D2SW Sealed Subminiature Basic Switch Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) ●Use of epoxy resin assures stable sealing, D 2 making this switch ideal for places subject to S W water spray or excessive dust. ●Ideal for automobiles, automatic vending machines, refrigerators, ice-making equipment, bath equipment, hot-water supply systems, air conditioners, and industrial equipments, which require high environmental resistance. ●Models available with UL, CSA, and VDE safety standard compliance. RoHS Compliant Model Number Legend @ @ @ @ @ D2SW- 1 2 3 4 5 1. Ratings 4. Terminals 3 : 125 VAC 3 A H, HS : Solder terminals 01 : 30 VDC 0.1 A D, DS : Self-clinching PCB terminals T, TS : Quick-connect terminals (#110) 2. Actuator M, MS : Molded lead wires None : Pin plunger Note: UL/CSA approved versions are available. L1 : Hinge lever In this case, HS, DS, TS, MS will be added to the end L2 : Hinge roller lever of the model number. UL/CSA approved models have UL approved wiring L3 : Simulated roller hinge lever (AWG22 UL1015). Consult your OMRON sales representative for details. 3. Contact form 5. Length of the molded lead wire None : SPDT None : 300 mm -2 : SPST-NC (Molded lead wire models only) -0 : 1,000 mm -3 : SPST-NO (Molded lead wire models only) 1

D2SW Sealed Subminiature Basic Switch List of Models Ratings 3 A 0.1 A Actuator Terminals Contact form Solder terminals D2SW-3H D2SW-01H Quick-connect terminals (#110) SPDT D2SW-3T D2SW-01T PCB terminals D2SW-3D D2SW-01D Pin plunger SPDT D2SW-3M D2SW-01M Molded lead wire terminals (300 mm) SPST-NC D2SW-3-2M D2SW-01-2M SPST-NO D2SW-3-3M D2SW-01-3M Molded lead wire terminals (1,000 mm) SPDT D2SW-3M-0 D2SW-01M-0 D 2 Solder terminals D2SW-3L1H D2SW-01L1H S Quick-connect terminals (#110) SPDT D2SW-3L1T D2SW-01L1T W PCB terminals D2SW-3L1D D2SW-01L1D Hinge lever SPDT D2SW-3L1M D2SW-01L1M Molded lead wire terminals (300 mm) SPST-NC D2SW-3L1-2M D2SW-01L1-2M SPST-NO D2SW-3L1-3M D2SW-01L1-3M Molded lead wire terminals (1,000 mm) SPDT D2SW-3L1M-0 D2SW-01L1M-0 Solder terminals D2SW-3L2H D2SW-01L2H Quick-connect terminals (#110) SPDT D2SW-3L2T D2SW-01L2T PCB terminals D2SW-3L2D D2SW-01L2D Hinge roller lever SPDT D2SW-3L2M D2SW-01L2M Molded lead wire terminals (300 mm) SPST-NC D2SW-3L2-2M D2SW-01L2-2M SPST-NO D2SW-3L2-3M D2SW-01L2-3M Molded lead wire terminals (1,000 mm) SPDT D2SW-3L2M-0 D2SW-01L2M-0 Solder terminals D2SW-3L3H D2SW-01L3H Quick-connect terminals (#110) SPDT D2SW-3L3T D2SW-01L3T PCB terminals D2SW-3L3D D2SW-01L3D Simulated roller hinge SPDT D2SW-3L3M D2SW-01L3M lever Molded lead wire terminals (300 mm) SPST-NC D2SW-3L3-2M D2SW-01L3-2M SPST-NO D2SW-3L3-3M D2SW-01L3-3M Molded lead wire terminals (1,000mm) SPDT D2SW-3L3M-0 D2SW-01L3M-0 ●Safety Standard Approved Models Ratings 3 A 0.1 A Actuator Terminals Contact form Solder terminals D2SW-3HS D2SW-01HS Quick-connect terminals (#110) D2SW-3TS D2SW-01TS Pin plunger PCB terminals D2SW-3DS D2SW-01DS Molded lead wire terminals (300 mm) D2SW-3MS D2SW-01MS Solder terminals D2SW-3L1HS D2SW-01L1HS Quick-connect terminals (#110) D2SW-3L1TS D2SW-01L1TS Hinge lever PCB terminals D2SW-3L1DS D2SW-01L1DS Molded lead wire terminals (300 mm) D2SW-3L1MS D2SW-01L1MS SPDT Solder terminals D2SW-3L2HS D2SW-01L2HS Quick-connect terminals (#110) D2SW-3L2TS D2SW-01L2TS Hinge roller lever PCB terminals D2SW-3L2DS D2SW-01L2DS Molded lead wire terminals (300 mm) D2SW-3L2MS D2SW-01L2MS Solder terminals D2SW-3L3HS D2SW-01L3HS Simulated roller hinge Quick-connect terminals (#110) D2SW-3L3TS D2SW-01L3TS lever PCB terminals D2SW-3L3DS D2SW-01L3DS Molded lead wire terminals (300 mm) D2SW-3L3MS D2SW-01L3MS Contact Form ●SPDT ●SPST-NC (Molded lead wire ●SPST-NO (Molded lead wire models only) models only) COM NO COM NO NC COM NC (Black) (Blue) (Black) (Blue)(Red) (Black) (Red) The color in parentheses indicates the color of the lead wire. Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories" 2

D2SW Sealed Subminiature Basic Switch Contact Specifications Characteristics Item Model D2SW-3 models D2SW-01 models Item Model D2SW-3 models D2SW-01 models Specification Rivet Crossbar Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) Contact Material Silver Gold alloy Permissible Mechanical 300 operations/min Gap (standard value) 0.5 mm operating Inrush NC 20 A max. 1 A max. frequency Electrical 60 operations/min current NO 10 A max. 1 A max. Insulation resistance 100 mΩ min. (at 500 VDC with insulation tester) Minimum applicable load For terminal models 30 mΩ max. 50 mΩ max. 160 mA at 5 VDC 1 mA at 5 VDC (reference value) * Contact For molded lead wire 50 mΩ max. 70 mΩ max. * Please refer to "Using Micro Loads" in "Precautions" for more information resistance models (300mm) on the minimum applicable load. (initial value) Fmoord melosl d(1e,d0 0le0amdm w)ire 200 mΩ max. 250 mΩ max. D2 Ratings S Between terminals of 1,000 VAC 50/60 Hz 600 VAC 50/60 Hz W the same polarity for 1 min for 1 min Item Between current-carrying Resistive load Dielectric 1,500 VAC 50/60 Hz for 1 min Model Rated voltage metal parts and ground strength *1 250 VAC 2 A Between terminals and D2SW-3 125 VAC 3 A non-current-carrying 1,500 VAC 50/60 Hz for 1 min models metal parts 30 VDC 3 A Vibration D2SW-01 125 VAC 0.1 A resistance *2 Malfunction 10 to 55 Hz, 1.5 mm double amplitude models 30 VDC 0.1 A Shock Destruction 1,000 m/s2 {approx. 100G} max. Note.The above rating values apply under the following test conditions. resistance Malfunction *2 300 m/s2 {approx. 30G} max. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% Mechanical 5,000,000 operations min. (60 operations/min) (3) Operating frequency: 30 operations/min 200,000 operations min. (30 operations/min) Approved Safety Standards Durability * 3 (125 VAC 3 A) 200,000 operations min. Electrical 100,000 operations min. (30 operations/min) UL (UL1054)/CSA (CSA C22.2 No.55) (30 operations/min) (250 VAC 2 A) The terminal specification for models with UL/CSA safety standard certification is “HS”, “TS”, “DS” or “MS.” For terminal models IEC IP67 (excluding the terminals on terminal models) Degree of Rated voltage Model D2SW-3 D2SW-01 protection For molded lead wire IEC IP67 models 125 VAC 3 A 0.1 A Degree of protection against electric 250 VAC 2 A - Class I shock 30 VDC 3 A 0.1 A Proof tracking index (PTI) 175 VDE (EN61058-1) –40°C to +85°C (at ambient humidity of 60% max.) Ambient operating temperature The models in the List of Models on the previous page are not (with no icing or condensation) certified for VDE standards. Ambient operating humidity 95% max. (for +5°C to +35°C) Contact your OMRON representative if you require certified models. Weight Approx. 2 g (for pin plunger models with terminals) Rated voltage Model D2SW-3 D2SW-01 Note.The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator 125 VAC - 0.1 A (refer to "Basic Switch Common Accessories"). 250 VAC 2 A - *2. For the pin plunger models, the above values apply for use at the free 30 VDC 2 A 0.1 A position and total travel position. For the lever models, they apply at the Testing conditions: D2SW-3 3E4 (30,000 operations) T85 (0°C to 85°C) total travel position. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. D2SW-01 5E4 (50,000 operations) T85 (0°C to 85°C) Terminals and Shapes (Unit: mm) ●Solder terminals ●Quick-connect terminals (#110) ●PCB terminals 3.3±0.1 7.33.3±0.1 2.9 2.9 3.3±0.1 2.9 1.8±0.1 1.8 10.1 6.6 7.2 3.9 1.6 1.R60.8 0.5 8.7±0.2 33--12.2.8 dia. holes 0.8 0.7 0.5 5.158.5±09..25±0.1 3.2 6.4±0.2 2.15 5.15 195.5.5±±00.1.2 6.04.±50.2 5.185.81±.02.2 6.14.±30.2 9.5±0.1 15.5±0.2 19.8±0.2 1.85 16.1±0.2 0.55 18.7±0.2 19.8±0.2 19.8±0.2 <PCB Mounting Dimensions (Reference)> 3-1.35 dia. to 1.5 holes PCB thickness t=1.6 mm 8.8±0.2 16.1±0.2 3

D2SW Sealed Subminiature Basic Switch Mounting Holes (Unit: mm) 2-2.4 dia. mounting holes or M2.3 screw holes 9.5±0.1 Dimensions slash Operating Characteristics (Unit: mm) Models with terminals D The illustrations and dimensions are for models with solder terminals. Refer to "Terminals and Shapes" of the previous page for models with quick-connect terminals 2 (#110) and PCB terminals. S (Note. The dimensions not described are the same as those of models with pin plungers.) W The @ is replaced with the code for the terminal that you need. See the "List of Models" for available combinations of models. ●Pin Plunger Models 7.5±0.1 D2SW-3@ 1.8 dia. 2.35+-00..10 5 dia. holesPT A D2SW-01@ Operating Force OF Max. 1.77 N {180 gf} 2.35+-00..105 7.7 OP Releasing Force RF Min. 0.29 N {30 gf} 10.1 Pretravel PT Max. 0.6 mm 3.3±0.1 2.9 Overtravel OT Min. 0.5 mm 7.3 Movement Differential MD Max. 0.1 mm 1.8 Operating Position OP 8.4±0.3 mm 1.6 R0.8 0.5 2.5±0.07 dia. 8.5±0.2 1.36.2 6.4±0.2 5.15 9.5±0.1 15.5±0.2 0.55 18.7±0.2 19.8±0.2 ●Hinge Lever Models D2SW-3L1@ 14.5 D2SW-01L1@ A 5.9 Operating Force OF Max. 0.59 N {60 gf} t=0.3* 3.6 Releasing Force RF Min. 0.06 N {6 gf} FP Overtravel OT Min. 1.0 mm OP Movement Differential MD Max. 0.8 mm Free Position FP Max. 13.6 mm Operating Position OP 8.8±0.8 mm *Stainless-steel lever ●Simulated Roller Hinge Lever Models D2SW-3L3@ 15.8 D2SW-01L3@ A 5.9 Operating Force OF Max. 0.59 N {60 gf} R1.3 3.6 t=0.3* Releasing Force RF Min. 0.06 N {6 gf} Overtravel OT Min. 1.0 mm FP OP Movement Differential MD Max. 0.8 mm Free Position FP Max. 15.5 mm Operating Position OP 10.7±0.8 mm *Stainless-steel lever ●Hinge Roller Lever Models D2SW-3L2@ 14.5 4.8x3.2 *2 dia. D2SW-01L2@ A 5.9 Operating Force OF Max. 0.59 N {60 gf} Releasing Force RF Min. 0.06 N {6 gf} t=0.3*1 Overtravel OT Min. 1.0 mm FP Movement Differential MD Max. 0.8 mm OP Free Position FP Max. 19.3 mm Operating Position OP 14.5±0.8 mm *1. Stainless-steel lever *2. Polyacetal resin roller Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 4

D2SW Sealed Subminiature Basic Switch Models with lead wires Pin plunger models are shown as representatives. Dimensions and operation characteristics of other actuator models are the same as those of terminal models. The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted in the illustration below. ●Pin Plunger Models 7.5±0.1 D2SW-3M D2SW-3M-0 1.8 dia. A 2.35+-00..10 5 dia. holesPT Operating Force OF Max. 1.77 N {180 gf} DD22SSWW--0011MM -0 2.35+-00..015 16.4 16.9 OP RPreeletraasvienlg Force RPTF MMianx. . 0.290. 6N m{3m0 gf} 2.9 Overtravel OT Min. 0.5 mm D 9.2 Movement Differential MD Max. 0.1 mm 2 Operating Position OP 8.4±0.3 mm S W 2.5±0.07 dia. L Dimensions 300 mm type 1,000 mm type AwVire0 .(5bfl amcokl)d*ed lead （5） L 300±10 1,000±30 AV0.5f molded lead wire (blue)* 0.7 5.15 92.51±.20.1 AwVire0 .(5rfe md)o*lded lead 6.4±0.2 * U(ALW/CGS2A2 aUpLp1ro0v1e5d). models have UL approved wiring Note 1.Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2.The operating characteristics are for operation in the A direction ( ). 5

D2SW Sealed Subminiature Basic Switch Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use ●Degree of Protection ●Mounting Do not use the Switch underwater. Use M2.3 mounting screw with plane washers or spring washers The Switch was tested and found to meet the conditions to securely mount the Switch. Tighten the screws to a torque of necessary to meet the following standard, however, the test 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}. checks for water intrusion after immersion for a specified time D period, not for switching operation underwater. ●Operating Body 2 JIS C0920: With the pin plunger models, set the Switch so that the plunger S W Degrees of protection provided by enclosures of electrical can be pushed in from directly above. Since the plunger is apparatus (IP Code) covered with a rubber cap, applying a force from lateral IEC 60529: directions may cause damage to the plunger or reduction in the Degrees of protection provided by enclosures (IP Code) sealing capability. Degree of protection:IP67 (check water intrusion after immersion for 30 min submerged 1 m underwater) ●Protection Against Chemicals Prevent the Switch from coming into contact with oil or chemicals. ●Handling Otherwise, damage to or deterioration of Switch materials may Handle the Switch carefully so as not to break the sealing result. rubber. ●Soldering ●Using Micro Loads •Connecting to Solder Terminals Using a model for ordinary loads to open or close the contact of When soldering the lead wire to the terminal, first insert the a micro load circuit may result in faulty contact. Use models that lead wire conductor through the terminal hole and then operate in the following range. However, even when using micro conduct soldering. load models within the following operating range, if inrush Complete the soldering at the iron tip temperature between current occurs when the contact is opened or closed, it may 350 to 400°C within 5 seconds, and do not apply any external increase the contact wear and so decrease durability. Therefore, force for 1 minute after soldering. Soldering at a excessively insert a contact protection circuit where necessary. The N-level high temperature or soldering for more than 5 seconds may reference value applies for the minimum applicable load. This deteriorate the characteristics of the Switch. value indicates the malfunction reference level for the reliability •Connecting to Quick-connect Terminals level of 60% (λ60). Wire the quick-connect terminals (#110) with receptacles. (JIS C5003) Insert the terminals straight into the receptacles. Applying The equation, λ60=0.5×10-6/operations indicates that the excessive external force laterally may cause deformation of 1 estimated malfunction rate is less than operations with terminals and may damage the housings. 2,000,000 a reliability level of 60%. •Connecting to PCB terminals When using automatic soldering baths, we recommend e (V) soldering at 260±5°C within 5 seconds. Make sure that the oltag 30 0.16 mA 26 mA 100 mA V liquid surface of the solder does not flow over the edge of the board. 24 When soldering terminals manually, complete the soldering at Operating Operating range for range for the iron tip temperature between 350 to 400°C within 5 micro load models general-load D2SW-01 models seconds, and do not apply any external force for 1 minute after D2SW-3 12 soldering. When applying solder, keep the solder away from the case of the Switch and do not allow solder or flux to flow into the case. 5 1 mA 100 mA 160 mA 0 0.1 1 10 100 1,000 Current (mA) 6

D2SW Sealed Subminiature Basic Switch D 2 S W (cid:129) Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. (cid:129) Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. C097-E1-05 0417(0207)(O) 7

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: D2SW-01L1MS D2SW-3HS D2SW-3TS D2SW-3MS D2SW-01L2TS D2SW-3L2MS D2SW-3L2HS D2SW- 01L2MS D2SW-01L3MS D2SW-01L3TS D2SW-3L1HS D2SW-3L1TS D2SW-3L1MS D2SW-3L3HS D2SW-3L3MS D2SW-3DS D2SW-3L1DS D2SW-3L3TS D2SW-3L3DS D2SW-3L2TS D2SW-3L2DS D2SW-01HS D2SW-01TS D2SW-01DS D2SW-01MS D2SW-01L1HS D2SW-01L1DS D2SW-01L3HS D2SW-01L3DS D2SW-01L2DS D2SW- 01L2H D2SW-01L3-3MS D2SW-3-2MS D2SW-3-3MS D2SW-3L1-3M D2SW-3L1H D2SW-3L1T D2SW-3L2D D2SW-3L2H D2SW-3L3M D2SW-3T D2SW-01L2HS D2SW-01L1-3MS D2SW-01L1H D2SW-3L3-3MS D2SW- 3L2T D2SW-3MS-0 D2SW-3L12DS D2SW-3L3T D2SW-3D D2SW-3L3H D2SW-01D D2SW-01L3H D2SW-01H D2SW-3-3MS-0 D2SW-3M-0