NT *RoHS VCEOARVMSIAPILOLINAASBLE Features Applications NT MPLIA n Thick film technology n Current sensing O HS C n Power rating of 2 watts at 70 °C n Power supplies *Ro n Low resistance value available n Stepper motor drives R 1 n RoHS compliant* n Snubber resistor for flyback power supplies 0 0 REE D F LEA CRM2512 - High Power Current Sense Chip Resistors General Information Tacu hvreere rByno tw uliirmdneist i®rn eCgs.RisMta2n5c1e2 r aSnegreie,s m isa kai nthgi citk s fiuLVlEimEAtRaDH S ISFb pORCNlEoOeSE MwA PfRLoeIE ArrN Tdr*eifsfeisrteonr tw aipthp laic raatitoinngs oinf 2p owwaettrs s iunp ap lsyt acnirdcauritds 2in5c1lu2d cinhgip cfuorrrmeantt. sTehniss inpgro adnudc t has Ro Electrical Characteristics Model CRM2512 Characteristic (0.047 to 0.91 W) (0 W,1 W to 1 M W) Power Rating @ 70 °C 2 W Operating Temp. Range -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 1349 mV 300 V Maximum Overload Voltage 2698 mV 600 V Insulation Resistance > 1000 MW 0.047 - 0.91 W 1 W - 9.76 W 10 W - 1 MW 0 W, 1.0 - 1 MW Resistance Range (E24 Values) (E96 + E24 Values) (E96 + E24 Values) (E24 Values) Resistance Tolerance ±1 % & ±5 % ±1 % ±1 % ±5 % ±100 PPM/°C, Temperature Coefficient ±100 PPM/°C ±100 PPM/°C ±200 PPM/°C ±200 PPM/°C Zero Ohm Jumper <0.02 W Max. Rated Current 6A Notes: (1) CRM2512 2 W loading with total solder pad and trace size of 300 mm2. (3) Jumper (0 W): Rated current 6 A maximum with 300 mm2 pad. (2) E = (PxR)1/2 Temperature coefficient is not applicable. E: Working Voltage (V); P: Rated Power (W); R: Resistance Value (W) For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Environmental Characteristics Characteristic Data Moisture Sensitivity Level .........................1 Test ΔR Max. ESD Classification (HBM) .....................N/A Load Life (1000 hours) 1 % Tolerance < 1 % 5 % Tolerance < 3 % Short Term Overload 1 % Tolerance < 1 % 5 % Tolerance < 2 % Thermal Shock 1 % Tolerance < 0.5 % 5 % Tolerance < 1 % WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf.

CRM2512 - High Power Current Sense Chip Resistors Product Dimensions Recommended Solder Pad Layout Derating Curve 6.3 ± 0.20 2.45 (0.248 ± 0.008) (.096) %) o ( 100 3.1 ± 0.20 ati TOP SIDE (0.122 ± 0.008) 3.7 er R (.146) w o 0.6 ± 0.20 0.6 ± 0.20 P (0.024 ± 0.008) (0.024 ± 0.008) -55 70 155 7.6 Ambient Temperature (°C) (.299) 1.8 ± 0.20 (0.070 ± 0.008) MM DIMENSIONS: (INCHES) How to Order CRM 2512 - F X - R100 E LF Model (CRM = Precision Chip Resistor) Size 2512 = 2512 Size Resistance Tolerance • F = ±1 % • J = ±5 % TCR (PPM/°C - See Electrical Characteristics chart) • W = ±200 PPM/°C • X = ±100 PPM/°C • / = Jumper Resistance Value • 1 % or 5 % Tolerance: R <1 ohm ..............“R” represents decimal point followed by three significant digits (example: R100 = 0.100 ohm) • 1% Tolerance: <100 ohms ...........“R” represents decimal point (example: 24R3 = 24.3 ohms) ≥100 ohms ...........First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5K ohms) • 5% Tolerance: <10 ohms .............“R” represents decimal point (example: 4R7 = 4.7 ohms) ≥10 ohms .............First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470K ohms) 0 ohm Jumper ......“000” Packaging • E = 4000 pieces per 180 mm (7 inch) reel Termination • LF = Tin-plated (RoHS Compliant) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf.

1000 S) 100 T T A W R ( WE 10 O K P CRM2010 A E CRM1206 P 1 CRM0805 CRM2512 - High Power Current Sense Chip Resistors 0.1 0.0001 0.001 0.01 0.1 1 PULSE DURATION (SEC.) Pulse Load Characteristics 1000 S) 100 T T A W R ( WE 10 O P K A E P 1 0.1 0.0001 0.001 0.01 0.1 1 PULSE DURATION (SEC.) Soldering Profile 250 Peak 260 +5/-0 °C 1.75 ± 0.1 230 °C or higher PAPER TAPE (0.069 ± 0.004) e (°C) 200 180 °C Pre-heating Zone TOP TAPE (0.015.59 ++00..10/0-40/-0)DIA. D(I0A1..0 .M559IN). (0.52.157 ± ± 0 0.0.0502) ur at 150 150 °C 12.0 ± 0.2 mper 90 ± 30 seconds (0.472 ± 0.008) Te 100 30 ± 10 secondsRESISTOR 6.9 ± 0.2 Soldering3 Z.6o0n ±e 0.20 (0.272 ± 0.008) 2.0 ± 0.05 4.0 ± 0.05 (0.142 ± 0.008) 50 Heating Time 0.85 ± 0.15 (0.145.07 ±± 00..1004) (0.079 ± 0.002) (0.157 ± 0.002) (0.033 ± 0.006) USER DIRECTION OF FEED Packaging Dimensions (Conforms to EIA RS-481A) 1.75 ± 0.1 PAPER TAPE (0.069 ± 0.004) 13.0 ± 1.0 TOP TAPE 1.5 +0.1/-0 DIA. 1.5 5.5 ± 0.05 (0.512 ± 0.039) (0.059 +0.004/-0) (0.059) (0.217 ± 0.002) DIA. DIA. MIN. 180 +0/-3 (7.09 +0/-0.118) 12.0 ± 0.2 DIA. (0.472 ± 0.008) 60.0 (2.362) MIN. RESISTOR 6.9 ± 0.2 DIA. 3.60 ± 0.20 (0.272 ± 0.008) 2.0 ± 0.05 4.0 ± 0.05 (0.142 ± 0.008) 4.0 ± 0.1 (0.079 ± 0.002) (0.157 ± 0.002) 0.85 ± 0.15 (0.157 ± 0.004) (0.033 ± 0.006) USER DIRECTION OF FEED 15.4 ± 2.0 (0.606 ± 0.079) 13.0 ± 1.0 (0.512 ± 0.039) MM DIMENSIONS: (INCHES) 13.0 ± 1.0 (0.512 ± 0.039) REV. 09/18 DIA. Specifications are subject to change without notice. 180 +0/-3 Users should verify actual device performance in their specific application(7s..0 9 +0/-0.118) The products described herein and this document are subject to specific legal dDisIcAl.aimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf. 60.0 (2.362) MIN. DIA. 15.4 ± 2.0 (0.606 ± 0.079) 13.0 ± 1.0 (0.512 ± 0.039)

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B ourns: CRM2512JVR300ELJ CRM2512JVR910ELJ CRM2512JVR500ELJ CRM2512JVR095ELJ CRM2512JVR100ELJ CRM2512JVR200ELJ CRM2512FXR820ELF CRM2512JXR820ELF CRM2512JXR510ELF CRM2512FXR510ELF CRM2512FXR750ELF CRM2512-FX-R300ELF CRM2512-FX-R910ELF CRM2512-JX-R100ELF CRM2512-JX- R200ELF CRM2512-JX-R300ELF CRM2512-JX-R910ELF CRM2512-JZ-R050ELJ CRM2512-JZ-R060ELJ CRM2512-JZ-R075ELF CRM2512-JZ-R090ELJ CRM2512-FX-R100ELF CRM2512-FX-R200ELF CRM2512-JW- 104ELF CRM2512-JW-201ELF CRM2512-FX-1000ELF CRM2512-FX-1001ELF CRM2512-FX-1002ELF CRM2512- FX-10R0ELF CRM2512-FX-2201ELF CRM2512-JW-100ELF CRM2512-JW-101ELF CRM2512-JW-102ELF CRM2512-JW-103ELF CRM2512-JW-1R0ELF CRM2512-JW-220ELF CRM2512-JW-222ELF CRM2512-JW-470ELF CRM2512-JX-R750ELF CRM2512-FX-4701ELF CRM2512-JX-R470ELF CRM2512-JW-562ELF CRM2512-FX- 1103ELF CRM2512-JW-1R3ELF CRM2512-FX-7502ELF CRM2512-JW-302ELF CRM2512-FX-4422ELF CRM2512- JW-120ELF CRM2512-FX-3092ELF CRM2512-JW-5R6ELF CRM2512-JW-303ELF CRM2512-FX-4022ELF CRM2512-JW-2R7ELF CRM2512-FX-4320ELF CRM2512-FX-1102ELF CRM2512-FX-3302ELF CRM2512-FX- 43R0ELF CRM2512-JW-3R6ELF CRM2512-FX-2R00ELF CRM2512-JW-6R2ELF CRM2512-JW-153ELF CRM2512- JW-200ELF CRM2512-FX-12R1ELF CRM2512-FX-5102ELF CRM2512-FX-2492ELF CRM2512-FX-20R0ELF CRM2512-JW-2R0ELF CRM2512-JW-151ELF CRM2512-JW-160ELF CRM2512-FX-15R0ELF CRM2512-FX- 2000ELF CRM2512-FX-2490ELF CRM2512-JW-3R0ELF CRM2512-FX-R240ELF CRM2512-JW-1R5ELF CRM2512- JW-433ELF CRM2512-JW-1R8ELF CRM2512-FX-3482ELF CRM2512-JW-152ELF CRM2512-FX-1302ELF CRM2512-FX-4992ELF CRM2512-FX-3572ELF CRM2512-JW-7R5ELF CRM2512-JW-8R2ELF CRM2512-FX- 5100ELF CRM2512-FX-4532ELF CRM2512-JW-182ELF CRM2512-JW-9R1ELF CRM2512-JW-3R3ELF CRM2512- JW-1R2ELF CRM2512-FX-1502ELF CRM2512-FX-3002ELF CRM2512-FX-4R30ELF CRM2512-JW-224ELF CRM2512-JW-130ELF CRM2512-FX-3R90ELF CRM2512-FX-2552ELF CRM2512-FX-2673ELF CRM2512-FX- 5R10ELF CRM2512-FX-3320ELF