CMF Industrial www.vishay.com Vishay Dale Metal Film Resistors, Axial, Industrial, Precision FEATURES • Small size - conformal coated • Flame retardant epoxy coating • Controlled temperature coefficient Available • Excellent high frequency characteristics • Exceptionally low noise; typically 0.10 μV/V • Low voltage coefficient to ± 5 ppm/V • Special tolerance and or TC matching available on request Available • Material categorization:  for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. Vishay Dale Model CMF is also available as Military Qualified Styles RN and RL. See Vishay Dale’s CMF (Military RN and RL) datasheet (www.vishay.com/doc?31027) for the MIL-SPEC ratings / attributes. (Except for marking, the Industrial and Military versions are exactly the same). STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM POWER POWER RESISTANCE TEMPERATURE GLOBAL HISTORICAL WORKING RATING RATING TOLERANCE RANGE COEFFICIENT MODEL MODEL VOLTAGE (1) P (2) P (2) ± % 70 °C 125 °C  ± ppm/°C V W W 10 to 2.5M 0.1, 0.25, 0.5, 1 25 10 to 2.5M 0.1, 0.25, 0.5, 1, 2, 5 50 CMF50 CMF-50 200 0.25 0.125 10 to 2.5M 1, 2, 5 100 10 to 22M 1, 2, 5 150, 200 10 to 2.5M 0.1, 0.25, 0.5, 1 25 10 to 2.5M 0.1, 0.25, 0.5 50 10 to 5M 1, 2, 5 50 CMF55 CMF-55 250 0.5 0.25 1 to 22.1M 1, 2, 5 100 0.5 to 50M 1, 2, 5 150 0.5 to 50M 1 200 0.1 to 50M 2, 5 200 10 to 2.5M 0.1, 0.25, 0.5, 1 25 10 to 2.5M 0.1, 0.25, 0.5 50 10 to 10M 1, 2, 5 50 CMF60 CMF-60 500 1 0.5 1 to 10M 1, 2, 5 100 0.5 to 10M 1, 2, 5 150 0.5 to 10M 1 200 0.1 to 10M 2, 5 200 10 to 2.5M 0.1, 0.25, 0.5, 1 25 10 to 2.5M 0.1, 0.25, 0.5 50 10 to 10M 1, 2, 5 50 CMF65 CMF-65 500 1.5 1 1 to 15M 1, 2, 5 100 0.5 to 22M 1, 2, 5 150 0.5 to 22M 1 200 0.1 to 22M 2, 5 200 10 to 2.5M 0.1, 0.25, 0.5, 1 25 10 to 2.5M 0.1, 0.25, 0.5 50 CMF70 CMF-70 500 1.75 1.25 10 to 10M 1, 2, 5 50 1 to 15M 1, 2, 5 100 1 to 22M 1, 2, 5 150, 200 5 to 5M 2, 5 100 CMF07 CMF-07 250 0.5 - 1 to 5M 2, 5 150, 200 5 to 10M 2, 5 100 CMF20 CMF-20 500 1 - 1 to 10M 2, 5 150, 200 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (2) See the load life shift due to power and derating table for a summary of the more common combinations of power rating, case size and ambient operating temperature that prevail in various industrial and military resistor specifications. The “performance” table quantifies the load life stability under these combinations. Revision: 16-Sep-16 1 Document Number: 31018 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF Industrial www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CMF55301R00FKRE (preferred part numbering format) C M F 5 5 3 0 1 R 0 0 F K R E GLOBAL MODEL RESISTANCE VALUE TOLERANCE TEMPERATURE PACKAGING SPECIAL CODE COEFFICIENT (1) (See Standard R = Ω B = ± 0 .1 % E = 25 ppm EK = lead (Pb)-free, bulk Blank = standard Electrical K = kΩ C = ± 0.25 % H = 50 ppm EA = lead (Pb)-free, T/R (full) (Dash number) (Up to 3 digits) Specifications M = MΩ D = ± 0.5 % K = 100 ppm EB = lead (Pb)-free, From 1 to 999 table) R10000 = 0.1 Ω F = ± 1 % L = 150 ppm T/R (1000 pieces) as applicable 16M800K00000 == 618.00 MkΩΩ GJ == ±± 52 %% N = 200 ppm REB =F t=in t/ilne/aleda, dT,/ Rbu (lfkull) 78005 ==b accnoodlloosrr (bb≤aa 1nn dd%eedd),, R6 = tin/lead, T/R (1000 pieces) 4 bands (≥ 2 %) Historical Part Number example: CMF-553010FT-1 (will continue to be accepted) 88 = hot solder dip CMF-55 3010 F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING Notes • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). (1) Tolerances of ± 0.5 % (D), ± 0.25 % (C) and ± 0.1 % (B) are available only in 50 ppm and 25 ppm temperature coefficients. DIMENSIONS in inches (millimeters) 1.500 ± 0.125 (1) A (38.10 ± 3.18) C D (Max.) B C GLOBAL MODEL A B D (Max.) 0.150 ± 0.020 0.065 ± 0.015 0.016 ± 0.002 CMF50 0.187 (4.75) (3.81 ± 0.51) (1.65 ± 0.38) (0.41 ± 0.05) 0.240 ± 0.020 (3) 0.090 ± 0.008 0.025 ± 0.002 CMF55 0.290 (7.37) (6.10 ± 0.51) (2.29 ± 0.20) (0.64 ± 0.05) 0.344 ± 0.031 0.145 ± 0.015 0.025 ± 0.002 (2) CMF60 0.425 (10.80) (8.74 ± 0.79) (3.68 ± 0.38) (0.64 ± 0.05) 0.562 ± 0.031 0.180 ± 0.015 0.025 ± 0.002 CMF65 0.687 (17.45) (14.27 ± 0.79) (4.57 ± 0.38) (0.64 ± 0.05) 0.562 ± 0.031 0.180 ± 0.015 0.032 ± 0.002 CMF70 0.687 (17.45) (14.27 ± 0.79) (4.57 ± 0.38) (0.81 ± 0.05) 0.240 ± 0.020 0.090 ± 0.008 0.025 ± 0.002 CMF07 0.290 (7.37) (6.10 ± 0.51) (2.29 ± 0.20) (0.64 ± 0.05) 0.375 ± 0.040 0.145 ± 0.015 0.032 ± 0.002 CMF20 0.425 (10.80) (9.53 ± 1.02) (3.68 ± 0.38) (0.81 ± 0.05) Notes (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. (2) Available with 0.032" (0.813 mm) lead [CMF60..95] (3) 0.260" ± 0.020" (6.60 mm ± 0.51 mm) for values > 5 M TECHNICAL SPECIFICATIONS PARAMETER UNIT CMF50 CMF55 CMF07 CMF60 CMF20 CMF65 CMF70 Maximum Working Voltage V 200  250  250  500 500  500  500 Insulation Voltage (1 Min) V > 500 eff Voltage Coefficient (Max.) ppm/V ± 5 (measured between 10 % and full rated voltage) Dielectric Strength V 450 450 450 750 750 900 900 AC Insulation Resistance  1011 Operating Temperature Range °C -55 to +175 Terminal Strength (Pull Test) lb 2 2 5 2 5 2 5 0.10 μV/V over a decade of frequency, with low and intermediate resistance values typically Noise dB below 0.05 μV/V Weight (Max.) g 0.12 0.28 0.28 0.50 0.60 1.00 1.10 Revision: 16-Sep-16 2 Document Number: 31018 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF Industrial www.vishay.com Vishay Dale TEMPERATURE COEFFICIENT CODES GLOBAL TC CODE HISTORICAL TC CODE TEMPERATURE COEFFICIENT E T-9 25 ppm/°C H T-2 50 ppm/°C K T-1 100 ppm/°C L T-0 150 ppm/°C N T-00 200 ppm/°C LOAD LIFE SHIFT DUE TO POWER AND DERATING (AT +70 °C AND AT +125 °C) The power rating for the CMF parts is tied to the derating temperature, the heat rise of the parts, and the R for the load life performance. When the tables/graphs below are used together they show that when the parts are run at their higher power ratings, the parts will run hotter, which has the potential of causing the resistance of the parts to shift more over the life of the part. LOAD LIFE SHIFT VS. POWER RATING MAXIMUM R (TYPICAL TEST LOTS) LOAD LIFE ± 0.15 % ± 0.5 % ± 1.0 % ± 0.15 % ± 0.5 % ± 1.0 % MODEL POWER RATING AT +70 °C POWER RATING AT +125 °C CMF50 1/20 W and 1/10 W 1/8 W 1/4 W 1/20 W 1/10 W 1/8 W CMF55, CMF07 1/10 W and 1/8 W 1/4 W 1/2 W 1/10 W 1/8 W 1/4 W CMF60, CMF20 1/8 W and 1/4 W 1/2 W 3/4 W and 1 W 1/8 W 1/4 W 1/2 W CMF65 1/4 W and 1/2 W 3/4 W 1 W and 1-1/2 W 1/4 W 1/2 W 3/4 W and 1 W CMF70 1/4 W and 1/2 W 3/4 W 1 W and 1-3/4 W 1/4 W 1/2 W 3/4 W and 1-1/4 W CMF resistors have an operating temperature range of -55 °C to +175 °C. They must be derated at high ambient temperatures according to the derating curve. %120 T)120 CMF50 CMF55, NI RE100 MBIEN100 CMCFM07F60, W A CMF20 O E P DE 80 BOV 80 CMF65, T A CMF70 AR 60 E (°C 60 S 40 T RI 40 A E H 20 20 0 0 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 - 55- 50 - 25 0 25 50 70 75 100 125 150165175 200 APPLIED POWER IN W DERATING AMBIENT TEMPERATURE IN °C THERMAL RESISTANCE Example: When a CMF55 part is run at 1/8 W in a 70 °C ambient environment, the resistor will generate enough heat that the surface temperature of the part will reach about 19 °C over the ambient temperature, and over the life of the part this could cause the resistance value to shift up to ± 0.15 %. If the same resistor was instead run at 1/4 W in a 70 °C environment, the element will heat up to about 30 °C over ambient, and over the life of the part the resistance value could shift roughly ± 0.5 %. And if the resistor was run at it maximum power rating of 1/2 W in a 70 °C environment, it will heat up to about 58 °C over ambient, and you could see the resistance value shift roughly ± 1 % over the life of the part. MATERIAL SPECIFICATIONS Flame retardant epoxy, formulated for superior Element Vacuum-deposited nickel-chrome alloy Coating moisture protection Continuous satisfactory coverage when tested Core Fire-cleaned high purity ceramic Solderability in accordance with MIL-R-10509 Revision: 16-Sep-16 3 Document Number: 31018 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF Industrial www.vishay.com Vishay Dale SPECIAL MODIFICATIONS 1.Terminals may be supplied in any commercial material with several type finishes. 2.Special pre-conditioning (power aging, temperature cycling, etc.) to customer specifications. 3.Non-helixed resistors can be supplied for critical high frequency applications. 4.Fusible, flameproof versions available. MARKING Temperature coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm CMF50: (3 lines) CMF55, CMF60, CMF65, CMF70: (4 lines) 3.01 Value CMF55 Style and size K 1 % Ohm, K or M sign and Tolerance 49.9 k Value 1208 4-digit date code 1 % T2 Tolerance and TC 1208 4-digit date code Note • CMF07 and CMF20 parts are marked with color bands, either per MIL-PRF-22684 (with a wide white band) or using commercial color bands. CMFxx..70 and CMFxx..80 parts are marked using commercial color bands. PERFORMANCE TEST  AT +70 °C AT +125 °C (TEST METHODS - MIL-STD-202) MAXIMUM R (TYPICAL TEST LOTS) Short Time Overload ± 0.05 % ± 0.05 % Low Temperature Operation ± 0.05 % ± 0.05 % Moisture Resistance ± 0.05 % ± 0.05 % Shock ± 0.01 % ± 0.01 % Vibration ± 0.04 % ± 0.04 % Temperature Cycling ± 0.15 % ± 0.15 % Load Life Varies based on power rating used; see load life shift due to power and derating table Dielectric Withstanding Voltage ± 0.01 % ± 0.01 % Effect of Solder ± 0.03 % ± 0.03 % Revision: 16-Sep-16 4 Document Number: 31018 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: CMF551K3300BER6