*-OL4-146 DC 37 DCJK37S*-OL4 DCJKE37S*-OL4 DCJKX37S*-OL4 DCJKE37S*-OL4-146 DCJKX37S*-OL4-146 * Insert filter designator. Example: DEJK9S4-OL4 (for 1000 pF filter capacitance) Note: For performance class 1add -A190. Example: DEJK9S1-OL4-A190 Filter Designator* Filter Capacitance Reader’s Resource 1 330 pF (cid:1) For contact cavity arrangements, 2 470 pF see page 224. 3 680 pF (cid:1) For P.C. hole patterns, see page 274. 4 1000 pF (cid:1) For panel cutouts, see page 221. 5 1500 pF (cid:1) For Hardware views (European), For electrical data, see page 106. see page 227. (cid:1) For pushfit/boardlock configuration, see page 225. Engaging Face A C Ø 3,05 (.120) 10° B 8 1 E D 15 9 Ø 0,60 (.024) 2,84 (.112) 11,70 ± 0,20 (.461 ± .008) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 121

D Subminiature Filter D D*JT — Solder Cup Plug Part Numbers Shell Size Layout Through Hole Clinch Nut #4-40 UNC Clinch Nut M3 DE 9 DEJT9P* DEJTE9P* DEJTX9P* DA 15 DAJT15P* DAJTE15P* DAJTX15P* DB 25 DBJT25P* DBJTE25P* DBJTX25P* DC 37 DCJT37P* DCJTE37P* DCJTX37P* * Insert filter designator. Example: DCJT37P4 (for 2000 pF filter capacitance) Note: For performance class 1add -A190. Example: DCJT37P1-A190 Reader’s Resource Filter Designator* Filter Capacitance (cid:1) For contact cavity arrangements, 1 1000 pF see page 224. 2 500 pF (cid:1) For panel cutouts, see page 221. 3 250 pF (cid:1) For hardware views (European), 4 2000 pF see page 227. 5 5000 pF For electrical data, see page 107. Engaging Face 2,84 (.112) 9,80 (.386) MAX F W L Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0.13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,37 (.015) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 122 Dimensions subject to change

D Subminiature Filter D D*JT — Solder Cup Receptacle Part Numbers Shell Size Layout Through Hole Clinch Nut #4-40 UNC Clinch Nut M3 DE 9 DEJT9S* DEJTE9S* DEJTX9S* DA 15 DAJT15S* DAJTE15S* DAJTX15S* DB 25 DBJT25S* DBJTE25S* DBJTX25S* DC 37 DCJT37S* DCJTE37S* DCJTX37S* * Insert filter designator. Example: DEJT9S4 (for 2000 pF filter capacitance) Note: For performance class 1add -A190. Example: DEJT9S1-A190 Filter Designator* Filter Capacitance 1 1000 pF Reader’s Resource 2 500 pF (cid:1) For contact cavity arrangements, 3 250 pF see page 224. (cid:1) For panel cutouts, see page 221. 4 2000 pF (cid:1) For hardware views (European), 5 5000 pF see page 227. For electrical data, see page 107. Engaging Face A C Ø 3,05 (.120) B POSITION 1 E D 10° 2,84 (.112) 9,80 (.386) MAX F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 123

D Subminiature Filter D D*JT Combo — High Power 90° Plug Part Numbers Filter Clinch Nut Clinch Nut Reader’s Resource Capacitance Through Hole #4-40 UNC M3 (cid:1) For contact cavity arrangements, 1000 pF DAJT3W3P1-1A0N DAJTE3W3P1-1A0N DAJTX3W3P1-1A0N see page 222. 1500 pF DAJT3W3P6-1A0N DAJTE3W3P6-1A0N DAJTX3W3P6-1A0N (cid:1) For P.C. hole patterns, see page 250. 5000 pF DAJT3W3P5-1A0N DAJTE3W3P5-1A0N DAJTX3W3P5-1A0N (cid:1) For panel cutouts, see page 221. 47000 pF DAJT3W3P9-1A0N DAJTE3W3P9-1A0N DAJTX3W3P9-1A0N (cid:1) For hardware views (European), Note: For performance class 1add -A190. Example: DAJT3WK3P6-1A0N-A190 see page 227. Part Numbers — Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3P1-1A0N DAJTE3WK3P1-1A0N DAJTX3W3KP1-1A0N 1500 pF DAJT3WK3P6-1A0N DAJTE3WK3P6-1A0N DAJTX3WK3P6-1A0N 5000 pF DAJT3WK3P5-1A0N DAJTE3WK3P5-1A0N DAJTX3WK3P5-1A0N 47000 pF DAJT3WK3P9-1A0N DAJTE3WK3P9-1A0N DAJTX3WK3P9-1A0N Note: For performance class 1add -A190. Example: DAJT3WK3P6-1A0N-A190 For electrical data, see page 107. Engaging Face Keyed Configuration Engaging Face A A C Ø 3,05 (.120) C Ø 3,05 (.120) 10° B 10° B A1 A3 A1 A3 E D E D Ø 2,60 (.102) Ø 2,60 (.102) 12,30 (.484) F L W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,25 (.010) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) Dimensions are shown in mm (inch) 124 Dimensions subject to change

D Subminiature Filter D D*JT Combo — High Power 90° Receptacle Part Numbers Filter Clinch Nut Clinch Nut Reader’s Resource Capacitance Through Hole #4-40 UNC M3 (cid:1) For contact cavity arrangements, 1000 pF DAJT3W3S1-1A0N DAJTE3W3S1-1A0N DAJTX3W3S1-1A0N see page 223. (cid:1) For P.C. hole patterns, see page 252. 1500 pF DAJT3W3S6-1A0N DAJTE3W3S6-1A0N DAJTX3W3S6-1A0N (cid:1) For panel cutouts, see page 221. 5000 pF DAJT3W3S5-1AON DAJTE3W3S5-1AON DAJTX3W3S5-1AON (cid:1) For hardware views (European), 47000 pF DAJT3W3S9-1A0N DAJTE3W3S9-1A0N DAJTX3W3S9-1A0N see page 227. Note: For performance class 1add -A190. Example: DAJT3W3S9-1AON-A190 Part Numbers — Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3S1-1A0N DAJTE3WK3S1-1A0N DAJTX3WK3S1-1A0N 1500 pF DAJT3WK3S6-1A0N DAJTE3WK3S6-1A0N DAJTX3WK3S6-1A0N 5000 pF DAJT3WK3S5-1AON DAJTE3WK3S5-1AON DAJTX3WK3S5-1AON 47000pF DAJT3WK3S9-1A0N DAJTE3WK3S9-1A0N DAJTX3WK3S9-1A0N Note: For performance class 1add -A190. Example: DAJT3WK3S9-1AON-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A C C 10° B Ø 3,05 (.120) 10° B Ø 3,05 (.120) A3 A1 A3 A1 E D E D 2,60 (.102) 2,60 (.102) 12,30 (.484) F L W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 125

D Subminiature Filter D D*JT Combo — High Power Straight Plug Part Numbers Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3W3P1-OL4 DAJTE3W3P1-OL4 DAJTX3W3P1-OL4 1500 pF DAJT3W3P6-OL4 DAJTE3W3P6-OL4 DAJTX3W3P6-OL4 5000 pF DAJT3W3P5-OL4 DAJTE3W3P5-OL4 DAJTX3W3P5-OL4 47000 pF DAJT3W3P9-OL4 DAJTE3W3P9-OL4 DAJTX3W3P9-OL4 Note: For performance class 1add -A190. Example: DAJT3W3P6-OL4-A190 Part Numbers — Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3P1-OL4 DAJTE3WK3P1-OL4 DAJTX3WK3P1-OL4 Reader’s Resource (cid:1) For contact cavity arrangements, 1500 pF DAJT3WK3P6-OL4 DAJTE3WK3P6-OL4 DAJTX3WK3P6-OL4 see page 222. 5000 pF DAJT3WK3P5-OL4 DAJTE3WK3P5-OL4 DAJTX3WK3P5-OL4 (cid:1) For P.C. hole patterns, see page 254. 47000 pF DAJT3WK3P9-OL4 DAJTE3WK3P9-OL4 DAJTX3WK3P9-OL4 (cid:1) For panel cutouts, see page 221. Note: For performance class 1add -A190. Example: DAJT3WK3P6-OL4-A190 (cid:1) For hardware views (European), For electrical data, see page 107. see page 227. Keyed Configuration Engaging Face Engaging Face A A C Ø 3,05 (.120) C Ø 3,05 (.120) 10° B 10° B A1 A3 A1 A3 E D E D Ø 2,60 (.102) 11,60 ± 0,20 (.457 ± .008) F L W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,25 (.010) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) Dimensions are shown in mm (inch) 126 Dimensions subject to change

D Subminiature Filter D D*JT Combo — High Power Straight Receptacle Part Numbers Filter Clinch Nut Clinch Nut Reader’s Resource Capacitance Through Hole #4-40 UNC M3 (cid:1) For contact cavity arrangements, 1000 pF DAJT3W3S1-OL4 DAJTE3W3S1-OL4 DAJTX3W3S1-OL4 see page 223. 1500 pF DAJT3W3S6-OL4 DAJTE3W3S6-OL4 DAJTX3W3S6-OL4 (cid:1) For P.C. hole patterns, see page 257. (cid:1) For panel cutouts, see page 221. 5000 pF DAJT3W3S5-OL4 DAJTE3W3S5-OL4 DAJTX3W3S5-OL4 (cid:1) For hardware views (European), 47000 pF DAJT3W3S9-OL4 DAJTE3W3S9-OL4 DAJTX3W3S9-OL4 see page 227. Note: For performance class 1add -A190. Example: DAJT3W3S6-OL4-A190 Part Numbers — Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3S1-OL4 DAJTE3WK3S1-OL4 DAJTX3WK3S1-OL4 1500 pF DAJT3WK3S6-OL4 DAJTE3WK3S6-OL4 DAJTX3WK3S6-OL4 5000 pF DAJT3WK3S5-OL4 DAJTE3WK3S5-OL4 DAJTX3WK3S5-OL4 47000 pF DAJT3WK3S9-OL4 DAJTE3WK3S9-OL4 DAJTX3WK3S9-OL4 Note: For performance class 1add -A190. Example: DAJT3WK3S-OL4-A190 For electrical data, see page 107. Engaging Face Keyed Configuration Engaging Face A A C C 10° B Ø 3,05 (.120) 10° B Ø 3,05 (.120) A3 A1 A3 A1 E D E D Ø 2,60 (.102) 11,70 ± 0,20 (.461 ± .008) F L W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 127

D Subminiature Filter D D*JT Combo — High Power Solder Cup Plug Part Numbers Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3W3P1 DAJTE3W3P1 DAJTX3W3P1 1500 pF DAJT3W3P6 DAJTE3W3P6 DAJTX3W3P6 5000 pF DAJT3W3P5 DAJTE3W3P5 DAJTX3W3P5 47000 pF DAJT3W3P9 DAJTE3W3P9 DAJTX3W3P9 Note: For performance class 1add -A190. Example: DAJT3W3P6-A190 Part Numbers – Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3P1 DAJTE3WK3P1 DAJTX3WK3P1 Reader’s Resource (cid:1) For contact cavity arrangements, 1500 pF DAJT3WK3P6 DAJTE3WK3P6 DAJTX3WK3P6 see page 222. 5000 pF DAJT3WK3P5 DAJTE3WK3P5 DAJTX3WK3P5 (cid:1) For panel cutouts, see page 221. 47000 pF DAJT3WK3P9 DAJTE3WK3P9 DAJTX3WK3P9 (cid:1) For hardware views (European), Note: For performance class 1add -A190. Example: DAJT3WK3P6-A190 see page 227. For electrical data, see page 107. Engaging Face Keyed Configuration Engaging Face A A C C Ø 3,05 Ø 3,05 10° B (.120) 10° B (.120) A1 A3 A1 A3 E D E D Ø 3,63 (.143) 15,80 ± 0,50 (.622 ± .011) F W L Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,25 (.010) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) Dimensions are shown in mm (inch) 128 Dimensions subject to change

D Subminiature Filter D D*JT Combo — High Power Solder Cup Receptacle Part Numbers Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3W3S1 DAJTE3W3S1 DAJTX3W3S1 1500 pF DAJT3W3S6 DAJTE3W3S6 DAJTX3W3S6 5000 pF DAJT3W3S5 DAJTE3W3S5 DAJTX3W3S5 47000 pF DAJT3W3S9 DAJTE3W3S9 DAJTX3W3S9 Note: For performance class 1add -A190. Example: DAJT3W3S6-A190 Part Numbers — Keyed Configuration Filter Clinch Nut Clinch Nut Capacitance Through Hole #4-40 UNC M3 1000 pF DAJT3WK3S1 DAJTE3WK3S1 DAJTX3WK3S1 1500 pF DAJT3WK3S6 DAJTE3WK3S6 DAJTX3WK3S6 Reader’s Resource 5000 pF DAJT3WK3S5 DAJTE3WK3S5 DAJTX3WK3S5 (cid:1) For contact cavity arrangements, 47000 pF DAJT3WK3S9 DAJTE3WK3S9 DAJTX3WK3S9 see page 223. Note: For performance class 1add -A190. Example: DAJT3WK3S6-A190 (cid:1) For panel cutouts, see page 221. For electrical data, see page 107. (cid:1) For hardware views (European), see page 227. Keyed Configuration Engaging Face Engaging Face A A C C 10° B 10° B Ø 3,05 (.120) Ø 3,05 (.120) A3 A1 A3 A1 E D E D Ø 3,63 (.143) 15,90 ± 0,50 (.626 ± .011) F L W Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 129

D Subminiature Military/High Reliability Selection Index Page Military/High Reliability An Introduction.......................................................130 Standard Layout 90°PC Tail with Plastic Bracket.........................................132 90°PC Tail.........................................................134 Straight PC Tail .....................................................136 Wrap Post Connector.................................................138 Solder Cup Connector ................................................140 24308-Style Cross Reference .............................................142 MIL-C-39028 Crimp Contacts............................................143 HE501/D*M Cross Reference............................................144 MIL-24308 Test Data ..................................................145 Combo DPCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option) Coaxial 90°(Sizes DE-DC).............................................146 Coaxial 90°(Size DD).................................................148 Coaxial Straight (Sizes DE-DC)..........................................150 Coaxial Straight (Size DD)..............................................152 Combo DPCB Connectors with High Power Contacts 40 A High Power 90°(Sizes DE-DC)......................................154 40 A High Power 90°(Size DD) .........................................156 40 A High Power Straight (Sizes DE-DC)...................................158 40 A High Power Straight (Size DD) ......................................160 Combo DPCB Connectors with High Voltage Contacts High Voltage Straight (Sizes DE-DC)......................................162 High Voltage Straight (Size DD)..........................................164 Combo DPCB Connectors with (Size 20) Signal Contacts Only Cable Solder Cup (Sizes DE-DD).........................................166 Dimensions are shown in mm (inch) 130 Dimensions subject to change

D Subminiature Military/High Reliability ITT Cannon Military/High Reliability D Subminiature connectors are used in many applications, including aerospace, transportation, communication systems, information systems and test equipment. Being the inventor of the D Subminiature connector, ITT Cannon is able to use its extensive design expertise and high quality manufacturing processes to insure the optimum performance and reliability. The D Subminiature connectors with fixed contacts in solder cup, straight and 90° PC contact terminations are designed to be comparable to MIL-C-24308 (see cross reference, pages 142-143). These high- reliability D Subminiature connectors are the finest quality connectors available at the most competitive prices in the market. Applications: (cid:1) Aerospace (cid:1) Transportation (cid:1) Communication Systems (cid:1) Information Systems (cid:1) Test Equipment Product Features (cid:1) Suitable for a variety of cable and printed (cid:1) Solder cup version accommodates wire size (cid:1) 5 A standard current rating circuit board options 20 AWG maximum (cid:1) Clinch Nut and Float Mount Options Specifications Temperature Rating −55°C to 125°C Coaxial VSWR Less than 1.30 +.03F for F up to 500 MHz Signal Contact Current Rating 7.5 A current capacity Coaxial Insertion Loss .3dB loss at 500 MHz Signal Contact Resistance 55 millivolt max. at 7.5 test current High Power Current Rating Up to 40 A Signal Contact High Power Dielectric Withstanding Voltage 1250 VAC at Sea Level Dielectric Withstanding Voltage 1000 VAC at Sea Level Coaxial Current Rating 5 A High Voltage Current Rating 5 A Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level High Voltage Contact Coaxial Impedance 75 (cid:1)or 50 (cid:1) Dielectric Withstanding Voltage 2800 V at Sea Level Materials and Finishes Description Material Finish/Treatment Shell Steel Yellow Chromate over Zinc (Cadmium available upon request; order code -A101) Insulator Polyester, UL 94V-0, Color: Green None Contacts (Military) Copper Alloy 50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance Contacts (Commercial) Copper Alloy Gold over Nickel on mating area, Tin on balance Dual Float Mount Hardware Stainless Steel Passivated Clinch Nut Hardware Stainless Steel with plastic insert Passivated Standoff Stainless Steel Passivated Plastic Bracket Thermoplastic, UL 94V-0 None Metal Bracket Steel Zinc (Tin if boardlocks are attached) Coaxial/High Power/High Voltage Contact Assemblies Contacts and Outer Shells Copper Alloy Gold over Nickel Ring, Retaining Copper Alloy Nickel Insulator (Coaxial Only) Teflon None Insulator (High Voltage Only) Thermoplastic None Dimensions are shown in mm (inch) Dimensions subject to change 131

D Subminiature Military/High Reliability 90°PC Tail with Plastic Bracket Plug Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEMM9PD DEMM9PL DEMM9PS DEMM9PA DEMM9PG DEMM9PW DA 15 DAMM15PD DAMM15PL DAMM15PS DAMM15PA DAMM15PG DAMM15PW DB 25 DBMM25PD DBMM25PL DBMM25PS DBMM25PA DBMM25PG DBMM25PW DC 37 DCMM37PD DCMM37PL DCMM37PS DCMM37PA DCMM37PG DCMM37PW DD 50 DDMM50PD DDMM50PL DDMM50PS DDMM50PA DDMM50PG DDMM50PW Reader’s Resource (cid:1) For contact cavity arrangements, Commercial Part Numbers see page 224. XY XY (cid:1) For P.C. hole patterns, see page 272. 0,76 (.030) 1,02 (.040) (cid:1) For panel cutouts, see page 221. Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEM9PD DEM9PL DEM9PS DEM9PA DEM9PG DEM9PW DA 15 DAM15PD DAM15PL DAM15PS DAM15PA DAM15PG DAM15PW DB 25 DBM25PD DBM25PL DBM25PS DBM25PA DBM25PG DBM25PW DC 37 DCM37PD DCM37PL DCM37PS DCM37PA DCM37PG DCM37PW DD 50 DDM50PD DDM50PL DDM50PS DDM50PA DDM50PG DDM50PW DD Configuration Engaging Face 2,84 A (.112) X ± 0,69 (.027) C 5,68 (.224) B E D 7,18 ± 0,25 (.283 ± .010) L 10° Ø Y Ø 3,05 (.120) 2,84 X ± 0,69 (.027) (.112) M N 7,18 ± 0,25 F (.283 ± .010) W Dimensions A B C D E F W W L M N Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) 12,30 (.484) 8,64 (.340) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) 12,30 (.484) 8,64 (.340) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) 0,99 (.039) 15,09 (.594) 10,04 (.395) Dimensions are shown in mm (inch) 132 Dimensions subject to change

D Subminiature Military/High Reliability 90°PC Tail with Plastic Bracket Receptacle Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEMM9SD DEMM9SL DEMM9SS DEMM9SA DEMM9SG DEMM9SW DA 15 DAMM15SD DAMM15SL DAMM15SS DAMM15SA DAMM15SG DAMM15SW DB 25 DBMM25SD DBMM25SL DBMM25SS DBMM25SA DBMM25SG DBMM25SW DC 37 DCMM37SD DCMM37SL DCMM37SS DCMM37SA DCMM37SG DCMM37SW DD 50 DDMM50SD DDMM50SL DDMM50SS DDMM50SA DDMM50SG DDMM50SW Reader’s Resource (cid:1) For contact cavity arrangements, Commercial Part Numbers see page 224. XY XY (cid:1) For P.C. hole patterns, see page 272. 0,76 (.030) 1,02 (.040) (cid:1) For panel cutouts, see page 221. Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEM9SD DEM9SL DEM9SS DEM9SA DEM9SG DEM9SW DA 15 DAM15SD DAM15SL DAM15SS DAM15SA DAM15SG DAM15SW DB 25 DBM25SD DBM25SL DBM25SS DBM25SA DBM25SG DBM25SW DC 37 DCM37SD DCM37SL DCM37SS DCM37SA DCM37SG DCM37SW DD 50 DDM50SD DDM50SL DDM50SS DDM50SA DDM50SG DDM50SW DD Configuration Engaging Face A X ± 0,69 (.027) 2,84 C (.112) B 5,68 (.224) E D 7,18 ± 0,25 (.283 ± .010) L 10° Ø Y Ø 3,05 (2.1,1824) X ± 0,69 (.027) (.120) M N 7,18 ± 0,25 F (.283 ± .010) W Dimensions A B C D E F W L M N Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 15,09 (.594) 10,04 (.395) Dimensions are shown in mm (inch) Dimensions subject to change 133

D Subminiature Military/High Reliability 90°PC Tail Plug Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) X X X X X Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) DE 9 DEMM9PF DEMM9PP DEMM9PR DEMM9PC DEMM9PK DA 15 DAMM15PF DAMM15PP DAMM15PR DAMM15PC DAMM15PK DB 25 DBMM25PF DBMM25PP DBMM25PR DBMM25PC DBMM25PK DC 37 DCMM37PF DCMM37PP DCMM37PR DCMM37PC DCMM37PK DD 50 DDMM50PF DDMM50PP DDMM50PR DDMM50PC DDMM50PK Reader’s Resource (cid:1) For contact cavity arrangements, Commercial Part Numbers see page 224. (cid:1) For P.C. hole patterns, see page 272. XY XY 0,76 (.030) 1,02 (.040) (cid:1) For panel cutouts, see page 221. X X X X X (cid:1) For hardware views (Standard), see page 226. Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) DE 9 DEM9PF DEM9PP DEM9PR DEM9PC DEM9PK DA 15 DAM15PF DAM15PP DAM15PR DAM15PC DAM15PK DB 25 DBM25PF DBM25PP DBM25PR DBM25PC DBM25PK DC 37 DCM37PF DCM37PP DCM37PR DCM37PC DCM37PK DD 50 DDM50PF DDM50PP DDM50PR DCM50PC DDM50PK Engaging Face DD Configuration 2,84 A (.112) X ± 0,69 (.027) C 5,68 (.224) B Ø 3,05 (.120) E D K 7,18 ± 0,25 (.283 ± .010) L 10° Ø Y 2,84 X ± 0,69 (.027) (.112) F 7,18 ± 0,25 W (.283 ± .010) Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 134 Dimensions subject to change

D Subminiature Military/High Reliability 90°PC Tail Receptacle Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) X X X X X Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) DE 9 DEMM9SF DEMM9SP DEMM9SR DEMM9SC DEMM9SK DA 15 DAMM15SF DAMM15SP DAMM15SR DAMM15SC DAMM15SK DB 25 DBMM25SF DBMM25SP DBMM25SR DBMM25SC DBMM25SK DC 37 DCMM37SF DCMM37SP DCMM37SR DCMM37SC DCMM37SK DD 50 DDMM50SF DDMM50SP DDMM50SR DDMM50SC DDMM50SK Commercial Part Numbers Reader’s Resource XY XY (cid:1) For contact cavity arrangements, 0,76 (.030) 1,02 (.040) see page 224. X X X X X (cid:1) For P.C. hole patterns, see page 272. Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) (cid:1) For panel cutouts, see page 221. DE 9 DEM9SF DEM9SP DEM9SR DEM9SC DEM9SK (cid:1) For hardware view (Standard), see page 226. DA 15 DAM15SF DAM15SP DAM15SR DAM15SC DAM15SK DB 25 DBM25SF DBM25SP DBM25SR DBM25SC DBM25SK DC 37 DCM37SF DCM37SP DCM37SR DCM37SC DCM37SK DD 50 DDM50SF DDM50SP DDM50SR DDM50SC DDM50SK DD Configuration Engaging Face A X ± 0,69 (.027) 2,84 C (.112) Ø 3,05 (.120) 5,68 B (.224) E D K 7,18 ± 0,25 (.283 ± .010) L 10° Ø Y 2,84 X ± 0,69 (.027) (.112) 7,18 ± 0,25 F (.283 ± .010) W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0.13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 135

D Subminiature Military/High Reliability Straight PC Tail Plug Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEMM9PE* DEMM9PM* DEMM9PZ* DEMM9PB DEMM9PH DEMM9PX* DA 15 DAMM15PE* DAMM15PM* DAMM15PZ* DAMM15PB DAMM15PH DAMM15PX* DB 25 DBMM25PE* DBMM25PM* DBMM25PZ* DBMM25PB DBMM25PH DBMM25PX* DC 37 DCMM37PE* DCMM37PM* DCMM37PZ* DCMM37PB DCMM37PH DCMM37PX* DD 50 DDMM50PE* DDMM50PM* DDMM50PZ* DDMM50PB DDMM50PH DDMM50PX* Note: Spacers (shipped loose) provided only on parts marked * Reader’s Resource Commercial Part Numbers (cid:1) For contact cavity arrangements, XY XY see page 224. 0,76 (.030) 1,02 (.040) (cid:1) For P.C. hole patterns, see page 274. Shell X X X X X X (cid:1) For panel cutouts, see page 221. Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) (cid:1) For hardware views (Standard), see page 226. DE 9 DEM9PE DEM9PM DEM9PZ DEM9PB DEM9PH DEM9PX DA 15 DAM15PE DAM15PM DAM15PZ DAM15PB DAM15PH DAM15PX DB 25 DBM25PE DBM25PM DBM25PZ DBM25PB DBM25PH DBM25PX DC 37 DCM37PE DCM37PM DCM37PZ DCM37PB DCM37PH DCM37PX DD 50 DDM50PE DDM50PM DDM50PZ DDM50PB DDM50PH DDM50PX Engaging Face DD Configuration A 5,69 (.224) C 2,84 B Ø 3,05 (.112) (.120) K E D L 10° SPACER (SHIPPED LOOSE) 6,86 FOR REFERENCE ONLY Ø Y X ± 0,69 (.027) (.270) Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (0.39) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 136 Dimensions subject to change

D Subminiature Military/High Reliability Straight PC Tail Receptacle Part Numbers Military Part Numbers XY XY 0,76 (.030) 1,02 (.040) Shell X X X X X X Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEMM9SE* DEMM9SM* DEMM9SZ* DEMM9SB DEMM9SH DEMM9SX* DA 15 DAMM15SE* DAMM15SM* DAMM15SZ* DAMM15SB DAMM15SH DAMM15SX* DB 25 DBMM25SE* DBMM25SM* DBMM25SZ* DBMM25SB DBMM25SH DBMM25SX* DC 37 DCMM37SE* DCMM37SM* DCMM37SZ* DCMM37SB DCMM37SH DCMM37SX* DD 50 DDMM50SE* DDMM50SM* DDMM50SZ* DDMM50SB DDMM50SH DDMM50SX* Note: Spacers (shipped loose) provided only on parts marked * Reader’s Resource (cid:1) For contact cavity arrangements, Commercial Part Numbers see page 224. XY XY (cid:1) For P.C. hole patterns, see page 274. 0,76 (.030) 1,02 (.040) (cid:1) For panel cutouts, see page 221. Shell X X X X X X (cid:1) For hardware views (Standard), see page 226. Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183) DE 9 DEM9SE DEM9SM DEM9SZ DEM9SB DEM9SH DEM9SX DA 15 DAM15SE DAM15SM DAM15SZ DAM15SB DAM15SH DAM15SX DB 25 DBM25SE DBM25SM DBM25SZ DBM25SB DBM25SH DBM25SX DC 37 DCM37SE DCM37SM DCM37SZ DCM37SB DCM37SH DCM37SX DD 50 DDM50SE DDM50SM DDM50SZ DDM50SB DDM50SH DDM50SX DD Configuration Engaging Face 5,69 (.224) 2,84 A (.112) C Ø 3,05 B (.120) K E D L 10° SPACER (SHIPPED LOOSE) Ø Y (2.1,1824) FOR REFERENCE ONLY X ± 0,69 (.027) 6,86 (.270) F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 137

D Subminiature Military/High Reliability Wrap Post Connector Plug Part Numbers Shell Size Layout Military Part Numbers DE 9 DEMM9PF179 DEMM9PF179A DA 15 DAMM15PF179 DAMM15PF179A DB 25 DBMM25PF179 DBMM25PF179A DC 37 DCMM37PF179 DCMM37PF179A DD 50 DDMM50PF179 DDMM50PF179A Shell Size Layout Commercial Part Numbers DE 9 DEM9PF179 DEM9PF179A DA 15 DAM15PF179 DAM15PF179A Reader’s Resource DB 25 DBM25PF179 DBM25PF179A (cid:1) For contact cavity arrangements, DC 37 DCM37PF179 DCM37PF179A see page 224. (cid:1) For P.C. hole patterns, see page 274. DD 50 DDM50PF179 DDM50PF179A (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Number of X Modification Code Wraps ±0,51 (.020) F179 2 9,60 (.378) F179A 3 12,90 (.508) DD Configuration 5,69 (.224) Engaging Face 2,84 (.112) A C Ø 3,05 B (.120) K E D L 10° 2,84 0,61 (.024) (.112) X 5,99 ± 0,38 F (.236 ± .015) W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 138 Dimensions subject to change

D Subminiature Military/High Reliability Wrap Post Connector Receptacle Part Numbers Shell Size Layout Military Part Numbers DE 9 DEMM9SF179 DEMM9SF179A DA 15 DAMM15SF179 DAMM15SF179A DB 25 DBMM25SF179 DBMM25SF179A DC 37 DCMM37SF179 DCMM37SF179A DD 50 DDMM50SF179 DDMM50SF179A Shell Size Layout Commercial Part Numbers DE 9 DEM9SF179 DEM9SF179A Reader’s Resource (cid:1) For contact cavity arrangements, DA 15 DAM15SF179 DAM15SF179A DB 25 DBM25SF179 DBM25SF179A see page 224. (cid:1) For P.C. hole patterns, see page 274. DC 37 DCM37SF179 DCM37SF179A (cid:1) For panel cutouts, see page 221. DD 50 DDM50SF179 DDM50SF179A (cid:1) For hardware views (Standard), see page 226. Modification Number of X Code Wraps ±0,51 (.020) F179 2 9,60 (.378) F179A 3 12,90 (.508) DD Configuration 5,69 (.224) 2,84 Engaging Face (.112) A C B Ø 3,05 (.120) K E D L 10° 2,84 0,61 (.024) (.112) X F 5,99 ± 0,38 W (.236 ± .015) Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 139

D Subminiature Military/High Reliability Solder Cup Connector Plug Part Numbers Military Part Numbers Shell Dual Clinch Nut Size Layout Through Hole Float Mount #4-40 UNC DE 9 DEMM9P DEMMY9P DEMME9P DA 15 DAMM15P DAMMY15P DAMME15P DB 25 DBMM25P DBMMY25P DBMME25P DC 37 DCMM37P DCMMY37P DCMME37P DD 50 DDMM50P DDMMY50P DDMME50P Commercial Part Numbers Shell Dual Clinch Nut Reader’s Resource Size Layout Through Hole Float Mount #4-40 UNC (cid:1) For contact cavity arrangements, DE 9 DEM9P DEMY9P DEME9P see page 224. DA 15 DAM15P DAMY15P DAME15P (cid:1) For panel cutouts, see page 221. DB 25 DBM25P DBMY25P DBME25P (cid:1) For hardware views (Standard), see page 226. DC 37 DCM37P DCMY37P DCME37P DD 50 DDM50P DDMY50P DDME50P Engaging Face DD Configuration 5,69 A (.224) C 2,84 B Ø 3,05 (.112) (.120) K E D L 10° 2,84 10,72 (.422) (.112) MAX F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0.76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 140 Dimensions subject to change

D Subminiature Military/High Reliability Solder Cup Connector Receptacle Part Numbers Military Part Numbers Shell Dual Clinch Nut Size Layout Through Hole Float Mount #4-40 UNC DE 9 DEMM9S DEMMY9S DEMME9S DA 15 DAMM15S DAMMY15S DAMME15S DB 25 DBMM25S DBMMY25S DBMME25S DC 37 DCMM37S DCMMY37S DCMME37S DD 50 DDMM50S DDMMY50S DDMME50S Commercial Part Numbers Shell Dual Clinch Nut Reader’s Resource Size Layout Through Hole Float Mount #4-40 UNC (cid:1) For contact cavity arrangements, DE 9 DEM9S DEMY9S DEME9S see page 224. DA 15 DAM15S DAMY15S DAME15S (cid:1) For panel cutouts, see page 221. DB 25 DBM25S DBMY25S DBME25S (cid:1) For hardware views (Standard), see page 226. DC 37 DCM37S DCMY37S DCME37S DD 50 DDM50S DDMY50S DDME50S Engaging Face DD Configuration A 5,69 (.224) C 2,84 Ø 3,05 (.112) B (.120) K E D L 10° 2,84 (.112) 9,91 (.390) MAX F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 141

D Subminiature Military/High Reliability 24308-Style Cross Reference Military ITT Cannon Military ITT Cannon Military ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number M24308/1-1 DEMM9S M24308/3-3 DBMM25P M24308/6-261 DBMAMF25SNM M24308/1-2 DAMM15S M24308/3-4 DCMM37P M24308/6-262 DCMAMF37SNM M24308/1-3 DBMM25S M24308/3-5 DDMM50P M24308/6-263 DDMAMF50SNM M24308/1-4 DCMM37S M24308/3-12 DEMMF9P M24308/6-270 DEMAMFT9SNM M24308/1-5 DDMM50S M24308/3-13 DAMMF15P M24308/6-271 DAMAMFT15SNM M24308/1-12 DEMMF9S M24308/3-14 DBMMF25P M24308/6-272 DBMAMFT25SNM M24308/1-13 DAMMF15S M24308/3-15 DCMMF37P M24308/6-273 DCMAMFT37SNM M24308/1-14 DBMMF25S M24308/3-16 DDMMF50P M24308/6-274 DDMAMFT50SNM M24308/1-15 DCMMF37S M24308/4-1 DEMAM9P M24308/6-281 DEMAM9SNM-FO M24308/1-16 DDMMF50S M24308/4-2 DAMAM15P M24308/6-282 DAMAM15SNM-FO M24308/1-23 DEMMY9S M24308/4-3 DBMAM25P M24308/6-283 DBMAM25SNM-FO M24308/1-24 DAMMY15S M24308/4-4 DCMAM37P M24308/6-284 DCMAM37SNM-FO M24308/1-25 DBMMY25S M24308/4-5 DDMAM50P M24308/6-285 DDMAM50SNM-FO M24308/1-26 DCMMY37S M24308/4-6 DEMAMT9P M24308/6-324 DEMAMF9SNM-FO M24308/1-27 DDMMY50S M24308/4-7 DAMAMT15P M24308/6-325 DAMAMF15SNM-FO M24308/2-1 DEMAM9S M24308/4-8 DBMAMT25P M24308/6-326 DBMAMF25SNM-FO M24308/2-2 DAMAM15S M24308/4-9 DCMAMT37P M24308/6-327 DCMAMF37SNM-FO M24308/2-3 DBMAM25S M24308/4-10 DDMAMT50P M24308/6-328 DDMAMF50SNM-FO M24308/2-4 DCMAM37S M24308/4-259 DEMAM9P-FO M24308/6-453 DEMAMY9SNM M24308/2-5 DDMAM50S M24308/4-260 DAMAM15P-FO M24308/6-454 DAMAMY15SNM M24308/2-6 DEMAMT9S M24308/4-261 DBMAMF25P-FO M24308/6-455 DBMAMY25SNM M24308/2-7 DAMAMT15S M24308/4-262 DCMAM37P-FO M24308/6-456 DCMAMY37SNM M24308/2-8 DBMAMT25S M24308/4-263 DDMAM50P-FO M24308/6-457 DDMAMY50SNM M24308/2-9 DCMAMT37S M24308/4-302 DEMAMF9P M24308/6-464 DDMEMYT9SNM M24308/2-10 DDMAMT50S M24308/4-303 DAMAMF15P M24308/6-465 DAMAMYT15SNM M24308/2-23 DEMAMF9S M24308/4-304 DBMAMF25P M24308/6-466 DBMAMYT25SNM M24308/2-24 DAMAMF15S M24308/4-305 DCMAMF37P M24308/6-467 DCMAMYT37SNM M24308/2-25 DBMAMF25S M24308/4-306 DDMAMF50P M24308/6-468 DDMAMYT50SNM M24308/2-26 DCMAMF37S M24308/4-313 DEMAMFT9P M24308/6-491 DEMAMY9SNM-FO M24308/2-27 DDMAMF50S M24308/4-314 DAMAMFT15P M24308/6-492 DAMAMY15SNM-FO M24308/2-34 DEMAMFT9S M24308/4-315 DBMAMFT25P M24308/6-493 DBMAMY25SNM-FO M24308/2-35 DAMAMFT15S M24308/4-316 DCMAMFT37P M24308/6-494 DCMAMY37SNM-FO M24308/2-36 DBMAMFT25S M24308/4-317 DDMAMFT50P M24308/6-495 DDMAMY50SNM-FO M24308/2-37 DCMAMFT37S M24308/4-324 DEMAMF9P-FO M24308/7-1 DEMM9PNM M24308/2-38 DDMAMFT50S M24308/4-325 DAMAMF15P-FO M24308/7-2 DAMM15PNM M24308/2-281 DEMAM9S-FO M24308/4-326 DBMAMF25P-FO M24308/7-3 DBMM25PNM M24308/2-282 DAMAM15S-FO M24308/4-327 DCMAMF37P-FO M24308/7-4 DCMM37PNM M24308/2-283 DBMAM25S-FO M24308/4-328 DDMAMF50P-FO M24308/7-5 DDMM50PNM M24308/2-284 DCMAM37S-FO M24308/5-1 DEMM9SNM M24308/7-12 DEMMF9PNM M24308/2-285 DDMAM50S-FO M24308/5-2 DAMM15SNM M24308/7-13 DAMMF15PNM M24308/2-292 DEMAMF9S-FO M24308/5-3 DBMM25SNM M24308/7-14 DBMMF25PNM M24308/2-293 DAMAMF15S-FO M24308/5-4 DCMM37SNM M24308/7-15 DCMMF37PNM M24308/2-294 DBMAMF25S-FO M24308/5-5 DDMM50SNM M24308/7-16 DDMMF50PNM M24308/2-295 DCMAMF37S-FO M24308/5-12 DEMMF9SNM M24308/8-1 DEMAM9PNM M24308/2-296 DDMAMF50S-FO M24308/5-13 DAMMF15SNM M24308/8-2 DAMAM15PNM M24308/2-335 DBMAMR25S M24308/5-14 DBMMF25SNM M24308/8-3 DBMAM25PNM M24308/2-336 DCMAMR37S M24308/5-15 DCMMF37SNM M24308/8-4 DCMAM37PNM M24308/2-341 DAMAMR15S M24308/5-16 DDMMF50SNM M24308/8-5 DDMAM50PNM M24308/2-342 DEMAMY9S M24308/5-23 DDMMY9SNM M24308/8-6 DEMAMT9PNM M24308/2-343 DAMAMY15S M24308/5-24 DAMMY15SNM M24308/8-7 DAMAMT15PNM M24308/2-344 DBMAMY25S M24308/5-25 DBMMY25SNM M24308/8-8 DBMAMT25PNM M24308/2-345 DCMAMY37S M24308/5-26 DCMMY37SNM M24308/8-9 DCMAMT37PNM M24308/2-346 DDMAMY50S M24308/5-27 DDMMY50SNM M24308/8-10 DDMAMT50PNM M24308/2-353 DEMAMYT9S M24308/6-1 DEMAM9SNM M24308/8-259 DEMAM9PNM-FO M24308/2-354 DAMAMYT15S M24308/6-2 DAMAM15SNM M24308/8-260 DAMAM15PNM-FO M24308/2-355 DBMAMYT25S M24308/6-3 DBMAM25SNM M24308/8-261 DBMAM25PNM-FO M24308/2-356 DCMAMYT37S M24308/6-4 DCMAM37SNM M24308/8-262 DCMAM37PNM-FO M24308/2-357 DDMAMYT50S M24308/6-5 DDMAM50SNM M24308/8-263 DDMAM50PNM-FO M24308/2-482 DEMAMY9S-FO M24308/6-6 DEMAMT9SNM M24308/8-302 DEMAMF9PNM M24308/2-483 DEMAMY15S-FO M24308/6-7 DAMAMT15SNM M24308/8-303 DAMAMF15PNM M24308/2-484 DEMAMY25S-FO M24308/6-8 DBMAMT25SNM M24308/8-304 DBMAMF25PNM M24308/2-485 DCMAMY37S-FO M24308/6-9 DCMAMT37SNM M24308/8-305 DCMAMF37PNM M24308/2-486 DDMAMY50S-FO M24308/6-10 DDMAMT50SNM M24308/8-306 DDMAMF50PNM M24308/3-1 DEMM9P M24308/6-259 DEMAMF9SNM M24308/8-313 DEMAMFT9PNM M24308/3-2 DAMM15P M24308/6-260 DAMAMF15SNM M24308/8-314 DAMAMFT15PNM Dimensions are shown in mm (inch) 142 Dimensions subject to change

D Subminiature Military/High Reliability 24308-Style Cross Reference Military ITT Cannon Military ITT Cannon Military ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number M24308/8-315 DBMAMFT25PNM M24308/23-21 DBMM25SX M24308/24-15 DBMM25PH M24308/8-316 DCMAMFT37PNM M24308/23-22 DCMM37SX M24308/24-16 DCMM37PH M24308/8-317 DDMAMFT50PNM M24308/23-23 DDMM50SX M24308/24-17 DDMM50PH M24308/8-324 DEMAMF9PNM-FO M24308/23-25 DEMM9SD M24308/24-19 DEMM9PX M24308/8-325 DAMAMF15PNM-FO M24308/23-26 DAMM15SD M24308/24-20 DAMM15PX M24308/8-326 DBMAMF25PNM-FO M24308/23-27 DBMM25SD M24308/24-21 DBMM25PX M24308/8-327 DCMAMF37PNM-FO M24308/23-28 DCMM37SD M24308/24-22 DCMM37PX M24308/8-328 DDMAMF50PNM-FO M24308/23-29 DDMM50SD M24308/24-23 DDMM50PX M24308/9-1 DEH9P002 M24308/23-31 DEMM9SL M24308/24-25 DEMM9PD M24308/9-2 DAH15P002 M24308/23-32 DAMM15SL M24308/24-26 DAMM15PD M24308/9-3 DBH25P002 M24308/23-33 DBMM25SL M24308/24-27 DBMM25PD M24308/9-4 DCH37P002 M24308/23-34 DCMM37SL M24308/24-28 DCMM37PD M24308/9-5 DDH50P002 M24308/23-35 DDMM50SL M24308/24-29 DDMM50PD M24308/9-6 DEH9P001 M24308/23-37 DEMM9SA M24308/24-31 DEMM9PL M24308/9-7 DAH15P001 M24308/23-38 DAMM15SA M24308/24-32 DAMM15PL M24308/9-8 DBH25P001 M24308/23-39 DBMM25SA M24308/24-33 DBMM25PL M24308/9-9 DCH37P001 M24308/23-40 DCMM37SA M24308/24-34 DCMM37PL M24308/9-10 DDH50P001 M24308/23-41 DDMM50SA M24308/24-35 DDMM50PL M24308/9-11 DEH9P202 M24308/23-43 DEMM9SG M24308/24-37 DEMM9PA M24308/9-12 DAH15P202 M24308/23-44 DAMM15SG M24308/24-38 DAMM15PA M24308/9-13 DBH25P202 M24308/23-45 DBMM25SG M24308/24-39 DBMM25PA M24308/9-14 DCH37P202 M24308/23-46 DCMM37SG M24308/24-40 DCMM37PA M24308/9-15 DDH50P202 M24308/23-47 DDMM50SG M24308/24-41 DDMM50PA M24308/9-16 DEH9P201 M24308/23-49 DEMM9SS M24308/24-43 DEMM9PG M24308/9-17 DAH15P201 M24308/23-50 DAMM15SS M24308/24-44 DAMM15PG M24308/9-18 DBH25P201 M24308/23-51 DBMM25SS M24308/24-45 DBMM25PG M24308/9-19 DCH37P201 M24308/23-52 DCMM37SS M24308/24-46 DCMM37PG M24308/9-20 DDH50P201 M24308/23-53 DDMM50SS M24308/24-47 DDMM50PG M24308/23-1 DEMM9SM M24308/23-55 DEMM9SW M24308/24-49 DEMM9PS M24308/23-2 DAMM15SM M24308/23-56 DAMM15SW M24308/24-50 DAMM15PS M24308/23-3 DBMM25SM M24308/23-57 DBMM25SW M24308/24-51 DBMM25PS M24308/23-4 DCMM37SM M24308/23-58 DCMM37SW M24308/24-52 DCMM37PS M24308/23-5 DDMM50SM M24308/23-59 DDMM50SW M24308/24-53 DDMM50PS M24308/23-7 DEMM9SZ M24308/24-1 DEMM9PM M24308/24-55 DEMM9PW M24308/23-8 DAMM15SZ M24308/24-2 DAMM15PM M24308/24-56 DAMM15PW M24308/23-9 DBMM25SZ M24308/24-3 DBMM25PM M24308/24-57 DBMM25PW M24308/23-10 DCMM37SZ M24308/24-4 DCMM37PM M24308/24-58 DCMM37PW M24308/23-11 DDMM50SZ M24308/24-5 DDMM50PM M24308/24-59 DDMM50PW M24308/23-13 DEMM9SH M24308/24-7 DEMM9PZ M24308/26-1 D20418-2 M24308/23-14 DAMM15SH M24308/24-8 DAMM15PZ M24308/26-2 D20418-39 M24308/23-15 DBMM25SH M24308/24-9 DBMM25PZ M24308/23-16 DCMM37SH M24308/24-10 DCMM37PZ M24308/23-17 DDMM50SH M24308/24-11 DDMM50PZ M24308/23-19 DEMM9SX M24308/24-13 DEMM9PH M24308/23-20 DAMM15SX M24308/24-14 DAMM15PH MIL-C-39029 Crimp Contacts Military ITT Cannon Part Number Part Number Contact Size Contact Style Product Line MIL Specification M39029/63-368 031-1007-078 20 Socket D*MA 24308-Style M39029/64-369 330-5291-097 20 Pin D*MA 24308-Style Dimensions are shown in mm (inch) Dimensions subject to change 143

D Subminiature Military/High Reliability HE501/D*M Cross Reference HE501 ITT Cannon HE501 ITT Cannon HE501 ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number HE501N09AS3 DEM9S HE501N9KS33 DEM9SF179A HE501N09YP4 DEM9POL3 HE501N15AS3 DAM15S HE501N15KS33 DAM15SF179A HE501N15YP4 DAM15POL3 HE501N25AS3 DBM25S HE501N25KS33 DBM25SF179A HE501N25YP4 DBM25POL3 HE501N37AS3 DCM37S HE501N37KS33 DCM37SF179A HE501N37YP4 DCM37POL3 HE501N50AS3 DDM50S HE501N50KS33 DDM50SF179A HE501N50YP4 DDM50POL3 HE501F09AS3 DEMY9S HE501N09AP DEM9P HE501P09VP6E DEM9P1A5N HE501F15AS3 DAMY15S HE501N15AP DAM15P HE501P15VP6E DAM15P1A5N HE501F25AS3 DBMY25S HE501N25AP DBM25P HE501P25VP6E DBM25P1A5N HE501F37AS3 DCMY37S HE501N37AP DCM37P HE501P37VP6E DCM39P1A5N HE501F50AS3 DDMY50S HE501N50AP DDM50P HE501P50VP6E DDM50P1A5N HE501N09YS43 DEM9SOL3 HE501F09AP DEMY9P HE501N9KP3 DEM9PF179A HE501N15YS43 DAM15SOL3 HE501F15AP DAMY15P HE501N15KP3 DAM15PF179A HE501N25YS43 DBM25SOL3 HE501F25AP DBMY25P HE501N25KP3 DBM25PF179A HE501N37YS43 DCM37SOL3 HE501F37AP DCMY37P HE501N37KP3 DCM37PF179A HE501N50YS43 DDM50SOL3 HE501F50AP DDMY50P HE501N50KP3 DDM50PF179A HE501P09VS63E DEM9S1A5N HE501P15VS63E DAM15SA15N HE501P25VS63E DBM25S1A5N HE501P37VS63E DCM37S1A5N HE501P50VS63E DDM50S1A5N Dimensions are shown in mm (inch) 144 Dimensions subject to change

None

D Subminiature Military/High Reliability Coaxial 90°PCB (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMMP5C1PJ DEMMC5C1PJ DEMMD5C1PJ DEMMG5C1PJ DA 7W2 DAMMP7C2PJ DAMMC7C2PJ DAMMD7C2PJ DAMMG7C2PJ DA 11W1 DAMMP11C1PJ DAMMC11C1PJ DAMMD11C1PJ DAMMG11C1PJ DA 3W3 DAMMP3C3PJ DAMMC3C3PJ DAMMD3C3PJ DAMMG3C3PJ DA 3WK3(cid:2) DAMMP3CK3PJTM DAMMC3CK3PJTM DAMMD3CK3PJTM DAMMG3CK3PJTM DB 5W5 DBMMP5C5PJ DBMMC5C5PJ DBMMD5C5PJ DBMMG5C5PJ DB 9W4 DBMMP9C4PJ DBMMC9C4PJ DBMMD9C4PJ DBMMG9C4PJ DB 13W3 DBMMP13C3PJ DBMMC13C3PJ DBMMD13C3PJ DBMMG13C3PJ Reader’s Resource DB 17W2 DBMMP17C2PJ DBMMC17C2PJ DBMMD17C2PJ DBMMG17C2PJ (cid:1) For contact cavity arrangements, DB 21W1 DBMMP21C1PJ DBMMC21C1PJ DBMMD21C1PJ DBMMG21C1PJ see page 222. (cid:1) For P.C. hole patterns, see pages 228-229. DC 8W8 DCMMP8C8PJ DCMMC8C8PJ DCMMD8C8PJ DCMMG8C8PJ (cid:1) For panel cutouts, see page 221. DC 13W6 DCMMP13C6PJ DCMMC13C6PJ DCMMD13C6PJ DCMMG13C6PJ (cid:1) For hardware views (Standard), see page 226. DC 17W5 DCMMP17C5PJ DCMMC17C5PJ DCMMD17C5PJ DCMMG17C5PJ (cid:1) For alternate bracket configuration (when DC 21WA4 DCMMP21CA4PJ DCMMC21CA4PJ DCMMD21CA4PJ DCMMG21CA4PJ connectors are supplied without boardlocks), DC 25W3 DCMMP25C3PJ DCMMC25C3PJ DCMMD25C3PJ DCMMG25C3PJ see page 226. DC 27W2 DCMMP27C2PJ DCMMC27C2PJ DCMMD27C2PJ DCMMG27C2PJ (cid:1) For alternate 50 Ohm coaxial configuration, Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1PJ see page 225. For DD shell size, see page 148. (cid:2)Keyed Engaging Face 0,56 (.023) A Ø 0,51 (.020) 3,89 (.153) C MIN 2,54 B (.100) 11,94 ± 0,33 (.470 ± .013) E D L BOARDLOCK 2,92 10° (.115) Screw lock, boardlock, and signal contacts Ø 0,76 0,82 (.030) (.032) removed for clarity 4,33 ± 0,38 2,84 (.170 ± .015) BRACKET, (.112) METAL 12,34 (.486) 8,64 RIVNUT 7,18 ± 0,25 (.340) #4-40 UNC (.283 ± .010) F W (6.2,5506 ±± 0.0,2150) SC#R4-E4W0 U LNOCCK Screw lock, boardlock, and coaxial contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 146 Dimensions subject to change

D Subminiature Military/High Reliability Coaxial 90°PCB (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMMP5C1SJ DEMMC5C1SJ DEMMD5C1SJ DEMMG5C1SJ DA 7W2 DAMMP7C2SJ DAMMC7C2SJ DAMMD7C2SJ DAMMG7C2SJ DA 11W1 DAMMP11C1SJ DAMMC11C1SJ DAMMD11C1SJ DAMMG11C1SJ DA 3W3 DAMMP3C3SJ DAMMC3C3SJ DAMMD3C3SJ DAMMG3C3SJ DA 3WK3(cid:2) DAMMP3CK3SJTM DAMMC3CK3SJTM DAMMD3CK3SJTM DAMMG3CK3SJTM DB 5W5 DBMMP5C5SJ DBMMC5C5SJ DBMMD5C5SJ DBMMG5C5SJ Reader’s Resource DB 9W4 DBMMP9C4SJ DBMMC9C4SJ DBMMD9C4SJ DBMMG9C4SJ (cid:1) For contact cavity arrangements, DB 13W3 DBMMP13C3SJ DBMMC13C3SJ DBMMD13C3SJ DBMMG13C3SJ see page 223. DB 17W2 DBMMP17C2SJ DBMMC17C2SJ DBMMD17C2SJ DBMMG17C2SJ (cid:1) For P.C. hole patterns, see pages 231-232. (cid:1) For panel cutouts, see page 221. DB 21W1 DBMMP21C1SJ DBMMC21C1SJ DBMMD21C1SJ DBMMG21C1SJ (cid:1) For hardware views (Standard), see page 226. DC 8W8 DCMMP8C8SJ DCMMC8C8SJ DCMMD8C8SJ DCMMG8C8SJ (cid:1) For alternate bracket configuration (when DC 13W6 DCMMP13C6SJ DCMMC13C6SJ DCMMD13C6SJ DCMMG13C6SJ connectors are supplied without boardlocks), DC 17W5 DCMMP17C5SJ DCMMC17C5SJ DCMMD17C5SJ DCMMG17C5SJ see page 226. DC 21WA4 DCMMP21CA4SJ DCMMC21CA4SJ DCMMD21CA4SJ DCMMG21CA4SJ (cid:1) For alternate 50 Ohm coaxial configuration, DC 25W3 DCMMP25C3SJ DCMMC25C3SJ DCMMD25C3SJ DCMMG25C3SJ see page 225. DC 27W2 DCMMP27C2SJ DCMMC27C2SJ DCMMD27C2SJ DCMMG27C2SJ Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1SJ For DD shell size, see page 149. (cid:2)Keyed Engaging Face 0,56 (.023) A Ø 0,51 3,89 (.153) C (.020) MIN 2,54 B (.100) 11,94 ± 0,33 (.470 ± .013) E D L 2,92 10° (.115) BOARDLOCK Ø 0,76 0,79 (.030) (.031) Screw lock, boardlock and signal contacts removed for clarity 2,84 4,33 ± 0,38 (.112) (.170 ± .015) BRACKET, METAL 12,34 (.486) 8,64 #4R-I4V0N UUNTC 7,18 ± 0,25 (.340) (.283 ± .010) F W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock and coaxial contact removed for clarity Note: (cid:3)Dimension varies with altenate bracket configuration, see Reader’s Resource page 225. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47.04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 147

D Subminiature Military/High Reliability Coaxial 90°PCB (Size DD) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMMP24C7PJ DDMMC24C7PJ DDMMD24C7PJ DDMMG24C7PJ DD 36W4 DDMMP36C4PJ DDMMC36C4PJ DDMMD36C4PJ DDMMG36C4PJ DD 43W2 DDMMP43C2PJ DDMMC43C2PJ DDMMD43C2PJ DDMMG43C2PJ DD 47W1 DDMMP47C1PJ DDMMC47C1PJ DDMMD47C1PJ DDMMG47C1PJ Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMP24X7PJ Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 230. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK 6,50 ± 0,25 #4-40 UNC (.256 ± .010) W F 11,53 ± 0,25 10,06 (.454 ± .010) (.396) 13,74 RIVNUT (.541) #4-40 UNC 5,68 (.224) BRACKET, METAL 4,33 ± 0,38 2,84 (.170 ± .015) (.112) Engaging Face Screw lock, boardlock, and coaxial contact removed for clarity 10° L E D 11,94 ± 0,33 (.470 ± .013) 2,54 (.100) 2,92 Ø 0,51 BOARDLOCK (0.0,8322) Ø(. 003,706) (.115) (.020) 3,89 (.153) B 0,56 MIN (.023) C A Screw lock, boardlock, and signal contacts removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 148 Dimensions subject to change

D Subminiature Military/High Reliability Coaxial 90°PCB (Size DD) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMMP24C7SJ DDMMC24C7SJ DDMMD24C7SJ DDMMG24C7SJ DD 36W4 DDMMP36C4SJ DDMMC36C4SJ DDMMD36C4SJ DDMMG36C4SJ DD 43W2 DDMMP43C2SJ DDMMC43C2SJ DDMMD43C2SJ DDMMG43C2SJ DD 47W1 DDMMP47C1SJ DDMMC47C1SJ DDMMD47C1SJ DDMMG47C1SJ Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMG36X4SJ Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 233. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK 6,50 ± 0,25 #4-40 UNC (.256 ± .010) W F 11,53 ± 0,25 10,06 (.454 ± .010) (.396) 13,74 (.541) RIVNUT 5,68 #4-40 UNC (.224) BRACKET, 4,33 ± 0,38 METAL 2,84 (.112) (.170 ± .015) Screw lock, boardlock, and coaxial contacts removed for clarity Engaging Face 10° L D 2,54 11,94 ± 0,33 E (.100) (.470 ± .013) 2,92 0,82 Ø 0,76 BOARDLOCK Ø 0,51 3,89 (.153) (.115) (.032) (.030) (.020) MIN B 0,56 (.023) C A Screw lock, boardlock, and signal contacts removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 149

D Subminiature Military/High Reliability Coaxial Straight PCB (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5C1PN DEMMZ5C1PN DEMMN5C1PN DA 7W2 DAMMV7C2PN DAMMZ7C2PN DAMMN7C2PN DA 11W1 DAMMV11C1PN DAMMZ11C1PN DAMMN11C1PN DA 3W3 DAMMV3C3PN DAMMZ3C3PN DAMMN3C3PN DA 3WK3(cid:2) DAMMV3CK3PNTM DAMMZ3CK3PNTM DAMMN3CK3PNTM DB 5W5 DBMMV5C5PN DBMMZ5C5PN DBMMN5C5PN DB 9W4 DBMMV9C4PN DBMMZ9C4PN DBMMN9C4PN Reader’s Resource DB 13W3 DBMMV13C3PN DBMMZ13C3PN DBMMN13C3PN (cid:1) For contact cavity arrangements, DB 17W2 DBMMV17C2PN DBMMZ17C2PN DBMMN17C2PN see page 222. DB 21W1 DBMMV21C1PN DBMMZ21C1PN DBMMN21C1PN (cid:1) For P.C. hole patterns, see pages 238-239. (cid:1) For panel cutouts, see page 221. DC 8W8 DCMMV8C8PN DCMMZ8C8PN DCMMN8C8PN (cid:1) For hardware views (Standard), see page 226. DC 13W6 DCMMV13C6PN DCMMZ13C6PN DCMMN13C6PN (cid:1) For alternate 50 Ohm coaxial configuration, DC 17W5 DCMMV17C5PN DCMMZ17C5PN DCMMN17C5PN see page 225. DC 21WA4 DCMMV21CA4PN DCMMZ21CA4PN DCMMN21CA4PN DC 25W3 DCMMV25C3PN DCMMZ25C3PN DCMMN25C3PN DC 27W2 DCMMV27C2PN DCMMZ27C2PN DCMMN27C2PN Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1PN For DD shell size, see page 152. (cid:2)Keyed Engaging Face Ø 0,51 A 2,54 (.020) C (.100) 0,62 (.024) B E D L 10° Screw lock, boardlock, and signal contacts removed for clarity Ø 0,76 BOARDLOCK (.030) 0,82 3,45 (.136) (.032) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and coaxial contact #4-40 UNC removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 150 Dimensions subject to change

D Subminiature Military/High Reliability Coaxial Straight PCB (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5C1SN DEMMZ5C1SN DEMMN5C1SN DA 7W2 DAMMV7C2SN DAMMZ7C2SN DAMMN7C2SN DA 11W1 DAMMV11C1SN DAMMZ11C1SN DAMMN11C1SN DA 3W3 DAMMV3C3SN DAMMZ3C3SN DAMMN3C3SN DA 3WK3(cid:2) DAMMV3CK3SNTM DAMMZ3CK3SNTM DAMMN3CK3SNTM DB 5W5 DBMMV5C5SN DBMMZ5C5SN DBMMN5C5SN DB 9W4 DBMMV9C4SN DBMMZ9C4SN DBMMN9C4SN DB 13W3 DBMMV13C3SN DBMMZ13C3SN DBMMN13C3SN Reader’s Resource DB 17W2 DBMMV17C2SN DBMMZ17C2SN DBMMN17C2SN (cid:1) For contact cavity arrangements, DB 21W1 DBMMV21C1SN DBMMZ21C1SN DBMMN21C1SN see page 223. DC 8W8 DCMMV8C8SN DCMMZ8C8SN DCMMN8C8SN (cid:1) For P.C. hole patterns, see pages 241-242. (cid:1) For panel cutouts, see page 221. DC 13W6 DCMMV13C6SN DCMMZ13C6SN DCMMN13C6SN (cid:1) For hardware views (Standard), see page 226. DC 17W5 DCMMV17C5SN DCMMZ17C5SN DCMMN17C5SN (cid:1) For alternate 50 Ohm coaxial configuration, DC 21WA4 DCMMV21CA4SN DCMMZ21CA4SN DCMMN21CA4SN see page 225. DC 25W3 DCMMV25C3SN DCMMZ25C3SN DCMMN25C3SN DC 27W2 DCMMV27C2SN DCMMZ27C2SN DCMMN27C2SN Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1SN For DD shell size, see page 153. (cid:2)Keyed Engaging Face Ø 0,51 A 2,54 (.020) C (1.00) 0,62 (.024) B E D L 10° Screw lock, boardlock, and signal contacts removed for clarity 0,82 BOARDLOCK (.032) Ø 0,76 3,45 (.136) (.030) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF #4-40 UNC F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) 0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 151

D Subminiature Military/High Reliability Coaxial Straight PCB (Size DD) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24C7PN DDMMZ24C7PN DDMMN24C7PN DD 36W4 DDMMV36C4PN DDMMZ36C4PN DDMMN36C4PN DD 43W2 DDMMV43C2PN DDMMZ43C2PN DDMMN43C2PN DD 47W1 DDMMV47C1PN DDMMZ47C1PN DDMMN47C1PN Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24XPN Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 256. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A Ø 0,51 (.020) 2,54 C (.100) 0,62 (.024) B E D L Screw lock, boardlock, and signal contacts 10° removed for clarity BOARDLOCK 5,69 0,82 Ø 0,76 (.224) 3,45 (.032) (.030) 4,52 2,84 (.136) (.178) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and coaxial contact #4-40 UNC removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 152 Dimensions subject to change

D Subminiature Military/High Reliability Coaxial Straight PCB (Size DD) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24C7SN DDMMZ24C7SN DDMMN24C7SN DD 36W4 DDMMV36C4SN DDMMZ36C4SN DDMMN36C4SN DD 43W2 DDMMV43C2SN DDMMZ43C2SN DDMMN43C2SN DD 47W1 DDMMV47C1SN DDMMZ47C1SN DDMMN47C1SN Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24X7SN Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 259. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A Ø 0,51 (.020) C 2,54 (.100) 0,62 (.024) B E D L 10° Screw lock, boardlock, and signal contacts removed for clarity BOARDLOCK 0,82 Ø 0,76 5,69 3,45 (.032) (.030) (.224) (.136) 4,52 (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF #4-40 UNC F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and coaxial contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 153

D Subminiature Military/High Reliability 40 A High Power 90°PCB (Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMMP5H1PJ DEMMC5H1PJ DEMMD5H1PJ DEMMG5H1PJ DA 7W2 DAMMP7H2PJ DAMMC7H2PJ DAMMD7H2PJ DAMMG7H2PJ DA 11W1 DAMMP11H1PJ DAMMC11H1PJ DAMMD11H1PJ DAMMG11H1PJ DA 3W3 DAMMP3H3PJ DAMMC3H3PJ DAMMD3H3PJ DAMMG3H3PJ DA 3WK3(cid:2) DAMMP3HK3PJTM DAMMC3HK3PJTM DAMMD3HK3PJTM DAMMG3HK3PJTM DB 5W5 DBMMP5H5PJ DBMMC5H5PJ DBMMD5H5PJ DBMMG5H5PJ DB 9W4 DBMMP9H4PJ DBMMC9H4PJ DBMMD9H4PJ DBMMG9H4PJ DB 13W3 DBMMP13H3PJ DBMMC13H3PJ DBMMD13H3PJ DBMMG13H3PJ Reader’s Resource (cid:1) For contact cavity arrangements, DB 17W2 DBMMP17H2PJ DBMMC17H2PJ DBMMD17H2PJ DBMMG17H2PJ see page 222. DB 21W1 DBMMP21H1PJ DBMMC21H1PJ DBMMD21H1PJ DBMMG21H1PJ (cid:1) For P.C. hole patterns, see pages 244-245. DC 8W8 DCMMP8H8PJ DCMMC8H8PJ DCMMD8H8PJ DCMMG8H8PJ (cid:1) For panel cutouts, see page 221. DC 13W6 DCMMP13H6PJ DCMMC13H6PJ DCMMD13H6PJ DCMMG13H6PJ (cid:1) For hardware views (Standard), see page 226. DC 17W5 DCMMP17H5PJ DCMMC17H5PJ DCMMD17H5PJ DCMMG17H5PJ (cid:1) For alternate bracket configuration (when DC 21WA4 DCMMP21HA4PJ DCMMC21HA4PJ DCMMD21HA4PJ DCMMG21HA4PJ connectors are supplied without boardlocks), DC 25W3 DCMMP25H3PJ DCMMC25H3PJ DCMMD25H3PJ DCMMG25H3PJ see page 226. DC 27W2 DCMMP27H2PJ DCMMC27H2PJ DCMMD27H2PJ DCMMG27H2PJ Notes: For DD shell size, see page 156. (cid:2)Keyed Engaging Face 3,89 (.153) MIN. A C B 20,57 ± 0,38 (.810 ±.015) E D L 2,92 BOARDLOCK 10° (.115) Screw lock, boardlock, and signal contacts Ø 0,76 Ø 3,18 removed for clarity (.030) (.125) 4,33 ± 0,38 2,84 (.170 ± .015) (.112) BRACKET, METAL 12,34 RIVNUT 11,53 ± 0,25 (.486) 8,64 #4-40 UNC (.454 ± .010) (.340) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 154 Dimensions subject to change

D Subminiature Military/High Reliability 40 A High Power 90°PCB (Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DE 5W1 DEMMP5H1SJ DEMMC5H1SJ DEMMD5H1SJ DEMMG5H1SJ DA 7W2 DAMMP7H2SJ DAMMC7H2SJ DAMMD7H2SJ DAMMG7H2SJ DA 11W1 DAMMP11H1SJ DAMMC11H1SJ DAMMD11H1SJ DAMMG11H1SJ DA 3W3 DAMMP3H3SJ DAMMC3H3SJ DAMMD3H3SJ DAMMG3H3SJ DA 3WK3(cid:2) DAMMP3HK3SJTM DAMMC3HK3SJTM DAMMD3HK3SJTM DAMMG3HK3SJTM DB 5W5 DBMMP5H5SJ DBMMC5H5SJ DBMMD5H5SJ DBMMG5H5SJ DB 9W4 DBMMP9H4SJ DBMMC9H4SJ DBMMD9H4SJ DBMMG9H4SJ DB 13W3 DBMMP13H3SJ DBMMC13H3SJ DBMMD13H3SJ DBMMG13H3SJ Reader’s Resource DB 17W2 DBMMP17H2SJ DBMMC17H2SJ DBMMD17H2SJ DBMMG17H2SJ (cid:1) For contact cavity arrangements, DB 21W1 DBMMP21H1SJ DBMMC21H1SJ DBMMD21H1SJ DBMMG21H1SJ see page 223. DC 8W8 DCMMP8H8SJ DCMMC8H8SJ DCMMD8H8SJ DCMMG8H8SJ (cid:1) For P.C. hole patterns, see pages 247-248. DC 13W6 DCMMP13H6SJ DCMMC13H6SJ DCMMD13H6SJ DCMMG13H6SJ (cid:1) For panel cutouts, see page 221. DC 17W5 DCMMP17H5SJ DCMMC17H5SJ DCMMD17H5SJ DCMMG17H5SJ (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when DC 21WA4 DCMMP21HA4SJ DCMMC21HA4SJ DCMMD21HA4SJ DCMMG21HA4SJ DC 25W3 DCMMP25H3SJ DCMMC25H3SJ DCMMD25H3SJ DCMMG25H3SJ connectors are supplied without boardlocks), see page 226. DC 27W2 DCMMP27H2SJ DCMMC27H2SJ DCMMD27H2SJ DCMMG27H2SJ Notes: For DD shell size, see page 157. (cid:2)Keyed. Engaging Face 3,89 (.153) MIN. 20,57 ± 0,38 (.810 ± .015) L 2,92 (.115) Screw lock, boardlock, and signal contacts Ø 0,76 removed for clarity (.030) 4,33 ± 0,38 (.170 ± .015) 2,84 BRACKET, (.112) METAL 12,34 RIVNUT 11,53 ± 0,25 (.486) 8,64 #4-40 UNC (.454 ± .010) (.340) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 155

D Subminiature Military/High Reliability 40 A High Power 90°PCB (Size DD) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMMP24H7PJ DDMMC24H7PJ DDMMD24H7PJ DDMMG24H7PJ DD 36W4 DDMMP36H4PJ DDMMC36H4PJ DDMMD36H4PJ DDMMG36H4PJ DD 43W2 DDMMP43H2PJ DDMMC43H2PJ DDMMD43H2PJ DDMMG43H2PJ DD 47W1 DDMMP47H1PJ DDMMC47H1PJ DDMMD47H1PJ DDMMG47H1PJ Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 246. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 ± 0,38 (.810 ± .015) E D L 2,92 (.115) BOARDLOCK 10° Ø 3.18 Ø0,76 Screw lock, boardlock, and signal contacts (.125) (.030) removed for clarity 2,84 (.112) 5,68 4,33 ± 0,38 (.224) (.170 ± .015) BRACKET, METAL 13,74 RIVNUT 11,53 ± 0,25 (.541) 10,06 #4-40 UNC (.454 ± .010) (.396) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 156 Dimensions subject to change

D Subminiature Military/High Reliability 40 A High Power 90°PCB (Size DD) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Part Number Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks Without Boardlocks With Boardlocks DD 24W7 DDMMP24H7SJ DDMMC24H7SJ DDMMD24H7SJ DDMMG24H7SJ DD 36W4 DDMMP36H4SJ DDMMC36H4SJ DDMMD36H4SJ DDMMG36H4SJ DD 43W2 DDMMP43H2SJ DDMMC43H2SJ DDMMD43H2SJ DDMMG43H2SJ DD 47W1 DDMMP47H1SJ DDMMC47H1SJ DDMMD47H1SJ DDMMG47H1SJ Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 249. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. (cid:1) For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 ± 0,38 (.810 ± .015) E D L 10° 2,92 BOARDLOCK Ø 0,76 Ø 3,18 (.115) Screw lock, boardlock, and signal contacts (.030) (.125) removed for clarity 2,84 (.112) 5,68 4,33 ± 0,38 (.224) (.170 ± .015) BRACKET, METAL (1.35,4714) 10,06 #4R-I4V0N UUNTC (1.14,5543 ± ± .00,1205) (.396) F W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock, and high power contact removed for clarity #4-40 UNC Note: (cid:3)Dimension varies with alternate bracket configuration, see Reader’s Resource page 226. Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 157

D Subminiature Military/High Reliability 40 A High Power Straight PCB (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5H1PN DEMMZ5H1PN DEMMN5H1PN DA 7W2 DAMMV7H2PN DAMMZ7H2PN DAMMN7H2PN DA 11W1 DAMMV11H1PN DAMMZ11H1PN DAMMN11H1PN DA 3W3 DAMMV3H3PN DAMMZ3H3PN DAMMN3H3PN DA 3WK3(cid:2) DAMMV3HK3PNTM DAMMZ3HK3PNTM DAMMN3HK3PNTM DB 5W5 DBMMV5H5PN DBMMZ5H5PN DBMMN5H5PN DB 9W4 DBMMV9H4PN DBMMZ9H4PN DBMMN9H4PN Reader’s Resource DB 13W3 DBMMV13H3PN DBMMZ13H3PN DBMMN13H3PN (cid:1) For contact cavity arrangements, DB 17W2 DBMMV17H2PN DBMMZ17H2PN DBMMN17H2PN see page 222. DB 21W1 DBMMV21H1PN DBMMZ21H1PN DBMMN21H1PN (cid:1) For P.C. hole patterns, see pages 254-255. DC 8W8 DCMMV8H8PN DCMMZ8H8PN DCMMN8H8PN (cid:1) For panel cutouts, see page 221. DC 13W6 DCMMV13H6PN DCMMZ13H6PN DCMMN13H6PN (cid:1) For hardware views (Standard), see page 226. DC 17W5 DCMMV17H5PN DCMMZ17H5PN DCMMN17H5PN DC 21WA4 DCMMV21HA4PN DCMMZ21HA4PN DCMMN21HA4PN DC 25W3 DCMMV25H3PN DCMMZ25H3PN DCMMN25H3PN DC 27W2 DCMMV27H2PN DCMMZ27H2PN DCMMN27H2PN Notes: For DD shell sizes, see page 160. (cid:2)Keyed. Engaging Face A C B E D 10° Ø 0,76 BOARDLOCK Ø 3,18 (.030) 4,65 (.125) 4,52 2,84 (.183) (.178) (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F W STANDOFF L #4-40 UNC 6,50 ± 0,25 (.256 ± .010) SCREW LOCK Screw lock, boardlock and high power contact #4-40 UNC removed for clarity Dimensions A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 158 Dimensions subject to change

D Subminiature Military/High Reliability 40 A High Power Straight PCB (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5H1SN DEMMZ5H1SN DEMMN5H1SN DA 7W2 DAMMV7H2SN DAMMZ7H2SN DAMMN7H2SN DA 11W1 DAMMV11H1SN DAMMZ11H1SN DAMMN11H1SN DA 3W3 DAMMV3H3SN DAMMZ3H3SN DAMMN3H3SN DA 3WK3(cid:2) DAMMV3HK3SNTM DAMMZ3HK3SNTM DAMMN3HK3SNTM DB 5W5 DBMMV5H5SN DBMMZ5H5SN DBMMN5H5SN DB 9W4 DBMMV9H4SN DBMMZ9H4SN DBMMN9H4SN Reader’s Resource DB 13W3 DBMMV13H3SN DBMMZ13H3SN DBMMN13H3SN (cid:1) For contact cavity arrangements, DB 17W2 DBMMV17H2SN DBMMZ17H2SN DBMMN17H2SN see page 223. DB 21W1 DBMMV21H1SN DBMMZ21H1SN DBMMN21H1SN (cid:1) For P.C. hole patterns, see pages 257-258. DC 8W8 DCMMV8H8SN DCMMZ8H8SN DCMMN8H8SN (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. DC 13W6 DCMMV13H6SN DCMMZ13H6SN DCMMN13H6SN DC 17W5 DCMMV17H5SN DCMMZ17H5SN DCMMN17H5SN DC 21WA4 DCMMV21HA4SN DCMMZ21HA4SN DCMMN21HA4SN DC 25W3 DCMMV25H3SN DCMMZ25H3SN DCMMN25H3SN DC 27W2 DCMMV27H2SN DCMMZ27H2SN DCMMN27H2SN Notes: For DD shell sizes, see page 161. (cid:2)Keyed. Engaging Face A C B E D 10° BOARDLOCK Ø 0,76 4,65 Ø 3,18 (.030) 4,52 (.178) (.183) (.125) 2,84 (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF W L #4-40 UNC 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Screw lock, boardlock and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 159

D Subminiature Military/High Reliability 40 A High Power Straight PCB (Size DD) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24H7PN DDMMZ24H7PN DDMMN24H7PN DD 36W4 DDMMV36H4PN DDMMZ36H4PN DDMMN36H4PN DD 43W2 DDMMV43H2PN DDMMZ43H2PN DDMMN43H2PN DD 47W1 DDMMV47H1PN DDMMZ47H1PN DDMMN47H1PN Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 256. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B E D 10° Ø 3,18 5,69 BOARDLOCK (.125) Ø 0,76 (.224) 4,65 (.030) 4,52 2,84 (.183) (.178) (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC W L (6.2,5506 ±± 0.0,2150) SC#R4-E4W0 U LNOCCK Screw lock, boardlock, and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 160 Dimensions subject to change

D Subminiature Military/High Reliability 40 A High Power Straight PCB (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24H7SN DDMMZ24H7SN DDMMN24H7SN DD 36W4 DDMMV36H4SN DDMMZ36H4SN DDMMN36H4SN DD 43W2 DDMMV43H2SN DDMMZ43H2SN DDMMN43H2SN DD 47W1 DDMMV47H1SN DDMMZ47H1SN DDMMN47H1SN Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 259. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B E D 10° BOARDLOCK Ø 0,76 Ø 3,18 5,69 (.030) (.125) (.224) 2,84 4,65 4,52 (.178) (.112) (.183) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC L W 6,50 ± 0,25 (.256 ± .010) SCREW LOCK #4-40 UNC Screw lock, boardlock and high power contact removed for clarity Dimensions A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 161

D Subminiature Military/High Reliability High Voltage Straight PCB (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5V1PN DEMMZ5V1PN DEMMN5V1PN DA 7W2 DAMMV7V2PN DAMMZ7V2PN DAMMN7V2PN DA 11W1 DAMMV11V1PN DAMMZ11V1PN DAMMN11V1PN DA 3W3 DAMMV3V3PN DAMMZ3V3PN DAMMN3V3PN DA 3WK3(cid:2) DAMMV3VK3PNTM DAMMZ3VK3PNTM DAMMN3VK3PNTM DB 5W5 DBMMV5V5PN DBMMZ5V5PN DBMMN5V5PN Reader’s Resource DB 9W4 DBMMV9V4PN DBMMZ9V4PN DBMMN9V4PN (cid:1) For contact cavity arrangements, DB 13W3 DBMMV13V3PN DBMMZ13V3PN DBMMN13V3PN see page 222. DB 17W2 DBMMV17V2PN DBMMZ17V2PN DBMMN17V2PN (cid:1) For P.C. hole patterns, see pages 254-255. (cid:1) For panel cutouts, see page 221. DB 21W1 DBMMV21V1PN DBMMZ21V1PN DBMMN21V1PN (cid:1) For hardware views (Standard), see page 226. DC 8W8 DCMMV8V8PN DCMMZ8V8PN DCMMN8V8PN DC 13W6 DCMMV13V6PN DCMMZ13V6PN DCMMN13V6PN DC 17W5 DCMMV17V5PN DCMMZ17V5PN DCMMN17V5PN DC 21WA4 DCMMV21VA4PN DCMMZ21VA4PN DCMMN21VA4PN DC 25W3 DCMMV25V3PN DCMMZ25V3PN DCMMN25V3PN DC 27W2 DCMMV27V2PN DCMMZ27V2PN DCMMN27V2PN Notes: For DD shell size, see page 164. (cid:2)Keyed. Engaging Face A C B E D 10° Ø 0,76 (.030) 4,52 BOARDLOCK (.178) 2,84 (.112) 7,62 ± 0,25 2,92 (.300 ± .010) (.115) STANDOFF F #4-40 UNC L W 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Hardware and high voltage contact removed for clarity Dimensions Plug A B C D E F W W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,37 (.015) ±0,41 (.016) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 162 Dimensions subject to change

D Subminiature Military/High Reliability High Voltage Straight PCB (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DE 5W1 DEMMV5V1SN DEMMZ5V1SN DEMMN5V1SN DA 7W2 DAMMV7V2SN DAMMZ7V2SN DAMMN7V2SN DA 11W1 DAMMV11V1SN DAMMZ11V1SN DAMMN11V1SN DA 3W3 DAMMV3V3SN DAMMZ3V3SN DAMMN3V3SN DA 3WK3(cid:2) DAMMV3VK3SNTM DAMMZ3VK3SNTM DAMMN3VK3SNTM DB 5W5 DBMMV5V5SN DBMMZ5V5SN DBMMN5V5SN Reader’s Resource DB 9W4 DBMMV9V4SN DBMMZ9V4SN DBMMN9V4SN (cid:1) For contact cavity arrangements, DB 13W3 DBMMV13V3SN DBMMZ13V3SN DBMMN13V3SN see page 223. DB 17W2 DBMMV17V2SN DBMMZ17V2SN DBMMN17V2SN (cid:1) For P.C. hole patterns, see pages 257-258. DB 21W1 DBMMV21V1SN DBMMZ21V1SN DBMMN21V1SN (cid:1) For panel cutouts, see page 221. DC 8W8 DCMMV8V8SN DCMMZ8V8SN DCMMN8V8SN (cid:1) For hardware views (Standard), see page 226. DC 13W6 DCMMV13V6SN DCMMZ13V6SN DCMMN13V6SN DC 17W5 DCMMV17V5SN DCMMZ17V5SN DCMMN17V5SN DC 21WA4 DCMMV21VA4SN DCMMZ21VA4SN DCMMN21VA4SN DC 25W3 DCMMV25V3SN DCMMZ25V3SN DCMMN25V3SN DC 27W2 DCMMV27V2SN DCMMZ27V2SN DCMMN27V2SN Notes: For DD shell size, see page 165. (cid:2)Keyed. Engaging Face A C B E D 10° Ø 0,76 4,52 2,84 (.030) (.178) (.112) BOARDLOCK 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF L W #4-40 UNC 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Hardware and high voltage contact removed for clarity. Dimensions Receptacle A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 163

D Subminiature Military/High Reliability High Voltage Straight PCB (Size DD) Plug Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24V7PN DDMMZ24V7PN DDMMN24V7PN DD 36W4 DDMMV36V4PN DDMMZ36V4PN DDMMN36V4PN DD 43W2 DDMMV43V2PN DDMMZ43V2PN DDMMN43V2PN DD 47W1 DDMMV47V1PN DDMMZ47V1PN DDMMN47V1PN Reader’s Resource (cid:1) For contact cavity arrangements, see page 222. (cid:1) For P.C. hole patterns, see page 256. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B E D 10° Ø 0,76 (.030) 4,52 (5.2,6294) 2,84 BOARDLOCK (.178) (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF W #4-40 UNC L (6.2,5506 ±± 0.0,2150) S#4C-R40E WUN LCOCK Hardwarreem aonvde hdi gfohr v collatarigtye. contact Dimensions Plug A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,41 (.016) ±0,25 (.010) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) Dimensions are shown in mm (inch) 164 Dimensions subject to change

D Subminiature Military/High Reliability High Voltage Straight PCB (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Part Number Part Number Part Number Without Screw Locks Without Screw Locks With Screw Locks Shell Size Layout Without Boardlocks With Boardlocks With Boardlocks DD 24W7 DDMMV24V7SN DDMMZ24V7SN DDMMN24V7SN DD 36W4 DDMMV36V4SN DDMMZ36V4SN DDMMN36V4SN DD 43W2 DDMMV43V2SN DDMMZ43V2SN DDMMN43V2SN DD 47W1 DDMMV47V1SN DDMMZ47V1SN DDMMN47V1SN Reader’s Resource (cid:1) For contact cavity arrangements, see page 223. (cid:1) For P.C. hole patterns, see page 259. (cid:1) For panel cutouts, see page 221. (cid:1) For hardware views (Standard), see page 226. Engaging Face A C B E D 10° Ø 0,76 5,69 (.030) 4,52 (.224) BOARDLOCK (.178) 2,84 (.112) 7,62 ± 0,25 (.300 ± .010) 2,92 (.115) F STANDOFF L W #4-40 UNC 6,50 ± 0,25 SCREW LOCK (.256 ± .010) #4-40 UNC Hardware and high voltage contacts removed for clarity Dimensions Receptacle A B C D E F W L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,25 (.010) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 165

D Subminiature Military/High Reliability Cable Solder Cup Plug Part Numbers Dual Clinch Nut Shell Size Layout Through Hole Float Mount #4-40 UNC DE 5W1 DEMM5W1P DEMMY5W1P DEMME5W1P DA 7W2 DAMM7W2P DAMMY7W2P DAMME7W2P DA 11W1 DAMM11W1P DAMMY11W1P DAMME11W1P DA 3W3 DAMM3W3P DAMMY3W3P DAMME3W3P DA 3WK3(cid:2) DAMM3WK3P DAMMY3WK3P DAMME3WK3P DB 5W5 DBMMP5W5P DBMMY5W5P DBMME5W5P DB 9W4 DBMM9W4P DBMMY9W4P DBMME9W4P DB 13W3 DBMM13W3P DBMMY13W3P DBMME13W3P DB 17W2 DBMM17W2P DBMMY17W2P DBMME17W2P DB 21W1 DBMM21W1P DBMMY21W1P DBMME21W1P DC 8W8 DCMM8W8P DCMMY8W8P DCMME8W8P Reader’s Resource (cid:1) For contact cavity arrangements, DC 13W6 DCMM13W6P DCMMY13W6P DCMME13W6P DC 17W5 DCMM17W5P DCMMY17W5P DCMME17W5P see page 222. (cid:1) For panel cutouts, see page 221. DC 21WA4 DCMM21WA4P DCMMY21WA4P DCMME21WA4P (cid:1) For hardware views (Standard), see page 226. DC 25W3 DCMM25W3P DCMMY25W3P DCMME25W3P DC 27W2 DCMM27W2P DCMMY27W2P DCMME27W2P DD 24W7 DDMM24W7P DDMMY24W7P DDMME24W7P DD 36W4 DDMM36W4P DDMMY36W4P DDMME36W4P DD 43W2 DDMM43W2P DDMMY43W2P DDMME43W2P DD 47W1 DDMM47W1P DDMMY47W1P DDMME47W1P Note: (cid:2)Keyed. DD Configuration Engaging Face 5,69 A (.224) C Ø 3,05 2,84 (.112) (.120) B K E D L 10° 10,72 (.422) 2,84 MAX (.112) F W Dimensions A B C D E F W W K K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010) DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) — 1,206 (.0475) — 0,76 (.030) DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) — 6,84 (.269) — 1,52 (.060) 0,99 (.039) Dimensions are shown in mm (inch) 166 Dimensions subject to change

D Subminiature Military/High Reliability Cable Solder Cup Receptacle Part Numbers Dual Clinch Nut Shell Size Layout Through Hole Float Mount #4-40 UNC DE 5W1 DEMM5W1S DEMMY5W1S DEMME5W1S DA 7W2 DAMM7W2S DAMMY7W2S DAMME7W2S DA 11W1 DAMM11W1S DAMMY11W1S DAMME11W1S DA 3W3 DAMM3W3S DAMMY3W3S DAMME3W3S DA 3WK3(cid:2) DAMM3WK3S DAMMY3WK3S DAMME3WK3S DB 5W5 DBMM5W5S DBMMY5W5S DBMME5W5S DB 9W4 DBMM9W4S DBMMY9W4S DBMME9W4S DB 13W3 DBMM13W3S DBMMY13W3S DBMME13W3S DB 17W2 DBMM17W2S DBMMY17W2S DBMME17W2S DB 21W1 DBMM21W1S DBMMY21W1S DBMME21W1S DC 8W8 DCMM8W8S DCMMY8W8S DCMME8W8S Reader’s Resource (cid:1) For contact cavity arrangements, DC 13W6 DCMM13W6S DCMMY13W6S DCMME13W6S see page 223. DC 17W5 DCMM17W5S DCMMY17W5S DCMME17W5S (cid:1) For panel cutouts, see page 221. DC 21WA4 DCMM21WA4S DCMMY21WA4S DCMME21WA4S (cid:1) For hardware views (Standard), see page 226. DC 25W3 DCMM25W3S DCMMY25W3S DCMME25W3S DC 27W2 DCMM27W2S DCMMY27W2S DCMME27W2S DD 24W7 DCMM24W7S DCMMY24W7S DCMME24W7S DD 36W4 DCMM36W4S DCMMY36W4S DCMME36W4S DD 43W2 DCMM43W2S DCMMY43W2S DCMME43W2S DD 47W1 DCMM47W1S DCMMY47W1S DCMME47W1S Note: (cid:2)Keyed. Engaging Face DD Configuration 5,69 A (.224) 2,84 C (.112) Ø 3,05 B (.120) K E D L 10° 9,91 (.390) 2,84 (.112) MAX F W Dimensions A B C D E F W K L Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010) DE 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 167

None

D Subminiature Space/High Reliability ITT Cannon has a long history of providing high performance D Subminiature connectors for space applications (qualified by NASA/ GFSC and the European Space Agency). Space/ High Reliabilty D*M and D*MA connectors meet stringent tests for outgassing and residual magnetism and are suitable for use in space, medical, and high performance military/aerospace applications. D*M and D*MA connectors are designed to be comparable to MIL- C-24308. The newest product group is High Density D*MA crimp connectors. Applications (cid:1) Space - Low/High Orbit Satellites (cid:1) Medical Product Features (cid:1) Non-Magnetic (cid:1) No Outgassing Specifications Temperature Rating −65°at 125°C Signal Contact Current Rating 5 A (20 AWG) Signal Contact Resistance 55 millivolt max. at 7.5 A test current Wire Accommodation (Solder) 20 AWG max. Wire Accommodation (Crimp) 18/30 AWG Coaxial Impedance 50 Ohm Loss VSWR Less than 1,3 - 1,0 up to 500 Mhz Coaxial Insertion Loss 1db loss at 500 Mhz Dimensions are shown in mm (inch) Dimensions subject to change 169

D Subminiature Space/High Reliability Dielectric Withstanding Voltage Altitude (meter/feet) Sea Level Sea Level 6 096/20 000 6 096/20 000 15 240/50 000 15 240/50 000 21 336/70 000 21 336/70 000 Average Flashover 1500/1700 1500/1700 1000/1000 1000/1000 500/650 500/650 500/500 500/500 Test 1000/1250 1000/1250 650/750 650/750 325/475 325/475 325/375 325/375 Type of Contact 90° Straight 90° Straight 90° Straight 90° Straight Center Conductor Average 1200 1500 900 1000 600 700 400 500 to Coaxial Shell Flashover Test 800 1000 600 550 400 475 275 325 Coaxial Shell to Nearest Average — 1500 — 1500 — 900 — 650 Solder Cup Contact Flashover Test — 1000 — 1000 — 800 — 425 High Power Contact and/or Average 1500 1500 1000 1000 500 500 500 500 Coaxial Shell to Plug Shell Flashover Test 1000 1000 650 650 325 325 325 325 Size 20 Signal Contact Average 1200 1200 1000 1000 650 650 500 500 Flashover Test 1250 1250 750 750 475 475 375 375 All voltage figures are rms AC 60 rms cps. Measured at approximately +25°C, 50% rh. For additional performance specifications refer to 24308-Style. Residual Magnetism Level Residual Magnetism Suffix Code 20 000 Gamma NM 200 Gamma NMB Note: NMC is available by special request. Consult factory for details. Dimensions are shown in mm (inch) 170 Dimensions subject to change

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

D Subminiature Space/High Reliability NASA/GSFC Cross Reference NASA/GSFC ITT Cannon NASA/GSFC ITT Cannon NASA/GSFC ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number GO8P1 030-2042-002 311-P-10-12S-B-15 DBM13W3S-NMB-76 311-P-10-24P-B-12 DDM43W2P-NMB-77 GO8S1 031-1147-002 311-P-10-12S-C-15 DBM-13W3S-NMC-76 311-P-10-24S-C-12 DDM-43W2S-NMB-77 S-311-P-4/6GCP1 DM53740-17 311-P-10-13P-B-12 DBM17W2PNMB77 311-P-10-24S-C-15 DDM-43W2S-NMC-76 S-311-P-4/6GCP2 DM53740-15 311-P-10-13P-B-15 DBM-17W2P-NMB-76 311-P-10-25P-C-15 DDM47W1P-NMC-76 S-311-P-4/6GCP3 DM53740-16 311-P-10-13P-C-12 DBM17W2P-NMC-77 311-P-10-25S-C-15 DDM-47W1S-NMC-76 S-311-P-4/6GCP4 DM53740-18 311-P-10-13P-C-15 DBM-17W2P-NMC-76 311-P-10-3S-B-12 DBM25PNMB77 S-311-P-4/6GCRP1 DM53741-12 311-P-10-13S-B-12 DBM17W2SNMB77 311-P-10-3P-B-15 DBM25PNMB76 S-311-P-4/6GCRP2 DM53741-11 311-P-10-13S-C-12 DBM-17W2S-NMC-77 311-P-10-3P-C-12 DBM25PNMC77 S-311-P-4/6GCRP3 DM53741-10 311-P-10-13S-C-15 DBM-17W2S-NMC-76 311-P-10-3P-C-15 DBM25PNMC76 S-311-P-4/6GCRP4 DM53741-13 311-P-10-14P-B-12 DBM-21W1P-NMB-77 311-P-10-3S-B-12 DBM25PNMB77 S-311-P-4/6GCRS1 DM53743-18 311-P-10-14P-B-15 DBM-21W1P-NMB-76 311-P-10-3S-B-15 DBM-25S-NMB-76 S-311-P-4/6GCRS2 DM53743-16 311-P-10-14S-B-12 DBM-21W1S-NMB-77 311-P-10-3S-C-12 DBM-25S-NMC-77 S-311-P-4/6GCRS3 DM53743-17 311-P-10-14S-B-15 DBM-21W1S-NMB-76 311-P-10-3S-C-15 DBM-25S-NMC-76 S-311-P-4/6GCRS4 DM53743-19 311-P-10-14S-C-15 DBM-21W1S-NMC-76 311-P-10-4P-B-12 DCM37PNMB77 S-311-P-4/6GCS1 DM53742-18 311-P-10-15P-B-12 DCM-8W8P-NMB-77 311-P-10-4P-B-15 DCM37PNMB76 S-311-P-4/6GCS2 DM53742-16 311-P-10-15P-B-15 DCM8W8PNMB76 311-P-10-4P-C-12 DCM-37P-NMC-77 S-311-P-4/6GCS3 DM53742-17 311-P-10-15P-C-12 DCM-8W8P-NMC-77 311-P-10-4P-C-15 DCM37PNMC76 S-311-P-4/6GCS4 DM53742-19 311-P-10-15P-C-15 DCM8W8PNMC76 311-P-10-4S-B-12 DCM37SNMB77 S-311-P-4/6GHP6 DM51157-8 311-P-10-15S-B-12 DCM-8W8S-NMB-77 311-P-10-4S-B-15 DCM-37S-NMB-76 S-311-P-4/6GHRP6 DM51157-5005 311-P-10-15S-B-15 DCM8W8SNMB76 311-P-10-4S-C-12 DCM-37S-NMC-77 S-311-P-4/6GHRS6 DM51155-5005 311-P-10-15S-C-12 DCM-8W8S-NMC-77 311-P-10-4S-C-15 DCM-37S-NMC-76 S-311-P-4/6GHS6 DM51155-7 311-P-10-15S-C-15 DCM-8W8S-MNC-76 311-P-10-5P-B-12 DDM50PNMB77 311P409-1P-B-12 DEMA9PNMBK47FO 311-P-10-16P-B-12 DCM-13W6P-NMB-77 311-P-10-5P-B-15 DDM50PNMB76 311P409-1P-B-15 DEMAK9PNMBK47FO 311-P-10-16P-B-15 DCM-13W6P-NMB-76 311-P-10-5P-C-12 DDM-50P-NMC-77 311P409-1S-B-12 DEMA9SNMBK47FO 311-P-10-16P-C-12 DCM-13W6P-NMC-77 311-P-10-5P-C-15 DDM50PNMC76 311P409-1S-B-15 DEMAK9SNMBK47FO 311-P-10-16P-C-15 DCM-13W6P-NMC-76 311-P-10-5S-B-12 DDM50SNMB77 311P409-2P-B-12 DEMA15PNMBK47FO 311-P-10-16S-B-12 DCM-13W6S-NMB-77 311-P-10-5S-B-15 DDM50SNMB76 311P409-2P-B-15 DEMAK15PNMBK47FO 311-P-10-16S-C-12 DCM-13W6S-NMC-77 311-P-10-5S-C-12 DDM-50S-NMC-77 311P409-2S-B-12 DEMA15SNMBK47FO 311-P-10-16S-C-15 DCM13W6SNMC76 311-P-10-5S-C-15 DDM-50S-NMC-76 311P409-2S-B-15 DEMAK15SNMBK47FO 311-P-10-17P-B-12 DCM17W5PNMB77 311-P-10-6P-B-12 DEM-5W1P-NMB-77 311P409-3P-B-12 DEMA25PNMBK47FO 311-P-10-17P-B-15 DCM-17W5P-NMB-76 311-P-10-6P-B-15 DEM-5W1P-NMB-76 311P409-3P-B-15 DEMAK25PNMBK47FO 311-P-10-17P-C-12 DCM-17W5P-NMC-77 311-P-10-6P-C-15 DEM-5W1P-NMC-76 311P409-3S-B-12 DEMA25SNMBK47FO 311-P-10-17P-C-15 DCM-17W5P-NMC-76 311-P-10-6S-B-12 DEM-5W1S-NMB-77 311P409-3S-B-15 DEMAK25SNMBK47FO 311-P-10-17S-B-12 DCM-17W5S-NMB-77 311-P-10-6P-C-15 DEM-5W1S-NMC-76 311P409-4P-B-12 DEMA37PNMBK47FO 311-P-10-17S-B-15 DCM17W5S-NMB-76 311-P-10-7P-B-12 DAM3W3PNMC76 311P409-4P-B-15 DEMAK37PNMBK47FO 311-P-10-17S-C-12 DCM-17W5S-NMC-77 311-P-10-7P-B-15 DAM-3W3P-NMB-76 311P409-4S-B-12 DEMA37SNMBK47FO 311-P-10-17S-C-15 DCM-17W5S-NMC-76 311-P-10-7P-C-12 DAM3W3P-NMC-77 311P409-4S-B-15 DEMAK37SNMBK47FO 311-P-10-18P-B-12 DCM-21WA4P-NMB-77 311-P-10-7P-C-15 DAM-3W3P-NMC-76 311P409-5P-B-12 DEMA50PNMBK47FO 311-P-10-18P-B-12 DCM21WA4P-NMB-76 311-P-10-7S-B-12 DAM3W3SNMB77 311P409-5S-B-15 DEMAK50PNMBK47FO 311-P-10-18P-C-15 DCM-21WA4P-NMC-76 311-P-10-7S-B-15 DAM3W3SNMB76 311P409-5S-B-12 DEMA50SNMBK47FO 311-P-10-18S-B-12 DCM-21WA4S-NMB-77 311-P-10-7S-C-12 DAM3W3S-NMC-76 311P409-5S-B-15 DEMAK50PNMBK47FO 311-P-10-18S-B-15 DCM21WA4S-NMB-76 311-P-10-7S-C-15 DAM-3W3S-NMC-76 S-311-P-4/10G1OP1 330-5291-081-02 311-P-10-19P-B-12 DCM-21W4P-NMB-77 311-P-10-8P-B-12 DAM-7W2P-NMB-77 S-311-P-4/10G1OS1 031-1007-052-05 311-P-10-19S-B-12 DCM-21W4S-NMB-77 311-P-10-8P-B-15 DAM-7W2P-NMB-76 311-P-10-B-1S-B-15 DEMB9S-NMB-76 311-P-10-19S-C-15 DCM21W4S-NMC-76 311-P-10-8P-C-15 DAM-7W2P-NMC-76 311-P-10-B-4S-B-15 DCMB37S-NMB-76 311-P-10-2P-B-12 DAM15PNMB77 311-P-10-8S-B-12 DAM-7W2S-NMB-77 311-P-10-1P-B-12 DEMPPNMB77 311-P-10-2P-B-15 DAM15PNMB76 311-P-10-8P-C-12 DAM7W2S-NMC-77 311-P-10-1P-B-15 DEM-9P-NMB-76 311-P-10-2P-C-12 DAM15PNMC77 311-P-10-8P-C-15 DAM-7W2S-NMC-76 311-P-10-1P-C-12 DEM9PNMC77 311-P-10-2P-C-15 DAM15PNMC76 311-P-10-9P-B-12 DAM-11W1P-NMB-77 311-P-10-1P-C-15 DEM9PNMC76 311-P-10-2S-B-12 DAM15SNMB77 311-P-10-9P-B-15 DAM-11W1P-NMB-76 311-P-10-1S-B-12 DEM9SNMB77 311-P-10-2S-B-15 DAM-15S-NMB-76 311-P-10-9P-C-12 DAM-11W1P-NMC-77 311-P-10-1S-B-15 DEM-9S-NMB-76 311-P-10-2S-C-15 DAM-15S-NMC-76 311-P-10-9P-C-15 DAM-11W1P-NMC-76 311-P-10-1S-C-12 DEM-9S-NMC-77 311-P-10-2S-C-15 DAM-15S-NMC-76 311-P-10-9S-B-12 DAM-11W1S-NMB-77 311-P-10-1S-C-15 DEM9SNMC76 311-P-10-20P-B-12 DCM-25W3P-NMB-77 311-P-10-9S-B-15 DAM-11W1S-NMB-76 311-P-10-10P-B-12 DBM5W5PNMB77 311-P-10-20P-C-15 DCM25W3P-NMB-76 311-P-10-9S-C-12 DAM-11W1S-NMC-77 311-P-10-10P-B-15 DBM-5W5P-NMB-76 311-P-10-20S-B-12 DCM-25W36-NMB-77 311-P-10-9S-C-15 DAM-11W1S-NMC-76 311-P-10-10P-C-12 DBM-5W5P-NMC-77 311-P-10-20S-C-12 DCM-25W3S-NMC-77 311-P-10B-1S-B-12 DEMB9SNMB77 311-P-10-10P-C-15 DBM-5W5P-NMC-76 311-P-10-20S-C-15 DCM-25W3S-NMC-76 311-P-10B-1S-C-12 DEMB-9S-NMC-77 311-P-10-10S-B-12 DBM-5W5S-NMB-77 311-P-10-21P-C-15 DCM27W2P-NMC-76 311-P-10B-1S-C-15 DEMB9S-NMC-76 311-P-10-10S-B-15 DBM-5W5S-NMB-76 311-P-10-21S-C-15 DCM-27W2S-NMC-76 311-P-10B-13S-B-15 DBMB-17W2S-NMB-76 311-P-10-10S-C-12 DBM-5W5S-NMC-77 311-P-10-22P-B-12 DDM-24W7P-NMB-77 311-P-10B-17S-B-15 DCMB-17W5S-NMB-76 311-P-10-10S-C-15 DBM-5W5S-NMC-76 311-P-10-22P-B-15 DDM24W7PNMB76 311-P-10B-2S-B-12 DAMB15SNMB77 311-P-10-11P-B-12 DBM-9W4P-NMB-77 311-P-10-22P-C-15 DDM-24W7P-NMC-76 311-P-10B-2S-C-12 DAMB-15S-NMC-77 311-P-10-11P-C-15 DBM-9W4P-NMC-76 311-P-10-22S-B-12 DDM24W7SNMB77 311-P-10B-2S-C-15 DAMB15SNMC76 311-P-10-11S-B-12 DBM-9W4S-NMB-77 311-P-10-22S-B-15 DDM-24W7S-NMB-76 311-P-10B-22S-B-15 DDMB-247S-NMB-76 311-P-10-11S-C-15 DBM-9W4S-NMC-76 311-P-10-22S-C-15 DDM-24W7S-NMC-76 311-P-10B-3S-B-12 DBMB-25S-NMB-77 311-P-10-12P-B-12 DBM13W3P-NMB-77 311-P-10-23P-B-12 DDM-36W4P-NMB-77 311-P-10B-3S-B-15 DBMB-25S-NMB-76 311-P-10-12P-B-15 DBM-13W3P-NMB-76 311-P-10-23S-B-12 DDM-36W4S-NMB-77 311-P-10B-3S-C-12 DBMB-25S-NMC-77 311-P-10-12P-C-15 DBM-13W3P-NMC-76 311-P-10-23S-B-15 DDM36W4SNMB76 311-P-10B-3S-C-15 DBMB25SNMC76 311-P-10-12S-B-12 DBM-13W3S-NMB-77 311-P-10-23S-C-15 DDM-36W4S-NMC-76 311-P-10B-4S-B-12 DCMB-37S-NMB-77 Dimensions are shown in mm (inch) Dimensions subject to change 195

D Subminiature Space/High Reliability NASA/GSFC Cross Reference NASA/GSFC ITT Cannon NASA/GSFC ITT Cannon NASA/GSFC ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number 311-P-10B-4S-C-12 DCMB-37S-NMC-77 311-P-10B-5S-C-12 DDMB-50S-NMC-77 311-P-10B-8S-B-15 DAMB-7W2S-NMB-76 311-P-10B-4S-C-15 DCMB37S-NMC-76 311-P-10B-5S-C-15 DDMB50S-NMC-76 311-P-10B-9S-B-12 DAMB-11W1S-NMB-77 311-P-10B-5S-B-12 DDMB-50S-NMB-77 311-P-10B-6S-B-15 DEMB-5W1S-NMB-76 311-P-10B-5S-B-15 DDMB50S-NMB-76 311-P-10B-8S-B-12 DAMB-7W2S-NMB-77 ESA/SCC Cross Reference ESA–SCC ITT Cannon ESA–SCC ITT Cannon ESA–SCC ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number 340100101B DEM5W1SNMB DEM5W1SNMBK52 340100101B DBM17W2POL3NMB DBM17W2POL3NMBK52 340100101B DAM7W2P1A7NNMB DAM7W2P1A7NNMBK52 340100101B DAM3W3SNMB DAM3W3SNMBK52 340100101B DBM21W1POL3NMB DBM21W1POL3NMBK52 340100101B DAM11W1P1A7NNMB DAM11W1P1A7NNMBK52 340100101B DAM7W2SNMB DAM7W2SNMBK52 340100101B DCM13W6POL3NMB DCM13W6POL3NMBK52 340100101B DBM9W4P1A7NNMB DBM9W4P1A7NNMBK52 340100101B DAM11W1SNMB DAM11W1SNMBK52 340100101B DCM17W5POL3NMB DCM17W5POL3NMBK52 340100101B DBM13W3P1A7NNMB DBM13W3P1A7NNMBK52 340100101B DBM5W5SNMB DBM5W5SNMBK52 340100101B DCM21WA4POL3NMB DCM21WA4POL3NMBK52 340100101B DBM17W2P1A7NNMB DBM17W2P1A7NNMBK52 340100101B DBM9W4SNMB DBM9W4SNMBK52 340100101B DCM25W3POL3NMB DCM25W3POL3NMBK52 340100101B DBM21W1P1A7NNMB DBM21W1P1A7NNMBK52 340100101B DBM13W3SNMB DBM13W3SNMBK52 340100101B DCM27W2POL3NMB DCM27W2POL3NMBK52 340100101B DCM13W6P1A7NNMB DCM13W6P1A7NNMBK52 340100101B DBM17W2SNMB DBM17W2SNMBK52 340100101B DDM24W7POL3NMB DDM24W7POL3NMBK52 340100101B DCM17W5P1A7NNMB DCM17W5P1A7NNMBK52 340100101B DBM21W1SNMB DBM21W1SNMBK52 340100101B DDM36W4POL3NMB DDM36W4POL3NMBK52 340100101B DCM21WA4P1A7NNMBDCM21WA4P1A7NNMBK52 340100101B DCM8W8SNMB DCM8W8SNMBK52 340100101B DDM43W2POL3NMB DDM43W2POL3NMBK52 340100101B DCM25W3P1A7NNMB DCM25W3P1A7NNMBK52 340100101B DCM13W6SNMB DCM13W6SNMBK52 340100101B DDM47W1POL3NMB DDM47W1POL3NMBK52 340100101B DCM27W2P1A7NNMB DCM27W2P1A7NNMBK52 340100101B DCM17W5SNMB DCM17W5SNMBK52 340100101B DEM5W1S1A0NNMB DEM5W1S1A0NNMBK52 340100101B DDM24W7P1A7NNMB DDM24W7P1A7NNMBK52 340100101B DCM21WA4SNMB DCM21WA4SNMBK52 340100101B DAM7W2S1A0NNMB DAM7W2S1A0NNMBK52 340100101B DDM36W4P1A7NNMB DDM36W4P1A7NNMBK52 340100101B DCM25W3SNMB DCM25W3SNMBK52 340100101B DAM11W1S1A0NNMB DAM11W1S1A0NNMBK52 340100101B DDM43W2P1A7NNMB DDM43W2P1A7NNMBK52 340100101B DCM27W2SNMB DCM27W2SNMBK52 340100101B DBM9W4S1A0NNMB DBM9W4S1A0NNMBK52 340100101B DDM47W1P1A7NNMB DDM47W1P1A7NNMBK52 340100101B DDM24W7SNMB DDM24W7SNMBK52 340100101B DBM13W3S1A0NNMB DBM13W3S1A0NNMBK52 340100101B DEM5W1S1A9NNMB DEM5W1S1A9NNMBK52 340100101B DDM36W4SNMB DDM36W4SNMBK52 340100101B DBM17W2S1A0NNMB DBM17W2S1A0NNMBK52 340100101B DAM7W2S1A9NNMB DAM7W2S1A9NNMBK52 340100101B DDM43W2SNMB DDM43W2SNMBK52 340100101B DBM21W1S1A0NNMB DBM21W1S1A0NNMBK52 340100101B DAM11W1S1A9NNMB DAM11W1S1A9NNMBK52 340100101B DDM47W1SNMB DDM47W1SNMBK52 340100101B DCM13W6S1A0NNMB DCM13W6S1A0NNMBK52 340100101B DBM9W4S1A9NNMB DBM9W4S1A9NNMBK52 340100101B DEM5W1PNMB DEM5W1PNMBK52 340100101B DCM17W5S1A0NNMB DCM17W5S1A0NNMBK52 340100101B DBM13W3S1A9NNMB DBM13W3S1A9NNMBK52 340100101B DAM3W3PNMB DAM3W3PNMBK52 340100101B DCM21WA4S1A0NNMBDCM21WA4S1A0NNMBK52 340100101B DBM17W2S1A9NNMB DBM17W2S1A9NNMBK52 340100101B DAM7W2PNMB DAM7W2PNMBK52 340100101B DCM25W3S1A0NNMB DCM25W3S1A0NNMBK52 340100101B DBM21W1S1A9NNMB DBM21W1S1A9NNMBK52 340100101B DAM11W1PNMB DAM11W1PNMBK52 340100101B DCM27W2S1A0NNMB DCM27W2S1A0NNMBK52 340100101B DCM13W6S1A9NNMB DCM13W6S1A9NNMBK52 340100101B DBM5W5PNMB DBM5W5PNMBK52 340100101B DDM24W7S1A0NNMB DDM24W7S1A0NNMBK52 340100101B DCM17W5S1A9NNMB DCM17W5S1A9NNMBK52 340100101B DBM9W4PNMB DBM9W4PNMBK52 340100101B DDM36W4S1A0NNMB DDM36W4S1A0NNMBK52 340100101B DCM21WA4S1A9NNMBDCM21WA4S1A9NNMBK52 340100101B DBM13W3PNMB DBM13W3PNMBK52 340100101B DDM43W2S1A0NNMB DDM43W2S1A0NNMBK52 340100101B DCM25W3S1A9NNMB DCM25W3S1A9NNMBK52 340100101B DBM17W2PNMB DBM17W2PNMBK52 340100101B DDM47W1S1A0NNMB DDM47W1S1A0NNMBK52 340100101B DCM27W2S1A9NNMB DCM27W2S1A9NNMBK52 340100101B DBM21W1PNMB DBM21W1PNMBK52 340100101B DEM5W1P1A0NNMB DEM5W1P1A0NNMBK52 340100101B DDM24W7S1A9NNMB DDM24W7S1A9NNMBK52 340100101B DCM8W8PNMB DCM8W8PNMBK52 340100101B DAM7W2P1A0NNMB DAM7W2P1A0NNMBK52 340100101B DDM36W4S1A9NNMB DDM36W4S1A9NNMBK52 340100101B DCM13W6PNMB DCM13W6PNMBK52 340100101B DAM11W1P1A0NNMB DAM11W1P1A0NNMBK52 340100101B DDM43W2S1A9NNMB DDM43W2S1A9NNMBK52 340100101B DCM17W5PNMB DCM17W5PNMBK52 340100101B DBM9W4P1A0NNMB DBM9W4P1A0NNMBK52 340100101B DDM47W1S1A9NNMB DDM47W1S1A9NNMBK52 340100101B DCM21WA4PNMB DCM21WA4PNMBK52 340100101B DBM13W3P1A0NNMB DBM13W3P1A0NNMBK52 340100101B DEM5W1P1A9NNMB DEM5W1P1A9NNMBK52 340100101B DCM25W3PNMB DCM25W3PNMBK52 340100101B DBM17W2P1A0NNMB DBM17W2P1A0NNMBK52 340100101B DAM7W2P1A9NNMB DAM7W2P1A9NNMBK52 340100101B DCM27W2PNMB DCM27W2PNMBK52 340100101B DBM21W1P1A0NNMB DBM21W1P1A0NNMBK52 340100101B DAM11W1P1A9NNMB DAM11W1P1A9NNMBK52 340100101B DDM24W7PNMB DDM24W7PNMBK52 340100101B DCM13W6P1A0NNMB DCM13W6P1A0NNMBK52 340100101B DBM9W4P1A9NNMB DBM9W4P1A9NNMBK52 340100101B DDM36W4PNMB DDM36W4PNMBK52 340100101B DCM17W5P1A0NNMB DCM17W5P1A0NNMBK52 340100101B DBM13W3P1A9NNMB DBM13W3P1A9NNMBK52 340100101B DDM43W2PNMB DDM43W2PNMBK52 340100101B DCM21WA4P1A0NNMBDCM21WA4P1A0NNMBK52 340100101B DBM17W2P1A9NNMB DBM17W2P1A9NNMBK52 340100101B DDM47W1PNMB DDM47W1PNMBK52 340100101B DCM25W3P1A0NNMB DCM25W3P1A0NNMBK52 340100101B DBM21W1P1A9NNMB DBM21W1P1A9NNMBK52 340100101B DEM5W1SOL3NMB DEM5W1SOL3NMBK52 340100101B DCM27W2P1A0NNMB DCM27W2P1A0NNMBK52 340100101B DCM13W6P1A9NNMB DCM13W6P1A9NNMBK52 340100101B DAM7W2SOL3NMB DAM7W2SOL3NMBK52 340100101B DDM24W7P1A0NNMB DDM24W7P1A0NNMBK52 340100101B DCM17W5P1A9NNMB DCM17W5P1A9NNMBK52 340100101B DAM11W1SOL3NMB DAM11W1SOL3NMBK52 340100101B DDM36W4P1A0NNMB DDM36W4P1A0NNMBK52 340100101B DCM21WA4P1A9NNMBDCM21WA4P1A9NNMBK52 340100101B DBM9W4SOL3NMB DBM9W4SOL3NMBK52 340100101B DDM43W2P1A0NNMB DDM43W2P1A0NNMBK52 340100101B DCM25W3P1A9NNMB DCM25W3P1A9NNMBK52 340100101B DBM13W3SOL3NMB DBM13W3SOL3NMBK52 340100101B DDM47W1P1A0NNMB DDM47W1P1A0NNMBK52 340100101B DCM27W2P1A9NNMB DCM27W2P1A9NNMBK52 340100101B DBM17W2SOL3NMB DBM17W2SOL3NMBK52 340100101B DEM5W1S1A7NNMB DEM5W1S1A7NNMBK52 340100101B DDM24W7P1A9NNMB DDM24W7P1A9NNMBK52 340100101B DBM21W1SOL3NMB DBM21W1SOL3NMBK52 340100101B DAM7W2S1A7NNMB DAM7W2S1A7NNMBK52 340100101B DDM36W4P1A9NNMB DDM36W4P1A9NNMBK52 340100101B DCM13W6SOL3NMB DCM13W6SOL3NMBK52 340100101B DAM11W1S1A7NNMB DAM11W1S1A7NNMBK52 340100101B DDM43W2P1A9NNMB DDM43W2P1A9NNMBK52 340100101B DCM17W5SOL3NMB DCM17W5SOL3NMBK52 340100101B DBM9W4S1A7NNMB DBM9W4S1A7NNMBK52 340100101B DDM47W1P1A9NNMB DDM47W1P1A9NNMBK52 340100101B DCM21WA4SOL3NMB DCM21WA4SOL3NMBK52 340100101B DBM13W3S1A7NNMB DBM13W3S1A7NNMBK52 340100101B DEM5W1SF179ANMB DEM5W1SF179ANMBK52 340100101B DCM25W3SOL3NMB DCM25W3SOL3NMBK52 340100101B DBM17W2S1A7NNMB DBM17W2S1A7NNMBK52 340100101B DAM7W2SF179ANMB DAM7W2SF179ANMBK52 340100101B DCM27W2OL3NMB DCM27W2OL3NMBK52 340100101B DBM21W1S1A7NNMB DBM21W1S1A7NNMBK52 340100101B DAM11W1SF179ANMB DAM11W1SF179ANMBK52 340100101B DDM24W7SOL3NMB DDM24W7SOL3NMBK52 340100101B DCM13W6S1A7NNMB DCM13W6S1A7NNMBK52 340100101B DBM9W4SF179ANMB DBM9W4SF179ANMBK52 340100101B DDM36W4SOL3NMB DDM36W4SOL3NMBK52 340100101B DCM17W5S1A7NNMB DCM17W5S1A7NNMBK52 340100101B DBM13W3SF179ANMB DBM13W3SF179ANMBK52 340100101B DDM43W2SOL3NMB DDM43W2SOL3NMBK52 340100101B DCM21WA4S1A7NNMBDCM21WA4S1A7NNMBK52 340100101B DBM17W2SF179ANMB DBM17W2SF179ANMBK52 340100101B DDM47W1SOL3NMB DDM47W1SOL3NMBK52 340100101B DCM25W3S1A7NNMB DCM25W3S1A7NNMBK52 340100101B DBM21W1SF179ANMB DBM21W1SF179ANMBK52 340100101B DEM5W1POL3NMB DEM5W1POL3NMBK52 340100101B DCM27W2S1A7NNMB DCM27W2S1A7NNMBK52 340100101B DCM13W6SF179ANMB DCM13W6SF179ANMBK52 340100101B DAM3W3POL3NMB DAM3W3POL3NMBK52 340100101B DDM24W7S1A7NNMB DDM24W7S1A7NNMBK52 340100101B DCM17W5SF179ANMB DCM17W5SF179ANMBK52 340100101B DAM7W2POL3NMB DAM7W2POL3NMBK52 340100101B DDM36W4S1A7NNMB DDM36W4S1A7NNMBK52 340100101B DCM21WA4SF179ANMBDCM21WA4SF179ANMBK52 340100101B DAM11W1POL3NMB DAM11W1POL3NMBK52 340100101B DDM43W2S1A7NNMB DDM43W2S1A7NNMBK52 340100101B DCM25W3SF179ANMB DCM25W3SF179ANMBK52 340100101B DBM9W4POL3NMB DBM9W4POL3NMBK52 340100101B DDM47W1S1A7NNMB DDM47W1S1A7NNMBK52 340100101B DCM27W2SF179ANMB DCM27W2SF179ANMBK52 340100101B DBM13W3POL3NMB DBM13W3POL3NMBK52 340100101B DEM5W1P1A7NNMB DEM5W1P1A7NNMBK52 340100101B DDM24W7SF179ANMB DDM24W7SF179ANMBK52 Dimensions are shown in mm (inch) 196 Dimensions subject to change

D Subminiature Space/High Reliability ESA/SCC Cross Reference ESA–SCC ITT Cannon ESA–SCC ITT Cannon ESA–SCC ITT Cannon Part Number Part Number Part Number Part Number Part Number Part Number 340100101B DDM36W4SF179ANMB DDM36W4SF179ANMBK52 340100101B DAM15S1A9NNMB DAM15S1A9NNMBK52 340100415B DM115740-13 340100101B DDM43W2SF179ANMB DDM43W2SF179ANMBK52 340100101B DBM25S1A9NNMB DBM25S1A9NNMBK52 340100419B DM115740-12 340100101B DDM47W1SF179ANMB DDM47W1SF179ANMBK52 340100101B DCM37S1A9NNMB DCM37S1A9NNMBK52 340100412B DM115742-15 340100101B DEM5W1PF179ANMB DEM5W1PF179ANMBK52 340100101B DDM50S1A9NNMB DDM50S1A9NNMBK52 340100416B DM115742-14 340100101B DAM7W2PF179ANMB DAM7W2PF179ANMBK52 340100101B DEM9P1A9NNMB DEM9P1A9NNMBK52 340100420B DM115742-13 340100101B DAM11W1PF179ANMB DAM11W1PF179ANMBK52 340100101B DAM15P1A9NNMB DAM15P1A9NNMBK52 340100413B DM115741-7 340100101B DBM9W4PF179ANMB DBM9W4PF179ANMBK52 340100101B DBM25P1A9NNMB DBM25P1A9NNMBK52 340100417B DM115741-8 340100101B DBM13W3PF179ANMB DBM13W3PF179ANMBK52 340100101B DCM37P1A9NNMB DCM37P1A9NNMBK52 340100414B DM115743-20 340100101B DBM17W2PF179ANMB DBM17W2PF179ANMBK52 340100101B DDM50P1A9NNMB DDM50P1A9NNMBK52 340100418B DM115743-22 340100101B DBM21W1PF179ANMB DBM21W1PF179ANMBK52 340100101B DEM9SF179ANMB DEM9SF179ANMBK52 340102207B DE-59-20 340100101B DCM13W6PF179ANMB DCM13W6PF179ANMBK52 340100101B DAM15SF179ANMB DAM15SF179ANMBK52 340102208B DE-60-20 340100101B DCM17W5PF179ANMB DCM17W5PF179ANMBK52 340100101B DBM25SF179ANMB DBM25SF179ANMBK52 340102209B DA-59-20 340100101B DCM21WA4PF179ANMBDCM21WA4PF179ANMBK52 340100101B DCM37SF179ANMB DCM37SF179ANMBK52 340102210B DA-60-20 340100101B DCM25W3PF179ANMB DCM25W3PF179ANMBK52 340100101B DDM50SF179ANMB DDM50SF179ANMBK52 340102211B DB-59-20 340100101B DCM27W2PF179ANMB DCM27W2PF179ANMBK52 340100101B DEM9PF179ANMB DEM9PF179ANMBK52 340102212B DB-60-20 340100101B DDM24W7PF179ANMB DDM24W7PF179ANMBK52 340100101B DAM15PF179ANMB DAM15PF179ANMBK52 340102213B DC-59-20 340100101B DDM36W4PF179ANMB DDM36W4PF179ANMBK52 340100101B DBM25PF179ANMB DBM25PF179ANMBK52 340102214B DC-60-20 340100101B DDM43W2PF179ANMB DDM43W2PF179ANMBK52 340100101B DCM37PF179ANMB DCM37PF179ANMBK52 340102215B DD-59-20 340100101B DDM47W1PF179ANMB DDM47W1PF179ANMBK52 340100101B DDM50PF179ANMB DDM50PF179ANMBK52 340102216B DD-60-20 340100101B DEM9SNMB DEM9SNMBK52 340100102B DEMA9SNMB DEMA9SNMBK52 340102201B D20418-52 340100101B DAM15SNMB DAM15SNMBK52 340100102B DAMA15SNMB DAMA15SNMBK52 340102206B D115418-70 340100101B DBM25SNMB DBM25SNMBK52 340100102B DBMA25SNMB DBMA25SNMBK52 340102258B D20418-101 340100101B DCM37SNMB DCM37SNMBK52 340100102B DCMA37SNMB DCMA37SNMBK52 340102202B D20419-74 340100101B DDM50SNMB DDM50SNMBK52 340100102B DDMA50SNMB DDMA50SNMBK52 340102203B D20419-48 340100101B DEM9PNMB DEM9PNMBK52 340100102B DEMA9PNMB DEMA9PNMBK52 340102204B D20420-67 340100101B DAM15PNMB DAM15PNMBK52 340100102B DAMA15PNMB DAMA15PNMBK52 340102205B D20420-49 340100101B DBM25PNMB DBM25PNMBK52 340100102B DBMA25PNMB DBMA25PNMBK52 340102244B D20419-73 340100101B DCM37PNMB DCM37PNMBK52 340100102B DCMA37PNMB DCMA37PNMBK52 340102245B D20419-84 340100101B DDM50PNMB DDM50PNMBK52 340100102B DDMA50PNMB DDMA50PNMBK52 340102246B D20420-63 340100101B DEM9SOL3NMB DEM9SOL3NMBK52 340102217B DA19678-174 340102247B D20420-88 340100101B DAM15SOL3NMB DAM15SOL3NMBK52 340102218B DB19678-175 340102225B DA19678-167 340100101B DBM25SOL3NMB DBM25SOL3NMBK52 340102219B DC19678-173 340102226B DB19678-168 340100101B DCM37SOL3NMB DCM37SOL3NMBK52 340102220B DD19678-176 340102227B DC19678-138 340100101B DDM50SOL3NMB DDM50SOL3NMBK52 340102221B DA19678-157 340102228B DD19678-161 340100101B DEM9POL3NMB DEM9POL3NMBK52 340102222B DB19678-171 340102239B DE19977-47 340100101B DAM15POL3NMB DAM15POL3NMBK52 340102223B DC19678-162 340102240B DA19977-40 340100101B DBM25POL3NMB DBM25POL3NMBK52 340102224B DD19678-172 340102241B DB19977-43 340100101B DCM37POL3NMB DCM37POL3NMBK52 340104001B DM115224-1040A 340102242B DC19977-45 340100101B DDM50POL3NMB DDM50POL3NMBK52 340104003B DM115224-1020A 340102243B DD19977-44 340100101B DEM9S1A0NNMB DEM9S1A0NNMBK52 340104005B DM115224-1010A 340102234B DE24657-16 340100101B DAM15S1A0NNMB DAM15S1A0NNMBK52 340104002B DM115224-2040A 340102235B DA24658-15 340100101B DBM25S1A0NNMB DBM25S1A0NNMBK52 340104004B DM115224-2020A 340102236B DB24659-15 340100101B DCM37S1A0NNMB DCM37S1A0NNMBK52 340104006B DM115224-2010A 340102237B DC24660-16 340100101B DDM50S1A0NNMB DDM50S1A0NNMBK52 340104007B DM115224-3040A 340102238B DD24661-13 340100101B DEM9P1A0NNMB DEM9P1A0NNMBK52 340104008B DM115224-4040A 340102229B DE115386-101A 340100101B DAM15P1A0NNMB DAM15P1A0NNMBK52 340104009B DM115224-3020A 340102230B DA115386-104A 340100101B DBM25P1A0NNMB DBM25P1A0NNMBK52 340104010B DM115224-4020A 340102231B DB115386-102A 340100101B DCM37P1A0NNMB DCM37P1A0NNMBK52 340104011B DM115224-3010A 340102232B DC115386-100A 340100101B DDM50P1A0NNMB DDM50P1A0NNMBK52 340104012B DM115224-4010A 340102233B DD115386-103A 340100101B DEM9S1A7NNMB DEM9S1A7NNMBK52 340100401B DM115740-5036 340100501B 030-8882-002 340100101B DAM15S1A7NNMB DAM15S1A7NNMBK52 340100405B DM115740-5046 340100502B 031-8944-000 340100101B DBM25S1A7NNMB DBM25S1A7NNMBK52 340100409B DM115740-5047 340100503B 030-8848-020 340100101B DCM37S1A7NNMB DCM37S1A7NNMBK52 340100402B DM115742-5028 340100504B 031-8787-020 340100101B DDM50S1A7NNMB DDM50S1A7NNMBK52 340100406B DM115742-5039 340100505B 330-8782-001 340100101B DEM9P1A7NNMB DEM9P1A7NNMBK52 340100410B DM115742-5075 340100506B 031-8843-001 340100101B DAM15P1A7NNMB DAM15P1A7NNMBK52 340100403B DM115741-5048 340100507B 330-8944-000 340100101B DBM25P1A7NNMB DBM25P1A7NNMBK52 340100407B DM115741-5032 340100508B 031-8902-000 340100101B DCM37P1A7NNMB DCM37P1A7NNMBK52 340100404B DM115743-5064 340100101B DDM50P1A7NNMB DDM50P1A7NNMBK52 340100408B DM115743-5040 340100101B DEM9S1A9NNMB DEM9S1A9NNMBK52 340100411B DM115740-19 Dimensions are shown in mm (inch) Dimensions subject to change 197

D Subminiature Accessories Selection Guide Locking Hardware Sliding Lock Female Screw Lock Male Screw Lock Retainer Assembly Slide Lock Post Spring Latch Plate Spring Latch Backshell Style see page 209 see page 208 see page 210 see page 211 see page 212 see page 212 EMI Shielded Snap-Together — — — — — — Metalized Plastic Straight Exit see page 200 EMI Shielded Snap-Together — — — — — — Metalized Plastic 40°Exit see page 200 EMI Shielded Die Cast Zinc — (cid:3) — — — — Metal see page 202 Metal Deep Straight (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) Clamp see page 203 Metal Round Cable (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) Clamp see page 203 Metal Short Straight (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) Clamp see page 204 Metal 90°Entry (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) (cid:1) see page 204 Plastic Snap-Together (cid:1) (cid:1) — — — — Universal see page 205 Plastic One-Piece — (cid:3) — — — — Snap-Together see page 205 Plastic One-Piece Plastic — — (cid:1) (cid:1) (cid:1) (cid:1) Straight Exit see page 206 Plastic One-Piece Plastic — — (cid:1) (cid:1) (cid:1) (cid:1) 90°Exit see page 206 Plastic Dataphone — (cid:3) — — — — see page 206 Plastic Quick Disconnect — — — — — — for IDC Cable see page 207 Plastic Quick Disconnect for — — — — — — Round Cable — Straight and 90°Exit see page 207 (cid:3)Supplied with backshell (cid:1)Optional, compatible locking hardware — Not compatible Dimensions are shown in mm (inch) 198 Dimensions subject to change

D Subminiature Accessories Selection Guide Locking Hardware Jackpost for Locking Hook Locking Spring Jackscrew Assembly Jackpost Assembly Recessed Jackscrew Extended Jackscrew Thumbscrew In-Line Connections see page 207 see page 207 see page 213 see page 213 see page 201 see page 201 see page 201 see page 201 — — — — (cid:1) (cid:1) (cid:1) (cid:1) — — — — (cid:1) (cid:1) (cid:1) (cid:1) — — — — — — — — — — — (cid:1) — — — — — — — (cid:1) — — — — — — — (cid:1) — — — — — — — — — — — — — — (cid:1) — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — (cid:1) (cid:1) — — — — — — (cid:1) (cid:1) — — — — — — Dimensions are shown in mm (inch) Dimensions subject to change 199

D Subminiature Accessories EMI Shielded Backshell Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Design includes integral strain relieving cable CABLE clamp. CLAMP CABLE GROUNDING TANG Product Features (cid:1) Improves conformance to FCC DOC #20780 shielding requirements (cid:1) No crimp ferrule tooling needed (cid:1) Quick and simple assembly using snap- together design feature Attenuation Note: Cable grounding tang not available on DE size backshell. Specifications Materials and Finishes Attenuation: −49dB @ 100 MHz Material: Thermoplastic, UL 94V-0 rated Temperature Range: −20°C to 80°C Finish: Nickel over Copper Straight Exit C D ØH MAX E 16,99±0,30 A (.669±.012) B Shell Part A B C D E XH Size Layout Number ±0,15 (.006) ±0,30 (.012) ±0,30 (.012) ±0,30 (.120) ±0,20 (.008) Max. (cid:1) Kit consists of 1front shell, 1rear shell, DE 9 DE121073-154 24,95 (.982) 30,81 (1.213) 23,70 (.933) 16,00 (.630) 35,99 (1.417) 7,32 (.288) 1cable clamp, 2 screws (cid:1) Optional locking hardware sold separately, DA 15 DA121073-150 33,30 (1.311) 39,09 (1.539) 31,80 (1.252) 16,00 (.630) 42,00 (1.654) 8,31 (.327) DB 25 DB121073-151 47,00 (1.850) 53,01 (2.087) 45,01 (1.772) 16,00 (.630) 42,00 (1.654) 10,52 (.414) see page 201. DC 37 DC121073-152 63,45 (2.498) 69,29 (2.728) 60,30 (2.374) 16,00 (.630) 42,00 (1.654) 12,32 (.485) DD 50 DD121073-153 61,10 (2.410) 66,90 (2.634) 58,30 (2.295) 19,00 (.748) 42,00 (1.654) 13,00 (.512) 40°Exit D E Shell Part B C D E Cable Diameter Size Layout Number ±0,30 (.012) ±0,30 (.012) ±0,30 (.012) ±0,20 (.008) Min. Max. DE 9 DE121073-54 35,99 (1.417) 22,00 (.866) 16,00 (.630) 35,99 (1.417) 3,51 (.138) 7,49 (.295) (cid:1) Kit consists of 1front shell, 1rear shell, DA 15 DA121073-50 44,29 (1.744) 27,31 (1.075) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 8,99 (.354) 1cable clamp, 2 screws (cid:1) Optional locking hardware sold separately, DB 25 DB121073-51 57,99 (2.283) 41,00 (1.614) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433) see page 201. DC 37 DC121073-52 74,50 (2.933) 57,51 (2.264) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433) DD 50 DD121073-53 72,97 (2.873) 54,99 (2.165) 19,00 (.748) 42,01 (1.654) 8,99 (.354) 13,00 (.512) Dimensions are shown in mm (inch) 200 Dimensions subject to change

D Subminiature Accessories EMI Shielded Backshell Locking Hardware for Snap-Together EMI Shielded Backshell Recessed Jackscrew Extended Jackscrew Thumbscrew 19,00(.748) 13,50(.531) 4,50 9,00 4,30 9,00 (.177) (.354) #4-40 (.169) (.354) THREADS THREADS Ø 4,50 6,00 6,00 (.177) (.236) Ø 4,10 (.236) MIN (.161) MIN Part Number: 250-8501-004 Part Number: 250-8501-009 (M3) Part Number: 250-8501-013 Material: Brass 250-8501-010 (#4-40) Material: Brass Finish: Nickel Material: Brass Finish: Nickel Quantity Required Finish: Nickel Quantity Required per Connector: 2 Quantity Required per Connector: 2 per Connector: 2 Jackpost for In-Line Connections Jackpost Assembly Rectangular Nut Jackpost 11,00 (.433) 4,90 (.193) 6,00 3,00 (.118) (.236) MIN #4-40 UNC-2B 5,00 #4-40 UNC-2A (.197) (ACROSS FLATS) (cid:1) Assembly consists of 1rectangular nut, 1jackpost, 1#4-40 lock washer. Part Number: D121073-19 Material: Brass Finish: Nickel Quantity Required per Connector: 2 Dimensions are shown in mm (inch) Dimensions subject to change 201

D Subminiature Accessories EMI Shielded Backshell Die Cast Zinc Metal Backshell Straight Exit 9 and 15 Position 25 Position 37 and 50 Position C C C B B B A A D A D D Ø E Ø E Ø E F F F Die cast metal backshells reduce EMI/RFI emissions. Shell Part A B C D XE F Size Layout Number ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) Die cast metal backshells offer improved shielding DE 9 980-2000-345 31,12 (1.225) 37,21 (1.465) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984) in a rugged package. DA 15 980-2000-346 39,12 (1.540) 40,64 (1.600) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312) Product Features DB 25 980-2000-347 53,09 (2.090) 39,37 (1.550) 17,53 (.690) 15,75 (.620) 13,34 (.525) 47,17 (1.857) (cid:1) Improves conformance to FCC DOC #20780 DC 37 980-2000-348 69,34 (2.730) 45,72 (1.800) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500) shielding requirements DD 50 980-2000-349 66,70 (2.626) 45,72 (1.800) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406) (cid:1) No crimp ferrule tooling needed (cid:1) Kit consists of 1front shell, 1rear shell, Specifications Materials and Finishes 2 screws, 2 hex nuts, 2 mounting screws, Attenuation: –50 dB @ 1000 MHz Backshell Material: Zinc 2 end brackets, 1set of compression inserts Temperature Range: –20°C to 80°C Backshell Finish: Clear Zinc (see this page) Compression Inserts: PVC Attenuation Hardware Material: Steel Diecast Shell Shielding Performance Hardware Finish: Clear Zinc 0 -10 -20 -30 db -40 -50 -60 -70 100 1,000 Mhz Compression Inserts (Included With Die Cast Zinc Metal Backshell) Compression inserts accommodate a wide variety of cable sizes. 9 and 15 Position* 25 Position* 37 and 50 Position* 1 Position Cable Diameter 1 9, 15 .190/.350 2 6 2 3 5 3 25 .190/.460 3 37, 50 .300/.680 5 4 2 4 1 4 5 * Inserts may be supplied mirror image #1 #2 #3 #4 #5 #6 Position O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. 9, 15 12,07 (.475) 8,13 (.320) 9,14 (.360) 8,00 (.315) 9,14 (.360) 6,48 (.255) 9,14 (.360) 7,24 (.285) 9,14 (.360) 5,33 (.210) — — 25 15,24 (.600) 11,43 (.450) 11,43 (.450) 10,41 (.410) 11,43 (.450) 9,40 (.370) 11,43 (.450) 7,62 (.300) 11,43 (.450) 5,84 (.230) — — 37, 50 16,64 (.655) 14,48 (.570) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350) Dimensions are shown in mm (inch) 202 Dimensions subject to change

D Subminiature Accessories Metal Backshell Metal Backshell Metal Backshells provide strain relief. Materials and Finishes Various profiles available for different cable routing Backshell Material: Low Carbon Steel requirements. Finish: Yellow Chromate over Product Features Cadmium (cid:1) Qualified to MIL-Spec M85049 Hardware Material: Steel Deep Straight Clamp E 2X Ø 3,45 CABLE (.136) H MAX ENTRY G 0,38 ± ,013 (.015 ± .005) B D MAX C A F CABLE ENTRY (cid:1) Kit consists of 1shell, 2 cable clamps, 2 screws, 2 hex nuts Shell Part Mil Spec A B C D E F G H Size Layout Number Part Number ±0,38 (.015) ±0,572 (.0225) ±0,13 (.005) max. ±0,38 (.015) ±0,38 (.015) ±0,38 (.015) max. DE 9 DE24657 M85049/48-1-1 30,56 (1.203) 12,484 (.4915) 24,99 (.984) 14,68 (.578) 9,53 (.375) 9,53 (.375) 19,05 (.750) 31,75 (1.250) DA 15 DA24658 M85049/48-1-2 38,89 (1.531) 12,484 (.4915) 33,32 (1.312) 14,68 (.578) 18,11 (.713) 7,93 (.312) 19,05 (.750) 31,75 (1.250) DB 25 DB24659 M85049/48-1-3 52,78 (2.078) 12,484 (.4915) 47,04 (1.852) 14,68 (.578) 25,40 (1.000) 7,93 (.312) 25,40 (1.000) 39,70 (1.563) DC 37 DC24660 M85049/48-1-4 69,04 (2.718) 12,484 (.4915) 63,50 (2.500) 14,68 (.578) 34,93 (1.375) 7,93 (.312) 25,40 (1.000) 39,70 (1.563) DD 50 DD24661 M85049/48-1-5 66,68 (2.625) 15,253 (.6005) 61,11 (2.406) 17,45 (.687) 35,71 (1.406) 10,31 (.406) 28,57 (1.125) 42,88 (1.688) Round Cable Clamp A 2X Ø 3,05 C (.120) E G F Ø D MAX B CABLE ENTRY 0,38 ± 0,13 (.015 ± .005) (cid:1) Kit consists of 1shell, 2 screws, 2 hex nuts Shell Part Mil Spec A B C XD E F G Size Layout Number Part Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) max. ±0,38 (.015) ±0,38 (.015) ±0,76 (.030) DE 9 DE44994 M85049/48-2-1 30,68 (1.208) 12,70 (.500) 24,99 (.984) 10,31 (.406) 16,79 (.661) 3,18 (.125) 26,18 (1.031) DA 15 DA20961 M85049/48-2-2 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 10,31 (.406) 24,99 (.984) 3,18 (.125) 26,18 (1.031) DB 25 DB20962 M85049/48-2-3 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 15,06 (.593) 38,48 (1.515) 4,75 (.187) 26,98 (1.062) DC 37 DC20963 M85049/48-2-4 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 18,23 (.718) 55,14 (2.171) 6,35 (.250) 26,98 (1.062) DD 50 DD20964 M85049/48-2-5 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 20,62 (.812) 53,16 (2.093) 7,92 (.312) 26,98 (1.062) Dimensions are shown in mm (inch) Dimensions subject to change 203

D Subminiature Accessories Metal Backshell Short Straight Clamp 2X Ø 3,05 A (.120) G C 12,30 ± 0,38 (.484 ± .015) B 0,38 ± 0,13 F (.015 ± .005) (cid:1) Kit consists of 1shell, 2 or 3 screws, E CABLE 2 or 3 hex nuts ENTRY No. of Shell Part Mil Spec Cable Locking A B C E F G Size Layout Number Part Number Screws Included ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,38 (.015) ±0,89 (.035) DA 15 DA19678-1 M85049/48-3-2 2 38,88 (1.531) 12,70 (.500) 33,33 (1.312) 7,51 (.296) 7,93 (.312) 16,36 (.644) DB 25 DB19678-2 M85049/48-3-3 2 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 7,51 (.296) 20,22 (.796) 16,36 (.644) DC 37 DC19678-3 M85049/48-3-4 3 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,51 (.296) 17,45 (.687) 16,36 (.644) DD 50 DD19678-4 M85049/48-3-5 3 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 9,91 (.390) 17,45 (.687) 17,63 (.694) DE-9 is not available. 90°Entry 2X MOUNTING HOLES E #4-40 UNC-2B THD CABLE ENTRY A B 2,77± 0,25 (cid:1) Kit consists of 1shell, 1cable clamp, 1screw, (.109± .010) F CABLE 1nut, 2 rivnuts (assembled) C G ENTRY H Shell Part Mil Spec A B C E F G H Size Layout Number Part Number ±0,38 (.015) ±0,76 (.030) ±0,13 (.005) ±0,76 (.030) ±0,76 (.030) ±0,76 (.030) ±0,76 (.030) DE 9 DE19977-5 M85049/50-1 30,56 (1.203) 18,24 (.718) 24,99 (.984) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281) DA 15 DA19977-1 M85049/50-2 38,89 (1.531) 18,24 (.718) 33,33 (1.312) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281) DB 25 DB19977-2 M85049/50-3 52,78 (2.078) 24,58 (.968) 47,04 (1.852) 11,10 (.437) 15,88 (.625) 11,89 (.468) 7,14 (.281) DC 37 DC19977-3 M85049/50-4 69,04 (2.718) 30,15 (1.187) 63,50 (2.500) 11,10 (.437) 20,63 (.812) 11,89 (.468) 7,14 (.281) DD 50 DD19977-4 M85049/50-5 66,68 (2.625) 31,75 (1.250) 61,11 (2.406) 14,28 (.562) 23,01 (.906) 13,49 (.531) 8,71 (.343) Dimensions are shown in mm (inch) 204 Dimensions subject to change

D Subminiature Accessories Plastic Backshell Plastic Backshell Snap-Together Universal Ø B MAX CABLE ENTRY 42,50 39,50 (1.673) C (1.555) D (cid:1) A 2-piece snap-together design for quick assembly (cid:1) Customer furnishes tie-wrap Shell Part XB C D Materials and Finishes Size Layout Number max. ±0,20 (.008) ±0,20 (.008) DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768) Material: Black Thermoplastic, DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094) UL 94V-0 rated DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638) DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 57,99 (2.283) DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060) One-Piece Snap-Together A C 48,00 16,21 E (1.890) (.638) CLAMP, THERMOPLASTIC CLAMP, METAL Ø D MAX CABLE ENTRY (cid:1) Low cost (cid:1) Easy to assemble Shell Part XD (cid:1) Mounting hardware included Size Layout Number A C max. E (cid:1) 2 thumbscrews, 2 cable clamps DE 9 DEBS-9 35,20 (1.386) 24,99 (.984) 5,69 (.224) 27,51 (1.083) DA 15 DABS-15 43,31 (1.705) 33,33 (1.312) 5,69 (.224) 31,19 (1.228) Materials and Finishes DB 25 DBBS-25 57,20 (2.252) 47,04 (1.852) 6,50 (.256) 38,30 (1.508) Backshell Material: Polypropylene DC-37 and DD-50 are not available. Hardware Material:Steel Hardware Finish: Yellow chromate over zinc Dimensions are shown in mm (inch) Dimensions subject to change 205

D Subminiature Accessories Plastic Backshell One-Piece Plastic Straight Exit G CABLE B ENTRY Ø E C A CABLE (cid:1) Kit consists of 1shell, 1cable clamp, ENTRY F 1set screw CABLE (cid:1) Mounting hardware included ENTRY (cid:1) 2 screws #4-24 x 5/16 long self-tapping D (cid:1) Accommodates spring latches Shell Part A B C D XE F G Materials and Finishes Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) Backshell Material: Black Thermoplastic, DE 9 DE51218 30,94 (1.218) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281) — — UL 94V-2 rated DA 15 DA51210 39,27 (1.546) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360) — — DB 25 DB51212 53,16 (2.093) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) — 12,52 (.493) 9,15 (.360) Hardware Material: Steel DC 37 DC51214 69,44 (2.734) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) — 17,63 (.694) 9,15 (.360) Hardware Finish: Yellow Chromate over DD 50 DD51216 67,06 (2.640) 38,10 (1.500) 61,11 (2.406) 15,47 (.609) — 18,64 (.734) 11,89 (.468) Cadmium or Zinc 90°Exit K CABLE ENTRY Ø H A CABLE ENTRY B J CABLE (cid:1) Kit consists of 1shell, 1cable clamp, ENTRY 1set screw C (cid:1) Mounting hardware included D (cid:1) 2 screws #4-24 x 5/16 long self-tapping Materials and Finishes Shell Part A B C D XH J K Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010) Backshell Material: Black Thermoplastic, DE 9 DE51219 37,95 (1.494) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281) — — UL 94V-2 rated DA 15 DA51211 46,28 (1.822) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360) — — Hardware Material: Steel DB 25 DB51213 60,15 (2.368) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) — 12,52 (.493) 9,15 (.360) Hardware Finish: Yellow Chromate over DC 37 DC51215 76,43 (3.009) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) — 17,63 (.694) 9,15 (.360) Cadmium or Zinc DD 50 DD51217 74,04 (2.915) 38,10 (1.500) 61,11 (2.406) 15,47 (.609) — 18,64 (.734) 11,89 (.468) Dataphone 56,34 - 55,55 (2.218 - 2.187) 20,22 - 19,43 45,72 - 45,21 (.796 - .765) (1.800 - 1.780) 36,09 - 35,31 (1.421 - 1.390) 11,18 - 10,41 (cid:1) Available in 25 position only (.440 - .410) (cid:1) Mounting hardware included 3,81 - 3,56 (cid:1) 2 screws #4-40 x 11/16 long (.150 - .140) 47,04(1.852) # 4-40THREADS Materials and Finishes Shell Part Max. Cable Backshell Material: Black Thermoplastic, Size Layout Number Entry UL 94V-0 rated DB 25 DB51226-1B 7,92 (.312) Hardware Material: Steel Hardware Finish: Clear Chromate over Cadmium or Zinc Dimensions are shown in mm (inch) 206 Dimensions subject to change

D Subminiature Accessories Plastic Backshell Quick Disconnect for IDC Cable IDC E CABLE ENTRY 2,60 ± 0,20 (.102 ± .008) LOCKING 40,54 SPRING* (1.596) C LOCKING (1.664,321) (cid:1) Kit consists of 1front shell, 1rear shell, A HOOK* 2 strain reliefs, 5 screws * Order optional locking hardware separately. Materials and Finishes Shell Part A C E Size Layout Number max. ±0,13 (.005) ±0,20 (.008) Material: Black Thermoplastic, DE 9 DE115386-1B 40,69 (1.602) 24,99 (.984) 14,99 (.590) UL 94V-0 rated DA 15 DA115386-2B 49,00 (1.929) 33,30 (1.311) 23,29 (.917) DB 25 DB115386-3B 62,69 (2.468) 47,04 (1.852) 36,98 (1.456) DC 37 DC115386-4B 79,20 (3.118) 63,50 (2.500) 53,49 (2.106) Quick Disconnect for Round Cable Straight and 90°Exit E LOCKING 13,00 (.512) CABLE SPRING* MAX ENTRY MIN B 16,10 (.634) MAX MAX F CABLE ENTRY 7,00 (.276) MAX C MIN D MAX A LOCKING MAX HOOK* (cid:1) Kit consists of 1front shell, 1rear shell, * Order optional locking hardware separately. 1cable clamp, 1spacer, 4 self-tapping Shell Part A B C D E F screws, 2 machined screws Size Layout Number max. max. ±0,15 (.006) max. min. min. DE 9 DE115339 41,33 (1.627) 32,41 (1.276) 25,00 (.984) 16,51 (.650) 7,70 (.303) 6,70 (.264) Materials and Finishes DA 15 DA115339-1 49,63 (1.954) 32,41 (1.276) 33,30 (1.311) 16,51 (.650) 7,70 (.303) 6,70 (.264) Material: Black Thermoplastic, DB 25 DB115339-2 63,65 (2.506) 40,44 (1.592) 47,04 (1.852) 16,51 (.650) 7,70 (.303) 17,70 (.697) UL 94V-0 rated DC 37 DC115339-3 79,86 (3.144) 42,42 (1.670) 63,50 (2.500) 16,51 (.650) 7,70 (.303) 17,70 (.697) DD 50 DD115339-4 77,57 (3.054) 42,42 (1.670) 61,10 (2.406) 19,51 (.768) 10,69 (.421) 17,70 (.697) Optional Locking Hardware/Mechanism Optional hardware provides quick disconnect for Locking Hook Locking Spring either flat IDC cable or round jacketed cable. (cid:1) Order 2 per connector Material: Corrosion-resistant steel Lock Hook Lock Spring Part Number Part Number 015-8755-000 259-8760-000 015-8755-001 NOTE: Not for use on rear panel mounted connectors. Dimensions are shown in mm (inch) Dimensions subject to change 207

D Subminiature Accessories Locking Hardware Screw Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Front Panel Mount Rear Panel Mount Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon backshells. D SUBMINIATURE CONNECTOR SCREW PIN OR SOCKET Product Features (cid:1) Ensures positive mating CWLITIPH (cid:1) Provides locking and latching for high THD vibration applications MOUNTING NUT PANEL WASHER DP SINUC BOOMRNI NNSIEOACTCUTKORERET LWOACSKHER HEX NUT Male Screw Lock A SCREW #4-40 UNC-2A THD B C CLIP GAP CLIP (cid:1) Kit consists of 1screw and 1clip Part A B C (cid:1) Order 2 per connector Shell Size Number ±0,38 (.015) ±0,25 (.010) ±0,13 (.005) DE, DA, DB, DC D20419 14,10 (.555) 6,35 (.250) 1,22 (.048) Material: Steel DE, DA, DB, DC D20419-18 14,10 (.555) 7,14 (.281) 1,70 (.067) Finish: Yellow Chromate over DE, DA, DB, DC D20419-21 14,10 (.555) 7,14 (.281) 2,34 (.092) Cadmium or Zinc DE, DA, DB, DC D20419-104 14,10 (.555) 7,92 (.312) 2,34 (.092) DD D20420 16,66 (.656) 6,35 (.250) 1,22 (.048) DD D20420-13 16,66 (.656) 7,14 (.281) 1,70 (.067) DD D20420-15 16,66 (.656) 7,14 (.281) 2,34 (.092) DD D20420-86 16,66 (.656) 7,92 (.312) 2,34 (.092) Dimensions are shown in mm (inch) 208 Dimensions subject to change

D Subminiature Accessories Locking Hardware Female Screw Lock Front Panel Mount Rear Panel Mount 6,35 (.250)APPROX REMOVE ONE WASHER 4,78± 0,38 #4-40 UNC-2BTHD FOR EACH 0,76 (.030) (.188± .015) OF PANELTHICKNESS HEX WHEN REAR MOUNTING (ACROSS FLATS) 1,52 (.060) MAX PANEL 4,78± 0,38 (.188± .015) A REAR FLANGE (REF) #4-40UNC-2ATHD (cid:1) Kit consists of 1nut, 3 washers, 1lock NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw washer, 1hex nut lock assemblies. (cid:1) Order 2 per connector (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Yellow Chromate Mil Spec Zinc With A Material: Steel over Cadmium Part Number Clear Chromate ±0,38 (.015) D20418-2 M24308/26-1 D20418-80 7,92 (.312) D20418-50 — — 12,70 (.500) D20418-39 M24308/26-2 — 15,88 (.625) D20418-74 — — 19,05 (.750) Female Screw Lock for High Volume Applications 3,80 (.150) MIN FULL THD 5,36 3,02 Ø(.211) Ø(.119) 1,70 6,35 (cid:1) Order 2 per connector Ø (.119) (.067) (cid:1) Tool required for installation. See page 211. NOM (6.2,4585 -- 6.2,3408) 7,82± 0,13 (.308± .005) Material: Steel Finish: Zinc NOTE: Not suitable for rear panel mounting. Part Thread Number Code Nominal Panel Thickness 980-2000-858 #4-40 1,09 – 0,91 (.043 – .036) 980-2000-859 M3 1,09 – 0,91 (.043 – .036) Screw Locks for Connectors with Integral Jackpost 3,50 Threaded Inserts (.138) 5,00 (.197) HEX THD A MIN THD B (ACROSS FLATS) 4,50 (.177) 5,75 5,50 MIN (.226) (.217) Part Thread Code Number THD A THD B D121073-39 #4-40 UNC-2B #4-40 UNC-2A D121073-40 M3 #4-40 UNC-2A D121073-41 #4-40 UNC-2B M3 D121073-42 M3 M3 (cid:1) Kit consists of 1jackpost, 1lock washer (cid:1) Order 2 per connector Material: Brass Finish: Nickel Dimensions are shown in mm (inch) Dimensions subject to change 209

D Subminiature Accessories Locking Hardware Slide Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with #4-40 ITT Cannon backshells. NUT, HEX Product Features (cid:1) Ensures positive mating (cid:1) Provides locking and latching for high WASHER, LOCK vibration applications PLATE, SLIDING LOCK MOUNTING SCREW #4-40 WASHER #4-40 POST WASHER, LOCK NUT, HEX Sliding Lock Retainer Assembly , , , 2,36 (.093) A TRAVEL REF C (cid:1) Ideal for Ethernet Applications B (cid:1) Kit consists of 1sliding lock plate, 2 mounting screws, 2 lock washers, 2 hex nuts (cid:1) Order 1kit per connector Finish/ Shell Part A B C Description Material Treatment Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) DE 9 DE51224-1 35,05 (1.380) 12,70 (.500) 25,00 (.984) Sliding Lock DA 15 DA51220-1* 43,70 (1.720) 12,70 (.500) 33,32 (1.312) Plate Stainless Steel Passivated DB 25 DB51221-1 57,40 (2.260) 12,70 (.500) 47,04 (1.852) Screw, Yellow DC 37 DC51222-1 73,86 (2.908) 12,70 (.500) 63,50 (2.500) Mounting Steel Chromate Over DD 50 DD51223-1 71,47 (2.814) 15,47 (.609) 61,11 (2.406) Washer, Lock Cadmium or Nut, Hex Zinc * Meets IEEE 802.3 Ethernet Specification Dimensions are shown in mm (inch) 210 Dimensions subject to change

D Subminiature Accessories Locking Hardware Slide Lock Post Assemblies WASHER WASHER, LOCK POST #4-40 NUT, HEX (cid:1) Kit consists of 1post, 2 washers, 1lock washer, 1hex nut (cid:1) Order 2 kits per connector 4,60 (.180) HEX (ACROSS FLATS) Part Number: D53018 2,59 ± 0,13 Materials and Finishes (.102 ± .005) 10,57 ± 0,25 Material: Steel (.416 ± .010) Finish: Yellow Chromate over Cadmium or Zinc NOTE: When rear-mounting connector to a 1/16(cid:4)panel, delete the 2 washers. Slide Lock Post for High Volume Applications Ø(4.1,1788±± .00,0038) Ø(3.1,6433±± 0.0,0083) Ø3,0M2(A.1X19) Ø(2.0,4946±± 0.0,0083) (cid:1) Order 2 per connector (cid:1) Tool required for installation. See this page. 1,85(.073) MAX Part Number: 980-2000-860 Ø 5,54(.218) 1,52 (.060) 4,37± 0,13 Panel Thickness: 1,09-0,91 (.043-.036) MAX (.172± .005) Materials and Finishes Material: Stainless Steel Treatment: Passivated NOTE: Not suitable for rear panel mounting Tool for High Volume Applications Part Number: 995-2000-092 Dimensions are shown in mm (inch) Dimensions subject to change 211

D Subminiature Accessories Locking Hardware Spring Latch Assemblies ITT Cannon offers the largest variety of locking and Unlocked Locked latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon Connectors. Product Features (cid:1) Low Cost (cid:1) Minimizes field connection time (cid:1) Positive lock between connectors (cid:1) Packaged 2 kits per bag Materials and Finishes Material: Stainless Steel Treatment: Passivated Spring Latch Plate Assembly #4-40 SCREW #4-40THD x 7,92 (.312) SCREW 2,41 - 1,52 (.095 - .060) PLATE, LATCH PLATE, LATCH CONNECTOR, #4-40 NUT, HEX EITHER PIN OR SOCKET Shell Part A B Size Layout Number ±0,38 (.015) ±0,38 (.015) DE, DA, DB, DC 9, 15, 25, 37 D110278 12,42 (.489) 14,35 (.565) WASHER, LOCK DD 50 D110280 15,47 (.609) 17,09 (.673) #4-40 NUT, HEX (cid:1) Kit consists of 1plate, 1screw, 1lock washer, 1hex nut (cid:1) Order 2 kits per connector Spring Latch Assembly LATCH, SPRING 15,57± 0,64 LATCH, SPRING #4-40 (.613± .025) SCREW #4-40 THD x 7,92 (.312) SCREW B A C SPRING LATCH *2,41 - 1,52 MOUNTING BRACKET (.095 - .060) #4-40 NUT, HEX SPRING LATCH CONNECTOR, MOUNTING PLATE EITHER PIN OR SOCKET * Dimension does not apply to rear panel mounting. Shell Part A B C Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,51 (.020) DE, DA, DB, DC 9, 15, 25, 37 D110277 12,42 (.489) 14,35 (.565) 18,59 (.732) WASHER, LOCK DD 50 D110279 15,49 (.609) 17,09 (.673) 18,59 (.732) #4-40 NUT, HEX (cid:1) Kit consists of 1spring, 1screw, 1bracket, 1lock washer, 1hex nut (cid:1) Order 2 kits per connector (cid:1) Front panel mounting Dimensions are shown in mm (inch) 212 Dimensions subject to change

D Subminiature Accessories Locking Hardware Jackscrew/Jackpost Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories Jackpost Assembly Jackscrew Assembly selection guide on pages 198-199 for use with HEAD, ITT Cannon Connectors. JACKSCREW #2-56UNCTHD #4-40 UNC THD #4-40 UNC-2B THD #4-40 UNC-2A THD RETAINING COMPOUND WASHER, #4 LOCK Ø 3,05 (.120) #4 HEX NUT STUD, JACKSCREW FEMALE POST Ø 3,05 (.120) Jackscrew Assembly Ø 5,59 (.220) MAX 0,89 ± 0,13 (.035 ± .005) CONNECTOR ASSEMBLY (cid:1) Kit consists of 2 studs, 2 heads, 1tube 9,40 (.370) retaining compound MAX (cid:1) Order one kit per connector 16,26 (.640) MAX Part Number: D110550 Materials and Finishes Material: Stainless Steel 0,64 ± 0,13 #4-40 UNC (.025 ± .005) THREAD 1,73 (.068) Ø 5,59 (.220) MAX MAX 4,57 (.180) MAX Jackpost Assembly 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR #4-40 UNC THREAD ASSEMBLY 5,84 ± 0,13 (cid:1) Kit consists of 2 posts, 2 hex nuts, 2 lock (.230 ± .005) 14,10 ± 0,13 washers (.555 ± .005) (cid:1) Order one kit per connector 1,14 ± 0,13 (.045 ± .005) Part Number: D110551 5,59 (.220) MIN PANEL 3,18 (.125) PERFECT THD MAX Materials and Finishes Material: Stainless Steel #4-40 UNC THREAD Treatment: Passivated NOTE: Jackpost is not compatible with rear-panel mount connectors. Dimensions are shown in mm (inch) Dimensions subject to change 213

D Subminiature Accessories Guide Pin Plate Guide Pin Plate Female 9,60 (.378) MAX MOUNTING PANEL (cid:1) Useful in blind mate applications. (cid:1) Kit consists of 1plate, 2 screws 1,57 (cid:1) Guide pin inserts for Size 8 cavities for (.062) 6,35 (.250) MAX Combo Dconnectors also available. See SOLDER POT page 95. EXTENSION Plate and Hardware Material: Steel Plate and Hardware Finish: Yellow Chromate over Zinc or Cadmium Shell Part A B C D E F G H J K Size Layout Number ±0,41 (.016) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016) DE 9 DE111920 49,61 (1.953) 40,08 (1.578) 25,00 (.986) 18,65 (.734) 15,27 (.601) 9,52 (.375) 25,40 (1.000) 30,58 (1.204) 12,29 (.484) 6,15 (.242) DA 15 DA22214 57,96 (2.282) 48,41 (1.906) 33,32 (1.312) 22,81 (.898) 19,43 (.765) 9,52 (.375) 25,40 (1.000) 38,91 (1.532) 12,29 (.484) 6,15 (.242) DB 25 DB22254 71,63 (2.820) 62,13 (2.446) 47,04 (1.852) 29,67 (1.168) 26,29 (1.035) 9,52 (.375) 25,40 (1.000) 51,21 (2.016) 11,91 (.469) 5,94 (.234) DC 37 DC22071 88,11 (3.469) 78,59 (3.094) 63,50 (2.500) 37,90 (1.492) 34,52 (1.359) 9,52 (.375) 25,40 (1.000) 67,49 (2.657) 11,91 (.469) 5,94 (.234) DD 50 DD21961 85,72 (3.375) 76,20 (3.000) 61,11 (2.406) 36,50 (1.437) 33,32 (1.312) 11,10 (.437) 28,58 (1.125) 65,10 (2.563) 14,30 (.563) 7,16 (.282) Recommended Panel Cutout 2X Ø 4,22± 0,05 B (.166 .002) 2X R K E 2X Ø 3,66 0,13 (.144 .005) F F J D H Dimensions are shown in mm (inch) 214 Dimensions subject to change

D Subminiature Accessories Guide Pin Plate Guide Pin Plate Male A 4,78 ± 0,30 (.188 ± .012) B 6,35 (.250) MAX C SOLDER POT EXTENSION 1,57 (.062) D 2X Ø 3,66 ± 0,13 MAX (.144 ± .005) (cid:1) Useful in blind mate applications. ITT CANNON (cid:1) Kit consists of 1plate, 2 sems screws, Ø 4,M01A (X.158) Ø 4,06 (.160) F E 2rivets, 2 guide pins, 2 washers REF MAX (cid:1) Guide pin inserts for Size 8 cavities for 1,57 ± 0,13 Combo Dconnectors also available. See (.062 ± .005) 8,71 ± 0,38 page 95. (.343 ± .015) 22,22 ± 0,76 G (.875 ± .030) Plate and Hardware Material: Steel (4.1,0660 ±± 0.0,2150) 2#X4 M-4O0 UUNNTCIN-2GB HTOHDLE Plate and Yellow Chromate over Hardware Finish: Zinc or Cadmium Guide Pin Material: Stainless Steel Shell Part A B C D E F G H J K Size Layout Number ±0,38 (.015) ±0,13 (.005) ±0.25 (.010) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0.13 (.005) ±0.25 (.010) ±0.38 (.015) ±0,13 (.005) DE 9 DE111919 49,61 (1.953) 40,08 (1.578) 33,91 (1.335) 18,65 (.734) 25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484) 30,58 (1.204) 6,15 (.242) DA 16 DA22213 57,94 (2.281) 48,41 (1.906) 42,24 (1.663) 22,81 (.898) 25,40 (1.000) 19,05 (.750) 33,32 (1.312) 12,29 (.484) 38,89 (1.531) 6,15 (.242) DB 25 DB22255 71,63 (2.820) 62,13 (2.446) 55,96 (2.203) 29,67 (1.168) 25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484) 51,99 (2.047) 6,15 (.242) DC 37 DC22070 88,09 (3.468) 78,42 (3.094) 72,42 (2.851) 37,90 (1.492) 25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484) 68,25 (2.687) 6,15 (.242) DD 50 DD21962 85,72 (3.375) 76,20 (3.000) 69,82 (2.749) 36,50 (1.437) 28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593) 66,93 (2.635) 7,52 (.296) Recommended Panel Cutout B C 2X RK D 2X Ø 3,66± 0,13 F H (.144± .005) 2X Ø 5,54± 0,13 (.218± .005) J Dimensions are shown in mm (inch) Dimensions subject to change 215

D Subminiature Accessories Connector Saver Connector Saver Connector Saver Engaging Face, Pin Side A 21,95 ± 0,51 B 5,97 ± 0,25 (.864 ± .020) 6,17 ± 0,25 C (.235 ± .010) (.243 ± .010) INSULATOR ASSY SOCKET 2X 10° CONTACT SHELL, Connector Savers are used to minimize wear on SOCKET FRONT cable or panel connectors. SPHINE FLRL,ONT SPACER Note: Hardware removed for clarity. Shell Part A B C Size Layout Numbers ±0,40 (.015) ±0,25 (.010) ±0,25 (.010) DE 9 DEBU111515 30,81 (1.213) 24,99 (.984) 16,92 (.666) DA 15 DABU111512 39,14 (1.541) 33,32 (1.312) 25,25 (.994) DB 25 DBBU111511 53,04 (2.088) 47,04 (1.852) 38,96 (1.534) Note: DC-37 and DD-50 not available. Specifications Temperature: −55°C to 105°C Current Rating: 7 A Dielectric Withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Material Finish Shells Steel Tin/Lead Insulator Black Thermoplastic, UL 94V-0 — Contacts Copper Alloy Gold Over Nickel Spacer Zinc Alloy — Locking Hardware Steel Clear Chromate Over Zinc Dimensions are shown in mm (inch) 216 Dimensions subject to change

D Subminiature Accessories Gender Changer Gender Changer Male/Male Pin A (1.547,510±± . 002,654) 2X(.1Ø335,)43 CB (.83,2396±± 0.0,1035) (5.2,3804±± .00,0165) (5.2,3804±± .00,0165) 12,55± 0,38 (.494± .015) CONTACT PIN FRONT SHELL Galelonwde cro Cnhnaencgtoerrss omf tohdei fsya tmhee mgeantdinegr si ntote rmfaactee .to PFRINO 1NT PRSIIENDA E1R 2X 10° RIVET FRONT SHELL SIDE INSULATOR–PC BOARD Product Features Note: Grounding dimples available on male/male only. (cid:1) Low cost way to correct design errors Shell Part Number Part Number A B C (cid:1) Optional hardware allows design flexibility Size Layout Without Hardware With Hardware ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) DE 9 DE111805-1 DE111805-5 30,81 (1.213) 24,99 (.984) 16,92 (.666) DA 15 DA111806-1 DA111806-5 39,14 (1.541) 33,32 (1.312) 25,25 (.994) DB 25 DB111807-1 DB111807-5 53,04 (2.088) 47,04 (1.852) 38,96 (1.534) DC 37 DC111808-1 DC111808-5 69,32 (2.729) 63,50 (2.500) 55,42 (2.182) Note: DD-50 not available in male/male. Female/Female A Socket 13,11± 0,51 B 6,17± 0,13 (.516± .020) (.243± .005) C FRONT 6,17± 0,13 SHELL (.243± .005) INSULATOR 12,55± 0,38 7,90± 0,13 (.494± .015) (.311± .005) SOCKET CONTACT 2X Ø 3,05 INSULATOR 2X 10° (.120) 0,76± 0,26 Gender Changers modify the mating interface to (.030± .010) FRONT SHELL allow connectors of the same genders to mate. Shell Part Number Part Number A B C Product Features Size Layout Without Hardware With Hardware ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) (cid:1) Low cost way to correct design errors DE 9 DE111813 DE111813-3 30,81 (1.213) 24,99 (.984) 16,33 (.643) (cid:1) Optional hardware allows design flexibility DA 15 DA111810 DA111810-3 39,14 (1.541) 33,32 (1.312) 24,66 (.971) DB 25 DB111811 DB111811-2 53,04 (2.088) 47,04 (1.852) 38,38 (1.511) Note: DC-37 and DD-50 not available for female/female. Specifications Temperature: −55°C to 105°C Current Rating: 3 A Dielectric Withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Material Finish Shells Steel Tin/Lead M/M Glass Epoxy — Insulator F/F Black Thermoplastic, UL 94V-0 — Contacts Copper Alloy Gold Over Nickel Rivets (M/M) Copper Alloy Tin/Lead Clear Chromate Over Locking Hardware Steel Cadmium or Zinc and Mylar Dimensions are shown in mm (inch) Dimensions subject to change 217

D Subminiature Accessories Miscellaneous Dust Cap RAISED GATE MARK 6,35 (.250) A ITT CANNON B D XX-XX-XX 1,02 WALL Dust caps provide protection from moisture and (.040) C dust for unused I/O ports. Product Features (cid:1) Conductive Dust Caps provide a surface NOTE: C dim. applies at point of maximum integral interface length. resistivity of at least 1x 105ohms/sq Part Number I.D. A B C D (cid:1) Dust Caps meet the static decay test DE-59-20 Socket 20,32 (.800) 11,43 (.450) 16,36 (.644) 7,59 (.299) requirements of MIL-B-81705C, Type II. DA-59-20 Socket 28,45 (1.120) 11,68 (.460) 24,59 (.968) 7,62 (.300) (cid:1) Dust Caps have an integral flange for easy DB-59-20 Socket 42,42 (1.670) 11,68 (.460) 38,25 (1.506) 7,49 (.295) application and removal. DC-59-20 Socket 58,93 (2.320) 11,68 (.460) 54,81 (2.158) 7,37 (.290) Materials and Finishes DD-59-20 Socket 56,90 (2.240) 14,48 (.570) 53,11 (2.091) 10,41 (.410) Material: Black Polyethylene DE-60-20 Pin 21,84 (.860) 12,95 (.510) 17,78 (.700) 8,92 (.351) DA-60-20 Pin 30,48 (1.200) 12,95 (.510) 26,52 (1.044) 9,02 (.355) DB-60-20 Pin 44,20 (1.740) 13,46 (.530) 39,60 (1.559) 9,09 (.358) DC-60-20 Pin 60,71 (2.390) 13,46 (.530) 56,90 (2.240) 9,37 (.369) DD-60-20 Pin 58,17 (2.290) 16,00 (.630) 54,28 (2.137) 12,04 (.474) Interfacial Seal 2X 10° Interfacial seals provide moisture resistance at the mating interface. Product Features (cid:1) Other Interfacial Seals in the Combo D layouts are available upon request. Shell Size Layout Part Number A B Materials and Finishes DE 9 DE53750 16,66 (.656) 8,41 (.331) Material: Silastic Sheet DA 15 DA53750-1 24,99 (.984) 8,41 (.331) DB 25 DB53750-2 38,88 (1.531) 8,41 (.331) DC 37 DC53750-3 55,14 (2.171) 8,41 (.331) DD 50 DD53750-4 52,78 (2.078) 11,10 (.437) DC 21WA4 075-0354-003 55,14 (2.171) 8,41 (.331) Potting Shell 4,70 (.185) 15,20 (.600) 2X Ø 3,25 (.128) 0,76 (.030) Potting shells are molded with a thin flange Shell Part 0,76 (.030) to permit the use of D Subminiature Size Layout Number locking devices. DE 9 DE50904-1 Potting shells hold epoxy in place during curing. DA 15 DA50905-1 Materials and Finishes DB 25 DB50906-1 DC 37 DC50907-1 Material: Nylon DD 50 DD50908-1 Color: Natural (white) Dimensions are shown in mm (inch) 218 Dimensions subject to change

D Subminiature Selection Index Page Reader’s Resource Dimensional Reference Data Panel Mounting.......................................................220 Panel Cutouts ........................................................221 Contact Cavity Arrangements Combo D— Plug ....................................................222 Combo D— Receptacle ...............................................223 Standard — Plug and Receptacle .........................................224 Pushfit/Boardlock — Standard and European.................................225 Alternate Technical Configurations 50 Ohm Coaxial Contact — Straight and 90°.................................225 Bracket — Standard and European ........................................226 Hardware Views Standard............................................................226 European............................................................227 Printed Circuit Board (PCB) Hole Patterns Combination Layouts Coaxial 90°— Standard Plug............................................................228 Receptacle.......................................................231 Coaxial 90°— European Plug............................................................234 Receptacle.......................................................236 Coaxial Straight — Standard/European Plug............................................................238 Receptacle.......................................................241 High Power 90°— Standard Plug............................................................244 Receptacle.......................................................247 High Power 90°— European Plug............................................................250 Receptacle.......................................................252 High Power/High Voltage Straight — Standard/European Plug............................................................254 Receptacle.......................................................257 90°PC Tails (Size 20 Signal Contacts only) — European R Plug............................................................260 Receptacle.......................................................263 e Straight PC Tails (Size 20 Signal Contacts only) — Standard/European a Plug............................................................266 d Receptacle.......................................................269 e Standard Layouts r 90°Standard — Plug and Receptacle ....................................272 ’ 90°European — Plug and Receptacle....................................273 s Straight PC Tails — Plug and Receptacle Standard/European...................274 R Lease Tooling .........................................................275 e Glossary of Terms......................................................276 s Obsolete Products/Available Products Not Previously Listed .....................282 o u Part Number Index......................................................283 r Product Safety and Warranty..............................................297 c e Dimensions are shown in mm (inch) Dimensions subject to change 219

D Subminiature Reader’s Resource Panel Mounting Figure 1A Figure 1B Figure 2 Figure 3 Figure Combination of Mated Connectors A B C F H Number Size Pin (See Note Below) Socket +0,76 (.030) +0,76 (.030) +0,76 (.030) ±0,25 (.010) +0,76 (.030) 1A, 1B A, E Standard Standard 6,35 (.250) 8,63 (.340) 7,49 (.295) — 7,49 (.295) 1A, 1B B, C, D Standard Standard 6,04 (.238) 8,71 (.343) 7,56 (.298) — 7,18 (.283) 2 A, E Standard Float Mount 5,53 (.218) — 6,68 (.263) 3,04 (.120) — 2 B, C, D Standard Float Mount 5,23 (.206) — 6,75 (.266) 3,04 (.120) — 2 A, E Float Mount Standard 5,53 (.218) — 6,68 (.263) 3,04 (.120) — 2 B, C, D Float Mount Standard 5,23 (.206) — 6,37 (.251) 3,30 (.130) — 3 A, E Standard Reverse Float Mount — 9,09 (.358) 7,95 (.313) 3,04 (.120) — 3 B, C, D Standard Reverse Float Mount — 9,16 (.361) 7,64 (.301) 3,04 (.120) — e 3 A, E Reverse Float Mount Standard — 9,09 (.358) 7,95 (.313) 3,04 (.120) — c 3 B, C, D Reverse Float Mount Standard — 9,01 (.355) 7,87 (.310) 3,30 (.130) — r Notes: u 1. A, B, C and H are dimensions between panels and represent the recommended limit to be used in the design of the o connector mounting method. s 2. It is recommended that only one assembly, either pin or e socket, be float mounted. 3. Standard pin assemblies contained 0,38 (.015) thick front R shells on E and A sizes; 0,61(.024) thick front shells on B, C, and D sizes. 4. Standard connectors accommodate a #4 screw. Float s mount connectors accommodate a #2 screw. ’ r e d a e R Dimensions are shown in mm (inch) 220 Dimensions subject to change

D Subminiature Reader’s Resource Panel Cutouts Standard Cutout Rear Mounting Cutout (Optional) Front Panel Mounting Rear Panel Mounting Standard Shell Dual Float Mount Shell Standard Shell Dual Float Mount Shell Standard Shell Shell Mounting A B C D E F G H J Size Method ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,05 (.002) ±0,05 (.002) ±0,05 (.002) Front 22,19 (.874) 11,09 (.437) 24,99 (.984) 12,49 (.492) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) DE Rear 20,47 (.806) 10,23 (.403) 24,99 (.984) 12,49 (.492) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) Front 30,53 (1.202) 15,26 (.601) 33,32 (1.312) 16,66 (.656) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) DA Rear 28,80 (1.134) 14,40 (.567) 33,32 (1.312) 16,66 (.656) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) Front 44,27 (1.743) 22,14 (.872) 47,04 (1.852) 23,52 (.926) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) DB Rear 42,51 (1.674) 21,25 (.837) 47,04 (1.852) 23,52 (.926) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) Front 60,73 (2.391) 30,37 (1.196) 63,50 (2.500) 31,75 (1.250) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) DC Rear 59,08 (2.326) 29,54 (1.163) 63,50 (2.500) 31,75 (1.250) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) Front 58,34 (2.297) 29,18 (1.149) 61,11 (2.406) 30,55 (1.203) 15,82 (.623) 7,92 (.312) 3,04 (.120) 1,52 (.060) 2,10 (.083) R DD Rear 56,33 (2.218) 28,16 (1.109) 61,11 (2.406) 30,55 (1.203) 14,09 (.555) 7,06 (.278) 3,04 (.120) 1,52 (.060) 3,35 (.132) e a Dual Float Mount Shell d Shell Mounting A B C D E F G H J Size Method ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,05 (.002) ±0,05 (.002) ±0,05 (.002) e r DE Front 23,01 (.906) 11,50 (.453) 24,99 (.984) 12,49 (.492) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) ’ Rear 21,28 (.838) 10,64 (.419) 24,99 (.984) 12,49 (.492) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) s Front 31,34 (1.234) 15,67 (.617) 33,32 (1.312) 16,66 (.656) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) DA Rear 29,61 (1.166) 14,80 (.583) 33,32 (1.312) 16,66 (.656) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) R Front 45,08 (1.775) 22,55 (.888) 47,04 (1.852) 23,52 (.926) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) DB Rear 43,33 (1.706) 21,66 (.853) 47,04 (1.852) 23,52 (.926) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) e Front 61,54 (2.423) 30,78 (1.212) 63,50 (2.500) 31,75 (1.250) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) s DC Rear 59,79 (2.354) 29,89 (1.177) 63,50 (2.500) 31,75 (1.250) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) o Front 59,15 (2.329) 29,59 (1.165) 61,11 (2.406) 30,55 (1.203) 16,63 (.655) 8,33 (.328) 2,23 (.088) 1,11 (.044) 2,10 (.083) u DD Rear 57,15 (2.250) 28,57 (1.125) 61,11 (2.406) 30,55 (1.203) 14,90 (.587) 7,46 (.294) 2,23 (.088) 1,11 (.044) 3,35 (.132) r c e Dimensions are shown in mm (inch) Dimensions subject to change 221

D Subminiature Reader’s Resource Plug Contact Cavity Arrangements — Combo D Face View Pin Insert 1 A1 2 A1 A2 A3 A1 A3 A1 1 2 A2 1 2 3 A1 4 5 6 3 4 3 4 5 7 8 9 10 Shell Size E A A A A Contact Arrangment 5W1 3W3 3WK3 7W2 11W1 No. of Size 20 Cavities 4 #20 0 #20 0 5 #20 10 #20 No. of Size 8 Cavities 1#8 3 #8 3 2 #8 1#8 1 2 3 4 5 A1 A2 A3 1 2 A4 A3 A2 5 4 3 2 1 A1 3 4 5 10 9 8 7 6 Shell Size B B B Contact Arrangement 5W5 9W4 13W3 No. of Size 20 Cavities 0 #20 5 #20 10 #20 No. of Size 8 Cavities 5 #8 4 #8 3 #8 A1 1 2 3 4 5 6 7 A2 1 2 3 4 5 A1 6 7 8 9 10 8 9 10 11 12 13 14 15 1112 13 14 15 16 17 18 1920 Shell Size B B Contact Arrangement 17W2 21W1 No. of Size 20 Cavities 15 #20 20 #20 No. of Size 8 Cavities 2 #8 1#8 A1 A2 A3 A4 A5 A6 A7 A8 A1 A2 A3 A4 A5 A6 1 2 3 4 A1 A2 1 2 3 4 5 6 A3 A4 A5 5 6 7 7 8 9 10 11 12 Shell Size C C C Contact Arrangement 8W8 13W6 17W5 No. of Size 20 Cavities 0 #20 7 #20 12 #20 No. of Size 8 Cavities 8 #8 6 #8 5 #8 A1 A2 1 2 3 4 5 6 7 8 9 A3 A4 A1 A2 1 2 3 4 5 6 7 8 9 10 11 A3 A1 1 2 3 4 5 6 7 8 9 10 11 12 13 A2 10 1112 13 14 15 16 17 12 13 14 15 16 17 18 1920 2122 14 15 16 17 18 19 20 2122 23 24 25 Shell Size C C C Contact Arrangement 21WA4 25W3 27W2 No. of Size 20 Cavities 17 #20 22 #20 25 #20 No. of Size 8 Cavities 4 #8 3 #8 2 #8 A1 A2 A3 A4 A5 A6 A7 A1 A2 A3 1 2 3 4 5 6 7 8 A4 9 10 1112 13 14 15 e 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 16 17 18 1920 2122 23 24 25 26 27 28 29 30 3132 c Shell Size D D r Contact Arrangement 24W7 36W4 u No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 o s e 1 2 3 4 5 6 7 8 9 10 11 12 A1 A2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A1 R 13 14 15 16 17 18 1920 21 22 23 24 16 17 18 1920 21 22 23 24 25 26 27 28 29 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 s Shell Size D D Contact Arrangement 43W2 47W1 ’ No. of Size 20 Cavities 41#20 46 #20 r No. of Size 8 Cavities 2 #8 1#8 e d a e Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts. R Dimensions are shown in mm (inch) 222 Dimensions subject to change

D Subminiature Reader’s Resource Receptacle Contact Cavity Arrangements — Combo D Face View Socket Insert 2 A1 1 A3 A2 A1 A3 A2 A1 A2 2 1 A1 6 5 4 A1 3 2 1 4 3 5 4 3 10 9 8 7 Shell Size E A A A A Contact Arrangement 5W1 3W3 3WK3 7W2 11W1 No. of Size 20 Cavities 4 #20 0 #20 0 5 #20 10 #20 No. of Size 8 Cavities 1#8 3 #8 3 2 #8 1#8 5 4 3 2 1 A4 2 1 A3 A2 A1 A1 1 2 3 4 5 A2 A3 5 4 3 6 7 8 9 10 Shell Size B B B Contact Arrangement 5W5 9W4 13W3 No. of Size 20 Cavities 0 #20 5 #20 10 #20 No. of Size 8 Cavities 5 #8 4 #8 3 #8 A2 7 6 5 4 3 2 1 A1 10 9 8 7 6 A1 5 4 3 2 1 15 14 13 12 1110 9 8 20 19 18 17 16 15 14 13 12 11 Shell Size B B Contact Arrangement 17W2 21W1 No. of Size 20 Cavities 15 #20 20 #20 No. of Size 8 Cavities 2 #8 1#8 A8 A7 A6 A5 A4 A3 A2 A1 4 3 2 1 A6 A5 A4 A3 A2 A1 A5 A4 A3 6 5 4 3 2 1 A2 A1 7 6 5 12 11 10 9 8 7 Shell Size C C C Contact Arrangement 8W8 13W6 17W5 No. of Size 20 Cavitites 0 #20 7 #20 12 #20 No. of Size 8 Cavities 8 #8 6 #8 5 #8 A4 A3 9 8 7 6 5 4 3 2 1 A2 A1 A3 1110 9 8 7 6 5 4 3 2 1 A2 A1 A2 13 12 1110 9 8 7 6 5 4 3 2 1 A1 17 16 15 14 13 12 11 10 22 21 20 19 18 17 16 15 14 13 12 25 24 23 22 21 20 19 18 17 16 15 14 Shell Size C C C Contact Arrangement 21WA4 25W3 27W2 No. of Size 20 Cavities 17 #20 22 #20 25 #20 No. of Size 8 Cavities 4 #8 3 #8 2 #8 R e A7 A6 A5 A4 A3 A2 A1 A4 8 7 6 5 4 3 2 1 A3 A2 A1 15 14 13 12 1110 9 a 1716 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 3231 30 29 28 27 26 25 24 23 2221 20 19 18 17 16 d e Shell Size D D r Contact Arrangement 24W7 36W4 No. of Size 20 Contacts 17 #20 32 #20 ’ No. of Size 8 Contacts 7 #8 4 #8 s A2 A1 12 11 10 9 8 7 6 5 4 3 2 1 A1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R 24 23 22 21 20 19 18 17 16 15 14 13 29 28 27 26 25 24 23 22 21 20 19 18 17 16 e 41 40 39 38 37 36 3534 33 32 31 30 29 28 27 26 25 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 s Shell Size D D o Contact Arrangement 43W2 47W1 No. of Size 20 Cavities 41#20 46 #20 u No. of Size 8 Cavities 2 #8 1#8 r c Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts. e Dimensions are shown in mm (inch) Dimensions subject to change 223

D Subminiature Reader’s Resource Plug Contact Cavity Arrangements Face View Pin Insert 1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1112 13 6 7 8 9 9 10 11 12 13 14 15 14 15 16 17 18 1920 21 22 23 24 25 Shell Size E A B Contact Arrangement 9 15 25 Contact Size #20 #20 #20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 34 35 36 37 38 39 4041 42 43 44 45 46 47 48 49 50 Shell Size C D Contact Arrangement 37 50 Contact Size #20 #20 Receptacle Contact Cavity Arrangements Face View Socket Insert 5 4 3 2 1 1312 1110 9 8 7 6 5 4 3 2 1 9 8 7 6 25 24 23 22 21 20 19 18 17 16 15 14 e c Shell Size E A B Contact Arrangement 9 15 25 r Contact Size #20 #20 #20 u o s 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 19 18 17 16 15 14 13 12 1110 9 8 7 6 5 4 3 2 1 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 e R 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 50 49 48 47 46 45 44 43 42 4140 39 38 37 36 35 34 Shell Size C D s Contact Arrangement 37 50 Contact Size #20 #20 ’ r e d a e R Dimensions are shown in mm (inch) 224 Dimensions subject to change

D Subminiature Reader’s Resource Pushfit/Boardlock — Standard Straight (Z) 90°(C) Pushfit/Boardlock — European Straight (-146) 90°(-146) Alternate 50 Ohm Coaxial Configuration R Straight (X) 90°(X) e a d 5,59 (.220) e 0,62 (.024) MIN 2,54 (.100) r Ø 0,79 (.031) Ø 0,79 (.031) ’ 0,62 (.024) s 2,54 (.100) 6,96 (2.74) MIN 11,94 ± 0,33 R (.470 ± .013) e s o u r c e Dimensions are shown in mm (inch) Dimensions subject to change 225

D Subminiature Reader’s Resource Hardware Views (Standard) Through Hole (Eyelet) Tab Shells (K) Clinch Nut (E) K K 4,19 (.165) MAX Ø 3,05 (.120) Ø 4,11 (.162) #4-40 UNC 0,60 (.025) MAX. Dimensions — Plug Dual Float Mount (Y) K K Shell Size ±0,317 (.0125) ±0,25 (.010) DE 1,206 (.0475) — DA 1,206 (.0475) — 3,30 (.130) MAX. DB — 1,52 (.060) 0,79 ± 0,13 DC — 1,52 (.060) (.031 ± .005) DD — 1,52 (.060) OVERALL FREE FLOAT 0,79 (.031) 0,10 - 0,30 OTAL DIAMETRICAL FLOAT (.004 - .012) (FOR MISALIGNMENT) Dimensions — Receptacle K Shell Size ±0,318 (.0125) DE 1,206 (.0475) Ø 2,26 ± 0,08 DA 1,206 (.0475) (.089 ± .003) DB 1,206 (.0475) DC 1,206 (.0475) RIVET WASHER DD 1,206 (.0475) Alternate Bracket Configuration Supplied with connectors without boardlocks. Standard Footprint (P) European Footprint (P) Dimensions e Shell R S c Size ±0,25 (.010) ±0,25 (.010) r DE, DA, DB, DC 11,61 (.457) 12,78 (.503) u DD 12,78 (.503) 13,95 (.549) o R S s e R s ’ r e d a e R Dimensions are shown in mm (inch) 226 Dimensions subject to change

D Subminiature Reader’s Resource Hardware Views (European) Through Hole Clinch Nut (X/E) M3 #4-40 UNC-3B Ø 3,05 (.120) 2,80 (.110) Plastic Bracket with Bushing (1A5N) Plastic Bracket with Captive Nut (1ATN/1AVN) Plastic Bracket with Post (1APN/1A6N) Ø 3,05(.120) M3 M3 #4-40 #4-40 Metal Bracket with Bushing (1AFN) Metal Bracket with Captive Nut (1A9N/1A7N) Metal Bracket with Post (1AHN/1A8N) R e a d M3 M3 e Ø 3,05(.120) #4-40 #4-40 r ’ s R e s o u r c e Dimensions are shown in mm (inch) Dimensions subject to change 227

° PCB Hole Pattern — Standard Coaxial 90 — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 5,49 5,49 (.216) (.216) 6,86 6,86 6,86 6,86 (.270) (.270) Coax (.270) (.270) Coax Signal Mounting Hole Contact Contact 22,,5544 ((..110000)) Contact 22,,5544 ((..110000)) MHooluenting 22,,5544 ((..110000)) 2,74 (.108) MHooluenting 2,84 (.112) 2,84 (.112) (9.3,4700) (8.3,6440) 8,2CC3 oo(.an3xt2a 4c)t 7,19 (.283) (8.3,6440) 9,40 (.370) (8.3,6440) SCiognntaalct (5.2,4196) (7.2,1893) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47.04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 7,67 (.302) 5,94 (.234) 9,60 (.378) 9,60 (.378) 6,86 (.270)6,86 (.270) 8,23 (.324) CCooanxta ct 0,86 (.034) Mounting 2,54 (.100) Mounting 2,54 (.100) Hole 2,54 (.100) Hole 2,54 (.100) 2,84 (.112) Coax (9.3,4700) (8.3,6440)SCiognntaalct (5.2,4196)Co(n5.t2a,41c96t) 7,19 (.283) 8,64 (.340) 9,40 (.370) REAR FLANGE REF 8,23 (.324)8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 8,28 (.326) 7,77 (.306) 8,28 (.326) Coax 5,54(.218) Coax Contact Contact 5,54(.218) Mounting 2,54 (.100) MHooluenting 2,54 (.100) 5,54(.218) Hole 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 8,64 (.340) 7,19 (.283) (4.1,1643) SCiognntaalct 9,40 (.370) 8,64 (.340) 7,19 (.283) 2,80 (.1(4.11,016)43) SCiognntaalct 9,40 (.370) REAR FLANGE REF 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 e 47,04 (1.852) 47,04 (1.852) c 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) r 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) u 8,28 (.326) 8,28 (.326) o 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) CCooanxta ct MHooluenting Signal 5,54(.218)5,54(.218) s 22,,5544 ((..110000)) 5,54(.218) (2.1,1824) 22,,5544 ((..110000)) Contact (2.1,1824) MHooluenting e R 8,64 (.340) 7,19 (.283) 28,,8208 ((..131206)) SCiognntaalct 9,40 (.370) 9,40 (.370) 8,64 (.340) 8,28CC (oo.3an2xta6 c)t 7,19 (.283) s REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF ’ 9,68 (.381) 9,68 (.381) Signal Contact X Recommended PCB Hole X 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) r 0,76 (.030) 1,14 (.045) 15,19 (.598) 15,19 (.598) e Mounting Type Recommended PCB Hole X d Shell Size B Without Boardlock 3,05 (.120) B Contact Arrangement 17W2 21W1 a No. of Size 20 Cavities 15 #20 With Boardlock 3,10 (.122) 20 #20 e No. of Size 8 Cavities 2 #8 Size 8 Contact Type Recommended PCB Hole X 1#8 R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 228 Dimensions subject to change

° PCB Hole Pattern — Standard Coaxial 90 — Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,56 (.888) 22,10 (.870) 22,86 (.900) 22,86 (.900) 19,33 (.761) 15,24 (.600) 16,51(.650) 15,82 (.623) 16,56 (.652) 8,89 (.350) 10,16 (.400) 9,09 (.358) 11,10 (.437) CCooanxta ct 2,54 (.100) 3,81 (.150) CCooanxta ct 2,36 (.093) 4,37 (.172) MHooluenting 2,54 (.100) MHooluenting 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 8,64 (.340) 9,40 (.370) 8,64 (.340) 9,40 (.370) Signal 7,19 (.283) Contact REAR FLANGE REF REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) Coax 8,28 (.326) 8,28 (.326) Coax 5,54(.218) Contact 5,54(.218)5,54(.218) Contact Mounting Mounting Hole 2,54 (.100) 5,54(.218) Hole 2,54 (.100) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 8,64 (.340) Signal 2,80 (.110) 7,19 (.283) 9,40 (.370) 8,64 (.340) Signal 2,80 (.110) 7,19 (.283) 9,40 (.370) Contact 8,28 (.326) Contact 8,28 (.326) REAR FLANGE REF 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 13,82 (.544) R 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Coax 5,54(.218)5,54(.218) Contact e Mounting 2,54 (.100) 5,54(.218) Hole a 2,54 (.100) d 2,84 (.112) e 8,64 (.340) Signal 2,80 (.110) 7,19 (.283)9,40 (.370) Contact 8,28 (.326) r REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF ’ 9,68 (.381) 9,68 (.381) s 12,42 (.489) 15,19 (.598) R 17,96 (.707) Shell Size C Signal Contact X Recommended PCB Hole X C e Contact Arrangement 25W3 0,76 (.030) 1,14 (.045) 27W2 s NNoo.. ooff SSiizzee 280 C Cavaivtiiteises 223 ##280 Mounting Type Recommended PCB Hole X 252 ##280 o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 229

° PCB Hole Pattern — Standard Coaxial 90 — Plug 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal Contact 5,54(.218) 2,84 (.112) Mounting Hole 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,84 (.112) Coax 11,53 (.454) 64,9,114 ( .(2.17623)) 6,86 (.1237,07)2 (.540) Contact 9,40 (.370) 10,06 (.396) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 20,57 (.810) REAR FLANGE REF 15,19 (.598) 20,57 (.810) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Signal Contact 5,54(.218)5,54(.218) 5,54(.218) 2,84 (.112) Mounting Hole 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,80 (.110) 8,28 (.326) 10,06 (.396) 9,40 (.370) CCooanxta ct 6,91 (.272) 6,91 (.272) 11,53 (.454) e 9,68 (.381) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 12,42 (.489) REAR FLANGE REF c 15,19 (.598) 15,19 (.598) r 20,57 (.810) 17,96 (.707) 20,70 (.815) u o Shell Size D D Contact Arrangement 43W2 47W1 s No. of Size 20 Cavities 41#20 46 #20 e No. of Size 8 Cavities 2 #20 1#20 R s Signal Contact X Recommended PCB Hole X ’ 0,76 (.030) 1,14 (.045) r e Mounting Type Recommended PCB Hole X d Without Boardlock 3,05 (.120) With Boardlock 3,10 (.122) a e Size 8 Contact Type Recommended PCB Hole X Coaxial (C or X) 1,14 (.045) R Dimensions are shown in mm (inch) 230 Dimensions subject to change

° PCB Hole Pattern — Standard Coaxial 90 — Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 22,,5544 ((..110000)) (5.2,4196) (5.2,4196) SCiognntaalct Mounting Hole 22,,5544 ((..110000)) (6.2,8760) (6.2,8760) CCooanxta ct MHooluenting 22,,5544 ((..110000)) (6.2,87602),74 (.(16.02,887)60) CCooanxta ct MHooluenting 2,84 (.112) 2,84 (.112) (9.3,4700) (8.3,6440) 8,2CC3 oo(.an3xt2a 4c)t 7,19 (.283) (8.3,6440) 9,40 (.370) (8.3,6440) SCiognntaalct (5.2,4196) (7.2,1893) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 5,94 (.234) 7,67 (.302) 9,60 (.378) 9,60 (.378) 6,86 (.270)6,86 (.270) 0,86 (.034) Coax 8,23 (.324) Contact Mounting Hole 2,54 (.100) 2,54 (.100) Mounting 2,54 (.100) Hole 2,54 (.100) 2,84 (.112) Coax (9.3,4700) (8.3,6440)SCiognntaalct 5,49Con5ta,4c9t 7,19 (.283) 9,40 (.370) 8,64 (.340) (.216) (.216) REAR FLANGE REF 8,23 (.324)8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 8,28 (.326) 7,77 (.306) 5,54(.218) Mounting CCooanxta ct 5,54(.218) CCooanxta ct Hole 2,54 (.100) MHooluenting 5,54(.218) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 9,40 (.370) SCiognntaalct (4.1,1643) 7,19 (.283) 8,64 (.340) 9,40 (.370) SCiognntaalct (4.12,16,8430) (.110) 7,19 (.283) 8,64 (.340) REAR FLANGE REF 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) R 11,05 (.435) 11,05 (.435) 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) CCooanxta ct MHooluenting Signal 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) e a 22,,5544 ((..110000)) 5,54(.218) (2.1,1824) 22,,5544 ((..110000)) Contact (2.1,1824) MHooluenting d e Coax 8,64 (.340) 7,19 (.283) 28,,8208 ((..131206)) SCiognntaalct 9,40 (.370) 9,40 (.370) 8,64 (.340) 8,28C (o.3n2ta6c)t 7,19 (.283) r ’ REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF s 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) R 15,19 (.598) 15,19 (.598) Signal Contact X Recommended PCB Hole X e Shell Size B 0,76 (.030) 1,14 (.045) B Contact Arrangement 17W2 21W1 s No. of Size 20 Cavities 15 #20 Mounting Type Recommended PCB Hole X 20 #20 o No. of Size 8 Cavities 2 #8 Without Boardlock 3,05 (.120) 1#8 u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 231

° PCB Hole Pattern — Standard Coaxial 90 — Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,86 (.900) 22,86 (.900) 22,10 (.870) 22,56 (.888) 19,33 (.761) 16,51(.650) 15,24 (.600) 16,56 (.652) 15,82 (.623) 10,16 (.400) 8,89 (.350) 11,10 (.437) 9,09 (.358) 3,81 (.150) 2,54 (.100) Coax 4,37 (.172) 2,36 (.093) Coax Contact Mounting Contact Hole Mounting Hole 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 9,40 (.370) 8,64 (.340) 7,19 (.283) 9,40 (.370) 8,64 (.340) Signal Contact REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) Coax 8,28 (.326) 8,28 (.326) 8,28 (.326) Coax Mounting Contact 5,54(.218) 5,54(.218)5,54(.218) Contact Mounting Hole Hole 5,54(.218) 2,54 (.100) 2,54 (.100) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 9,40 (.370) 7,19 (.283) 2,80 (.110) 8,64 (.340) 8,64 (.340) Signal 2,80 (.110) 7,19 (.283) 9,40 (.370) 8,28 (.326) Signal Contact 8,28 (.326) Contact REAR FLANGE REF 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 13,82 (.544) 11,05 (.435) 11,05 (.435) e Coax 8,28 (.326) 8,28 (.326) c Mounting Contact 5,54(.218)5,54(.218) Hole 5,54(.218) 2,54 (.100) r 2,54 (.100) u 2,84 (.112) s o 9,40 (.370)7,19 (.283) 28,,8208 ((..131206)) SCiognntaalct 8,64 (.340) e REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) R 12,42 (.489) 15,19 (.598) 17,96 (.707) s ’ Shell Size C Signal Contact X Recommended PCB Hole X C r Contact Arrangement 25W3 0,76 (.030) 1,14 (.045) 27W2 e NNoo.. ooff SSiizzee 280 C Cavaivtiiteises 223 ##280 Mounting Type Recommended PCB Hole X 252 ##280 d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 232 Dimensions subject to change

° PCB Hole Pattern — Standard Coaxial 90 — Receptacle 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal Contact Mounting Hole 5,54(.218) 2,84 (.112) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,84 (.112) Coax 10,06 (.396) 9,40 (.370) Contact 13,72 (.564,806) (.270)46,1,941 ( .(1.26732)) 11,53 (.454) 9,68 (.381) REAR FLANGE REF 20,57 (.810) 12,42 (.489) REAR FLANGE REF 15,19 (.598) 20,57 (.810) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) Signal Contact 5,54(.218) 2,84 (.112) 2,84 (.112) Mounting Hole 2,84 (.112) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,80 (.110) 8,28 (.326) 11.53 (.454) 11,53 (.454) 6,91 (.272) 6,91 (.272) CCooanxta ct 9,40 (.370) 10,06 (.396) 9,68 (.381) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 12,42 (.489) REAR FLANGE REF 15,19 (.598) 15,19 (.598) 17,96 (.707) 20,57 (.810) 20,70 (.815) Shell Size D D R Contact Arrangement 43W2 47W1 No. of Size 20 Cavities 41#20 46 #20 e No. of Size 8 Cavities 2 #8 1#8 a d e r ’ s R Signal Contact X Recommended PCB Hole X e 0,76 (.030) 1,14 (.045) s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 233

° PCB Hole Pattern — European Coaxial 90 — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) Signal 6,86 6,86 Contact 5,49 5,49 (.270) (.270) 6,86 (.270) 6,86 (.270) (2.1,5040) (.216) (.216) (2.1,5040) MHooluenting (2.1,5040) (2.1,5040) MHooluenting (2.1,5040) 2,74 (.108) (2.1,5040) MHooluenting 10,90 (.429) CoCntoaacxt 9,40 (.370) 10,90 (.429) CoCnotaacxt 9,40 (.370) 10,90 (.429) CoCnotaacxt 5,49(.216) SCiognntaalct 9,40 (.370) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF A Shell Size E A 3W3 Contact Arrangement 5W1 7W2 0 #20 No. of Size 20 Cavities 4 #20 5 #20 3 #8 No. of Size 8 Cavities 1#8 2 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 9,60 (.378) 9,60 (.378) 7,67 (.302) 5,94 (.234) 6,86 6,86 (.270) (.270) Mounting CCooanxta ct 0,86 (.034) MHooluenting CSoignntaalct 8,23 (.324) 2,54 Hole 2,54(.100) (.100) 2,54 (.100) 2,54 (.100) Coax Contact 10,90 (.429) 5,49 5,49 9,40 (.370) (.216) (.216) 10,90 (.429) 9,40 (.370) REAR FLANGE REF 8,23 (.324)8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 8,28 (.326) 7,77 (.306) 8,28 (.326) CCooanxta ct 5,54(.218) SCiognntaalct MHooluenting CCooanxta ct 5,54(.218) MHooluenting 2,54 (.100) (2.1,5040) 2,54 (.100) 5,54(.218) (2.1,5040) 4,14 (.163) CSonigtnaactl 2,80 (.110) 10,90 (.429) 9,40 (.370) 10,90 (.429) 4,14 (.163) 9,40 (.370) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 47,04 (1.852) e 16,56 (.652) 16,56 (.652) c 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) r 8,28 (.326) 8,28 (.326) Mounting 11,085,2 (8.4 (3.352)6) 8,2181 ,(0.352 (6.4)35) u 5,54(.52,1584)(.52,1584)(.218) 2,54 Hole SCiognntaalct 5,54(.218)5,54(.218) 2,54 MHooluenting o 2,54 (.100) (.100) 2,54(.100) (.100) s Coax R e 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370)Contact 10,90 (.429) 8,2CC8 oo(.an3xt2a 6c)t 9,40 (.370) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF s 12,42 (.489) 12,42 (.489) ’ Signal Contact X Recommended PCB Hole X 15,19 (.598) 15,19 (.598) r Shell Size B 0,60 (.024) 1,00 (.039) B e Contact Arrangement 17W2 21W1 No. of Size 20 Cavities 15 #20 Mounting Type Recommended PCB Hole X 20 #20 d No. of Size 8 Cavities 2 #8 Without Boardlock 3,05 (.120) 1#8 a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 234 Dimensions subject to change

° PCB Hole Pattern — European Coaxial 90 — Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,56 (.888) 19,33 (.761) 22,86 (.900) 22,86 (.900) 15,82 (.623) 16,56 (.652) 15,24 (.600) 16,51(.650) 9,09 (.358) 11,10 (.437) Mounting CCooanxta ct 2,584, 8(.91 0(.03)50) 10,136, 8(.14 0(.01)50) MHooluenting CCooanxta ct 2,36(.093) 4,37(.172) 2,54(.100) Hole 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 10,90 (.429) 9,40 (.370) Signal 9,40 (.370) 10,90 (.429) 9,40 (.370) Contact REAR FLANGE REF 17,96 (.707) REAR FLANGE REF REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 11,05 (.435) 8,71 (.343) 11,05 (.435) 11,05 (.435) CCooanxta ct 8,258, 5(.43(2.261)8) HMooluenting CCooanxta ct 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) MHooluenting 2,54 (.100) 5,54(.218) (2.1,5040) 2,54 (.100) 5,54(.218) (2.1,5040) 2,80 (.110) 2,80 (.110) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) Contact Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 2,54 (.100) CCooanxta ct 8,258, 5(.43(2.526,1)584)(.52,15884,)2(.82 1(.83)26) (2.1,5040) MHooluenting 2,54 (.100) CCooanxta ct 8,258, 5(.43(2.526,1)584)(.52,15884,)2(.82 1(.83)26) (2.1,5040) MHooluenting R e a 10,90 (.429) 82,,2880 ((..311206)) 9,40 (.370) 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370) d Signal Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF e 12,42 (.489) 12,42 (.489) 12,42 (.489) r 15,19 (.598) 15,19 (.598) 15,19 (.598) ’ 17,96 (.707) s Shell Size C C Contact Arrangement 25W3 27W2 No. of Size 20 Cavities 22 #20 25 #20 R No. of Size 8 Cavities 3 #8 2 #8 Signal Contact X Recommended PCB Hole X e 0,60 (.024) 1,00 (.039) s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 235

° PCB Hole Pattern — European Coaxial 90 — Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) (2.1SC,50iog40nn)taalct(5.2,4196) (5.2,4196) (2.1,5040) MHooluenting (2.1,5040) (6.2,8760) (6.2,8760) (2.1,5040) MHooluenting HCiognht aPcotwer6,86 (.22,7704) (6.,18068 ().270) MHooluenting 2,54 (.100) 10,90 (.429) CoCntoaacxt 9,40 (.370) 10,90 (.429) CoCnotaacxt 9,40 (.370) (1.04,2990) (5.2,4196) SCiognntaalct9,40 (.370) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REAR FLANGE Shell Size E A REF A REF Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 9,60 (.378) 9,60 (.378) 5,94 (.234) 7,67 (.302) (6.2,8760) (6.2,8760) Mounting MHooluenting 0,86 (.034) CCooanxta ct CSoignntaalct 2,54(.1080,2)3 (.324) (2.1,5040) Hole 2,54 (.100) 2,54 (.100) Coax Contact 10,90 (.429) (5.2,4196) (5.2,4196) 9,40 (.370) 9,40 (.370) 10,90 (.429) REAR FLANGE REF 8,23 (.324)8,23 (.324) REAR FLANGE REF Shell Size A REAR FLANGE REF B REAR FLANGE REF Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 8,28 (.326) 7,77 (.306) MHooluenting SCiognntaalct 5,54(.218) CCooanxta ct MHooluenting 5,54(.218) CCooanxta ct (2.1,5040) 2,54 (.100) (2.1,5040) 5,54(.218) 2,54 (.100) 2,80 (.110) CSonigtnaactl 9,40 (.370) 4,14 (.163) 10,90 (.429) 9,40 (.370) 4,14 (.163) 10,90 (.429) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 47,04 (1.852) e 16,56 (.652) 16,56 (.652) c 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) r 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Mounting 8,28 (.326) 8,28 (.326) u 5,54(.52,1584)(.52,1584)(.218) 2,54 Hole SCiognntaalct 5,54(.218)5,54(.218) 2,54 MHooluenting o 2,54 (.100) (.100) 2,54(.100) (.100) s R e 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370)CCooanxta ct 10,90 (.429) 8,2CC8 oo(.an3xt2a 6c)t 9,40 (.370) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF s 12,42 (.489) 12,42 (.489) ’ Signal Contact X Recommended PCB Hole X 15,19 (.598) 15,19 (.598) r Shell Size B 0,60 (.024) 1,00 (.039) B e Contact Arrangement 17W2 Mounting Type Recommended PCB Hole X 21W1 No. of Size 20 Cavities 15 #20 20 #20 d No. of Size 8 Cavities 2 #8 Without Boardlock 3,05 (.120) 1#8 a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 236 Dimensions subject to change

° PCB Hole Pattern — European Coaxial 90 — Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,86 (.900) 22,86 (.900) 19,33 (.761) 22,56 (.888) 16,51(.650) 15,24 (.600) 16,56 (.652) 15,82 (.623) 10,16 (.400) 8,89 (.350) 11,10 (.437) 9,09 (.358) MHooluenting 3,81 (.150) 2,54 (.100) CCooanxta ct MHooluenting 4,37(.172) 2,36(.093) CCooanxta ct 2,54(.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 9,40 (.370) 10,90 (.429) 9,40 (.370) Signal 9,40 (.370) 10,90 (.429) Contact REAR FLANGE REF REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) HMooluenting 5,584,2(.82 1(.83)26) CCooanxta ct CCooanxta ct 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) MHooluenting (2.1,5040) 5,54(.218) 2,54 (.100) 2,54 (.100) 5,54(.218) (2.1,5040) 2,80 (.110) 2,80 (.110) 9,40 (.370) 8,28 (.326) Signal 10,90 (.429) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) Contact Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 16,56 (.652) 16,56 (.652) 15,70 (.618) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) MHooluenting 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) CCooanxta ct CCooanxta ct 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 2,54 MHooluenting R e (2.1,5040) 5,54(.218) 2,54 (.100) 2,54 (.100) 5,54(.218) (.100) a d 2,80 (.110) Signal 2,80 (.110) 9,40 (.370) 6,91 (.287,228) (.362,961) (.272) SCiognntaalct 10,90 (.429) 10,90 (.429) Contact 6,91 (.287,228) (.362,961) (.272) 9,40 (.370) e r REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF ’ 12,42 (.489) 12,42 (.489) 12,42 (.489) s 15,19 (.598) 15,19 (.598) 15,19 (.598) 17,96 (.707) R Shell Size C C Contact Arrangement 25W3 Signal Contact X Recommended PCB Hole X 27W2 e No. of Size 20 Cavities 22 #20 0,60 (.024) 1,00 (.039) 25 #20 s No. of Size 8 Cavities 3 #8 2 #8 Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 237

PCB Hole Pattern — Standard/European Coaxial Straight — Plug 25,00 (.984) 33,32(1.312) 33,32 (1.312) 5,49 5,49 Mounting (6.2,8760 ) (6.2,8760 ) (6.2,8760) (6.2,8760) Signal (.216) (.216) Hole 2,54 Contact Coax Contact 2,84 2,54 (.100) 2,74 (.108) 2,54 (.100) (.112) (.100) 2,54 (.100) MHooluenting 8,23 (.324) (2.1,5040) CCoonatxa ct MoHuonlteing (2.1,5040 ) CSoignntaaclt (5.2,4196) 2,8C4Coonataxc t (.112) Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 6,86 7,67 (.302) 5,94 (.234) (.270) (.270) 0,86 8,23 (.324) (.034) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) MHooluenting SCiognntaalct 52,,4594 (.1050,)49 Coax Contact Mounting Hole Coax (.216) (.216) Contact 8,23 (.324) 8,23 (.324) Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 8,28 (.326) 7,77 (.306) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Coax Mounting Hole 2,80 (.110) Coax 4,14 (.163) Contact SCiognntaalct 4,14 (.163) Contact Signal 6,91 (.272) Contact 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04(1.852) 47,01(1.852) e 16,56 (.652) 16,56 (.652) c 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) r 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) u 5,54(.218)5,54(.218) Signal 5,54(.218)5,54(.218) o 5,54(.218) Contact Coax Contact 2,84 (.112) s 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) e R Mounting Hole SCiognntaalct 28,,8208 ((..131206)) CCooanxta ct Mounting Hole 8,28 (.326) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) s 9,68 (.381) 9,68 (.381) Signal Contact X Recommended PCB Hole X 9,68 (.381) 9,68 (.381) ’ 0,60 (.024) 1,00 (.039) 15,1129, 4(.25 9(.84)89) 12,1452, 1(.94 8(.95)98) r Shell Size B 0,76 (.030) 1,14 (.045) Contact Arrangement 17W2 B e No. of Size 20 Cavities 15 #20 Mounting Type Recommended PCB Hole X 21W1 d No. of Size 8 Cavities 2 #8 Without Boardlock 3,05 (.120) 20 #20 1#8 a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 238 Dimensions subject to change

PCB Hole Pattern — Standard/European Coaxial Straight — Plug 63,50 (2.500) 63,50(2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 22,56 (.888) 16,56 (.652) 15,24 (.600) 16,51(.650) 15,82 (.623) 8,89 (.350) 10,16 (.400) 9,09 (.358) 11,10 (.437) CCooanxta ct 2,54 (.100) 3,81 (.150) Mounting CCooanxta ct 2,36 (.093) 4,37 (.172) Hole 2,84 2,54 (.100) 2,54 (.100) (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63.50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 11,05 (.435) 8,71 (.343) 8,28 (.326) 11,05 (.435) 11,05 (.435) 5,54(.218) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,80 (.110) Coax Mounting Hole SCiognntaalct 6,91 (.287,228) (.326) Contact Mounting Hole SCiognntaalct 28,,8208 ((..131206)) CCooanxta ct 9,68 (.381) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) R 5,54(.218) 2,54 (.100) e 2,54 (.100) 2,84 (.112) a Mounting Hole SCiognntaalct 28,,8208 ((..131206)) CCooanxta ct d 6,91 (.272) 6,91 (.272) e 9,68 (.381) 9,68 (.381) r 12,42 (.489) ’ 15,19 (.598) s 17,96 (.707) Shell Size C C Contact Arrangement 25W3 Signal Contact X Recommended PCB Hole X 27W2 R No. of Size 20 Cavities 22 #20 0,60 (.024) 1,00 (.039) 25 #20 e No. of Size 8 Cavities 3 #8 2 #8 0,76 (.030) 1,14 (.045) s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 239

PCB Hole Pattern — Standard/European Coaxial Straight — Plug 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 12,42 (.489) 9,68 (.381) 6,86 (.270) 6,91 (.272) Coax 4,14 (.163) Contact 2,84 (.112) 2,54 (.100) 3,96 (.156) 2,54 (.100) 2,84 (.112) 2,84 (.112) Mounting Hole 5,54(.218) Signal Contact 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 20,70 (.815) 17,96 (.707) 20,57 (.810) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 8,28 (.326) Coax 2,80 (.110) Contact 2,54 (.100) 2,84 (.112) 2,54 (.100) 3,96 (.156) 2,84 (.112) 5,54(.218) Mounting Hole 5,54(.218)5,54(.218) Signal Contact 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) e Shell Size D D c Contact Arrangement 43W2 47W1 r No. of Size 20 Cavities 41#20 46 #20 u No. of Size 8 Cavities 2 #8 1#8 o s e R Signal Contact X Recommended PCB Hole X s ’ 0,60 (.024) 1,00 (.039) r 0,76 (.030) 1,14 (.045) e Mounting Type Recommended PCB Hole X d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 240 Dimensions subject to change

PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle 25,00 (.984) 33,32(1.312) 33,32 (1.312) 6,86 6,86 6,86 6,86 5,49 5,49 Mounting (.270) (.270) (.270) (.270) Signal (.216) (.216) Hole 2,54 Contact Coax Contact 2,84 2,54 (.100) 2,74 (.108) 2,54 (.100) (.112) (.100) 2,54 (.100) MHooluenting 8,23 (.324) (2.1,5040) CCoonatxa ct MoHuonlteing (2.1,5040 ) CSoignntaaclt (5.2,4196) CCoonataxc t 2,84 (.112) Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 7,67 (.302) (6.2,8760) (6.2,8760 ) 5,94 (.234) (0.0,8364 ) 8,23 (.324) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) MHooluenting SCiognntaalct 52,,4594 (.1050,)49 Coax Contact CCooanxta ct Mounting Hole (.216) (.216) 8,23 (.324) 8,23 (.324) Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 8,28 (.326) 7,77 (.306) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 2,54 (.100) 2,54 (.100) Coax Mounting Hole Coax 2,80 (.110) Mounting Hole Contact Contact Signal 4,14 (.163) 4,14 (.163) Contact Signal Contact 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04(1.852) 47,01(1.852) R 16,56 (.652) 16,56 (.652) e 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) a 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) d 5,54(.218)5,54(.218) Signal 5,54(.218)5,54(.218) 5,54(.218) Contact Coax Contact 2,84 e (.112) 2,54 (.100) 2,54 (.100) r 2,84 (.112) 2,54 (.100) 2,54 (.100) ’ Mounting Hole SCiognntaalct 28,,8208 ((..131206)) CCooanxta ct Mounting Hole 8,28 (.326) s 6,91 (.272) 6,91 (.272) Signal Contact X Recommended PCB Hole X 6,91 (.272) 6,91 (.272) R 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 0,60 (.024) 1,00 (.039) 12,42 (.489) 12,42 (.489) e 0,76 (.030) 1,14 (.045) 15,19 (.598) 15,19 (.598) s Shell Size B Mounting Type Recommended PCB Hole X B o CNoon. toafc St iAzerr a2n0g Ceamveitniets 1157 #W220 Without Boardlock 3,05 (.120) 2201 #W210 u No. of Size 8 Cavities 2 #8 With Boardlock 3,10 (.122) 1#8 r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 241

PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,56 (.652) 22,56 (.888) 16,51(.650) 15,24 (.600) 15,82 (.623) 11,10 (.437) 9,09 (.358) 10,16 (.400) 8,89 (.350) MHooluenting 3,81 (.150) 2,54 (.100) CCoonatax ct 2,84 4,37 (.172) 2,36 (.093) CCoonataxc t 2,54 (.100) (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) Mounting Signal Hole Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63.50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,84 (.112) Coax 2,80 (.110) 2,80 (.110) Coax Contact 8,28 (.326) SCiognntaalct Mounting Hole Mounting Hole SCiognntaalct 8,28 (.326) Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 e c r u o s e R Shell Size C C s CNoon. toafc St iAzerr a2n0g Ceamveitniets 2225 #W230 Signal Contact X Recommended PCB Hole X 2257 #W220 ’ No. of Size 8 Cavities 3 #8 0,60 (.024) 1,00 (.039) 2 #8 r 0,76 (.030) 1,14 (.045) e Mounting Type Recommended PCB Hole X d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R Coaxial (C or X) 1,14 (.045) Dimensions are shown in mm (inch) 242 Dimensions subject to change

PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 13,72 (.540) 6,86 (.270) 4,14 (.163) Coax Contact 2,84 (.112) 2,54 (.100) 2,84 (.112) 2,54 (.100) 3,96 (.156) 2,84 (.112) 5,54(.218) Mounting Hole 5,54(.218)5,54(.218) Signal Contact 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12(2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 20,57 (.810) 17,96 (.707) 20,57 (.810) 17,96 (.707) 13,72 (.540) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) Coax 8,28 (.326) Coax 8,28 (.326) Contact 2,80 (.110) Contact 2,80 (.110) 3,96 (.156) 22,,5544 ((..110000)) 2,84 (.112) 3,96 (.156) 22,,5544 ((..110000)) 2,84 (.112) 2,84 (.112) 2,84 (.112) Mounting Hole 5,54(.218) MoHuonlteing 5,54(.218) Signal Contact 5,54(.218)5,54(.218) Signal Contact 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) R Shell Size D D Contact Arrangement 43W2 47W1 e No. of Size 20 Cavities 41#20 46 #20 No. of Size 8 Cavities 2 #8 1#8 a d e r ’ s Signal Contact X Recommended PCB Hole X R 0,60 (.024) 1,00 (.039) e 0,76 (.030) 1,14 (.045) s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c Coaxial (C or X) 1,14 (.045) e Dimensions are shown in mm (inch) Dimensions subject to change 243

° PCB Hole Pattern — Standard High Power 90 — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) (5.2,4196) (5.2,4196) (6.2,8760) (6.2,8760) (6.2,8760) (6.2,8760) SCiognntaalct HCiognht aPcotwer (2.1,1824) MHooluenting HCiognht aPcotwer 2(.08,1507) MHooluenting HCiognht aPcotwer 2,74 (.108) 2,84 (.112) MHooluenting 2(.08,1507) Signal 5,49 2(.08,1507) (8.3,6440) (8.3,2234) 11,53 (.454) (8.3,6440) (8.3,6440) Contact (.216) 11,53 (.454) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 33,32 (1.312) 47,04 (1.852) 9,60 (.378) 9,60 (.378) 14,48 (.570) 14,48 (.570) 6,86 6,86 (.270) (.270) 8,23 (.324) 2,84 MoHuonlteing Signal HiCgho nPtaocwter (.112) 20,57 HiCgho nPtaocwter 0,86 (.034) MHooluenting Contact (.810) 7,67 (.302) 5,94(.234) 5,49 5,49 (8.3,6440) (.216) (.216) 11,53 (.454) REAR FLANGE REF 8,23(.324) 8,23(.324) REAR FLANGE REF 8,64 (.340) 20,57 (.810) Shell Size A REAR FLANGE REF B REAR FLANGE REF Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 14,48 (.570) 47,04 (1.852) 14,48 (.570) 8,28 (.326) 14,48 (.570) 7,77 (.306) 5,54(.218) 7,77 (.306) 14,48 (.570) 8,28 (.326) 2,84 5,54(.218) HiCgho nPtaocwter (.112) Mounting Hole HiCgho nPtoawcter 5,54(.218) (2.1,1824) MoHuonlteing 4,14 Signal 2,80 (.110) 8,64 (.340) 11,53 (.454) (.163) 6,91 (.272) Contact 20,57 (.810) 8,64 (.340) 11,53 (.454) (4.1,1643) 6,91 (.272) CSoignntaaclt 20,57 (.810) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 16,56 (.652) 16,56 (.652) e 13,82 (.544) 13,82 (.544) c 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) r 5,54(.218)5,54(.218) u o e s MHooluenting CSoignntaaclt HCigohn Ptaocwter (2.1,1824) R 20,57 (.810) 8,28 (.326) s 8,64 (.340) 6,91 (.272) 6,91 (.272) 11,53 (.454) ’ 9,68 (.381) 9,68 (.381) r Signal Contact X Recommended PCB Hole X REAR FLANGE REF 12,42 (.489) 12,42 (.489) REAR FLANGE REF e 0,76 (.030) 1,14 (.045) 15,19 (.598) 15,19 (.598) d SChoneltla Scti zAerrangement 17BW2 Mounting Type Recommended PCB Hole X 21BW1 a No. of Size 20 Cavities 15 #20 Without Boardlock 3,05 (.120) 20 #20 No. of Size 8 Cavities 2 #8 1#8 With Boardlock 3,10 (.122) e R Size 8 Contact Type Recommended PCB Hole X High Power (H) 3,56 (.140) Dimensions are shown in mm (inch) 244 Dimensions subject to change

° PCB Hole Pattern — Standard High Power 90 — Plug 63,50 (2.500) 63,50 (2.500) 22,86 (.900) 22,86 (.900) 22,56 (.888) 24,84 (.978) 15,82 (.623) 22,10 (.870) 15,24 (.600) 16,51(.650) 19,33 (.761) High Power 8,89 (.350) 10,16 (.400) High Power Contact Contact 9,09 (.358) 16,56 (.652) 2,84 2,36 4,37 (.112) (.093) (.172) Mounting Hole 2,54 3,81 Mounting Hole (.100)(.150) 20,57 (.810) 20,57 (.810) 11,10 (.437) Signal Contact 8,64 (.340) 8,64 (.340) 11,53 (.454) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) HCigohn Ptaocwter 15,70 (.618) 15,70 (.618) HiCgho nPtaocwter 11,05 (.435) 8,71 (.343) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218) 2,84 (.112) 5,54(.218) 2,84 (.112) Mounting Mounting Hole Hole Signal 2,80 (.110) Signal 2,80 (.110) 8,64 (.340) Contact 8,28 (.326) 11,53 (.454) 20,57 (.810) 8,64 (.340) Contact 8,28 (.326) 11,53 (.454) 20,57 (.810) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) High Power 13,82 (.544) Contact 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) R 5,54(.218)5,54(.218) 5,54(.218) e 2,84 (.112) Mounting Hole a d SCiognntaalct 28,,8208 ((..131206)) 11,53 (.454) e 8,64 (.340) 6,91 (.272) 6,91 (.272) 20,57 (.810) r 9,68 (.381) 9,68 (.381) ’ REAR FLANGE REF 12,42 (.489) REAR FLANGE REF s 15,19 (.598) 17,96 (.707) Shell Size C C R Contact Arrangement 25W3 Signal Contact X Recommended PCB Hole X 27W2 No. of Size 20 Cavities 22 #20 25 #20 e No. of Size 8 Cavities 3 #8 0,76 (.030) 1,14 (.045) 2 #8 s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c High Power (H) 3,56 (.140) e Dimensions are shown in mm (inch) Dimensions subject to change 245

° PCB Hole Pattern — Standard High Power 90 — Plug 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 20,57 (.810) 20,57 (.810) 13,72 (.540) 12,42 (.489) 13,72 (.540) 13,72 (.540) HPoigwher High 9,68 (.381) 6,86 (.270) 6,86 (.270) Contact CPoonwtaecrt 6,86 (.270) 6,91 (.272) 4,14 (.163) 2,84 (.112) Signal Contact 20,57 (.810) MoHuonlteing MoHuonlteing CSoignntaaclt 22,,8844 ((..111122)) 5,54(.218) 5,54(.218) 11,53 (.454) 5,54(.218)5,54(.218) 10,06 20,57 (.810) 5,54(.218)5,54(.218) 11,53 (.454) 8,28 (.326) 8,28 (.326) 10,06 (.396) (.396) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 20,57 (.810) 17,96 (.707) 20,57 (.810) 15,19 (.598) 13,72 (.540) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) High Power High Power 6,91 (.272) 6,91 (.272) Contact 6,91 (.272) 6,91 (.272) Contact 8,28 (.326) 8,28 (.326) 2,80 (.110) 2,80 (.110) 2,84 (.112) Signal Contact MHooluenting 2,84 (.112) CSoignntaaclt MoHuonlteing 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 11,53 (.454) 8,258, 5(.43(2.261)8)5.584,2(.82 1(.83)26) 20,57 (.810) 10,06 (.396) 11,53 (.454) 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 20,57 (.810) 10,06 (.396) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) e 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) c r u Shell Size D D o Contact Arrangement 43W2 47W1 s No. of Size 20 Cavities 41#20 46 #20 No. of Size 8 Cavities 2 #8 1#8 e R s ’ Signal Contact X Recommended PCB Hole X r 0,76 (.030) 1,14 (.045) e Mounting Type Recommended PCB Hole X d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R High Power (H) 3,56 (.140) Dimensions are shown in mm (inch) 246 Dimensions subject to change

° PCB Hole Pattern — Standard High Power 90 — Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) (5.2,4196) (5.2,4196) (6.2,8760) (6.2,8760) (6.2,8760) (6.2,8760) SCiognntaalct HCiognht aPcotwer (2.1,1824) MHooluenting HCiognht aPcotwer 2(.08,1507) MHooluenting HCiognht aPcotwer 2,74 (.108) 2,84 (.112) MHooluenting 2(.08,1507) Signal 5,49 2(.08,1507) (8.3,6440) (8.3,2234) 11,53 (.454) (8.3,6440) (8.3,6440) Contact (.216) 11,53 (.454) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 6,86 (.270) (.270) 8,23 (.324) 2,84 High Power MoHuonlteing CSoignntaaclt HiCgho nPtaocwter (.112) (2.08,1507) MoHuonlteing 5,94 (.203,846) (.073,46)7 (.302) Contact 5,49 5,49 (8.3,6440) (.216) (.216) 11,53 (.454) 20,57 (.810) 8,64 (.340) REAR FLANGE REF 8,23(.324) 8,23(.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 14,48 (.570) 47,04 (1.852) 8,28 (.326) 14,48 (.570) 14,48 (.570) 14,48 (.570) 5,54(.218) 7,77 (.306) 8,28 (.326) 7,77 (.306) 5,54(.218) Mounting (2.1,1824) HiCgho nPtaocwter MoHuonlteing (2.1,1824) 5,54(.218) HigCho nPtoawcter Hole CSoingtnaaclt (4.1,1643) 11,53 (.454) CSonigtnaactl 2,80 (.11(4.01,)1643) 11,53 (.454) 20,57 (.810) 6,91 (.272) 8,64 (.340) 20,57 (.810) 6,91 (.272) 8,64 (.340) 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) R 5,54(.218)5,54(.218) e a CSoignntaaclt 2,84 MHooluenting HCigohn Ptaocwter (.112) d e 20,57 (.810) r 8,28 (.326) ’ 8,64 (.340) 6,91 (.272) 6,91 (.272) 11,53 (.454) s 9,68 (.381) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 12,42 (.489) REAR FLANGE REF 15,19 (.598) 15,19 (.598) R Shell Size B B Contact Arrangement 17W2 Signal Contact X Recommended PCB Hole X 21W1 e No. of Size 20 Cavities 15 #20 0,76 (.030) 1,14 (.045) 20 #20 s No. of Size 8 Cavities 2 #8 1#8 Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c High Power (H) 3,56 (.140) e Dimensions are shown in mm (inch) Dimensions subject to change 247

° PCB Hole Pattern — Standard High Power 90 — Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,56 (.888) 22,86 (.900) 22,86 (.900) 22,10 (.870) 16,51(.650) 15,24 (.600) 15,82 (.623) 19,33 (.761) 10,16 (.400) 8,89 (.350) HCigohn Ptaocwter 16,56 (.652) 9,09 (.358) HCigohn Ptaocwter (2.1,1824) (4.1,3772) (2.0,3963) 3,81 2,54 Mounting Hole Mounting Hole (.150) (.100) 11,10 (.437) 20,57 (.810) 20,57 (.810) Signal Contact 8,64 (.340) 11,53 (.454) 8,64 (.340) REAR FLANGE REF REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) High Power 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) High Power Contact Contact 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218)5,54(.218) 2,84 (.112) 5,54(.218) 5,54(.218) 2,84 (.112) Mounting Mounting Hole Hole 20,57 (.810) 2,80 (.110) Signal 2,80 (.110) 11,53 (.454) 8,28 (.326) CSoignntaaclt 8,64 (.340) 8,64 (.340) Contact 8,28 (.326) 11,53 (.454) 20,57 (.810) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) High Power Contact 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) e Mounting 2,84 (.112) 5,54(.218) c Hole r u 2,80 (.110) o 20,57 (.810) 11,53(.454) 6,91 (.287,228) (.362,69)1 (.272) CSoignntaaclt 8,64 (.340) s 9,68 (.381) 9,68 (.381) e REAR FLANGE REF 12,42 (.489) REAR FLANGE REF 15,19 (.598) R 17,96 (.707) Shell Size C C Contact Arrangement 25W3 27W2 s No. of Size 20 Cavities 22 #20 25 #20 ’ No. of Size 8 Cavities 3 #8 Signal Contact X Recommended PCB Hole X 2 #8 r 0,76 (.030) 1,14 (.045) e Mounting Type Recommended PCB Hole X d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R High Power (H) 3,56 (.140) Dimensions are shown in mm (inch) 248 Dimensions subject to change

° PCB Hole Pattern — Standard High Power 90 — Receptacle 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 13,72 (.540) High 12,42 (.489) 13,72 (.540) Power 9,68 (.381) High Power 6,86 (.270) 6,86 (.270) Contact 6,91 (.272) 6,86 (.270) Contact 4,14 (.163) 2,84 (.112) Signal Signal Contact 20,57 (.810) MoHuonlteing 2,84 (.112) Contact MHooluenting 2,84 (.112) 5,54(.218) 5,54(.218) 11,53 (.454) 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 10,06 (.396) 11,53 (.454) 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 20,57 (.810) 10,06 (.396) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 20,57 (.810) 17,96 (.707) 20,57 (.810) 17,96 (.707) 13,72 (.540) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) High Power 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) Contact High Power 6,91 (.272) 6,91 (.272) Contact 6,91 (.272) 6,91 (.272) 8,28 (.326) 8,28 (.326) 2,80 (.110) 2,80 (.110) Signal Mounting Signal Contact 2,84 (.112) Mounting Contact 2,84 (.112) Hole Hole 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 20,57 (.810) 5,54(.218)5,54(.218) 11,53 (.454) 20,57 (.810) 5,54(.218)5,54(.218) 11,53 (.454) 10,06 (.396) 8,28 (.326) 8,28 (.326) 10,06 (.396) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) R Shell Size D D e Contact Arrangement 43W2 47W1 a No. of Size 20 Cavities 41#20 46 #20 No. of Size 8 Cavities 2 #8 1#8 d e r ’ s R Signal Contact X Recommended PCB Hole X e 0,76 (.030) 1,14 (.045) s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c High Power (H) 3,56 (.140) e Dimensions are shown in mm (inch) Dimensions subject to change 249

° PCB Hole Pattern — European High Power 90 — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 5,49 5,49 6,86 (.270)6,86 (.270) 6,86 (.270)6,86 (.270) SCiognntaalct (.216) (.216) (2.1,5040 ) MHooluenting HCiognht aPcotwer MHooluenting HCiognht aPcotwer 2,74 (.108) MHooluenting 2,54 (.100) High Power 1(.04,2990) C8o,2n3ta (c.3t24) 9,40 (.370) (1.04,2990) 11,94 (.470) (1.04,2990) (5.2,4196) SCiognntaalct9,40 (.370) REAR FLANGE REAR FLANGE REAR FLANGE REAR FLANGE REAR FLANGE REAR FLANGE REF REF REF REF REF REF Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 7,67 (.302) 9,60 (.378) 9,60 (.378) 5,94 (.234) 6,86 (.270)6,86 (.270) HCiognht aPcotwer 0,86 (.034) Mounting SCiognntaalct 8,23 (.324) 2(.,15040 ) MHooluenting Hole High Power Contact 1(.04,2990) 8,23( 5.(2.,3412964))8(5.,22,41396 ().324) 9,40 (.370) 10,90 (.429) 11,94 (.470) REAR FLANGE REAR FLANGE REF REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 7,77 (.306) 8,28 (.326) 8,28 (.326) HCiognht aPcotwer 5,54(.218) Mounting HCiognht aPcotwer 5,54(.218) Mounting Hole 5,54(.218) Hole 10,90 (.429) Signal 10,90 (.429) 2,80 (.110) Signal 9,40 (.370) 4,14 (.163) Contact 11,94 (.470) 9,40 (.370) 4,14 (.163) Contact 11,94 (.470) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1,852) 47,04 (1.853) e 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) c 11,05 (.435) 11,05 (.435) u r HCiognht aPcotwer 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) Mounting MHooluenting SCiognntaalct 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 5,54(.218) Hole o 2,54 (.100) s e 10,90 (.429) 9,40 (.370) 28,,8208 ((..131206)) SCiognntaalct 11,94 (.470) 10,90 (.429) HC8iog,2nh8t aP (c.ot3w2e6r) 9,40 (.370) R 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 12,42 (.489) s 15,19 (.598) 15,19 (.598) ’ Shell Size B Signal Contact X Recommended PCB Hole X B r Contact Arrangement 17W2 0,60 (.024) 1,00 (.039) 21W1 e NNoo.. ooff SSiizzee 280 C Cavaivtiiteises 152 ##280 Mounting Type Recommended PCB Hole X 201 ##820 d Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R High Power (P) 3,28 (.129) Dimensions are shown in mm (inch) 250 Dimensions subject to change

° PCB Hole Pattern — European High Power 90 — Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,56 (.888) 19,33 (.761) 22,86 (.900) 22,86 (.900) 15,82 (.623) 16,56 (.652) 15,24 (.600) 16,51(.650) 8,89 (.350) 10,16 (.400) 9,09 (.358) 11,10 (.437) HCiognht aPcotwer 2,54 (.100) 3,81 (.150) Mounting Hole HCiognht aPcotwer 2,36 (.093) 4,37 (.172) Mounting Hole 2,54 (.100) 10,90 (.429) 11,94 (.470) 10,90 (.429) 11,94 (.470) SCiognntaalct 9,40 (.370) REAR FLANGE REF REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 11,05 (.435) 8,71 (.343) 11,05 (.435) 11,05 (.435) HCiognht aPcotwer 8,258, 5(.43(2.261)8) Mounting HCiognht aPcotwer 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) 5,54(.218) Hole 5,54(.218) MHooluenting 2,80 (.110) 11,94 (.470) 2,80 (.110) 11,94 (.470) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) Contact Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) HCiognht aPcotwer 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) Mounting HCiognht aPcotwer 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) Mounting R 5,54(.218) Hole 5,54(.218) Hole e a 10,90 (.429) Signal 28,,8208 ((..131206)) 9,40 (.370)11,94 (.470) 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370) 11,94 (.470) d Contact e 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF r 12,42 (.489) 12,42 (.489) 12,42 (.489) ’ 15,19 (.598) 15,19 (.598) 15,19 (.598) s 17,96 (.707) Shell Size C C R Contact Arrangement 25W3 27W2 No. of Size 20 Cavities 22 #20 Signal Contact X Recommended PCB Hole X 25 #20 e No. of Size 8 Cavities 3 #8 0,60 (.024) 1,00 (.039) 2 #8 s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c High Power (P) 3,28 (.129) e Dimensions are shown in mm (inch) Dimensions subject to change 251

° PCB Hole Pattern — European High Power 90 — Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 6,86 (.270)6,86 (.270) 6,86 (.270)6,86 (.270) SCiognntaalct (5.2,4196) (5.2,4196) (2.1,5040 ) MHooluenting HCiognht aPcotwer MHooluenting HCiognht aPcotwer 2,74 (.108) MHooluenting 2,54 (.100) 1(.04,2990) HC8io,g2nh3t a P(c.o3tw24e)r 9,40 (.370) (1.04,2990) 11,94 (.470) (1.04,2990) (5.2,4196) SCiognntaalct9,40 (.370) RREEAFR FLANGE RREEAFR FLANGE RREEAFR FLANGE RREEAFR FLANGE RREEAFR FLANGE RREEAFR FLANGE Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 5,94 (.234) 7,67 (.302) 9,60 (.378) 9,60 (.378) 6,86 (.270)6,86 (.270) 0,86 (.034) High Power SCiognntaalct 8,23 (.324) 2(.,15040 ) MHooluenting MHooluenting Contact High Power Contact 10,90 (.429) (5.2,4196) (5.2,4196) 9,40 (.370) 10,90 (.429) 8,23 (.324)8,23 (.324) 11,94 (.470) REAR FLANGE REAR FLANGE REF REF REAR FLANGE REF REAR FLANGE REF Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 7,77 (.306) 8,28 (.326) 8,28 (.326) MHooluenting 5,54(.218) HCiognht aPcotwer MHooluenting 5,54(.251,584)(.218) HCiognht aPcotwer Signal 10,90 (.429) Signal 2,80 (.110) 10,90 (.429) 11,94 (.470) Contact 4,14 (.163) 9,40 (.370) 11,94 (.470) Contact 4,14 (.163) 9,40 (.370) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1,852) 47,04 (1.853) e 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) c 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) r 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) u HCiognht aPcotwer 5,54(.218)5,54(.218) Mounting MHooluenting SCiognntaalct 5,54(.218)5,54(.218) 5,54(.218) Hole o 2,54 (.100) s High Power e 10,90 (.429) 2,80 (.110) Signal 11,94 (.470) Contact R 9,40 (.370) 8,28 (.326) Contact 10,90 (.429) 8,28 (.326) 9,40 (.370) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF s 12,42 (.489) 12,42 (.489) ’ Signal Contact X Recommended PCB Hole X 15,19 (.598) 15,19 (.598) r Shell Size B 0,60 (.024) 1,00 (.039) B Contact Arrangement 17W2 21W1 e No. of Size 20 Cavities 15 #20 Mounting Type Recommended PCB Hole X 20 #20 d No. of Size 8 Cavities 2 #8 1#8 Without Boardlock 3,05 (.120) a With Boardlock 3,10 (.122) e Size 8 Contact Type Recommended PCB Hole X R High Power (P) 3,28 (.129) Dimensions are shown in mm (inch) 252 Dimensions subject to change

° PCB Hole Pattern — European High Power 90 — Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,86 (.900) 22,86 (.900) 19,33 (.761) 22,56 (.888) 16,51(.650) 15,24 (.600) 16,56 (.652) 15,82 (.623) 10,16 (.400) 8,89 (.350) 11,10 (.437) 9,09 (.358) Mounting Hole 3,81 (.150) 2,54 (.100) High Power 4,37 (.172) 2,36 (.093) HCiognht aPcotwer Contact Mounting Hole 2,54 (.100) 11,94 (.470) 10,90 (.429) 9,40 (.370) Signal 11,94 (.470) 10,90 (.429) Contact REAR FLANGE REF REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) Mounting 5,584,(2.281 (8.3)26) HCiognht aPcotwer HCiognht aPcotwer 8,258, 5(.43(2.261)8)5,584,2(.82 1(.83)26) Mounting Hole 5,54(.218) 5,54(.218) Hole 11,94 (.470) 2,80 (.110) 2,80 (.110) 11,94 (.470) 9,40 (.370) 8,28 (.326) Signal 10,90 (.429) 10,90 (.429) Signal 8,28 (.326) 9,40 (.370) 6,91 (.272) Contact Contact 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) High Power High Power 8,28 (.326) 8,28 (.326) R MHooluenting 5,54(.52,1584)(.52,1584)(.218) Contact Contact 5,54(.52,1584)(.52,1584)(.218) MHooluenting e a d 11,94 (.470) 2,80 (.110) Signal 2,80 (.110) 11,94 (.470) 9,40 (.370) 8,28 (.326) Signal 10,90 (.429) 10,90 (.429) Contact 8,28 (.326) 9,40 (.370) e Contact 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) r REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF ’ 12,42 (.489) 12,42 (.489) 12,42 (.489) s 15,19 (.598) 15,19 (.598) 15,19 (.598) 17,96 (.707) R Shell Size C C Contact Arrangement 25W3 Signal Contact X Recommended PCB Hole X 27W2 e No. of Size 20 Cavities 22 #20 0,60 (.024) 1,00 (.039) 25 #20 No. of Size 8 Cavities 3 #8 2 #8 s Mounting Type Recommended PCB Hole X o Without Boardlock 3,05 (.120) u With Boardlock 3,10 (.122) r Size 8 Contact Type Recommended PCB Hole X c High Power (P) 3,28 (.129) e Dimensions are shown in mm (inch) Dimensions subject to change 253

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug 33,32 (1.312) 33,32 (1.312) 25,00 (.984) 5,49 5,49 (6.2,8760) (6.2,8760) (6.2,8760) (6.2,8760) CSiognntaalct (.216) (.216) 2,84 (.112) HCHioiggnhht aVPcootlwtaegr/e 2,74 (.108) HCHioiggnhht aVPcootlwtaegr/e 2,84 (.112) MoHuonlteing HHiigghh VPoolwtaegre/ MoHuonlteing MoHuonlteing CSoingtnaaclt (5.2,4196) Contact 8,23 (.324) Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 7,67 (.302) 5,94 (.234) 8,23 (.324) 2,84 0,86 (.112) (.034) MoHuonlteing CSoignntaaclt (5.2,4196) (5.2,4196) HCHioiggnhht aVPcootlwtaegr/e MoHuonlteing High Power/High Voltage 8,23 (.324)8,23 (.324) Contact Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 8,28 (.326) 7,77 (.306) 8,28 (.326) 5,54(.218) 5,54(.218) Signal 2,84 (.112) 5,54(.218) Contact 2,84 (.112) Mounting 2,80 (.110) MoHuonlteing HHiigghh VPoolwtaegr/e4,14 (.163) SCiognntaalct Hole HHiigghh VPoolwtaegr/e 4,14 (.163) Contact Contact 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) e 47,04 (1.852) 16,56 (.652) 16,56 (.652) c 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) r 11,05 (.435) 11,05 (.435) u 8,28 (.326) 8,28 (.326) High Power/ 8,28 (.326) 8,28 (.326) o 5,54(.52,1584)(.52,1584)(.218) HCiognht aVcotltage 2,84 (.112) SCiognntaalct 5,54(.218)5,54(.218) 2,84 (.112) s e R Signal 2,80 (.110) Mounting Hole HHiigghh VPoolwtaegr/e Mounting Hole Contact 8,28 (.326) 8,28 (.326) Contact 6,91 (.272) 6,91 (.272) Signal Contact X Recommended PCB Hole X 6,91 (.272) 6,91 (.272) s 9,68 (.381) 9,68 (.381) 0,60 (.024) 1,00 (.039) 9,68 (.381) 9,68 (.381) 0,76 (.030) 1,14 (.045) 12,42 (.489) 12,42 (.489) ’ 15,19 (.598) 15,19 (.598) r Mounting Type Recommended PCB Hole X Shell Size B B e Contact Arrangement 17W2 Without Boardlock 3,05 (.120) 21W1 d No. of Size 20 Cavities 15 #20 With Boardlock 3,10 (.122) 20 #20 No. of Size 8 Cavities 2 #8 1#8 a Size 8 Contact Type Recommended PCB Hole X e High Power (H) 3,56 (.140) R High Voltage (V) 1,96 (.077) Dimensions are shown in mm (inch) 254 Dimensions subject to change

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug 63,50 (2.500) 63.50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 22,56 (.888) 16,56 (.652) 15,24 (.600) 16,51(.650) 15,82 (.623) 8,89 (.350) 10,16 (.400) High Power/ 9,09 (.358) 11,10 (.437) High Voltage High Power/ Contact High Voltage 2,54 (.100) 3,81 (.150) Mounting 2,36 (.093) 4,37 (.172) Contact Hole 2,84 (.112) Mounting Signal Hole Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,71 (.343) High Power/ 8,28 (.326) High Power/ 8,28 (.326) 8,28 (.326) High Voltage 5,54(.218) High Voltage 5,54(.218)5,54(.218) Contact 5,54(.218) (2.1,8142 ) Contact 5,54(.218) (2.1,8142 ) 2,80 (.110) 2,80 (.110) Mounting Hole Signal Mounting Hole Signal Contact 8,28 (.326) Contact 8,28 (.326) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) HCHioiggnhht aVPcootlwtaegr/e 8,258,5 (4.3(.2526,15)84)(.52,15884),(2.281 (8.3)26) (2.1,8142 ) HCHioiggnhht aVPcootlwtaegr/e SCiognntaalct 8,258, 5(.43(2.526,1)584)(.52,15884,)2(.82 1(.83)26) (2.1,8142) R e a d 2,80 (.110) 2,80 (.110) Mounting Hole SCiognntaalct 8,28 (.326) Mounting Hole 8,28 (.326) e 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) r 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) ’ 12,42 (.489) 12,42 (.489) 12,42 (.489) s 15,19 (.598) Signal Contact X Recommended PCB Hole X 15,19 (.598) 15,19 (.598) 17,96 (.707) 0,60 (.024) 1,00 (.039) R Shell Size C C 0,76 (.030) 1,14 (.045) Contact Arrangement 25W3 27W2 e No. of Size 20 Cavities 22 #20 Mounting Type Recommended PCB Hole X 25 #20 s No. of Size 8 Cavities 3 #8 2 #8 Without Boardlock 3,05 (.120) o With Boardlock 3,10 (.122) u Size 8 Contact Type Recommended PCB Hole X r High Power (H) 3,56 (.140) c High Voltage (V) 1,96 (.077) e Dimensions are shown in mm (inch) Dimensions subject to change 255

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 12,42 (.489) 13,72 (.540) 13,72 (.540) 9,68 (.381) 6,86 (.270) 6,86 (.270) HCHioiggnhht aVPcootlwtaegr/e 6,86 (.270) 6,91 (.272) HHiigghh VPoolwtaegr/e 4,14 (.163) Contact Mounting Mounting Hole Hole 2,84 (.112) 1,42 (.056) 1,42 (.056) 2,84 (.112) 2,84 (.112) 2,84 (.112) 5,54(.218) Signal Contact 5,54(.218) 5,54(.218)5,54(.218) Signal Contact 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 20,57 (.810) 17,96 (.707) 20,57 (.810) 15,19 (.598) 13,72 (.540) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) High Power/ 6,91 (.272) 6,91 (.272) High Power/ High Voltage High Voltage 8,28 (.326) Contact 8,28 (.326) Contact 2,80 (.110) MHooluenting 2,80 (.110) MHooluenting 2,84 (.112) 1,42 (.056) 2,84 (.112) 1,42 (.056) 2,84 (.112) 2,84 (.112) 5,54(.218) Signal Contact 5,54(.218) Signal Contact 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) e c Shell Size D D r Contact Arrangement 43W2 47W1 u No. of Size 20 Cavities 41#20 46 #20 No. of Size 8 Cavities 2 #8 1#8 o s e R Signal Contact X Recommended PCB Hole X 0,60 (.024) 1,00 (.039) s 0,76 (.030) 1,14 (.045) ’ r Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) d With Boardlock 3,10 (.122) a Size 8 Contact Type Recommended PCB Hole X e High Power (H) 3,56 (.140) R High Voltage (V) 1,96 (.077) Dimensions are shown in mm (inch) 256 Dimensions subject to change

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle 33,32 (1.312) 33,32 (1.312) 25,00 (.984) CSiognntaalct (5.2,4196) (5.2,4196) 2,84 (.112) (6.2,8760) (6.2,8760) HCHioiggnhht aVPcootlwtaegr/e (6.2,87260,)74 (.1(6.02,887)60) HCHioiggnhht aVPcootlwtaegr/e 2,84 (.112) MoHuonlteing HHiigghh VPoolwtaegre/ MoHuonlteing MoHuonlteing CSoingtnaaclt (5.2,4196) Contact 8,23 (.324) Shell Size E A A Contact Arrangement 5W1 3W3 7W2 No. of Size 20 Cavities 4 #20 0 #20 5 #20 No. of Size 8 Cavities 1#8 3 #8 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 7,67 (.302) 5,94 (.234) 8,23 (.324) 2,84 0,86 (.112) (.034) MoHuonlteing CSoignntaaclt (5.2,4196) (5.2,4196) HCHioiggnhht aVPcootlwtaegr/e MoHuonlteing High Power/High Voltage 8,23 (.324)8,23 (.324) Contact Shell Size A B Contact Arrangement 11W1 5W5 No. of Size 20 Cavities 10 #20 0 #20 No. of Size 8 Cavities 1#8 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 8,28 (.326) 7,77 (.306) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 5,54(.218) (.112) SCiognntaalct 4,14 (.163) HCHioiggnhht aVPcootlwtaegr/e MoHuonlteing 4,124,8 (0.1 (6.131)0)SCiognntaalct HCHioiggnhht aVPcootlwtaegr/e MHooluenting 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 4 #8 3 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) R 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) e 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) High Power/ 8,28 (.326) 8,28 (.326) a 5,54(.52,1584)(.52,1584)(.218) HCiognht aVcotltage 2,84 (.112) SCiognntaalct 5,54(.218)5,54(.218) 2,84 (.112) d e r Mounting Hole SCiognntaalct 28,,8208 ((..131206)) Mounting Hole 8,28 (.326) HCHioiggnhht aVPcootlwtaegr/e ’ s 6,91 (.272) 6,91 (.272) Signal Contact X Recommended PCB Hole X 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 0,60 (.024) 1,00 (.039) R 12,42 (.489) 12,42 (.489) 0,76 (.030) 1,14 (.045) 15,19 (.598) 15,19 (.598) e SChoneltla Scti zAerrangement 17BW2 Mounting Type Recommended PCB Hole X 21BW1 s No. of Size 20 Cavities 15 #20 Without Boardlock 3,05 (.120) 20 #20 o No. of Size 8 Cavities 2 #8 With Boardlock 3,10 (.122) 1#8 u Size 8 Contact Type Recommended PCB Hole X r High Power (H) 3,56 (.140) c High Voltage (V) 1,96 (.077) e Dimensions are shown in mm (inch) Dimensions subject to change 257

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle 63,50 (2.500) 63.50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,56 (.652) 22,56 (.888) 16,51(.650) 15,24 (.600) 15,82 (.623) 10,16 (.400) 8,89 (.350) 11,10 (.437) 9,09 (.358) High Power/ High Voltage MHooluenting 3,81 (.150) 2,54 (.100) HCHioiggnhht aVPcootlwtaegr/e (2.1,8142 ) 4,37 (.172) 2,36 (.093) Contact Mounting Signal Hole Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C C Contact Arrangement 8W8 13W6 No. of Size 20 Cavities 0 #20 7 #20 No. of Size 8 Cavities 8 #8 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 11,05 (.435) (2.1,8142 ) 5,54(.52,15884),(2.281 (8.3)26) HCHioiggnhht aVPcootlwtaegr/e HCHioiggnhht aVPcootlwtaegr/e 8,258, 5(.43(2.526,1)584)(.52,15884,)2(.82 1(.83)26) (2.1,8142 ) 28,,8208 ((..131206)) SCiognntaalct Mounting Hole Mounting Hole SCiognntaalct 28,,8208 ((..131206)) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 5 #8 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) High Power/ High Power/ 8,28 (.326) 8,28 (.326) e (2.1,8142 ) 5,54(.52,1584)(.52,1584)(.218) HCiognht aVcotltage HCiognht aVcotltage SCiognntaalct 5,54(.52,1584)(.52,1584)(.218) (2.1,8142) c r 2,80 (.110) 2,80 (.110) u 8,28 (.326) SCiognntaalct Mounting Hole Mounting Hole 8,28 (.326) o 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) s 12,42 (.489) 12,42 (.489) 12,42 (.489) e 15,19 (.598) 15,19 (.598) 15,19 (.598) 17,96 (.707) R Shell Size C C Contact Arrangement 25W3 Signal Contact X Recommended PCB Hole X 27W2 No. of Size 20 Cavities 22 #20 25 #20 s No. of Size 8 Cavities 3 #8 0,60 (.024) 1,00 (.039) 2 #8 ’ 0,76 (.030) 1,14 (.045) r Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) d With Boardlock 3,10 (.122) a Size 8 Contact Type Recommended PCB Hole X e High Power (H) 3,56 (.140) R High Voltage (V) 1,96 (.077) Dimensions are shown in mm (inch) 258 Dimensions subject to change

PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 20,57 (.810) 20,57 (.810) 15,19 (.598) 12,42 (.489) 13,72 (.540) 13,72 (.540) 13,72 (.540) 6,86 (.270) 6,86 (.270) HCHioiggnhht aVPcootlwtaegr/e 9,668, 9(.13 8(.12)72) 6,86 (.270) High Power/ High Voltage Mounting 4,14 (.163) Contact Mounting Hole 2,84 (.112) Hole 1,42 (.056) 2,84 (.112) 1,42 (.056) 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) Signal Contact 5,54(.218)5,54(.218) Signal Contact 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 7 #8 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 20,57 (.810) 17,96 (.707) 20,57 (.810) 17,96 (.707) 13,72 (.540) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) HCHioiggnhht aVPcootlwtaegr/e 6,91 (.287,228) (.362,69)1 (.272) HCHioiggnhht aVPcootlwtaegr/e 6,91 (.82,7228) (.3266,9)1 (.272) MHooluenting 2,80 (.110) MHooluenting 2,80 (.110) 1,42 (.056) 2,84 (.112) 1,42 (.056) 2,84 (.112) 2,84 (.112) 2,84 (.112) Signal Contact 5,54(.218) Signal Contact 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) R 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) 30,56 (1.203) e a Shell Size D D Contact Arrangement 43W2 47W1 d No. of Size 20 Cavities 41#20 46 #20 e No. of Size 8 Cavities 2 #8 1#8 r ’ s Signal Contact X Recommended PCB Hole X 0,60 (.024) 1,00 (.039) R 0,76 (.030) 1,14 (.045) e Mounting Type Recommended PCB Hole X s Without Boardlock 3,05 (.120) o With Boardlock 3,10 (.122) u Size 8 Contact Type Recommended PCB Hole X r High Power (H) 3,56 (.140) c High Voltage (V) 1,96 (.077) e Dimensions are shown in mm (inch) Dimensions subject to change 259

° PCB Hole Pattern — European 90 PC Tails — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 9,60 (.378) 9,60 (.378) Mounting 6,86 (.270) 6,86 (.270) SCiognntaalct 5,49(.216)5,49(.216)2,54(.100) MHooluenting 2,74 (.108) Hole CSoignntaaclt 8,23 (.324) 2,54(.100) MoHuonlteing 2,54 (.100) 10,90 (.429) 8,23 (.324) 9,40 (.370) 10,90 (.429) 5,49(.216) CSoignntaaclt 9,40 (.370) 10,90 (.429) 5,49(.216)5,49(.216) 9,40 (.370) 8,23 (.324) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 7W2 11W1 No. of Size 20 Cavities 4 #20 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) MoHuonlteing 5,54(.218) MHooluenting 2,54 (.100) 5,54(.218) 2,54 (.100) 10,90 (.429) Signal 10,90 (.429) 2,80 (.110) Signal 9,40 (.370) 4,14 (.163) Contact 9,40 (.370) 4,14 (.163) Contact 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) MHooluenting Signal 5,54(.218)5,54(.218) MHooluenting Contact e 5,54(.218) 2,54 (.100) 2,54 c (.100) u r 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370) 10,90 (.429) 8,28 (.326) 9,40 (.370) o 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF s 12,42 (.489) 12,42 (.489) e 15,19 (.598) 15,19 (.598) R Shell Size B B Contact Arrangement 17W2 21W1 No. of Size 20 Cavities 15 #20 20 #20 s No. of Size 8 Cavities 0 #8 0 #8 ’ r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 260 Dimensions subject to change

° PCB Hole Pattern — European 90 PC Tails — Plug 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) Mounting 2,54(.100) Hole 10,90 (.429) Signal 9,40 (.370) Contact REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C Contact Arrangement 13W6 No. of Size 20 Cavities 7 #20 No. of Size 8 Cavities 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,258, 5(.43(2.261)8) Mounting 5,54(.218)5,54(.218) MoHuonlteing 5,54(.218) 2,54 (.100) Hole 5,54(.218) 2,54 (.100) 2,80 (.110) 1R0E,9A0R ( .F4L2A9)NGE REF SCiognntaalct 9,668, 9(.13 8(.1228)7,,82208) ((..131206)) 9,40 (.R3E70A)R FLANGE REF 1R0,E9A0 R(. 4F2L9A)NGE REF SCiognntaalct 9,668, 9(.13 8(.128)7,228) (.362,9691), 6(.82 7(.23)81) R9E,4A0R ( .F3L7A0)NGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 0 #8 0 #8 R e a d e r ’ Shell Size C C s Contact Arrangement 25W3 27W2 No. of Size 20 Cavities 22 #20 25 #20 No. of Size 8 Cavities 0 #8 0 #8 R e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 261

° PCB Hole Pattern — European 90 PC Tails — Plug 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) MoHuonlteing 4,14 (.1623,8)4 (.112) Signal Contact 2,54 (.100) 2,54 (.100) 9,40 (.370) 1(.24,8237) 5,54(.218) 9,40 (.370) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 0 #8 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 8,28 (.326) Mounting 8,28 (.326) 2,80 (.110) Hole 2,80 (.110) Signal Contact Mounting Hole Signal Contact 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 9,40 (.370) 5,54(.218) 12,27 (.483) 9,40 (.370) 5,54(.218) 12,27 (.483) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) e 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) c 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) r u o Shell Size D D Contact Arrangement 43W2 47W1 s No. of Size 20 Cavities 41#20 46 #20 e No. of Size 8 Cavities 0 #8 0 #8 R s ’ r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 262 Dimensions subject to change

° PCB Hole Pattern — European 90 PC Tails — Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 9,60 (.378) 9,60 (.378) Mounting 6,86 (.270) 6,86 (.270) SCiognntaalct 5,49(.216)5,49(.216)2,54(.100) MHooluenting 2,74 (.108) Hole CSoignntaaclt 8,23 (.324) 2,54(.100) MoHuonlteing 2,54 (.100) 10,90 (.429) 8,23 (.324) 9,40 (.370) 10,90 (.429) 5,49(.216) CSoignntaaclt 9,40 (.370) 10,90 (.429) 5,49(.216)5,49(.216) 9,40 (.370) 8,23 (.324) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size E A A Contact Arrangement 5W1 7W2 11W1 No. of Size 20 Cavities 4 #20 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) MoHuonlteing 2,54 (.100) 5,54(.218) MHooluenting 2,54 (.100) 5,54(.52,1584)(.218) CSoingtnaaclt 4,14 (.163) 9,40 (.370) 10,90 (.429) SCiognntaalct 2,80 (.1140,)14 (.163) 9,40 (.370) 10,90 (.429) 6,91 (.272) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Mounting 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Hole Signal 5,54(.218)5,54(.218) MHooluenting 5,54(.218) 2,54 (.100) Contact 2,54 (.100) R 10,90 (.429) SCiognntaalct 28,,8208 ((..131206)) 9,40 (.370) 10,90 (.429) 8,28 (.326) 9,40 (.370) e 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) a REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF d 12,42 (.489) 12,42 (.489) e 15,19 (.598) 15,19 (.598) r Shell Size B B ’ Contact Arrangement 17W2 21W1 s No. of Size 20 Cavities 15 #20 20 #20 No. of Size 8 Cavities 0 #8 0 #8 R e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 263

° PCB Hole Pattern — European 90 PC Tails — Receptacle 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) Mounting Hole 2,54(.100) 9,40 (.370) Signal 10,90 (.429) Contact REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size C Contact Arrangement 13W6 No. of Size 20 Cavities 7 #20 No. of Size 8 Cavities 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) MoHuonlteing 5,54(.218) 5,54(.218)5,54(.218) MoHuonlteing 2,54 (.100) 5,54(.218) 5,54(.218) 2,54 (.100) 2,80 (.110) 2,80 (.110) 9,40 (.370) 8,28 (.326) SCiognntaalct 10,90 (.429) 10,90 (.429) SCiognntaalct 8,28 (.326) 9,40 (.370) 6,91 (.272) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 0 #8 0 #8 63,50 (2.500) 16,56 (.652) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Mounting Hole 5,54(.218)5,54(.218) 2,54 (.100) 5,54(.218) e c 2,80 (.110) r 9,40 (.370) 8,28 (.326) SCiognntaalct 10,90 (.429) 6,91 (.272) 6,91 (.272) u REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF o 12,42 (.489) 15,19 (.598) s 17,96 (.707) e Shell Size C C R Contact Arrangement 25W3 27W2 No. of Size 20 Cavities 22 #20 25 #20 No. of Size 8 Cavities 0 #8 0 #8 s ’ r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 264 Dimensions subject to change

° PCB Hole Pattern — European 90 PC Tails — Receptacle 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 2,84 (.1142,1)4 (.163) MoHuonlteing 2,54 (.100) Signal Contact 2,54 (.100) 9,40 (.370) 9,40 (.370) 5,54(.218) 12,27 (.483) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 0 #8 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) MoHuonlteing 82,,2880 ((..311206)) MoHuonlteing Signal Contact 82,,2880 ((..311206)) Signal Contact 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 12,27 (.483) 5,54(.218) 9,40 (.370) 12,27 (.483) 5,54(.218) 9,40 (.370) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF REAR FLANGE REF 11,05 (.435) 11,05 (.435) REAR FLANGE REF 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) R 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) e Shell Size D D a Contact Arrangement 43W2 47W1 No. of Size 20 Cavities 41#20 46 #20 d No. of Size 8 Cavities 0 #8 0 #8 e r ’ s R e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 265

PCB Hole Pattern — Standard/European Straight PC Tails — Plug 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 9,60 (.378) 9,60 (.378) 5,49 5,49 6,86 6,86 (.216) (.216) (.270) (.270) CSoignntaaclt (2.1,1824) MHooluenting 2,74 (.108) (2.1,1824) MoHuonlteing 8,23 (.324) 2,84 (.112) Mounting Signal Hole 8,23 (.324) Contact 5,49(.216) CSoingtnaaclt (5.2,4196) (5.2,4196) 8,23 (.324) 8,23 (.324) Shell Size E A A Contact Arrangement 5W1 7W2 11W1 No. of Size 20 Cavities 4 #20 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) 5,54(.218) 2,84 (.112) Mounting Hole Mounting Hole SignalContact 2,80 (.110) 4,14 (.163) Signal 4,14 (.163) Contact 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal 5,54(.218)5,54(.218) Contact 2,84 5,54(.218) 2,84 (.112) (.112) e c r Mounting Hole Signal 2,80 (.110) Mounting Hole Contact 8,28 (.326) 8,28 (.326) u 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) o 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) s 15,19 (.598) 15,19 (.598) e R Shell Size B B Contact Arrangement 17W2 21W1 No. of Size 20 Cavities 15 #20 20 #20 No. of Size 8 Cavities 0 #8 0 #8 s ’ r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 266 Dimensions subject to change

PCB Hole Pattern — Standard/European Straight PC Tails — Plug 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) (2.1,1824) MoHuonlteing Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C Contact Arrangement 13W6 No. of Size 20 Cavities 7 #20 No. of Size 8 Cavities 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218) 2,84 (.112) 5,54(.218) 2,84 (.112) Signal 2,80 (.110) 2,80 (.110) Mounting Hole Contact 8,28 (.326) Mounting Hole CSoignntaaclt 8,28 (.326) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 0 #8 0 #8 63,50 (2.500) 63,50 (2.500) 16,56 (.652) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal 5,54(.218)5,54(.218) R 5,54(.218) 2,84 (.112) Contact 5,54(.218) 2,84 (.112) e a 2,80 (.110) 2,80 (.110) d Mounting Hole CSoignntaaclt 8,28 (.326) Mounting Hole 8,28 (.326) e 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) r 12,42 (.489) 12,42 (.489) 12,42 (.489) ’ 15,19 (.598) 15,19 (.598) 15,19 (.598) s 17,96 (.707) Shell Size C C R Contact Arrangement 25W3 27W2 No. of Size 20 Cavities 22 #20 25 #20 e No. of Size 8 Cavities 0 #8 0 #8 s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 267

PCB Hole Pattern — Standard/European Straight PC Tails — Plug 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 61,12 (2.406) 4,14 (.163) MoHuonlteing MoHuonlteing 2,84 (.112) 2,84 (.112) Signal Contact Signal Contact 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 0 #8 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 8,28 (.326) 8,28 (.326) 2,80 (.110) MoHuonlteing 2,80 (.110) MoHuonlteing Signal Contact 2,84 (.112) 2,84 (.112) Signal Contact 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) e 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) c 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) r Shell Size D D u Contact Arrangement 43W2 47W1 No. of Size 20 Cavities 41#20 46 #20 o No. of Size 8 Cavities 0 #8 0 #8 s e R s ’ r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 268 Dimensions subject to change

PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 9,60 (.378) 9,60 (.378) CSoignntaaclt (5.2,4196) (5.2,4196) 2,84 MHooluenting 2,74 (.108) (2.1,1824) MoHuonlteing (6.2,87860,2)3 (.3(26.24,87)60) 2,84 (.112) (.112) MoHuonlteing 8,23 (.324) CSoingtnaaclt 5,49(.216) CSoingtnaaclt (5.2,4196) (5.2,4196) 8,23 (.324) 8,23 (.324) Shell Size E A A Contact Arrangement 5W1 7W2 11W1 No. of Size 20 Cavities 4 #20 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) 5,54(.218) CSoignntaaclt 4,14 (.163) Mounting Hole 2,80 (.110)4,14S (i.g1n6a3l)Contact Mounting Hole 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size B B Contact Arrangement 9W4 13W3 No. of Size 20 Cavities 5 #20 10 #20 No. of Size 8 Cavities 0 #8 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) CSoingtnaaclt 5,54(.218)5,54(.218) 2,84 R 5,54(.218) 2,84 (.112) (.112) e a Mounting Hole Signal 2,80 (.110) Mounting Hole d Contact 8,28 (.326) 8,28 (.326) e 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) r 12,42 (.489) 12,42 (.489) ’ 15,19 (.598) 15,19 (.598) s Shell Size B B Contact Arrangement 17W2 21W1 R No. of Size 20 Cavities 15 #20 20 #20 No. of Size 8 Cavities 0 #8 0 #8 e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 269

PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) MoHuonlteing (2.1,1824) 16,56 (.652) Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size C Contact Arrangement 13W6 No. of Size 20 Cavities 7 #20 No. of Size 8 Cavities 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218)5,54(.218) 2,84 (.112) 5,54(.218) 5,54(.218) 2,84 (.112) 82,,2880 ((..311206)) CSoingtnaaclt Mounting Hole Mounting Hole CSoignntaaclt 28,,8208 ((..131206)) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 9,68 (.381) Shell Size C C Contact Arrangement 17W5 21WA4 No. of Size 20 Cavities 12 #20 17 #20 No. of Size 8 Cavities 0 #8 0 #8 63,50 (2.500) 63,50 (2.500) 16,56 (.652) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal 5,54(.218)5,54(.218) e 2,84 (.112) 5,54(.218) Contact 5,54(.218) 2,84 (.112) c r u 82,,2880 ((..311206)) CSoignntaaclt Mounting Hole Mounting Hole 28,,8208 ((..131206)) o 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) s 9,68 (.381) 9,68 (.381) e 12,42 (.489) 15,1129, 4(.25 9(.84)89) 12,1452, 1(.94 8(.95)98) 15,19 (.598) R 17,96 (.707) Shell Size C C Contact Arrangement 25W3 27W2 s No. of Size 20 Cavities 22 #20 25 #20 ’ No. of Size 8 Cavities 0 #8 0 #8 r e Signal Contact X Recommended PCB Hole X d 0,60 (.024) 1,00 (.039) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 270 Dimensions subject to change

PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 4,14 (.163) 61,12 (2.406) Mounting Mounting 2,80 (.110) Hole Hole 2,84 (.112) Signal Contact 2,84 (.112) Signal Contact 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) Shell Size D D Contact Arrangement 24W7 36W4 No. of Size 20 Cavities 17 #20 32 #20 No. of Size 8 Cavities 0 #8 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) 6,91 (.272) 6,91 (.272) MoHuonlteing 28,,8208 ((..131206)) MoHuonlteing 82,,2880 ((..311206)) 2,84 (.112) Signal Contact 2,84 (.112) 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218)5,54(.218) 5,54(.218)5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 19,33 (.761) R 22,10 (.870) 22,10 (.870) 22,10 (.870) 22,10 (.870) e Shell Size D D a Contact Arrangement 43W2 47W1 d No. of Size 20 Cavities 41#20 46 #20 No. of Size 8 Cavities 0 #8 0 #8 e r ’ s R e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 271

° PCB Hole Pattern — Standard 90 — Plug & Receptacle 63,50 (2.500) 24,84 (.978) 24,84 (.978) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 25,00 (.984) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) SCiognntaalct (5.2,541,964)9(.2(5.12,641)96) MHooluenting SCiognntaalct 5,54(.52,1584)(.52,1584)(.218) MHooluenting 2,84 (.112) 2,84 (.112) 8,64 (.340) 28,,7243 ((..130284)) 7,19 (.283) 8,64 (.340) 2,80 (.110) 7,19 (.283) REAR FLANGE REF REAR FLANGE REF 8,28 (.326) REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) 9 Contacts 12,42 (.489) 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) 17,96 (.707) 20,70 (.815) 20.70 (.815) 23,47 (.924) 23,47 (.924) 37 Contacts 33,32 (1.312) 9,60 (.378) 9,60 (.378) 6,86 6,86 (.270) (.270) Signal 8,23 (.324) Mounting Contact 2,74 (.108) Hole 2,54 (.100) 5,49 8,64 (.340) (.216) 7,19 (.283) 5,49 5,49 (.216) (.216) REAR FLANGE REF 8,23 (.324) 8,23 (.324) REAR FLANGE REF 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal Contact 5,54(.218) Mounting Hole e 2,84 (.112) c r 8,64 (.340) 2,80 (.110) 7,19 (.283) 8,28 (.326) u REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF o 9,68 (.381) 9,68 (.381) s 12,42 (.489) 12,42 (.489) 15,19 (.598) 15,19 (.598) e R 25 Contacts s 50 Contacts ’ r Signal Contact X Recommended PCB Hole X e 0,76 (.030) 1,14 (.045) d 1,00 (.040) 1,40 (.055) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 272 Dimensions subject to change

° PCB Hole Pattern — European 90 — Plug & Receptacle 63,50 (2.500) 24,84 (.978) 24,84 (.978) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 25,00 (.984) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) SCiognntaalct (5.2,541,964)9(.2(5.12,641)96) MHooluenting SCiognntaalct 5,54(.52,1584)(.52,1584)(.218) MHooluenting 2,54 (.100) 2,54 (.100) 2,74 (.108) 10,90 (.429) 8,23 (.324) 9,40 (.370) 10,90 (.429) 28,,8208 ((..131206)) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF 9 Contacts 12,42 (.489) 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) 17,96 (.707) 20,70 (.815) 20.70 (.815) 23,47 (.924) 23,47 (.924) 37 Contacts 33,32 (1.312) 9,60 (.378) 9,60 (.378) 6,86 6,86 (.270) (.270) Signal 8,23 (.324) Mounting Contact 2,74 (.108) Hole 2,54 (.100) 5,49 10,90 (.429) (.216) 9,40 (.370) 5,49 5,49 (.216) (.216) REAR FLANGE REF 8,23 (.324) 8,23 (.324) REAR FLANGE REF 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal Contact 5,54(.218) Mounting Hole 2,54 (.100) R 2,80 (.110) 10,70 (.421) 8,28 (.326) 9,40 (.370) e 6,91 (.272) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) REAR FLANGE REF a 12,42 (.489) 12,42 (.489) d 15,19 (.598) 15,19 (.598) e r 25 Contacts ’ s 50 Contacts R e s Signal Contact X Recommended PCB Hole X o 0,60 (.024) 1,00 (.039) u Mounting Type Recommended PCB Hole X r Without Boardlock 3,05 (.120) c With Boardlock 3,10 (.122) e Dimensions are shown in mm (inch) Dimensions subject to change 273

PCB Hole Pattern — Standard/European Straight — Plug & Receptacle 25,00 (.984) 5,49 5,49 Signal (.216) (.216) Contact 5,49(.216) 2,84 (.112) 2,74 (.108) Mounting Hole 8,23 (.324) 9 Contacts 33,32 (1.312) 37 Contacts 9,60 (.378) 9,60 (.378) 6,86 6,86 (.270) (.270) Mounting 8,23 (.324) Hole 2,74 (.108) 2,84 (.112) 5,49 SCiognntaalct (.216) 5,49 5,49 (.216) (.216) 8,23 (.324) 8,23 (.324) 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218)5,54(.218) Signal Contact 5,54(.218) e 2,84 (.112) c Mounting 2,80 (.110) r Hole 8,28 (.326) u 6,91 (.272) 6,91 (.272) o 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) s 15,19 (.598) 15,19 (.598) e R 25 Contacts s 50 Contacts ’ Signal Contact X Recommended PCB Hole X r 0,60 (.024) 1,00 (.039) e 0,76 (.030) 1,14 (.045) d 1,00 (.040) 1,40 (.055) a Mounting Type Recommended PCB Hole X e Without Boardlock 3,05 (.120) R With Boardlock 3,10 (.122) Dimensions are shown in mm (inch) 274 Dimensions subject to change

D Subminiature Lease Tooling ABT-607 Pneumatic Crimper ABT-607 The ABT-607 is a pneumatic powered and controlled machine. It is designed for customers with moderate volume. This machine is designed to semi-automatically crimp stamped and formed contacts onto pre-stripped stranded or single conductor electrical wire. This machine will accomodate size 34 thru 12 AWG wire and is actuated by the use of a foot pedal. Machine Crimp Rate: 800 per hour Power Requirements: Pneumatic =100 psi, 2 cu. ft. per min. Products: D*A, MDSM, 75 Ohm Crimp Coax ABT-620 UCCS Semi-Automatic Crimper/Stripper ABT-620 UCCS The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic powered, microprocessor controlled machine. It is designed to semi-automatically strip insulation from stranded or single conductor electrical wire and attach a stamped and formed contact by crimping. The machine will accommodate 34 thru 12 AWG wire. Primary application of the machine is the termination of jacketed cable where the individual leads cannot be stripped on fully automated equipment. The ABT-620 UCCS operates automatically upon insertion of a wire or it can be switched over to foot pedal operation as desired. Machine Strip/Crimp Rate: 1200+per hour Power Requirements: Electrical =115 VAC, 60 Hz, 20 A Pneumatic =80 psi, 3 cu. ft. per min. Products: D*A, MDSM CBT-646 Vibra-Bowl Crimper CBT-646 The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is R designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is e actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. a d Machine Crimp Rate: 1300+per hour e Power Requirements: Electrical =115 VAC, 60 Hz, 5 A r Pneumatic =85 psi, 2 cu. ft. per min. ’ s Products: D*MA R e s o u r c e Dimensions are shown in mm (inch) Dimensions subject to change 275

D Subminiature Glossary of Terms Glossary of Terms In every job speciality there are certain words and AWG — American Wire Gauge. A standard for wire C — Abbreviation for Centigrade, or more properly phrases used by the ‘‘insiders’’ which after a time diameters based on the approximate circular mil Celsius, since the term Centigrade was officially become almost a language unique to that area of the wire. As numbers get larger, wire abandoned by international agreement in 1948. speciality. D Subminiature technology is a typical diameters decrease in size (a size 16 AWG wire See CELSIUS. example of that condition. has a larger diameter than a size 22 AWG). Cable Assembly — A cable (or bundle of cables) The following pages provide some explanations, in Backshell — (Also known as Endbell) The outer with plugs and/or receptacles on each end. an attempt to clarify some of the terms that are rear end of the connector which is attached by commonly used by engineers and sales staff at ITT means of internal threads or screws. It adapts the Cable Clamp — A rear connector clamping Cannon. connector to its wire connections in a variety of accessory which tightens over a cable or wire ways. Typical backshells might have cable clamps bundle to provide strain relief to the cable. The The list is not comprehensive, but highlights many to secure a wire bundle, ridges for heat shrink cable clamp may be part of a more elaborate of the expressions commonly used. Should you tubing, pipe threads, or shielded termination endbell or it may be used alone. Some cable have any comments or additions please contact mechanisms. Backshells may be straight, 90°, or clamps also provide cable jacket sealing using a us. Feedback will be appreciated. 45°. resilient gland; for example the MS3057-C, others provide only strain relief. Accelerated Aging — A connector test in which Bandwidth — The range of frequencies within temperature, voltage, current, or other parameters which performance falls within specific limits. Cadmium — A metallic element chemically are increased beyond the normal operating values Usually the bandwidth is given as an operating related to zinc and mercury, widely used for to observe deterioration in a relatively short period range and the operating specifications apply only plating. It has an extraordinary ability to resist of time. to that bandwidth, unless otherwise stated. outdoor corrosion. It is especially resistant to alkali. Cadmium is electrically conductive and it is Accessories — Auxiliary devices such as cable Bar — A centimeter-gram-second unit of pressure easy to solder. Its symbol is Cd. clamps, endbells, gaskets, or any number of (force exerted on a unit of area) equal to 1,000,000 mechanical hardware devices that can be added to dynes per square centimeter. Formerly known as CECC — Abbreviation for Electronic Components a connector. microbar. Its symbol is b. Committee of CENELEC, the European committee for Electrotechnical Standardization. CECC uses Alloy — A composition of two or more elements, Base Metal — The metal which the connector or the IEC test methods, and thus is based upon of which at least one is a metal. In connector connector component is made and over which worldwide standards. applications it is usually a combination of metals various platings will be deposited. which is used to create an alloy superior in Celsius — A temperature scale in which the performance to any of its individual components. Beryllium Copper — An alloy of copper used to freezing point of water is 0°and the boiling point is make contacts. It is relatively expensive, but has 100° at normal atmospheric pressure. Formerly Alternating Current — A flow of electricity which superior spring qualities, is resistant to fatigue, and known as Centigrade, but officially changed to reaches a maximum in one direction, decreases to can operate at higher temperatures than other Celsius by international agreement in 1948. zero, then reverses itself and reaches maximum in materials such as phosphor bronze. It is used the opposite direction. This cycle is repeated when numerous insertion and extraction cycles CEN — Abbreviation for European Committee for continuously. The number of such cycles per are required. Standardization. A European standards group second is the frequency. The average value of the corresponding to the ISO at the European level. voltage during any cycle is zero. Abbreviated ac. Body — The main portion of the connector made of the shell, insulator, and contacts. CENELEC — Abbreviation for European Ambient Temperature — The temperature of the Committee for Electrical Standardization. A environment surrounding the connector. Usually Boot — A rear accessory, usually made of a European standards group corresponding to the the air. Normally used as the reference when resilient material, which is used around a IEC at the European level. e specifying the OPERATING TEMPERATURE range multiconductor cable to add additional insulation, c of the connector. strength, abrasion resistance, or sealing. Chamfer — A bevel cut on the inside edge of an r insulator contact cavity or a mounting hole. In a u Ampere — A unit of electrical current or rate of Brass — Metal alloy of copper and zinc used for contact cavity the chamfer is intended to guide the flow of electrons. One volt across one ohm of contacts. It is low cost, an excellent conductor, mating pin into the cavity. In a mounting hole it is a o resistance causes a current of 1 ampere. and resists fatigue. countersink to accept a cone shaped bolt. s Abbreviated Amp or A. e Breakdown — An electrical discharge through a Characteristic Impedance — The characteristic R Anodize — A protective, insulating oxide layer connector insulator or insulation on a wire. A impedance of a transmission line is the impedance formed on a metal by electrolytic action. catastrophic failure mode. of the line when it is terminated in a perfect load (a Occasionally used as the outer most layer in load that absorbs all the energy and reflects none, s connector plating, anodize is a very tough, non- Breakdown Voltage — The voltage at which an such that VSWR =1.00). ’ conductive plating. insulator ruptures. r Clearance Hole — See Through Hole. e Attenuation — Power loss in an electrical system, Breakout — The point at which wires are d expressed in decibels. separated from a multi-conductor cable or wire Closed Entry— An insulator design which limits a bundle for routing to other points. the diameter of the mating contacts. e R Dimensions are shown in mm (inch) 276 Dimensions subject to change

D Subminiature Glossary of Terms Glossary of Terms Closed Socket Contact — A socket contact in Contact Size — This usually relates to the Decibel — A standard unit of measure for which the mating cavity limits the entry of a contact maximum size wire this contact can nominally transmission gain or loss. It expresses the ratio of or probe having a diameter larger than the mating accommodate. It is based on that AWG size most power input to power output. Abbreviated dB. The pin. closely corresponds to the circular mil area of the term dBm is used when 1milliwatt is the reference engaging end of a pin contact for that size. For level. Coax — Abbreviation for coaxial. example, a size 16 contact can accomodate a size 16 AWG wire maximum and the pin corresponds to Derating — To reduce the voltage, current, or Coaxial Cable — A cable that comprises a single the CMA of a size 16 AWG. Note, however, that power rating of a connector to improve its copper wire surrounded by insulating material, oversized crimp pots are available for some crimp reliability or to permit operation at high ambient wire shielding or mesh, and a plastic protective contacts which will allow, for example, a size 16 temperatures or altitudes. sheath. contact to accommodate a size 14 AWG wire. Derating Curve — A graph of the change in power Component — An essential functional part of the Contact Spacing — The distance between the handling capability of a connector as a function of connector. centers of adjacent contacts. ambient temperature or altitude. Typically the graphed function is curved, hence the name. Contact — The conductive element in a connector Creepage — The conduction of electricity across which makes the actual connection between the the surface of an insulator. Diallyl Phthalate — A thermosetting plastic used wire and the mating connector for the purpose of for insulators and some types of connector transferring electrical energy. Ideally the contact Creepage Distance — The shortest distance housings. It has outstanding resistance to should add nothing to the circuit. In the real world, between contacts of opposite polarities, or chemicals, excellent dimensional stability, and however, contacts typically have a small between a live contact and ground, measured over superior electrical insulating properties. CONTACT RESISTANCE and associated potential the surface of the insulator. drop. Dielectric — An insulator used to isolate two Creepage Path — A path across the surface of the conductors having a low loss factor (RF cables). Contact Alignment — The overall play that a insulator between two conductors. Lengthening The perfect insulator is a vacuum. contact has in the insulator cavity to allow the the path reduces the possibility of arc damage. mating contacts to self align. Also called contact Dielectric Constant — That property (K) of an float. Crimp — A method of attaching a contact to a wire insulating material which is the ratio of the parallel through the application of pressure. capacitance (C) of a given configuration of Contact Arrangement — See LAYOUT. electrodes with the material as the dielectric, to the Crimp Contact — A contact which is terminated to capacitance of the same electrode configuration Contact Cavity — A defined hole in the connector a wire by means of crimping with an appropriate with a vacuum as the dielectric. insulator into which the contacts fit. The cavities die and tool. After termination, an insertion tool is are generally marked with a unique designation or normally used to insert the crimped contact into Digital — A signal comprising discrete elements. number for ease of identification. the connector. Removable crimp contacts can be FRONT RELEASE or REAR RELEASE. An DIN — Abbreviation for Deutsche Industrie Norm, Contact Resistance — The maximum amount of extraction tool is usually required to remove the a German standards organization. resistance which a contact introduces into the contact. connection when carrying a specified current Direct Current — An essentially constant value of (usually stated in milliohms). When not stated, Crosstalk — Undesired electrical currents in current that flows in only one direction. values are typically given for ‘‘Initial’’ or ‘‘new’’ conductors caused by electromagnetic or Abbreviated dc. contacts. Most specifications also limit the electrostatic coupling from other conductors or maximum resistance during or after each of a from external sources. Also, leakage of optical Dust Cap — A cover used in place of a mating series of extreme tests, such as ‘‘Contact power from one optical conductor to another. connector to seal it against dirt and moisture. R Resistance After Corrosion Test’’. These figures Usually secured to the connector by a captive are typically slightly higher than ‘‘Initial’’. CSA — Abbreviation for Canadian Standards chain, wire, or rope. e Association. a Contact Retention — The maximum allowable Electroplating — To deposit a metal on the d axial load which can be applied to a contact from Current — The movement of electrons through a surface of a conductor using electrolysis. either direction without it being dislodged from the conductor. Current is measured in amperes. Its e insulator. Usually stated in Newtons or pounds of symbol is L. EMI/RFI — Electro-Magnetic Interference and r force. Radio Frequency Interference. This is unwanted ’ Current Rating — The maximum current that a stray electronic radiation which may enter, and/or s Contact Separation Force — The force required particular wire, contact, or connector can be emitted by an electronic system. The most to separate a pair of mated contacts. Usually accommodate. NOTE: When several wires are common method of shielding interconnections R stated in Newtons or pounds of force. used in a single connector or elevated temperature against this radiation is to use wires with a metallic or altitude is involved, derating curves must be braided shield and a connector system which will e applied to these ratings. A typical derating system extend the shield through the interconnection. This s is MIL-W-5088 which allows the user to calculate type of design will keep radiation from entering, or o the derating effects of current, ambient being emitted by the system. Backshells for u temperature, number of wires in the bundle, and shielded cable and connectors with threads or r altitude. grounding fingers are typically used for this purpose. Call for the specific EMI/RFI c accommodations of the connectors in this catalog. e Dimensions are shown in mm (inch) Dimensions subject to change 277

D Subminiature Glossary of Terms Glossary of Terms EN — Abbreviation for Euro Norm. A European Front Mounting — A receptacle that can only be Initial — A test result taken prior to any other market-wide product standard. mounted to the front of a panel with its mounting environmental testing. For example, contact FLANGE outside the equipment. resistance is frequently specified ‘‘Initial’’, that is, Endbell — See BACKSHELL. with ‘‘new’’ contacts. Most specifications also Front Release — For crimp type removable limit the maximum resistance during or after each Extraction Tool — A device used to remove a contacts, front release means that the appropriate of a series of extreme tests, such as ‘‘Contact (removable) contact from a connector insulator. extraction tool is inserted from the front, or mating Resistance After Corrosion Test’’. These figures The extraction tool may be inserted into the mating face, of the connector. The contact is then pushed are typically slightly higher than ‘‘Initial’’. face of the insulator (FRONT RELEASE) or the wire out the rear(wire side) of the connector. side (REAR RELEASE). In either case, the contact Insert — See INSULATOR. comes out the rear, or wire side, of the connector. Gas Tight — The mating of two contact surfaces which are so tight that corrosive gasses can not Insert Arrangement — See LAYOUT. Fahrenheit — A temperature scale in which the enter the joint. freezing point of water is defined as 32°and the Insert Retention Force — The maximum boiling point is 212° at normal atmospheric Gold — A precious metal that is more conductive allowable force which should be applied to the face pressure. See the conversion tables for converting than silver or copper. Because it does not corrode of the insulator without dislodging it from the shell Fahrenheit to Celsius. Abbreviated F. and is highly conductive, it is used as plating for or causing any change in connector performance contacts. Its chemical symbol is Au. specifications. Usually stated in Newtons or Female Contact — See SOCKET CONTACT. pounds of force. Grommet Cavity — A defined hole in the WIRE Ferrule — A bell shaped ring which is placed over SEALING GROMMET through which the wires are Insertion Force — The effort, usually stated in a WIRE SEALING GROMMET to provide uniform passed. The cavities are generally marked with a ounces or Newtons, required to engage two axial compression of the grommet and to minimize unique designation or number for ease of use. contacts or connector halves. the transmission of torque to the grommet when the backshell is screwed on to the rear of the Guide Pin — A special pin which is inserted into a Insertion Loss — The attenuation that results connector. Ferrules are a part of the sealing socket contact before the contact can be inserted when a transducer is inserted in a transmission mechanism at the rear of a connector. Ferrules are into the connector insulator. Guide pins provide a line. It is the ratio of the power input to the normally a separate component part of the rounded surface at the front of the socket and transducer to the power out of the transducer connector although some backshells have greatly aid in pushing the contact into the insulator expressed in decibels. integrated ferrules. Ferrules are usually made from thus avoiding damage to both the insulator and the a thermoplastic material, but occasionally ferrules contact. Typically, small size socket contacts Insertion Tool — A small, hand-held tool used to are made of metal. require the use of guide pins while larger sizes can insert contacts into a connector. be inserted without them. Finish — The metalic coatings used on contacts Insulation — A material that has high electrical and metal connectors. These are thin layers of Harness — A group of wires or cables bundled resistance and is suitable for covering or encasing metal designed to improve conductivity, together with attached connectors and/or electrical components to prevent a short circuit. solderability, or to resist corrosion. Typical contact components in a preshaped assembly. finishes are gold or silver. Typical shell finishes are Insulation Displacement Connector (IDC) — A olive drab over cadmium, electroless nickel, or Hz — Symbol for Hertz, an international unit of connector contact with sharp tines which pierce black anodize. frequency equal to one cycle per second. That is, and displace the wire insulation and make direct 20,000 Hz is 20,000 cycles per second. electrical connection with the conductor. Normally Flange — A square mounting flange with four used with multipin connectors which must be mounting holes for bolting the connector to a I/O — Input/Output terminated to flat cable. This is a fast, low cost panel. The mounting holes may be through holes method to terminate many conductors e or threaded. IEC — Abbreviation for the International simultaneously. c Electrotechnical Commission. An international r Flanged Receptacle — (Also known as a Box organization that develops standards exclusively Insulation Resistance — The minimum u Mount or Wall Mount) The shell of this connector for electrical engineering. CENELEC is the resistance (usually stated in Megohms) between has a square flange with mounting holes at each equivalent organization at the European level. adjacent contacts and between the contacts and o corner. Mounting holes are usually through holes, the shell at a specific voltage. When not stated, s but may be threaded. Flanged receptacles can Impedance Match — When a transmission line is values are typically given for new insulators. Most e usually be front or rear panel mounted depending terminated so that VSWR = 1.00. Another specifications also specify minimum resistance R upon panel thickness. Some connectors have two definition is when a source is terminated in an figures during or after each of a series of extreme different versions, one for front mounting, and one impedance that allows optimum energy transfer. tests, such as ‘‘Insulation Resistance During Dry for rear panel mounting. Heat’’. s Indentor — The part of a crimping die which ’ Flash Plating — As commonly used in connector indents the contact barrel to form the actual crimp. Insulation Support — An extended portion at the r terminology, flash refers to extremely thin platings Indentors normally make six or eight multiple rear of a crimp contact that is crimped around the e of metal, for example: gold flash is a very thin indentions for each crimp. wire insulation to provide extra strain relief. This d plating of gold. So thin, that the thickness is crimp is in addition to the crimp over the conductor a generally not specified. which provides the actual electrical termination. e R Dimensions are shown in mm (inch) 278 Dimensions subject to change

D Subminiature Glossary of Terms Glossary of Terms Insulator — The insulating element into which the Keying — A method of differentiating a connector Nest — The portion of a crimping die that supports contacts are mounted in a connector. This can be a if more than one connector with the same sex and the contact barrel during crimping. resilient material, thermoplastic, or a thermoset layout is to be used in a system. The key is usually compound, among other materials. a pin or other projection which can be located in a Newton — A unit of acceleration. One Newton is contact cavity or slot. The key will prevent a the force capable of accelerating 1kilogram to one Insulator Rotation — A method of differentiating a connector without a matching orifice from mating. meter per second per second. 1pound force = circular connector if more than one connector with Keying and POLARIZATION serve the same 4.448221Newtons. Abbreviated N. the same sex and layout is to be used in a system. function, but keying can be done by the user, while The insulator is permanently positioned in the shell polarization is manufactured into the connector Ohm — The unit of electrical resistance. One ohm so that only a connector with the same degree of and normally can not be altered by the user. is the value of resistance through which a potential rotation can be mated with it. Possible rotations are difference of one volt will maintain a current of one specific to each layout with some layouts having Layout — The number, size, and geometric ampere. Its symbol is the Greek letter omega ((cid:1)). many possible rotations and others having none. A arrangement of the contacts in a connector. When chart of valid rotations is listed by layout for a connector is said to have a certain ‘‘layout’’ it Operating Temperature — The range of connectors capable of being rotated. Most refers to a specific contact configuration. For AMBIENT TEMPERATURES over which the connector series use the military convention of example, Combo D has 2 pages of drawings connector can operate and still meet all of its assigning letter designations for specific degrees showing the arrangement of the contacts in the design specifications. of rotation (for example: W, X, Y, Z). See KEYING. insulator. Each of these contact cavity arrangements can be referred to as a layout. Operating Voltage — The range of voltages over Interchangeable — The characteristic of which the connector can be operated. Safety connectors in which a connector half of one Locator — A part of a crimping tool TURRET. precautions must be taken anytime a voltage in manufacturer or series will directly replace that of Rotation of the locator sets the tool for a particular excess of 50V is to be used in a circuit. Check your another manufacturer and provide the same size or sex contact. See TURRET. local and national codes for guidelines. electrical and mechanical function. Male Contact — See PIN CONTACT. Outgassing — The circumstance in which an Intermateable — The characteristic of connectors insulator releases gasses trapped within it under a in which a connector half of one manufacturer or Mating Life — The minimum number of times a vacuum or conditions of decreased pressure, high series will mate directly with the connector half of connector can be mated and unmated and still heat, or both. another manufacturer. meet all of its design specifications. The maximum life may be much higher than this figure. Panel — The outside surface of a piece of Intermittent — Occurring at intervals. A equipment on to which connectors are mounted. connection which passes electrical current only in Mil — One thousandth of an inch (.001). Used in The panel is usually made of metal. random or undesirable intervals. the United States as a unit of length in wire diameters and linear dimensions. Panel Mount — A connector designed to be Intermountable — The characteristic of mounted on a panel by means of screws or jam connectors in which one manufacturer’s Mil-Spec — Abbreviation for Military nut. connector or series will mount in exactly the same Specification. panel space and mounting holes as another PCB — Abbreviation for Printed Circuit Boards. manufacturer’s product. Milliampere — One one-thousandth (.001) of an ampere. Abbreviated mA. Performance Class 1— Performance class per ISO — Abbreviation for the International Standards European specification DIN 41652, specifying Organization. A group that operates at the Millimeter — Metric unit of linear measure. contact performance to 500 mating cycles, international level and sets most standards for 1millimeter = .03937 inches. Abbreviated mm. followed by testing per DIN 41640, Part 21. The industry, with the exception of electrical contact is subjected to severe environmental R engineering and telecommunications which are set Milliohm — One one-thousandth (.001) of an conditions, including industrial gasses, after the by the IEC and ITU respectively. CEN is the ohm. Abbreviated m(cid:1). 500 mating cycles, and must meet basic contact e equivalent organization at the European level. resistance, engaging force, and separation force a mm2— Millimeters squared. A standard for wire tests. d Jacket — The outermost layer of insulation in a diameters used in Europe instead of AWG. As cable composed of several wires. numbers get larger, wire diameters increase in Performance Class 2 — Performance class per e size. The relationship between mm2and AWG is European specification DIN 41652, specifying r Jackscrew — A screw attached to one half of a reverse logarithmic. 1mm2=1973 circular mils. A contact performance to 200 mating cycles, ’ connector pair used to mechanically align, draw conversion graph is needed to make accurate followed by testing per DIN 41640, Part 21. The s them together, and lock them in place. comparisons between AWG and mm2. Call for contact is subjected to severe environmental assistance. conditions, including industrial gasses, after the R Key — A mechanism used to polarize connectors 200 mating cycles, and must meet basic contact by the user. See KEYING. Mounting Clip — Any of a variety of mounting resistance, engaging force, and separation force e accessories used to secure a connector or tests. s connector pair to a rigid surface. o u Multi-Conductor Cable — Two or more individual r wires surrounded by a jacketing material. c e Dimensions are shown in mm (inch) Dimensions subject to change 279

D Subminiature Glossary of Terms Glossary of Terms Performance Class 3 — Performance class per Potting Cup — A bell-shaped (plastic) backshell Salt Spray Test — A test, or series of tests, in European specification DIN 41652, specifying with an enlarged opening for the wires. After the which mated and/or unmated connectors are contact performance to 50 mating cycles, connector is loaded with wired contacts, the subjected to salt water under specified conditions. followed by testing per DIN 41640, Part 21. The potting cup is attached to the rear of the connector. Used to test the connector’s resistance to corrosion contact is subjected to severe environmental The inside of the cup is then filled with a potting and any associated degradation in electrical conditions, including industrial gasses, after the compound. When the compound hardens, it forms function. 50 mating cycles, and must meet basic contact a solid, permanent, watertight mass around the resistance, engaging force, and separation force wires. Screw Machine Contact — A contact made from a tests. solid bar or rod using screw machine operations. Potting Ring — A portion of the POTTING CUP Some screw machine contacts include secondary Peripheral Seal — A resilient seal used to keep which secures the bell shaped cup to the rear of the elements which are welded, crimped, or formed moisture from entering the connector at the point connector, usually by means of internal threads. around the basic screw machined part to complete where the plug and receptacle shells meet. A the contact. common method is to use flat gaskets on Pre-Tin — To apply tin-lead solder to the contact receptacles and O-rings on plugs. solder cup and/or conductor prior to soldering the Selective Plating — The application of metal two together. PLATING to selective areas of the contact, Phosphor Bronze — An alloy of copper, tin, and particularly those areas subject to wear. Precious phosphorus used to make spring contacts. It is Rear Mounting — A receptacle that mounts metal platings may be applied selectively to those typically used in lower cost contacts where through the panel from the rear, with its mounting contact surfaces responsible for the electrical frequent insertions and withdrawals and high flange inside the equipment. Typically, rear mount connection, reducing the contact cost without temperatures are not a factor. receptacles are slightly longer than front mount sacrificing electrical performance. types to allow for the thickness of the panel. Flange Pin — A male contact. See PIN CONTACT. mount receptacles usually come in front and rear Shell — The outside case of a connector into which mount versions. All Jam nut receptacles are rear the insulator and contacts are situated. Pin Contact — The contact which has a long shaft mount. at the engagement end which enters the socket Shell Size — A standard system developed for contact. Rear Release — For crimp type removable military circular connectors for indicating the contacts, rear release means that the appropriate diameter of the shell. The system is based upon 1⁄16(cid:4) Plating — See FINISH. extraction tool is inserted from the rear, or wire increments, that is, a size 16 shell is one inch in side, of the connector. The contact is then pulled diameter. Plug — The male portion of a connector pair out the rear of the connector. usually employing a coupling nut to secure it to the Shield Effectiveness — The ability of a shield to receptacle half. A plug may have either pin or Receptacle — The connector half that mates with screen out undesirable signals. socket contacts. the plug. The receptacle has threads, pins or ramps which engage the coupling nut on the plug, Shock — An abrupt impact applied to a stationary Polarization — A mechanical mechanism that locking the two halves together. A receptacle may object. It is usually expressed in gravities (g). allows connector halves to intermate in only one have either pin or socket contacts. specific orientation. This can be accomplished by Socket — A female contact. See SOCKET asymmetrical shapes of the two halves as in a D REF — Abbreviation for Reference. CONTACT. Subminiature connector, insulator rotation, keys, keyways, ramps, or other means. Polarization Removable Contact — A contact which can be Socket Contact — The contact which has an prevents connectors of the same size and/or same inserted and removed from the insulator by the opening at the engagement end to accept the pin layout from intermating when this is undesirable, user. An insertion tool and extraction tool are contact. such as when two otherwise identical connectors normally required to insert and remove the contact. e are used on the same panel. Polarization is Solder Contact — A contact which is terminated to c typically done by the assembler and can not be Removal Tool — See EXTRACTION TOOL the wire with solder. Solder contacts are normally r changed by the user, while keying is typically done bonded into the insulator and can not be removed u by the user with an auxiliary keying device. Resistance — That property of a substance which by the user. The alternative is crimp contacts to impedes current and results in the dissipation of which a wire is attached by crimping. Crimp o Polarizing Pin — A mechanism used to polarize power in the form of heat. The unit of resistance is contacts can usually be inserted and removed by s connectors, manufactured into the connector. See the ohm. the user. e KEYING. R Return Loss — The ratio of the power reflected Solder Cup — The end of a SOLDER CONTACT is Potting — The permanent sealing of a cable to a from a discontinuity in a transmission line to the designed to accept a wire which will then be connector using an insulating material such as power incident. soldered to the contact. s potting compound to exclude moisture or provide ’ strain relief. See POTTING CUP. RFI — See EMI/RFI. Stamped and Formed Contact — Contacts made r by stamping and forming a sheet of metal rather e Potting Compound — A sealing material used in Root Mean Square — The square root, of the than by machining metal stock. Also see SCREW d potting to fill a potting cup. average of the squares, of the values of a periodic MACHINE CONTACTS. a quantity (like alternating current), taken through one complete period. It is the effective quantity of a e periodic quantity. Abbreviated rms. R Dimensions are shown in mm (inch) 280 Dimensions subject to change

D Subminiature Glossary of Terms Glossary of Terms Star Clip — One of several designs used for screw UL — Abbreviation for Underwriter’s Voltage Rating — The maximum voltage which a machine socket contacts. A tiny plated star shaped Laboratories, a corporation supported by a group connector can sustain without breaking down or clip is captivated inside a solid barrel into which the of underwriters for the purpose of establishing varying from design specifications. pin contact fits. The clip creates a multi-point area safety standards covering certain types of of mechanical and electrical continuity between equipment and components in the United States. Voltage Standing Wave Ratio — If a signal is sent the mated contacts. down a transmission line any discontinuity will UL 94V-O — A flammability performance rating send a reflection back in the opposite direction. Stripper — A tool to remove insulation from a set by Underwriter’s Laboratories for plastics. wire. Wire Sealing Grommet — A resilient disc with V — Symbol for volt. holes in it to accommodate the individual wires Test Voltage — The range of voltages over which entering the rear of the connector. Each cavity the connector has been tested per the perimeters Vac — Volts, alternating current. forms a tight seal against the wire insulation (as in the applicable specification. long as wires within the specified diameter are Vdc — Volts, direct current. used). The grommet seals the back of the Thermoplastic — A plastic material that can be connector against moisture, dirt, and air. The softened by heat and rehardened into a solid state Vibration — A continuously reversing change in grommet is normally held in place and by cooling. This process can be accomplished the magnitude of a given force. compressed by a backshell and/or ferrule. It is using a variety of techniques. usually a separate component, but may be part of Volt — The unit of measurement of electromotive the insulator itself. Also see GROMMET CAVITY. Thermoset — A plastic material which hardens force. It is equivalent to the force required to when heat and pressure are applied. Unlike produce a current of 1 ampere through a Wire Size — A numerical designation for thermoplastic, it cannot be remelted or remolded. resistance of one ohm. conductor diameter. This catalog uses American Wire Gauge (AWG) which is based on the Through Hole — (Also known as a clearance hole) Voltage— The force which causes current to flow approximate circular mil area of the wire. See AWG A mounting hole without threads. through an electrical conductor. Its symbol is E. and mm2. The greatest effective difference in potential Turret — An interchangeable device which is between and two conductors of a circuit. Wrap Post Contact — A type of contact which is attached to a CRIMP TOOL that allows the tool to terminated by wrapping wire around a post in a crimp a range of contacts. Each turret is made to Voltage Drop — The difference in voltage manner that deforms the wire and creates a gas- crimp a specific style contact or a range of between two points in a circuit due to the loss of tight connection between the wire and the post. contacts and/or wire gauges. See LOCATOR. electrical pressure as a current flows through an This method is slow and labor intensive. If used at impedance. all, it is used in prototype work. R e a d e r ’ s R e s o u r c e Dimensions are shown in mm (inch) Dimensions subject to change 281

D Subminiature Reader’s Resource Obsolete Products General Application Connectors(cid:2) D*C Burgun Dwith snap-in, rear D*PF Straight and 90°PCB applications, D*11148 SMT – Surface Mount D, release machined or stamped UL 94V-0 rated. Refer to D* D*(SMT) no replacement, only through crimp contacts. Refer to D*U products. holes available. Refer to ZED* products. products. AD* Part number change only. D*P 90°connectors for I/O Refer to ZD* products. D*P1 Machined pressfit replaced by stamped pressfit. Refer to D*NG applications, UL 94V-0 rated. products. Refer to D*U products D*TC Part number change only. Refer to D* products. Available Products Not Listed Within This Publication General Application Connectors(cid:2) Special Application Connectors(cid:2)(cid:2) D*U Burgun Dwith snap-in, rear D*MA Military specification quality GD* Grommet Denvironmentally release machined or stamped removable crimp style contacts for sealed, crimp, snap-in, rear crimp contacts, UL 94V-0 rated. high performance applications. release contacts. D*SF Speedy Dfor IDC ribbon cable, UL ZD*A Low cost, stamped contacts, high D*D Environmentally sealed, cast 94V-0 rated, accomodates Sizes density 90°PCB connectors. aluminium shell. Product not 28-26 AWG cable on 1,27 (.050) intermatable with M24308 type conductor spacing. D Subminiature connectors. (cid:2)Commercial Applications Only (cid:2)(cid:2)Military or Commercial Applications Consult factory for details. e c r u o s e R s ’ r e d a e R Dimensions are shown in mm (inch) 282 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page 015-8755-000.......................207 CA111972-12.........................98 DA15P-1ATN-K87 .....................26 DAJK15S*-1AJN......................117 015-8755-001.......................207 CA111972-22.........................98 DA15P-1AUN-K87 .....................26 DAJK15S*-1APN......................119 030-2042-002.......................195 CA112104...........................102 DA15P-1AVN-K87 .....................24 DAJK15S*-1ATN......................119 030-2487-016........................83 CA112104-1.........................102 DA15P-1AWN-K87.....................24 DAJK15S*-1AUN .....................119 030-2487-017........................83 CA112104-2.........................102 DA15P-F179A-K87.....................12 DAJK15S*-1AVN......................117 030-2488-016........................83 CA112104-3.........................102 DA15PK87...........................32 DAJK15S*-1AWN.....................117 030-2488-017........................83 CA112104-4.........................102 DA15S-0L2-A197......................11 DAJK15S*-1U0N .....................109 030-8848-020...................187, 195 CA112104-5.........................102 DA15S-1A5N-A197.....................27 DAJK15S*-1U7N......................113 030-8882-002...................187, 195 CCTP-750HM ........................84 DA15S-1A6N-A197.....................27 DAJK15S*-1U7N-146..................113 031-1007-052-05.....................195 CCTP-DM ...........................84 DA15S-1A7N-A197.....................23 DAJK15S*-OL4.......................121 031-1147-002 .......................195 D110277 ...........................212 DA15S-1A8N-A197.....................23 DAJKE15P*-1A0N.....................110 031-8787-020 ...................187, 195 D110278 ...........................212 DA15S-1A9N-A197.....................23 DAJKE15P*-1U0N ....................108 031-8843-001 ...................187, 195 D110279 ...........................212 DA15S-1ADN-A197 ....................25 DAJKE15P*-OL4 .....................120 031-8902-000.......................195 D110280 ...........................212 DA15S-1AFN-A197.....................23 DAJKE15P*-OL4-146..................120 031-8902-001.......................187 D110550 ...........................213 DA15S-1AJN-A197.....................25 DAJKE15S*-1A0N.....................111 031-8944-000 ...................187, 195 D110551............................213 DA15S-1AON-A197.....................21 DAJKE15S*-1U0N ....................109 070051-0000.........................89 D115418-70.........................195 DA15S-1ATN-A197.....................27 DAJKE15S*-OL4......................121 070064-0002 ........................88 D115433-1........................40, 82 DA15S-1AUN-A197 ....................27 DAJKE15S*-OL4-146..................121 075-0354-003.......................218 D115433-2........................40, 82 DA15S-1AVN-A197.....................25 DAJKX15P*-1A0N.....................110 110238-1012.........................84 D115433-3........................40, 82 DA15S-1AWN-A197....................25 DAJKX15P*-OL4 .....................120 110238-1013.........................84 D121073-19.........................201 DA15S-F179A-A197....................13 DAJKX15P*-OL4-146..................120 110238-1014.........................84 D121073-39.........................209 DA15SA197..........................33 DAJKX15S*-1A0N.....................111 110238-1015.........................84 D121073-40.........................209 DA19678-1 .........................204 DAJKX15S*-OL4......................121 248-2967-000........................95 D121073-41.........................209 DA19678-157........................195 DAJKX15S*-OL4-146..................121 249-2271-000........................84 D121073-42.........................209 DA19678-167....................193, 195 DAJT15P...........................122 249-2272-000........................84 D130322-1...........................84 DA19678-174........................195 DAJT15S*..........................123 250-8501-004.......................201 D130322-2 ..........................84 DA19977-1 .........................204 DAJT3W3P1.........................128 250-8501-009.......................201 D130322-6 ..........................84 DA19977-40.....................193, 195 DAJT3W3P1-1A0N....................124 250-8501-010 .......................201 D130344............................84 DA20961...........................203 DAJT3W3P1-OL4.....................126 250-8501-013 .......................201 D130344-1...........................84 DA20961-16.........................192 DAJT3W3P5 ........................128 259-8760-000.......................207 D130344-2 ..........................84 DA22213...........................215 DAJT3W3P5-1A0N....................124 274-5016-002.......................187 D130356............................85 DA22214...........................214 DAJT3W3P5-OL4.....................126 274-7003-000.......................187 D130356-1...........................85 DA24658...........................203 DAJT3W3P6 ........................128 274-7048-000.......................187 D130356-3 ..........................85 DA24658-15.....................192, 195 DAJT3W3P6-1A0N....................124 304-0444-000........................84 D130357............................85 DA50905-1 .........................218 DAJT3W3P6-OL4.....................126 304-8810-000.....................40, 82 D130357-1...........................85 DA51210...........................206 DAJT3W3P9 ........................128 304-8811-000.....................40, 82 D130357-4 ..........................85 DA51211...........................206 DAJT3W3P9-1A0N....................124 304-8812-000.....................40, 82 D20418-101......................194-195 DA51220-1..........................210 DAJT3W3P9-OL4.....................126 304-8813-000.....................40, 82 D20418-2 ..........................209 DA53750-1 .........................218 DAJT3W3S1.........................129 323-7010-000.......................187 D20418-39 .........................209 DAA11W1PK87F0......................80 DAJT3W3S1-1A0N....................125 330-5291-081-02.....................195 D20418-50 .........................209 DAA11W1SA197F0.....................81 DAJT3W3S1-OL4.....................127 330-8753-101........................41 D20418-52......................194-195 DAA15PK87FO........................36 DAJT3W3S5 ........................129 330-8753-102........................41 D20418-70..........................194 DAA15SA197FO.......................37 DAJT3W3S5-1AON....................125 330-8753-103........................41 D20418-74 .........................209 DAA3W3PK87F0......................80 DAJT3W3S5-OL4.....................127 330-8754-101........................41 D20418-80 .........................209 DAA3W3SA197F0 .....................81 DAJT3W3S6 ........................129 330-8754-102........................41 D20419............................208 DAA7W2PK87F0......................80 DAJT3W3S6-1A0N....................125 330-8754-103........................41 D20419-104.........................208 DAA7W2SA197F0 .....................81 DAJT3W3S6-OL4.....................127 330-8782-001...................187, 195 D20419-18..........................208 DABS-15...........................205 DAJT3W3S9 ........................129 330-8944-000.......................195 D20419-21..........................208 DABU111512 ........................216 DAJT3W3S9-1A0N....................125 330-8944-001.......................187 D20419-48......................194-195 DAE15P-0L2-K87-146 ..................10 DAJT3W3S9-OL4.....................127 980-0005-722.......................187 D20419-73......................194-195 DAE15PK87..........................32 DAJT3WK3P1........................128 980-0008-135........................83 D20419-74......................194-195 DAE15S-0L2-A197-146..................11 DAJT3WK3P1-1A0N...................124 980-0008-136........................83 D20419-84......................194-195 DAE15SA197.........................33 DAJT3WK3P1-OL4....................126 980-2000-345.......................202 D20420............................208 DAJK15P*-1A0N......................110 DAJT3WK3P5 .......................128 980-2000-346.......................202 D20420-13 .........................208 DAJK15P*-1A5N......................118 DAJT3WK3P5-1A0N...................124 980-2000-347.......................202 D20420-15 .........................208 DAJK15P*-1A6N......................118 DAJT3WK3P5-OL4....................126 980-2000-348.......................202 D20420-49......................194-195 DAJK15P*-1A7N......................114 DAJT3WK3P6 .......................128 980-2000-349.......................202 D20420-63......................194-195 DAJK15P*-1A8N......................114 DAJT3WK3P6-1A0N...................124 980-2000-426.......................187 D20420-67......................194-195 DAJK15P*-1A9N......................114 DAJT3WK3P6-OL4....................126 R 980-2000-858.......................209 D20420-86.........................208 DAJK15P*-1ADN .....................116 DAJT3WK3P9 .......................128 980-2000-859.......................209 D20420-88......................194-195 DAJK15P*-1AFN......................114 DAJT3WK3P9-1A0N...................124 e 980-2000-860.......................211 DA-59-20.......................195, 218 DAJK15P*-1AGN .....................116 DAJT3WK3P9-OL4....................126 a 980-2000-923........................83 DA-60-20.......................195, 218 DAJK15P*-1AHN .....................114 DAJT3WK3S1........................129 980-2000-924........................83 DA111806-1.........................216 DAJK15P*-1AJN......................116 DAJT3WK3S1-1A0N...................125 d 980-2000-925........................83 DA111806-5.........................216 DAJK15P*-1APN......................118 DAJT3WK3S1-OL4....................127 e 980-2000-926........................83 DA111810...........................216 DAJK15P*-1ATN......................118 DAJT3WK3S5 .......................129 980-2000-943........................83 DA111810-3.........................216 DAJK15P*-1AUN .....................118 DAJT3WK3S5-1AON ..................125 r 980-2000-944........................83 DA115339-1.........................207 DAJK15P*-1AVN......................116 DAJT3WK3S5-OL4....................127 ’ 980-2000-945........................83 DA115339-21........................205 DAJK15P*-1AWN.....................116 DAJT3WK3S6 .......................129 s 980-2000-946........................83 DA115386-104A......................195 DAJK15P*-1U0N .....................108 DAJT3WK3S6-1A0N...................125 995-0001-244.......................187 DA115386-2B .......................207 DAJK15P*-1U7N......................112 DAJT3WK3S6-OL4....................127 995-0001-325.......................187 DA121073-150.......................200 DAJK15P*-1U7N-146..................112 DAJT3WK3S9 .......................129 R 995-0001-584.......................187 DA121073-50 .......................200 DAJK15P*-OL4 ......................120 DAJT3WK3S9-1A0N...................125 995-0001-585.......................187 DA15P-0L2-K87.......................10 DAJK15S*-1A0N......................111 DAJT3WK3S9-OL4....................127 e 995-0001-604.......................187 DA15P-1A5N-K87 .....................26 DAJK15S*-1A5N......................119 DAJTE15P ..........................122 995-0001-739.......................187 DA15P-1A6N-K87 .....................26 DAJK15S*-1A6N......................119 DAJTE15S* .........................123 s 995-0001-761........................85 DA15P-1A7N-K87 .....................22 DAJK15S*-1A7N......................115 DAJTE3W3P1........................128 o 995-2000-000........................83 DA15P-1A8N-K87 .....................22 DAJK15S*-1A8N......................115 DAJTE3W3P1-1A0N...................124 995-2000-092.......................211 DA15P-1A9N-K87 .....................22 DAJK15S*-1A9N......................115 DAJTE3W3P1-OL4....................126 u 995-2000-094........................84 DA15P-1ADN-K87.....................24 DAJK15S*-1ADN .....................117 DAJTE3W3P5 .......................128 r 995-2000-110........................85 DA15P-1AFN-K87......................22 DAJK15S*-1AFN......................115 DAJTE3W3P5-1A0N...................124 ABT-607............................84 DA15P-1AJN-K87......................24 DAJK15S*-1AGN .....................117 DAJTE3W3P5-OL4....................126 c CA111972-11.........................98 DA15P-1AON-K87.....................20 DAJK15S*-1AHN .....................115 DAJTE3W3P6 .......................128 e Dimensions are shown in mm (inch) Dimensions subject to change 283

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DAJTE3W3P6-1A0N...................124 DAJTX3WK3S5-1AON .................125 DAM15PF...........................134 DAM7W2PNMBK52...................195 DAJTE3W3P6-OL4....................126 DAJTX3WK3S5-OL4...................127 DAM15PF179........................138 DAM7W2POL3NMBK52................195 DAJTE3W3P9 .......................128 DAJTX3WK3S6 ......................129 DAM15PF179A.......................138 DAM7W2S-NMC-77...................195 DAJTE3W3P9-1A0N...................124 DAJTX3WK3S6-1A0N..................125 DAM15PF179ANMBK52................195 DAM7W2S1A0NNMBK52...............195 DAJTE3W3P9-OL4....................126 DAJTX3WK3S6-OL4...................127 DAM15PG ..........................132 DAM7W2S1A7NNMBK52...............195 DAJTE3W3S1........................129 DAJTX3WK3S9 ......................129 DAM15PH ..........................136 DAM7W2S1A9NNMBK52...............195 DAJTE3W3S1-1A0N...................125 DAJTX3WK3S9-1A0N..................125 DAM15PK ..........................134 DAM7W2SA197.......................79 DAJTE3W3S1-OL4....................127 DAJTX3WK3S9-OL4...................127 DAM15PL...........................132 DAM7W2SF179ANMBK52..............195 DAJTE3W3S5 .......................129 DAM-11W1P-1A0N-K87.................74 DAM15PLNM........................174 DAM7W2SNM.......................189 DAJTE3W3S5-1AON...................125 DAM-11W1P-1A7N-K87.................74 DAM15PM..........................136 DAM7W2SNMBK52...................195 DAJTE3W3S5-OL4....................127 DAM-11W1P-NMB-76..................195 DAM15PNM.........................180 DAM7W2SOL3NMBK52................195 DAJTE3W3S6 .......................129 DAM-11W1P-NMB-77..................195 DAM15PNM*1A7N....................178 DAMA15PNM........................182 DAJTE3W3S6-1A0N...................125 DAM-11W1P-NMC-76..................195 DAM15PNM*1A9N....................178 DAMA15PNMBK52....................195 DAJTE3W3S6-OL4....................127 DAM-11W1P-NMC-77..................195 DAM15PNM*1AON....................176 DAMA15SNM........................183 DAJTE3W3S9 .......................129 DAM-11W1P-OL2-K87..................76 DAM15PNMB76......................195 DAMA15SNMBK52....................195 DAJTE3W3S9-1A0N...................125 DAM-11W1P-OL4-K87..................76 DAM15PNMB77......................195 DAMA26PNM........................184 DAJTE3W3S9-OL4....................127 DAM-11W1S-1A0N-A197 ................75 DAM15PNMBK52.....................195 DAMA26SNM........................185 DAJTE3WK3P1.......................128 DAM-11W1S-1A7N-A197 ................75 DAM15PNMC76......................195 DAMAY15PNM.......................182 DAJTE3WK3P1-1A0N..................124 DAM-11W1S-NMB-76..................195 DAM15PNMC77......................195 DAMAY15SNM.......................183 DAJTE3WK3P1-OL4...................126 DAM-11W1S-NMB-77..................195 DAM15POL3NM......................172 DAMAY26PNM.......................184 DAJTE3WK3P5 ......................128 DAM-11W1S-NMC-76..................195 DAM15POL3NMBK52..................195 DAMAY26SNM.......................185 DAJTE3WK3P5-1A0N..................124 DAM-11W1S-NMC-77..................195 DAM15PP...........................134 DAMB-11W1S-NMB-77.................195 DAJTE3WK3P5-OL4...................126 DAM-11W1S-OL2-A197.................77 DAM15PR ..........................134 DAMB-15S-NMC-77...................195 DAJTE3WK3P6 ......................128 DAM-11W1S-OL4-A197.................77 DAM15PS ..........................132 DAMB-7W2S-NMB-76.................195 DAJTE3WK3P6-1A0N..................124 DAM-15S-NMB-76....................195 DAM15PW..........................132 DAMB-7W2S-NMB-77.................195 DAJTE3WK3P6-OL4...................126 DAM-15S-NMC-76....................195 DAM15PX...........................136 DAMB15SNMB77.....................195 DAJTE3WK3P9 ......................128 DAM-3W3P-1A0N-K87 .................74 DAM15PZ...........................136 DAMB15SNMC76.....................195 DAJTE3WK3P9-1A0N..................124 DAM-3W3P-1A7N-K87 .................74 DAM15S............................141 DAMC11C1PJK87......................44 DAJTE3WK3P9-OL4...................126 DAM-3W3P-NMB-76..................195 DAM15S1A0NNMBK52.................195 DAMC11C1PVK87 .....................50 DAJTE3WK3S1.......................129 DAM-3W3P-NMC-76..................195 DAM15S1A7NNMBK52.................195 DAMC11C1SJA197.....................45 DAJTE3WK3S1-1A0N..................125 DAM-3W3P-OL2-K87 ..................76 DAM15S1A9NNMBK52.................195 DAMC11C1SVA197.....................51 DAJTE3WK3S1-OL4...................127 DAM-3W3P-OL4-K87 ..................76 DAM15SA ..........................133 DAMC11H1PJK87......................60 DAJTE3WK3S5 ......................129 DAM-3W3S-1A0N-A197.................75 DAM15SB ..........................137 DAMC11H1SJA197.....................61 DAJTE3WK3S5-1AON .................125 DAM-3W3S-1A7N-A197.................75 DAM15SC ..........................135 DAMC11P1PVK87 .....................64 DAJTE3WK3S5-OL4...................127 DAM-3W3S-NMC-76..................195 DAM15SD ..........................133 DAMC11P1SVA197.....................65 DAJTE3WK3S6 ......................129 DAM-3W3S-OL2-A197..................77 DAM15SE...........................137 DAMC15PJK87........................16 DAJTE3WK3S6-1A0N..................125 DAM-3W3S-OL4-A197..................77 DAM15SF...........................135 DAMC15SJA197.......................17 DAJTE3WK3S6-OL4...................127 DAM-3WK3P-1A0N-K87 ................74 DAM15SF179........................139 DAMC3C3PJK87......................44 DAJTE3WK3S9 ......................129 DAM-3WK3P-1A7N-K87 ................74 DAM15SF179A.......................139 DAMC3C3PVK87......................50 DAJTE3WK3S9-1A0N..................125 DAM-3WK3P-OL2-K87 .................76 DAM15SF179ANMBK52................195 DAMC3C3SJA197.....................45 DAJTE3WK3S9-OL4...................127 DAM-3WK3P-OL4-K87 .................76 DAM15SG ..........................133 DAMC3C3SVA197.....................51 DAJTX15P ..........................122 DAM-3WK3S-1A0N-A197................75 DAM15SH ..........................137 DAMC3CK3PJK87TM ..................44 DAJTX15S*.........................123 DAM-3WK3S-1A7N-A197................75 DAM15SK ..........................135 DAMC3CK3PVK87TM ..................50 DAJTX3W3KP1-1A0N..................124 DAM-3WK3S-OL2-A197 ................77 DAM15SL...........................133 DAMC3CK3SJA197TM..................45 DAJTX3W3P1........................128 DAM-3WK3S-OL4-A197 ................77 DAM15SLNM........................175 DAMC3CK3SVA197TM..................51 DAJTX3W3P1-1A0N...................124 DAM-7W2P-1A0N-K87 .................74 DAM15SM..........................137 DAMC3H3PJK87......................60 DAJTX3W3P1-OL4....................126 DAM-7W2P-1A7N-K87 .................74 DAM15SNM.........................181 DAMC3H3SJA197 .....................61 DAJTX3W3P5 .......................128 DAM-7W2P-NMB-76..................195 DAM15SNM*1A7N....................179 DAMC3HK3PJK87TM ..................60 DAJTX3W3P5-1A0N...................124 DAM-7W2P-NMB-77..................195 DAM15SNM*1A9N....................179 DAMC3HK3SJA197TM..................61 DAJTX3W3P5-OL4....................126 DAM-7W2P-NMC-76..................195 DAM15SNM*1AON....................177 DAMC3P3PVK87......................64 DAJTX3W3P6 .......................128 DAM-7W2P-OL2-K87 ..................76 DAM15SNMB77......................195 DAMC3P3SVA197.....................65 DAJTX3W3P6-1A0N...................124 DAM-7W2P-OL4-K87 ..................76 DAM15SNMBK52.....................195 DAMC3PK3PVK87TM ..................64 DAJTX3W3P6-OL4....................126 DAM-7W2S-1A0N-A197.................75 DAM15SOL3NM......................173 DAMC3PK3SVA197TM .................65 DAJTX3W3P9 .......................128 DAM-7W2S-1A7N-A197.................75 DAM15SOL3NMBK52..................195 DAMC7C2PJK87......................44 DAJTX3W3P9-1A0N...................124 DAM-7W2S-NMB-77..................195 DAM15SP ..........................135 DAMC7C2PVK87......................50 DAJTX3W3P9-OL4....................126 DAM-7W2S-NMC-76..................195 DAM15SR ..........................135 DAMC7C2SJA197.....................45 DAJTX3W3S1........................129 DAM-7W2S-OL2-A197..................77 DAM15SS ..........................133 DAMC7C2SVA197.....................51 DAJTX3W3S1-1A0N...................125 DAM-7W2S-OL4-A197..................77 DAM15SW..........................133 DAMC7H2PJK87......................60 e DAJTX3W3S1-OL4....................127 DAM11W1P1A0NNMBK52...............195 DAM15SX...........................137 DAMC7H2SJA197 .....................61 c DAJTX3W3S5 .......................129 DAM11W1P1A7NNMBK52...............195 DAM15SZ...........................137 DAMC7P2PVK87......................64 DAJTX3W3S5-1AON...................125 DAM11W1P1A9NNMBK52...............195 DAM3W3P-NMC-77...................195 DAMC7P2SVA197.....................65 r DAJTX3W3S5-OL4....................127 DAM11W1PF179ANMBK52..............195 DAM3W3PK87........................78 DAMD11C1PJK87......................44 u DAJTX3W3S6 .......................129 DAM11W1PK87.......................78 DAM3W3PNM.......................188 DAMD11C1PVK87 .....................50 DAJTX3W3S6-1A0N...................125 DAM11W1PNM.......................188 DAM3W3PNMBK52...................195 DAMD11C1SJA197.....................45 o DAJTX3W3S6-OL4....................127 DAM11W1PNMBK52...................195 DAM3W3PNMC76....................195 DAMD11C1SVA197.....................51 DAJTX3W3S9 .......................129 DAM11W1POL3NMBK52 ...............195 DAM3W3POL3NMBK52................195 DAMD11H1PJK87......................60 s DAJTX3W3S9-1A0N...................125 DAM11W1S1A0NNMBK52...............195 DAM3W3S-NMC-76...................195 DAMD11H1SJA197.....................61 e DAJTX3W3S9-OL4....................127 DAM11W1S1A7NNMBK52...............195 DAM3W3SA197.......................79 DAMD11P1PVK87 .....................64 R DAJTX3WK3P1.......................128 DAM11W1S1A9NNMBK52...............195 DAM3W3SNM.......................189 DAMD11P1SVA197.....................65 DAJTX3WK3P1-OL4...................126 DAM11W1SA197 ......................79 DAM3W3SNMB76....................195 DAMD15PJK87 .......................16 DAJTX3WK3P5 ......................128 DAM11W1SF179ANMBK52..............195 DAM3W3SNMB77....................195 DAMD15SJA197.......................17 DAJTX3WK3P5-1A0N..................124 DAM11W1SNM.......................189 DAM3W3SNMBK52...................195 DAMD3C3PJK87......................44 s DAJTX3WK3P5-OL4...................126 DAM11W1SNMBK52...................195 DAM3WK3PK87 ......................78 DAMD3C3PVK87......................50 ’ DAJTX3WK3P6 ......................128 DAM11W1SOL3NMBK52 ...............195 DAM3WK3PNM......................188 DAMD3C3SJA197.....................45 r DAJTX3WK3P6-1A0N..................124 DAM15P............................140 DAM3WK3SA197......................79 DAMD3C3SVA197.....................51 DAJTX3WK3P6-OL4...................126 DAM15P1A0NNMBK52.................195 DAM3WK3SNM......................189 DAMD3CK3PJK87TM ..................44 e DAJTX3WK3P9 ......................128 DAM15P1A7NNMBK52.................195 DAM53512-1405......................49 DAMD3CK3PVK87TM..................50 d DAJTX3WK3P9-1A0N..................124 DAM15P1A9NNMBK52.................195 DAM7W2P1A0NNMBK52...............195 DAMD3CK3SJA197TM..................45 DAJTX3WK3P9-OL4...................126 DAM15PA ..........................132 DAM7W2P1A7NNMBK52...............195 DAMD3CK3SVA197TM..................51 a DAJTX3WK3S1.......................129 DAM15PB ..........................136 DAM7W2P1A9NNMBK52...............195 DAMD3H3PJK87......................60 e DAJTX3WK3S1-1A0N..................125 DAM15PC ..........................134 DAM7W2PF179ANMBK52 ..............195 DAMD3H3SJA197 .....................61 DAJTX3WK3S1-OL4...................127 DAM15PD ..........................132 DAM7W2PK87........................78 DAMD3HK3PJK87TM ..................60 R DAJTX3WK3S5 ......................129 DAM15PE...........................136 DAM7W2PNM.......................188 DAMD3HK3SJA197TM..................61 Dimensions are shown in mm (inch) 284 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DAMD3P3PVK87......................64 DAMM15SE.........................137 DAMMN11V1PN......................162 DAMMZ3HK3SN......................159 DAMD3P3SVA197.....................65 DAMM15SF.........................135 DAMMN11V1SN......................163 DAMMZ3V3PN.......................162 DAMD3PK3PVK87TM ..................64 DAMM15SF179 ......................139 DAMMN3C3PN ......................150 DAMMZ3V3SN.......................163 DAMD3PK3SVA197TM .................65 DAMM15SF179A .....................139 DAMMN3C3SN.......................151 DAMMZ3VK3PN......................162 DAMD7C2PJK87......................44 DAMM15SG.........................133 DAMMN3CK3PN .....................150 DAMMZ3VK3SN......................163 DAMD7C2PVK87......................50 DAMM15SH.........................137 DAMMN3CK3SN......................151 DAMMZ7C2PN.......................150 DAMD7C2SJA197.....................45 DAMM15SK.........................135 DAMMN3H3PN ......................158 DAMMZ7C2SN.......................151 DAMD7C2SVA197.....................51 DAMM15SL.........................133 DAMMN3H3SN ......................159 DAMMZ7H2PN.......................158 DAMD7H2PJK87......................60 DAMM15SM.........................137 DAMMN3HK3PN .....................158 DAMMZ7H2SN.......................159 DAMD7H2SJA197 .....................61 DAMM15SP.........................135 DAMMN3HK3SN .....................159 DAMMZ7V2PN.......................162 DAMD7P2PVK87......................64 DAMM15SR.........................135 DAMMN3V3PN.......................162 DAMMZ7V2SN.......................163 DAMD7P2SVA197.....................65 DAMM15SS.........................133 DAMMN3V3SN.......................163 DAMN11C1PNK87 .....................52 DAME11W1PK87......................78 DAMM15SW ........................133 DAMMN3VK3PN .....................162 DAMN11C1PYK87 .....................56 DAME11W1SA197 .....................79 DAMM15SX.........................137 DAMMN3VK3SN .....................163 DAMN11C1SNA197 ....................53 DAME15P...........................140 DAMM15SZ.........................137 DAMMN7C2PN ......................150 DAMN11C1SYA197.....................57 DAME15S...........................141 DAMM3W3P ........................166 DAMMN7C2SN.......................151 DAMN11H1PNK87.....................66 DAME3W3PK87.......................78 DAMM3W3S ........................167 DAMMN7H2PN ......................158 DAMN11H1PYK87 .....................70 DAME3W3SA197......................79 DAMM3WK3P.......................166 DAMMN7H2SN ......................159 DAMN11H1SNA197 ....................67 DAME3WK3PK87 .....................78 DAMM3WK3S.......................167 DAMMN7V2PN.......................162 DAMN11H1SYA197.....................71 DAME3WK3SA197.....................79 DAMM7W2P ........................166 DAMMN7V2SN.......................163 DAMN15PNK87........................6 DAME7W2PK87.......................78 DAMM7W2S ........................167 DAMMP11C1PJ ......................146 DAMN15SNA197.......................7 DAME7W2SA197......................79 DAMMC11C1PJ ......................146 DAMMP11C1SJ ......................147 DAMN3C3PNK87......................52 DAMG11C1PJK87......................44 DAMMC11C1SJ ......................147 DAMMP11H1PJ ......................154 DAMN3C3PYK87......................56 DAMG11C1PVK87 .....................50 DAMMC11H1PJ ......................154 DAMMP11H1SJ ......................155 DAMN3C3SNA197.....................53 DAMG11C1SJA197.....................45 DAMMC11H1SJ ......................155 DAMMP3C3PJ.......................146 DAMN3C3SYA197.....................57 DAMG11C1SVA197.....................51 DAMMC3C3PJ.......................146 DAMMP3C3SJ.......................147 DAMN3CK3PNK87TM..................52 DAMG11H1PJK87 .....................60 DAMMC3C3SJ.......................147 DAMMP3CK3PJ......................146 DAMN3CK3PYK87TM ..................56 DAMG11H1SJA197.....................61 DAMMC3CK3PJ......................146 DAMMP3CK3SJ......................147 DAMN3CK3SNA197TM .................53 DAMG11P1PVK87 .....................64 DAMMC3CK3SJ......................147 DAMMP3H3PJ.......................154 DAMN3CK3SYA197TM .................57 DAMG11P1SVA197.....................65 DAMMC3H3PJ.......................154 DAMMP3H3SJ.......................155 DAMN3H3PNK87......................66 DAMG15PJK87 .......................16 DAMMC3H3SJ.......................155 DAMMP3HK3PJ......................154 DAMN3H3PYK87......................70 DAMG15SJA197.......................17 DAMMC3HK3PJ......................154 DAMMP3HK3SJ......................155 DAMN3H3SNA197.....................67 DAMG3C3PJK87......................44 DAMMC3HK3SJ......................155 DAMMP7C2PJ.......................146 DAMN3H3SYA197.....................71 DAMG3C3PVK87......................50 DAMMC7C2PJ.......................146 DAMMP7C2SJ.......................147 DAMN3HK3PNK87TM..................66 DAMG3C3SJA197.....................45 DAMMC7C2SJ.......................147 DAMMP7H2PJ.......................154 DAMN3HK3PYK87TM..................70 DAMG3C3SVA197.....................51 DAMMC7H2PJ.......................154 DAMMP7H2SJ.......................155 DAMN3HK3SNA197TM .................67 DAMG3CK3PJK87TM ..................44 DAMMC7H2SJ.......................155 DAMMV11C1PN......................150 DAMN3HK3SYA197TM..................71 DAMG3CK3PVK87TM..................50 DAMMD11C1PJ ......................146 DAMMV11C1SN ......................151 DAMN7C2PNK87......................52 DAMG3CK3SJA197TM..................45 DAMMD11C1SJ ......................147 DAMMV11H1PN......................158 DAMN7C2PYK87......................56 DAMG3CK3SVA197TM..................51 DAMMD11H1PJ ......................154 DAMMV11H1SN......................159 DAMN7C2SNA197.....................53 DAMG3H3PJK87......................60 DAMMD11H1SJ ......................155 DAMMV11V1PN ......................162 DAMN7C2SYA197.....................57 DAMG3H3SJA197 .....................61 DAMMD3C3PJ.......................146 DAMMV11V1SN......................163 DAMN7H2PNK87......................66 DAMG3HK3PJK87TM ..................60 DAMMD3C3SJ.......................147 DAMMV3C3PN.......................150 DAMN7H2PYK87......................70 DAMG3HK3SJA197TM..................61 DAMMD3CK3PJ......................146 DAMMV3C3SN.......................151 DAMN7H2SNA197.....................67 DAMG3P3PVK87......................64 DAMMD3CK3SJ......................147 DAMMV3CK3PN .....................150 DAMN7H2SYA197.....................71 DAMG3P3SVA197.....................65 DAMMD3H3PJ.......................154 DAMMV3CK3SN......................151 DAMP11C1PJK87......................44 DAMG3PK3PVK87TM ..................64 DAMMD3H3SJ.......................155 DAMMV3H3PN.......................158 DAMP11C1PVK87 .....................50 DAMG3PK3SVA197TM .................65 DAMMD3HK3PJ......................154 DAMMV3H3SN ......................159 DAMP11C1SJA197.....................45 DAMG7C2PJK87......................44 DAMMD3HK3SJ......................155 DAMMV3HK3PN .....................158 DAMP11C1SVA197.....................51 DAMG7C2PVK87......................50 DAMMD7C2PJ.......................146 DAMMV3HK3SN .....................159 DAMP11H1PJK87......................60 DAMG7C2SJA197.....................45 DAMMD7C2SJ.......................147 DAMMV3V3PN.......................162 DAMP11H1SJA197.....................61 DAMG7C2SVA197.....................51 DAMMD7H2PJ.......................154 DAMMV3V3SN.......................163 DAMP11P1PVK87......................64 DAMG7H2PJK87......................60 DAMMD7H2SJ.......................155 DAMMV3VK3PN......................162 DAMP11P1SVA197.....................65 DAMG7H2SJA197 .....................61 DAMME11W1P.......................166 DAMMV3VK3SN......................163 DAMP15PJK87........................16 DAMG7P2PVK87......................64 DAMME11W1S.......................167 DAMMV7C2PN.......................150 DAMP15SJA197.......................17 DAMG7P2SVA197.....................65 DAMME15P.........................140 DAMMV7C2SN.......................151 DAMP3C3PJK87......................44 DAMM11W1P........................166 DAMME15S .........................141 DAMMV7H2PN.......................158 DAMP3C3PVK87......................50 DAMM11W1S........................167 DAMME3W3P .......................166 DAMMV7H2SN ......................159 DAMP3C3SJA197 .....................45 DAMM15P..........................140 DAMME3W3S .......................167 DAMMV7V2PN.......................162 DAMP3C3SVA197.....................51 R DAMM15PA.........................132 DAMME3WK3P ......................166 DAMMV7V2SN.......................163 DAMP3CK3PJK87TM...................44 DAMM15PB.........................136 DAMME3WK3S ......................167 DAMMY11W1P.......................166 DAMP3CK3PVK87TM ..................50 e DAMM15PC.........................134 DAMME7W2P .......................166 DAMMY11W1S.......................167 DAMP3CK3SJA197TM..................45 a DAMM15PD.........................132 DAMME7W2S .......................167 DAMMY15P.........................140 DAMP3CK3SVA197TM..................51 DAMM15PE.........................136 DAMMG11C1PJ ......................146 DAMMY15S .........................141 DAMP3H3PJK87......................60 d DAMM15PF.........................134 DAMMG11C1SJ ......................147 DAMMY3W3P .......................166 DAMP3H3SJA197 .....................61 e DAMM15PF179 ......................138 DAMMG11H1PJ ......................154 DAMMY3W3S .......................167 DAMP3HK3PJK87TM ..................60 DAMM15PF179A .....................138 DAMMG11H1SJ ......................155 DAMMY3WK3P......................166 DAMP3HK3SJA197TM..................61 r DAMM15PG.........................132 DAMMG3C3PJ.......................146 DAMMY3WK3S......................167 DAMP3P3PVK87......................64 ’ DAMM15PH.........................136 DAMMG3C3SJ.......................147 DAMMY7W2P .......................166 DAMP3P3SVA197.....................65 s DAMM15PK.........................134 DAMMG3CK3PJ......................146 DAMMY7W2S .......................167 DAMP3PK3PVK87TM ..................64 DAMM15PL.........................132 DAMMG3CK3SJ......................147 DAMMZ11C1PN ......................150 DAMP3PK3SVA197TM..................65 DAMM15PM.........................136 DAMMG3H3PJ.......................154 DAMMZ11C1SN.......................151 DAMP7C2PJK87......................44 R DAMM15PP.........................134 DAMMG3H3SJ.......................155 DAMMZ11H1PN ......................158 DAMP7C2PVK87......................50 DAMM15PR.........................134 DAMMG3HK3PJ......................154 DAMMZ11H1SN ......................159 DAMP7C2SJA197 .....................45 e DAMM15PS.........................132 DAMMG3HK3SJ......................155 DAMMZ11V1PN ......................162 DAMP7C2SVA197.....................51 DAMM15PW.........................132 DAMMG7C2PJ.......................146 DAMMZ11V1SN ......................163 DAMP7H2PJK87......................60 s DAMM15PX.........................136 DAMMG7C2SJ.......................147 DAMMZ3C3PN.......................150 DAMP7H2SJA197 .....................61 o DAMM15PZ.........................136 DAMMG7H2PJ.......................154 DAMMZ3C3SN.......................151 DAMP7P2PVK87......................64 DAMM15S ..........................141 DAMMG7H2SJ.......................155 DAMMZ3CK3PN......................150 DAMP7P2SVA197.....................65 u DAMM15SA.........................133 DAMMN11C1PN......................150 DAMMZ3CK3SN......................151 DAMV11C1PNK87 .....................52 r DAMM15SB.........................137 DAMMN11C1SN ......................151 DAMMZ3H3PN.......................158 DAMV11C1PYK87......................56 DAMM15SC.........................135 DAMMN11H1PN......................158 DAMMZ3H3SN.......................159 DAMV11C1SNA197.....................53 c DAMM15SD.........................133 DAMMN11H1SN......................159 DAMMZ3HK3PN......................158 DAMV11C1SYA197.....................57 e Dimensions are shown in mm (inch) Dimensions subject to change 285

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DAMV11H1PNK87 .....................66 DAMZ7C2SYA197 .....................57 DB25SA197..........................33 DBJTX25P..........................122 DAMV11H1PYK87 .....................70 DAMZ7H2PNK87......................66 DB50906-1 .........................218 DBJTX25S*.........................123 DAMV11H1SNA197 ....................67 DAMZ7H2PYK87......................70 DB51212...........................206 DBM-13W3P-1A0N-K87.................74 DAMV11H1SYA197.....................71 DAMZ7H2SNA197.....................67 DB51213...........................206 DBM-13W3P-1A7N-K87.................74 DAMV15PNK87........................6 DAMZ7H2SYA197 .....................71 DB51221-1..........................210 DBM-13W3P-NMB-76 .................195 DAMV15SNA197 .......................7 DANG15P-P1..........................4 DB51226-1B ........................206 DBM-13W3P-NMC-76 .................195 DAMV3C3PNK87......................52 DANG15S-P1..........................5 DB53750-2 .........................218 DBM-13W3P-OL2-K87..................76 DAMV3C3PYK87......................56 DANGE15P-P1.........................4 DBA13W3PK87F0 .....................80 DBM-13W3P-OL4-K87..................76 DAMV3C3SNA197.....................53 DANGE15S-P1.........................5 DBA13W3SA197F0.....................81 DBM-13W3S-1A0N-A197................75 DAMV3C3SYA197.....................57 DANGL15P-P1.........................4 DBA17W2PK87F0 .....................80 DBM-13W3S-1A7N-A197................75 DAMV3CK3PNK87TM..................52 DANGL15S-P1.........................5 DBA17W2SA197F0.....................81 DBM-13W3S-NMB-77 .................195 DAMV3CK3PYK87TM ..................56 DANGX15P-P1.........................4 DBA21W1PK87F0 .....................80 DBM-13W3S-NMC-76 .................195 DAMV3CK3SNA197TM .................53 DANGX15S-P1.........................5 DBA21W1SA197F0.....................81 DBM-13W3S-OL2-A197.................77 DAMV3CK3SYA197TM..................57 DANGZ15P-P1.........................4 DBA25PK87FO .......................36 DBM-13W3S-OL4-A197.................77 DAMV3H3PNK87......................66 DANGZ15S-P1.........................5 DBA25SA197FO.......................37 DBM-17W2P-1A0N-K87.................74 DAMV3H3PYK87......................70 DAW15P* ...........................38 DBA5W5PK87F0......................80 DBM-17W2P-1A7N-K87.................74 DAMV3H3SNA197.....................67 DAW15P*G..........................38 DBA5W5SA197F0 .....................81 DBM-17W2P-NMB-76 .................195 DAMV3H3SYA197 .....................71 DAW15S* ...........................39 DBA9W4PK87F0......................80 DBM-17W2P-NMC-76 .................195 DAMV3HK3PNK87TM..................66 DAW15S*G..........................39 DBA9W4SA197F0 .....................81 DBM-17W2P-OL2-K87..................76 DAMV3HK3PYK87TM ..................70 DAWE15P* ..........................38 DBBS-25...........................205 DBM-17W2P-OL4-K87..................76 DAMV3HK3SNA197TM .................67 DAWE15P*G.........................38 DBBU111511.........................216 DBM-17W2S-1A0N-A197................75 DAMV3HK3SYA197TM..................71 DAWE15S* ..........................39 DBE25P-0L2-K87-146..................10 DBM-17W2S-1A7N-A197................75 DAMV7C2PNK87......................52 DAWE15S*G.........................39 DBE25PK87..........................32 DBM-17W2S-NMC-76 .................195 DAMV7C2PYK87......................56 DAX15P-0L2-K87-146 ..................10 DBE25S-0L2-A197-146 .................11 DBM-17W2S-NMC-77 .................195 DAMV7C2SNA197.....................53 DAX15PK87..........................32 DBE25SA197.........................33 DBM-17W2S-OL2-A197.................77 DAMV7C2SYA197.....................57 DAX15S-0L2-A197-146..................11 DBJK25P*-1A0N .....................110 DBM-17W2S-OL4-A197.................77 DAMV7H2PNK87......................66 DAX15SA197.........................33 DBJK25P*-1A5N .....................118 DBM-21W1P-1A0N-K87.................74 DAMV7H2PYK87......................70 DB-59-20.......................195, 218 DBJK25P*-1A6N .....................118 DBM-21W1P-1A7N-K87.................74 DAMV7H2SNA197.....................67 DB-60-20.......................195, 218 DBJK25P*-1A7N .....................114 DBM-21W1P-NMB-76..................195 DAMV7H2SYA197 .....................71 DB111807-1.........................216 DBJK25P*-1A8N .....................114 DBM-21W1P-NMB-77..................195 DAMY11W1PK87......................78 DB111807-5.........................216 DBJK25P*-1A9N .....................114 DBM-21W1P-OL2-K87..................76 DAMY11W1PNM......................188 DB111811...........................216 DBJK25P*-1ADN .....................116 DBM-21W1P-OL4-K87..................76 DAMY11W1SA197 .....................79 DB111811-2 .........................216 DBJK25P*-1AFN......................114 DBM-21W1S-1A0N-A197................75 DAMY11W1SNM......................189 DB111949-43.........................48 DBJK25P*-1AGN .....................116 DBM-21W1S-1A7N-A197................75 DAMY15P...........................140 DB115339-2 ........................207 DBJK25P*-1AHN .....................114 DBM-21W1S-NMB-76..................195 DAMY15PNM........................180 DB115339-22 .......................205 DBJK25P*-1AJN......................116 DBM-21W1S-NMB-77..................195 DAMY15PNM*1AON...................176 DB115386-102A......................195 DBJK25P*-1APN .....................118 DBM-21W1S-NMC-76 .................195 DAMY15POL3NM.....................172 DB115386-3B .......................207 DBJK25P*-1ATN .....................118 DBM-21W1S-OL2-A197.................77 DAMY15S...........................141 DB121073-151.......................200 DBJK25P*-1AUN .....................118 DBM-21W1S-OL4-A197.................77 DAMY15SNM........................181 DB121073-51........................200 DBJK25P*-1AVN .....................116 DBM-25S-NMB-76....................195 DAMY15SNM*1AON...................177 DB19678-168....................193, 195 DBJK25P*-1AWN.....................116 DBM-25S-NMC-76....................195 DAMY15SOL3NM.....................173 DB19678-171........................195 DBJK25P*-1U0N.....................108 DBM-25S-NMC-77....................195 DAMY3W3PK87.......................78 DB19678-175........................195 DBJK25P*-1U7N .....................112 DBM-5W5P-1A0N-K87 .................74 DAMY3W3PNM......................188 DB19678-2 .........................204 DBJK25P*-1U7N-146..................112 DBM-5W5P-1A7N-K87 .................74 DAMY3W3SA197......................79 DB19977-2 .........................204 DBJK25P*-OL4......................120 DBM-5W5P-NMB-76..................195 DAMY3W3SNM......................189 DB19977-43.....................193, 195 DBJK25S*-1A0N......................111 DBM-5W5P-NMC-76..................195 DAMY3WK3PK87 .....................78 DB20962...........................203 DBJK25S*-1A5N .....................119 DBM-5W5P-NMC-77..................195 DAMY3WK3PNM.....................188 DB20962-18 ........................192 DBJK25S*-1A6N .....................119 DBM-5W5P-OL2-K87 ..................76 DAMY3WK3SA197.....................79 DB22254...........................214 DBJK25S*-1A7N .....................115 DBM-5W5P-OL4-K87 ..................76 DAMY3WK3SNM.....................189 DB22255...........................215 DBJK25S*-1A8N .....................115 DBM-5W5S-1A0N-A197.................75 DAMY7W2PK87.......................78 DB24659...........................203 DBJK25S*-1A9N .....................115 DBM-5W5S-1A7N-A197.................75 DAMY7W2PNM......................188 DB24659-15.....................192, 195 DBJK25S*-1ADN .....................117 DBM-5W5S-NMB-76..................195 DAMY7W2SA197......................79 DB25P-0L2-K87.......................10 DBJK25S*-1AFN......................115 DBM-5W5S-NMB-77..................195 DAMY7W2SNM......................189 DB25P-1A5N-K87.....................26 DBJK25S*-1AGN.....................117 DBM-5W5S-NMC-76..................195 DAMZ11C1PNK87......................52 DB25P-1A6N-K87.....................26 DBJK25S*-1AHN .....................115 DBM-5W5S-NMC-77..................195 DAMZ11C1PYK87......................56 DB25P-1A7N-K87.....................22 DBJK25S*-1AJN......................117 DBM-5W5S-OL2-A197..................77 DAMZ11C1SNA197.....................53 DB25P-1A8N-K87.....................22 DBJK25S*-1APN .....................119 DBM-5W5S-OL4-A197..................77 DAMZ11C1SYA197.....................57 DB25P-1A9N-K87.....................22 DBJK25S*-1ATN .....................119 DBM-9W4P-1A0N-K87 .................74 e DAMZ11H1PNK87 .....................66 DB25P-1ADN-K87.....................24 DBJK25S*-1AUN .....................119 DBM-9W4P-1A7N-K87 .................74 c DAMZ11H1PYK87......................70 DB25P-1AFN-K87 .....................22 DBJK25S*-1AVN .....................117 DBM-9W4P-NMB-77..................195 DAMZ11H1SNA197.....................67 DB25P-1AJN-K87 .....................24 DBJK25S*-1AWN.....................117 DBM-9W4P-NMC-76..................195 r DAMZ11H1SYA197.....................71 DB25P-1AON-K87.....................20 DBJK25S*-1U0N.....................109 DBM-9W4P-OL2-K87 ..................76 u DAMZ15PNK87 ........................6 DB25P-1ATN-K87 .....................26 DBJK25S*-1U7N .....................113 DBM-9W4P-OL4-K87 ..................76 DAMZ15SNA197 .......................7 DB25P-1AUN-K87.....................26 DBJK25S*-1U7N-146..................113 DBM-9W4S-1A0N-A197.................75 o DAMZ3C3PNK87......................52 DB25P-1AVN-K87.....................24 DBJK25S*-OL4 ......................121 DBM-9W4S-1A7N-A197.................75 DAMZ3C3PYK87......................56 DB25P-1AWN-K87.....................24 DBJKE25P*-1A0N ....................110 DBM-9W4S-NMB-77..................195 s DAMZ3C3SNA197.....................53 DB25P-F179A-K87.....................12 DBJKE25P*-1U0N....................108 DBM-9W4S-NMC-76..................195 e DAMZ3C3SYA197 .....................57 DB25PK87...........................32 DBJKE25P*-OL4.....................120 DBM-9W4S-OL2-A197..................77 R DAMZ3CK3PNK87TM ..................52 DB25S-0L2-A197......................11 DBJKE25P*-OL4-146..................120 DBM-9W4S-OL4-A197..................77 DAMZ3CK3PYK87TM...................56 DB25S-1A5N-A197 ....................27 DBJKE25S*-1A0N.....................111 DBM13W3P-NMB-77..................195 DAMZ3CK3SNA197TM..................53 DB25S-1A6N-A197 ....................27 DBJKE25S*-1U0N....................109 DBM13W3P1A0NNMBK52..............195 DAMZ3CK3SYA197TM..................57 DB25S-1A7N-A197 ....................23 DBJKE25S*-OL4 .....................121 DBM13W3P1A7NNMBK52..............195 s DAMZ3H3PNK87......................66 DB25S-1A8N-A197 ....................23 DBJKE25S*-OL4-146..................121 DBM13W3P1A9NNMBK52..............195 ’ DAMZ3H3PYK87......................70 DB25S-1A9N-A197 ....................23 DBJKX25P*-1A0N ....................110 DBM13W3PF179ANMBK52 .............195 r DAMZ3H3SNA197.....................67 DB25S-1ADN-A197....................25 DBJKX25P*-OL4.....................120 DBM13W3PK87.......................78 DAMZ3H3SYA197 .....................71 DB25S-1AFN-A197.....................23 DBJKX25P*-OL4-146..................120 DBM13W3PNM ......................188 e DAMZ3HK3PNK87TM ..................66 DB25S-1AJN-A197.....................25 DBJKX25S*-1A0N.....................111 DBM13W3PNMBK52..................195 d DAMZ3HK3PYK87TM ..................70 DB25S-1AON-A197 ....................21 DBJKX25S*-OL4 .....................121 DBM13W3POL3NMBK52...............195 DAMZ3HK3SNA197TM..................67 DB25S-1ATN-A197 ....................27 DBJKX25S*-OL4-146..................121 DBM13W3S-NMB-76..................195 a DAMZ3HK3SYA197TM..................71 DB25S-1AUN-A197....................27 DBJT25P...........................122 DBM13W3S1A0NNMBK52..............195 e DAMZ7C2PNK87......................52 DB25S-1AVN-A197 ....................25 DBJT25S*..........................123 DBM13W3S1A7NNMBK52..............195 DAMZ7C2PYK87......................56 DB25S-1AWN-A197....................25 DBJTE25P..........................122 DBM13W3S1A9NNMBK52..............195 R DAMZ7C2SNA197.....................53 DB25S-F179A-A197....................13 DBJTE25S*.........................123 DBM13W3SA197......................79 Dimensions are shown in mm (inch) 286 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DBM13W3SF179ANMBK52 .............195 DBM25SE ..........................137 DBMC21P1SVA197 ....................65 DBMG17C2SJA197 ....................45 DBM13W3SNM ......................189 DBM25SF...........................135 DBMC25PJK87 .......................16 DBMG17C2SVA197 ....................51 DBM13W3SNMBK52..................195 DBM25SF179........................139 DBMC25SJA197.......................17 DBMG17H2PJK87.....................60 DBM13W3SOL3NMBK52...............195 DBM25SF179A.......................139 DBMC5C5PJK87......................44 DBMG17H2SJA197 ....................61 DBM17W2P-NMC-77..................195 DBM25SF179ANMBK52................195 DBMC5C5PVK87......................50 DBMG17P2PVK87.....................64 DBM17W2P1A0NNMBK52..............195 DBM25SG..........................133 DBMC5C5SJA197.....................45 DBMG17P2SVA197....................65 DBM17W2P1A7NNMBK52..............195 DBM25SH..........................137 DBMC5C5SVA197.....................51 DBMG21C1PJK87 .....................44 DBM17W2P1A9NNMBK52..............195 DBM25SK ..........................135 DBMC5H5PJK87......................60 DBMG21C1PVK87.....................50 DBM17W2PF179ANMBK52 .............195 DBM25SL ..........................133 DBMC5H5SJA197 .....................61 DBMG21C1SJA197.....................45 DBM17W2PK87.......................78 DBM25SLNM........................175 DBMC5P5PVK87......................64 DBMG21C1SVA197.....................51 DBM17W2PNM ......................188 DBM25SM..........................137 DBMC5P5SVA197.....................65 DBMG21H1PJK87 .....................60 DBM17W2PNMB77 ...................195 DBM25SNM.........................181 DBMC9C4PJK87......................44 DBMG21H1SJA197.....................61 DBM17W2PNMBK52..................195 DBM25SNM*1A7N....................179 DBMC9C4PVK87......................50 DBMG21P1PVK87.....................64 DBM17W2POL3NMBK52...............195 DBM25SNM*1A9N....................179 DBMC9C4SJA197.....................45 DBMG21P1SVA197 ....................65 DBM17W2S1A0NNMBK52..............195 DBM25SNM*1AON....................177 DBMC9C4SVA197.....................51 DBMG25PJK87 .......................16 DBM17W2S1A7NNMBK52..............195 DBM25SNMBK52.....................195 DBMC9H4PJK87......................60 DBMG25SJA197 ......................17 DBM17W2S1A9NNMBK52..............195 DBM25SOL3NM......................173 DBMC9H4SJA197 .....................61 DBMG5C5PJK87......................44 DBM17W2SA197......................79 DBM25SOL3NMBK52 .................195 DBMC9P4PVK87......................64 DBMG5C5PVK87......................50 DBM17W2SF179ANMBK52 .............195 DBM25SP ..........................135 DBMC9P4SVA197.....................65 DBMG5C5SJA197.....................45 DBM17W2SNM ......................189 DBM25SR..........................135 DBMD13C3PJK87.....................44 DBMG5C5SVA197.....................51 DBM17W2SNMB77 ...................195 DBM25SS ..........................133 DBMD13C3PVK87.....................50 DBMG5H5PJK87......................60 DBM17W2SNMBK52..................195 DBM25SW..........................133 DBMD13C3SJA197 ....................45 DBMG5H5SJA197 .....................61 DBM17W2SOL3NMBK52...............195 DBM25SX ..........................137 DBMD13C3SVA197 ....................51 DBMG5P5PVK87......................64 DBM21W1P1A0NNMBK52 ..............195 DBM25SZ ..........................137 DBMD13H3PJK87.....................60 DBMG5P5SVA197.....................65 DBM21W1P1A7NNMBK52 ..............195 DBM5W5PNMB77....................195 DBMD13H3SJA197.....................61 DBMG9C4PJK87......................44 DBM21W1P1A9NNMBK52 ..............195 DBM5W5PNMBK52...................195 DBMD13P3PVK87.....................64 DBMG9C4PVK87......................50 DBM21W1PF179ANMBK52..............195 DBM5W5SA197.......................79 DBMD13P3SVA197....................65 DBMG9C4SJA197.....................45 DBM21W1PK87.......................78 DBM5W5SNM.......................189 DBMD17C2PJK87.....................44 DBMG9C4SVA197.....................51 DBM21W1PNM.......................188 DBM5W5SNMBK52...................195 DBMD17C2PVK87.....................50 DBMG9H4PJK87......................60 DBM21W1PNMBK52 ..................195 DBM9W4P1A0NNMBK52...............195 DBMD17C2SJA197 ....................45 DBMG9H4SJA197 .....................61 DBM21W1POL3NMBK52 ...............195 DBM9W4P1A7NNMBK52...............195 DBMD17C2SVA197 ....................51 DBMG9P4PVK87......................64 DBM21W1S1A0NNMBK52 ..............195 DBM9W4P1A9NNMBK52...............195 DBMD17H2PJK87.....................60 DBMG9P4SVA197.....................65 DBM21W1S1A7NNMBK52 ..............195 DBM9W4PF179ANMBK52 ..............195 DBMD17H2SJA197.....................61 DBMM13W3P........................166 DBM21W1S1A9NNMBK52 ..............195 DBM9W4PK87........................78 DBMD17P2PVK87.....................64 DBMM13W3S........................167 DBM21W1SA197......................79 DBM9W4PNM.......................188 DBMD17P2SVA197....................65 DBMM17W2P........................166 DBM21W1SF179ANMBK52..............195 DBM9W4PNMBK52...................195 DBMD21C1PJK87 .....................44 DBMM17W2S........................167 DBM21W1SNM.......................189 DBM9W4POL3NMBK52................195 DBMD21C1PVK87.....................50 DBMM21W1P........................166 DBM21W1SNMBK52 ..................195 DBM9W4S1A0NNMBK52...............195 DBMD21C1SJA197.....................45 DBMM21W1S........................167 DBM21W1SOL3NMBK52 ...............195 DBM9W4S1A7NNMBK52...............195 DBMD21C1SVA197.....................51 DBMM25P..........................140 DBM25P ...........................140 DBM9W4S1A9NNMBK52...............195 DBMD21H1PJK87 .....................60 DBMM25PA.........................132 DBM25P1A0NNMBK52.................195 DBM9W4SA197.......................79 DBMD21H1SJA197.....................61 DBMM25PB.........................136 DBM25P1A7NNMBK52.................195 DBM9W4SF179ANMBK52 ..............195 DBMD21P1PVK87 .....................64 DBMM25PC.........................134 DBM25P1A9NNMBK52.................195 DBM9W4SNM.......................189 DBMD21P1SVA197 ....................65 DBMM25PD.........................132 DBM25PA ..........................132 DBM9W4SNMBK52...................195 DBMD25PJK87 .......................16 DBMM25PE.........................136 DBM25PB ..........................136 DBM9W4SOL3NMBK52................195 DBMD25SJA197 ......................17 DBMM25PF.........................134 DBM25PC ..........................134 DBMA25PNM........................182 DBMD5C5PJK87......................44 DBMM25PF179 ......................138 DBM25PD..........................132 DBMA25PNMBK52 ...................195 DBMD5C5PVK87......................50 DBMM25PF179A.....................138 DBM25PE ..........................136 DBMA25SNM........................183 DBMD5C5SJA197.....................45 DBMM25PG.........................132 DBM25PF...........................134 DBMA25SNMBK52 ...................195 DBMD5C5SVA197.....................51 DBMM25PH.........................136 DBM25PF179........................138 DBMA44PNM........................184 DBMD5H5PJK87......................60 DBMM25PK.........................134 DBM25PF179A.......................138 DBMA44SNM........................185 DBMD5H5SJA197 .....................61 DBMM25PL.........................132 DBM25PF179ANMBK52................195 DBMAY25PNM.......................182 DBMD5P5PVK87......................64 DBMM25PM ........................136 DBM25PG..........................132 DBMAY25SNM.......................183 DBMD5P5SVA197.....................65 DBMM25PP.........................134 DBM25PH..........................136 DBMAY44PNM.......................184 DBMD9C4PJK87......................44 DBMM25PR.........................134 DBM25PK ..........................134 DBMAY44SNM.......................185 DBMD9C4PVK87......................50 DBMM25PS.........................132 DBM25PL ..........................132 DBMB-17W2S-NMB-76................195 DBMD9C4SJA197.....................45 DBMM25PW ........................132 DBM25PLNM........................174 DBMB-25S-NMB-76...................195 DBMD9C4SVA197.....................51 DBMM25PX.........................136 DBM25PM..........................136 DBMB-25S-NMB-77...................195 DBMD9H4PJK87......................60 DBMM25PZ.........................136 DBM25PNM.........................180 DBMB-25S-NMC-77...................195 DBMD9H4SJA197 .....................61 DBMM25S..........................141 R DBM25PNM*1A7N....................178 DBMB25SNMC76.....................195 DBMD9P4PVK87......................64 DBMM25SA.........................133 DBM25PNM*1A9N....................178 DBMC13C3PJK87.....................44 DBMD9P4SVA197.....................65 DBMM25SB.........................137 e DBM25PNM*1AON....................176 DBMC13C3PVK87.....................50 DBME13W3PK87......................78 DBMM25SC.........................135 a DBM25PNMB76......................195 DBMC13C3SJA197 ....................45 DBME13W3SA197.....................79 DBMM25SD.........................133 DBM25PNMB77......................195 DBMC13C3SVA197 ....................51 DBME17W2PK87......................78 DBMM25SE.........................137 d DBM25PNMBK52.....................195 DBMC13H3PJK87.....................60 DBME17W2SA197.....................79 DBMM25SF.........................135 e DBM25PNMC76......................195 DBMC13H3SJA197.....................61 DBME21W1PK87......................78 DBMM25SF179 ......................139 DBM25PNMC77......................195 DBMC13P3PVK87.....................64 DBME21W1SA197.....................79 DBMM25SF179A.....................139 r DBM25POL3NM......................172 DBMC13P3SVA197 ....................65 DBME25P ..........................140 DBMM25SG.........................133 ’ DBM25POL3NMBK52 .................195 DBMC17C2PJK87.....................44 DBME25S...........................141 DBMM25SH.........................137 s DBM25PP ..........................134 DBMC17C2PVK87.....................50 DBME5W5PK87.......................78 DBMM25SK.........................135 DBM25PR..........................134 DBMC17C2SJA197 ....................45 DBME5W5SA197......................79 DBMM25SL.........................133 DBM25PS ..........................132 DBMC17C2SVA197 ....................51 DBME9W4PK87.......................78 DBMM25SM ........................137 R DBM25PW..........................132 DBMC17H2PJK87.....................60 DBME9W4SA197......................79 DBMM25SP.........................135 DBM25PX ..........................136 DBMC17H2SJA197.....................61 DBMG13C3PJK87.....................44 DBMM25SR.........................135 e DBM25PZ...........................136 DBMC17P2PVK87.....................64 DBMG13C3PVK87.....................50 DBMM25SS.........................133 DBM25S............................141 DBMC17P2SVA197 ....................65 DBMG13C3SJA197 ....................45 DBMM25SW ........................133 s DBM25S1A0NNMBK52.................195 DBMC21C1PJK87 .....................44 DBMG13C3SVA197 ....................51 DBMM25SX.........................137 o DBM25S1A7NNMBK52.................195 DBMC21C1PVK87.....................50 DBMG13H3PJK87.....................60 DBMM25SZ.........................137 DBM25S1A9NNMBK52.................195 DBMC21C1SJA197.....................45 DBMG13H3SJA197 ....................61 DBMM5W5S ........................167 u DBM25SA ..........................133 DBMC21C1SVA197.....................51 DBMG13P3PVK87.....................64 DBMM9W4P ........................166 r DBM25SB ..........................137 DBMC21H1PJK87 .....................60 DBMG13P3SVA197....................65 DBMM9W4S ........................167 DBM25SC ..........................135 DBMC21H1SJA197.....................61 DBMG17C2PJK87.....................44 DBMMC13C3PJ......................146 c DBM25SD..........................133 DBMC21P1PVK87 .....................64 DBMG17C2PVK87.....................50 DBMMC13C3SJ......................147 e Dimensions are shown in mm (inch) Dimensions subject to change 287

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DBMMC13H3PJ......................154 DBMMN21C1SN......................151 DBMMZ13H3SN......................159 DBMP17P2PVK87.....................64 DBMMC13H3SJ......................155 DBMMN21H1PN......................158 DBMMZ13V3PN......................162 DBMP17P2SVA197 ....................65 DBMMC17C2PJ......................146 DBMMN21H1SN......................159 DBMMZ13V3SN......................163 DBMP21C1PJK87 .....................44 DBMMC17C2SJ......................147 DBMMN21V1PN......................162 DBMMZ17C2PN......................150 DBMP21C1PVK87 .....................50 DBMMC17H2PJ......................154 DBMMN21V1SN......................163 DBMMZ17C2SN......................151 DBMP21C1SJA197.....................45 DBMMC17H2SJ......................155 DBMMN5C5PN ......................150 DBMMZ17H2PN......................158 DBMP21C1SVA197.....................51 DBMMC21C1PJ......................146 DBMMN5C5SN.......................151 DBMMZ17H2SN......................159 DBMP21H1PJK87 .....................60 DBMMC21C1SJ......................147 DBMMN5H5PN ......................158 DBMMZ17V2PN......................162 DBMP21H1SJA197.....................61 DBMMC21H1PJ......................154 DBMMN5H5SN ......................159 DBMMZ17V2SN......................163 DBMP21P1PVK87 .....................64 DBMMC21H1SJ......................155 DBMMN5V5PN.......................162 DBMMZ21C1PN......................150 DBMP21P1SVA197.....................65 DBMMC5C5PJ.......................146 DBMMN5V5SN.......................163 DBMMZ21C1SN ......................151 DBMP25PJK87 .......................16 DBMMC5C5SJ.......................147 DBMMN9C4PN ......................150 DBMMZ21H1PN......................158 DBMP25SJA197.......................17 DBMMC5H5PJ.......................154 DBMMN9C4SN.......................151 DBMMZ21H1SN......................159 DBMP5C5PJK87......................44 DBMMC5H5SJ.......................155 DBMMN9H4PN ......................158 DBMMZ21V1PN......................162 DBMP5C5PVK87......................50 DBMMC9C4PJ.......................146 DBMMN9H4SN ......................159 DBMMZ21V1SN......................163 DBMP5C5SJA197 .....................45 DBMMC9C4SJ.......................147 DBMMN9V4PN.......................162 DBMMZ5C5PN.......................150 DBMP5C5SVA197 .....................51 DBMMC9H4PJ.......................154 DBMMN9V4SN.......................163 DBMMZ5C5SN.......................151 DBMP5H5PJK87......................60 DBMMC9H4SJ.......................155 DBMMP13C3PJ......................146 DBMMZ5H5PN.......................158 DBMP5H5SJA197 .....................61 DBMMD13C3PJ......................146 DBMMP13C3SJ......................147 DBMMZ5H5SN.......................159 DBMP5P5PVK87......................64 DBMMD13C3SJ......................147 DBMMP13H3PJ......................154 DBMMZ5V5PN.......................162 DBMP5P5SVA197.....................65 DBMMD13H3PJ......................154 DBMMP13H3SJ......................155 DBMMZ5V5SN.......................163 DBMP5W5PK87 ......................78 DBMMD13H3SJ......................155 DBMMP17C2PJ......................146 DBMMZ9C4PN.......................150 DBMP5W5PNM......................188 DBMMD17C2PJ......................146 DBMMP17C2SJ......................147 DBMMZ9C4SN.......................151 DBMP9C4PJK87......................44 DBMMD17C2SJ......................147 DBMMP17H2PJ......................154 DBMMZ9H4PN.......................158 DBMP9C4PVK87......................50 DBMMD17H2PJ......................154 DBMMP17H2SJ......................155 DBMMZ9H4SN.......................159 DBMP9C4SJA197 .....................45 DBMMD17H2SJ......................155 DBMMP21C1PJ ......................146 DBMMZ9V4PN.......................162 DBMP9C4SVA197 .....................51 DBMMD21C1PJ......................146 DBMMP21C1SJ ......................147 DBMMZ9V4SN.......................163 DBMP9H4PJK87......................60 DBMMD21C1SJ......................147 DBMMP21H1PJ ......................154 DBMN13C3PNK87.....................52 DBMP9H4SJA197 .....................61 DBMMD21H1PJ......................154 DBMMP21H1SJ......................155 DBMN13C3PYK87.....................56 DBMP9P4PVK87......................64 DBMMD21H1SJ......................155 DBMMP5C5PJ.......................146 DBMN13C3SNA197....................53 DBMP9P4SVA197.....................65 DBMMD5C5PJ.......................146 DBMMP5C5SJ.......................147 DBMN13C3SYA197....................57 DBMV13C3PNK87.....................52 DBMMD5C5SJ.......................147 DBMMP5H5PJ.......................154 DBMN13H3PNK87.....................66 DBMV13C3PYK87.....................56 DBMMD5H5PJ.......................154 DBMMP5H5SJ.......................155 DBMN13H3PYK87.....................70 DBMV13C3SNA197....................53 DBMMD5H5SJ.......................155 DBMMP5W5P .......................166 DBMN13H3SNA197....................67 DBMV13C3SYA197 ....................57 DBMMD9C4PJ.......................146 DBMMP9C4PJ.......................146 DBMN13H3SYA197 ....................71 DBMV13H3PNK87.....................66 DBMMD9C4SJ.......................147 DBMMP9C4SJ.......................147 DBMN17C2PNK87.....................52 DBMV13H3PYK87.....................70 DBMMD9H4PJ.......................154 DBMMP9H4PJ.......................154 DBMN17C2PYK87.....................56 DBMV13H3SNA197....................67 DBMMD9H4SJ.......................155 DBMMP9H4SJ.......................155 DBMN17C2SNA197....................53 DBMV13H3SYA197 ....................71 DBMME13W3P.......................166 DBMMV13C3PN......................150 DBMN17C2SYA197....................57 DBMV17C2PNK87.....................52 DBMME13W3S.......................167 DBMMV13C3SN......................151 DBMN17H2PNK87.....................66 DBMV17C2PYK87.....................56 DBMME17W2P.......................166 DBMMV13H3PN......................158 DBMN17H2PYK87.....................70 DBMV17C2SNA197....................53 DBMME17W2S.......................167 DBMMV13H3SN......................159 DBMN17H2SNA197....................67 DBMV17C2SYA197 ....................57 DBMME21W1P.......................166 DBMMV13V3PN......................162 DBMN17H2SYA197 ....................71 DBMV17H2PNK87.....................66 DBMME21W1S.......................167 DBMMV13V3SN......................163 DBMN21C1PNK87.....................52 DBMV17H2PYK87.....................70 DBMME25P.........................140 DBMMV17C2PN......................150 DBMN21C1PYK87.....................56 DBMV17H2SNA197....................67 DBMME25S.........................141 DBMMV17C2SN......................151 DBMN21C1SNA197 ....................53 DBMV17H2SYA197 ....................71 DBMME5W5P .......................166 DBMMV17H2PN......................158 DBMN21C1SYA197 ....................57 DBMV21C1PNK87.....................52 DBMME5W5S .......................167 DBMMV17H2SN......................159 DBMN21H1PNK87.....................66 DBMV21C1PYK87 .....................56 DBMME9W4P .......................166 DBMMV17V2PN......................162 DBMN21H1PYK87.....................70 DBMV21C1SNA197 ....................53 DBMME9W4S .......................167 DBMMV17V2SN......................163 DBMN21H1SNA197....................67 DBMV21C1SYA197.....................57 DBMMG13C3PJ......................146 DBMMV21C1PN......................150 DBMN21H1SYA197.....................71 DBMV21H1PNK87.....................66 DBMMG13C3SJ......................147 DBMMV21C1SN......................151 DBMN25PNK87........................6 DBMV21H1PYK87 .....................70 DBMMG13H3PJ......................154 DBMMV21H1PN......................158 DBMN25SNA197.......................7 DBMV21H1SNA197 ....................67 DBMMG13H3SJ......................155 DBMMV21H1SN......................159 DBMN5C5PNK87......................52 DBMV21H1SYA197.....................71 DBMMG17C2PJ......................146 DBMMV21V1PN......................162 DBMN5C5PYK87......................56 DBMV25PNK87........................6 DBMMG17C2SJ......................147 DBMMV21V1SN......................163 DBMN5C5SNA197.....................53 DBMV25SNA197.......................7 DBMMG17H2PJ......................154 DBMMV5C5PN.......................150 DBMN5C5SYA197.....................57 DBMV5C5PNK87......................52 DBMMG17H2SJ......................155 DBMMV5C5SN.......................151 DBMN5H5PNK87......................66 DBMV5C5PYK87......................56 e DBMMG21C1PJ......................146 DBMMV5H5PN.......................158 DBMN5H5PYK87......................70 DBMV5C5SNA197.....................53 c DBMMG21C1SJ......................147 DBMMV5H5SN.......................159 DBMN5H5SNA197.....................67 DBMV5C5SYA197.....................57 DBMMG21H1PJ......................154 DBMMV5V5PN.......................162 DBMN5H5SYA197.....................71 DBMV5H5PNK87......................66 r DBMMG21H1SJ......................155 DBMMV5V5SN.......................163 DBMN9C4PNK87......................52 DBMV5H5PYK87......................70 u DBMMG5C5PJ.......................146 DBMMV9C4PN.......................150 DBMN9C4PYK87......................56 DBMV5H5SNA197.....................67 DBMMG5C5SJ.......................147 DBMMV9C4SN.......................151 DBMN9C4SNA197.....................53 DBMV5H5SYA197 .....................71 o DBMMG5H5PJ.......................154 DBMMV9H4PN.......................158 DBMN9C4SYA197.....................57 DBMV9C4PNK87......................52 DBMMG5H5SJ.......................155 DBMMV9H4SN.......................159 DBMN9H4PNK87......................66 DBMV9C4PYK87......................56 s DBMMG9C4PJ.......................146 DBMMV9V4PN.......................162 DBMN9H4PYK87......................70 DBMV9C4SNA197.....................53 e DBMMG9C4SJ.......................147 DBMMV9V4SN.......................163 DBMN9H4SNA197.....................67 DBMV9C4SYA197.....................57 R DBMMG9H4PJ.......................154 DBMMY13W3P.......................166 DBMN9H4SYA197.....................71 DBMV9H4PNK87......................66 DBMMG9H4SJ.......................155 DBMMY13W3S.......................167 DBMP13C3PJK87 .....................44 DBMV9H4PYK87......................70 DBMMN13C3PN......................150 DBMMY17W2P.......................166 DBMP13C3PVK87.....................50 DBMV9H4SNA197.....................67 DBMMN13C3SN......................151 DBMMY17W2S.......................167 DBMP13C3SJA197 ....................45 DBMV9H4SYA197 .....................71 s DBMMN13H3PN......................158 DBMMY21W1P.......................166 DBMP13C3SVA197 ....................51 DBMY13W3PK87......................78 ’ DBMMN13H3SN......................159 DBMMY21W1S.......................167 DBMP13H3PJK87 .....................60 DBMY13W3PNM .....................188 r DBMMN13V3PN......................162 DBMMY25P.........................140 DBMP13H3SJA197.....................61 DBMY13W3SA197.....................79 DBMMN13V3SN......................163 DBMMY25S.........................141 DBMP13P3PVK87.....................64 DBMY13W3SNM .....................189 e DBMMN17C2PN......................150 DBMMY5W5P .......................166 DBMP13P3SVA197 ....................65 DBMY17W2PK87......................78 d DBMMN17C2SN......................151 DBMMY5W5S .......................167 DBMP17C2PJK87 .....................44 DBMY17W2PNM .....................188 DBMMN17H2PN......................158 DBMMY9W4P .......................166 DBMP17C2PVK87.....................50 DBMY17W2SA197.....................79 a DBMMN17H2SN......................159 DBMMY9W4S .......................167 DBMP17C2SJA197 ....................45 DBMY17W2SNM .....................189 e DBMMN17V2PN......................162 DBMMZ13C3PN......................150 DBMP17C2SVA197 ....................51 DBMY21W1PK87......................78 DBMMN17V2SN......................163 DBMMZ13C3SN......................151 DBMP17H2PJK87 .....................60 DBMY21W1PNM......................188 R DBMMN21C1PN......................150 DBMMZ13H3PN......................158 DBMP17H2SJA197.....................61 DBMY21W1SA197.....................79 Dimensions are shown in mm (inch) 288 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DBMY21W1SNM......................189 DC111808-1.........................216 DCJK37P*-1AWN.....................116 DCM-21WA4S-NMB-77................195 DBMY25P ..........................140 DC111808-5.........................216 DCJK37P*-1U0N.....................108 DCM-21WA4S-OL2-A197................77 DBMY25PNM........................180 DC115339-23 .......................205 DCJK37P*-1U7N .....................112 DCM-21WA4S-OL4-A197................77 DBMY25PNM*1AON...................176 DC115339-3 ........................207 DCJK37P*-1U7N-146..................112 DCM-25W36-NMB-77.................195 DBMY25POL3NM.....................172 DC115386-100A......................195 DCJK37P*-OL4......................120 DCM-25W3P-1A0N-K87 ................74 DBMY25S...........................141 DC115386-4B .......................207 DCJK37S*-1A0N......................111 DCM-25W3P-1A7N-K87 ................74 DBMY25SNM........................181 DC121073-152.......................200 DCJK37S*-1A5N .....................119 DCM-25W3P-NMB-77.................195 DBMY25SNM*1AON...................177 DC121073-52 .......................200 DCJK37S*-1A6N .....................119 DCM-25W3P-OL2-K87 .................76 DBMY25SOL3NM.....................173 DC19678-138....................193, 195 DCJK37S*-1A7N .....................115 DCM-25W3P-OL4-K87 .................76 DBMY5W5PK87.......................78 DC19678-162........................195 DCJK37S*-1A8N .....................115 DCM-25W3S-1A0N-A197................75 DBMY5W5PNM......................188 DC19678-173........................195 DCJK37S*-1A9N .....................115 DCM-25W3S-1A7N-A197................75 DBMY5W5SA197......................79 DC19678-3.........................204 DCJK37S*-1ADN.....................117 DCM-25W3S-NMC-76.................195 DBMY5W5SNM......................189 DC19977-3.........................204 DCJK37S*-1AFN .....................115 DCM-25W3S-NMC-77.................195 DBMY9W4PK87.......................78 DC19977-45.....................193, 195 DCJK37S*-1AGN.....................117 DCM-25W3S-OL2-A197.................77 DBMY9W4PNM......................188 DC20963...........................203 DCJK37S*-1AHN.....................115 DCM-25W3S-OL4-A197.................77 DBMY9W4SA197......................79 DC20963-17 ........................192 DCJK37S*-1AJN......................117 DCM-27W2P-1A0N-K87 ................74 DBMY9W4SNM......................189 DC22070...........................215 DCJK37S*-1APN .....................119 DCM-27W2P-1A7N-K87 ................74 DBMZ13C3PNK87.....................52 DC22071...........................214 DCJK37S*-1ATN .....................119 DCM-27W2P-OL2-K87 .................76 DBMZ13C3PYK87 .....................56 DC24660...........................203 DCJK37S*-1AUN.....................119 DCM-27W2P-OL4-K87 .................76 DBMZ13C3SNA197 ....................53 DC24660-16.....................192, 195 DCJK37S*-1AVN .....................117 DCM-27W2S-1A0N-A197................75 DBMZ13C3SYA197 ....................57 DC37P-0L2-K87 ......................10 DCJK37S*-1AWN.....................117 DCM-27W2S-1A7N-A197................75 DBMZ13H3PNK87.....................66 DC37P-1A5N-K87.....................26 DCJK37S*-1U0N.....................109 DCM-27W2S-NMC-76.................195 DBMZ13H3PYK87 .....................70 DC37P-1A6N-K87.....................26 DCJK37S*-1U7N .....................113 DCM-27W2S-OL2-A197.................77 DBMZ13H3SNA197 ....................67 DC37P-1A7N-K87.....................22 DCJK37S*-1U7N-146..................113 DCM-27W2S-OL4-A197.................77 DBMZ13H3SYA197.....................71 DC37P-1A8N-K87.....................22 DCJK37S*-OL4 ......................121 DCM-37P-NMC-77....................195 DBMZ17C2PNK87.....................52 DC37P-1A9N-K87.....................22 DCJKE37P*-1A0N ....................110 DCM-37S-NMB-76....................195 DBMZ17C2PYK87 .....................56 DC37P-1ADN-K87.....................24 DCJKE37P*-1U0N....................108 DCM-37S-NMC-76....................195 DBMZ17C2SNA197 ....................53 DC37P-1AFN-K87 .....................22 DCJKE37P*-OL4.....................120 DCM-37S-NMC-77....................195 DBMZ17C2SYA197 ....................57 DC37P-1AJN-K87 .....................24 DCJKE37P*-OL4-146..................120 DCM-8W8P-1A0N-K87 .................74 DBMZ17H2PNK87.....................66 DC37P-1AON-K87.....................20 DCJKE37S*-1A0N.....................111 DCM-8W8P-1A7N-K87 .................74 DBMZ17H2PYK87 .....................70 DC37P-1ATN-K87.....................26 DCJKE37S*-1U0N....................109 DCM-8W8P-NMB-77..................195 DBMZ17H2SNA197 ....................67 DC37P-1AUN-K87.....................26 DCJKE37S*-OL4 .....................121 DCM-8W8P-NMC-77..................195 DBMZ17H2SYA197.....................71 DC37P-1AVN-K87.....................24 DCJKE37S*-OL4-146..................121 DCM-8W8P-OL2-K87 ..................76 DBMZ21C1PNK87 .....................52 DC37P-1AWN-K87.....................24 DCJKX37P*-1A0N ....................110 DCM-8W8P-OL4-K87 ..................76 DBMZ21C1PYK87 .....................56 DC37P-F179A-K87.....................12 DCJKX37P*-OL4.....................120 DCM-8W8S-1A0N-A197.................75 DBMZ21C1SNA197.....................53 DC37PK87...........................32 DCJKX37P*-OL4-146..................120 DCM-8W8S-1A7N-A197.................75 DBMZ21C1SYA197.....................57 DC37S-0L2-A197......................11 DCJKX37S*-1A0N.....................111 DCM-8W8S-MNC-76..................195 DBMZ21H1PNK87 .....................66 DC37S-1A5N-A197 ....................27 DCJKX37S*-OL4 .....................121 DCM-8W8S-NMB-77..................195 DBMZ21H1PYK87 .....................70 DC37S-1A6N-A197 ....................27 DCJKX37S*-OL4-146..................121 DCM-8W8S-NMC-77..................195 DBMZ21H1SNA197 ....................67 DC37S-1A7N-A197 ....................23 DCJT37P...........................122 DCM-8W8S-OL2-A197..................77 DBMZ21H1SYA197.....................71 DC37S-1A8N-A197 ....................23 DCJT37S*..........................123 DCM-8W8S-OL4-A197..................77 DBMZ25PNK87........................6 DC37S-1A9N-A197 ....................23 DCJTE37P..........................122 DCM13W6P1A0NNMBK52..............195 DBMZ25SNA197 .......................7 DC37S-1ADN-A197....................25 DCJTE37S*.........................123 DCM13W6P1A7NNMBK52..............195 DBMZ5C5PNK87......................52 DC37S-1AFN-A197 ....................23 DCJTX37P..........................122 DCM13W6P1A9NNMBK52..............195 DBMZ5C5PYK87......................56 DC37S-1AJN-A197 ....................25 DCJTX37S*.........................123 DCM13W6PF179ANMBK52 .............195 DBMZ5C5SNA197.....................53 DC37S-1AON-A197 ....................21 DCM-13W6P-1A0N-K87.................74 DCM13W6PK87.......................78 DBMZ5C5SYA197 .....................57 DC37S-1ATN-A197 ....................27 DCM-13W6P-1A7N-K87.................74 DCM13W6PNM ......................188 DBMZ5H5PNK87......................66 DC37S-1AUN-A197....................27 DCM-13W6P-NMB-76 .................195 DCM13W6PNMBK52..................195 DBMZ5H5PYK87......................70 DC37S-1AVN-A197 ....................25 DCM-13W6P-NMB-77 .................195 DCM13W6POL3NMBK52...............195 DBMZ5H5SNA197.....................67 DC37S-1AWN-A197....................25 DCM-13W6P-NMC-76.................195 DCM13W6S1A0NNMBK52..............195 DBMZ5H5SYA197 .....................71 DC37S-F179A-A197....................13 DCM-13W6P-NMC-77.................195 DCM13W6S1A7NNMBK52..............195 DBMZ9C4PNK87......................52 DC37SA197..........................33 DCM-13W6P-OL2-K87..................76 DCM13W6S1A9NNMBK52..............195 DBMZ9C4PYK87......................56 DC50907-1 .........................218 DCM-13W6P-OL4-K87..................76 DCM13W6SA197......................79 DBMZ9C4SNA197.....................53 DC51214...........................206 DCM-13W6S-1A0N-A197................75 DCM13W6SF179ANMBK52 .............195 DBMZ9C4SYA197 .....................57 DC51215...........................206 DCM-13W6S-1A7N-A197................75 DCM13W6SNM ......................189 DBMZ9H4PNK87......................66 DC51222-1..........................210 DCM-13W6S-NMB-77 .................195 DCM13W6SNMBK52..................195 DBMZ9H4PYK87......................70 DC53750-3 .........................218 DCM-13W6S-NMC-77.................195 DCM13W6SNMC76...................195 DBMZ9H4SNA197.....................67 DCA21WA4PK87F0....................80 DCM-13W6S-OL2-A197.................77 DCM13W6SOL3NMBK52...............195 DBMZ9H4SYA197 .....................71 DCA21WA4SA197F0 ...................81 DCM-13W6S-OL4-A197.................77 DCM17W5P1A0NNMBK52..............195 R DBNG25P-P1..........................4 DCA25W3PK87F0.....................80 DCM-17W5P-1A0N-K87.................74 DCM17W5P1A7NNMBK52..............195 DBNG25S-P1..........................5 DCA37PK87FO .......................36 DCM-17W5P-1A7N-K87.................74 DCM17W5P1A9NNMBK52..............195 e DBNGE25P-P1.........................4 DCA37SA197FO.......................37 DCM-17W5P-NMB-76 .................195 DCM17W5PF179ANMBK52 .............195 a DBNGE25S-P1.........................5 DCA8W8PK87F0......................80 DCM-17W5P-NMC-76.................195 DCM17W5PK87.......................78 DBNGL25P-P1.........................4 DCA8W8SA197F0 .....................81 DCM-17W5P-NMC-77.................195 DCM17W5PNM ......................188 d DBNGL25S-P1.........................5 DCE37P-0L2-K87-146..................10 DCM-17W5P-OL2-K87..................76 DCM17W5PNMB77 ...................195 e DBNGX25P-P1.........................4 DCE37PK87..........................32 DCM-17W5P-OL4-K87..................76 DCM17W5PNMBK52..................195 DBNGX25S-P1.........................5 DCE37S-0L2-A197-146 .................11 DCM-17W5S-1A0N-A197................75 DCM17W5POL3NMBK52...............195 r DBNGZ25P-P1.........................4 DCE37SA197.........................33 DCM-17W5S-1A7N-A197................75 DCM17W5S-NMB-76..................195 ’ DBNGZ25S-P1.........................5 DCJK37P*-1A0N .....................110 DCM-17W5S-NMB-77 .................195 DCM17W5S1A0NNMBK52..............195 s DBW25P*...........................38 DCJK37P*-1A5N .....................118 DCM-17W5S-NMC-76.................195 DCM17W5S1A7NNMBK52..............195 DBW25P*G..........................38 DCJK37P*-1A6N .....................118 DCM-17W5S-NMC-77.................195 DCM17W5S1A9NNMBK52..............195 DBW25S*...........................39 DCJK37P*-1A7N .....................114 DCM-17W5S-OL2-A197.................77 DCM17W5SA197......................79 R DBW25S*G..........................39 DCJK37P*-1A8N .....................114 DCM-17W5S-OL4-A197.................77 DCM17W5SF179ANMBK52 .............195 DBWE25P*..........................38 DCJK37P*-1A9N .....................114 DCM-21W4P-NMB-77 .................195 DCM17W5SNM ......................189 e DBWE25P*G.........................38 DCJK37P*-1ADN.....................116 DCM-21W4S-NMB-77 .................195 DCM17W5SNMBK52..................195 DBWE25S*..........................39 DCJK37P*-1AFN......................114 DCM-21WA4P-1A0N-K87................74 DCM17W5SOL3NMBK52...............195 s DBWE25S*G.........................39 DCJK37P*-1AGN.....................116 DCM-21WA4P-1A7N-K87................74 DCM21W4S-NMC-76..................195 o DBX25P-0L2-K87-146..................10 DCJK37P*-1AHN.....................114 DCM-21WA4P-NMB-77................195 DCM21WA4P-NMB-76.................195 DBX25PK87..........................32 DCJK37P*-1AJN......................116 DCM-21WA4P-NMC-76................195 DCM21WA4P1A0NNMBK52.............195 u DBX25S-0L2-A197-146 .................11 DCJK37P*-1APN .....................118 DCM-21WA4P-OL2-K87 ................76 DCM21WA4P1A7NNMBK52.............195 r DBX25SA197.........................33 DCJK37P*-1ATN .....................118 DCM-21WA4P-OL4-K87 ................76 DCM21WA4P1A9NNMBK52.............195 DC-59-20.......................195, 218 DCJK37P*-1AUN.....................118 DCM-21WA4S-1A0N-A197...............75 DCM21WA4PF179ANMBK52 ............195 c DC-60-20.......................195, 218 DCJK37P*-1AVN .....................116 DCM-21WA4S-1A7N-A197...............75 DCM21WA4PK87......................78 e Dimensions are shown in mm (inch) Dimensions subject to change 289

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DCM21WA4PNM.....................188 DCM37S1A7NNMBK52 ................195 DCMC25C3SVA197....................51 DCME37P ..........................140 DCM21WA4PNMBK52.................195 DCM37S1A9NNMBK52 ................195 DCMC25H3PJK87.....................60 DCME37S...........................141 DCM21WA4POL3NMBK52..............195 DCM37SA..........................133 DCMC25H3SJA197 ....................61 DCME8W8PK87 ......................78 DCM21WA4S-NMB-76.................195 DCM37SB ..........................137 DCMC25P3PVK87.....................64 DCME8W8SA197......................79 DCM21WA4S1A0NNMBK52.............195 DCM37SC..........................135 DCMC25P3SVA197....................65 DCMG13C6PJK87.....................44 DCM21WA4S1A7NNMBK52.............195 DCM37SD..........................133 DCMC27C2PJK87.....................44 DCMG13C6PVK87.....................50 DCM21WA4S1A9NNMBK52.............195 DCM37SE ..........................137 DCMC27C2PVK87.....................50 DCMG13C6SJA197 ....................45 DCM21WA4SA197.....................79 DCM37SF ..........................135 DCMC27C2SJA197....................45 DCMG13C6SVA197 ....................51 DCM21WA4SF179ANMBK52 ............195 DCM37SF179........................139 DCMC27C2SVA197....................51 DCMG13H6PJK87.....................60 DCM21WA4SNM.....................189 DCM37SF179A.......................139 DCMC27H2PJK87.....................60 DCMG13H6SJA197 ....................61 DCM21WA4SNMBK52.................195 DCM37SF179ANMBK52................195 DCMC27H2SJA197 ....................61 DCMG13P6PVK87.....................64 DCM21WA4SOL3NMBK52..............195 DCM37SG..........................133 DCMC27P2PVK87.....................64 DCMG13P6SVA197....................65 DCM25W3P-NMB-76..................195 DCM37SH..........................137 DCMC27P2SVA197....................65 DCMG17C5PJK87.....................44 DCM25W3P1A0NNMBK52..............195 DCM37SK ..........................135 DCMC37PJK87 .......................16 DCMG17C5PVK87.....................50 DCM25W3P1A7NNMBK52..............195 DCM37SL ..........................133 DCMC37SJA197 ......................17 DCMG17C5SJA197 ....................45 DCM25W3P1A9NNMBK52..............195 DCM37SLNM........................175 DCMC8C8PJK87......................44 DCMG17C5SVA197 ....................51 DCM25W3PF179ANMBK52.............195 DCM37SM..........................137 DCMC8C8PVK87......................50 DCMG17H5PJK87.....................60 DCM25W3PK87 ......................78 DCM37SNM.........................181 DCMC8C8SJA197.....................45 DCMG17H5SJA197 ....................61 DCM25W3PNM......................188 DCM37SNM*1A7N....................179 DCMC8C8SVA197.....................51 DCMG17P5PVK87.....................64 DCM25W3PNMBK52..................195 DCM37SNM*1A9N....................179 DCMC8H8PJK87......................60 DCMG17P5SVA197....................65 DCM25W3POL3NMBK52...............195 DCM37SNM*1AON ...................177 DCMC8H8SJA197 .....................61 DCMG21CA4PJK87....................44 DCM25W3S1A0NNMBK52..............195 DCM37SNMB77......................195 DCMC8P8PVK87......................64 DCMG21CA4PVK87....................50 DCM25W3S1A7NNMBK52..............195 DCM37SNMBK52.....................195 DCMC8P8SVA197.....................65 DCMG21CA4SJA197...................45 DCM25W3S1A9NNMBK52..............195 DCM37SOL3NM......................173 DCMD13C6PJK87.....................44 DCMG21CA4SVA197...................51 DCM25W3SA197......................79 DCM37SOL3NMBK52 .................195 DCMD13C6PVK87.....................50 DCMG21HA4PJK87....................60 DCM25W3SF179ANMBK52.............195 DCM37SP ..........................135 DCMD13C6SJA197 ....................45 DCMG21HA4SJA197 ...................61 DCM25W3SNM......................189 DCM37SR..........................135 DCMD13C6SVA197 ....................51 DCMG21PA4PVK87....................64 DCM25W3SNMBK52..................195 DCM37SS ..........................133 DCMD13H6PJK87.....................60 DCMG21PA4SVA197...................65 DCM25W3SOL3NMBK52...............195 DCM37SW..........................133 DCMD13H6SJA197 ....................61 DCMG25C3PJK87.....................44 DCM27W2OL3NMBK52................195 DCM37SX ..........................137 DCMD13P6PVK87.....................64 DCMG25C3PVK87.....................50 DCM27W2P-NMC-76..................195 DCM37SZ ..........................137 DCMD13P6SVA197....................65 DCMG25C3SJA197....................45 DCM27W2P1A0NNMBK52..............195 DCM50PC..........................134 DCMD17C5PJK87.....................44 DCMG25C3SVA197....................51 DCM27W2P1A7NNMBK52..............195 DCM8W8PK87 .......................78 DCMD17C5PVK87.....................50 DCMG25H3PJK87.....................60 DCM27W2P1A9NNMBK52..............195 DCM8W8PNM.......................188 DCMD17C5SJA197 ....................45 DCMG25H3SJA197 ....................61 DCM27W2PF179ANMBK52.............195 DCM8W8PNMB76....................195 DCMD17C5SVA197 ....................51 DCMG25P3PVK87.....................64 DCM27W2PK87 ......................78 DCM8W8PNMBK52...................195 DCMD17H5PJK87.....................60 DCMG25P3SVA197....................65 DCM27W2PNM......................188 DCM8W8PNMC76....................195 DCMD17H5SJA197 ....................61 DCMG27C2PJK87.....................44 DCM27W2PNMBK52..................195 DCM8W8SA197.......................79 DCMD17P5PVK87.....................64 DCMG27C2PVK87.....................50 DCM27W2POL3NMBK52...............195 DCM8W8SNM.......................189 DCMD17P5SVA197....................65 DCMG27C2SJA197....................45 DCM27W2S1A0NNMBK52..............195 DCM8W8SNMB76....................195 DCMD21CA4PJK87....................44 DCMG27C2SVA197....................51 DCM27W2S1A7NNMBK52..............195 DCM8W8SNMBK52...................195 DCMD21CA4PVK87....................50 DCMG27H2PJK87.....................60 DCM27W2S1A9NNMBK52..............195 DCMA37PNM........................182 DCMD21CA4SJA197...................45 DCMG27H2SJA197 ....................61 DCM27W2SA197......................79 DCMA37PNMBK52 ...................195 DCMD21CA4SVA197...................51 DCMG27P2PVK87.....................64 DCM27W2SF179ANMBK52.............195 DCMA37SNM........................183 DCMD21HA4PJK87....................60 DCMG27P2SVA197....................65 DCM27W2SNM......................189 DCMA37SNMBK52 ...................195 DCMD21HA4SJA197 ...................61 DCMG37PJK87 .......................16 DCM27W2SNMBK52..................195 DCMA62PNM........................184 DCMD21PA4PVK87....................64 DCMG37SJA197 ......................17 DCM37P ...........................140 DCMA62SNM........................185 DCMD21PA4SVA197...................65 DCMG8C8PJK87......................44 DCM37P1A0NNMBK52 ................195 DCMAY37PNM.......................182 DCMD25C3PJK87.....................44 DCMG8C8PVK87......................50 DCM37P1A7NNMBK52 ................195 DCMAY37SNM.......................183 DCMD25C3PVK87.....................50 DCMG8C8SJA197.....................45 DCM37P1A9NNMBK52 ................195 DCMAY62PNM.......................184 DCMD25C3SJA197....................45 DCMG8C8SVA197.....................51 DCM37PA ..........................132 DCMAY62SNM.......................185 DCMD25C3SVA197....................51 DCMG8H8PJK87......................60 DCM37PB ..........................136 DCMB-17W5S-NMB-76................195 DCMD25H3PJK87.....................60 DCMG8H8SJA197 .....................61 DCM37PC..........................134 DCMB-37S-NMB-77...................195 DCMD25H3SJA197 ....................61 DCMG8P8PVK87......................64 DCM37PD..........................132 DCMB-37S-NMC-77...................195 DCMD25P3PVK87.....................64 DCMG8P8SVA197.....................65 DCM37PE ..........................136 DCMB37S-NMB-76...................195 DCMD25P3SVA197....................65 DCMM13W6P .......................166 DCM37PF ..........................134 DCMB37S-NMC-76...................195 DCMD27C2PJK87.....................44 DCMM13W6S .......................167 DCM37PF179........................138 DCMC13C6PJK87.....................44 DCMD27C2PVK87.....................50 DCMM17W5P .......................166 DCM37PF179A.......................138 DCMC13C6PVK87.....................50 DCMD27C2SJA197....................45 DCMM17W5S .......................167 e DCM37PF179ANMBK52................195 DCMC13C6SJA197 ....................45 DCMD27C2SVA197....................51 DCMM21WA4P ......................166 c DCM37PG..........................132 DCMC13C6SVA197 ....................51 DCMD27H2PJK87.....................60 DCMM21WA4S ......................167 DCM37PH..........................136 DCMC13H6PJK87.....................60 DCMD27H2SJA197 ....................61 DCMM24W7S .......................167 r DCM37PK ..........................134 DCMC13H6SJA197 ....................61 DCMD27P2PVK87.....................64 DCMM25W3P .......................166 u DCM37PL ..........................132 DCMC13P6PVK87.....................64 DCMD27P2SVA197....................65 DCMM25W3S .......................167 DCM37PLNM........................174 DCMC13P6SVA197....................65 DCMD37PJK87 .......................16 DCMM27W2P .......................166 o DCM37PM..........................136 DCMC17C5PJK87.....................44 DCMD37SJA197 ......................17 DCMM27W2S .......................167 DCM37PNM.........................180 DCMC17C5PVK87.....................50 DCMD8C8PJK87......................44 DCMM36W4S .......................167 s DCM37PNM*1A7N....................178 DCMC17C5SJA197 ....................45 DCMD8C8PVK87......................50 DCMM37P..........................140 e DCM37PNM*1A9N....................178 DCMC17C5SVA197 ....................51 DCMD8C8SJA197.....................45 DCMM37PA.........................132 R DCM37PNM*1AON ...................176 DCMC17H5PJK87.....................60 DCMD8C8SVA197.....................51 DCMM37PB.........................136 DCM37PNMB76......................195 DCMC17H5SJA197 ....................61 DCMD8H8PJK87......................60 DCMM37PC.........................134 DCM37PNMB77......................195 DCMC17P5PVK87.....................64 DCMD8H8SJA197 .....................61 DCMM37PD.........................132 DCM37PNMBK52.....................195 DCMC17P5SVA197....................65 DCMD8P8PVK87......................64 DCMM37PE.........................136 s DCM37PNMC76......................195 DCMC21CA4PJK87....................44 DCMD8P8SVA197.....................65 DCMM37PF.........................134 ’ DCM37POL3NM......................172 DCMC21CA4PVK87....................50 DCME13W6PK87......................78 DCMM37PF179......................138 r DCM37POL3NMBK52 .................195 DCMC21CA4SJA197 ...................45 DCME13W6SA197.....................79 DCMM37PF179A.....................138 DCM37PP ..........................134 DCMC21CA4SVA197...................51 DCME17W5PK87......................78 DCMM37PG.........................132 e DCM37PR..........................134 DCMC21HA4PJK87....................60 DCME17W5SA197.....................79 DCMM37PH.........................136 d DCM37PS ..........................132 DCMC21HA4SJA197 ...................61 DCME21WA4PK87.....................78 DCMM37PK.........................134 DCM37PW..........................132 DCMC21PA4PVK87....................64 DCME21WA4SA197....................79 DCMM37PL.........................132 a DCM37PX ..........................136 DCMC21PA4SVA197...................65 DCME25W3PK87......................78 DCMM37PM ........................136 e DCM37PZ ..........................136 DCMC25C3PJK87.....................44 DCME25W3SA197.....................79 DCMM37PP.........................134 DCM37S............................141 DCMC25C3PVK87.....................50 DCME27W2PK87......................78 DCMM37PR.........................134 R DCM37S1A0NNMBK52 ................195 DCMC25C3SJA197....................45 DCME27W2SA197.....................79 DCMM37PS.........................132 Dimensions are shown in mm (inch) 290 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DCMM37PW ........................132 DCMME25W3S ......................167 DCMMP25C3SJ......................147 DCMMZ25C3PN......................150 DCMM37PX.........................136 DCMME27W2P ......................166 DCMMP25H3PJ......................154 DCMMZ25C3SN......................151 DCMM37PZ.........................136 DCMME27W2S ......................167 DCMMP25H3SJ......................155 DCMMZ25H3PN......................158 DCMM37S..........................141 DCMME36W4S ......................167 DCMMP27C2PJ......................146 DCMMZ25H3SN......................159 DCMM37SA.........................133 DCMME37P.........................140 DCMMP27C2SJ......................147 DCMMZ25V3PN......................162 DCMM37SB.........................137 DCMME37S.........................141 DCMMP27H2PJ......................154 DCMMZ25V3SN......................163 DCMM37SC.........................135 DCMME43W2S ......................167 DCMMP27H2SJ......................155 DCMMZ27C2PN......................150 DCMM37SD.........................133 DCMME47W1S ......................167 DCMMP8C8PJ.......................146 DCMMZ27C2SN......................151 DCMM37SE.........................137 DCMME8W8P .......................166 DCMMP8C8SJ.......................147 DCMMZ27H2PN......................158 DCMM37SF.........................135 DCMME8W8S .......................167 DCMMP8H8PJ.......................154 DCMMZ27H2SN......................159 DCMM37SF179......................139 DCMMG13C6PJ......................146 DCMMP8H8SJ.......................155 DCMMZ27V2PN......................162 DCMM37SF179A.....................139 DCMMG13C6SJ......................147 DCMMV13C6PN......................150 DCMMZ27V2SN......................163 DCMM37SG.........................133 DCMMG13H6PJ......................154 DCMMV13C6SN......................151 DCMMZ8C8PN.......................150 DCMM37SH.........................137 DCMMG13H6SJ......................155 DCMMV13H6PN......................158 DCMMZ8C8SN.......................151 DCMM37SK.........................135 DCMMG17C5PJ......................146 DCMMV13H6SN......................159 DCMMZ8H8PN.......................158 DCMM37SL.........................133 DCMMG17C5SJ......................147 DCMMV13V6PN......................162 DCMMZ8H8SN.......................159 DCMM37SM ........................137 DCMMG17H5PJ......................154 DCMMV13V6SN......................163 DCMMZ8V8PN.......................162 DCMM37SP.........................135 DCMMG17H5SJ......................155 DCMMV17C5PN......................150 DCMMZ8V8SN.......................163 DCMM37SR.........................135 DCMMG21CA4PJ.....................146 DCMMV17C5SN......................151 DCMN13C6PNK87.....................52 DCMM37SS.........................133 DCMMG21CA4SJ.....................147 DCMMV17H5PN......................158 DCMN13C6PYK87.....................56 DCMM37SW ........................133 DCMMG21HA4PJ.....................154 DCMMV17H5SN......................159 DCMN13C6SNA197....................53 DCMM37SX.........................137 DCMMG21HA4SJ.....................155 DCMMV17V5PN......................162 DCMN13C6SYA197....................57 DCMM37SZ.........................137 DCMMG25C3PJ......................146 DCMMV17V5SN......................163 DCMN13H6PNK87.....................66 DCMM43W2S .......................167 DCMMG25C3SJ......................147 DCMMV21CA4PN.....................150 DCMN13H6PYK87.....................70 DCMM47W1S .......................167 DCMMG25H3PJ......................154 DCMMV21CA4SN.....................151 DCMN13H6SNA197....................67 DCMM8W8P ........................166 DCMMG25H3SJ......................155 DCMMV21HA4PN.....................158 DCMN13H6SYA197 ....................71 DCMM8W8S ........................167 DCMMG27C2PJ......................146 DCMMV21HA4SN.....................159 DCMN17C5PNK87.....................52 DCMMC13C6PJ......................146 DCMMG27C2SJ......................147 DCMMV21VA4PN.....................162 DCMN17C5PYK87.....................56 DCMMC13C6SJ......................147 DCMMG27H2PJ......................154 DCMMV21VA4SN.....................163 DCMN17C5SNA197....................53 DCMMC13H6PJ......................154 DCMMG27H2SJ......................155 DCMMV25C3PN......................150 DCMN17C5SYA197....................57 DCMMC13H6SJ......................155 DCMMG8C8PJ.......................146 DCMMV25C3SN......................151 DCMN17H5PNK87.....................66 DCMMC17C5PJ......................146 DCMMG8C8SJ.......................147 DCMMV25H3PN .....................158 DCMN17H5PYK87.....................70 DCMMC17C5SJ......................147 DCMMG8H8PJ.......................154 DCMMV25H3SN .....................159 DCMN17H5SNA197....................67 DCMMC17H5PJ......................154 DCMMG8H8SJ.......................155 DCMMV25V3PN......................162 DCMN17H5SYA197 ....................71 DCMMC17H5SJ......................155 DCMMN13C6PN......................150 DCMMV25V3SN......................163 DCMN21CA4PNK87....................52 DCMMC21CA4PJ.....................146 DCMMN13C6SN......................151 DCMMV27C2PN......................150 DCMN21CA4PYK87....................56 DCMMC21CA4SJ.....................147 DCMMN13H6PN......................158 DCMMV27C2SN......................151 DCMN21CA4SNA197...................53 DCMMC21HA4PJ.....................154 DCMMN13H6SN......................159 DCMMV27H2PN .....................158 DCMN21CA4SYA197...................57 DCMMC21HA4SJ.....................155 DCMMN13V6PN......................162 DCMMV27H2SN .....................159 DCMN21HA4PNK87....................66 DCMMC25C3PJ......................146 DCMMN13V6SN......................163 DCMMV27V2PN......................162 DCMN21HA4PYK87....................70 DCMMC25C3SJ......................147 DCMMN17C5PN......................150 DCMMV27V2SN......................163 DCMN21HA4SNA197...................67 DCMMC25H3PJ......................154 DCMMN17C5SN......................151 DCMMV8C8PN.......................150 DCMN21HA4SYA197...................71 DCMMC25H3SJ......................155 DCMMN17H5PN......................158 DCMMV8C8SN.......................151 DCMN25C3PNK87.....................52 DCMMC27C2PJ......................146 DCMMN17H5SN......................159 DCMMV8H8PN ......................158 DCMN25C3PYK87.....................56 DCMMC27C2SJ......................147 DCMMN17V5PN......................162 DCMMV8H8SN ......................159 DCMN25C3SNA197....................53 DCMMC27H2PJ......................154 DCMMN17V5SN......................163 DCMMV8V8PN.......................162 DCMN25C3SYA197....................57 DCMMC27H2SJ......................155 DCMMN21CA4PN.....................150 DCMMV8V8SN.......................163 DCMN25H3PNK87.....................66 DCMMC8C8PJ.......................146 DCMMN21CA4SN.....................151 DCMMY13W6P ......................166 DCMN25H3PYK87.....................70 DCMMC8C8SJ.......................147 DCMMN21HA4PN ....................158 DCMMY13W6S ......................167 DCMN25H3SNA197....................67 DCMMC8H8PJ.......................154 DCMMN21HA4SN ....................159 DCMMY17W5P ......................166 DCMN25H3SYA197....................71 DCMMC8H8SJ.......................155 DCMMN21VA4PN.....................162 DCMMY17W5S ......................167 DCMN27C2PNK87.....................52 DCMMD13C6PJ......................146 DCMMN21VA4SN.....................163 DCMMY21WA4P .....................166 DCMN27C2PYK87.....................56 DCMMD13C6SJ......................147 DCMMN25C3PN .....................150 DCMMY21WA4S .....................167 DCMN27C2SNA197....................53 DCMMD13H6PJ......................154 DCMMN25C3SN......................151 DCMMY24W7S ......................167 DCMN27C2SYA197....................57 DCMMD13H6SJ......................155 DCMMN25H3PN .....................158 DCMMY25W3P ......................166 DCMN27H2PNK87.....................66 DCMMD17C5PJ......................146 DCMMN25H3SN .....................159 DCMMY25W3S ......................167 DCMN27H2PYK87.....................70 DCMMD17C5SJ......................147 DCMMN25V3PN .....................162 DCMMY27W2P ......................166 DCMN27H2SNA197....................67 DCMMD17H5PJ......................154 DCMMN25V3SN .....................163 DCMMY27W2S ......................167 DCMN27H2SYA197....................71 DCMMD17H5SJ......................155 DCMMN27C2PN .....................150 DCMMY36W4S ......................167 DCMN37PNK87........................6 R DCMMD21CA4PJ.....................146 DCMMN27C2SN......................151 DCMMY37P.........................140 DCMN37SNA197.......................7 DCMMD21CA4SJ.....................147 DCMMN27H2PN .....................158 DCMMY37S.........................141 DCMN8C8PNK87......................52 e DCMMD21HA4PJ.....................154 DCMMN27H2SN .....................159 DCMMY43W2S ......................167 DCMN8C8PYK87......................56 a DCMMD21HA4SJ.....................155 DCMMN27V2PN .....................162 DCMMY47W1S ......................167 DCMN8C8SNA197.....................53 DCMMD25C3PJ......................146 DCMMN27V2SN .....................163 DCMMY8W8P .......................166 DCMN8C8SYA197.....................57 d DCMMD25C3SJ......................147 DCMMN8C8PN ......................150 DCMMY8W8S .......................167 DCMN8H8PNK87......................66 e DCMMD25H3PJ......................154 DCMMN8C8SN.......................151 DCMMZ13C6PN......................150 DCMN8H8PYK87......................70 DCMMD25H3SJ......................155 DCMMN8H8PN ......................158 DCMMZ13C6SN......................151 DCMN8H8SNA197.....................67 r DCMMD27C2PJ......................146 DCMMN8H8SN ......................159 DCMMZ13H6PN......................158 DCMN8H8SYA197.....................71 ’ DCMMD27C2SJ......................147 DCMMN8V8PN ......................162 DCMMZ13H6SN......................159 DCMP13C6PJK87 .....................44 s DCMMD27H2PJ......................154 DCMMN8V8SN ......................163 DCMMZ13V6PN......................162 DCMP13C6PVK87.....................50 DCMMD27H2SJ......................155 DCMMP13C6PJ......................146 DCMMZ13V6SN......................163 DCMP13C6SJA197 ....................45 DCMMD8C8PJ.......................146 DCMMP13C6SJ......................147 DCMMZ17C5PN......................150 DCMP13C6SVA197 ....................51 R DCMMD8C8SJ.......................147 DCMMP13H6PJ......................154 DCMMZ17C5SN......................151 DCMP13H6PJK87.....................60 DCMMD8H8PJ.......................154 DCMMP13H6SJ......................155 DCMMZ17H5PN......................158 DCMP13H6SJA197.....................61 e DCMMD8H8SJ.......................155 DCMMP17C5PJ......................146 DCMMZ17H5SN......................159 DCMP13P6PVK87.....................64 DCMME13W6P.......................166 DCMMP17C5SJ......................147 DCMMZ17V5PN......................162 DCMP13P6SVA197 ....................65 s DCMME13W6S ......................167 DCMMP17H5PJ......................154 DCMMZ17V5SN......................163 DCMP17C5PJK87 .....................44 o DCMME17W5P.......................166 DCMMP17H5SJ......................155 DCMMZ21CA4PN.....................150 DCMP17C5PVK87.....................50 DCMME17W5S ......................167 DCMMP21CA4PJ.....................146 DCMMZ21CA4SN.....................151 DCMP17C5SJA197 ....................45 u DCMME21WA4P .....................166 DCMMP21CA4SJ.....................147 DCMMZ21HA4PN.....................158 DCMP17C5SVA197 ....................51 r DCMME21WA4S .....................167 DCMMP21HA4PJ.....................154 DCMMZ21HA4SN.....................159 DCMP17H5PJK87.....................60 DCMME24W7S ......................167 DCMMP21HA4SJ.....................155 DCMMZ21VA4PN.....................162 DCMP17H5SJA197.....................61 c DCMME25W3P ......................166 DCMMP25C3PJ......................146 DCMMZ21VA4SN.....................163 DCMP17P5PVK87.....................64 e Dimensions are shown in mm (inch) Dimensions subject to change 291

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DCMP17P5SVA197 ....................65 DCMV8H8SNA197.....................67 DCMZ8H8SYA197 .....................71 DDE50P-0L2-K87-146..................10 DCMP21CA4PJK87....................44 DCMV8H8SYA197.....................71 DCNG37P-P1..........................4 DDE50PK87..........................32 DCMP21CA4PVK87....................50 DCMY13W6PK87......................78 DCNG37S-P1..........................5 DDE50S-0L2-A197-146 .................11 DCMP21CA4SJA197 ...................45 DCMY13W6PNM .....................188 DCNGE37P-P1.........................4 DDE50SA197.........................33 DCMP21CA4SVA197 ...................51 DCMY13W6SA197.....................79 DCNGE37S-P1.........................5 DDJK50P*-OL4......................120 DCMP21HA4PJK87....................60 DCMY13W6SNM .....................189 DCNGL37P-P1.........................4 DDJKE50P*-OL4.....................120 DCMP21HA4SJA197 ...................61 DCMY17W5PK87......................78 DCNGL37S-P1.........................5 DDJKE50P*-OL4-146..................120 DCMP21PA4PVK87....................64 DCMY17W5PNM .....................188 DCNGX37P-P1.........................4 DDJKX50P*-OL4.....................120 DCMP21PA4SVA197...................65 DCMY17W5SA197.....................79 DCNGX37S-P1.........................5 DDJKX50P*-OL4-146..................120 DCMP25C3PJK87.....................44 DCMY17W5SNM .....................189 DCNGZ37P-P1.........................4 DDM-24W7P-1A0N-K87 ................74 DCMP25C3PVK87.....................50 DCMY21WA4PK87.....................78 DCNGZ37S-P1.........................5 DDM-24W7P-1A7N-K87 ................74 DCMP25C3SJA197....................45 DCMY21WA4PNM....................188 DCW37P*...........................38 DDM-24W7P-NMB-77.................195 DCMP25C3SVA197....................51 DCMY21WA4SA197....................79 DCW37P*G..........................38 DDM-24W7P-NMC-76.................195 DCMP25H3PJK87.....................60 DCMY21WA4SNM....................189 DCW37S*...........................39 DDM-24W7P-OL2-K87 .................76 DCMP25H3SJA197 ....................61 DCMY25W3PK87 .....................78 DCW37S*G..........................39 DDM-24W7P-OL4-K87 .................76 DCMP25P3PVK87.....................64 DCMY25W3PNM.....................188 DCWE37P*..........................38 DDM-24W7S-1A0N-A197................75 DCMP25P3SVA197....................65 DCMY25W3SA197.....................79 DCWE37P*G.........................38 DDM-24W7S-1A7N-A197................75 DCMP27C2PJK87.....................44 DCMY25W3SNM.....................189 DCWE37S*..........................39 DDM-24W7S-NMB-76.................195 DCMP27C2PVK87.....................50 DCMY27W2PK87 .....................78 DCWE37S*G.........................39 DDM-24W7S-NMC-76.................195 DCMP27C2SJA197....................45 DCMY27W2PNM.....................188 DCX37P-0L2-K87-146..................10 DDM-24W7S-OL2-A197.................77 DCMP27C2SVA197....................51 DCMY27W2SA197.....................79 DCX37PK87..........................32 DDM-24W7S-OL4-A197.................77 DCMP27H2PJK87.....................60 DCMY27W2SNM.....................189 DCX37S-0L2-A197-146 .................11 DDM-36W4P-1A0N-K87 ................74 DCMP27H2SJA197 ....................61 DCMY37P ..........................140 DCX37SA197.........................33 DDM-36W4P-1A7N-K87 ................74 DCMP27P2PVK87.....................64 DCMY37PNM........................180 DD-59-20.......................195, 218 DDM-36W4P-NMB-77.................195 DCMP27P2SVA197....................65 DCMY37PNM*1AON ..................176 DD-60-20.......................195, 218 DDM-36W4P-OL2-K87 .................76 DCMP37PJK87 .......................16 DCMY37POL3NM.....................172 DD115339-24 .......................205 DDM-36W4P-OL4-K87 .................76 DCMP37SJA197.......................17 DCMY37S...........................141 DD115339-4 ........................207 DDM-36W4S-1A0N-A197................75 DCMP8C8PJK87......................44 DCMY37SNM........................181 DD115386-103A......................195 DDM-36W4S-1A7N-A197................75 DCMP8C8PVK87......................50 DCMY37SNM*1AON ..................177 DD121073-153.......................200 DDM-36W4S-NMB-77.................195 DCMP8C8SJA197.....................45 DCMY37SOL3NM.....................173 DD121073-53 .......................200 DDM-36W4S-NMC-76.................195 DCMP8C8SVA197.....................51 DCMY8W8PK87 ......................78 DD19678-161....................193, 195 DDM-36W4S-OL2-A197.................77 DCMP8H8PJK87......................60 DCMY8W8PNM......................188 DD19678-172........................195 DDM-36W4S-OL4-A197.................77 DCMP8H8SJA197 .....................61 DCMY8W8SA197......................79 DD19678-176........................195 DDM-43W2P-1A0N-K87 ................74 DCMP8P8PVK87......................64 DCMY8W8SNM......................189 DD19678-4.........................204 DDM-43W2P-1A7N-K87 ................74 DCMP8P8SVA197.....................65 DCMZ13C6PNK87.....................52 DD19977-4.........................204 DDM-43W2P-OL2-K87 .................76 DCMV13C6PNK87.....................52 DCMZ13C6PYK87 .....................56 DD19977-44.....................193, 195 DDM-43W2P-OL4-K87 .................76 DCMV13C6PYK87.....................56 DCMZ13C6SNA197 ....................53 DD20964...........................203 DDM-43W2S-1A0N-A197................75 DCMV13C6SNA197....................53 DCMZ13C6SYA197 ....................57 DD20964-19 ........................192 DDM-43W2S-1A7N-A197................75 DCMV13C6SYA197 ....................57 DCMZ13H6PNK87.....................66 DD21961...........................214 DDM-43W2S-NMB-77.................195 DCMV13H6PNK87.....................66 DCMZ13H6PYK87.....................70 DD21962...........................215 DDM-43W2S-NMC-76.................195 DCMV13H6PYK87.....................70 DCMZ13H6SNA197....................67 DD24661...........................203 DDM-43W2S-OL2-A197.................77 DCMV13H6SNA197....................67 DCMZ13H6SYA197.....................71 DD24661-13.....................192, 195 DDM-43W2S-OL4-A197.................77 DCMV13H6SYA197 ....................71 DCMZ17C5PNK87.....................52 DD50908-1 .........................218 DDM-47W1P-1A0N-K87.................74 DCMV17C5PNK87.....................52 DCMZ17C5PYK87 .....................56 DD50P-0L2-K87 ......................10 DDM-47W1P-1A7N-K87.................74 DCMV17C5PYK87.....................56 DCMZ17C5SNA197 ....................53 DD50P-1A5N-K87.....................26 DDM-47W1P-OL2-K87..................76 DCMV17C5SNA197....................53 DCMZ17C5SYA197 ....................57 DD50P-1A6N-K87.....................26 DDM-47W1P-OL4-K87..................76 DCMV17C5SYA197 ....................57 DCMZ17H5PNK87.....................66 DD50P-1A7N-K87.....................22 DDM-47W1S-1A0N-A197................75 DCMV17H5PNK87.....................66 DCMZ17H5PYK87.....................70 DD50P-1A8N-K87.....................22 DDM-47W1S-1A7N-A197................75 DCMV17H5PYK87.....................70 DCMZ17H5SNA197....................67 DD50P-1A9N-K87.....................22 DDM-47W1S-NMC-76.................195 DCMV17H5SNA197....................67 DCMZ17H5SYA197.....................71 DD50P-1ADN-K87.....................24 DDM-47W1S-OL2-A197.................77 DCMV17H5SYA197 ....................71 DCMZ21CA4PNK87....................52 DD50P-1AFN-K87 .....................22 DDM-47W1S-OL4-A197.................77 DCMV21CA4PNK87....................52 DCMZ21CA4PYK87....................56 DD50P-1AJN-K87 .....................24 DDM-50P-NMC-77....................195 DCMV21CA4PYK87....................56 DCMZ21CA4SNA197...................53 DD50P-1AON-K87.....................20 DDM-50S-NMC-76....................195 DCMV21CA4SNA197...................53 DCMZ21CA4SYA197 ...................57 DD50P-1ATN-K87.....................26 DDM-50S-NMC-77....................195 DCMV21CA4SYA197...................57 DCMZ21HA4PNK87....................66 DD50P-1AUN-K87.....................26 DDM24W7P1A0NNMBK52..............195 DCMV21HA4PNK87....................66 DCMZ21HA4PYK87....................70 DD50P-1AVN-K87.....................24 DDM24W7P1A7NNMBK52..............195 DCMV21HA4PYK87....................70 DCMZ21HA4SNA197...................67 DD50P-1AWN-K87.....................24 DDM24W7P1A9NNMBK52..............195 DCMV21HA4SNA197...................67 DCMZ21HA4SYA197 ...................71 DD50P-F179A-K87.....................12 DDM24W7PF179ANMBK52.............195 e DCMV21HA4SYA197 ...................71 DCMZ25C3PNK87.....................52 DD50PK87 ..........................32 DDM24W7PK87 ......................78 c DCMV25C3PNK87.....................52 DCMZ25C3PYK87.....................56 DD50S-0L2-A197......................11 DDM24W7PNM......................188 DCMV25C3PYK87.....................56 DCMZ25C3SNA197....................53 DD50S-1A5N-A197 ....................27 DDM24W7PNMB76...................195 r DCMV25C3SNA197....................53 DCMZ25C3SYA197....................57 DD50S-1A6N-A197 ....................27 DDM24W7PNMBK52..................195 u DCMV25C3SYA197....................57 DCMZ25H3PNK87.....................66 DD50S-1A7N-A197 ....................23 DDM24W7POL3NMBK52...............195 DCMV25H3PNK87.....................66 DCMZ25H3PYK87.....................70 DD50S-1A8N-A197 ....................23 DDM24W7S1A0NNMBK52..............195 o DCMV25H3PYK87.....................70 DCMZ25H3SNA197....................67 DD50S-1A9N-A197 ....................23 DDM24W7S1A7NNMBK52..............195 DCMV25H3SNA197....................67 DCMZ25H3SYA197 ....................71 DD50S-1ADN-A197....................25 DDM24W7S1A9NNMBK52..............195 s DCMV25H3SYA197....................71 DCMZ27C2PNK87.....................52 DD50S-1AFN-A197 ....................23 DDM24W7SA197......................79 e DCMV27C2PNK87.....................52 DCMZ27C2PYK87.....................56 DD50S-1AJN-A197 ....................25 DDM24W7SF179ANMBK52.............195 R DCMV27C2PYK87.....................56 DCMZ27C2SNA197....................53 DD50S-1AON-A197 ....................21 DDM24W7SNM......................189 DCMV27C2SNA197....................53 DCMZ27C2SYA197....................57 DD50S-1ATN-A197 ....................27 DDM24W7SNMB77...................195 DCMV27C2SYA197....................57 DCMZ27H2PNK87.....................66 DD50S-1AUN-A197....................27 DDM24W7SNMBK52..................195 DCMV27H2PNK87.....................66 DCMZ27H2PYK87.....................70 DD50S-1AVN-A197 ....................25 DDM24W7SOL3NMBK52...............195 s DCMV27H2PYK87.....................70 DCMZ27H2SNA197....................67 DD50S-1AWN-A197....................25 DDM36W4P1A0NNMBK52..............195 ’ DCMV27H2SNA197....................67 DCMZ27H2SYA197 ....................71 DD50S-F179A-A197....................13 DDM36W4P1A7NNMBK52..............195 r DCMV27H2SYA197....................71 DCMZ37PNK87........................6 DD50SA197..........................33 DDM36W4P1A9NNMBK52..............195 DCMV37PNK87........................6 DCMZ37SNA197.......................7 DD51216...........................206 DDM36W4PF179ANMBK52.............195 e DCMV37SNA197.......................7 DCMZ8C8PNK87......................52 DD51217...........................206 DDM36W4PK87 ......................78 d DCMV8C8PNK87......................52 DCMZ8C8PYK87......................56 DD51223-1..........................210 DDM36W4PNM......................188 DCMV8C8PYK87......................56 DCMZ8C8SNA197.....................53 DD53750-4.........................218 DDM36W4PNMBK52..................195 a DCMV8C8SNA197.....................53 DCMZ8C8SYA197.....................57 DDA24W7PK87F0.....................80 DDM36W4POL3NMBK52...............195 e DCMV8C8SYA197.....................57 DCMZ8H8PNK87......................66 DDA24W7SA197F0 ....................81 DDM36W4S1A0NNMBK52..............195 DCMV8H8PNK87......................66 DCMZ8H8PYK87......................70 DDA36W4PK87F0.....................80 DDM36W4S1A7NNMBK52..............195 R DCMV8H8PYK87......................70 DCMZ8H8SNA197.....................67 DDA36W4SA197F0 ....................81 DDM36W4S1A9NNMBK52..............195 Dimensions are shown in mm (inch) 292 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DDM36W4SA197......................79 DDM50SF ..........................135 DDME47W1SA197.....................79 DDMMD24H7PJ......................156 DDM36W4SF179ANMBK52.............195 DDM50SF179........................139 DDME50P ..........................140 DDMMD24H7SJ......................157 DDM36W4SNM......................189 DDM50SF179A.......................139 DDME50S...........................141 DDMMD36C4PJ......................148 DDM36W4SNMB76...................195 DDM50SF179ANMBK52................195 DDMG24C7PJK87.....................46 DDMMD36C4SJ......................149 DDM36W4SNMBK52..................195 DDM50SG..........................133 DDMG24C7SJA197....................47 DDMMD36H4PJ......................156 DDM36W4SOL3NMBK52...............195 DDM50SH..........................137 DDMG24H7PJK87.....................62 DDMMD36H4SJ......................157 DDM43W2P-NMB-77..................195 DDM50SK..........................135 DDMG24H7SJA197....................63 DDMMD43C2PJ......................148 DDM43W2P1A0NNMBK52..............195 DDM50SL ..........................133 DDMG36C4PJK87.....................46 DDMMD43C2SJ......................149 DDM43W2P1A7NNMBK52..............195 DDM50SLNM........................175 DDMG36C4SJA197....................47 DDMMD43H2PJ......................156 DDM43W2P1A9NNMBK52..............195 DDM50SM..........................137 DDMG36H4PJK87.....................62 DDMMD43H2SJ......................157 DDM43W2PF179ANMBK52.............195 DDM50SNM.........................181 DDMG36H4SJA197....................63 DDMMD47C1PJ......................148 DDM43W2PK87 ......................78 DDM50SNM*1A7N....................179 DDMG43C2PJK87.....................46 DDMMD47C1SJ......................149 DDM43W2PNM......................188 DDM50SNM*1A9N....................179 DDMG43C2SJA197....................47 DDMMD47H1PJ......................156 DDM43W2PNMBK52..................195 DDM50SNM*1AON ...................177 DDMG43H2PJK87.....................62 DDMMD47H1SJ......................157 DDM43W2POL3NMBK52...............195 DDM50SNMB76......................195 DDMG43H2SJA197....................63 DDMME24W7P ......................166 DDM43W2S1A0NNMBK52..............195 DDM50SNMB77......................195 DDMG47C1PJK87.....................46 DDMME36W4P ......................166 DDM43W2S1A7NNMBK52..............195 DDM50SNMBK52 ....................195 DDMG47C1SJA197 ....................47 DDMME43W2P ......................166 DDM43W2S1A9NNMBK52..............195 DDM50SOL3NM......................173 DDMG47H1PJK87.....................62 DDMME47W1P ......................166 DDM43W2SA197......................79 DDM50SOL3NMBK52 .................195 DDMG47H1SJA197....................63 DDMME50P.........................140 DDM43W2SF179ANMBK52.............195 DDM50SP ..........................135 DDMG50PJK87.......................16 DDMME50S.........................141 DDM43W2SNM......................189 DDM50SR..........................135 DDMG50SJA197 ......................17 DDMMG24C7PJ......................148 DDM43W2SNMBK52..................195 DDM50SS..........................133 DDMM24W7P .......................166 DDMMG24C7SJ......................149 DDM43W2SOL3NMBK52...............195 DDM50SW..........................133 DDMM36W4P .......................166 DDMMG24H7PJ......................156 DDM47W1P-NMC-76..................195 DDM50SX ..........................137 DDMM43W2P .......................166 DDMMG24H7SJ......................157 DDM47W1P1A0NNMBK52..............195 DDM50SZ ..........................137 DDMM47W1P .......................166 DDMMG36C4PJ......................148 DDM47W1P1A7NNMBK52..............195 DDMA50PNM........................182 DDMM50P..........................140 DDMMG36C4SJ......................149 DDM47W1P1A9NNMBK52..............195 DDMA50PNMBK52 ...................195 DDMM50PA.........................132 DDMMG36H4PJ......................156 DDM47W1PF179ANMBK52 .............195 DDMA50SNM........................183 DDMM50PB.........................136 DDMMG36H4SJ......................157 DDM47W1PK87.......................78 DDMA50SNMBK52 ...................195 DDMM50PC.........................134 DDMMG43C2PJ......................148 DDM47W1PNM ......................188 DDMA78PNM........................184 DDMM50PD.........................132 DDMMG43C2SJ......................149 DDM47W1PNMBK52..................195 DDMA78SNM........................185 DDMM50PE.........................136 DDMMG43H2PJ......................156 DDM47W1POL3NMBK52...............195 DDMAY50PNM.......................182 DDMM50PF.........................134 DDMMG43H2SJ......................157 DDM47W1S1A0NNMBK52..............195 DDMAY50SNM.......................183 DDMM50PF179......................138 DDMMG47C1PJ......................148 DDM47W1S1A7NNMBK52..............195 DDMAY78PNM.......................184 DDMM50PF179A.....................138 DDMMG47C1SJ......................149 DDM47W1S1A9NNMBK52..............195 DDMAY78SNM.......................185 DDMM50PG.........................132 DDMMG47H1PJ......................156 DDM47W1SA197......................79 DDMB-247S-NMB-76..................195 DDMM50PH.........................136 DDMMG47H1SJ......................157 DDM47W1SF179ANMBK52 .............195 DDMB-50S-NMB-77...................195 DDMM50PK.........................134 DDMMN24C7PN .....................152 DDM47W1SNM ......................189 DDMB-50S-NMC-77 ..................195 DDMM50PL.........................132 DDMMN24C7SN .....................153 DDM47W1SNMBK52..................195 DDMB50S-NMB-76...................195 DDMM50PM ........................136 DDMMN24H7PN .....................160 DDM47W1SOL3NMBK52...............195 DDMB50S-NMC-76...................195 DDMM50PP.........................134 DDMMN24H7SN......................161 DDM50P ...........................140 DDMC24C7PJK87.....................46 DDMM50PR.........................134 DDMMN24V7PN .....................164 DDM50P1A0NNMBK52 ................195 DDMC24C7SJA197....................47 DDMM50PS.........................132 DDMMN24V7SN .....................165 DDM50P1A7NNMBK52 ................195 DDMC24H7PJK87.....................62 DDMM50PW ........................132 DDMMN36C4PN .....................152 DDM50P1A9NNMBK52 ................195 DDMC24H7SJA197....................63 DDMM50PX.........................136 DDMMN36C4SN .....................153 DDM50PA..........................132 DDMC36C4PJK87.....................46 DDMM50PZ.........................136 DDMMN36H4PN .....................160 DDM50PB..........................136 DDMC36C4SJA197....................47 DDMM50S..........................141 DDMMN36H4SN......................161 DDM50PD..........................132 DDMC36H4PJK87.....................62 DDMM50SA.........................133 DDMMN36V4PN .....................164 DDM50PE ..........................136 DDMC36H4SJA197....................63 DDMM50SB.........................137 DDMMN36V4SN .....................165 DDM50PF ..........................134 DDMC43C2PJK87.....................46 DDMM50SC.........................135 DDMMN43C2PN .....................152 DDM50PF179........................138 DDMC43C2SJA197....................47 DDMM50SD.........................133 DDMMN43C2SN .....................153 DDM50PF179A.......................138 DDMC43H2PJK87.....................62 DDMM50SE.........................137 DDMMN43H2PN .....................160 DDM50PF179ANMBK52................195 DDMC43H2SJA197....................63 DDMM50SF.........................135 DDMMN43H2SN......................161 DDM50PG..........................132 DDMC47C1PJK87.....................46 DDMM50SF179......................139 DDMMN43V2PN .....................164 DDM50PH..........................136 DDMC47C1SJA197 ....................47 DDMM50SF179A.....................139 DDMMN43V2SN .....................165 DDM50PK..........................134 DDMC47H1PJK87.....................62 DDMM50SG.........................133 DDMMN47C1PN......................152 DDM50PL ..........................132 DDMC47H1SJA197 ....................63 DDMM50SH.........................137 DDMMN47C1SN......................153 DDM50PLNM........................174 DDMC50PJK87 .......................16 DDMM50SK.........................135 DDMMN47H1PN......................160 DDM50PM..........................136 DDMC50SJA197 ......................17 DDMM50SL.........................133 DDMMN47H1SN......................161 DDM50PNM.........................180 DDMD24C7PJK87.....................46 DDMM50SM ........................137 DDMMN47V1PN......................164 R DDM50PNM*1A7N....................178 DDMD24C7SJA197....................47 DDMM50SP.........................135 DDMMN47V1SN......................165 DDM50PNM*1A9N....................178 DDMD24H7PJK87.....................62 DDMM50SR.........................135 DDMMP24C7PJ......................148 e DDM50PNM*1AON ...................176 DDMD24H7SJA197....................63 DDMM50SS.........................133 DDMMP24C7SJ......................149 a DDM50PNMB76......................195 DDMD36C4PJK87.....................46 DDMM50SW ........................133 DDMMP24H7PJ......................156 DDM50PNMB77......................195 DDMD36C4SJA197....................47 DDMM50SX.........................137 DDMMP24H7SJ......................157 d DDM50PNMBK52.....................195 DDMD36H4PJK87.....................62 DDMM50SZ.........................137 DDMMP36C4PJ......................148 e DDM50PNMC76......................195 DDMD36H4SJA197....................63 DDMMC24C7PJ......................148 DDMMP36C4SJ......................149 DDM50POL3NM......................172 DDMD43C2PJK87.....................46 DDMMC24C7SJ......................149 DDMMP36H4PJ......................156 r DDM50POL3NMBK52 .................195 DDMD43C2SJA197....................47 DDMMC24H7PJ......................156 DDMMP36H4SJ......................157 ’ DDM50PP ..........................134 DDMD43H2PJK87.....................62 DDMMC24H7SJ......................157 DDMMP43C2PJ......................148 s DDM50PR..........................134 DDMD43H2SJA197....................63 DDMMC36C4PJ......................148 DDMMP43C2SJ......................149 DDM50PS ..........................132 DDMD47C1PJK87.....................46 DDMMC36C4SJ......................149 DDMMP43H2PJ......................156 DDM50PW..........................132 DDMD47C1SJA197 ....................47 DDMMC36H4PJ......................156 DDMMP43H2SJ......................157 R DDM50PX ..........................136 DDMD47H1PJK87.....................62 DDMMC36H4SJ......................157 DDMMP47C1PJ......................148 DDM50PZ ..........................136 DDMD47H1SJA197....................63 DDMMC43C2PJ......................148 DDMMP47C1SJ......................149 e DDM50S ...........................141 DDMD50PJK87.......................16 DDMMC43C2SJ......................149 DDMMP47H1PJ......................156 DDM50S1A0NNMBK52 ................195 DDMD50SJA197 ......................17 DDMMC43H2PJ......................156 DDMMP47H1SJ......................157 s DDM50S1A7NNMBK52 ................195 DDME24W7PK87 .....................78 DDMMC43H2SJ......................157 DDMMV24C7PN .....................152 o DDM50S1A9NNMBK52 ................195 DDME24W7SA197.....................79 DDMMC47C1PJ......................148 DDMMV24C7SN .....................153 DDM50SA..........................133 DDME36W4PK87 .....................78 DDMMC47C1SJ......................149 DDMMV24H7PN .....................160 u DDM50SB..........................137 DDME36W4SA197.....................79 DDMMC47H1PJ......................156 DDMMV24H7SN......................161 r DDM50SC..........................135 DDME43W2PK87 .....................78 DDMMC47H1SJ......................157 DDMMV24V7PN......................164 DDM50SD..........................133 DDME43W2SA197.....................79 DDMMD24C7PJ......................148 DDMMV24V7SN......................165 c DDM50SE ..........................137 DDME47W1PK87......................78 DDMMD24C7SJ......................149 DDMMV36C4PN .....................152 e Dimensions are shown in mm (inch) Dimensions subject to change 293

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DDMMV36C4SN .....................153 DDMP24H7PJK87.....................62 DDMZ36C4PYK87.....................58 DE9S-1A7N-A197 .....................23 DDMMV36H4PN .....................160 DDMP24H7SJA197....................63 DDMZ36C4SNA197....................55 DE9S-1A8N-A197 .....................23 DDMMV36H4SN......................161 DDMP36C4PJK87.....................46 DDMZ36C4SYA197....................59 DE9S-1A9N-A197 .....................23 DDMMV36V4PN......................164 DDMP36C4SJA197....................47 DDMZ36H4PNK87.....................68 DE9S-1ADN-A197 .....................25 DDMMV36V4SN......................165 DDMP36H4PJK87.....................62 DDMZ36H4PYK87.....................72 DE9S-1AFN-A197......................23 DDMMV43C2PN .....................152 DDMP36H4SJA197....................63 DDMZ36H4SNA197....................69 DE9S-1AJN-A197......................25 DDMMV43C2SN .....................153 DDMP43C2PJK87.....................46 DDMZ36H4SYA197....................73 DE9S-1AON-A197......................21 DDMMV43H2PN .....................160 DDMP43C2SJA197....................47 DDMZ43C2PNK87.....................54 DE9S-1ATN-A197......................27 DDMMV43H2SN......................161 DDMP43H2PJK87.....................62 DDMZ43C2PYK87.....................58 DE9S-1AUN-A197 .....................27 DDMMV43V2PN......................164 DDMP43H2SJA197....................63 DDMZ43C2SNA197....................55 DE9S-1AVN-A197 .....................25 DDMMV43V2SN......................165 DDMP47C1PJK87.....................46 DDMZ43C2SYA197....................59 DE9S-1AWN-A197.....................25 DDMMV47C1PN......................152 DDMP47C1SJA197 ....................47 DDMZ43H2PNK87.....................68 DE9S-F179A-A197.....................13 DDMMV47C1SN......................153 DDMP47H1PJK87.....................62 DDMZ43H2PYK87.....................72 DE9SA197...........................33 DDMMV47H1PN......................160 DDMP47H1SJA197 ....................63 DDMZ43H2SNA197....................69 DEA9PK87FO.........................36 DDMMV47H1SN......................161 DDMP50PJK87 .......................16 DDMZ43H2SYA197....................73 DEA9SA197FO........................37 DDMMV47V1PN......................164 DDMP50SJA197 ......................17 DDMZ47C1PNK87.....................54 DEBS-9............................205 DDMMV47V1SN......................165 DDMV24C7PNK87.....................54 DDMZ47C1PYK87.....................58 DEBU111515.........................216 DDMMY24W7P ......................166 DDMV24C7PYK87.....................58 DDMZ47C1SNA197....................55 DEE9P-0L2-K87-146...................10 DDMMY36W4P ......................166 DDMV24C7SNA197....................55 DDMZ47C1SYA197 ....................59 DEE9PK87...........................32 DDMMY43W2P ......................166 DDMV24C7SYA197....................59 DDMZ47H1PNK87.....................68 DEE9S-0L2-A197-146...................11 DDMMY47W1P ......................166 DDMV24H7PNK87.....................68 DDMZ47H1PYK87.....................72 DEE9SA197..........................33 DDMMY50P.........................140 DDMV24H7PYK87.....................72 DDMZ47H1SNA197....................69 DEJK9P*-1A0N.......................110 DDMMY50S.........................141 DDMV24H7SNA197....................69 DDMZ47H1SYA197 ....................73 DEJK9P*-1A5N.......................118 DDMMZ24C7PN......................152 DDMV24H7SYA197....................73 DDMZ50PNK87........................6 DEJK9P*-1A6N.......................118 DDMMZ24C7SN......................153 DDMV36C4PNK87.....................54 DDMZ50SNA197.......................7 DEJK9P*-1A7N.......................114 DDMMZ24H7PN......................160 DDMV36C4PYK87.....................58 DDNG50P-P1..........................4 DEJK9P*-1A8N.......................114 DDMMZ24H7SN......................161 DDMV36C4SNA197....................55 DDNG50S-P1..........................5 DEJK9P*-1A9N.......................114 DDMMZ24V7PN......................164 DDMV36C4SYA197....................59 DDNGE50P-P1.........................4 DEJK9P*-1ADN ......................116 DDMMZ24V7SN......................165 DDMV36H4PNK87.....................68 DDNGE50S-P1.........................5 DEJK9P*-1AFN.......................114 DDMMZ36C4PN......................152 DDMV36H4PYK87.....................72 DDNGL50P-P1.........................4 DEJK9P*-1AGN ......................116 DDMMZ36C4SN......................153 DDMV36H4SNA197....................69 DDNGL50S-P1.........................5 DEJK9P*-1AHN ......................114 DDMMZ36H4PN......................160 DDMV36H4SYA197....................73 DDNGX50P-P1.........................4 DEJK9P*-1AJN.......................116 DDMMZ36H4SN......................161 DDMV43C2PNK87.....................54 DDNGX50S-P1.........................5 DEJK9P*-1APN ......................118 DDMMZ36V4PN......................164 DDMV43C2PYK87.....................58 DDNGZ50P-P1.........................4 DEJK9P*-1ATN.......................118 DDMMZ36V4SN......................165 DDMV43C2SNA197....................55 DDNGZ50S-P1.........................5 DEJK9P*-1AUN ......................118 DDMMZ43C2PN......................152 DDMV43C2SYA197....................59 DDX50P-0L2-K87-146..................10 DEJK9P*-1AVN ......................116 DDMMZ43C2SN......................153 DDMV43H2PNK87.....................68 DDX50PK87..........................32 DEJK9P*-1AWN......................116 DDMMZ43H2PN......................160 DDMV43H2PYK87.....................72 DDX50S-0L2-A197-146 .................11 DEJK9P*-1U0N ......................108 DDMMZ43H2SN......................161 DDMV43H2SNA197....................69 DDX50SA197.........................33 DEJK9P*-1U7N ......................112 DDMMZ43V2PN......................164 DDMV43H2SYA197....................73 DE-59-20.......................195, 218 DEJK9P*-1U7N-146...................112 DDMMZ43V2SN......................165 DDMV47C1PNK87.....................54 DE-60-20.......................195, 218 DEJK9P*-OL4 .......................120 DDMMZ47C1PN......................152 DDMV47C1PYK87.....................58 DE111805-1.........................216 DEJK9S*-1A0N.......................111 DDMMZ47C1SN......................153 DDMV47C1SNA197....................55 DE111805-5.........................216 DEJK9S*-1A5N.......................119 DDMMZ47H1PN......................160 DDMV47C1SYA197....................59 DE111813...........................216 DEJK9S*-1A6N.......................119 DDMMZ47H1SN......................161 DDMV47H1PNK87.....................68 DE111813-3.........................216 DEJK9S*-1A7N.......................115 DDMMZ47V1PN......................164 DDMV47H1PYK87.....................72 DE111919...........................215 DEJK9S*-1A8N.......................115 DDMMZ47V1SN......................165 DDMV47H1SNA197....................69 DE111920...........................214 DEJK9S*-1A9N.......................115 DDMN24C7PNK87.....................54 DDMV47H1SYA197....................73 DE115339 ..........................207 DEJK9S*-1ADN ......................117 DDMN24C7PYK87.....................58 DDMV50PNK87........................6 DE115339-20........................205 DEJK9S*-1AFN.......................115 DDMN24C7SNA197....................55 DDMV50SNA197.......................7 DE115386-101A......................195 DEJK9S*-1AGN ......................117 DDMN24C7SYA197....................59 DDMY24W7PK87 .....................78 DE115386-1B........................207 DEJK9S*-1AHN ......................115 DDMN24H7PNK87.....................68 DDMY24W7PNM.....................188 DE121073-154.......................200 DEJK9S*-1AJN.......................117 DDMN24H7PYK87.....................72 DDMY24W7SA197.....................79 DE121073-54........................200 DEJK9S*-1APN ......................119 DDMN24H7SNA197....................69 DDMY24W7SNM.....................189 DE19977-47.....................193, 195 DEJK9S*-1ATN.......................119 DDMN24H7SYA197....................73 DDMY36W4PK87 .....................78 DE19977-5 .........................204 DEJK9S*-1AUN ......................119 DDMN36C4PNK87.....................54 DDMY36W4PNM.....................188 DE24657...........................203 DEJK9S*-1AVN ......................117 DDMN36C4PYK87.....................58 DDMY36W4SA197.....................79 DE24657-16.....................192, 195 DEJK9S*-1AWN......................117 DDMN36C4SNA197....................55 DDMY36W4SNM.....................189 DE44994...........................203 DEJK9S*-1U0N ......................109 e DDMN36C4SYA197....................59 DDMY43W2PK87 .....................78 DE44994-2 .........................192 DEJK9S*-1U7N ......................113 c DDMN36H4PNK87.....................68 DDMY43W2PNM.....................188 DE50904-1..........................218 DEJK9S*-1U7N-146...................113 DDMN36H4PYK87.....................72 DDMY43W2SA197.....................79 DE51218 ...........................206 DEJK9S*-OL4 .......................121 r DDMN36H4SNA197....................69 DDMY43W2SNM.....................189 DE51219 ...........................206 DEJKE9P*-1A0N......................110 u DDMN36H4SYA197....................73 DDMY47W1PK87......................78 DE51224-1..........................210 DEJKE9P*-1U0N .....................108 DDMN43C2PNK87.....................54 DDMY47W1PNM .....................188 DE53750...........................218 DEJKE9P*-OL4 ......................120 o DDMN43C2PYK87.....................58 DDMY47W1SA197.....................79 DE9P-0L2-K87........................10 DEJKE9P*-OL4-146...................120 DDMN43C2SNA197....................55 DDMY47W1SNM .....................189 DE9P-1A5N-K87 ......................26 DEJKE9S*-1A0N......................111 s DDMN43C2SYA197....................59 DDMY50P ..........................140 DE9P-1A6N-K87 ......................26 DEJKE9S*-1U0N .....................109 e DDMN43H2PNK87.....................68 DDMY50PNM........................180 DE9P-1A7N-K87 ......................22 DEJKE9S*-OL4 ......................121 R DDMN43H2PYK87.....................72 DDMY50PNM*1AON ..................176 DE9P-1A8N-K87 ......................22 DEJKE9S*-OL4-146...................121 DDMN43H2SNA197....................69 DDMY50POL3NM.....................172 DE9P-1A9N-K87 ......................22 DEJKX9P*-1A0N......................110 DDMN43H2SYA197....................73 DDMY50S ..........................141 DE9P-1ADN-K87......................24 DEJKX9P*-OL4 ......................120 DDMN47C1PNK87.....................54 DDMY50SNM........................181 DE9P-1AFN-K87 ......................22 DEJKX9P*-OL4-146...................120 s DDMN47C1PYK87.....................58 DDMY50SNM*1AON ..................177 DE9P-1AJN-K87 ......................24 DEJKX9S*-1A0N......................111 ’ DDMN47C1SNA197....................55 DDMY50SOL3NM.....................173 DE9P-1AON-K87......................20 DEJKX9S*-OL4 ......................121 r DDMN47C1SYA197....................59 DDMZ24C7PNK87.....................54 DE9P-1ATN-K87 ......................26 DEJKX9S*-OL4-146...................121 DDMN47H1PNK87.....................68 DDMZ24C7PYK87.....................58 DE9P-1AUN-K87......................26 DEJT9P............................122 e DDMN47H1PYK87.....................72 DDMZ24C7SNA197....................55 DE9P-1AVN-K87 ......................24 DEJT9S*...........................123 d DDMN47H1SNA197....................69 DDMZ24C7SYA197....................59 DE9P-1AWN-K87......................24 DEJTE9P...........................122 DDMN47H1SYA197....................73 DDMZ24H7PNK87.....................68 DE9P-F179A-K87......................12 DEJTE9S*..........................123 a DDMN50PNK87........................6 DDMZ24H7PYK87.....................72 DE9PK87............................32 DEJTX9P...........................122 e DDMN50SNA197.......................7 DDMZ24H7SNA197....................69 DE9S-0L2-A197.......................11 DEJTX9S*..........................123 DDMP24C7PJK87.....................46 DDMZ24H7SYA197....................73 DE9S-1A5N-A197 .....................27 DEM-5W1P-1A0N-K87..................74 R DDMP24C7SJA197....................47 DDMZ36C4PNK87.....................54 DE9S-1A6N-A197 .....................27 DEM-5W1P-1A7N-K87..................74 Dimensions are shown in mm (inch) 294 Dimensions subject to change

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DEM-5W1P-NMB-76 ..................195 DEM9SNM..........................181 DEMM5W1P.........................166 DEMMZ5V1SN.......................163 DEM-5W1P-NMB-77 ..................195 DEM9SNM*1A7N.....................179 DEMM5W1S.........................167 DEMN5C1PNK87......................52 DEM-5W1P-NMC-76 ..................195 DEM9SNM*1A9N.....................179 DEMM9P...........................140 DEMN5C1PYK87......................56 DEM-5W1P-OL2-K87...................76 DEM9SNM*1AON.....................177 DEMM9PA..........................132 DEMN5C1SNA197.....................53 DEM-5W1P-OL4-K87...................76 DEM9SNMB77.......................195 DEMM9PB..........................136 DEMN5C1SYA197 .....................57 DEM-5W1S-1A0N-A197.................75 DEM9SNMBK52......................195 DEMM9PC..........................134 DEMN5H1PNK87......................66 DEM-5W1S-1A7N-A197.................75 DEM9SNMC76.......................195 DEMM9PD..........................132 DEMN5H1PYK87......................70 DEM-5W1S-NMB-77 ..................195 DEM9SOL3NM.......................173 DEMM9PE..........................136 DEMN5H1SNA197.....................67 DEM-5W1S-NMC-76 ..................195 DEM9SOL3NMBK52...................195 DEMM9PF..........................134 DEMN5H1SYA197 .....................71 DEM-5W1S-OL2-A197..................77 DEM9SP ...........................135 DEMM9PF179 .......................138 DEMN9PNK87.........................6 DEM-5W1S-OL4-A197..................77 DEM9SR ...........................135 DEMM9PF179A ......................138 DEMN9SNA197........................7 DEM-9P-NMB-76.....................195 DEM9SS ...........................133 DEMM9PG..........................132 DEMP5C1PJK87 ......................44 DEM-9S-NMB-76.....................195 DEM9SW...........................133 DEMM9PH..........................136 DEMP5C1PVK87......................50 DEM-9S-NMC-77.....................195 DEM9SX ...........................137 DEMM9PK..........................134 DEMP5C1SJA197......................45 DEM5W1P1A0NNMBK52 ...............195 DEM9SZ............................137 DEMM9PL..........................132 DEMP5C1SVA197......................51 DEM5W1P1A7NNMBK52 ...............195 DEMA15PNM........................184 DEMM9PM..........................136 DEMP5H1PJK87 ......................60 DEM5W1P1A9NNMBK52 ...............195 DEMA15PNMBK47FO..................195 DEMM9PP..........................134 DEMP5H1SJA197......................61 DEM5W1PF179ANMBK52...............195 DEMA15SNM........................185 DEMM9PR..........................134 DEMP5P1PVK87 ......................64 DEM5W1PK87........................78 DEMA15SNMBK47FO..................195 DEMM9PS..........................132 DEMP5P1SVA197 .....................65 DEM5W1PNM .......................188 DEMA25PNMBK47FO..................195 DEMM9PW .........................132 DEMP9PJK87.........................16 DEM5W1PNMBK52 ...................195 DEMA25SNMBK47FO..................195 DEMM9PX..........................136 DEMP9SJA197........................17 DEM5W1POL3NMBK52................195 DEMA37PNMBK47FO..................195 DEMM9PZ..........................136 DEMPPNMB77.......................195 DEM5W1S1A0NNMBK52 ...............195 DEMA37SNMBK47FO..................195 DEMM9S...........................141 DEMV5C1PNK87......................52 DEM5W1S1A7NNMBK52 ...............195 DEMA50PNMBK47FO..................195 DEMM9SA..........................133 DEMV5C1PYK87......................56 DEM5W1S1A9NNMBK52 ...............195 DEMA50SNMBK47FO..................195 DEMM9SB..........................137 DEMV5C1SNA197 .....................53 DEM5W1SA197.......................79 DEMA9PNM.........................182 DEMM9SC..........................135 DEMV5C1SYA197 .....................57 DEM5W1SF179ANMBK52...............195 DEMA9PNMBK47FO...................195 DEMM9SD..........................133 DEMV5H1PNK87......................66 DEM5W1SNM .......................189 DEMA9PNMBK52.....................195 DEMM9SE..........................137 DEMV5H1PYK87......................70 DEM5W1SNMBK52 ...................195 DEMA9SNM.........................183 DEMM9SF..........................135 DEMV5H1SNA197.....................67 DEM5W1SOL3NMBK52................195 DEMA9SNMBK47FO...................195 DEMM9SF179 .......................139 DEMV5H1SYA197......................71 DEM9P ............................140 DEMA9SNMBK52.....................195 DEMM9SF179A ......................139 DEMV9PNK87.........................6 DEM9P1A0NNMBK52..................195 DEMAK15PNMBK47FO.................195 DEMM9SG..........................133 DEMV9SNA197........................7 DEM9P1A7NNMBK52..................195 DEMAK15SNMBK47FO.................195 DEMM9SH..........................137 DEMY5W1PK87.......................78 DEM9P1A9NNMBK52..................195 DEMAK25PNMBK47FO ................195 DEMM9SK..........................135 DEMY5W1PNM ......................188 DEM9PA ...........................132 DEMAK25SNMBK47FO ................195 DEMM9SL..........................133 DEMY5W1SA197......................79 DEM9PB ...........................136 DEMAK37PNMBK47FO ................195 DEMM9SM..........................137 DEMY5W1SNM ......................189 DEM9PC ...........................134 DEMAK37SNMBK47FO ................195 DEMM9SP..........................135 DEMY9P ...........................140 DEM9PD ...........................132 DEMAK50PNMBK47FO ................195 DEMM9SR..........................135 DEMY9PNM.........................180 DEM9PE............................136 DEMAK9PNMBK47FO .................195 DEMM9SS..........................133 DEMY9PNM*1AON....................176 DEM9PF............................134 DEMAK9SNMBK47FO .................195 DEMM9SW .........................133 DEMY9POL3NM......................172 DEM9PF179.........................138 DEMAY15PNM.......................184 DEMM9SX..........................137 DEMY9S............................141 DEM9PF179A........................138 DEMAY15SNM.......................185 DEMM9SZ..........................137 DEMY9SNM.........................181 DEM9PF179ANMBK52.................195 DEMAY9PNM........................182 DEMMC5C1PJ.......................146 DEMY9SNM*1AON....................177 DEM9PG ...........................132 DEMAY9SNM........................183 DEMMC5C1SJ.......................147 DEMY9SOL3NM......................173 DEM9PH ...........................136 DEMB-5W1S-NMB-76 .................195 DEMMC5H1PJ.......................154 DEMZ5C1PNK87 ......................52 DEM9PK ...........................134 DEMB-9S-NMC-77....................195 DEMMC5H1SJ.......................155 DEMZ5C1PYK87 ......................56 DEM9PL............................132 DEMB9S-NMB-76 ....................195 DEMMD5C1PJ.......................146 DEMZ5C1SNA197 .....................53 DEM9PLNM.........................174 DEMB9S-NMC-76 ....................195 DEMMD5C1SJ.......................147 DEMZ5C1SYA197......................57 DEM9PM...........................136 DEMB9SNMB77......................195 DEMMD5H1PJ.......................154 DEMZ5H1PNK87......................66 DEM9PNM..........................180 DEMC5C1PJK87 ......................44 DEMMD5H1SJ.......................155 DEMZ5H1PYK87 ......................70 DEM9PNM*1A7N.....................178 DEMC5C1PVK87......................50 DEMME5W1P........................166 DEMZ5H1SNA197 .....................67 DEM9PNM*1A9N.....................178 DEMC5C1SJA197 .....................45 DEMME5W1S........................167 DEMZ5H1SYA197......................71 DEM9PNM*1AON.....................176 DEMC5C1SVA197 .....................51 DEMME9P..........................140 DEMZ9PNK87.........................6 DEM9PNMBK52......................195 DEMC5H1PJK87 ......................60 DEMME9S..........................141 DEMZ9SNA197 ........................7 DEM9PNMC76.......................195 DEMC5H1SJA197......................61 DEMMG5C1PJ.......................146 DENG9P-P1...........................4 DEM9PNMC77.......................195 DEMC5P1PVK87......................64 DEMMG5C1SJ.......................147 DENG9S-P1...........................5 DEM9POL3NM.......................172 DEMC5P1SVA197 .....................65 DEMMG5H1PJ.......................154 DENGE9P-P1..........................4 DEM9POL3NMBK52...................195 DEMC9SJA197........................17 DEMMG5H1SJ.......................155 DENGE9S-P1..........................5 DEM9PP ...........................134 DEMCP9PJK87 .......................16 DEMMN5C1PN.......................150 DENGL9P-P1..........................4 R DEM9PR ...........................134 DEMD5C1PJK87 ......................44 DEMMN5C1SN.......................151 DENGL9S-P1..........................5 DEM9PS ...........................132 DEMD5C1PVK87......................50 DEMMN5H1PN.......................158 DENGX9P-P1..........................4 e DEM9PW...........................132 DEMD5C1SJA197 .....................45 DEMMN5H1SN.......................159 DENGX9S-P1..........................5 a DEM9PX ...........................136 DEMD5C1SVA197 .....................51 DEMMN5V1PN.......................162 DENGZ9P-P1..........................4 DEM9PZ............................136 DEMD5H1PJK87......................60 DEMMN5V1SN.......................163 DENGZ9S-P1..........................5 d DEM9S.............................141 DEMD5H1SJA197......................61 DEMMP5C1PJ.......................146 DEW9P*............................38 e DEM9S1A0NNMBK52..................195 DEMD5P1PVK87......................64 DEMMP5C1SJ.......................147 DEW9P*G...........................38 DEM9S1A7NNMBK52..................195 DEMD5P1SVA197 .....................65 DEMMP5H1PJ.......................154 DEW9S*............................39 r DEM9S1A9NNMBK52..................195 DEMD9PJK87 ........................16 DEMMP5H1SJ.......................155 DEW9S*G...........................39 ’ DEM9SA ...........................133 DEMD9SJA197........................17 DEMMV5C1PN.......................150 DEWE9P*...........................38 s DEM9SB ...........................137 DEME5W1PK87.......................78 DEMMV5C1SN.......................151 DEWE9P*G..........................38 DEM9SC ...........................135 DEME5W1SA197......................79 DEMMV5H1PN.......................158 DEWE9S*...........................39 DEM9SD ...........................133 DEME9P............................140 DEMMV5H1SN.......................159 DEWE9S*G..........................39 R DEM9SE ...........................137 DEME9S............................141 DEMMV5V1PN.......................162 DEX9P-0L2-K87-146...................10 DEM9SF............................135 DEMG5C1PJK87 ......................44 DEMMV5V1SN.......................163 DEX9PK87...........................32 e DEM9SF179.........................139 DEMG5C1PVK87......................50 DEMMY5W1P........................166 DEX9S-0L2-A197-146...................11 DEM9SF179A........................139 DEMG5C1SJA197 .....................45 DEMMY5W1S........................167 DEX9SA197..........................33 s DEM9SF179ANMBK52.................195 DEMG5C1SVA197 .....................51 DEMMY9P..........................140 DM115224-1010A.................191, 195 o DEM9SG ...........................133 DEMG5H1PJK87......................60 DEMMY9S..........................141 DM115224-1020A.................191, 195 DEM9SH ...........................137 DEMG5H1SJA197......................61 DEMMZ5C1PN.......................150 DM115224-1040A.................191, 195 u DEM9SK ...........................135 DEMG5P1PVK87......................64 DEMMZ5C1SN.......................151 DM115224-2010A.................191, 195 r DEM9SL............................133 DEMG5P1SVA197 .....................65 DEMMZ5H1PN.......................158 DM115224-2020A.................191, 195 DEM9SLNM.........................175 DEMG9PJK87 ........................16 DEMMZ5H1SN.......................159 DM115224-2040A.................191, 195 c DEM9SM...........................137 DEMG9SJA197........................17 DEMMZ5V1PN.......................162 DM115224-3010..................191, 195 e Dimensions are shown in mm (inch) Dimensions subject to change 295

D Subminiature Part Number Index Part Number Page Part Number Page Part Number Page Part Number Page DM115224-3010A.....................191 DM51157-5000 .......................91 DM53743-19.....................87, 195 MDSM-9SC-Z11-VS1 ..................100 DM115224-3020..................191, 195 DM51157-5005....................91, 195 DM53743-2..........................87 ZDA15P-1AKN-146.....................28 DM115224-3020A ....................191 DM51157-8 ......................91, 195 DM53743-3..........................87 ZDA15P-A191.........................34 DM115224-3040..................191, 195 DM53740 ...........................86 DM53743-5..........................87 ZDA15P-OL2..........................8 DM115224-3040A ....................191 DM53740-1..........................86 DM53743-5000.......................87 ZDA15S-1AKN-146.....................29 DM115224-4010..................191, 195 DM53740-15.....................86, 195 DM53743-5001.......................87 ZDA15S-A191.........................35 DM115224-4010A.....................191 DM53740-16.....................86, 195 DM53743-5003.......................87 ZDA15S-OL2..........................9 DM115224-4020..................191, 195 DM53740-17.....................86, 195 DM53743-5004.......................87 ZDAE15P-OL2-146......................8 DM115224-4020A ....................191 DM53740-18.....................86, 195 DM53743-5073.......................87 ZDAE15S-OL2-146......................9 DM115224-4040..................191, 195 DM53740-3..........................86 DM53743-5074.......................87 ZDAL15P-1AKN-146....................28 DM115224-4040A ....................191 DM53740-35.........................86 DM53743-5076.......................87 ZDAL15S-1AKN-146....................29 DM115740-12 .......................195 DM53740-36........................190 DM53743-5077.......................87 ZDB25P-1AKN-146.....................28 DM115740-13 .......................195 DM53740-5..........................86 DM53743-6..........................87 ZDB25P-A191 ........................34 DM115740-19 .......................195 DM53740-5000.......................86 DM53744-1..........................90 ZDB25P-OL2..........................8 DM115740-5036 .....................195 DM53740-5001.......................86 DM53744-107........................93 ZDB25S-1AKN-146.....................29 DM115740-5046 .....................195 DM53740-5002.......................86 DM53744-21.....................90, 191 ZDB25S-A191 ........................35 DM115740-5047 .....................195 DM53740-5005.......................86 DM53744-24.....................90, 191 ZDB25S-OL2..........................9 DM115741-5032 .....................195 DM53740-5008.......................86 DM53744-25.....................90, 191 ZDBE25P-OL2-146......................8 DM115741-5048 .....................195 DM53740-5099.......................86 DM53744-6..........................90 ZDBE25S-OL2-146......................9 DM115741-7 ........................195 DM53740-5100.......................86 DM53744-62........................191 ZDBL25P-1AKN-146....................28 DM115741-8 ........................195 DM53740-5101.......................86 DM53744-63........................191 ZDBL25S-1AKN-146....................29 DM115742-13 .......................195 DM53740-5104.......................86 DM53744-64........................191 ZDC37P-1AKN-146 ....................28 DM115742-14 .......................195 DM53740-5105.......................86 DM53744-7..........................90 ZDC37P-A191 ........................34 DM115742-15 .......................195 DM53740-5145.......................86 DM53744-92.........................93 ZDC37P-OL2..........................8 DM115742-5028 .....................195 DM53740-5147......................190 DM53744-95.........................93 ZDC37S-1AKN-146 ....................29 DM115742-5039 .....................195 DM53741............................87 DM53745-1..........................90 ZDC37S-A191 ........................35 DM115742-5075 .....................195 DM53741-1..........................87 DM53745-104........................93 ZDC37S-OL2..........................9 DM115743-20 .......................195 DM53741-10 .....................87, 195 DM53745-107........................93 ZDCE37P-OL2-146......................8 DM115743-22 .......................195 DM53741-11 .....................87, 195 DM53745-120........................93 ZDCE37S-OL2-146......................9 DM115743-5040 .....................195 DM53741-12 .....................87, 195 DM53745-126........................95 ZDCL37P-1AKN-146....................28 DM115743-5064 .....................195 DM53741-13 .....................87, 195 DM53745-25.....................90, 191 ZDCL37S-1AKN-146....................29 DM130321-3.........................92 DM53741-3..........................87 DM53745-27.....................90, 191 ZDD50P-A191 ........................34 DM130338...........................90 DM53741-4..........................87 DM53745-28.....................90, 191 ZDD50P-OL2..........................8 DM130338-1 .....................90, 191 DM53741-5000.......................87 DM53745-7..........................90 ZDD50S-A191 ........................35 DM130338-4.........................90 DM53741-5001.......................87 DM53745-70........................191 ZDD50S-OL2..........................9 DM130339...........................90 DM53741-5003.......................87 DM53745-72........................191 ZDDE50P-OL2-146 .....................8 DM130339-1 .....................90, 191 DM53741-5004.......................87 DM53745-77........................191 ZDDE50S-OL2-146 .....................9 DM130339-4.........................90 DM53741-5059.......................87 DM53745-8..........................90 ZDE9P-1AKN-146......................28 DM130340...........................90 DM53741-5060.......................87 M24308/26-1 .......................209 ZDE9P-A191..........................34 DM130340-1 .....................90, 191 DM53741-5062.......................87 M24308/26-2 .......................209 ZDE9P-OL2...........................8 DM130340-4.........................90 DM53741-5063.......................87 M85049/48-1-1......................203 ZDE9S-1AKN-146......................29 DM130341...........................90 DM53742 ...........................86 M85049/48-1-2......................203 ZDE9S-A191..........................35 DM130341-1.........................90 DM53742-1..........................86 M85049/48-1-3......................203 ZDE9S-OL2...........................9 DM130341-4.........................90 DM53742-16.....................86, 195 M85049/48-1-4......................203 ZDEE9P-OL2-146.......................8 DM130342...........................90 DM53742-17.....................86, 195 M85049/48-1-5......................203 ZDEE9S-OL2-146.......................9 DM130342-1.........................90 DM53742-18.....................86, 195 M85049/48-2-1......................203 ZDEL9P-1AKN-146.....................28 DM130342-4.........................90 DM53742-19.....................86, 195 M85049/48-2-2......................203 ZDEL9S-1AKN-146.....................29 DM130343...........................90 DM53742-3..........................86 M85049/48-2-3......................203 ZEDA15PBA..........................18 DM130343-1.........................90 DM53742-36.........................86 M85049/48-2-4......................203 ZEDA15SBA..........................19 DM130343-4.........................90 DM53742-37........................190 M85049/48-2-5......................203 ZEDAL15PBA.........................18 DM130346-2.........................92 DM53742-5..........................86 M85049/48-3-2......................204 ZEDAL15SBA.........................19 DM130352-2.........................92 DM53742-5000.......................86 M85049/48-3-3......................204 ZEDB25PBA..........................18 DM130358-2.........................92 DM53742-5001.......................86 M85049/48-3-4......................204 ZEDB25SBA..........................19 DM13041-1..........................191 DM53742-5002.......................86 M85049/48-3-5......................204 ZEDBL25PBA.........................18 DM13042-1 .........................191 DM53742-5004.......................86 M85049/50-1 .......................204 ZEDBL25SBA.........................19 DM13043-1 .........................191 DM53742-5006.......................86 M85049/50-2 .......................204 ZEDC37PBA..........................18 DM51155............................91 DM53742-5085.......................86 M85049/50-3 .......................204 ZEDC37SBA..........................19 DM51155-12 .........................94 DM53742-5086.......................86 M85049/50-4 .......................204 ZEDCL37PBA.........................18 e DM51155-13 .........................94 DM53742-5089.......................86 M85049/50-5 .......................204 ZEDCL37SBA.........................19 c DM51155-5000 .......................91 DM53742-5091.......................86 MDSM-15PE-Z10-VR22.................99 ZEDE9PBA...........................18 DM51155-5004 .......................91 DM53742-5092.......................86 MDSM-15SC-Z11-VS1..................100 ZEDE9SBA...........................19 r DM51155-5005 ......................195 DM53742-5126.......................86 MDSM-18PE-Z10-VR25.................99 ZEDEL9PBA..........................18 u DM51155-7 ......................91, 195 DM53742-5127......................190 MDSM-25PE-Z10-VR17.................99 ZEDEL9SBA..........................19 DM51157............................91 DM53743-16.....................87, 195 MDSM-25SC-Z11-VS1 .................100 o DM51157-13 .........................94 DM53743-17.....................87, 195 MDSM-30PE-Z10-VR22.................99 DM51157-14 .........................94 DM53743-18.....................87, 195 MDSM-9PE-Z10-VR25..................99 s e R s ’ r e d a e R Dimensions are shown in mm (inch) 296 Dimensions subject to change

Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION 3 HANDLING IMPORTANT GENERAL INFORMATION WITH THE PRODUCT DATA SHEET/CATALOG. Care must be taken to avoid damage to any (i) Air and creepage paths/Operating voltage FAILURE TO OBSERVE THE ADVICE IN THIS component parts of electrical connectors The admissible operating voltages depend on the INFORMATION SHEET AND THE OPERATING during installation and use. Although there are individual applications and the valid national and CONDITIONS SPECIFIED IN THE PRODUCT DATA normally no sharp edges, care must be taken other applicable safety regulations. SHEET/CATALOG COULD RESULT IN when handling certain components to avoid For this reason the air and creepage path data are HAZARDOUS SITUATIONS. injury to fingers. only reference values. Observe reduction of air and Electrical connectors may be damaged in transit creepage paths due to PC board and/or 1 MATERIAL CONTENT AND PHYSICAL FORM to the customers, and damage may result in harnessing. Electrical connectors do not usually contain creation of hazards. Products should therefore hazardous materials. They contain conducting be examined prior to installation/use and (ii) Temperature and non-conducting materials and can be rejected if found to be damaged. All information given are temperature limits. The divided into two groups. operation temperature depends on the individual a) Printed circuit types and low cost audio types 4 DISPOSAL application. which employ all plastic insulators and casings. Incineration of certain materials may release b) Rugged, Fire Barrier and High Reliability types noxious or even toxic fumes. (iii) Other important information with metal casings and either natural rubber, ITT Cannon continuously endeavours to improve synthetic rubber, plastic or glass insulating 5 APPLICATION their products. Therefore, ITT Cannon products materials. Contact materials vary with type of Connectors with exposed contacts should not may deviate from the description, technical data connector and also application and are usually be selected for use on the current supply side of and shape as shown in this catalog and data manufactured from either: Copper, copper an electrical circuit, because an electric shock sheets. alloys, nickel, alumel, chromel or steel. In could result from touching exposed contacts on special applications, other alloys may be an unmated connector. Voltages in excess of 30 specified. V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such 2 FIRE CHARACTERISTICS AND ELECTRIC voltages cannot be transmitted in any way to SHOCK HAZARD exposed metal parts of the connector body. The There is no fire hazard when the connector is connector and wiring should be checked, before correctly wired and used within the specified making live, to have no damage to metal parts or parameters. Incorrect wiring or assembly of insulators, no solder blobs, loose strands, the connector or careless use of metal tools or conducting lubricants, swarf, or any other conductive fluids, or transit damage to any of undesired conducting particles. Circuit the component parts may cause electric resistance and continuity check should be shock or burns. Live circuits must not be made to make certain that there are no high broken by separating mated connectors as resistance joints or spurious conducting paths. this may cause arcing, ionisation and burning. Always use the correct application tools as Heat dissipation is greater at maximum specified in the Data Sheet/Catalog. resistance in a circuit. Hot spots may occur Do not permit untrained personnel to wire, when resistance is raised locally by damage, assemble or tamper with connectors. For e.g. cracked or deformed contacts, broken operation voltage please see appropriate strands of wire. Local overheating may also national regulations. result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. R If heating is allowed to continue it intensifies by e further increasing the local resistance through loss of temper of spring contacts, formation of a oxide film on contacts and wires and leakage d currents through carbonisation of insulation and e tracking paths. Fire can then result in the r presence of combustible materials and this may ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be ’ release noxious fumes. Overheating may not be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating s visually apparent. Burns may result from specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to touching overheated components. create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under R this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with e the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively s subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon o does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its u use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon’s prior consent must be obtained in all cases. r c e Dimensions are shown in mm (inch) Dimensions subject to change 229977

W E ’ R E P A R T O F Y O U R W O R L D I N I N T E R C O N N E C T T E C H N O L O G Y We are focused on your world with Innovation, Experience, Reliability & Responsiveness.

T Don’t blink. oday, we serve nearly every industry in which the increased demand for reliable and innovative interconnect No industry in the world moves systems is critical: faster than electronics. Take a (cid:3) Computers (Personal computers, I portables and peripherals) I N N O V A T I O N snapshot of it today, and it all (cid:3) Telecommunications (Network systems and services/LAN; mobile) changes by tomorrow. A commitment to concurrent engineering (cid:3) Transportation (Automobiles, heavy- helps you reach your markets faster duty vehicles, rail and mass transit) When you need to bring your (cid:3) Military/Aerospace (Commercial and Let us bring our spirit of innovation to military aircraft, defense and space) your world. Experienced engineering products to market more quickly, (cid:3) Industrial (Factory automation and teams located throughout the globe work instrumentation) hand-in-hand with our customers. And you most likely seek a partner who since these teams are thoroughly (cid:3) Medical (Diagnostic equipment) networked together, you benefit from 24 moves just as fast as you do. A (cid:3) Broadcasting hour-a-day concurrent engineering company at the forefront with the (cid:3) Consumer Products capability. These teams advance your project from initial product concepts to latest in products and service. As ITT Cannon begins our ninth decade final design and into production. in business, we are proud to provide our Our teams are experts in computer- global and regional customers with the based design, modeling and analysis to A most reliable electronic products and assure robust product designs. We are services available: also well-versed in performance t ITT Cannon, we have made it (cid:3) Interconnects and cable assemblies simulation, as well as verification of our business to understand your world. mechanical and electrical properties. Or should we say, the many parts of your (cid:3) RF connectors ITT Cannon utilizes Pro/ENGINEER* world: (cid:3) Switches and conductive rubber software which allows us to develop (cid:3) The places in the world where you do switchpads products and manufacturing processes business. (cid:3) Test accessories concurrently, and to easily evaluate (cid:3) The products you bring to the world. (cid:3) I/O card, memory card and smart multiple design alternatives. This means (cid:3) The service you require from card interconnects better designed products, produced suppliers to compete in the world. (cid:3) Local area network components faster and at a lower cost. At ITT Cannon, we are proud of a (copper and fiber optic) ITT Cannon’s Integrated Product heritage that helped pioneer the (cid:3) Turn-key network systems and Development process (IPD) allows us to electronics industry from its infancy in minimize cycle time for first article and services the early part of this century, to the volume production. (cid:3) Customer use tooling highly advanced technologies of the *A trademark of Parametric Technology Corp. present.

I I ITT Cannon has also met or exceeded V the quality system requirements from all E X P E R I E N C E A N I N V I T A T I O N customers who have conducted audits. T O S H A R E We participate in ship-to-stock programs Worldwide capacity to meet all of your with many of these customers worldwide Y O U R W O R L D delivery requirements and have received numerous quality and Our decades of manufacturing preferred supplier awards from Innovation. Experience. Reliability. experience, help us bring the latest customers throughout the world in each Responsiveness. products to your world. With automated of the industries we serve. At ITT Cannon, these are the strengths manufacturing capacity strategically that we bring to our customers each and located in North America, Europe and every day. Just as we have for nearly nine Asia, we can produce products in either I V decades. We pride ourselves on a level of large or small quantities to quickly meet R E S P O N S I V E N E S S service and manufacturing know-how your exact requirements. that has enabled us to lead our industry. ITT Cannon is able to modify existing A singular focus on responding to your Exceeding your expectations — not just products to suit special customer needs meeting them — is how we approach requirements. With global every project. manufacturing capacity in every We know that to be responsive, we must continent, we are also able to source know your world inside and out: your With the world moving faster all the product from the location that best suits particular company, your industry and time, ITT Cannon is a partner who can your needs. This means we have the your challenges. Each of ITT Cannon’s help you get your products to market not flexibility to select the most thousands of employees worldwide is just on time, but ahead of the advantageous shipping methods and focused on responding to you with competition. other logistical options. timely and dependable information — At ITT Cannon, we realize that each and on ensuring that we keep the customer we serve has their own special ITT Cannon has established Centers of commitments we make. For instance, our needs and expectations. That is why we Excellence for world class capabilities globally linked computer system tracks would welcome the opportunity to such as: Machining, stamping, surface the status of your order anywhere in the discuss your project, your company, your plating, molding, cable assembly and world. industry — yes, your world. network systems technology — all utilizing the most advanced CAM You also benefit from our field equipment. applications and sales network, which provides industry-specific knowledge to help you design in the best product for I I I your application. Our distribution network is one of the R E L I A B I L I T Y most extensive in the industry, and can provide you off-the-shelf product to We don’t stop at ‘‘world class quality’’ — meet the most challenging delivery Continuous improvement is our standard requirements. Our goal is to bring world class electronics to your world. This commitment to perfection has helped ITT Cannon’s global facilities earn ISO 9000 certification. We have invested in world class process controls for both assembly and component manufacturing. “ITT” and “Cannon“ are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. ©2017 ITT Inc. ITT Cannon D-Subminiature Catalog | 20170721 Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I TT Cannon: DBA-25S-A197-F0 DCM-37S DEMM-9P DEMM-9S DEM-9P DAM-15P DCMM-37P DEM-9S DAM-15S DBMM- 25S-X DBMM-25S-Z DBMM-25S-P DBMM-25S-G DBMM-25S-D DBMM-25S-M DBMM-25S-S DBMM-25S-H DBMM-25S-C DBMM-25S-W DBMM-25S-L DBMM-25S-A DBMM-25S-L-A214 DBMM-25S-F DBMM-25S-B DBMM- 25S-F179 DBMM-25S DBMM-25S-F179A DBMM-25S-E DCM-37P DAMM-15P DBM-25P-S DBM-25P-W DBM- 25P-R DBM-25P-K87 DBM-25P-D-A214 DBM-25P-H DBM-25P-K127 DBM-25P-G DBM-25P-M DBM-25P-L DBM- 25P-F DBM-25P-P-NMBK52 DBM-25P-C DBM-25P-K DBM-25P-B DBM-25P DBM-25P-D DBM-25P-X DBM-25P- E DBM-25P-A DBM-25P-F179A DBM-25P-P DDM-50S DDMM-50P DDMM-50S M24308/24-35F DAMM-15S DBM-25S-H DBM-25S DBM-25S-A197 DBM-25S-D-NMBK52 DBM-25S-0L3-NMBK52 DBM-25S-S DBM-25S-F179 DBM-25S-D DBM-25S-Z DBM-25S-L DBM-25S-F179A DBM-25S-E DBM-25S-W DBM-25S-B DBM-25S-A DBM- 25S-N-K126 DBM-25S-G DBM-25S-K126 DBM-25S-K DBMM-25P DBMM-25P-F179 DBMM-25P-S DBMM-25P-Z DBMM-25P-B DBMM-25P-A-A159 DBMM-25P-H-A214 DBMM-25P-C DBMM-25P-M DBMM-25P-F179A DBMM- 25P-D DBMM-25P-A-A101 DBMM-25P-E DBMM-25P-H DBMM-25P-W DBMM-25P-K DBMM-25P-L DBMM-25P-X DBMM-25P-A DBMM-25P-Z-A101 DBMM-25P-F DBMM-25P-P DBMM-25P-G DCMM-37S