CPCL, CPCC, CPCP, CPCF Vishay Dale Wirewound/Metal Film Resistors, Commercial Power, Vertical Mount FEATURES • Board space saving due to vertical design • Meets or exceeds requirements of EIA Standard RS-344 • High power to size ratio • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package • Compliant to RoHS Directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING RESISTANCE RANGE TOLERANCE WEIGHT (typical) MODEL MODEL P70 °C W  ± % g CPCL02 CPCL-2 2 0.01 to 0.10 5, 10 3.5 CPCC02 CPCC-2 2 0.1 to 500 5, 10 3.5 CPCP02 CPCP-2 2 0.1 to 4K 1, 5 3.5 CPCF02 CPCF-2 2 501 to 150K 1, 5, 10 3.5 CPCL03 CPCL-3 3 0.01 to 0.10 5, 10 5.5 CPCC03 CPCC-3 3 0.1 to 800 5, 10 5.5 CPCP03 CPCP-3 3 0.1 to 5K 1, 5 5.5 CPCF03 CPCF-3 3 801 to 150K 1, 5, 10 5.5 CPCL05 CPCL-5 5 0.01 to 0.10 5, 10 6.9 CPCC05 CPCC-5 5 0.1 to 800 5, 10 6.9 CPCP05 CPCP-5 5 0.1 to 5K 1, 5 6.9 CPCF05 CPCF-5 5 801 to 150K 1, 5, 10 6.9 CPCC07/CPCF07 (1) CPCC07/CPCF07 7 0.1 to 50K 5, 10 9.2 CPCL10 CPCL-10 10 0.01 to 0.10 5, 10 14.3 CPCC10 CPCC-10 10 0.1 to 1.5K 5, 10 14.3 CPCP10 CPCP-10 10 0.1 to 8K 1, 5 14.3 Notes • Non-inductively wound types are available on the CPCP series signified by a 1 in the special character on part number such as CPCP0510R00FB321. Max. resistance value will be ½ of the standard CPCP. (1) CPCx07 is only available as CPCC or CPCF High Volume style which is noted by using E66 package code and can be found on datasheet www.vishay.com/doc?30116. TECHNICAL SPECIFICATIONS PARAMETER UNIT CPCLxx CPCCxx CPCPxx CPCFxx ± 300 = 1.0  and above, ± 20 = 10  and above, ± 100 = 0.05  to 0.1  ± 50 all values, Temperature Coefficient ppm/°C ± 600 = 0.1  to 0.99 , ± 50 = 1.0  to 9.9  ± 400 = 0.01  to 0.049  ± 400 for CPCF07 ± 400 for CPCC07 ± 90 = 0.1  to 0.99  Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C - 65 to + 275 - 65 to + 225 Terminal Strength lb 10 minimum Dielectric Withstanding Voltage V 1000 AC GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CPCC0515R00JB32 C P C C 0 5 1 5 R 0 0 J B 3 2 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical R = Decimal F = ± 1.0 % E32 = Lead (Pb)-free two layer bulk (Dash number) Specifications Global K = Thousand H = ± 3.0 % E01 = Lead (Pb)-free skin pack (up to 3 digits) E66 = Lead (Pb)-free bulk (CPCx07 only) Model column for R1500 = 0.15  J = ± 5.0 % From 1 to 999 options) 1K500 = 1500  K = ± 10.0 % B32 = Tin/lead two layer bulk as applicable J01 = Tin/lead skin pack Historical Part Numbering example: CPCC-5 15  5 % B32 CPCC-5 15  5 % B32 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 30218 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com Revision: 17-Feb-11 1

CPCL, CPCC, CPCP, CPCF Vishay Dale Wirewound/Metal Film Resistors, Commercial Power, Vertical Mount DIMENSIONS in inches [millimeters] C 0.177+-0 0.0.03798 [4.50 + 1 . 9 8 ] -0.991 E B D A DIMENSIONS in inches [millimeters] GLOBAL MODEL A B C D E + 0.043 [1.09] ± 0.031 [0.794] ± 0.031 [0.794] ± 0.005 [0.127] ± 0.040 [1.02] - 0.012 [0.305] CPCL02, CPCC02 0.807 [20.50] 0.433 [11.00] 0.276 [7.01] 0.032 [0.813] 0.197 [5.00] CPCP02, CPCF02 CPCL03, CPCC03 0.984 [24.99] 0.472 [11.99] 0.315 [8.00] 0.032 [0.813] 0.197 [5.00] CPCP03, CPCF03 CPCL05, CPCC05 1.003 [25.48] 0.512 [13.00] 0.354 [8.99] 0.032 [0.813] 0.197 [5.00] CPCP05, CPCF05 1.535 ± 0.059 0.512 ± 0.043 0.354 ± 0.043 0.032 ± 0.005 0.197 + 0.079/- 0.039 CPCC07, CPCF07 [39.00 ± 1.50] [13.00 ± 1.10] [9.00 ± 1.10] [0.813 ± 0.127] [5.00 + 2.0/- 1.0] CPCL10, CPCP10 0.040 [1.02] 1.372 [34.85] 0.633 [16.08] 0.485 [12.32] 0.290 [7.37] CPCC10 0.036 [0.914] MATERIAL SPECIFICATIONS Part Marking: DALE, model, wattage, value, tolerance, date CPCF: Element: Metal film - nickel-chrome alloy (CPCF07 code is nickel oxide) CPCL: Element: Self-supporting copper-nickel alloy or Core: Alumina ceramic nickel-chrome alloy, depending on resistance value Body: Steatite ceramic case with inorganic potting Body: Steatite ceramic case with inorganic potting compound compound End Caps: Brass alloy Terminals: Tinned copper Terminals: Solder-coated copper (CPCF07 is tinned copper) CPCC: Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value DERATING Core: Woven fiberglass (CPCC07 is alumina ceramic) % 120 Body: Steatite ceramic case with inorganic potting N compound R I 100 End Caps: Tin plated steel WE CPCL Terminals: Tinned copper PO 80 CCPPCCPC D 60 CPCP: Element: Copper-nickel alloy or nickel-chrome TE alloy, depending on resistance value RA 40 CPCF Core: Ceramic 20 Body: Steatite ceramic case with inorganic potting compound 0 End Caps: Stainless steel - 65 - 25 25 75 125 175 225 275 Terminals: Tinned Copperweld® 70 AMBIENT TEMPERATURE IN °C Note • CPCC07 and CPCF07 deratings begin at 40 °C in lieu of 70 °C PERFORMANCE CPCC, CPCL, CPCF TEST CONDITIONS OF TEST CPCP TEST LIMITS TEST LIMITS - 55 °C to + 275 °C (+ 225 °C for CPCF), Thermal Shock ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R 5 cycles, 30 min dwell time Short Time Overload 5 x rated power for 5 s ± (2.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (0.1 % + 0.05 ) R ± (2.0 % + 0.05 ) R Low Temperature Storage - 65 °C, full rated working voltage for 45 min ± (2.0 % + 0.05 ) R ± (3.0 % + 0.05 ) R Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Terminal Strength 5 s to 10 s 10 pound pull test ± (1.0 % + 0.05 ) R ± (1.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder up to body ± (1.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30218 2 Revision: 17-Feb-11

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000