8 7 6 5 4 3 2 1 NOTES 3MTM FOUR-WALL HEADER, D2500 SERIES * LOW PROFILE, SPACE SAVING DESIGN. 1. REGULATORY INFORMATION: * CENTER SLOT POLARIZATION PREVENTS MIS-INSERTIONS AND REDUCES ROHS COMPLIANT. SEE THE INSERTION TIME. REGULATORY INFORMATION .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE * DUAL SLOT POLARIZATION MEANS BROADER COMPATIBILITY WITH COMPETITIVE APPENDIX (RIA) IN THE POLARIZATION DESIGNS (NOT AVAILABLE ON 6, 8 OR 10 POSITIONS). "ROHS COMPLIANCE" SECTION * OPTIONAL RETAINER CLIP FOR LOCKING SOCKETS IN PLACE AND INCREASING OF WWW.3MCONNECTORS.COM FOR CONNECTION RELIABILITY IN VIBRATION-PRONE ENVIRONMENTS. COMPLIANCE INFORMATION. * HIGH TEMPERATURE INSULATOR SUITABLE FOR "NO LEAD" SOLDERING OPERATIONS. 2 IN THE EVENT OF CONFLICT * THROUGH HOLE VERSION SUITABLE FOR REFLOW SOLDERING USING "PASTE IN HOLE" BETWEEN THIS DATA AND THAT TECHNIQUES. CONTAINED IN THE PRODUCT D * EXPOSED SOLDER TAILS (ON RIGHT ANGLE VERSION) PROVIDE EASE OF CLEANING D SPECIFICATION, THE PRODUCT AND REDUCED REPAIR COST. SPECIFICATION TAKES PRECEDENT. * STRAIGHT SURFACE MOUNT VERSION AVAILABLE. 3 NOTCHES A & C WILL ACCOMODATE 3M POLARIZING KEY: N3518. 4 CONTACT TAILS .0245 [.622] WIRE WITH .0075 [.191] CORNER RADII AND .028 [.072] DIAGONAL. 5 SOLDER STANDOFFS FACILITATE .01 [.3] CLEARANCE ABOVE BOARD FOR REFLOW SOLDERING. PHYSICAL: 2 INSULATOR: MATERIAL: HIGH TEMP GLASS FILLED POLYESTER (PCT) FLAMMABILITY: UL94V-0 D25XX-6002 COLOR: BLACK CONTACT: MATERIAL: BRASS STRAIGHT VERSION PLATING: UNDER PLATING: 50-100 " [1.27-2.54 m] NICKEL-OVERALL C C WIPING AREA: 10 " [25 M] GOLD SOLDER TAILS: 40-120 " [1-3 m] MATTE TIN MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE ELECTRICAL: 2 CURRENT RATING: 5.00A, 1 CONTACT POWERED 3.00A, 6 CONTACTS POWERED 1.75A, ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE N O HSI 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING VI E R CURVES. 1 INSULATION RESISTANCE: >1 X 109 AT 500 V - DC 4 WITHSTANDING VOLTAGE: 1,000V AT SEA LEVEL 4 RMS 2 2 - 0R D25XX-5002 ENVIRONMENTAL: 0BE 2 1UM 5G N -N RIGHT ANGLE VERSION TEMPERATURE RATING: -55 C TO 105 C 8AWI 7R PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS D MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) B B D25XX-6V0C 0 0 : 5 SURFACE MOUNT VERSION 0 - DIMENSIONS: INCHES [MM] C [MM] IS REF. ONLY H 68908 AUG 05,2016 JNC SC T U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2016 MFG DATE 2 1 A CHKD DATE APPVL DATE A S. CLATANOFF AUG 05,2016 1: DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. DRAWING 1 2 INCHES TITLE / 3M ELECTRONIC MATERIALS SOLUTIONS DIVISION 5 HEADER, 4-WALL, .0 / INTERCONNECT SOLUTIONS .00 .01 8 LO-PRO, .100 X .100, http://www.3mconnectors.com .000 .005 1 R THIRD ANGLE PROJECTION .0000 H. SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : 3M IS A TRADEMARK OF 3M COMPANY. ASME Y14.5 - 2009 0 d FOR TECHNICAL, SALES OR ORDERING MAX SURFACE ROUGHNESS .0 .3 CAGE SIZE DRAWING NO. REV. ge .00 .13 NUMBER 78-5100-2244-1 H a INFORMATION CALL 800-225-5373 UL FILE NO: E68080 ALL SURFACES .000 m MARKED ONLY ANGLES MODELD2500 SERIES DLIESTT.S YES NO SHT 1 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, D2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E D D .228 .0245 .0005 .250 .338 5.79 0.622 0.013 6.35 8.59 SQ. TYP. .100 2.54 .253 .243 NOTCH "B" .100 (SEE TABLE 1) 6.43 6.17 .194 4.93 2.54 NOTCH "A" (SEE TABLE 1 & NOTE 3) A-A .112 .011 [2.84] SECTION SOLDER TAIL .165 4.19 POSITION 1 NOTCH "C" ORIENTATION C A (SEE TABLE 1 & NOTE 3) C TRIANGLE .298 .390 7.57 TABLE 1 9.91 PIN POLARIZING PIN DIM. "A" DIM. "B" QTY. NOTCHES QTY. 06 .588 [14.94] .508 [12.90] B 06 08 .688 [17.48] .608 [15.44] B 08 N 10 .788 [20.02] .708 [17.98] BC 10 A HSIO VI E 14 .988 [25.10] .908 [23.06] BCDE 14 R 16 1.088 [27.64] 1.008 [25.60] ABCDE 16 1 - 4 DIM. "A" 20 1.288 [32.72] 1.208 [30.68] ABCDE 20 4 2 24 1.488 [37.80] 1.408 [35.76] ABCDE 24 2 - 0R 26 1.588 [40.34] 1.508 [38.30] ABCDE 26 0BE M 1U 30 1.788 [45.42] 1.708 [43.38] ABCDE 30 5G N -N 8WI 34 1.988 [50.50] 1.908 [48.46] ABCDE 34 7RA D .400 10.16 36 2.088 [53.04] 2.008 [51.00] ABCDE 36 MIN. END 40 2.288 [58.12] 2.208 [56.08] ABCDE 40 B STACKABILITY .035 .003 B 50 2.788 [70.82] 2.708 [68.78] ABCDE 50 .250 6.35 0.89 0.08 60 3.288 [83.52] 3.208 [81.48] ABCDE 60 MIN. SIDE .172 .003 AFTER PLATING 64 3.488 [88.60] 3.408 [86.56] ABCDE 64 STACKABILITY TYP. 4.37 0.08 .100 .003 2.54 0.08 .100 .003 .035 .003 POSITION #1 2.54 0.08 0.89 0.08 .050 .003 OPTIONAL HOLE FOR 0 ORDERING INFORMATION 1.27 0.08 POLARIZATION PEG 0 : 5 STRAIGHT VERSION 0 - RECOMMENDED HOLE PATTERN C H 68908 AUG 05,2016 JNC SC T U D25XX-6002-AR SHOWN FROM COMPONENT SIDE REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2016 MFG DATE 2 PIN QUANTITY: PLATING: 1 A CHKD DATE APPVL DATE A (SEE TABLE 1) S. CLATANOFF AUG 05,2016 1: AR = 10 " [0.25 m] GOLD DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 (RIA. E1 & C1 APPLY) Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 SOLDER TAIL: NOTED All rights reserved. DRAWING 1 2 FOR .062 [1.57] THICK BOARD INCHES TITLE / 5 HEADER, 4-WALL, .0 / 8 .00 .01 LO-PRO, .100 X .100, .000 .005 1 THIRD ANGLE PROJECTION .0000 . H SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-2244-1 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODELD2500 SERIES DLIESTT.S YES NO SHT 2 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, D2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E .0245 .0005 D D 0.622 0.013 .228 .250 .338 SQ. TYP. 5.79 6.35 8.59 .253 .243 .390 6.43 6.17 .100 2.54 9.91 NOTCH "B" (SEE TABLE 1) .100 .194 4.93 2.54 .100 2.54 .112 .011 [2.84] SOLDER TAIL NOTCH "A" (SEE TABLE 1 & NOTE 3) B-B SECTION .165 4.19 POSITION 1 NOTCH "C" ORIENTATION C B (SEE TABLE 1 & NOTE 3) C TRIANGLE .298 .390 7.57 TABLE 1 9.91 PIN POLARIZING PIN DIM. "A" DIM. "B" QTY. NOTCHES QTY. 06 .588 [14.94] .508 [12.90] B 06 08 .688 [17.48] .608 [15.44] B 08 N 10 .788 [20.02] .708 [17.98] BC 10 HSIO VI B E 14 .988 [25.10] .908 [23.06] BCDE 14 R 16 1.088 [27.64] 1.008 [25.60] ABCDE 16 1 - 4 20 1.288 [32.72] 1.208 [30.68] ABCDE 20 DIM. "A" 4 2 24 1.488 [37.80] 1.408 [35.76] ABCDE 24 2 - 0R 26 1.588 [40.34] 1.508 [38.30] ABCDE 26 0BE M 1U 30 1.788 [45.42] 1.708 [43.38] ABCDE 30 5G N .41 10.4 -N 8WI 34 1.988 [50.50] 1.908 [48.46] ABCDE 34 7RA D MAX. DIM. TO 36 2.088 [53.04] 2.008 [51.00] ABCDE 36 EDGE OF PCB 40 2.288 [58.12] 2.208 [56.08] ABCDE 40 FOR BUSSING B B 50 2.788 [70.82] 2.708 [68.78] ABCDE 50 60 3.288 [83.52] 3.208 [81.48] ABCDE 60 64 3.488 [88.60] 3.408 [86.56] ABCDE 64 .100 .003 .400 10.16 2.54 0.08 MIN. END STACKABILITY .035 .003 0.89 0.08 .100 .003 POSITION #1 AFTER PLATING ORDERING INFORMATION 2.54 0.08 TYP. 0 0 : 5 RIGHT ANGLE VERSION 0 - C RECOMMENDED HOLE PATTERN H 68908 AUG 05,2016 JNC SC T U D25XX-5002-AR REVISED AND REDRAWN SHOWN FROM COMPONENT SIDE M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2016 MFG DATE 2 A PIN QUANTITY: PLATING: CHKD DATE APPVL DATE A1 S. CLATANOFF AUG 05,2016 1: (SEE TABLE 1) AR = 10 " [0.25 m] GOLD DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 (RIA. E1 & C1 APPLY) Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 SOLDER TAIL: NOTED All rights reserved. DRAWING 1 2 FOR .062 [1.57] THICK BOARD INCHES TITLE / 5 HEADER, 4-WALL, .0 / 8 .00 .01 LO-PRO, .100 X .100, .000 .005 1 THIRD ANGLE PROJECTION .0000 . H SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-2244-1 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODELD2500 SERIES DLIESTT.S YES NO SHT 3 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, D2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E D VACUUM CAP REMOVED D .228 FOR CLARITY .0245 .0005 .250 .338 5.79 .253 0.622 0.013 6.35 8.59 6.43 SQ. TYP. .100 2.54 .243 VACUUM CAP .400 .010 .359 [9.12] SQ. 6.17 .194 4.93 CENTERED ON CONN. 10.16 0.25 POSITION 1 .100 2.54 NOTCH "A" .004 FOR LESS THAN 30 POS. (SEE TABLE 1 & NOTE 3) .170 4.32 .006 FOR 30 AND ABOVE POS. NOTCH "B" .165 (SEE TABLE 1) .440 .010 4.19 11.18 0.25 NOTCH "C" (SEE TABLE 1 & NOTE 3) POSITION 1 C-C ORIENTATION C C SECTION .035 0.89 C TRIANGLE .298 .390 7.57 TABLE 1 9.91 TAPE AND PIN POLARIZING PIN DIM. "A" DIM. "B" REEL PKG QTY. NOTCHES QTY. CODE 06 .588 [14.94] .508 [12.90] B WD (44 MM) 06 08 .688 [17.48] .608 [15.44] B WD (44 MM) 08 C ON HSI VI 10 .788 [20.02] .708 [17.98] BC WD (44 MM) 10 E R 14 .988 [25.10] .908 [23.06] BCDE WD (44 MM) 14 1 DIM. "A" - 16 1.088 [27.64] 1.008 [25.60] ABCDE WD (44 MM) 16 4 4 2 20 1.288 [32.72] 1.208 [30.68] ABCDE WE (56 MM) 20 2 - 24 1.488 [37.80] 1.408 [35.76] ABCDE WE (56 MM) 24 0R 0BE M 1U 26 1.588 [40.34] 1.508 [38.30] ABCDE WE (56 MM) 26 5G N -N 30 1.788 [45.42] 1.708 [43.38] ABCDE WF (72 MM) 30 8AWI 7R D 34 1.988 [50.50] 1.908 [48.46] ABCDE WF (72 MM) 34 .050 36 2.088 [53.04] 2.008 [51.00] ABCDE WG (88 MM) 36 B B 40 2.288 [58.12] 2.208 [56.08] ABCDE WG (88 MM) 40 1.27 50 2.788 [70.82] 2.708 [68.78] ABCDE WG (88 MM) 50 .200 60 3.288 [83.52] 3.208 [81.48] ABCDE WH (120 MM) 60 64 3.488 [88.60] 3.408 [86.56] ABCDE WH (120 MM) 64 5.08 .470 .270 11.94 6.86 .070 1.78 .100 2.54 0 ORDERING INFORMATION 0 TYP. 5: SURFACE MOUNT VERSION 0 - C H 68908 AUG 05,2016 JNC SC T RECOMMENDED PAD LAYOUT D25XX-6V0C-AR-XX U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2016 MFG DATE 2 PIN QUANTITY: PACKAGING OPTIONS: 1 A CHKD DATE APPVL DATE A (SEE TABLE 1) WX = TAPE & REEL PACKAGING (SEE TABLE 1) S. CLATANOFF AUG 05,2016 1: DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 PLATING: DSOC NALOET SC4ALE TEOXLCEERPATN CAESS SMNt . 5P5a1u4l4, 3ddMiiss pctrlroiobspueetder todyt ahwneitdrh mtohauaytn 3n Mfoo tp rbe 3erMm r eaispusrtoihodonur,ci zeoedrd uo psreu fdrup orotsrh eesr. 01 NOTED All rights reserved. AR = 10 " [0.25 m] GOLD DRAWING 1 2 INCHES TITLE / (RIA. E1 & C1 APPLY) HEADER, 4-WALL, 5 .0 / 8 .00 .01 LO-PRO, .100 X .100, .000 .005 1 THIRD ANGLE PROJECTION .0000 . H SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-2244-1 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODELD2500 SERIES DLIESTT.S YES NO SHT 4 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, D2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE PART CUSTOMIZATION THIS SPEC SHEET DETAILS OUR STANDARD OFFERING. D LOW PROFILE LATCH POLARIZING POST D 3M HAS SEVERAL CAPABILITIES THAT CAN PROVIDE A PART TAILORED TO YOUR SPECIFIC NEEDS. ASK YOUR 3M SALES REPRESENTATIVE OR CUSTOMER SERVICE FOR MORE DETAILS. .144 .204 .118 * SELECTIVE PIN REMOVAL (FOR BOARD ASSEMBLY POLARIZATION). 3.66 5.18 3.00 * DIFFERENT PIN LENGTHS. POLARIZING KEY BREAKAWAY TAB .267 .830 .043 .370 6.78 .573 21.08 1.09 9.40 14.55 .09 2.3 .102 .34 C 2.59 C .082 .030 .057 .118 8.5 2.08 0.76 1.45 3.00 PART NO. MATERIAL COLOR PART NO. MATERIAL COLOR .15 DIM. "A" 3505-33B NYLON BLACK 3201-3 PCT BLACK 3.8 NOTE: LATCHES NOT COMPATIBLE WITH REFLOW SOLDERING. 3M PART NO. MATERIAL COLOR DIM. "A" ATTACH LATCHES AFTER SOLDERING. N3518 LCP BLACK .02 N O HSI VI E R NOTE: #2216 B/A SCOTCHWELD CAN BE USED TO 1 - ADHERE KEYS. 4 4 2 2 - 0R 0BE M 1U SHORT/LONG SOCKET RETAINER CLIP 5G N -N 8WI A 7R D PIN QTY. DIM. "A" B B DIM. "A" 06 N/A .11 08 N/A 2.8 10 .81 [20.6] 14 1.02 [25.9] MAX. UNCOATED AREA (ON BOTH EDGES) 16 1.12 [28.4] 20 1.32 [33.5] 24 1.52 [38.7] 26 1.63 [41.4] 30 1.83 [46.4] 34 2.03 [51.6] .2 .1 CLIP HEIGHT 36 N/A 5.1 3 CODE 40 2.33 [59.2] 50 2.83 [71.9] ALTERNATE 60 3.33 [84.6] UNCOATED AREA 64 3.53 [89.7] 0 0 : 5 0 - C NOTE: H 68908 AUG 05,2016 JNC SC T U STAINLESS STEEL WITH GRAY POLYURETHANE COATING. 3505-8XXX REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A CLIP HEIGHT CODE PIN COUNT ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2016 MFG DATE 12 A CHKD DATE APPVL DATE A 0 = .31 [7.9] FOR SOCKETS (SEE TABLE) S. CLATANOFF AUG 05,2016 1: WITHOUT STRAIN RELIEF DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 1 = .53 [13.5] FOR SOCKETS DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 WITH STRAIN RELIEF SCALE 4 EXCNOEPTETD AS MN 55144 dAisllc rloigshedts o rtehseer rtvheadn. for 3M authorized purposes. 0 DRAWING 1 2 INCHES TITLE / 5 HEADER, 4-WALL, NOTE: .0 / 8 .00 .01 1) THE FOLLOWING RETAINER CLIPS HAVE BEEN DISCONTINUED: LO-PRO, .100 X .100, .000 .005 1 3505-8064 THIRD ANGLE PROJECTION .0000 H. SMT, STRAIGHT & RA 3505-8124 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3505-8150 .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-2244-1 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODELD2500 SERIES DLIESTT.S YES NO SHT 5 OF 5 I 8 7 6 5 4 3 2 1