TECHNICAL DATASHEET Doc. No: TTDS-236 Issue 1 CM-NMX CM-NMX Light-Weight Military Grade Tie-On Cable Marker Label material Flame resistant meta aramid/PET multilayer sheet. Thickness: 0.28mm nominal Print system Thermal Transfer Printable Recommended system T312M printer with 1330-3300 ribbon Alternate system: TE3124 printer with 1330-3300 ribbon Print performance Print legible after 50 rubs min. RW2531 (In accordance with SAE-AS-5942) Print legible after 50 strokes min. RW2531 (in accordance with MIL-STD-202) Tear strength 25N/mm min. RW2531 Flammability ATB 15 seconds max. RW2531 (in accordance with ASTM D 568) AEB 15mm max. Thermal Properties: Thermal Ageing 168hrs at 175°C No dripping flowing or cracking RW2531 Print legible after 50 rubs min. Print test in accordance with SAE-AS-5942 Thermal endurance 1000hrs at 135°C No dripping flowing or cracking RW2531 Print legible after 50 rubs min. Print test in accordance with SAE-AS-5942 Low temperature flexibility No cracking RW2531 4hrs at -55°C Author: M Priddle Print date: 20-Aug-10 June 2010: Page: 1 of 2 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.

TECHNICAL DATASHEET Doc. No: TTDS-236 Issue 1 CM-NMX Environmental: Water absorption (24hrs at 23°C) 5% maximum RW2531 (in accordance with ASTM D 570) Weatherability (30 days) Print legible RW2531 (in accordance with ASTM G154-06) Humidity resistance Print legible RW2531 (30 days at 38°C, 95% RH) Chemical resistance: Fluid immersion 24hrs at 23°C JP-8 Aviation gasoline (100/130) Hydraulic fluid (MIL PRF 5606) RW2531 Lubricating Oil (MIL PRF 7808) Print legible after 20 rubs minimum IRM 903 Oil Print test in accordance with SAE-AS-5942 Water Salt water (5%) Anti-icing fluid (SAE-AS-8243) Dip test (5 cycles) IPA RW2531 10% sulphuric acid Print legible after 20 rubs minimum 10% sodium hydroxide Print test in accordance with SAE-AS-5942 Mineral spirits CM-NMX Meets the requirements of DMS 2325 type I Code C Author: M Priddle Print date: 20-Aug-10 June 2010: Page: 2 of 2 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.