DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 ◆ Product Description ・9.5×5.7mm Max.(L×W), 5.1mm Max. Height . ◆ Feature ・Ideally used in CAN BUS ,AV,OA equipment. ・RoHS Compliance ◆ Dimensions (mm) 1 5 0.15 . 1 0 . ± 0 ± 3 . 4 1 .5 2 2 . 0 ± 5 . 5 7.0±0.2 5.08 MAX. 6.4±0.2 9.5 MAX. ＊ Dimension does not include solder used on coil. ◆ Land Pattern (mm) ◆ Schematics (Bottom) 1.6 8 . 1 ② ③ ② ③ or 4 5 2. ① ④ ① ④ 6.7 MARK OF POLARITY MARK OF POLARITY 9.9 ◆ Specification (For CAN bus) Insulation D.C.R. (Ω) Impedance (Ω) Withstanding Resistance (1-2)at 20℃ Part Name. Stamp (L1,L2 Parallel) Voltage (coil-coil) (MΩ)(Coil-Coil) (3-4) short (10～100MHz) (5sec) (DC80V 1min) ※ CPFC74NP-CB1ØM4 C10M 1000 MIN. 100 MIN. 200V DC 0.6 MAX. CPFC74NP-CBØ8M6 C08M 800 MIN. 100 MIN. 200V DC 0.5 MAX. ※ D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2

DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 ◆ Specification (For Power supply) Rated Insulation Withstanding D.C.R. (mΩ) Impedance (Ω) Current Resistance Voltage (1-2)at 20℃ Part Name. Stamp (L1,L2 Parallel) (1-2)(A) (MΩ)(Coil-Coil) (Coil-Coil) (3-4) Short (3-4) Short (DC100V 1min.) (5sec) ※2 ※1 700 MIN. CPFC74NP-PS1ØH2A15 P15H 10 MIN. D.C.125V 120 1.5 (100 MHz) 200 MIN. CPFC74NP-PSØ2H2A2Ø P20H 10 MIN. D.C.125V 120 2.0 (20～300MHz) 300 MIN. CPFC74NP-PSØ3H2A25 P25H 10 MIN. D.C.125V 120 2.5 (160 MHz) CPFC74NP-PSØ1H2A3Ø P30H 100 MIN. 10 MIN. D.C.125V 60 3.0 ※1: Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). ※2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2