NT *RoHS VCEOARVMSIAPILOLINAASB LE Features NT MPLIA n RoHS compliant* n Suitable for most types of soldering HS CO n Power rating at 70 °C: CR2010 - 1/2 W , processes Ro CR2512 - 1 W n Standard packaging on tape and reel * n Tight tolerances of bottom electrode width n AEC-Q200 approval upon request 2 2 2 n Three layer termination process with nickel barrier prevents leaching and provides REE excellent solderability D F LEA CR2010/CR2512 - Chip Resistors Electrical Characteristics Derating Curve CPohwarearc Rteartiinsgti c@ 70 °C LVEEARDH SISF ORCNEOSE MAPRLIEC AM1NRT/o*22d 0We1l0 CMR1o2 Wd5e1l2 wer (%) 1086000 Operating Temperature Range Ro -55 °C to +155 °C Po DMearxaimteudm to W 0 oLrokaindg aVt oltage +210505 V°C Rated 4200 Maximum Overload Voltage 400 V 0 -55 0 70 155 Resistance Range: 1 % 10 ohms ≤ R ≤ 1M ohms Ambient Temperature (°C) E-96 + E-24 ±100 PPM/°C 1M ohms < R ≤ 10M ohms ±200 PPM/°C For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Resistance Range: 5 % 10 ohms ≤ R ≤ 10M ohms E-24 ±200 PPM/°C DDimimenesniosnioaln Darla Dwirnagwsing 1 ohm ≤ R < 10 ohms 10M ohms < R ≤ 20M ohms ±400 PPM/°C I1 I1 Zero Ohm Jumper <0.05 ohm 2 A/5 A 2 A/5 A Rated/Maximum Current H Chip Dimensions I2 I2 Dimension Model Model W CR2010 CR2512 L 5.00 ± 0.20 6.30 ± 0.20 L MM (0.197 ± 0.008) (0.248 ± 0.008) DIMENSIONS: (INCHES) 2.50 ± 0.20 3.10 ± 0.20 W (0.098 ± 0.008) (0.122 ± 0.008) 0.60 ± 0.10 0.60 ± 0.15 H (0.024 ± 0.004) (0.024 ± 0.006) 0.60 ± 0.25 0.60 ± 0.25 I1 (0.024 ± 0.010) (0.024 ± 0.010) 0.60 ± 0.25 0.60 ± 0.25 I2 (0.024 ± 0.010) (0.024 ± 0.010) Performance Characteristics Test Limits DR Test Procedure Method 1 % 5 % -55 ℃ for 30 minutes, +155 ℃ for 30 minutes, Thermal Shock IEC60115-1-4.19 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω) 5 cycles Short Time Overload 2.5 X rated voltage for 5 seconds IEC60115-1-4.13 ≤±(1 % + 0.05 Ω) Resistance to Solder Heat 270 ±5 ℃ for 10 ±1 seconds IEC60115-1-4.18 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω) Resistance to Dry Heat 125 ±5 ℃ for 96 ±4 hours IEC60115-1-4.23.2 ≤±(1 % + 0.05 Ω) ≤±(2 % + 0.1 Ω) Rated voltage for 1000 hours, 70 ℃, Load Life IEC60115-1-4.25.1 ≤±(1 % + 0.05 Ω) ≤±(3 % + 0.1 Ω) 1.5 hours “ON“, 0.5 hours “OFF” Rated voltage for 1000 hours, 40 ±2 ℃, Load Life with Humidity IEC60115-1-4.24 ≤±(1 % + 0.05 Ω) ≤±(3 % + 0.1 Ω) 90~95 % RH, 1.5 hours “ON“, 0.5 hours “OFF” Solderability 245 ±5 ℃, 2 ±0.5 seconds IEC60115-1-4.17 ≥95 % of area covered Bending 3 mm IEC60115-1-4.33 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω) Dielectric Withstanding -- IEC60115-1-4.7 >500 V Voltage Insulation Resistance 100 V IEC60115-1-4.6 ≥1 GΩ *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CR2010/CR2512 - Chip Resistors How to Order CR 2010 - F X - 8252 E LF Model (CR = Chip Resistor) Size • 2010 • 2512 Resistance Tolerance F = ±1 % ..............Use with “X” TCR code only for values from 10 ohms through 1 megohm; Use with “W” TCR code only for values from 1 megohm through 10 megohms J = ±5 % .................Use with “W” TCR code for values from 10 ohms through 10 megohms; Use with “Z” TCR code for values above 10 megohms through 20 megohms; Use with “/” TCR code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. TCR (ppm/°C) X = ±100 W = ±200 Z = ±400 / = Used with “J” Resistance Tolerance code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. Resistance Value For 1 % Tolerance: <100 ohms...............“R” represents decimal point (example: 24R3 = 24.3 ohms) ≥100 ohms ...............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k W) For 5 % Tolerance: <10 ohms ..............“R” represents decimal point (example: 4R7 = 4.7 ohms) ≥10 ohms ...............First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper) Packaging E = Embossed Plastic Tape (4,000 pcs.) on 7 ” Plastic Reel Termination LF = Tin-plated (RoHS compliant) Soldering Profile for RoHS Compliant Chip Resistors and Arrays Marking Explanation 275 <1>Maximum of 20 seconds between 260 °C peak Resistors with 5 % tolerance may have a +255 °C and +260 °C < 1 > 255 °C 3-digit or 4-digit resistance code. Complete information about resistance 225 value and tolerance is found on the label 220 °C of the reel of chip resistors. e (°C)175 190 °C s6e0c o- n9d0s • 5si g%n:i fi3c adnigt,it sth, ifirdrs dt itgwito i sd inguitms baerer of ur 150 °C Ramp Down zeros to follow. Letter R is decimal point erat 6 °C/second for values from 1 to 9.9 ohms. p m • 5 %: 4 digits, first three digits are Te125 significant, fourth digit is number of 60 - 120 seconds zeros to follow. Letter R is decimal point 10 seconds minimum for values from 1 to 99.9 ohms. • 1 %: 4 digits, first three digits are 75 significant, fourth digit is number of Ramp Up 3 °C/second maximum zeros to follow. Letter R is decimal for values from 1 to 99.9 ohms. 25 0 50 100 150 200 250 300 Time (seconds) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

3C3R1220 1-0 2/C mR2m5 1S2M -D C hTirpim Rmesiinsgto Prsotentiometer Packaging Dimensions 4.0 ± 0.1 (.157 ± .004) A 2.0 ± 0.05 Dimension Model Model (.079 ± .002) CR2010 CR2512 B 2.8 ± 0.2 3.5 ± 0.2 A (0.110 ± 0.008) (0.138 ± 0.008) F 5.5 ± 0.2 6.7 ± 0.2 B W (0.217 ± 0.008) (0.264 ± 0.008) 12.0 ± 0.3 12.0 ± 0.3 W (0.472 ± 0.012) (0.472 ± 0.012) P0 (.015.65 ++ 0.0.10/4-0/-0) (.10.5795 ±± .00.014) F (0.251.57 ±± 00..0050 2) (0.251.57 ±± 00..0050 2) 4.0 ± 0.1 4.0 ± 0.1 P0 (0.157 ± 0.004) (0.157 ± 0.004) MM DIMENSIONS: (INCHES) 2.0 ± 0.5 (.080 ± .020) 13.0 ± 0.5 (.512 ± .020) 80.0 ± 0.5 (3.150 ± .020) 20.0 MIN. (.787) 178.0 ± 2.0 (7.008 ± .080) 16.7 MAX. (.657) REV. 07/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.