CSC www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP FEATURES • Isolated, bussed and dual terminator schematics available • Body height: “A” profile = 0.195" (4.95 mm) and “B” profile = 0.295" (7.50 mm) standard; custom “C” profile = 0.350" (8.89 mm) also available • “A” profile standard in 4 thru 12 pins Available • Thick film resistive elements • Reduces total assembly costs • Resistor elements protected by tough epoxy conformal coating • Wide resistance range (10  to 2.2 M) • Available in bulk pack as standard; optional tube pack is also available • Meets EIA/ECA-CB23 rev. G whisker test requirements for class 1A products • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS TEMP. TEMPERATURE MAX. GLOBAL POWER RATING RESISTANCE COEFFICIENT PACKAGE COEFFICIENT TOLERANCE (2) WORKING MODEL/ ELEMENT (1) RANGE TRACKING (1) HEIGHT (- 55 °C to + 125 °C) ± % VOLTAGE (3) SCHEMATIC P70 °C W  ± ppm/°C (- 55 °C to + 125 °C) V ± ppm/°C DC 10 to 50 250 A 0.20 50.1 to 2.2M 100 CSCxxx01 1, 2, 5 50 100 10 to 50 250 B 0.25 50.1 to 2.2M 100 10 to 50 250 A 0.30 50.1 to 2.2M 100 CSCxxx03 1, 2, 5 50 100 10 to 50 250 B 0.40 50.1 to 2.2M 100 10 to 50 250 A 0.20 50.1 to 2.2M 100 CSCxxx05 1, 2, 5 150 100 10 to 50 250 B 0.25 50.1 to 2.2M 100 Notes • See derating curves for package power rating (1) For resistor power ratings at + 25 °C see derating curves (2) ± 2 % standard, ± 1 % and ± 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less Revision: 03-May-13 1 Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CSC www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGEK (preferred part number format) C S C 0 8 A 0 3 1 0 0 R G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = “A” profile 01 = Bussed R =  F = ± 1 % EK = Lead (Pb)-free, bulk Blank = Standard available B = “B” profile 03 = Isolated K = k G = ± 2 % PA = Tin/lead, bulk (dash number) 04 = 4 pin 00 = Special M = M J = ± 5 % (up to 3 digits) 08 = 8 pin 10R0 = 10  S = Special From 1 to 999 12 = 12 pin 680K = 680 k Z = 0  as applicable 1M00 = 1.0 M Jumper 0000 = 0  Jumper Historical Part Number example: CSC08A03101GEK (will continue to be accepted) CSC 08 A 03 101 G EK HISTORICAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE CODE New Global Part Numbering: CSC08A05131AGEK (preferred part number format) C S C 0 8 A 0 5 1 3 1 A G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = “A” profile 05 = Dual 3 digit F = ± 1 % EK = Lead (Pb)-free, bulk Blank = Standard available B = “B” profile terminator impedance G = ± 2 % PA = Tin/lead, bulk (Dash Number) 04 = 4 pin code, followed J = ± 5 % (Up to 3 digits) 08 = 8 pin by alpha From 1 to 999 12 = 12 pin modifier (see as applicable impedance table) Historical Part Number example: CSC08A05131AGEK (will continue to be accepted) CSC 08 A 05 221 331 G EK HISTORICAL PACKAGE RESISTANCE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE 1 VALUE 2 CODE Note • For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542). TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage coefficient of resistance V < 50 ppm typical eff Dielectric strength V 200 AC Isolation resistance (03 schematic)  > 100M Operating temperature range °C - 55 to + 125 DIMENSIONS in inches (millimeters) A 0.098 (2.49) Max. Max. C Max. 0.130 ± 0.010 Pin (3.30 ± 0.254) #1 0.045 0.050 (1.27) Max. 0.032 (1.14) 0.012 ± 0.003 (0.813) (0.305 ± 0.076) 0.018 ± 0.003 (Leads are a long 0.100 ± 0.010 (2.54 ± 0.254) (0.457 ± 0.076) centerline of body) Non-Accumulative B Revision: 03-May-13 2 Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CSC www.vishay.com Vishay Dale 01 SCHEMATIC GLOBAL NUMBER OF A C B MODEL RESISTORS (MAX.) (MAX.) CSC04 3 0.390 (9.91) 0.300 (7.62) CSC05 4 0.490 (12.45) 0.400 (10.16) CSC06 5 0.590 (14.99) 0.500 (12.70) CSC07 6 0.690 (17.53) 0.600 (15.24) “A” profile = 0.195 (4.95) CSC08 7 0.790 (20.07) 0.700 (17.78) “B” profile = 0.295 (7.50) CSC09 8 0.890 (22.61) 0.800 (20.32) 1 2 3 n-1 n CSC10 9 0.990 (25.15) 0.900 (22.86) CSC11 10 1.09 (27.69) 1.00 (25.40) CSC12 11 1.19 (30.23) 1.100 (27.94) 03 SCHEMATIC GLOBAL NUMBER OF A C B MODEL RESISTORS (MAX.) (MAX.) CSC04 2 0.390 (9.91) 0.300 (7.62) CSC06 3 0.590 (14.99) 0.500 (12.70) “A” profile = 0.195 (4.95) CSC08 4 0.790 (20.07) 0.700 (17.78) “B” profile = 0.295 (7.50) CSC10 5 0.990 (25.15) 0.900 (22.86) 1 2 3 4 n-1 n CSC12 6 1.19 (30.23) 1.100 (27.94) 05 SCHEMATIC GLOBAL NUMBER OF A C B MODEL RESISTORS (MAX.) (MAX.) CSC04 4 0.390 (9.91) 0.300 (7.62) R2 CSC05 6 0.490 (12.45) 0.400 (10.16) CSC06 8 0.590 (14.99) 0.500 (12.70) R1 CSC07 10 0.690 (17.53) 0.600 (15.24) “A” profile = 0.195 (4.95) CSC08 12 0.790 (20.07) 0.700 (17.78) “B” profile = 0.295 (7.50) CSC09 14 0.890 (22.61) 0.800 (20.32) CSC10 16 0.990 (25.15) 0.900 (22.86) 1 2 3 n-1 n CSC11 18 1.09 (27.69) 1.00 (25.40) CSC12 20 1.19 (30.23) 1.100 (27.94) STOCKED RESISTANCE VALUES IN  MECHANICAL SPECIFICATIONS (“G” TOLERANCE) Marking resistance Permanency testing per Standard E-24 resistance values stocked. Consult factory. to solvents MIL-STD-202, method 215 Per MIL-STD-202, method 208E, Many dual terminator resistance values stocked. Consult Solderability RMA flux factory. Body High alumina, epoxy coated Terminals (1) Solder plated leads Note (1) Coating meniscus meets class 2 requirements of IPC-A-610. IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note • For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530). Revision: 03-May-13 3 Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CSC www.vishay.com Vishay Dale ”A“ Profile “A” PROFILE + 70 °C PACKAGE RATINGS CSC12A 1.5 W CSC11A 1.37 W CSC10A Package CSC10A 1.25 W 1.90 W) CSC09A 1.12 W g ( 1.50 CSC08A Package n Rati 1.15 CSC06A Package CSC08A 1.00 W er CSC07A 0.87 W w Po Single Resistor CSC06A 0.75 W 0.45 03 Schematic 0.30 01 and 05 Schematics CSC05A 0.62 W CSC04A 0.40 W - 50 + 25 + 70 + 125 + 150 Derating Ambient T e mperature ° C “B” PROFILE + 70 °C PACKAGE RATINGS ”B“ Profile CSC12B 1.90 W CSC11B 1.75 W 2.50 CSC10B Package CSC10B 1.60 W W) 2.00 CSC08B Package CSC09B 1.45 W g ( CSC08B 1.30 W n CSC06B Package ati 1.50 R CSC07B 1.15 W er Single Resistor w CSC06B 1.00 W Po 0.60 03 Schematic CSC05B 0.80 W 01 and 05 Schematics 0.38 CSC04B 0.60 W - 50 + 25 + 70 + 125 + 150 Derating Ambient T e mperature ° C Revision: 03-May-13 4 Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CSC www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic Bussed The CSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (pin no. 1). Commonly used in the following applications: • “Wired OR” pull-up • Open collector pull-up • Power gate pull-up • TTL input pull-down • MOS/ROM pull-up/pull-down • TTL unused gate pull-up 1 2 3 n-1 n * “A” profile standard, “B” profile available. 03 Schematic Isolated The CSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: • “Wired OR” pull-up • Long-line impedance balancing • Power driven pull-up • LED current limiting • Power gate pull-up • ECL output pull-down 1 2 3 4 n-1 n • Line termination • TTL input pull-down * “A” Profile standard, “B” profile available. 05 Schematic Dual Terminator The CSCxxx05 circuits contain series pairs of resistors. Each series R2 pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 * “A” profile standard, “B” profile available. 1 2 3 n-1 n PERFORMANCE TEST CONDITIONS MAX. R (TYPICAL TEST LOTS) Thermal shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % R Short time overload 2.5 x rated working voltage, 5 s ± 0.25 % R Low temperature operation 45 min at full rated working voltage at - 65 °C ± 0.25 % R Moisture resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 1.00 % R Resistance to soldering heat Leads immersed in + 350 °C solder to within 1/16" of body for 3 s ± 0.25 % R Shock Total of 18 shocks at 100 g's ± 0.25 % R Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % R 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full Load life ± 1.00 % R 1000 h period. Derated according to the curve. Terminal strength 4.5 pound pull for 30 s ± 0.25 % R Insulation resistance 10 000 M (minimum) - Dielectric withstanding voltage No evidence of arcing or damage (200 VRMS for 1 min) - Revision: 03-May-13 5 Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000