D3M Subminiature Basic Switch Quick-connect Terminals Simplify Wiring and Reduce Production Steps ●Easy wiring is ensured by quick-connect terminals, and horizontal layout of terminals (cid:14832) saves mounting space. 3 ●External actuator mounts in either of two M directions to increase Switch mounting flexibility. ●Same mounting pitch as the OMRON SS Subminiature Basic Switch. RoHS Compliant Model Number Legend @ @ @ D3M-01 1 2 3 1. Lever mounting position 2. Actuator None : without lever None : Pin plunger K : Lever set close to plunger 1 : Hinge lever 2 : Hinge roller lever 3 : Simulated roller lever 3. Contact form L : Lever set distant from plunger None : SPST-NC (Color of plunger: Red) -3 : SPST-NO (Color of plunger: Black) List of Models Contact Specifications (Contact your dealer for detailed delivery date.) Lever Mounting Contact Specification Crossbar Actuator Model Position Form Contact Material Gold alloy SPST-NC D3M-01 Pin plunger - Gap (standard value) 0.5 mm SPST-NO D3M-01-3 Inrush current 1 A max. SPST-NC D3M-01K1 K Minimum applicable load (reference value)* 5 VDC 1 mA SPST-NO D3M-01K1-3 Hinge lever * Please refer to "●Using Micro Loads" in "Precautions" for more SPST-NC D3M-01L1 information on the minimum applicable load. L SPST-NO D3M-01L1-3 Ratings SPST-NC D3M-01K2 K Hinge roller SPST-NO D3M-01K2-3 Rated voltage Resistive load lever SPST-NC D3M-01L2 L 30 VDC 0.1 A SPST-NO D3M-01L2-3 Note.The above rating values apply under the following test conditions. K SPST-NC D3M-01K3 (1) Ambient temperature: 20±2°C Simulated SPST-NO D3M-01K3-3 (2) Ambient humidity: 65±5% roller lever SPST-NC D3M-01L3 (3) Operating frequency: 30 operations/min L SPST-NO D3M-01L3-3 Approved Safety Standards Contact Form UL (UL1054)/CSA (CSA C22.2 No.55) Rated voltage Model D3M ●SPST-NC ●SPST-NO 30 VDC 0.1 A NC NO TÜV (EN61058-1) COM COM Rated voltage Model D3M 30 VDC 0.1 A Testing conditions: 1E5 (100,000 operations) T55 (0°C to 55°C) 1

D3M Subminiature Basic Switch Characteristics Mounting Holes (Unit: mm) Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) 2-2.4 dia. mounting holes Permissible Mechanical 400 operations/min or M2.3 screw holes operating frequency Electrical 60 operations/min Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) 9.5±0.1 Contact resistance (initial value) *1 100 mΩ max. Between terminals of the 1,000 VAC 50/60 Hz for 1 min same polarity Between current-carrying (cid:14832) Dielectric 1,500 VAC 50/60 Hz for 1 min metal parts and ground 3 strength Between each terminals M and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude resistance *2 Shock Durability 1,000m/s2 {approx. 100G} max. resistance Malfunction *2 300 m/s2 {approx. 30G} max. Mechanical 500,000 operations min. (60 operations/min) Durability *3 Electrical 200,000 operations min. (30 operations/min) Degree of protection IEC IP40 -25°C to +85°C at ambient humidity of 60% max. Ambient operating temperature (with no icing or condensation) Ambient operating humidity 80% max. (for +5°C to +35°C) Weight Approx. 2g (pin plunger models) Note.The data given above are initial values. *1. Includes the resistance of the connector and lead wire (AWG #28, 50 mm length). *2. The values are Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. Dimensions and Operating Characteristics (Unit: mm) ●Pin Plunger D3M-01 Models D3M-01 （7.2） D3M-01-3 Operating Characteristics D3M-01-3 Operating Force OF Max. 1.50 N {153 gf} Releasing Force RF Min. 0.25 N {25 gf} Pretravel PT Max. 0.6 mm A Overtravel OT Min. 0.4 mm Movement Differential MDMax. 0.1 mm 3.5 7.6 Operating Position OP 8.4±0.3 mm FFFrrreeeeee 2.5 2.35+-00..105 7.7 OOOpppeeerrraaatttiiinnngggPPPooosssiiitttiiiooonnn 10PPPooosssiiitttiiiooonnn 7 2.5 dia. 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 （31.6） Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). Note 3.The terminals connect to JST's Dipole XA Connector. 2

D3M Subminiature Basic Switch ●Hinge Lever (K position) D3M-01K1 Models D3M-01K1 （7.2） D3M-01K1-3 Operating Characteristics D3M-01K1-3 Operating Force OF Max. 0.50 N {51 gf} t=0.3 Stainless-steel lever Releasing Force RF Min. 0.06 N {6 gf} 18.2 Overtravel OT Min. 1.2 mm 3.6 A 12.9 Movement Differential MD Max. 0.8 mm Free Position FP Max. 14.0 mm Operating Position OP 10.0±0.8 mm FFFrrreeeeee PPPooosssiiitttiiiooonnn 2.5 2.35+-00..105 7.7 10OOPPOPooopppssseeeiiirrrtttaaiiaioootttnnniiinnn ggg (cid:14832) 3 7 2.5 dia. M 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 （31.6） ●Hinge Lever (L position) D3M-01L1 Models D3M-01L1 (cid:15910)7.2(cid:15911) D3M-01L1-3 Operating Characteristics D3M-01L1-3 Operating Force OF Max. 1.00 N {102 gf} t=0.3 Stainless-steel lever Releasing Force RF Min. 0.10 N {10 gf} Overtravel OT Min. 0.7 mm 18.2 Movement Differential MDMax. 0.6 mm A 3.6 2.4 Free Position FP Max. 11.5 mm Operating Position OP 9.2±0.6 mm FFFrrreeeeee PPPooosssiiitttiiiooonnn 2.5 2.35+-00..105 7.7 10OOPPOPooopppssseeeiiirrrtttiiiaaaoootttnnniiinnn ggg 7 2.5 dia. 2.35+-00..015 dia. 9.5±0.1 5.7 29.2 (31.6) ●Hinge Roller Lever (K position) （7.2） 3.8 Models D3M-01K2 D3M-01K2 Operating Characteristics D3M-01K2-3 D3M-01K2-3 4.8×3.2 dia. t=0.3 Stainless-steel lever Operating Force OF Max. 0.50 N {51 gf} Polyacetal resin rollerA Releasing Force RF Min. 0.06 N {6 gf} 17.9 Overtravel OT Min. 1.2 mm Movement Differential MDMax. 0.8 mm 12.9 Free Position FP Max. 19.7 mm FFFrrreeeeee Operating Position OP 15.7±0.8 mm PPPooosssiiitttiiiooonnn OOOpppeeerrraaatttiiinnnggg 2.5 2.35+-00..1057.7 10PPPooosssiiitttiiiooonnn 7 2.5 dia. 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 （31.6） ●Hinge Roller Lever 3.8 (L position) Models D3M-01L2 D3M-01L2 （7.2） Operating Characteristics D3M-01L2-3 D3M-01L2-3 Operating Force OF Max. 1.00N {102 gf} t=0.3 Stainless-steel lever 4.8×3.2 dia. Releasing Force RF Min. 0.10N {10 gf} 17.9 A Polyacetal resin roller Overtravel OT Min. 0.7mm Movement Differential MDMax. 0.6mm 2.4 Free Position FP Max. 17.2 mm FFFrrreeeeee Operating Position OP 14.9±0.6 mm PPPooosssiiitttiiiooonnn OOOpppeeerrraaatttiiinnnggg 2.5 2.35+-00..105 7.7 PPPooosssiiitttiiiooonnn 10 7 2.5 dia. 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 （31.6） Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). Note 3.The terminals connect to JST's Dipole XA Connector. 3

D3M Subminiature Basic Switch ●Simulated Roller Lever (K position) (cid:15910)7.2(cid:15911) Models D3M-01K3 D3M-01K3 Operating Characteristics D3M-01K3-3 D3M-01K3-3 t=0.3 Stainless-steel lever Operating Force OF Max. 0.50 N {51 gf} 19.2 Releasing Force RF Min. 0.06 N {6 gf} R1.3 Overtravel OT Min. 1.2 mm 3.6 A 12.9 Movement Differential MDMax. 0.8 mm Free Position FP Max. 16.2 mm FFFrrreeeeee Operating Position OP 12.2±0.8 mm PPPooosssiiitttiiiooonnn OOOpppeeerrraaatttiiinnnggg 2.5 2.35+-00..105 7.7 10PPPooosssiiitttiiiooonnn (cid:14832) 3 M 7 2.5 dia. 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 (31.6) ●Simulated Roller Lever (L position) (cid:15910)7.2(cid:15911) Models D3M-01L3 D3M-01L3 Operating Characteristics D3M-01L3-3 D3M-01L3-3 t=0.3 Stainless-steel lever Operating Force OF Max. 1.00N {102 gf} Releasing Force RF Min. 0.10N {10 gf} 19.2 R1.3 Overtravel OT Min. 0.7 mm A Movement Differential MDMax. 0.6 mm 2.4 Free Position FP Max. 13.6 mm FFFrrreeeeee Operating Position OP 11.3±0.6 mm PPPooosssiiitttiiiooonnn 2.5 2.35+-00..105 7.7 10OOPPOPooopppssseeeiiirrrtttaaiiaioootttnnniiinnn ggg 7 2.5 dia. 2.35+-00..10 5 dia. 9.5±0.1 5.7 29.2 (31.6) Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). Note 3.The terminals connect to JST's Dipole XA Connector. Precautions ★Please refer to "Common Precautions" for correct use. wear and so decrease durability. Therefore, insert a contact Correct Use protection circuit where necessary. ●Mounting The N-level reference V) Use M2.3 mounting screw with plane washers or spring washers value applies for the e ( to securely mount the Switch. minimum applicable Voltag30 0.16 mA 100 mA Tighten the screws to a torque of 0.23 to 0.26 N·m {2.3 to load. This value 2.7kgf·cm}. indicates the 24 ●Wiring malfunction reference Operating range Do not use the Switch with Connector mounted and weight load level for the reliability applied to the Connector and lead wire, otherwise it may rattle or level of 60% (λ60). (JIS 12 may result in connection failure. C5003) ●Using Micro Loads The equation, 5 Using a model for ordinary loads to open or close the contact of λ60=0.5×10-6/operation 1 mA 100 mA a micro load circuit may result in faulty contact. It is 0 indicates that the 0.1 1 10 100 1,000 recommended to use the Switch in the operation range shown in Current (mA) estimated malfunction the diagram. However, even when using micro load models 1 rate is less than operations with a reliability level of within the operating range shown below, if inrush current occurs 2,000,000 60%. This indicates that it is considered malfunction. when the contact is opened or closed, it may increase contact Connector •The terminals connect to JST’s XA Connector. J.S.T. Manufacturing Co., Ltd. Contact: SXA-001T-P0.6 http://www.jst-mfg.com/index_e.php Housing: XAP-02V-1 •OMRON does not sell the XA Connector. •Contact JST Mfg. for more information on the connectors. 4

D3M Subminiature Basic Switch (cid:14832) 3 M (cid:129) Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. (cid:129) Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No.B100-E1-04 0812(0207)(O) 5