Photocoupler Product Data Sheet CNY17F-1 THRU CNY17F- 4 SERIES Spec No. :DS-70-99-0032 Effective Date: 08/22/2017 Revision: D LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto

Photocoupler CNY17F series 1. DESCRIPTION 1.1 Features (cid:1) Current transfer ratio (CTR : MIN. 40% at I = 10mA, V = 5V, T =25oC) F CE A (cid:1) High collector-emitter voltage V = 70V CEO (cid:1) High input-output isolation voltage Viso = 5,000Vrms (cid:1) Response time (tr : TYP. 5m s at VCE = 10V, IC = 2mA, RL = 100W ) (cid:1) Dual-in-line package : CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4 (cid:1) Wide lead spacing package : CNY17F-1M, CNY17F-2M, CNY17F-3M, CNY17F-4M (cid:1) Surface mounting package : CNY17F-1S, CNY17F-2S, CNY17F-3S, CNY17F-4S (cid:1) Tape and reel packaging : CNY17F-1S-TA, CNY17F-2S-TA, CNY17F-3S-TA, CNY17F-4S-TA CNY17F-1S-TA1, CNY17F-2S-TA1, CNY17F-3S-TA1, CNY17F-4S-TA1 (cid:1) Safety approval * UL approved (No. E113898) * TUV approved (No. R9653630) * CSA approved (No. CA91533-1) * FIMKO approved (No. 193422-01) * VDE approved (No. 40015248 ) * BSI approved (No. 9018-9) * CQC approved (No.CQC11001061921-2) (cid:1) Creepage distance > 8.0 mm ; Clearance > 8.0 mm (cid:1) The relevant models are the models Approved by VDE according to DIN EN 60747-5-5 Approved Model No.: CNY17F-1-V, CNY17F-2-V, CNY17F-3-V, CNY17F-4-V CNY17F-1M-V, CNY17F-2M-V, CNY17F-3M-V, CNY17F-4M-V CNY17F-1S-V, CNY17F-2S-V, CNY17F-3S-V, CNY17F-4S-V CNY17F-1STA-V, CNY17F-2STA-V, CNY17F-3STA-V, CNY17F-4STA-V CNY17F-1STA1-V, CNY17F-2STA1-V, CNY17F-3STA1-V, CNY17F-4STA1-V VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5) (cid:1) Operating isolation voltage VIORM : 850V (Peak) (cid:1) Transient voltage VTR : 6000V (Peak) (cid:1) Pollution : 2 (According to VDE 0110-1 : 1997-04) (cid:1) Clearances distance (Between input and output) : 7.0mm (MIN.) Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 1/16

Photocoupler CNY17F series (cid:1) Creepage distance (Between input and output) : 7.0mm (MIN.) (cid:1) Isolation thickness between input and output : 0.4mm (MIN.) (cid:1) Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. (cid:1) Indication of VDE approval prints " " on sleeve package. (cid:1) RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC). (cid:1) ESD pass HBM 8000V/MM2000V (cid:1) MSL class1 1.2 Applications (cid:1) Power Supply regulators (cid:1) Digital logic inputs (cid:1) Microprocessor inputs (cid:1) Appliance Sensor Systems (cid:1) Industrial Controls Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 2/16

Photocoupler CNY17F series 2. PACKAGE DIMENSIONS 2.1 CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4 2.2 CNY17F-1M, CNY17F-2M, CNY17F-3M, CNY17F-4M Notes : Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 3/16

Photocoupler CNY17F series 1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ). 4. VDE option. 5. Model No.: CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4 * All dimensions in millimeters. Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 4/16

Photocoupler CNY17F series 2.3 CNY17F-1S, CNY17F-2S, CNY17F-3S, CNY17F-4S Notes : 1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ). 4. VDE option. 5. Model No.: CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4 * All dimensions in millimeters. Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 5/16

Photocoupler CNY17F series 3. TAPING DIMENSIONS 3.1 CNY17F-1S-TA, CNY17F-2S-TA, CNY17F-3S-TA, CNY17F-4S-TA 3.2 CNY17F-1S-TA1, CNY17F-2S-TA1, CNY17F-3S-TA1, CNY17F-4S-TA1 Dimension in mm Description Symbol (inch) Tape wide W 16±0.3 (0.63) Pitch of sprocket holes P 4±0.1 (0.15) 0 F 7.5±0.1 (0.295) Distance of compartment P 2±0.1 (0.079) 2 Distance of compartment to P 12±0.1 (0.472) compartment 1 Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C Package Type CNY17F series 6/16 Quantities (pcs) 1000

Photocoupler CNY17F series 3.3 Quantities Per Reel Package Type CNY17F series Quantities (pcs) 1000 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Forward Current I 60 mA F Input Reverse Voltage V 6 V R Power Dissipation P 100 mW Collector - Emitter Voltage V 70 V CEO Emitter - Collector Voltage V 7 V ECO Output Collector Current I 150 mA C Collector Power Dissipation P 150 mW C Total Power Dissipation P 250 mW tot *1 Isolation Voltage V 5000 V iso rms Operating Temperature Topr -55 ~ +100 °C Storage Temperature Tstg -55 ~ +150 °C *2 Soldering Temperature Tsol 260 °C *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 7/16

Photocoupler CNY17F series 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.45 1.65 V IF=60mA INPUT Reverse Current IR — — 10 m A VR=6V Terminal Capacitance Ct — — 100 pF V=0, f=1KHz Collector Dark Current ICEO — — 50 nA VCE=10V, IF=0 Collector-Emitter IC=0.1mA BVCEO 70 — — V OUTPUT Breakdown Voltage IF=0 Emitter-Collector Breakdown IE=10m A BVECO 7 — — V Voltage IF=0 CNY17F-1 40 — 80 Current CNY17F-2 63 125 IF=10mA *Transfer CTR % CNY17F-3 100 200 VCE=5V Ratio CNY17F-4 160 — 320 Collector-Emitter IF=10mA VCE(sat) — — 0.3 V TRANSFER Saturation Voltage IC=2.5mA CHARACTERISTICS DC500V Isolation Resistance Riso 100 — — GW 40 ~ 60% R.H. Floating Capacitance Cf — — 2 pF V=0, f=1MHz Response Time (Rise) tr — 5 10 m s VCE=10V, IC=2mA Response Time (Fall) tf — 5 10 m s RL=100W I *CTR= C · 100% I F Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 8/16

Photocoupler CNY17F series 4.3 ISOLATION SPECIFICATION ACCORDING TO VDE Parameter Symbol Conditions Rating Unit Remark Class of environmental test - DIN IEC68 55/100/21 - Pollution - DIN VDE0110 2 - Maximum Operating V - 850 V IORM PEAK Isolation Voltage Partial Discharge Test Diagram 1 tp=60s, qc<5pC 1275 V Refer to the Diagram PEAK Voltage (Between Input Vpr 1, 2 Diagram 2 tp=1s, qc<5pC 1594 V and Output) PEAK Maximum Over-voltage V t = 10s 6000 V INITIAL INI PEAK Safety Maximum Ratings 1) Case Temperature Tsi I = 0, Pc = 0 175 oC F Refer to the 2) Input Current Isi Pc=0 400 mA Figure 1, 3 3) Electric Power (Output or Total Psi - 700 mW Power Issipation) Ta=Tsi MIN.109 Isolation Resistance (Test Voltage Between RISO Ta=Topr(MAX.) MIN.1011 W Input and Output : DC500V) Ta=25 oC MIN.1012 Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of DIN EN 60747-5-5 * Please don't carry out isolation test (Viso) over V ,This product deteriorates INITIAL isolation characteristics by partial discharge due to applying high voltage Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 9/16

Photocoupler CNY17F series (ex. V ). And there is possibility that this product occurs partial discharge in INITIAL operating isolation voltage (V ) IORM 4.4 PARTIAL DISCHARGE TEST METHOD Method (A) for type testing and random testing. V V INTIAL V pr t1, t2 =1 to 10s t3, t4 =1s VIORM tp (Partial Discharge Measuring Time)=60s tb =62s tini =10s t t3 tp t4 t1 tini t2 tb Method (B) for routine testing. V V pr t3, t4 =0.1s tp (Partial Discharge Measuring Time)=1s tb =1.2s V IORM t t3 tp t4 tb The partial discharge level shall not exceed 5 pc during the partial discharge measuring time interval t under the test p conditions shown above. Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 10/16

Photocoupler CNY17F series 5. CHARACTERISTICS CURVES Fig.1 Forward Current vs. Fig.2 Collector Power Dissipation vs. Ambient Temperature Ambient Temperature 80 200 )W m )Am 60 (cnP 150 t I rrrrcFoaduenw (F 4200 t rrceopoedwiitisspao 10500 0 lloC 0 -55 -25 0 25 50 75 100 125 -55 -25 0 25 50 75 100 125 Ambient temperature Ta ( oC) Ambient temperature Ta ( oC) Fig.3 Collector-emitter Saturation Fig.4 Forward Current vs. Voltage vs. Forward Current Forward Voltage 6 500 lltcoeoCitt tti ltr-rrsveeauaonoagem V t ()()saV 12345 Ic=23150mmmm.5AAAAmA Ta=25 oC rFow t I rrr()caduenAmF12001250025000 Ta=7550 o oCC -22055 o Co oCC 0 1 0 2.5 5.0 7.5 10.0 12.5 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward current I F (mA) Forward voltage VF (V) Fig.5 Current Transfer Ratio vs. Fig.6 Collector Current vs. Forward Current Collector-emitter Voltage 200 45 uCirrt trfr rt ()enanseaoTCR% 11111248024686000000000 VTRaC =E ==25550V oC0k 100k llt rrrccoeoueCt I ()cnAm 112233450505050 I F =30mA 20mA10m25AmmAATPac=(M25A oXC.) 0 0 0 2 5 10 20 50 0 2 4 6 8 10 Forward current I F (mA) Collector-emitter voltage V C E (V) Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 11/16

Photocoupler CNY17F series Fig.7 Relative Current Transfer Ratio vs. Fig.8 Collector-emitter Saturation Voltage Ambient Temperature vs. Ambient Temperature 150 0.16 t tf trrrrruenanseai ()o% 15000 VIFC=E=105mVA itt trresaumti ltaonvoage 00000.....1101042086 IIFC==120.5mmAA Rlti eavec lltr-oecoeC t ()()saVV 00..0042 0 0 -55 -25 0 25 50 75 100 -55 -25 0 25 50 75 100 Ambient temperature Ta ( oC) Ambient temperature Ta ( oC) Fig.9 Collector Dark Current vs. Fig.10 Response Time vs. Ambient Temperature Load Resistance 10-6 10 VCE=10V IF=10mA t rrecodakcut I rr()enAECO1111100000--1---198710 ti ()esponseesRm 125 VTatCtrf=C=255V oC lloC 10-12 10-13 0.5 -30 0 20 40 60 80 100 0.02 0.05 0.1 0.2 0.5 Ambient temperature Ta ( oC) Load resistance RL (k ) Fig.11 Frequency Response Test Circuit for Response Time 2 Vcc Input IF=10mA Output 0 VCC=5V Input RD RL Output 10% Ta=25 oC )B 90% (vdA -2 td ts ai n -4 tr tf eg R =200 150 75 ag -6 Test Circuit for Frequency Response ltoV Vcc -8 RD RL -10 Output 0.5 1 2 5 1020 50100200 500 Frequency f (kHz) Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 12/16

Photocoupler CNY17F series 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (T ) 150˚C Smin - Temperature Max (T ) 200˚C Smax - Time (min to max) (ts) 90±30 sec Soldering zone - Temperature (T ) 217˚C L - Time (t ) 60 sec L Peak Temperature (T ) 260˚C P Ramp-up rate 3˚C / sec max. Ramp-down rate 3~6˚C / sec 20 sec Ramp-up TP260 C TL217 C ) C Tsmax200 C Ramp-down ( e r u at Tsmin 60 sec er 150 C tL (Soldering) p m e T 25 C Time (sec) 60 ~ 120 sec 35~70 sec ts (Preheat) Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 13/16

Photocoupler CNY17F series 6.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 14/16

Photocoupler CNY17F series 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 8. NAMING RULE CNY17F-X(1)-(2) DEVICE PART NUMBER Classified by CTR RANK Please refer to the CTR table on Page P7 (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package (2) TAPING TYPE (TA, TA1 or none) Please refer to orientation of taping on Page P5 Example : CNY17F-1S-TA1 Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 15/16

Photocoupler CNY17F series CNY17F-X(1)(2)-V DEVICE PART NUMBER Classified by CTR RANK Please refer to the CTR table on Page P7 (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package (2) TAPING TYPE (TA, TA1 or none) Please refer to orientation of taping on Page P5 (3) VDE Option Example : CNY17F-1STA1-V 9. NOTES (cid:1) LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices. (cid:1) The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. (cid:1) For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. (cid:1) When requiring a device for any “specific” application, please contact our sales in advice. (cid:1) If there are any questions about the contents of this publication, please contact us at your convenience. (cid:1) The contents described herein are subject to change without prior notice. (cid:1) Immerge unit’s body in solder paste is not recommended. Part No : CNY17F series BNS-OD-FC002/A4 Rev.: C 16/16