Datasheet Panel Mount 1-DCL Series • Ratings from 7 A to 40 A @ 200 VDC and • DC control from 7 A to 10 A @ 500VDC • EMC Compliant to Level 3 • Mosfet Output • Epoxy Free Design • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Load Voltage 7 A 10 A 12 A 20 A 40 A 100 VDC D1D07L D1D12L D1D20L D1D40L 200 VDC D2D07L D2D12L D2D40L 400 VDC D4D07L D4D12L 500 VDC D5D07L D5D10L AVAILABLE OPTIONS Operating Voltage Termination 1D: 1-100 VDC Blank: Screws & clamps 2D: 1-200 VDC K: Installed standoffs with 4D: 1-400 VDC screws for PC Board Series 5D: 1-500 VDC mounting (1) D 1D 07 L K Rated Load Current 07: 7 Amps 10: 10 Amps (500 VDC only) 12: 12 Amps (not for 500 VDC) Required for valid part number 20: 20 Amps (100 VDC only) For options only and not required for valid part number 40: 40 Amps (100 & 200 VDC only) * Not all part number combinations are available. Contact Crydom Technical Support for information on the availability of a specific part number. OUTPUT SPECIFICATIONS (2) Description 7 A 12 A 20 A 40 A 7 A 12 A 40 A 7 A 12 A 7 A 10 A Recommended Operating Voltage [Vdc] 1-72 1-72 1-72 1-72 1-150 1-150 1-150 1-300 1-300 1-385 1-385 Absolute Maximum Rating [Vdc] 100 100 100 100 200 200 200 400 400 500 500 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.2 0.3 0.3 0.1 0.3 0.3 0.3 0.3 0.2 0.3 Maximum Load Current [Adc] (3) 7 12 20 40 7 12 40 7 12 7 10 Minimum Load Current [mA] (4) 1 1 1 1 1 1 1 1 1 1 1 Maximum Surge Current (10msec) [Adc] 23 28 42 106 22 31 106 18 36 19 29 Maximum On-State Voltage Drop @ Rated Current [Vdc] 0.5 0.9 0.8 1 1.5 0.7 0.8 2.3 2.6 3.5 3.3 Maximum On-State Resistance [RDS-ON] [Ohms] 0.07 0.072 0.039 0.025 0.21 0.062 0.021 0.33 0.22 0.5 0.33 Thermal Resistance Junction to Case (Rjc) [°C/W] 2 2 1.71 0.68 1.24 0.71 0.22 0.56 0.39 0.6 0.43 Minimum Heat Sink for Rated Current @ 40°C [°C/W] 5 3 2 1 3 3 0.7 2 1 1 0.7 Maximum Pulse Width Modulation Frequency [Hz] (5) 5000 4000 3500 2500 3500 2000 950 1200 900 1100 900 INPUT SPECIFICATIONS (2) Description DC Control Control Voltage Range 3.5-32 VDC Maximum Reverse Voltage -32 VDC Minimum Turn-On Voltage (6) 3.5 VDC Must Turn-Off Voltage 1 VDC Minimum Input Current (for on-state) 10 mA Maximum Input Current 15 mA Nominal Input Impedance Current Regulated Maximum Turn-On Time [µsec] 100 Maximum Turn-Off Time [µsec] 100 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount GENERAL SPECIFICATIONS(2) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 100 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 2.66 oz (75.5 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/”K” option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC Humidity per IEC60068-2-78 93% non-condensing MTBF (Mean Time Between Failures) at 40°C ambient temperature (8) 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 60°C ambient temperature (8) 11,545,504 hours (1,317 years) WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V Load * * Load V - + + Recommended Wire Sizes Terminals Wire Size Wire Pull-Out (Solid / Stranded) Strength (lbs)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] 1 OUTPUT +2 1 OUTPUT +2 Input 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] SOLID STATE RELAY SOLID STATE RELAY 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] 4 INPUT +3 4 INPUT +3 Output 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] + + V V - - EQUIVALENT CIRCUIT BLOCK DIAGRAMS Input Current vs Input Voltage Standard Regulated “DC” Inputs 14 +DC 33 22 +DC 12 A) m10 CCoirncturoitl TCriirgcgueitr ent ( 8 Curr 6 put 4 n -DC 44 11 -DC I 2 0 0 5 10 15 20 25 30 35 DC Input Voltage Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount MECHANICAL SPECIFICATIONS(2) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination Hex Standoff Termination (“K” Option)(1) 1.1 0.89 1.1 1.04 [27.9] Mounting [22.6] [27.9] Mounting [26.4] 0.49 Hole/Slot 0.49 Hole/Slot (2 places) [12.4] 0.19 [4.9] [12.4] 0.19 [4.9] DIA. DIA. 1 OUTPUT +2 1 OUTPUT +2 1.88 SOLID STATE RELAY 1.7 2.25 1.88 SOLID STATE RELAY 1.7 2.25 [47.6] [43.2] [57.3] [47.6] [43.2] [57.3] 4 INPUT +3 4 INPUT +3 1.0 1.0 0.93 [25.4] [25.4] [23.6] 1.75 1.75 (4 places) [44.5] [44.5] 1.0 [25.4] (2 places) GENERAL NOTES (1) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm). (2) All parameters at Tc=25°C unless otherwise specified. (3) Heat sinking required, see derating curves. (4) Low current loads and high ambient temperature can affect turn-on time. (5) 8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current. (6) Increase minimum voltage by 1V for operations from -20 to -40°C. (7) Decrease maximum control voltage 1.35V/°C above 80°C ambient temperature. (8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). For additional information or specific questions, contact Crydom Technical Support. SURGE CURRENT INFORMATION Single Pulse (i) Duty Factor (10%) (ii) Duty Factor (20%) (ii) Duty Factor (50%) (ii) D1D07L D1D12L 60 80 50 70 mp) mp) 60 Surge Current (A12340000 Surge Current (A 23450000 10 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) D1D20L D1D40L 100 300 Surge Current (Amp) 24680000 Surge Current (Amp)11220505500000 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount SURGE CURRENT INFORMATION Single Pulse (i) Duty Factor (10%) (ii) Duty Factor (20%) (ii) Duty Factor (50%) (ii) D2D07L D2D12L 50 70 60 Surge Current (Amp) 12340000 Surge Current (Amp) 1234500000 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) D2D40L D4D07L 240 50 220 mp) 128000 mp) 40 Surge Current (A 111102464680000000 Surge Current (A 123000 20 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) D4D12L D5D07L 70 40 60 mp) 50 mp) 30 A A Surge Current ( 12340000 Surge Current ( 1200 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) D5D10L 70 60 mp) 50 A Current ( 3400 Surge 1200 0 0.1 1 10 100 1000 Surge Duration (msec) Period For Pulse Wide Modulation applications select Duty Factor 10% the curve according duty factor and pulse duration as following. Pulse W ide Duty Factor 20% Duty Factor = x100 (%) Period Duty Factor 50% Pulse Wide (i) for Single Surge Pulse Tc=40°C ;Tj 175°C (ii) for Repetitive Surge Pulse Tc=40°C ;Tj 130°C Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount THERMAL DERATE INFORMATION (iii) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. D1D07L D1D12L D1D20L 5°C/W No Heat Sink(iii) 3°C/W 5°C/W No Heat Sink(iii) 2°C/W 3°C/W No Heat Sink(iii) 7 12 20 mps) 56 mps) mps)15 A A 8 A ent ( 4 ent ( ent (10 urr 3 urr urr ad C 2 ad C 4 ad C 5 Lo 1 Lo Lo 0 0 0 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC) D1D40L D2D07L D2D12L 1°C/W 3°C/W 5°C/W 3°C/W 5°C/W No Heat Sink(iii) 3°C/W 5°C/W No Heat Sink(iii) 40 7 12 mps)30 mps) 56 mps)10 A A A 8 ent (20 ent ( 4 ent ( 6 urr urr 3 urr C C C 4 ad 10 ad 2 ad Lo Lo 1 Lo 2 0 0 0 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC) D2D40L D4D07L D4D12L 0.7°C/W 1.5°C/W 5°C/W 2°C/W 3°C/W No Heat Sink(iii) 1°C/W 2°C/W 5ºC/W 40 7 12 mps)30 mps) 56 mps)10 A A A 8 ent (20 ent ( 4 ent ( 6 urr urr 3 urr C C C 4 ad 10 ad 2 ad Lo Lo 1 Lo 2 0 0 0 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC) D5D07L D5D10L 1°C/W 3°C/W 5ºC/W 0.7°C/W 2°C/W 5°C/W 7 10 ps) 6 ps) 8 m 5 m A A nt ( 4 nt ( 6 e e urr 3 urr 4 C C d 2 d Loa 1 Loa 2 0 0 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount AGENCY APPROVALS Agency Approvals EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 E116950 ACCESORIES Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad Part number: KS101 Kit Part No. [ºC/W] Clear plastic cover compatible with all new S1 designs. Safety covers provide added KS101 HK1 HS501DR 5.0 TRM1 HSP-1 protection from electric shock when HK4 HS301 / HS301DR 3.0 TRM6 HSP-2 installing or checking equipment. HS251 2.5 HS201 / HS201DR 2.0 Hardware Kit HS202 / HS202DR 2.0 Part number: HK4 HS172 1.7 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount HS151 / HS151DR 1.5 TMR1 lug terminals. HS122 / HS122DR 1.2 HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 031516 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: D1D07L D1D12L D1D20L D1D40L D2D07L D2D12L D2D40L D4D07L D4D12L D5D07L D5D10L D2D40LK D1D40LK