CP www.vishay.com Vishay Dale Wirewound / Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES • High performance for low cost • Meets or exceeds requirements of EI A Standard RS-344 Available • High power to size ratio • Ceramic cases are available with circuit board stand-offs (designated with a -3 model ending) • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package Available • Material categorization: for definitions of compliance please se e Available www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING WEIGHT RESISTANCE RANGE  RESISTANCE RANGE  TOLERANCE GLOBAL MODEL P (TYPICAL) 40 °C WIREWOUND (1) METAL OXIDE (1)(2) ± % W g CP0002 2 0.1 to 1K 100 to 30K 5, 10 2.0 CP0002...3 2 0.1 to 1K 100 to 30K 5, 10 2.2 CP0003 3 0.1 to 2K 150 to 33K 5, 10 3.4 CP0003...3 3 0.1 to 2K 150 to 33K 5, 10 3.6 CP0005 5 0.1 to 2.4K 150 to 50K 5, 10 4.8 CP0005...3 5 0.1 to 2.4K 150 to 50K 5, 10 5.0 CP0007 7 0.1 to 7K - 5, 10 6.8 CP0007...3 7 0.1 to 7K - 5, 10 7.0 CP0010 10 0.1 to 11K - 5, 10 9.5 CP0010...3 10 0.1 to 11K - 5, 10 9.9 CP0015 15 0.1 to 11K - 5, 10 16.8 CP0015...3 15 0.1 to 11K - 5, 10 17.4 CP0020 20 0.1 to 16K - 5, 10 22.8 CP0020...3 20 0.1 to 16K - 5, 10 23.6 CP0022 22 0.1 to 16K - 5, 10 24.5 CP0022...3 22 0.1 to 16K - 5, 10 25.3 CP0025 25 0.1 to 16K - 5, 10 37.0 Notes (1) To specifically order a wirewound sub-assembly for resistance values that overlap between the wirewound and metal oxide technologies, the model will be a CPxxxx...85 for standard body and CPxxxx...91 for body with stand-offs. To specifically order a metal oxid e sub-assembly for resistance values that overlap between the wirewound and metal oxide technologies, the model will be a CPxxxx...100 for a standard body and CPxxxx...101 for body with stand-offs. If no dash type is specified, either technology may be supplied (2) Metal oxide versions are not recommended for new designs TECHNICAL SPECIFICATIONS PARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS Temperature Coefficient ppm/°C ± 300 1  and above; ± 600 below 1  ± 300 (CP0002 to CP0005) Short Time Overload - 5 x rated power for 5 s 5 x rated power for 5 s Terminal Strength lb 10 minimum 10 minimum Operating Temperature Range °C -65 to +275 -65 to +225 Dielectric Withstanding Voltage V 1000 1000 AC Maximum Working Voltage V (P x R)1/2 (P x R)1/2 Note • Wirewound CP resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and resistiv e functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using the e-mail address at the bottom of this page for design assistance Revision: 06-Feb-2020 1 Document Number: 30213 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CP www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CP000515R00JE143 C P 0 0 0 5 1 5 R 0 0 J E 1 4 3 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical R = decimal J = ± 5.0 % E14 = lead (Pb)-free bulk pack (Dash number) Specifications Global K = thousand K = ± 10.0 % E31 = lead (Pb)-free four layer bulk pack (Up to 3 digits) Model column for options) R1500 = 0.15  From 1 to 999 B14 = bulk pack 1K500 = 1500  B31 = four layer bulk pack as applicable Historical Part Numbering Example: CP-5-3 15  5 % B14 CP-5-3 15  5 % B14 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING DIMENSIONS in inches [millimeters] CPxxxx CPxxxx...3 F A typical F A E B typical D C C 0[3.1.1285] E B typical DIMENSIONS in inches [millimeters] GLOBAL A (1) B C D E F MODEL ± 0.031 ± 0.031 ± 0.031 ± 0.031 ± 0.002 [0.050] WIREWOUND METAL OXIDE [0.794] [0.794] [0.794] [0.794] WIREWOUND METAL OXIDE ± 0.125 [3.175] MINIMUM CP0002 0.688 [17.46] 0.250 [6.35] 0.250 [6.35] - 0.032 [0.813] 0.0236 [0.600] 1.500 [38.10] 0.750 [19.05] CP0002...3 0.688 [17.46] 0.250 [6.35] 0.250 [6.35] 0.313 [7.94] 0.032 [0.813] 0.0236 [0.600] 1.500 [38.10] 0.750 [19.05] CP0003 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0003...3 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0005 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0005...3 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] 0.406 [10.32] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0007 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] - 1.500 [38.10] - CP0007...3 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] - 1.500 [38.10] - CP0010 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] - 1.500 [38.10] - CP0010...3 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] - 1.500 [38.10] - CP0015 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] - 1.500 [38.10] - CP0015...3 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] - 1.500 [38.10] - CP0020 (2) 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] - 1.500 [38.10] - CP0020...3 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] - 1.500 [38.10] - CP0022 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] - 1.500 [38.10] - CP0022...3 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] - 1.500 [38.10] - CP0025 2.500 [63.50] 0.625 [15.87] 0.625 [15.87] - 0.040 [1.016] - 1.500 [38.10] - Notes (1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side (2) Dimensions for the metal oxide are: A = 2.360 [59.94], B = 0.570 [14.48], C = 0.530 [13.46], E = 0.032 [0.813], F = 1.000 [25.40] Revision: 06-Feb-2020 2 Document Number: 30213 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CP www.vishay.com Vishay Dale MATERIAL SPECIFICATIONS DERATING Element: wirewound = copper-nickel alloy or nickel-chrome %120 alloy, depending on resistance value R IN 100 metal oxide = high temperature fired metal oxide film E W Core: wirewound = woven fiberglass PO 80 metal oxide = alumina ceramic D E T Body: steatite ceramic case with inorganic potting A 60 R compound 40 Wirewound End Caps: tin plated steel Terminals: tinned copper 20 Metal oxide Part Marking: Dale, model, wattage, value, tolerance, date code 0-55 -25 25 75 125 175 225 275 AMBIENT TEMPERATURE IN °C 40 PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (EIA-344) Thermal Shock -55 °C to +275 °C (+225 °C for metal oxide), 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS, for 1 min ± (2.0 % + 0.05 ) R Low Temperature Storage -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (4.0 % + 0.05 ) R Revision: 06-Feb-2020 3 Document Number: 30213 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: CP00152K700JB14