Features This series is currently available but ■ 0603 size not recommended for new designs. ■ Available in E12 Series ■ High frequency ■ Nickel barrier CI160808 Series - Multi-Layer Chip Inductors Electrical Specifications General Specifications Temperature Rise Inductance Q Test Freq. SRF MHz DCR Irms ..................20 ˚C max. at rated current Bourns Part No. Operating Temperature nH Tol. % min. L,Q MHz min. ohm max. mA max. ..................................-55 °C to +105 °C CI160808-1N0D 1.0 ±0.3 nH 8 100 10000 0.05 300 Storage Temperature ..-55 °C to +105 °C CI160808-1N2D 1.2 ±0.3 nH 8 100 10000 0.05 300 Materials CI160808-1N5D 1.5 ±0.3 nH 8 100 6000 0.10 300 Base Material ............................Ceramic CI160808-1N8D 1.8 ±0.3 nH 8 100 6000 0.10 300 Terminal ....................................Ag/Ni/Sn CI160808-2N2D 2.2 ±0.3 nH 8 100 6000 0.10 300 Packaging .................4,000 pcs. per reel CI160808-2N7D 2.7 ±0.3 nH 8 100 6000 0.10 300 CI160808-3N3D 3.3 ±0.3 nH 10 100 6000 0.12 300 Product Dimensions CI160808-3N9D 3.9 ±0.3 nH 10 100 6000 0.14 300 CI160808-4N7D 4.7 ±0.3 nH 10 100 4000 0.16 300 0.80 ± 0.15 0.80 ± 0.15 CI160808-5N6D 5.6 ±0.3 nH 10 100 4000 0.18 300 (.031 ± .006) (.031 ± .006) CI160808-6N8J 6.8 ±5 10 100 4000 0.22 300 CCII116600880088--81N0N2JJ 81.02 ±±55 1102 110000 33540000 00..2246 330000 1.6(00.0 .±31 020 .±±1 50.0.2008)1.6(00.0 .±31 020 .±±1 50.0.2008) (0.0.8301 ±± 0.0.1056 ) (0.0.8301 ±± 0.0.1056 ) (.063 ± .006) (.063 ± .006) CI160808-12NJ 12 ±5 12 100 2600 0.28 300 DIMENSIONS: MM (INCHES) CI160808-15NJ 15 ±5 12 100 2300 0.32 300 CI160808-18NJ 18 ±5 12 100 2000 0.25 300 CI160808-22NJ 22 ±5 12 100 1600 0.40 300 CI160808-27NJ 27 ±5 12 100 1400 0.45 300 Recommended Layout CI160808-33NJ 33 ±5 12 100 1200 0.55 300 CI160808-39NJ 39 ±5 12 100 1100 0.60 300 0.95 0.95 CI160808-47NJ 47 ±5 12 100 900 0.70 300 (.037) (.037) CI160808-56NJ 56 ±5 12 100 900 0.75 300 CI160808-68NJ 68 ±5 12 100 700 0.85 300 0.85 0.85 0.80 0.80 CI160808-82NJ 82 ±5 12 100 600 0.95 300 (.033) (.033) 2( .P0L3C1S). 2( .P0L3C1S). CI160808-R10J 100 ±5 12 100 600 1.00 300 CI160808-R12J 120 ±5 8 50 500 1.20 300 Schematic CI160808-R15J 150 ±5 8 50 500 1.20 300 CI160808-R18J 180 ±5 8 50 400 1.30 300 CI160808-R22J 220 ±5 8 50 400 1.50 300 Current Characteristics 10000 1000 100 mpedance (Ohms) 110100000 33 nH47 8n2H nH 22 61n.0H8 nnHH nductance (Ohms) 11000 82 nH 47 nH332 n2H n61H.08 nnHH ductance (Ohms) 10 33 nH 226 n.18H0 n nHH I I In 110 100 1000 10000 110 100 1000 10000 110 100 1000 10000 Frequency (MHz) Frequency (MHz) Frequency (MHz) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. WARNING Cancer and Reproductive Harm Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth www.P65Warnings.ca.gov on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Inductance Characteristics Q Characteristics 1000 100 80 H) n100 e ( 60 c Q n a 22nH ct 40 du 10 61.08nnHH In 4.7nH 20 10nH 4.7nH 6.8nH 22nH 1 0 10 100 1000 10000 10 100 1000 10000 Frequency (MHz) Frequency (MHz) CI160808 Series - Multi-Layer Chip Inductors Solder Profile NATURAL PRE-HEATING SOLDERING COOLING TP (260 °C / 10 seconds max.) tp (245 °C / 20 ~ 40 seconds) C) ure (° 200 °C 217 °C perat 150 °C 60 ~ 150 m seconds Te 60 ~ 180 seconds 480 seconds max. Time (Seconds) Packaging Specifications 9.0 ± 0.5 2.0 ± 0.5 DIMENSIONS: MM (.354 ± .020) (.079 ± .020) (INCHES) THICKNESS 0.10 13.5 ± 0.5 (.004) (.531 ± .020) MAX. DIA. 60 ± 2 (2.362 ± .079) DIA. 178 ± 2 (7.008 ± .079) DIA. EMBOSSED CARRIER 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.1 (.069 ± .004) 1.56 +0.1/-0.05 DIA. (.157 ± .004) (.079 ± .004) (.061 +.004/-.002) 3.5 ± 0.1 (.138 ± .004) 8.0 ± 0.1 8.0 ± 0.1 (.315 ± .004) (.315 ± .004) 4.0 ± 0.10 0.96 +0.05/-0.03 0.95 ± 0.05 (.157 ± .004) (.038 +.002/-.001) (.038 ± .002) DIMENSIONS: MM USER DIRECTION OF FEED (INCHES) QTY: 4,000 PCS PER REEL REV. 10/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R