D/CRCW Vishay Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES • Stability ΔR/R = 1 % for 1000 h at 70 °C • Lead (Pb)-bearing termination plating on Ni barrier layer • Metal glaze on high quality ceramic • Halogen-free according to IEC 61249-2-21 definiton • AEC-Q200 qualified, rev. C compliant STANDARD ELECTRICAL SPECIFICATIONS SIZE LIMITING RATED DISSIPATION TEMPERATURE RESISTANCE ELEMENT TOLERANCE MODEL INCH METRIC PW70 VOLTAGE COEpFpFmIC/KIENT % RAΩNGE SERIES Umax. AC/DC ± 100 ± 1 E24; E96 0.063 50 1R0 to 10M D10/CRCW0402 0402 RR 1005M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 1.5 A ± 100 ± 1 E24; E96 0.10 75 1R0 to 10M D11/CRCW0603 0603 RR 1608M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 2.0 A ± 100 ± 1 E24; E96 0.125 150 1R0 to 10M D12/CRCW0805 0805 RR 2012M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 2.5 A ± 100 ± 1 E24; E96 0.25 200 1R0 to 10M D25/CRCW1206 1206 RR 3216M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 3.5 A ± 100 ± 1 E24; E96 0.50 200 1R0 to 10M CRCW1210 1210 RR 3225M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 5.0 A ± 100 ± 1 E24; E96 1.0 200 1R0 to 2M2 CRCW1218 1218 RR 3246M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 7.0 A ± 100 ± 1 E24; E96 0.75 400 1R0 to 10M CRCW2010 2010 RR 5025M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 6.0 A ± 100 ± 1 E24; E96 1.0 500 1R0 to 10M CRCW2512 2512 RR 6332M ± 200 ± 5 E24 Zero-Ohm-Resistor: Rmax. = 20 mΩ, Imax. = 7.0 A Notes • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. • Marking: See datasheet “Surface Mount Resistor Marking” (document number 20020). • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20008 118 Revision: 18-Nov-10

D/CRCW Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors Vishay TECHNICAL SPECIFICATIONS D10/ D11/ D12/ D25/ PARAMETER UNIT CRCW1210 CRCW1218 CRCW2010 CRCW2512 CRCW0402 CRCW0603 CRCW0805 CRCW1206 Rated dissipation at 70°C (1) W 0.063 0.1 0.125 0.25 0.5 1.0 0.75 1.0 Limiting element voltage V 50 75 150 200 200 200 400 500 UMAX. AC/DC Insulation voltage UINS. V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 (1 min) Insulation resistance Ω > 109 Category temperature range °C - 55 to + 155 Failure rate h-1 < 0.1 x 10-9 Weight mg 0.65 2 5.5 10 16 29.5 25.5 40.5 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION Part Number: CRCW0805562RFKTA (2) C R C W 0 8 0 5 5 6 2 R F K T A MODEL VALUE TOLERANCE TCR PACKAGING SPECIAL CRCW0402 R = Decimal F = ± 1 % K = ± 100 ppm/K TA Up to 2 digits CRCW0603 K = Thousand J = ± 5 % N = ± 200 ppm/K TB CRCW0805 M = Million Z = Jumper S = Jumper or TC CRCW1206 0000 = Jumper special TD CRCW1210 TE CRCW1218 TF CRCW2010 TG CRCW2512 TH TK Product Description: CRCW0805 100 562R 1 % RT1 CRCW0805 100 562R 1 % RT1 MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING CRCW0402 ± 100 ppm/K 10R = 10 Ω ± 1 % RT1 CRCW0603 ± 200 ppm/K 562R = 562 Ω ± 5 % RT5 CRCW0805 10K = 10.0 kΩ RT6 CRCW1206 1M = 1 MΩ RT7 CRCW1210 0R0 = Jumper RF4 CRCW1218 R02 CRCW2010 R67 CRCW2512 R82 RT9 Note (2)Preferred way for ordering products is by use of the PART NUMBER. Document Number: 20008 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com Revision: 18-Nov-10 119

D/CRCW Vishay Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors PACKAGING PAPER TAPE BLISTER TAPE MODEL UNIT ACC. IEC 60286-3, TYPE I ACC. IEC 60286-3, TYPE II QUANTITY PART NUMBER PRODUCT DESC. QUANTITY PART NUMBER PRODUCT DESC. 180 mm/7" 10 000 TD RT7 D10/CRCW0402 330 mm/13" 50 000 TE RF4 180 mm/7" 5000 TA RT1 D11/CRCW0603 285 mm/11.25" 10 000 TB RT5 330 mm/13" 20 000 TC RT6 180 mm/7" 5000 TA RT1 D12/CRCW0805 285 mm/11.25" 10 000 TB RT5 330 mm/13" 20 000 TC RT6 180 mm/7" 5000 TA RT1 D25/CRCW1206 285 mm/11.25" 10 000 TB RT5 330 mm/13" 20 000 TC RT6 180 mm/7" 5000 TA RT1 CRCW1210 285 mm/11.25" 10 000 TB RT5 330 mm/13" 20 000 TC RT6 CRCW1218 180 mm/7" 4000 TK RT9 CRCW2010 180 mm/7" 4000 TF R02 2000 TG R67 CRCW2512 180 mm/7" 4000 TH R82 DIMENSIONS SOLDER PAD DIMENSIONS in millimeters SIZE DIMENSIONS in millimeters REFLOW SOLDERING WAVE SOLDERING INCH METRIC L W H T1 T2 a b l a b l 0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.1 0.4 0.6 0.5 0603 1608 1.55 + 0.10 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0.5 0.9 1.0 0.9 0.9 1.0 - 0.05 0805 2012 2.0 + 0.20 1.25 ± 0.15 0.45 ± 0.05 0.3 + 0.20 0.3 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3 - 0.10 - 0.10 1206 3216 3.2 + 0.10 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3 - 0.20 1210 3225 3.2 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 2.5 2.0 1.1 2.5 2.2 1218 3246 3.2 + 0.10 4.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1.05 4.9 1.9 1.25 4.8 1.9 - 0.20 2010 5025 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2 1.2 3.2 5.2 www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20008 120 Revision: 18-Nov-10

D/CRCW Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors Vishay FUNCTIONAL PERFORMANCE Single Pulse 1000 W) 2512 Pd (max. 100 121202111800 oa 1206 L 0805 se 0603 ul 10 0402 P 1 0.1 0.01 10-6 10-5 10-4 10-3 10-2 10-1 1 10 100 Pulse Duration t (s) i Maximum pulse load, single pulse; applicable if P 0 and n < 1000 and Û ≤ Ûmax.; for permissible resistance change equivalent to 8000 h operation Continuous Pulse 1000 W) 2512 Pd (max. 100 121202111800 oa 1206 L 0805 se 0603 ul 10 0402 P s u o u n 1 nti o C 0.1 0.01 10-6 10-5 10-4 10-3 10-2 10-1 1 10 100 Pulse Duration t (s) i Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax.; for permissible resistance change equivalent to 8000 h operation Pulse Voltage V) 2000 (max. 1800 2512 Ûe 1600 ag 2010 olt 1400 V e 1200 s ul P 1000 800 1206/1210/1218 600 400 0805 0603 200 0402 0 10- 6 10- 5 10- 4 10- 3 10- 2 10- 1 1 10 Pulse Duration t (s) i Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.; for permissible resistance change equivalent to 8000 h operation Document Number: 20008 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com Revision: 18-Nov-10 121

D/CRCW Vishay Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors Derating % 120 n n i o 100 ati p si Dis 80 d e Rat 60 of n ctio 40 a Fr 20 0 - 55 - 25 0 25 50 75 100 125 155 175 70 Ambient Temperature in °C Non-Linearity B120 d n A i3100 c ni o m 80 Har 1206, 2010 d 0805 3r 60 of n o uati 40 00640032 n e Att 20 0 10 100 1K 10K 100K 1M 10M Resistance Value R in Ω Current Noise V 100 V/ µ Ant Noise in 1 10 00460002813022500610 e urr 1 C 0.1 0.01 100 1K 10K 100K 1M 10M Resistance Value R in Ω www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20008 122 Revision: 18-Nov-10

D/CRCW Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors Vishay TEST PROCEDURES AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE (ΔR) IEC PROCEDURE EN STABILITY CLASS 1 STABILITY CLASS 2 60082-2 60115-1 TEST OR BETTER OR BETTER TEST CLAUSE METHOD Stability for product types: 1Ωto 10MΩ 1Ωto 10 MΩ D/CRCW 4.5 - Resistance - ± 1 % ± 5 % 4.7 - Voltage proof U = 1.4 · Uins; 60 s No flashover or breakdown 4.13 - Short time overload U= 2.5 x P70 x R ≤ 2 x Umax.; ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) duration: Acc. to style Solder bath method; Sn60Pb40; Good tinning (≥ 95 % 4.17.2 58 (Td) Solderability non-activated flux; covered); (235 ± 5) °C, (2 ± 0.2) s no visible damage (20/- 55/20) °C and 4.8.4.2 - Temperature coefficient ± 100 ppm/K ± 200 ppm/K (20/125/20) °C RR 1608 and smaller: 9 N 4.32 21 (Uu Shear (adhesion) No visible damage 3) RR 2012 and larger: 45 N No visible damage, 4.33 21 (Uu Substrate bending Depth 2 mm; 3 times no open circuit in bent position 1) ± (0.25 % R + 0.05 Ω) 30 min. at - 55 °C; 30 min. at 125°C 4.19 14 (Na) Rapid change of temperature 5 cycles ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) 1000 cycles ± (1 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) 4.23 - Climatic sequence: - 4.23.2 2 (Ba) Dry heat 125 °C; 16h 55 °C; ≥ 90 %RH; 4.23.3 30 (Db) Damp heat, cyclic 24 h; 1 cycle 4.23.4 1 (Aa) Cold - 55 °C; 2h ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) 4.23.5 13 (M) Low air pressure 1kPa; (25± 10) °C; 1h 55 °C; ≥ 90 %RH; 4.23.6 30 (Db) Damp heat, cyclic 24 h; 5 cycles 4.23.7 - DC load U= P x R 70 U = √(P70 x R) ≤ Umax. 1.5 h on; 0.5 h off; 4.25.1 - Endurance at 70 °C 70 °C; 1000 h ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) 70 °C; 8000 h ± (2 % R + 0.1 Ω) ± (4 % R + 0.1 Ω) Solder bath method 4.18.2 58 (Td) Resistance to soldering heat ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) (260 ± 5) °C; (10 ± 1) s IEC 60695-11-5; 4.35 - Flamability, needle flame test No burning after 30 s 10 s (40 ± 2) °C; 4.24 78 (Cab) Damp heat, steady state ± (1 % R + 0.05 Ω) (93 ± 3) % RH; 56 days Endurance at upper 4.25.3 - 155 °C; 1000 h ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) category temperature IEC 61340-3-1; Electrostatic discharge 4.40 - 3 pos. + 3 neg. discharges; ± (1 % R + 0.05 Ω) (human body model) ESD test voltage acc. to size Isopropyl alcohol; 4.29 45 (XA) Component solvent resistance No visible damage 50 °C; method 2 Isopropyl alcohol; Marking legible, 4.30 45 (XA) Solvent resistance of marking 50 °C; method 1, toothbrush no visible damage Document Number: 20008 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com Revision: 18-Nov-10 123

D/CRCW Vishay Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors TEST PROCEDURES AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE (ΔR) IEC PROCEDURE EN STABILITY CLASS 1 STABILITY CLASS 2 60082-2 60115-1 TEST OR BETTER OR BETTER TEST CLAUSE METHOD Stability for product types: 1Ωto 10MΩ 1Ωto 10 MΩ D/CRCW f = 10 Hz to 2000 Hz; Vibration, endurance by x, y, z ≤ 1.5 mm; 4.22 6 (Fc) ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) sweeping A ≤ 200 m/s2; 10 sweeps per axis U= 15 x P70 x R ≤ 2 x Umax.; 4.37 - Periodic electric overload 0.1 s on; 2.5 s off; ± (1 % R + 0.05 Ω) 1000 cycles 4.27 - Single pulse high voltage Û= 10 x P70 x R ≤ 2 x Umax.; ± (1 % R + 0,05 Ω) overload, 10 µs/700 µs 10 pulses All tests are carried out in accordance with the following specifications: (cid:129) EN 60115-1, generic specification (cid:129) EN 140400, sectional specification (cid:129) EN 140401-802, detail specification (cid:129) IEC 60068-2, environmental test procedures Packaging of components is done in paper or blister tapes according to IEC 60286-3. www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20008 124 Revision: 18-Nov-10

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000