DataSheet Panel Mount DUAL Series • Independently controlled dual output solid-state relay • Ratings from 25A to 40A @ 24-530 VAC • Industry standard package • SCR output for heavy industrial loads • DC Control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 25 A 40 A 4-15 VDC Control D2425D D2440D 15-32 VDC Control D2425DE D2440DE 4-15 VDC Control H12D4825D H12D4840D 15-32 VDC Control H12D4825DE H12D4840D AVAILABLE OPTIONS Output Current Thermal Pad 25: 25 Amps Blank: Not Included 40: 40 Amps H: Included Series H12D48 25 D H -10 Output Voltage Control Voltage Switching Mode D24 : 24-280 VAC D: 4-15 VDC Blank: Zero Voltage Turn-On H12D48: 48-530 VAC DE: 15-32 VDC -10: Random Turn-On Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description D2425xx D2440xx H12D4825xx H12D4840xx Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 48-530 48-530 Transient Overvoltage [Vpk] 600 600 1200 (2) 1200 (2) Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] (3) 500 500 500 500 Maximum Load Current [Arms] (4) 25 40 25 40 Minimum Load Current [Arms] 0.15 0.15 0.15 0.15 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/6250 239/250 597/625 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (Rjc) [°C/W] 1.02 0.63 1.02 0.63 Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec] 285/259 1779/1621 285/259 1779/1621 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright © 2019 Crydom Inc. Specifications subject to change without notice.

DataSheet Panel Mount INPUT SPECIFICATIONS (1) Description D24XXD H12D48XXD E-SUFFIX Control Voltage Range 4-15 VDC 4-15 VDC 15-32 VDC Minimum Turn-On Voltage 4.0 VDC 4.0 VDC 15.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC Typical Input Current @ 5 VDC (@ 24 VDC for E-Suffix) 13 mA 13 mA 15 mA Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm Maximum Turn-On Time [msec] (5) 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80°C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 3.0 oz (86.5g) Encapsulation Thermally Conductive Epoxy Terminals .25" Fastons, .025" Square Pins GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) For option (-10) models the Transient overvoltage is 1100Vac. (3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (4) Heat sinking required, for derating curves see next page. (5) Turn-on time for random turn-on (-10) versions is 0.1 msec MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 120/240V MODEL 480V MODEL 1.17 FASTON MOUNTING (29.7) TERMINAL .250 x .032 FASTON MOUNTING HOLE/SLOT HOLE/SLOT 1.00 .250 X .032 TERMINAL .0192 (4.9) DIA. 0.192 (4.9) DIA. (25.4) (4 PLACES) (4 PLACES) 2 PLC’S P.1I0N0 .C0E2N5 STEQR.S (14.78.75) (25.83.04) (25.83.04) (14.78.75) (14.06.06) 4 PLACES 0.60 .73 (15.2) (18.5) (1.415.5) (2.815.6) (1.797.6) .F1A8S7 TxO .0N32 (2.815.6) (14.57.83) (13.02.16) 1.37 T(4E PRLMAICNEASL) (13.33.12) (34.8) 1.31 (33.2) 1.80 (45.7) Do not forget to visit us at: www.crydom.com Copyright © 2019 Crydom Inc. Specifications subject to change without notice.

DataSheet Panel Mount WIRING DIAGRAM LOAD B 480Vrms 480Vrms A2 B1 LOAD B LOAD A 120/240Vrms 120/240Vrms LOAD A A1 B2 A1 A2 B1 B2 240V Model 480V Model - B CONTROL + B CONTROL - A CONTROL - A CONTROL + B CONTROL + A CONTROL + A CONTROL - B CONTROL THERMAL DERATE INFORMATION DERATE CURVE: 25 AMP Dual SSR DERATING CURVE: 40 A Dual SSR 0.5 ºC/W 0.5 ºC/W 1.0 ºC/W 1.0 ºC/W 2.0 ºC/W s) 1.5 ºC/W 5.0 ºC/W p 2.0 ºC/W m 80 A mps) 50 ent ( 70 rrent (A 40 put Curr 5600 Cu ut put 30 el O 40 Out 20 ann 30 annel 10 ed Ch 20 h n 10 C bi ed 0 om 0 bin 20 30 40 50 60 70 80 C 20 30 40 50 60 70 80 m o C Ambient Temperature (ºC) Ambient Temperature (ºC) AGENCY APPROVALS Agency Approvals Designed in accordance with the requirements of IEC 62314 E116949 LR81689 (240 V, 4-15VDC control only) 5902 UG Rev. 090919 ECN#20756 Do not forget to visit us at: www.crydom.com Copyright © 2019 Crydom Inc. Specifications subject to change without notice.

DataSheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2019 Crydom Inc. Specifications subject to change without notice.

DataSheet Panel Mount ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2019 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: D2440-B