D3V Miniature Basic Switch Reliable Basic Switch with External Lever ●Available by 21 A, 16 A, 11 A, 6 A and 0.1 A models, all with self-cleaning contacts. ●Available with internally or externally fitted D levers. 3 V RoHS Compliant Model Number Legend @ @ @ @ @ @ @ @ @ D3V- 1 2 3 4 - 5 6 7 - 8 - 9 1. Ratings 5. Contact Form 21 : 20 (4) A at 250 VAC 1 : SPDT 16 : 16 (3) A at 250 VAC 2 : SPST-NC 11 : 11 (3) A at 250 VAC 3 : SPST-NO 6 : 16 (2) A at 250 VAC 6. Terminals 01 : 0.1 A at 125 VAC A : Solder terminals C2 : Quick-connect terminals (#187) 2. Contact Gap C : Quick-connect terminals (#250) None : 1 mm (F gap) 7. Maximum Operating Force G : 0.5 mm (G gap) 5 : 1.96 N {200 gf} 3. Actuator 4A : 1.23 N {125 gf} None : Pin plunger 4 : 0.98 N {100 gf} 1 : Short hinge lever 3 : 0.49 N {50 gf} 2 : Hinge lever 2 : 0.25 N {25 gf} 3 : Long hinge lever Note. These values are for the pin plunger models. 4 : Simulated roller lever 8. Mounting Hole Size 5 : Short hinge roller lever None : 3.1 mm 6 : Hinge roller lever K : 2.9 mm 4. Hinge Position 9. Special Code None : Standard None : Internal/Far from plunger H : High temperature (125°C) (See note) 8.1 E : Special rating: 21 (8) A Note. Consult your OMRON sales representative for high temperature models. K : External/Near plunger 14.3 1

D3V Miniature Basic Switch List of Models ●21 A (OF: 1.23 N {125 gf}) Terminals Quick-connect Maximum operating terminals (#250) Ratings Contact gap Actuators Contact form force (OF) (C) Pin plunger SPDT D3V-21G-1C4A SPDT-NC 1.23 N {125 gf} - SPDT-NO - Short hinge lever SPDT D3V-21G1-1C4A SPDT-NC 1.23 N {125 gf} - D 3 SPDT-NO - V Hinge lever SPDT D3V-21G2-1C4A SPDT-NC 0.78 N {80 gf} - SPDT-NO - Long hinge lever SPDT D3V-21G3-1C4A 0.5 mm 21 A SPDT-NC 0.44 N {45 gf} - (G gap) SPDT-NO - Simulated roller lever SPDT D3V-21G4-1C4A SPDT-NC 0.83 N {85 gf} - SPDT-NO - Short hinge roller lever SPDT D3V-21G5-1C4A SPDT-NC 1.42 N {145 gf} - SPDT-NO - Hinge roller lever SPDT D3V-21G6-1C4A SPDT-NC 0.79 N {80 gf} - SPDT-NO - Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. ●16 A (OF: 1.96 N {200 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-16-1A5 D3V-16-1C25 D3V-16-1C5 SPDT-NC 1.96 N {200 gf} D3V-16-2A5 D3V-16-2C25 D3V-16-2C5 SPDT-NO D3V-16-3A5 D3V-16-3C25 D3V-16-3C5 Short hinge lever SPDT D3V-161-1A5 D3V-161-1C25 D3V-161-1C5 SPDT-NC 1.96 N {200 gf} D3V-161-2A5 D3V-161-2C25 D3V-161-2C5 SPDT-NO D3V-161-3A5 D3V-161-3C25 D3V-161-3C5 Hinge lever SPDT D3V-162-1A5 D3V-162-1C25 D3V-162-1C5 SPDT-NC 1.23 N {125 gf} D3V-162-2A5 D3V-162-2C25 D3V-162-2C5 SPDT-NO D3V-162-3A5 D3V-162-3C25 D3V-162-3C5 Long hinge lever SPDT D3V-163-1A5 D3V-163-1C25 D3V-163-1C5 1 mm 16 A SPDT-NC 0.69 N {70 gf} D3V-163-2A5 D3V-163-2C25 D3V-163-2C5 (F gap) SPDT-NO D3V-163-3A5 D3V-163-3C25 D3V-163-3C5 Simulated roller lever SPDT D3V-164-1A5 D3V-164-1C25 D3V-164-1C5 SPDT-NC 1.23 N {125 gf} D3V-164-2A5 D3V-164-2C25 D3V-164-2C5 SPDT-NO D3V-164-3A5 D3V-164-3C25 D3V-164-3C5 Short hinge roller lever SPDT D3V-165-1A5 D3V-165-1C25 D3V-165-1C5 SPDT-NC 2.35 N {240 gf} D3V-165-2A5 D3V-165-2C25 D3V-165-2C5 SPDT-NO D3V-165-3A5 D3V-165-3C25 D3V-165-3C5 Hinge roller lever SPDT D3V-166-1A5 D3V-166-1C25 D3V-166-1C5 SPDT-NC 1.23 N {125 gf} D3V-166-2A5 D3V-166-2C25 D3V-166-2C5 SPDT-NO D3V-166-3A5 D3V-166-3C25 D3V-166-3C5 Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. 2

D3V Miniature Basic Switch ●11 A (OF: 1.96 N {200 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-11-1A5 D3V-11-1C25 D3V-11-1C5 SPDT-NC 1.96N {200 gf} - - - SPDT-NO - - - Short hinge lever SPDT D3V-111-1A5 D3V-111-1C25 D3V-111-1C5 SPDT-NC 1.96N {200 gf} - - - D SPDT-NO - - - 3 Hinge lever SPDT D3V-112-1A5 D3V-112-1C25 D3V-112-1C5 V SPDT-NC 1.23N {125 gf} - - - SPDT-NO - - - Long hinge lever SPDT D3V-113-1A5 D3V-113-1C25 D3V-113-1C5 1 mm 11 A SPDT-NC 0.69N {70 gf} - - - (F gap) SPDT-NO - - - Simulated roller lever SPDT D3V-114-1A5 D3V-114-1C25 D3V-114-1C5 SPDT-NC 1.23N {125 gf} - - - SPDT-NO - - - Short hinge roller lever SPDT D3V-115-1A5 D3V-115-1C25 D3V-115-1C5 SPDT-NC 2.35N {240 gf} - - - SPDT-NO - - - Hinge roller lever SPDT D3V-116-1A5 D3V-116-1C25 D3V-116-1C5 SPDT-NC 1.23N {125 gf} - - - SPDT-NO - - - Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. ●11 A (OF: 0.98 N {100 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-11-1A4 D3V-11-1C24 D3V-11-1C4 SPDT-NC 0.98N {100 gf} - - - SPDT-NO - - - Short hinge lever SPDT D3V-111-1A4 D3V-111-1C24 D3V-111-1C4 SPDT-NC 0.98N {100 gf} - - - SPDT-NO - - - Hinge lever SPDT D3V-112-1A4 D3V-112-1C24 D3V-112-1C4 SPDT-NC 0.59N {60 gf} - - - SPDT-NO - - - Long hinge lever SPDT D3V-113-1A4 D3V-113-1C24 D3V-113-1C4 1 mm 11 A SPDT-NC 0.34N {35 gf} - - - (F gap) SPDT-NO - - - Simulated roller lever SPDT D3V-114-1A4 D3V-114-1C24 D3V-114-1C4 SPDT-NC 0.59N {60 gf} - - - SPDT-NO - - - Short hinge roller lever SPDT D3V-115-1A4 D3V-115-1C24 D3V-115-1C4 SPDT-NC 1.18N {120 gf} - - - SPDT-NO - - - Hinge roller lever SPDT D3V-116-1A4 D3V-116-1C24 D3V-116-1C4 SPDT-NC 0.59N {60 gf} - - - SPDT-NO - - - Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. 3

D3V Miniature Basic Switch ●6 A (OF: 0.98 N {100 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-6-1A4 D3V-6-1C24 D3V-6-1C4 SPDT-NC 0.98 N {100 gf} - - - SPDT-NO - - - Short hinge lever SPDT D3V-61-1A4 D3V-61-1C24 D3V-61-1C4 SPDT-NC 0.98 N {100 gf} - - - D 3 SPDT-NO - - - V Hinge lever SPDT D3V-62-1A4 D3V-62-1C24 D3V-62-1C4 SPDT-NC 0.59 N {60 gf} - - - SPDT-NO - - - Long hinge lever SPDT D3V-63-1A4 D3V-63-1C24 D3V-63-1C4 1 mm 6 A SPDT-NC 0.34 N {35 gf} - - - (F gap) SPDT-NO - - - Simulated roller lever SPDT D3V-64-1A4 D3V-64-1C24 D3V-64-1C4 SPDT-NC 0.59 N {60 gf} - - - SPDT-NO - - - Short hinge roller lever SPDT D3V-65-1A4 D3V-65-1C24 D3V-65-1C4 SPDT-NC 1.18 N {120 gf} - - - SPDT-NO - - - Hinge roller lever SPDT D3V-66-1A4 D3V-66-1C24 D3V-66-1C4 SPDT-NC 0.59 N {60 gf} - - - SPDT-NO - - - ●6 A (OF: 0.49 N {50 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-6G-1A3 D3V-6G-1C23 D3V-6G-1C3 SPDT-NC 0.49 N {50 gf} - - - SPDT-NO - - - Short hinge lever SPDT D3V-6G1-1A3 D3V-6G1-1C23 D3V-6G1-1C3 SPDT-NC 0.49 N {50 gf} - - - SPDT-NO - - - Hinge lever SPDT D3V-6G2-1A3 D3V-6G2-1C23 D3V-6G2-1C3 SPDT-NC 0.59 N {60 gf} - - - SPDT-NO - - - Long hinge lever SPDT D3V-6G3-1A3 D3V-6G3-1C23 D3V-6G3-1C3 0.5 mm 6 A SPDT-NC 0.20 N {20 gf} - - - Ggap) SPDT-NO - - - Simulated roller lever SPDT D3V-6G4-1A3 D3V-6G4-1C23 D3V-6G4-1C3 SPDT-NC 0.29 N {30 gf} - - - SPDT-NO - - - Short hinge roller lever SPDT D3V-6G5-1A3 D3V-6G5-1C23 D3V-6G5-1C3 SPDT-NC 0.59 N {60 gf} - - - SPDT-NO - - - Hinge roller lever SPDT D3V-6G6-1A3 D3V-6G6-1C23 D3V-6G6-1C3 SPDT-NC 0.29 N {30 gf} - - - SPDT-NO - - - Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. 4

D3V Miniature Basic Switch ●0.1 A (OF: 0.49 N {50 gf}) Terminals Quick-connect Quick-connect Solder terminals Maximum operating terminals (#187) terminals (#250) (A) Ratings Contact gap Actuators Contact form force (OF) (C2) (C) Pin plunger SPDT D3V-01-1A3 D3V-01-1C23 D3V-01-1C3 SPDT-NC 0.49 N {50 gf} D3V-01-2A3 D3V-01-2C23 D3V-01-2C3 SPDT-NO D3V-01-3A3 D3V-01-3C23 D3V-01-3C3 Short hinge lever SPDT D3V-011-1A3 D3V-011-1C23 D3V-011-1C3 SPDT-NC 0.49 N {50 gf} D3V-011-2A3 D3V-011-2C23 D3V-011-2C3 D SPDT-NO D3V-011-3A3 D3V-011-3C23 D3V-011-3C3 3 Hinge lever SPDT D3V-012-1A3 D3V-012-1C23 D3V-012-1C3 V SPDT-NC 0.59 N {60 gf} D3V-012-2A3 D3V-012-2C23 D3V-012-2C3 SPDT-NO D3V-012-3A3 D3V-012-3C23 D3V-012-3C3 Long hinge lever SPDT D3V-013-1A3 D3V-013-1C23 D3V-013-1C3 1 mm 0.1 A SPDT-NC 0.20 N {20 gf} D3V-013-2A3 D3V-013-2C23 D3V-013-2C3 (F gap) SPDT-NO D3V-013-3A3 D3V-013-3C23 D3V-013-3C3 Simulated roller lever SPDT D3V-014-1A3 D3V-014-1C23 D3V-014-1C3 SPDT-NC 0.29 N {30 gf} D3V-014-2A3 D3V-014-2C23 D3V-014-2C3 SPDT-NO D3V-014-3A3 D3V-014-3C23 D3V-014-3C3 Short hinge roller lever SPDT D3V-015-1A3 D3V-015-1C23 D3V-015-1C3 SPDT-NC 0.59 N {60 gf} D3V-015-2A3 D3V-015-2C23 D3V-015-2C3 SPDT-NO D3V-015-3A3 D3V-015-3C23 D3V-015-3C3 Hinge roller lever SPDT D3V-016-1A3 D3V-016-1C23 D3V-016-1C3 SPDT-NC 0.29 N {30 gf} D3V-016-2A3 D3V-016-2C23 D3V-016-2C3 SPDT-NO D3V-016-3A3 D3V-016-3C23 D3V-016-3C3 Note.If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Contact Form ●SPDT ●SPST-NC ●SPST-NO NC NC NO NO COM COM COM Contact Specifications Item Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Specification Rivet Crossbar Contact Material Silver alloy Gold alloy Gap (standard value) 0.5 mm 1.0 mm (F gap) or 0.5 mm (G gap) 1.0 mm NC Inrush current 50 A max. 40 A max. 24 A max. 15 A max. --- NO Minimum applicable load (see note) 160 mA at 5 VDC 1 mA at 5 VDC Note.For more information on the minimum applicable load, refer to Using Micro Loads on page11. 5

D3V Miniature Basic Switch Ratings Item Resistive load Model Rated voltage 250 VAC 21 A D3V-21 125 VDC 0.6 A 250 VDC 0.3 A 250 VAC 16 A D3V-16 125 VDC 0.6 A 250 VDC 0.3 A D 250 VAC 11 A 3 V D3V-11 125 VDC 0.6 A 250 VDC 0.3 A 250 VAC 6 A D3V-6 125 VDC 0.4 A 250 VDC 0.3 A 125 VAC 0.1 A D3V-01 30 VDC 0.1 A Note 1.The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current values of models with a contact gap of 0.5 mm (gap G). Note 2.The ratings values apply under the following test conditions: Ambient temperature: 20±2°C Ambient humidity: 65±5% Operating frequency: 30 operations/min Approved Safety Standards Consult your OMRON sales representative for specific models with standard approvals. UL1054 (File No. E41515)/CSA C22.2 No.55 (File No. LR21642) Rated voltage Model D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01 125 VAC --- 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A 250 VAC 20.1 A 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP --- 125 VDC --- 0.6 A 0.1 A 0.6 A 0.1 A --- --- --- 250 VDC --- 0.3 A --- 0.3 A --- --- --- --- EN 61058-1: 1992+A1: 1993 (License No. 40024894) Rated voltage Model D3V-21G D3V-16 D3V-11 D3V-6 D3V-01 125 VAC --- --- --- --- 0.1 A 250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A --- Testing conditions: 5E4 (50,000 operations), T85 (0 to 85°C) for D3V-21/D3V-01, T105 (0 to 105°C) for D3V-16/D3V-11/D3V-6 Rated voltage Model D3V-21G 250 VAC 21 (8) A Testing conditions: 10,000 operations, T85 (0 to 85°C) 6

D3V Miniature Basic Switch Characteristics Item Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Permissible operating speed 0.1 mm to 1 m/s (pin plunger models) Mechanical: 600 operations/min max. Permissible operating frequency Electrical: 30 operations/min max. Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) 0.49N {50 gf}: 50 mΩ Contact resistance (initial values) 50 mΩ max. 30 mΩ max. 0.25N {25m gafx}:. 100 mΩ max. 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity D Dielectric strength (see note 2) 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non- 3 V current-carrying metal parts Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Destruction: 400 m/s2 {approx. 40 G} max. Shock resistance (see note 3) Malfunction: 100 m/s2 {approx. 10 G} max. Mechanical 10,000,000 operations min. Durability (see note 4) Electrical 50,000 operations min. 100,000 operations min. 200,000 operations min. 500,000 operations min. Degree of protection IEC IP40 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 –25 to +85°C –25 to +85°C (at ambient humidity –25 to +105°C (at ambient humidity of 60% max.) (at ambient humidity Ambient operating temperature of 60% max.) (with no (with no icing or condensation) of 60% max.) (with no icing or condensation) icing or condensation) Ambient operating humidity 85% max. (for +5 to +35°C) Weight Approx. 6.2 g (pin plunger models) Note 1.The data given above are initial values. Note 2.The dielectric strength values shown in the table are for models with a Separator. Note 3.For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel position. Note 4.For testing conditions, contact your OMRON sales representative. Terminals/Appearances (Unit: mm) Solder Terminals Quick-connect Terminals (#187) Quick-connect Terminals (#250) (A) (C2) (C) (4.9) (5.5) (5.5) (7.7) (6.5) (6.5) 2.9 3.2 2.9 (12.0) t = 0.5 (10) tT =h r0e.e5, qu(i1c0k)-connect t = 0.8 Three, solder terminals terminals (#187) Three, quick-connect terminals (#250) 6.35 8 3.2 (see note) 6.35 3.2 3.95 4.75±0.1 4.75±0.1 6.35±0.1 2.4 dia. 1.6 dia. Note: Indicates the length to the center of the 1.6-dia. terminal hole 1.6-dia. holes 1.65-dia. terminal hole Note.The table below is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For terminal positions, refer to Contact Form on page5. Mounting Holes (Unit: mm) Two, 3.1-dia. mounting holes or M3 screw holes 10.3±0.1 22.2±0.1 7

D3V Miniature Basic Switch Dimensions and Operating Characteristics (Unit: mm) The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer to "Terminals/Appearances" on page7 for these terminals. The @ in the model number is for the terminal code. ●Pin Plunger Models A D3V-21G-1C4A D3V-16-1@5 D3V-11-1@5 D3V-11-1@4 D3V-6-1@4 D D3V-6G-1@3 3 D3V-01-1@3 V t=0.5 Three, quick-connect terminals (#187) Model D3V-16-1@5 D3V-11-1@4 D3V-21G-1C4A D3V-6G-1@3 D3V-01-1@3 Operating Characteristics D3V-11-1@5 D3V-6-1@4 Operating Force OF Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.98 N {100 gf} 0.49 N {50 gf} Releasing Force RF Min. 0.20 N {20 gf} 0.49 N {50 gf} 0.15 N {15 gf} 0.05 N {5 gf} Pretravel PT Max. 1.2 mm 1.2 mm 1.2 mm 1.2 mm Overtravel OT Min. 1.0 mm 1.0 mm 1.0 mm 1.0 mm Movement Differential MD Max. 0.3 mm 0.4 mm 0.3 mm 0.4 mm Operating Position OP 14.7±0.4 mm ●Short Hinge Lever Models D3V-21G1-1C4A 3.1+− 00 .. 01 33 dia. hole 1.6 8.1 22.1t=0.5 A PT 2.85 4.2 D3V-161-1@5 0.7 D3V-111-1@5 4 2.8 D3V-111-1@4 18.715.97.2 10.3±0.1 OP D3V-61-1@4 D3V-6G1-1@3 3.4±0.15 dia. hole 3.1+−00..0133 D3V-011-1@3 tT=h0r.e5e, #187 series tab (120.)8 222.72.±80.1 10.3 37.8±0.8 Model D3V-161-1@5 D3V-111-1@4 D3V-21G1-1C4A D3V-6G1-1@3 D3V-011-1@3 Operating Characteristics D3V-111-1@5 D3V-61-1@4 Operating Force OF Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.98 N {100 gf} 0.49 N {50 gf} Releasing Force RF Min. 0.20 N {20 gf} 0.49 N {50 gf} 0.15 N {15 gf} 0.05 N {5 gf} Pretravel PT Max. 1.6 mm 1.6 mm 1.6 mm 1.6 mm Overtravel OT Min. 0.8 mm 0.8 mm 0.8 mm 0.8 mm Movement Differential MD Max. 0.5 mm 0.6 mm 0.5 mm 0.6 mm Operating Position OP 15.2±0.5 mm ●Hinge Lever Models A D3V-21G2-1C4A 35.6±0.8 2.85 4.2 D3V-162-1@5 3.1 +− 00 .. 01 33 dia. hole 1.6 t=0.5 PT D3V-112-1@5 8.1 0.7 D3V-112-1@4 4 2.8 D3V-62-1@4 15.97.2 10.3±0.1 OP 18.8 D3V-6G2-1@3 D3V-012-1@3 3.4±0.15 dia. hole 3.1+−00..0133 10.3 t=0.5 2.8 22.2±0.1 Three, #187 series tab (10) 27.8 37.8±0.8 Model D3V-162-1@5 D3V-112-1@4 D3V-21G2-1C4A D3V-6G2-1@3 D3V-012-1@3 Operating Characteristics D3V-112-1@5 D3V-62-1@4 Operating Force OF Max. 0.78 N {80 gf} 1.23 N {125 gf} 0.59 N {60 gf} 0.29 N {30 gf} Releasing Force RF Min. 0.06 N {6 gf} 0.14 N {14 gf} 0.06 N {6 gf} --- Pretravel PT Max. 4.0 mm 4.0 mm 4.0 mm 4.0 mm Overtravel OT Min. 1.6 mm 1.6 mm 1.6 mm 1.6 mm Movement Differential MD Max. 0.8 mm 1.5 mm 0.8 mm 1.5 mm Operating Position OP 15.2±1.2 mm Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 8

D3V Miniature Basic Switch ●Long Hinge Lever Models A DD33VV--2116G3-31-@1C54A 3.1+− 00 .. 01 33 dia. hole 1.6 5t9=.04.±50.8 PT 2.85 4.2 8.1 D3V-113-1@5 0.7 D3V-113-1@4 4 2.8 OP D3V-63-1@4 18.715.97.2 10.3±0.1 D3V-6G3-1@3 D3V-013-1@3 t=0.5 2.8 3.4±02.125.2 d±ia0. .h1ole 3.1+−00..0133 10.3 Three, #187 series tab (10) 27.8 37.8±0.8 D 3 Model D3V-21G3-1C4A D3V-163-1@5 D3V-113-1@4 D3V-6G3-1@3 D3V-013-1@3 V Operating Characteristics D3V-113-1@5 D3V-63-1@4 Operating Force OF Max. 0.44 N {45 gf} 0.69 N {70 gf} 0.34 N {35 gf} 0.20 N {20 gf} Releasing Force RF Min. 0.03 N {3 gf} 0.06 N {6 gf} --- --- Pretravel PT Max. 9.0 mm 9.0 mm 9.0 mm 9.0 mm Overtravel OT Min. 2.0 mm 2.0 mm 3.2 mm 3.2 mm Movement Differential MD Max. 2.0 mm 2.8 mm 2.0 mm 2.8 mm Operating Position OP 15.2 +− 32 .. 26 mm 15.2±2.6 mm ●Simulated Roller Lever Models A D3V-21G4-1C4A 32.5±0.8 2.85 4.2 D3V-164-1@5 3.1+− 00 .. 01 33 dia. hole 1.6 t=0.5 PT D3V-114-1@5 8.1 D3V-114-1@4 0.7 D3V-64-1@4 4 2.8 OP D3V-6G4-1@3 18.815.97.2 10.3±0.1 D3V-014-1@3 3.4±0.15 dia. hole 3.1+−00..0133 t=0.5 2.8 22.2±0.1 10.3 Three, #187 series tab (10) 27.8 37.8±0.8 Model D3V-164-1@5 D3V-114-1@4 D3V-21G4-1C4A D3V-6G4-1@3 D3V-014-1@3 Operating Characteristics D3V-114-1@5 D3V-64-1@4 Operating Force OF Max. 0.83 N {85 gf} 1.23 N {125 gf} 0.59 N {60 gf} 0.29 N {30 gf} Releasing Force RF Min. 0.07 N {7 gf} 0.14 N {14 gf} 0.06 N {6 gf} --- Pretravel PT Max. 4.0 mm 4.0 mm 4.0 mm 4.0 mm Overtravel OT Min. 1.6 mm 1.6 mm 1.6 mm 1.6 mm Movement Differential MD Max. 1.4 mm 1.5 mm 1.4 mm 1.5 mm Operating Position OP 18.7±1.2 mm ●Short Hinge Roller Lever Models A D3V-21G5-1C4A D3V-165-1@5 3.1+− 00 .. 01 33 dia. hole 1.6 20.1±0.8 PT 5.1 4.8 D3V-115-1@5 0.7 8.1 t=0.5 D3V-115-1@4 DD33VV--665G-51-@1@43 18.815.974.2 10.3±20..81OP D3V-015-1@3 3.4±0.15 dia. hole 3.1+−00..0133 t=0.5 2.8 22.2±0.1 10.3 Three, #187 series tab (10) 27.8 37.8±0.8 Model D3V-165-1@5 D3V-115-1@4 D3V-21G5-1C4A D3V-6G5-1@3 D3V-015-1@3 Operating Characteristics D3V-115-1@5 D3V-65-1@4 Operating Force OF Max. 1.42 N {145 gf} 2.35 N {240 gf} 1.18 N {120 gf} 0.59 N {60 gf} Releasing Force RF Min. 0.2 N {20 gf} 0.49 N {50 gf} 0.15 N {15 gf} 0.06 N {6 gf} Pretravel PT Max. 1.6 mm 1.6 mm 1.6 mm 1.6 mm Overtravel OT Min. 0.8 mm 0.8 mm 0.8 mm 0.8 mm Movement Differential MD Max. 0.5 mm 0.6 mm 0.5 mm 0.6 mm Operating Position OP 20.7±0.6 mm Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 9

D3V Miniature Basic Switch ●Hinge Roller Lever Models A D3V-21G6-1C4A D3V-166-1@5 33.0±0.8 PT 5.1 3.1+− 00 .. 01 33 dia. hole 1.6 4.8 D3V-116-1@5 t=0.5 8.1 D3V-116-1@4 0.7 D3V-66-1@4 4 2.8OP D3V-6G6-1@3 18.715.9 7.2 10.3±0.1 D3V-016-1@3 3.4±0.15 dia. hole 3.1+−00..0133 t=0.5 2.8 22.2±0.1 10.3 D Three, #187 series tab (10) 27.8 3 37.8±0.8 V Model D3V-166-1@5 D3V-116-1@4 D3V-21G6-1C4A D3V-6G6-1@3 D3V-016-1@3 Operating Characteristics D3V-116-1@5 D3V-66-1@4 Operating Force OF Max. 0.79 N {80 gf} 1.23 N {125 gf} 0.59 N {60 gf} 0.29 N {30 gf} Releasing Force RF Min. 0.05 N {5 gf} 0.14 N {14 gf} 0.06 N {6 gf} --- Pretravel PT Max. 4.0 mm 4.0 mm 4.0 mm 4.0 mm Overtravel OT Min. 1.6 mm 1.6 mm 1.6 mm 1.6 mm Movement Differential MD Max. 0.8 mm 1.5 mm 0.8 mm 1.5 mm Operating Position OP 20.7±1.2 mm Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 10

D3V Miniature Basic Switch Precautions ★Please refer to "Common Precautions" for correct use. Cautions ●Handling Be careful not to drop the switch. Doing so may cause damage to the switch's internal components because it is designed for a small load. Correct Use D ●Mounting ●Using Micro Loads 3 V Use two M3 mounting screws with an appropriate screwdriver to Using a model for ordinary loads to open or close the contact of mount the switch. Tighten the screws to a torque of 0.39 to 0.59 a micro load circuit may result faulty contact. Use models that N·m {4 to 6 kgf·cm}. operate in the following range. However, even when using micro load models within the operating range shown below, if inrush ●Mounting Direction current occurs when the contact is opened or closed, it may Mount lever-operated switches with a maximum operating force increase contact wear and so decrease durability. Therefore, of 0.49 N in a direction where the actuator weight will not be insert a contact protection circuit where necessary. applied to the switch. Since the switch is designed for a small The minimum applicable load is the N-level reference value. This load, its resetting force is small. Therefore, resetting failure may value indicates the malfunction reference level for the reliability occur if unnecessary load is applied to the switch. level of 60% (λ 60). The equation, λ 60 = 0.5 × 10-6/operations indicates that the estimated malfunction rate is less than ●Insulation Distance 1/2,000,000 operations with a reliability level of 60%. According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance V) between the terminal and mounting plate should be 1.9 mm. If e ( the insulation distance cannot be provided in the product ag incorporating the switch, either use a switch with insulation Volt barrier or use a Separator to ensure sufficient insulation distance. Operating range for Operating range general- for micro load load models models D3V-01 Inoperable range Current (mA) ●Solder Terminal Approval Conditions Soldering iron can be used. Soldering hook hole available. Soldering terminal types 1 and 2 are met. Actuator (Sold Separately) Various Actuators are available as shown on D3V/V/VX/D2MV/D2RV Common Accessories. Connector (Sold Separately) Refer to Terminal Connectors. 11

D3V Miniature Basic Switch D 3 V (cid:129) Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. (cid:129) Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No.B103-E1-05 0815(0207)(O) 12

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: D3V-16G2M1C25K D3V-11G2M1C25K D3V-11G4M1C25K D3V-16G4M1C25K D3V-16G21C25K D3V- 11G21C25K D3V-11G1C25K D3V-11G6M1C25K D3V-16G6M1C25K D3V-11G61C25K D3V-16G61C25K D3V- 16G41C25K D3V-11G41C25K D3V-16G2-3C25-K D3V-21G-1C4A-K D3V-11-2A5 D3V-16G-1C25 D3V-11-2C25 D3V-16G-3C25 D3V-16-1C5 D3V-16G-1C5 D3V-16G-3C5 D3V-21G-1C4A D3V-11-1A4 D3V-6-1C24 D3V-11G- 1C4 D3V-01-1C23 D3V-11G-1C23 D3V-11G-1C3 D3V-01-1C22 D3V-01-3C22 D3V-16-1A5-K D3V-11-1A5-K D3V-16G-1A5-K D3V-11G-1A5-K D3V-11-2A5-K D3V-16G-2A5-K D3V-11G-2A5-K D3V-16G-3A5-K D3V-11G-3A5- K D3V-16-1C25-K D3V-16G-2C25-K D3V-11G-2C25-K D3V-16G-3C25-K D3V-11G-3C25-K D3V-11G-1C5-K D3V- 16G-2C5-K D3V-16G-3C5-K D3V-16G-1C4A-K D3V-21G-2C4A-K D3V-21G-3C4A-K D3V-6-1A4-K D3V-01-1A4-K D3V-11G-1A4-K D3V-6G-1A4-K D3V-11G-2A4-K D3V-6G-2A4-K D3V-11G-3A4-K D3V-6G-3A4-K D3V-16-1C24-K D3V-11-1C24-K D3V-6-1C24-K D3V-16G-1C24-K D3V-11G-1C24-K D3V-6G-1C24-K D3V-11G-2C24-K D3V-6G- 2C24-K D3V-11-3C24-K D3V-11G-3C24-K D3V-6G-3C24-K D3V-11G-1C4-K D3V-6G-1C4-K D3V-11G-2C4-K D3V-6-3C4-K D3V-16G-3C4-K D3V-6G-3C4-K D3V-01-1A3-K D3V-01-1C23-K D3V-11G-1C23-K D3V-6G-1C23-K D3V-6G-2C23-K D3V-01-3C23-K D3V-6G-1C3-K D3V-01G-2C3-K D3V-6G-3C3-K D3V-01-1C22-K D3V-16G-1C25- K-H D3V-16-1C5-K-H D3V-11G-1C24-K-H D3V-01-3C23-T D3V-112-1C24 D3V-114-1C4 D3V-11G1-1C24-K D3V- 11G1-1C25-K D3V-11G1M-1A4-K D3V-11G1M-1A5-K D3V-11G1M-1C24-K D3V-11G1M-1C25-K D3V-11G1M-2A4- K D3V-11G1M-2A5-K