Features n RoHS compliant* n Tight tolerance of bottom electrode width n 1 % and 5 % tolerance options 10 n Three layer termination process with nickel barrier helps prevent leaching and provides C excellent solderability n Tape and reel packaging CR Series - Thick Film Chip Resistors Electrical Characteristics Model No. Characteristic CR01005 CR0201 CR0402 CR0603 CR0805 CR1206 CR2010 CR2512 Power Rating 1/32 W 1/20 W 1/16 W 1/10 W 1/8 W 1/4 W 1/2 W 1 W @ 70 °C Operating -55 °C to +125 °C -55 °C to +155 °C Temp. Range Derated to +125 °C +155 °C Zero Load @ Max. Working 15 V 30 V 50 V 75 V 150 V 200 V 200 V 200 V Voltage Max. Overload 30 V 50 V 100 V 150 V 300 V 400 V 400 V 400 V Voltage Resistance ±1 %, ±5 % Tolerance 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω Temperature 10 Ω≤R<100 Ω 1 Ω≤R<10 Ω -2p0p0m~+/°5C0 0 ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C Coefficient -200~+600 ±1 % ±300 ppm/°C ppm/°C 10 Ω≤R≤1 MΩ 10 Ω≤R≤1 MΩ 10 Ω≤R≤1 MΩ 10 Ω≤R≤1 MΩ 10 Ω≤R≤1 MΩ 10 Ω≤R≤1 MΩ (E24 & E96 100 Ω≤R<1 MΩ 10 Ω≤R≤3 MΩ ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C Series) ±200 ppm/°C ±200 ppm/°C 1 MΩ<R≤10 MΩ 1 MΩ<R≤10 MΩ 1 MΩ<R≤10 MΩ 1 MΩ<R≤10 MΩ 1 MΩ<R≤10 MΩ 1 MΩ<R≤10 MΩ ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω 1 Ω≤R<10 Ω Temperature 10 Ω≤R<100 Ω 1 Ω≤R<10 Ω -2p0p0m~+/°5C0 0 ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C -200~+600 Coefficient ±300 ppm/°C ppm/°C 10 Ω≤R≤10 MΩ 10 Ω≤R≤10 MΩ 10 Ω≤R≤10 MΩ 10 Ω≤R≤10 MΩ 10 Ω≤R≤10 MΩ 10 Ω≤R≤10 MΩ ±5 % 100 Ω≤R≤1 MΩ 10 Ω≤R≤10 MΩ ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C (E24 Series) ±200 ppm/°C ±200 ppm/°C 10 MΩ<R≤20 MΩ 10 MΩ<R≤20 MΩ 10 MΩ<R≤20 MΩ 10 MΩ<R≤20 MΩ 10 MΩ<R≤20 MΩ 10 MΩ<R≤20 MΩ ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C Zero Ohm 50 milliohms max. Jumper Rated Current 0.5 A 1 A 2 A Max. Overload 1 A 2.5 A 5 A Current Environmental Characteristics Moisture Sensitivity Level ..........................................................1 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors Product Dimensions L Model L W C D T 0.40 ± 0.02 0.20 ± 0.03 0.10 ± 0.03 0.10 ± 0.03 0.13 ± 0.02 CR01005 (.016 ± .0008) (.008 ± .001) (.004 ± .001) (.004 ± .001) (.009 ± .0008) W 0.60 ± 0.03 0.30 ± 0.03 0.10 ± 0.05 0.15 ± 0.05 0.23 ± 0.03 CR0201 (.024 ± .001) (.012 ± .001) (.004 ± .002) (.006 ± .002) (.009 ± .001) 1.00 ± 0.05 0.50 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 0.32 ± 0.05 CR0402 C (.039 ± .002) (.020 ± .002) (.008 ± .004) (.010 ± .004) (.013 ± .002) 1.60 ± 0.10 0.80 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.45 ± 0.10 C CR0603 (.063 ± .004) (.031 ± .004) (.012 ± .008) (.012 ± .008) (.018 ± .004) 2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10 CR0805 T (.079 ± .004) (.049 ± .004) (.016 ± .008) (.016 ± .008) (.020 ± .004) D MM 3.10 ± 0.10 1.55 ± 0.10 0.50 ± 0.30 0.40 ± 0.20 0.55 ± 0.10 DIMENSIONS: CR1206 (INCHES) (.122 ± .004) (.061 ± .004) (.020 ± .012) (.016 ± .008) (.022 ± .004) 5.00 ± 0.15 2.50 ± 0.15 0.60 ± 0.30 0.50 ± 0.25 0.60 ± 0.10 CR2010 (.197 ± .006) (.098 ± .006) (.024 ± .012) (.020 ± .010) (.024 ± .004) 6.30 ± 0.20 3.20 ± 0.20 0.60 ± 0.30 0.50 ± 0.25 0.60 ± 0.10 CR2512 (.248 ± .008) (.126 ± .008) (.024 ± .012) (.020 ± .010) (.024 ± .004) Recommended Pad Layout RESISTOR Model a b c 0.15 ~ 0.20 0.50 ~ 0.70 0.20 ~ 0.25 CR01005 (.006 ~ .008) (.020 ~ .028) (.008 ~ .010) a c 0.25 ~ 0.30 0.70 ~ 0.90 0.30 ~ 0.40 b CR0201 (.010 ~ .012) (.028 ~ .035) (.012 ~ .016) 0.50 ~ 0.60 1.40 ~ 1.60 0.40 ~ 0.60 MM CR0402 (.020 ~ .024) (.055 ~ .063) (.012 ~ .024) DIMENSIONS: (INCHES) 0.70 ~ 0.90 2.00 ~ 2.20 0.80 ~ 1.00 CR0603 (.028 ~ .035) (.079 ~ .087) (.031 ~ .039) 1.00 ~ 1.40 3.20 ~ 3.80 0.90 ~ 1.40 CR0805 (.039 ~ .055) (.126 ~ .150) (.035 ~ .055) 2.00 ~ 2.40 4.40 ~ 5.00 1.20 ~ 1.80 CR1206 (.079 ~ .094) (.173 ~ .197) (.047 ~ .071) 3.30 ~ 3.70 5.70 ~ 6.50 2.30 ~ 3.50 CR2010 (.130 ~ .146) (.224 ± .256) (.091 ~ .138) 3.60 ~ 4.00 7.60 ~ 8.60 2.30 ~ 3.50 CR2512 (.142 ~ .157) (.299 ~ .339) (.091 ~ .138) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors Soldering Profile 275 <1>Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C < 1 > 255 °C 225 220 °C C) e (° 190 °C s6e0c o- n9d0s ur 175 at 150 °C Ramp Down er 6 °C/second p m e T 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 200 250 300 Time (Seconds) Derating Curve 100 80 %) o ( 60 ati R 70 wer 40 CR0402~CR2512 o P CR01005, CR0201 20 125 155 0 -55 20 40 60 80 100 120 140 160 Ambient Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors Performance Characteristics Test Procedure (IEC 60115-1) Test Limits ∆R ≤± (1 % + 0.05 Ω ) Remarks: Short Time Overload 2.5 x rated voltage for 5 seconds CR01005, CR0201 ..................± (3 % + 0.1 Ω) CR0402 ...................................± (2 % + 0.1 Ω) 0 Ω Jumper ................................50 mΩ or less 1 %: ≤± (1 % + 0.05 Ω) 3.0 x rated voltage or max. overloading voltage, 5 %: ≤± (3 % + 0.1 Ω) 1 sec. “ON”, 25 sec. “OFF”,10,000 cycles Remarks: Intermittent Overload Remarks: CR01005, CR0201 ..................± (5 % + 0.1 Ω) CR01005, CR0201 .....................................................not applicable CR0402 ...................................± (3 % + 0.1 Ω) CR0402 ...............................2.5 x rated continuous working voltage 0 Ω Jumper ..............................100 mΩ or less 1 %: ≤± (1 % + 0.05 Ω) 5 %: ≤± (3 % + 0.1 Ω) 1000 hours at rated voltage, 70 ℃ , Remarks: Load Life 1.5 hours “ON “, 0.5 hour “OFF” CR01005, CR0201 ..................± (5 % + 0.1 Ω) CR0402 ...................................± (3 % + 0.1 Ω) 0 Ω Jumper ..............................100 mΩ or less 1 %: ≤± (1 % + 0.05 Ω) 5 %: ≤± (3 % + 0.1 Ω) 1000 hours at rated voltage , 40±2 ℃, Remarks: Load Life Humidity 90~95 % RH 1.5 hours “ON “, 0.5 hour “OFF” CR01005, CR0201 ..................± (5 % + 0.1 Ω) CR0402 ...................................± (3 % + 0.1 Ω) 0 Ω Jumper ..............................100 mΩ or less 1 %: ≤± (0.5 % + 0.05 Ω) 5 %: ≤± (1 % + 0.05 Ω) Rapid Change of Temperature -55 ℃ (30 min.) / +155 ℃ (30 min.) 5 cycles Remarks: CR01005, CR0201 ..................± (3 % + 0.1 Ω) 0 Ω Jumper ................................50 mΩ or less 1 %: ≤± (0.5 % + 0.05 Ω) 5 %: ≤± (1 % + 0.05 Ω) Remarks: Resistance to Solder Heat 270±5 ℃, 10±1 sec. CR01005 ...............................± (3 % + 0.05 Ω) CR0201 ...................................± (3 % + 0.1 Ω) 0 Ω Jumper ................................50 mΩ or less 245±5 ℃ solder, 2±0.5 seconds dwell Over 95 % of termination must be covered Solderability Solder: Sn96.5 / Ag3.0 / Cu0.5 with solder 1 %: ≤± (1 % + 0.05 Ω) 155±5 ℃ for 96±4 hours 5 %: ≤± (1 % + 0.05 Ω) Resistance to Dry Heat Remarks: Remarks: CR0201 .............................................................................125±5 °C CR01005, CR0201 ..................± (1 % + 0.1 Ω) 0 Ω Jumper ................................50 mΩ or less 1 %: ≤± (0.5 % + 0.05 Ω) 5 %: ≤± (2 % + 0.1 Ω) 3 mm deflection Remarks: Bending Remarks: CR01005, CR0201 ..................± (3 % + 0.1 Ω) CR2010, CR2512 ....................................................2 mm deflection CR0402 ...................................± (2 % + 0.1 Ω) 0 Ω Jumper ................................50 mΩ or less 500 V, 1 minute Remarks: No abnormalities such as flashover, burning or Dielectric Withstanding Voltage CR01005, CR0201 ....................................................................50 V dielectric breakdown shall appear CR0402 ...................................................................................300 V 100 V, 1 minute ≥1 GΩ Insulation Resistance Remarks: Remarks: CR0201 .....................................................................................50 V CR01005 ..........................................≥100 MΩ) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors How to Order CR 1206 - F X - 1003 E LF Model (CR = Chip Resistor) Size 01005 = 01005 size 0201 = 0201 size 0402 = 0402 size 0603 = 0603 size 0805 = 0805 size 1206 = 1206 size 2010 = 2010 size 2512 = 2512 size Resistance Tolerance F = ±1 % J = ±5 % TCR (ppm/°C) – See Electrical Characteristics Chart X = ±100 W = ±200 V = ±300 Z = ±400 / = Used for zero Ω (jumper) and values from 1 Ω through 9.76 Ω. Resistance Value For 1 % Tolerance: <100 Ω .....“R” represents decimal point (example: 24R3 = 24.3 Ω). ≥100 Ω ....First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5K Ω). For 5 % Tolerance: <10 Ω .......“R” represents decimal point (example: 4R7 = 4.7 Ω). ≥10 Ω .......First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470K Ω; 000 = Jumper). Packaging G = Paper Tape (10,000 pcs.) on 7-inch Plastic Reel – CR01005, CR0201, CR0402 E = Paper Tape (5,000 pcs.) on 7-inch Plastic Reel – CR0603, CR0805, CR1206 or Embossed Tape (4,000 pcs) on 7-inch Plastic Reel – CR2010, CR2512 Termination LF = Tin-plated (RoHS Compliant) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors EIA-96 Marking for CR0603, 1 % Marking Explanation 0 Code R Value Code R Value Code R Value Code R Value 0Ω JUMPER: 00 01 100 25 178 49 316 73 562 0 02 102 26 182 50 324 74 576 0 03 105 27 187 51 332 75 590 CR01005, CR0201, 04 107 28 191 52 340 76 604 CR0402: No marking. 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 CR0603, CR0805, CR1206, CR2010, CR2512: 103 08 118 32 210 56 374 80 665 • E-24: 3 digits; first two digits are significant, 110033 09 121 33 215 57 383 81 681 third digit is number of 103 zeros to follow. 10 124 34 221 58 392 82 698 103 Letter R is decimal (Value = 10K Ω) 11 127 35 226 59 402 83 715 point. 4422 12 130 36 232 60 412 84 732 • E-96: 4 digits; first 44442222 13 133 37 237 61 422 85 750 three digits are 4422 significant, fourth digit 14 137 38 243 62 432 86 768 is number of zeros to 4422 follow. (Value = 44.2K Ω) 15 140 39 249 63 442 87 787 Letter R is decimal 10C 16 143 40 255 64 453 88 806 point. 1100CC 10C 17 147 41 261 65 464 89 825 • CR0603 E-96: EIA-96 10C 18 150 42 267 66 475 90 845 marking (see table). 19 154 43 274 67 487 91 866 (Value = 12.4K Ω) 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Multipliers Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors Packaging Dimensions (Conforms to EIA RS-481A) BOTTOM TAPE TOP TAPE 1.50 ± 0.10 DIA. (.059 ± .004) E PAPER TAPE F W (2 mm PITCH) RESISTOR B PAPER TAPE T A P1 P2 P0 DIRECTION OF UNREELING BOTTOM TAPE TOP TAPE 1.50 ± 0.10 DIA. (.059 ± .004) E PAPER TAPE F W (4 mm PITCH) RESISTOR B PAPER TAPE T A P1 P2 P0 DIRECTION OF UNREELING EMBOSSED TAPE TOP TAPE (1.0.5509)MIN. DIA. (1.0.5509 ±± 0.0.1004)DIA. E EMBOSSED TAPE F W (4 mm PITCH) RESISTOR B MM DIMENSIONS: T A P1 P2 P0 DIRECTION OF UNREELING (INCHES) Model Tape Type A B W F E P1 P2 P0 T Paper Tape 0.24 ± 0.05 0.45 ± 0.10 0.15 ± 0.10 CR01005 (2 mm pitch) (.010 ± .002) (.018 ± .004) (.006 ± .004) 0.37 ± 0.05 0.67 ± 0.10 2.00 ± 0.10 0.37 ± 0.10 CR0201 (.014 ± .002) (.026 ± .004) (.079 ± .004) (.015 ± .004) Paper Tape (2 mm pitch) 0.70 ± 0.05 1.20 ± 0.05 0.45 ± 0.10 CR0402 (.028 ± .002) (.047 ± .002) (.018 ± .004) 8.00 ± 0.20 3.50 ± 0.05 (.315 ± .008) (.138 ± .002) 1.10 ± 0.10 1.90 ± 0.10 0.64 ± 0.10 CR0603 (.043 ± .004) (.075 ± .004) (.025 ± .004) 1.75 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 (.069 ± .004) (.079 ± .002) (.157 ± .004) Paper Tape (4 1.60 ± 0.15 2.40 ± 0.20 0.84 ± 0.10 CR0805 mm pitch) (.063 ± .006) (.094 ± .008) (.033 ± .004) 2.00 ± 0.15 3.60 ± 0.20 4.00 ± 0.10 0.84 ± 0.10 CR1206 (.079 ± .006) (.142 ± .008) (.157 ± .004) (.033 ± .004) 2.80 ± 0.20 5.30 ± 0.20 0.85 ± 0.15 CR2010 Embossed (.110 ± .008) (.209 ± .008) (.033 ± .006) 12.00 ± 0.20 5.50 ± 0.05 Tape (4 mm pitch) 3.60 ± 0.20 6.90 ± 0.20 (.472 ± .008) (.217 ± .002) 0.85 ± 0.15 CR2512 (.142 ± .008) (.272 ± .008) (.033 ± .006) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR Series - Thick Film Chip Resistors Packaging Dimensions (Conforms to EIA RS-481A) W C DIA. B DIA. MM T DIMENSIONS: (INCHES) A DIA. Model Packaging Quantity A B C W T CR01005 CR0201 10K pcs./reel CR0402 9.0 ± 1.0 11.5 ± 1.0 (.354 ± .039) (.453 ± .039) CR0603 178 ± 2.0 60 ± 1.0 13.0 ± 1.0 (7.008 ± .079) (2.362 ± .039) (.512 ± .039) CR0805 5K pcs./reel CR1206 CR2010 13.0 ± 1.0 15.5 ± 1.0 4K pcs./reel (.512 ± .039) (.610 ± .039) CR2512 REV. 12/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R