Description Material Finish REVISIONS Body Brass Nickel 0.126 0.272 0.276 REV DESCRIPTION DATE APPV Socket BE CU Gold [3.20] [6.90] [7.00] B Updated footprint and dimensions; Added new title block 29-JUN-12 BPM RG-58 Cable Pin Insulator PTFE N/A Washer Brass Nickel 0.500 0.984 [12.70] [25.00] Nut Brass Nickel Spacer PTFE N/A Shield Sleeve Brass Nickel RECOMMENDED CABLE STRIPPING DIMENSIONS Ø0.256 Ø0.287 Retaining Nut Brass Nickel [6.50] [7.30] 1/4-36UNS-2A Crimp Ring Brass Nickel THREADS Heat Shrink Polyolefin Black CRIMP RING HEAT SHRINK Ø0.402 Ø0.177 Ø0.049 Ø0.177 [10.20] [4.50] [1.24] [4.50] H0.315 0.354 1/4-36UNS-2B [8.00] [9.00] THREADS Ø0.254 SOCKET 0.446 0.276 [6.50] 0.035 [11.40] [7.00] [0.90] 0.020 [0.50] 0.636 SPACER 0.065 0.234 [16.30] [1.65] [6.00] WASHER 0.996 NUT [25.30] SIDE VIEW RECOMMENDED MOUNTING HOLE WASHER RETAINING NUT PIN INSULATOR SPACER CRIMP RING SOCKET SHIELD SLEEVE STRIPPED CABLE SHRINK WRAP NUT MAIN BODY NOTES: (UNLESS OTHERWISE SPECIFIED) CONSMA005 ASSEMBLY INSTRUCTIONS 1. ALL DIMENSIONS ARE IN INCHES [mm]. 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE. 2. DIMENSIONS APPLY AFTER FINISHING. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM. 1. Strip cable to recommended dimensions. 2. Slip heat shrink and crimp ring onto stripped cable. : THIS DRAWING CONTAINS PROPRIETARY INFORMATION 159 ORT LANE THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE 3. Insert the stripped cable through the retaining nut, shield sleeve, MERLIN, OR 97532 TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS and spacer. DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE TITLE: 4. Solder the socket to the center conductor. EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS 5. Insert the socket into the pin insulator, then screw the main body onto DESIGNATED AGENTS. SMA FEMALE BULKHEAD MOUNT the retaining nut. MATERIAL: TOLERANCES: PROJECTION: CABLE END CRIMP FOR RG58 CABLE 6. Wrap the braid around the tail of the body and crimp the ring with a .020 [0.50]-.200 [5.00]= .008 [0.20] .200 [5.00]-1.200 [30.00]= .016 [0.40] 0.213” hex crimp tool (or one labeled for use with RG-58 cable). 1.20 [30.0]-4.75 [120.0]= .024 [0.60] SIZE DWG. NO. REV 7. Use heat shrink to cover crimp. 4.75 [120.0]-12.40 [315.0]= .040 [1.0] ANGLES: 1 8. Use the nut and washer to secure the connector to a case. FINISH: DRAWN: B.MURPHY DT: 29-JUN-12 CONSMA005-R58 B ENGR: S.HOGAN DT: 29-JUN-12 SCALE: 2:1 DO NOT SCALE DRAWING SHEET 1 OF 1 LDCFDLT_A

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L inx Technologies: CONSMA005-R58