CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Features: • 0201 to 1225 sizes available • Power ratings to 3W • Low inductance – less than 0.2nH typically • RoHS compliant and halogen free • Non-standard resistance values available • 0815, 2010 and 2512 sizes available with narrow terminations (CSRN) Electrical Specifications - CSR Dielectric Power Rating (W) Ohmic Range (Ω) and Tolerance Type / Code Withstanding TCR (ppm/ºC) @ 70°C Voltage (V) 1% 2%, 5% ± 1000 0.1 - 0.147 CSR0201 0.05 200 ± 600 0.15 - 0.499 ± 300 0.511 - 1 CSR0402 0.125 200 ± 200 0.0511 - 1 CSR0603 0.125 200 ± 300 0.02 - 1 CSR0805 0.25 200 ± 200 0.02 - 1 CSR1206 0.5 200 ± 100 (1) 0.01 - 1 ± 600 0.01 - 0.02 ± 400 0.0205 - 0.0511 CSR1210 0.5 200 ± 300 0.0523 - 0.0976 ± 200 0.1 - 1 CSR2010 1 200 ± 100 (1) 0.01 - 1 CSR2512 2 200 ± 200 0.01 - 1 ± 300 - 0.001 - 0.004 CSR0830 2 200 ± 200 0.0051 - 0.01 ± 150 0.0102 - 0.348 ± 300 0.003 - 0.0049 ± 200 0.0051 - 0.02 CSR1225 3 200 ± 150 0.0205 - 0.0301 ± 100 0.0332 - 7.87 (1) Contact Stackpole for TCR below 50 mohm Electrical Specifications – CSRN (Narrow Termination) Dielectric Power Rating (W) Ohmic Range (Ω) and Tolerance Type / Code Withstanding TCR (ppm/ºC) @ 70°C Voltage (V) 1%, 2%, 5% CSRN2010 1 200 ± 250 0.01 - 1 ± 300 0.01 - 0.0196 CSRN0815 1 200 ± 150 0.02 - 0.499 CSRN2512(*) 2 200 ± 200 0.01 - 1 (*) AEC-Q200 Qualified Electrical Specifications – CSR-HP Power Rating (W) D i e l e c tric Ohmic Range (Ω) and Tolerance Type / Code Withstanding TCR (ppm/ºC) @ 70°C Voltage (V) 1%, 2%, 5% ± 400 0.051 - 0.1 CSR0603…-HP 0.2 200 ± 300 0.102 - 0.499 ± 200 0.51 - 1 Rev Date: 03/23/2020 1 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Electrical Specifications – CSR-HP (cont.) Dielectric Power Rating (W) Ohmic Range (Ω) and Tolerance Type / Code Withstanding TCR (ppm/ºC) @ 70°C Voltage (V) 1%, 2%, 5% ± 600 0.01 - 0.02 ± 400 0.0205 - 0.0499 CSR1210…-HP 0.75 200 ± 300 0.051 - 0.091 ± 200 0.1 - 1 Please refer to the High-Power Resistor Application Note (page 7) for more information on designing and implementing high power resistor types. Mechanical Specifications Weight (g) L W T D1 D2 Type / Code Unit (1000 pieces) Body Length Body Width Body Height Top Termination Bottom Termination 0.024 ± 0.001 0.012 ± 0.001 0.009 ± 0.002 0.005 ± 0.002 0.006 ± 0.002 inches CSR0201 0.18 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.05 0.12 ± 0.05 0.15 ± 0.05 mm 0.039 ± 0.002 0.020 ± 0.002 0.013 ± 0.004 0.010 ± 0.004 0.008 ± 0.004 inches CSR0402 0.7 1.00 ± 0.05 0.50 ± 0.05 0.32 ± 0.10 0.25 ± 0.10 0.20 ± 0.10 mm 0.063 ± 0.004 0.031 ± 0.004 0.018 ± 0.004 0.012 ± 0.008 0.012 ± 0.008 inches CSR0603 1.99 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 mm 0.079 ± 0.006 0.049 ± 0.006 0.022 ± 0.004 0.012 ± 0.008 0.016 ± 0.010 inches CSR0805 5.3 2.00 ± 0.15 1.25 ± 0.15 0.55 ± 0.10 0.30 ± 0.20 0.40 ± 0.25 mm 0.120 ± 0.006 0.061 ± 0.006 0.022 ± 0.004 0.020 ± 0.012 0.016 ± 0.010 inches CSR1206 8.82 3.05 ± 0.15 1.55 ± 0.15 0.55 ± 0.10 0.50 ± 0.30 0.40 ± 0.25 mm 0.122 ± 0.004 0.102 ± 0.006 0.022 ± 0.004 0.020 ± 0.012 0.020 ± 0.010 inches CSR1210 15.5 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 0.50 ± 0.30 0.50 ± 0.25 mm 0.197 ± 0.008 0.100 ± 0.008 0.020 ± 0.006 0.068 ± 0.006 0.067 ± 0.006 inches CSR2010 27.03 5.00 ± 0.20 2.54 ± 0.20 0.50 ± 0.15 1.72 ± 0.15 1.70 ± 0.15 mm 0.252 ± 0.008 0.126 ± 0.008 0.020 ± 0.006 0.075 ± 0.006 0.075 ± 0.006 inches CSR2512 53.08 6.40 ± 0.20 3.20 ± 0.20 0.50 ± 0.15 1.90 ± 0.15 1.90 ± 0.15 mm 0.079 ± 0.008 0.295 ± 0.012 0.024 ± 0.004 0.016 ± 0.008 0.016 ± 0.008 inches CSR0830 35.71 2.00 ± 0.20 7.50 ± 0.30 0.60 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 mm Mechanical Specifications – CSRN (Narrow Termination) Weight (g) L W T D1 D2 Type / Code Unit (1000 pieces) Body Length Body Width Body Height Top Termination Bottom Termination CSRN0815 19.96 0.079 ± 0.008 0.148 ± 0.008 0.024 ± 0.004 0.016 ± 0.008 0.016 ± 0.008 inches 2.00 ± 0.20 3.75 ± 0.20 0.60 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 mm 0.197 ± 0.008 0.096 ± 0.006 0.024 ± 0.006 0.024 ± 0.012 0.020 ± 0.010 inches CSRN2010 27.03 5.00 ± 0.20 2.45 ± 0.15 0.60 ± 0.15 0.60 ± 0.30 0.50 ± 0.25 mm 0.250 ± 0.008 0.124 ± 0.006 0.024 ± 0.004 0.024 ± 0.012 0.022 ± 0.010 inches CSRN2512 53.08 6.35 ± 0.20 3.15 ± 0.15 0.60 ± 0.10 0.60 ± 0.30 0.55 ± 0.25 mm Rev Date: 03/23/2020 2 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Mechanical Specifications – CSR1225 Weight (g) Type / Code L W T D1 D2 F Unit (1000 pieces) CSR1225 64.88 0.126± 0.006 0.254± 0.006 0.035± 0.006 0.024± 0.012 0.031± 0.010 0.090± 0.005 inches 3.20± 0.15 6.45± 0.15 0.90± 0.15 0.60± 0.30 0.80± 0.25 2.29± 0.13 mm Performance Characteristics Test Test Method Test Specification Typical Test Condition High Temperature 1% Tol: (± 1% + 0.05Ω) 1 000 hours at T = 155°C. Unpowered. Measurement MIL-STD-202 Method 108 ≤ 0.5% Exposure 2%, 5% Tol: (± 1.5% + 0.1Ω) at 24 ± 4 hours after test conclusion. ± (0.5% + 0.05Ω) ≤ 0.25% Short Time JIS-C-5201-1 4.13 Overload IEC 60115-1 4.13 ± (1% + 0.05Ω) R C V ( r a t e d c urrent) * 2.5 for 5 seconds. ≤ 0.5% For high power rating 1000 Cycles (-55°C to +125°C) Measurement at 24 ± Temperature 1% Tol: (± 0.5% + 0.05Ω) 4 hours after test conclusion. 30 minuntes maximum JESD22 Method JA-104 ≤ 0.5% Cycling 2%, 5% Tol: (± 1.5% + 0.1Ω) dwell time at each temperature extreme. 1 minute maximum transition time. 1000 hours 85°C / 85% RH. Note: Specified 1% Tol: (± 1% + 0.1Ω) Biased Humidity MIL-STD-202 Method 103 ≤ 0.5% conditions: 10% of operating power. Measurement at 2%, 5% Tol: (± 2% + 0.1Ω) 24 ± 4 hours after test conclusion. 1% Tol: (± 1% + 0.1Ω) Condition D Steady State TA = 125°C at rated power. Operational Life MIL-STD-202 Method 108 ≤ 0.5% 2%, 5% Tol: (±2% + 0.1Ω) Measurement at 24 ± 4 hours after test conclusion. Electrical test not required. Inspect device External Visual MIL-STD 883 Method 2009 - Pass construction, marking and workmanship. Verify physical dimensions to the applicable device Physical JESD22 Method JB-100 - Pass detail specification. Note: User(s) and supplier Dimensions specification, electrical test not required. Resistance to Note: Aqueous wash chemical - OKEM Clean or MIL-STD 202 Method 215 Marking unsmeared Pass Solvents equivalent. Do not use banned solvents. Mechanical M I L - S TD 202 Method 213 1% Tol: (± 0.25% + 0.05Ω) ≤ 0 . 5 % Figure 1 of Method 213. Condition C. Shock 2%, 5% Tol: (± 1% + 0.05Ω) 5g's for 20 minuntes, 12 cycles each of 3 orientations. Note: Use 8" X 5" PCB 0.031" thick 7 secure points on 1% Tol: (± 0.5% + 0.05Ω) Vibration MIL-STD 202 Method 204 ≤ 0.5% one long side and 2 secure points at corners of 2%, 5% Tol: (±1% + 0.05Ω) opposite sides. Parts mounted within 2" from any secure point. Test from 10 - 2000Hz. Resistance to 1% Tol: (± 0.5% +0.05Ω) C ondition B no pre-heat of samples. Note: Single MIL-STD 202 Method 210 ≤ 0.5% Soldering Heat 2%, 5% Tol: (± 1% + 0.05Ω) wave solder - Procedure 2 for SMD. With the electrometer in direct contact with the discharge tip, verify the voltage setting at levels of ± ESD AEC-Q200-002 -- Pass 500V, ± 1kV, ± 2kV, ± 4kV, ± 8kV. The electrometer reading shall be within ± 10% for voltages from 500V to ≤ 8kV. Electrical test not required. Magnification 50 times. Conditions: SMD: Solderability J-STD-002 > 95% Coverage Pass a) Method B, 4 hours @ 155°C dry heat @ 235°C. b) Method B @ 215°C category 3. c) Method D category 3 at 260°C. Rev Date: 03/23/2020 3 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Performance Characteristics (cont.) Test Test Method Test Specification Typical Test Condition Parametrically test per lot and sample size Electrical requirements, summary to show Min, Max, Mean and User Spec -- Pass Characterization Standard Deviation at room as well as Min and Max operating temperatures. No ignition of tissue or scorching V - 0 or V - 1 are acceptable. Electrical test not Flammability UL-94 Pass of pine board. required. Board Flex AEC-Q200-005 1% Tol: (± 1% + 0.05Ω) ≤ 0 . 5 % 60 second minimum holding time. 2%, 5% Tol: (± 1% + 0.05Ω) Terminal Strength AEC-Q200-006 No breakage Pass (SMD) Flame AEC-Q200-001 No flame Pass Retardance 1.42 times Max. Operating Voltage for 1 minute. JIS-C-5201-1 4.7 Voltage Proof No breakdown or flashover Pass 0201: 50V; 0402: 100V; 0603: 150V; 0805: 300V IEC-60115-1 4.7 1206, 1210, 2010, 2512, 0830, 1225, 0815: 400V Operating temperature range is -55ºC to +155ºC Power Derating Curve: -55ºC 70ºC 100 %) 80 er ( w Po 60 d ate R 40 nt e erc 20 P 155ºC 0 -60 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (ºC) Recommended Pad Layouts - CSR Type / Code a b c Unit CSR0201 0.010 0.012 0.016 ± 0.008 inches 0.25 0.30 0.40 ± 0.20 mm 0.020 0.020 0.024 ± 0.008 inches CSR0402 0.50 0.50 0.60 ± 0.20 mm 0.031 0.039 0.035 ± 0.008 inches CSR0603 0.80 1.00 0.90 ± 0.20 mm 0.039 0.039 0.053 ± 0.008 inches CSR0805 1.00 1.00 1.35 ± 0.20 mm 0.079 0.045 0.067 ± 0.008 inches CSR1206 2.00 1.15 1.70 ± 0.20 mm 0.079 0.045 0.098 ± 0.008 inches CSR1210 2.00 1.15 2.50 ± 0.20 mm Rev Date: 03/23/2020 4 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Recommended Pad Layouts – CSR (cont.) Type / Code a b c Unit 0.039 0.071 0.299 ± 0.008 inches CSR0830 1.00 1.80 7.60 ± 0.20 mm 0.142 0.055 0.098 ± 0.008 inches CSR2010 3.60 1.40 2.50 ± 0.20 mm 0.193 0.063 0.126 ± 0.008 inches CSR2512 4.90 1.60 3.20 ± 0.20 mm 0.047 0.079 0.276 ± 0.008 inches CSR1225 1.20 2.00 7.00 ± 0.20 mm Recommended Pad Layouts - CSRN Type / Code a b c Unit 0.039 0.071 0.154 ± 0.008 inches CSRN0815 1.00 1.80 3.90 ± 0.20 mm 0.142 0.055 0.098 ± 0.008 inches CSRN2010 3.60 1.40 2.50 ± 0.20 mm 0.193 0.063 0.126 ± 0.008 inches CSRN2512 4.90 1.60 3.20 ± 0.20 mm Reel Specifications Size A B C W T Unit 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 0201 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 0402 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 0603 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 0805 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 1206 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.374 ± 0.004 0.453 ± 0.039 inches 1210 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 9.50 ± 0.10 11.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.531 ± 0.039 0.610 ± 0.039 inches 2010 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 13.50 ± 1.00 15.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.531 ± 0.039 0.610 ± 0.039 inches 2512 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 13.50 ± 1.00 15.50 ± 1.00 mm 1225 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.531 ± 0.039 0.610 ± 0.039 inches 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 13.50 ± 1.00 15.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.531 ± 0.039 0.610 ± 0.039 inches 0815 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 13.50 ± 1.00 15.50 ± 1.00 mm 7.008 ± 0.039 2.362 ± 0.039 0.531 ± 0.028 0.689 ± 0.039 0.768 ± 0.039 inches 0830 178.00 ± 1.00 60.00 ± 1.00 13.50 ± 0.70 17.50 ± 1.00 19.50 ± 1.00 mm Rev Date: 03/23/2020 5 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Packaging Specifications – Paper Tape Size A B W E F Unit 0.015 ± 0.002 0.027 ± 0.002 0.315 ± 0.004 0.069 ± 0.002 0.138 ± 0.002 inches 0201 0.38 ± 0.05 0.68 ± 0.05 8.00 ± 0.10 1.75 ± 0.05 3.50 ± 0.05 mm 0.026 ± 0.004 0.045 ± 0.004 0.315 ± 0.008 0.069 ± 0.004 0.138 ± 0.002 inches 0402 0.65 ± 0.10 1.15 ± 0.10 8.00 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 mm 0.043 ± 0.004 0.075 ± 0.004 0.315 ± 0.008 0.069 ± 0.004 0.138 ± 0.002 inches 0603 1.10 ± 0.10 1.90 ± 0.10 8.00 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 mm 0.063 ± 0.004 0.094 ± 0.008 0.315 ± 0.008 0.069 ± 0.004 0.138 ± 0.002 inches 0805 1.60 ± 0.10 2.40 ± 0.20 8.00 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 mm 0.075 ± 0.004 0.138 ± 0.008 0.315 ± 0.008 0.069 ± 0.004 0.138 ± 0.002 inches 1206 1.90 ± 0.10 3.50 ± 0.20 8.00 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 mm 0.114 ± 0.004 0.138 ± 0.008 0.315 ± 0.008 0.069 ± 0.004 0.138 ± 0.002 inches 1210 2.90 ± 0.10 3.50 ± 0.20 8.00 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 mm Size P0 P1 P2 D0 T Unit 0.157 ± 0.004 0.079 ± 0.002 0.079 ± 0.004 0.059 + 0.004, -0 0.017 ± 0.008 inches 0201 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.10 1.50 + 0.10, -0 0.42 ± 0.20 mm 0402 0.157 ± 0.004 0.079 ± 0.002 0.079 ± 0.002 0.059 + 0.004, -0 0.018 ± 0.004 inches 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 1.50 + 0.10, -0 0.45 ± 0.10 mm 0.157 ± 0.004 0.157 ± 0.002 0.079 ± 0.002 0.059 + 0.004, -0 0.028 ± 0.004 inches 0603 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.10, -0 0.70 ± 0.10 mm 0805 0.157 ± 0.004 0.157 ± 0.002 0.079 ± 0.002 0.059 + 0.004, -0 0.033 ± 0.004 inches 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.10, -0 0.85 ± 0.10 mm 0.157 ± 0.004 0.157 ± 0.002 0.079 ± 0.002 0.059 + 0.004, -0 0.033 ± 0.004 inches 1206 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.10, -0 0.85 ± 0.10 mm 1210 0.157 ± 0.004 0.157 ± 0.002 0.079 ± 0.002 0.059 + 0.004, -0 0.033 ± 0.004 inches 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.10, -0 0.85 ± 0.10 mm Packaging Specifications – Embossed Plastic Tape Type A B W E F Unit 0.110 ± 0.004 0.217 ± 0.004 0.472 ± 0.012 0.069 ± 0.004 0.217 ± 0.002 inches 2010 2.80 ± 0.10 5.50 ± 0.10 12.00 ± 0.30 1.75 ± 0.10 5.50 ± 0.05 mm 0.133 ± 0.004 0.263 ± 0.004 0.472 ± 0.012 0.069 ± 0.004 0.217 ± 0.004 inches 2512 3.38 ± 0.10 6.68 ± 0.10 12.00 ± 0.30 1.75 ± 0.10 5.50 ± 0.10 mm 0.133 ± 0.004 0.263 ± 0.004 0.472 ± 0.012 0.069 ± 0.004 0.217 ± 0.004 inches 1225 3.38 ± 0.10 6.68 ± 0.10 12.00 ± 0.30 1.75 ± 0.10 5.50 ± 0.10 mm 0815 0.098 ± 0.008 0.175 ± 0.008 0.472 ± 0.012 0.069 ± 0.004 0.217 ± 0.002 inches 2.50 ± 0.20 4.45 ± 0.20 12.00 ± 0.30 1.75 ± 0.10 5.50 ± 0.05 mm 0.098 ± 0.008 0.327 ± 0.008 0.630 ± 0.012 0.069 ± 0.004 0.307 ± 0.002 inches 0830 2.50 ± 0.20 8.30 ± 0.20 16.00 ± 0.30 1.75 ± 0.10 7.80 ± 0.05 mm Rev Date: 03/23/2020 6 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions Packaging Specifications – Embossed Plastic Tape (cont.) Type P0 P1 P2 D0 T Unit 0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 + 0.004, -0 0.039 ± 0.008 inches 2010 4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 + 0.10, -0 1.00 ± 0.20 mm 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 + 0.002, -0 0.057 ± 0.008 inches 2512 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 + 0.05, -0 1.45 ± 0.20 mm 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 + 0.002, -0 0.057 ± 0.008 inches 1225 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 + 0.05, -0 1.45 ± 0.20 mm 0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.061 + 0.004, -0 0.047 ± 0.008 inches 0815 4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.55 + 0.10, -0 1.20 ± 0.20 mm 0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 + 0.004, -0 0.047 ± 0.008 inches 0830 4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 + 0.10, -0 1.20 ± 0.20 mm High Power Chip Resistors and Thermal Management Stackpole has developed several surface mount resistor series in addition to our current sense resistors, which have had higher power ratings than standard resistor chips. This has caused some uncertainty and even confusion by users as to how to reliably use these resistors at the higher power ratings in their designs. The data sheets for the RHC, RMCP, RNCP, CSR, CSRN, CSRF, CSS, and CSSH state that the rated power assumes an ambient temperature of no more than 100°C for the CSS / CSSH series and 70°C for all other high power resistor series. In addition, IPC and UL best practices dictate that the combined temperature on any resistor due to power dissipated and ambient air shall be no more than 105°C. At first glance this wouldn’t seem too difficult, however the graph below shows typical heat rise for the CSR1206 100 milliohms at full rated power. The heat rise for the RMCP and RNCP would be similar. The RHC with its unique materials, design, and processes would have less heat rise and therefore would be easier to implement for any given customer. Rev Date: 03/23/2020 7 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions The 102°C heat rise shown here would indicate there will be additional thermal reduction techniques needed to keep this part under 105°C total hot spot temperature if this part is to be used at 0.75 watts of power. However, this same part at the usual power rating for this size would have a heat rise of around 72°C. This additional heat rise may be dealt with using wider conductor traces, larger solder pads and land patterns under the solder mask, heavier copper in the conductors, via through PCB, air movement, and heat sinks, among many other techniques. Because of the variety of methods customers can use to lower the effective heat rise of the circuit, resistor manufacturers simply specify power ratings with the limitations on ambient air temperature and total hot spot temperatures and leave the details of how to best accomplish this to the design engineers. Design guidelines for products in various market segments can vary widely so it would be unnecessarily constraining for a resistor manufacturer to recommend the use of any of these methods over another. Note: The final resistance value can be affected by the board layout and assembly process, especially the size of the mounting pads and the amount of solder used. This is especially notable for resistance values ≤ 50 mΩ. This should be taken into account when designing. RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. RoHS Compliance Status Lead-Free Standard Package / Lead-Free Standard Series Lead-Free Termination Effective Date Product Description Termination Mfg. Effective Date Series Type RoHS Compliant Composition (Std Product Series) Code (YY/WW) Thick Film Current Sensing YES by means of CSR SMD 100% Matte Sn over Ni May-04 04/18 Surface Mount Chip Resistor exemption 7c-I Thick Film Current Sensing YES by means of CSRN SMD 100% Matte Sn over Ni May-04 04/18 Surface Mount Chip Resistor, Narrow exemption 7c-I “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. Rev Date: 03/23/2020 8 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.

CSR / CSRN Series Stackpole Electronics, Inc. Thick Film Current Sensing Resistor Resistive Product Solutions How to Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 C S R 1 2 0 6 F T 1 0 L 0 - H P Product Series Size Tolerance Packaging Resistance Value Special (*) Code Description Code W Code Tol Code Description Size Quantity Code Description Four characters with the CSR Standard 0201 0.05 F 1% 7" Reel 0201, 0402 10000 multiplier used as the -HP High Power Narrow 0 402 0.13 G 2% Paper Tape 0603, 0805, 1206, 1210 5000 (*) Only available CSRN Terminations 0603 0.13 J 5% T 7" Reel 2010, 2512 4000 decimal holder. f o r 0 6 0 3 a nd 1210 "L" used as multiplier of 0805 0.25 Plastic Tape 0815, 0830, 1225 2000 10-3 for any value s i z e s 1206 0.5 7" Reel 0402 under 0.1 ohm 1210 0.5 Paper Tape 0603, 0805, 1206, 1210 K 1000 2010 1 7" Reel 2010, 2512 0.051 ohm = 51L0 2512 2 Plastic Tape 0815, 0830, 1225 0.35 ohm = R350 0815 1 1 ohm = 1R00 0830 2 1225 3 Rev Date: 03/23/2020 9 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use.