D2VW Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) ●Use of epoxy resin assures stable sealing, making D 2 this switch ideal for places subject to water spray V W or excessive dust. ●V-series internal mechanism assures high precision and durability. The mounting is the same as of the V models. ●Ideal for automobiles, agricultural machines, large-scale home appliances, and industrial equipment, which require high environmental resistance. RoHS Compliant Model Number Legend @ @ @ @ @ D2VW- 1 2 3 4 5 1. Ratings 4. Terminals 5 : 250 VAC 5 A None, HS : Solder terminals M, MS : Molded lead wires 01 : 30 VDC 0.1 A Note: UL/CSA approved versions are available. 2. Actuator In this case, HS, MS will be added to the end of the model numbe None : Pin plunger UL/CSA approved models have UL approved wiring (AWG20 UL1015). L1A : Short hinge lever Consult your OMRON sales representative for details. L1 : Hinge lever 5. Length of the molded lead wire L1B : Long hinge lever None : 300 mm L2A : Short hinge roller lever -0 : 1,000 mm L2 : Hinge roller lever L3 : Simulated roller hinge lever 3. Contact form -1 : SPDT -2 : SPST-NC -3 : SPST-NO 1

D2VW Sealed Miniature Basic Switch List of Models Ratings 5 A 0.1 A Actuator Terminals Contact form SPDT D2VW-5-1 D2VW-01-1 Solder terminals SPST-NC D2VW-5-2 D2VW-01-2 SPST-NO D2VW-5-3 D2VW-01-3 Pin plunger SPDT D2VW-5-1M D2VW-01-1M Molded lead wires (300 mm) SPST-NC D2VW-5-2M D2VW-01-2M SPST-NO D2VW-5-3M D2VW-01-3M D Molded lead wires (1,000 mm) SPDT D2VW-5-1M-0 D2VW-01-1M-0 2 V SPDT D2VW-5L1A-1 D2VW-01L1A-1 W Solder terminals SPST-NC D2VW-5L1A-2 D2VW-01L1A-2 SPST-NO D2VW-5L1A-3 D2VW-01L1A-3 Short hinge lever SPDT D2VW-5L1A-1M D2VW-01L1A-1M Molded lead wires (300 mm) SPST-NC D2VW-5L1A-2M D2VW-01L1A-2M SPST-NO D2VW-5L1A-3M D2VW-01L1A-3M Molded lead wires (1,000 mm) SPDT D2VW-5L1A-1M-0 D2VW-01L1A-1M-0 SPDT D2VW-5L1-1 D2VW-01L1-1 Solder terminals SPST-NC D2VW-5L1-2 D2VW-01L1-2 SPST-NO D2VW-5L1-3 D2VW-01L1-3 Hinge lever SPDT D2VW-5L1-1M D2VW-01L1-1M Molded lead wires (300 mm) SPST-NC D2VW-5L1-2M D2VW-01L1-2M SPST-NO D2VW-5L1-3M D2VW-01L1-3M Molded lead wires (1,000 mm) SPDT D2VW-5L1-1M-0 D2VW-01L1-1M-0 SPDT D2VW-5L1B-1 D2VW-01L1B-1 Solder terminals SPST-NC D2VW-5L1B-2 D2VW-01L1B-2 SPST-NO D2VW-5L1B-3 D2VW-01L1B-3 Long hinge lever SPDT D2VW-5L1B-1M D2VW-01L1B-1M Molded lead wires (300 mm) SPST-NC D2VW-5L1B-2M D2VW-01L1B-2M SPST-NO D2VW-5L1B-3M D2VW-01L1B-3M Molded lead wires (1,000 mm) SPDT D2VW-5L1B-1M-0 D2VW-01L1B-1M-0 SPDT D2VW-5L2A-1 D2VW-01L2A-1 Solder terminals SPST-NC D2VW-5L2A-2 D2VW-01L2A-2 SPST-NO D2VW-5L2A-3 D2VW-01L2A-3 Short hinge roller lever SPDT D2VW-5L2A-1M D2VW-01L2A-1M Molded lead wires (300 mm) SPST-NC D2VW-5L2A-2M D2VW-01L2A-2M SPST-NO D2VW-5L2A-3M D2VW-01L2A-3M Molded lead wires (1,000 mm) SPDT D2VW-5L2A-1M-0 D2VW-01L2A-1M-0 SPDT D2VW-5L2-1 D2VW-01L2-1 Solder terminals SPST-NC D2VW-5L2-2 D2VW-01L2-2 SPST-NO D2VW-5L2-3 D2VW-01L2-3 Hinge roller lever SPDT D2VW-5L2-1M D2VW-01L2-1M Molded lead wires (300 mm) SPST-NC D2VW-5L2-2M D2VW-01L2-2M SPST-NO D2VW-5L2-3M D2VW-01L2-3M Molded lead wires (1,000 mm) SPDT D2VW-5L2-1M-0 D2VW-01L2-1M-0 SPDT D2VW-5L3-1 D2VW-01L3-1 Solder terminals SPST-NC D2VW-5L3-2 D2VW-01L3-2 SPST-NO D2VW-5L3-3 D2VW-01L3-3 Simulated roller hinge SPDT D2VW-5L3-1M D2VW-01L3-1M lever Molded lead wires (300 mm) SPST-NC D2VW-5L3-2M D2VW-01L3-2M SPST-NO D2VW-5L3-3M D2VW-01L3-3M Molded lead wires (1,000 mm) SPDT D2VW-5L3-1M-0 D2VW-01L3-1M-0 Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories" 2

D2VW Sealed Miniature Basic Switch ●Safety Standard Approved Models Ratings 5A 0.1A Actuator Terminals Contact form Solder terminals D2VW-5-1HS D2VW-01-1HS Pin plunger Molded lead wires (300 mm) D2VW-5-1MS D2VW-01-1MS Solder terminals D2VW-5L1A-1HS D2VW-01L1A-1HS Short hinge lever Molded lead wires (300 mm) D2VW-5L1A-1MS D2VW-01L1A-1MS Solder terminals D2VW-5L1-1HS D2VW-01L1-1HS Hinge lever Molded lead wires (300 mm) D2VW-5L1-1MS D2VW-01L1-1MS D 2 Solder terminals D2VW-5L1B-1HS D2VW-01L1B-1HS Long hinge lever SPDT V Molded lead wires (300 mm) D2VW-5L1B-1MS D2VW-01L1B-1MS W Solder terminals D2VW-5L2A-1HS D2VW-01L2A-1HS Short hinge roller lever Molded lead wires (300 mm) D2VW-5L2A-1MS D2VW-01L2A-1MS Solder terminals D2VW-5L2-1HS D2VW-01L2-1HS Hinge roller lever Molded lead wires (300 mm) D2VW-5L2-1MS D2VW-01L2-1MS Solder terminals D2VW-5L3-1HS D2VW-01L3-1HS Simulated roller lever Molded lead wires (300 mm) D2VW-5L3-1MS D2VW-01L3-1MS Contact Form ●SPDT ●SPST-NC ●SPST-NO NC (Red) NC (Red) NO (Blue) NO (Blue) COM (Black) COM (Black) COM (Black) The color in parentheses indicates the color of the lead wire. Contact Specifications Approved Safety Standards UL (UL1054)/CSA (CSA C22.2 No.55) Item Model D2VW-5 models D2VW-01 models The terminal specification for models with UL/CSA safety Specification Rivet Crossbar standard certification is “HS” or “MS.” Contact Material Silver alloy Gold alloy Gap (standard value) 0.5 mm Rated voltage Model D2VW-5 D2VW-01 Inrush NC 15A max. - 125 VAC 3 A 0.1 A 250 VAC 3 A - current NO 15A max. - 30 VDC - 0.1 A Minimum applicable load 5 VDC 160 mA 5 VDC 1 mA (reference value) * VDE (EN61058-1) * Please refer to "Using Micro Loads" in "●Precautions" for more The models in the List of Models on the previous page are not information on the minimum applicable load. certified for VDE standards. Ratings Contact your OMRON representative if you require certified models. Item Rated voltage Model D2VW-5 D2VW-01 Resistive load Model Rated voltage 125 VAC - 0.1 A 250 VAC 5 A 250 VAC 3 A - D2VW-5 models 125 VAC 5 A Testing conditions: D2VW-5 25E3 (25,000 operations) 30 VDC 5 A T55 (0 to 55°C) 125 VAC 0.1 A D2VW-01 models D2VW-01 1E5 (100,000 operations) 30 VDC 0.1 A T85 (0 to 85°C) Note.The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Micro Switch Common Accessories" 3

D2VW Sealed Miniature Basic Switch Characteristics Mounting Holes (Unit: mm) Item Model D2VW-5 models D2VW-01 models 2-3.1 dia. mounting holes or M3 screw holes Permissible operating speed 0.1mm to 1m/s (for pin plunger models) Permissible Mechanical 300 operations/min operating frequency Electrical 60 operations/min 10.3±0.1 Insulation resistance 100 MΩ min. (500 VDC with insulation tester) Terminal models 50 mΩ max. 22.2±0.1 Contact Molded lead wire 100 mΩ max. resistance terminals (300mm) (initial value) Molded lead wire 200 mΩ max. D terminals (1,000mm) 2 Between terminals of the V same polarity 1,000 VAC 50/60 Hz for 1 min W Between current-carrying Dielectric 1,500 VAC 50/60 Hz for 1 min metal parts and ground strength *1 Between terminals and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude resistance *2 Shock Destruction 1,000m/s2 {approx. 100G} max. resistance Malfunction *2 300m/s2 {approx. 30G} max. Mechanical 10,000,000 operations min. (60 operations/min) Durability *3 100,000 operations min. 1,000,000 operations min. Electrical (30 operations/min) (30 operations/min) Degree of Terminal models IEC IP67 (excluding the terminals on terminal models) protection Molded lead wire models IEC IP67 Degree of protection against electric Class l shock Proof tracking index (PTI) 175 –40°C to +85°C (at ambient humidity of 60% max.) Ambient operating temperature (with no icing or condensation) Ambient operating humidity 95% max. (for +5°C to +35°C) Weight Approx. 7 g (for pin plunger models with terminals) Note.The data given above are initial values. *1. The dielectric strength shown in the table indicates the value for models with a Separator (refer to "Basic Switch Common Accessories"). *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. Dimensions and Operating Characteristics (Unit: mm) The illustrations and dimensions are for pin plunger models. Models with solder terminals Dimensions and operation characteristics of other actuator models are the same as those of molded lead wires models. ●Pin Plunger Models 2.4 dia. holes 1.3 dia. holes D2VW-5-1 D2VW-01-1 10.3 4.75 Operating Force OF Max. 1.96 N {200 gf} Releasing Force RF Min. 0.29 N {30 gf} 1.2 Pretravel PT Max. 1.2 mm 5.2 Overtravel OT Min. 1.0 mm 8.4 Movement Differential MD Max. 0.4 mm 20.2±0.25 Operating Position OP 14.7±0.4 mm PT 2.8 A 2.5 dia. 3.1+-00..0133 dia. holes 0.5 2.5 OP 5.2 15.910.3±0.1 5.2 3.1+-00..0133 3.2±0.1 dia. 2.8 22.2±0.1 t0.5 33 3-Solder terminals Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 4

D2VW Sealed Miniature Basic Switch The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted. Models with molded lead wires ●Pin Plunger Models AV0.75f molded lead wire (red)* D2VW-5-1M 20.2±0.25 D2VW-5-1M-0 PT 2.8 A 2.5 dia. 3.1+-00..1033 dia. holes AAVV00..7755ff mmooldldeedd leleaadd wwiriree ((bblulaec)k*)* D2VW-01-1M Operating Force OF Max. 1.96 N {200 gf} D2VW-01-1M-0 OP Releasing Force RF Min. 0.29 N {30 gf} 15.910.3±0.1 Pretravel PT Max. 1.2 mm Overtravel OT Min. 1.0 mm 3.1+-00..20133.8 32.22±.20.±10 d.1ia. (5) 10.3 MOpoeveramtienngt PDoisffietiroenn tial OMPD Max. 14.07.±40 m.4m m m D 2 33 L V Dimensions * UL/CSA approved models have UL W approved wiring (AWG20 UL1015). 300 mm type 1,000 mm type L 300±10 1,000±30 ●Short Hinge Lever Models D2VW-5L1A-1M D2VW-5L1A-1M-0 PT A 2t4=.03.±50*.8 5 4.3 ORepleeraastiinngg FFoorrccee ROFF MMianx. . 10..9260 NN { {22000 ggff}} D2VW-01L1A-1M Pretravel PT Max. 1.6 mm D2VW-01L1A-1M-0 OP Overtravel OT Min. 0.8 mm 15.9 Movement Differential MD Max. 0.5 mm Operating Position OP 15.2±0.5 mm * Stainless-steel lever 10.3 ●Hinge Lever Models D2VW-5L1-1M D2VW-5L1-1M-0 PT A 35.6±0.8 5 4.3 Operating Force OF Max. 1.18 N {120 gf} t=0.5* Releasing Force RF Min. 0.15 N {15 gf} D2VW-01L1-1M Pretravel PT Max. 4.0 mm D2VW-01L1-1M-0 OP Overtravel OT Min. 1.6 mm 15.9 Movement Differential MD Max. 0.8 mm Operating Position OP 15.2±1.2 mm * Stainless-steel lever 10.3 ●Long Hinge Lever Models D2VW-5L1B-1M D2VW-5L1B-1M-0 PT A 59.4±0.8 5 4.3 Operating Force OF Max. 0.59 N {60 gf} t=0.5* Releasing Force RF Min. 0.05 N {5 gf} D2VW-01L1B-1M Pretravel PT Max. 9.0 mm D2VW-01L1B-1M-0 Overtravel OT Min. 3.2 mm OP 15.9 Movement Differential MD Max. 2.0 mm Operating Position OP 15.2±2.6 mm * Stainless-steel lever 10.3 ●Simulated Roller Lever Hinge Models D2VW-5L3-1M D2VW-5L3-1M-0 PT A 32.6±0.8 5 Operating Force OF Max. 1.18N {120 gf} R3.5 4.3 Releasing Force RF Min. 0.15N {15 gf} D2VW-01L3-1M t=0.5* Pretravel PT Max. 4.0 mm D2VW-01L3-1M-0 Overtravel OT Min. 1.6 mm OP Movement Differential MD Max. 0.8 mm 15.9 Operating Position OP 18.7±1.2 mm * Stainless-steel lever 10.3 Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 5

D2VW Sealed Miniature Basic Switch Models with molded lead wires ●Short Hinge Roller Lever Models D2VW-5L2A-1M D2VW-5L2A-1M-0 24.3±0.8 *2 D2VW-01L2A-1M PT 4.8×4.8 dia. A20.1±0.8 5 7.2 ORepleeraastiinngg FFoorrccee ROFF MMianx.. 20.2.250 NN {{22300 g gf}f} D2VW-01L2A-1M-0 *1 t=0.5 Pretravel PT Max. 1.6 mm Overtravel OT Min. 0.8 mm OP Movement Differential MD Max. 0.5 mm D 15.9 Operating Position OP 20.7±0.6 mm 2 V W *1. Stainless-steel lever 10.3 *2. Polyacetal resin roller ●Hinge roller lever D2VW-5L2-1M DD22VVWW--50L1L2-21-M1M-0 PT A 4.8×4.8 3*42± d0.i8a. 5 7.2 ORepleeraastiinngg FFoorrccee ORFF MMainx.. 10..1185 NN {{11250 g gf}f} t=0.5 *1 Pretravel PT Max. 4.0 mm D2VW-01L2-1M-0 Overtravel OT Min. 1.6 mm Movement Differential MD Max. 0.8 mm OP Operating Position OP 20.7±1.2 mm 15.9 *1. Stainless-steel lever 10.3 *2. Polyacetal resin roller Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 6

D2VW Sealed Miniature Basic Switch Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use ●Degree of Protection ●Mounting Do not use the Switch underwater. Use M3 mounting screw with plane washers or spring washers to The Switch was tested and found to meet the conditions securely mount the Switch. Tighten the screws to a torque of necessary to meet the following standard, however, the test 0.39 to 0.59 N·m {4 to 6 kgf·cm}. checks for water intrusion after immersion for a specified time ●Operating Body period, not for switching operation underwater. D With the pin plunger models, set 2 JIS C0920: the Switch so that the plunger can V Degrees of protection provided by enclosures of electrical W be pushed in from directly above. apparatus (IP Code) Since the plunger is covered with IEC 60529: a rubber cap, applying a force Degrees of protection provided by enclosures (IP Code) from lateral directions may cause Degree of protection: IP67 damage to the plunger or (check water intrusion after immersion reduction in the sealing capability. for 30 min submerged 1 m underwater) ●Handling ●Protection Against Chemicals Handle the Switch carefully so as not to break the sealing Prevent the Switch from coming into contact with oil or rubber. chemicals. Otherwise, damage to or deterioration of Switch materials may ●Using Micro Loads result. Using a model for ordinary loads to open or close the contact of ●Soldering a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro •Connecting to Solder Terminals load models within the following operating range, if inrush When soldering the lead wire to the terminal, first insert the current occurs when the contact is opened or closed, it may lead wire conductor through the terminal hole and then increase the contact wear and so decrease durability. Therefore, conduct soldering. insert a contact protection circuit where necessary. The N-level Complete the soldering at the iron tip temperature between reference value applies for the minimum applicable load. This 350 to 400°C within 5 seconds, and do not apply any external value indicates the malfunction reference level for the reliability force for 1 minute after soldering. Soldering at a excessively level of 60% (λ60). high temperature or soldering for more than 5 s may (JIS C5003) deteriorate the characteristics of the Switch. The equation, λ60=0.5×10-6/operations indicates that the 1 estimated malfunction rate is less than operations 2,000,000 with a reliability level of 60%. V) e ( oltag30 0.16 mA 26 mA100 mA V 24 Operating range for Operating range for general-load micro load models models D2VW-01 D2VW-5 12 5 1 mA 100mA 160 mA 0 0.1 1 10 100 1,000 Current (mA) 7

D2VW Sealed Miniature Basic Switch D 2 V W (cid:129) Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. (cid:129) Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. C095-E1-07 0417(0207)(O) 8

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: D2VW-01L1-1HS D2VW-01L2-1MS D2VW-01-1HS D2VW-5L1A-1MS D2VW-5L1-1HS D2VW-5L2-1MS D2VW-5- 1HS D2VW-01L2-1HS D2VW-01L1-1MS D2VW-5L3-1HS D2VW-01L3-1HS D2VW-5L1-1MS D2VW-5-1MS D2VW- 5L1B-1MS D2VW-01-1MS D2VW-5L2A-1HS D2VW-5L2A-1MS D2VW-01L1A-1HS D2VW-01L1A-1MS D2VW- 01L1B-1HS D2VW-01L1B-1MS D2VW-01L3-1MS D2VW-01L2A-1HS D2VW-5L1A-1HS D2VW-5L1B-1HS D2VW- 01L02A-1HS D2VW-01L02A-1MS D2VW-01L1A-1 D2VW-01L1A-1M D2VW-01L3-1M D2VW-01L3-3HS D2VW-5- 1M D2VW-5-2MS D2VW-5-3 D2VW-5-3MS D2VW-5K3-1MS D2VW-5L1-3HS D2VW-5L1-3MS D2VW-5L2-3MS D2VW-5L2A-2MS D2VW-5L2A-3MS D2VW-01L2A-1MS D2VW-5L3-1MS D2VW-01-1 D2VW-01-1M D2VW-01-2MS D2VW-01-3HS D2VW-01-3M D2VW-01-3MS D2VW-01L1B-1 D2VW-01L2-1 D2VW-5-2HS D2VW-5L1-1 D2VW- 5L1A-1M D2VW-5L3-1 D2VW-5L3-1M D2VW-5L1B-2HS D2VW-5L1-1M D2VW-01L1B-3MS-146 D2VW-5L2-3MS- 123 D2VW-5K2-1HS D2VW-01K2-1MS D2VW-01K1B-1HS D2VW-5-1HR D2VW-01L1B-1MS-0 D2VW-5K3-1HS D2VW-5K1B-1M