D2 - SERIES SPECIFICATIONS AND ORDERING INFORMATION 1" DIAMETER 0.55 AMP @ 28 VDC The D2 Series switch is used where space is at a premium. This dual-ball side thrust index offers exceptional torque control and is available in 30°, 36°, 45°, and 60° angles. Standard designs utilize diallyl phthalate or ceramic insulation, solder lug terminals, and 30° adjustable stop indexing. SPECIFICATIONS ELECTRICAL MECHANICAL Current and Voltage Rating: Make and break resistive load Materials and Finishes: All parts utilize non-corrosive materials 0.55 amp @ 28 VDC; 0.25 amp @ 115 VAC. as standard. Current Carrying Capacity: 7 amps. Clips and Rotors: Brass with silver plate as standard. Dielectric Strength: 750 VAC between current carrying parts and Insulation: Diallyl phthalate, glass, or ceramic. ground. Index: Dual-ball, side thrust design. Contact Resistance: Average initial 5 milliohms. Index Life: 25,000 cycles minimum. Insulation Resistance: Diallyl in excess of 900,000 megohms. Index Torque: Switches have lowest practical torque consistent Glass in excess of 750,000 megohms. with crisp detenting and smooth, reliable operation. Ceramic in excess of 1,000,000 megohms. Index Angles: Positive 30° standard, 36°, 45°, and 60° available. Hardware: Mounting nut and lockwasher are shipped assembled. Index Stops: Adjustable standard, fixed or continuous. Stop Strength: 10 in. lbs. minimum. D STANDARD PART NUMBER DIALLYL PHTHALATE INSULATION - ADJUSTABLE STOPS CERAMIC INSULATION - ADJUSTABLE STOPS SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS. SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS. - 1/8 DIA. SHAFT ACTIVE POLES/ NO. OF SHORTING NON- FIG. ACTIVE POLES/ NO. OF SHORTING NON- FIG. POLES POSITIONS SECTION SECTIONS SHORTING * POLES POSITIONS SECTION SECTIONS SHORTING * 01 02-12 1 1 D2D0112S D2D0112N DE 01 02-11 1 1 D2C0111S D2C0111N DB 02 02-06 2 1 D2D0206S D2D0206N DL 02 02-05 2 1 D2C0205S D2C0205N DG 02 02-12 1 2 D2D0212S D2D0212N DE 02 02-11 1 2 D2C0211S D2C0211N DB 03 02-05 3 1 D2D0305S D2D0305N DO 03 02-03 3 1 D2C0303S D2C0303N DN 03 02-12 1 3 D2D0312S D2D0312N DE 03 02-11 1 3 D2C0311S D2C0311N DB 04 02-06 2 2 D2D0406S D2D0406N DL 04 02-05 2 2 D2C0405S D2C0405N DG 06 02-05 3 2 D2D0605S D2D0605N DO 06 02-05 2 3 D2C0605S D2C0605N DG 06 02-06 2 3 D2D0606S D2D0606N DL 06 02-03 3 2 D2C0603S D2C0603N DN * FIGURES ARE SHOWN ON PAGES 55 AND 56. DIMENSIONS STANDARD CONSTRUCTION D2D D2C DIALLYL PHTHALATE INSULATION CERAMIC INSULATION 2010 Yonkers Road • ELECTRONIC PRODUCTS Raleigh, NC 27604 UNIT OF ELECTRO SWITCH CORP. Telephone: (888) ROTARYS or (919) 833-0707 20 Fax: (800) 909-9171 or (919) 833-8016

D2 - SERIES ADDITIONAL OPTIONS AND ORDERING INFORMATION How to Order Additional Options: 2 DIGIT INSULATION TOTAL ACTIVE CONTACT TERMINAL INDEX STOP SHAFT/ SHAFT SERIES TYPE POLES POSITIONS TYPE TYPE ANGLE TYPE BUSHING FLAT D2 D-DIALLYL 01- MIN. 12-MAX@30° S-SHORTING L - SOLDER LUG 30° A-ADJ. (30°,45°,60°) 10-MAX@36° N-NON V - VERT. P.C. 30° 36° F-FIXED G - GLASS 08-MAX@45° SHORTING R - (REAR P.C. 45° C-CONT. (30°,36°,45°,60°) 06-MAX@60° NOT CERAMIC) 60° SEE SEE CHART CHART D2 C-CERAMIC 01- MIN. 11-MAX@30° S-SHORTING L - SOLDER LUG 30° A-ADJ. “A” “B” (30°,60°) N-NON 60° F-FIXED 1/8 SHAFT SHORTING C-CONT. CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS ADDITIONAL OPTIONS D 2 (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) , , INSULATION OPTION SHAFT BUSHING AND FLAT OPTIONS D2G GLASS EPOXY INSULATION D SHAFT AS VIEWED WITH NON-TURN LUG AT 3 O'CLOCK AND SHAFT IN EXTREME CCW POSITION AND STRUT BOLTS ORIENTED VERTICALLY. U W Y Z PRINTED CIRCUIT BOARD TERMINAL OPTIONS REAR P.C. DIALLYL ONLY VERTICALP.C. R V CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS. 2010 Yonkers Road • ELECTRONIC PRODUCTS Raleigh, NC 27604 UNIT OF ELECTRO SWITCH CORP. Telephone: (888) ROTARYS or (919) 833-0707 Fax: (800) 909-9171 or (919) 833-8016 21

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E lectroswitch: D2D0206N D2D0406N D2D0305N D2D0112N D2-513 D2C0111S D2D0212N D2D0212S D2D0206S D2-512 D2D0312N D2C0303N D2D0606N D2D0112S D2D0406S D2D0312S D2D0305S D2D0605S