Power entry modules without line filter DC11 https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole Screw-on mounting Snap-in version Screw-on mounting and line Switch illuminated non-illuminated non-illuminated green C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel mount : - All single elements are already wired Screw-on version from front or rear side, snap-in version from front - Unwired versions available on request side - Line switch non-illuminated or illuminated - Appliance Inlet protection class I or II , Line Switch 1- or 2-pole - Ideal for application with high transient loads - V-Lock notch standard - Suitable for use in equipment according to IEC/UL 60950 - Quick connect terminals 4.8 x 0.8 mm Other versions on request Unique Selling Proposition - Unwired versions - Ultra compact design - Solder terminals - Line switch for high inrush currents - Line switch with other rocker marking - Components internally wired References - V-Lock cord retaining Alternative: version with line filter DC12 Substitute for type KEB1; KEB2; 6010-K Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, Ratings UL/CSA 15 A / 250 VAC; 50/60 Hz ¹⁾ UL 498, CSA C22.2 no. 42 (for cold Dielectric Strength > 2.5 kVAC between L-N conditions) pin-temperature 70 °C, 10 A, > 3 kVAC between L/N-PE Protection Class I or II (1 min/50 Hz) Line Switch Rocker switch 1 or 2 pole, non-illumina- Allowable Operation Tempe- -25 °C to 70 °C ted or illuminated, acc. to IEC 61058-1 rature Technical Details IP-Protection from front side IP 40 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Quick connect terminals 4.8 x 0.8 mm Panel Thickness S Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 1) Standard version 12 A / special version 15A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC11 Connectors 1

DC11 Power entry modules without line filter https://www.schurter.com /PG05 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40007009 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC Certificate Number: 2013010204594013 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. 2 Connectors

Power entry modules without line filter DC11 https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting R 4 27.3 R 2.5 32.3 2.2 R 3.8 R 6 ° 3x90 3.2 1.3 34 1.15 1) 6. 3 3 5 6 9. 36 35 9.8 17.9 4.2 27 1. 44 R 2.4±0.10 3.6/M3 ±0.10 6 2) 1. 3 27.6±0.10 36±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Snap-in mounting R 4 27.3 R 2.5 32.3 2.2 R 3.8 5 1.3 34 1.1 1) 3 3 5 6 9. 30 35 9.8 17.9 4.2 27 1. S±0.1 R 2.4±0.10 ±0.10 6 2) 1. 3 27.6±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Connectors 3

DC11 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams Line switch non-illuminated 2-pole Line switch illuminated 2-pole Line switch non-illuminated 1-pole L 2 L 2 L 2 1) 2) 1) 2) 1) 2) PE PE' PE PE' PE PE' N 1 N 1 N 1 1) Line 1) Line 1) Line 2) Load 2) Load 2) Load All Variants Rated Current UL Protection Class Panel mounting Panel Thickness Line Switch Illumination Color Order Number s [mm] 12 I Snap-in 1.5 2-pole l red DC11.0021.201 15 I Snap-in 1.5 2-pole l red DC11.0021.206 12 I Snap-in 2 2-pole l red DC11.0021.301 12 I Snap-in 2.5 2-pole l red DC11.0021.401 12 I Snap-in 1.5 2-pole l green DC11.0031.201 █ 12 I Snap-in 2 2-pole l green DC11.0031.301 12 I Snap-in 2.5 2-pole l green DC11.0031.401 12 I Snap-in 1.5 1-pole - DC11.0001.203 █ 15 I Snap-in 1.5 1-pole - DC11.0001.207 12 I Snap-in 2 1-pole - DC11.0001.303 12 I Snap-in 2.5 1-pole - DC11.0001.403 12 I Snap-in 1.5 2-pole - DC11.0001.201 █ 15 I Snap-in 1.5 2-pole - DC11.0001.206 12 I Snap-in 2 2-pole - DC11.0001.301 █ 12 II Snap-in 2 2-pole - DC11.0001.351 15 I Snap-in 2.5 2-pole - 3-107-445 12 I Snap-in 2.5 2-pole - DC11.0001.401 █ 12 I Snap-in 3 2-pole - DC11.0001.501 12 I Screw - 2-pole l red DC11.0021.001 █ 15 I Screw - 2-pole l red DC11.0021.006 12 I Screw - 2-pole l green DC11.0031.001 █ 12 I Screw - 1-pole - DC11.0001.003 █ 15 I Screw - 1-pole - DC11.0001.007 12 I Screw - 2-pole - DC11.0001.001 █ 15 I Screw - 2-pole - DC11.0001.006 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER With screw mounting on PCB, 2 screws are included All variants according VDE (ENEC 10) approved for 10 A Packaging unit 50 Pcs 4 Connectors

Power entry modules without line filter DC11 https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DC11 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120°C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120°C, Rewireable, Angled 4784 Connector further types to DC11 ... Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Power Supply Cord further types to DC11 Connectors 5

DC11 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to DC11 8 1 0 2 9. 0 1. 1 The specifications, descriptions and illustrations indicated in this document are based on current 6 Connectors information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: DC11.0021.201 DC11.0001.203 DC11.0001.201 DC11.0001.303 DC11.0001.301 DC11.0031.001 DC11.0001.403 DC11.0001.401 DC11.0021.401 DC11.0021.001 DC11.0031.201 DC11.0031.401 DC11.0001.001 DC11.0001.003 DC11.0031.301 DC11.0021.301 DC11.0001.006 DC11.0001.007 DC11.0001.206 DC11.0001.207 DC11.0021.006 DC11.0021.206 DC11.0001.001.21 DC11.0001.201.21 DC11.0001.403.21