MULTILAYER CERAMIC CHIP CAPACITORS May 2019 MULTILAYER CERAMIC CHIP CAPACITORS Automotive grade, conductive epoxy application　 CGA series CGA2 1005 [0402 inch] CGA3 1608 [0603 inch] CGA4 2012 [0805 inch] CGA5 3216 [1206 inch] CGA6 3225 [1210 inch] * Dimensions code: JIS[EIA]

(2/16) MULTILAYER CERAMIC CHIP CAPACITORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS 1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (excepting Pharmaceutical Affairs Law clas- (10) Electric heating apparatus, burning equipment sification Class1,2) (11) Disaster prevention/crime prevention equipment (4) Power-generation control equipment (12) Safety equipment (5) Atomic energy-related equipment　　 (13) Other applications that are not considered general-purpose (6) Seabed equipment applications (7) Transportation control equipment When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability, or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions. 2. We may modify products or discontinue production of a product listed in this catalog without prior notification. 3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly recommend that you exchange these delivery specifications with customers that use one of these products. 4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and For- eign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law. 5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. 6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. We do not grant license of these rights. 7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to products that are purchased through other third parties. Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail. This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number orders. Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the product label. Contact your local TDK Sales representative for more information. (Example) Catalog issued date Catalog number Item description (on delivery label) Prior to January 2013 C1608C0G1E103J(080AA) C1608C0G1E103JT000N January 2013 and later C1608C0G1E103J080AA C1608C0G1E103JT000N 20190508 / mlcc_automotive_epoxy_en.fm

(3/16) MULTILAYER CERAMIC CHIP CAPACITORS CGA series Cl Pb Br Conductive epoxy application RoHS REACH Halogen Lead SVHC-Free Free Free Type: CGA2/1005 [0402 inch], CGA3/1608 [0603 inch], CGA4/2012 [0805 inch], CGA5/3216 [1206 inch], CGA6/3225 [1210 inch] ■SERIES OVERVIEW Conductive epoxy application CGA series, automotive grade of TDK's multilayer ceramic chip capacitor, is a product for conductive glue mounting, not for solder mounting. The risk of silver migration is reduced due to AgPdCu termination. The maximum operating temperature is 150°C and the capacitance range is up to 10µF. ■FEATURES ■APPLICATIONS (cid:129) The risk of silver migration is reduced due to AgPdCu termination. (cid:129) For only conductive glue mounting, not for solder mounting. (cid:129) The maximum operating temperature is 150°C (X8R). (cid:129) ABS, transmission, engine sensors, etc. (cid:129) C0G temperature characteristic which has excellent stable tempera- ture and DC-bias characteristics is available. (cid:129) AEC-Q200 compliant. ■SHAPE & DIMENSIONS ■PRODUCT STRUCTURE General type Conductive epoxy type L W T G Sn Ni B Cu AgPdCu Cu L Body length W Body width Termination consists of 3 layers by The risk of silver migration is reduced Cu, Ni and Sn. due to AgPdCu termination. T Body height B Terminal width G Terminal spacing Dimensions in mm Type L W T B G CGA2 1.00±0.15 0.50±0.10 0.50±0.10 0.10min. 0.30min. CGA3 1.60±0.15 0.80±0.15 0.80±0.15 0.20min. 0.30min. CGA4 2.00±0.25 1.25±0.25 1.25±0.25 0.20min. 0.50min. CGA5 3.20+0.30,-0.10 1.60+0.30,-0.10 1.60+0.30,-0.10 0.20min. 1.00min. CGA6 3.20±0.45 2.50±0.30 2.50±0.30 0.20min. — Dimensional tolerances are typical values. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(4/16) MULTILAYER CERAMIC CHIP CAPACITORS ■CATALOG NUMBER CONSTRUCTION CGA 6 P 1 X8R 1E 106 K 250 A D (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (1) Series (7) Nominal capacitance (pF) The capacitance is expressed in three digit codes and in units of (2) Dimensions L x W (mm) pico Farads (pF). The first and second digits identify the first and Code EIA Length Width Terminal width second significant figures of the capacitance. The third digit identi- 2 CC0402 1.00 0.50 0.10 fies the multiplier. R designates a decimal point. 3 CC0603 1.60 0.80 0.20 4 CC0805 2.00 1.25 0.20 (Example)0R5 = 0.5pF 5 CC1206 3.20 1.60 0.20 101 = 100pF 6 CC1210 3.20 2.50 0.20 225 = 2,200,000pF = 2.2µF (3) Thickness code (8) Capacitance tolerance Code Thickness Code Tolerance B 0.50mm C ±0.25pF C 0.60mm D ±0.50pF E 0.80mm J ±5% F 0.85mm K ±10% H 1.15mm M ±20% J 1.25mm L 1.60mm (9) Thickness M 2.00mm Code Thickness P 2.50mm 050 0.50mm 060 0.60mm (4) Voltage condition for life test 080 0.80mm Symbol Condition 085 0.85mm 1 1 × R.V. 115 1.15mm 2 2 × R.V. 125 1.25mm 3 1.5 × R.V. 160 1.60mm 200 2.00mm 250 2.50mm (5) Temperature characteristics Temperature Temperature coefficient (10) Packaging style Temperature range characteristics or capacitance change Code Style C0G 0±30 ppm/°C –55 to +125°C A 178mm reel, 4mm pitch X7R ±15% –55 to +125°C B 178mm reel, 2mm pitch X8R ±15% –55 to +150°C (11) Special reserved code (6) Rated voltage (DC) Code Description Code Voltage (DC) D Conductive epoxy application 0J 6.3V 1C 16V 1E 25V 1V 35V 1H 50V 2A 100V Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(5/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CGA2/1005 [0402 inch] Capacitance C0G X7R X8R 1H 1H 1E 1C 1H 1E 1C (pF) Code (50V) (50V) (25V) (16V) (50V) (25V) (16V) 1 010 1.5 1R5 2 020 2.2 2R2 3 030 3.3 3R3 4 040 4.7 4R7 5 050 6 060 6.8 6R8 7 070 8 080 9 090 10 100 12 120 15 150 18 180 22 220 27 270 33 330 39 390 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1,000 102 1,500 152 2,200 222 3,300 332 4,700 472 6,800 682 10,000 103 15,000 153 22,000 223 33,000 333 47,000 473 68,000 683 100,000 104 Standard thickness　　 0.50mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(6/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CGA3/1608 [0603 inch] Capacitance C0G X7R X8R 2A 1H 1H 2A 1H (pF) Code (100V) (50V) (50V) (100V) (50V) 1 010 1.5 1R5 2 020 2.2 2R2 3 030 3.3 3R3 4 040 4.7 4R7 5 050 6 060 6.8 6R8 7 070 8 080 9 090 10 100 12 120 15 150 18 180 22 220 27 270 33 330 39 390 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 10000 103 Standard thickness　 0.80mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(7/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CGA3/1608 [0603 inch] Capacitance X7R X8R 1H 1V 1E 1C 2A 1H 1E 1C (pF) Code (50V) (35V) (25V) (16V) (100V) (50V) (25V) (16V) 15000 153 22000 223 33000 333 47000 473 68000 683 100000 104 150000 154 220000 224 330000 334 470000 474 680000 684 1000000 105 Standard thickness　 0.80mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(8/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CGA4/2012 [0805 inch] Capacitance C0G X7R X8R 1H 1H 1E 1C 0J 2A 1H 1E 1C (pF) Code (50V) (50V) (25V) (16V) (6.3V) (100V) (50V) (25V) (16V) 2,700 272 3,300 332 3,900 392 4,700 472 5,600 562 6,800 682 8,200 822 10,000 103 15,000 153 22,000 223 33,000 333 47,000 473 68,000 683 100,000 104 150,000 154 220,000 224 330,000 334 470,000 474 680,000 684 1,000,000 105 1,500,000 155 2,200,000 225 3,300,000 335 4,700,000 475 6,800,000 685 10,000,000 106 Standard thickness　　 0.60 mm　 0.85 mm　 1.25 mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(9/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CGA5/3216 [1206 inch] Capacitance C0G X7R X8R 1H 1H 1E 1C 2A 1H 1E 1C (pF) Code (50V) (50V) (25V) (16V) (100V) (50V) (25V) (16V) 4,700 472 5,600 562 6,800 682 8,200 822 10,000 103 15,000 153 22,000 223 33,000 333 47,000 473 68,000 683 100,000 104 150,000 154 220,000 224 330,000 334 470,000 474 680,000 684 1,000,000 105 1,500,000 155 2,200,000 225 3,300,000 335 4,700,000 475 6,800,000 685 10,000,000 106 Standard thickness　　 0.60 mm　 0.85 mm　 1.15 mm　 1.60 mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Capacitance range chart CGA6/3225 [1210 inch] Capacitance X7R X8R 1H 1E 2A 1E 1C (pF) Code (50V) (25V) (100V) (25V) (16V) 470,000 474 680,000 684 1,000,000 105 1,500,000 155 2,200,000 225 3,300,000 335 4,700,000 475 6,800,000 685 10,000,000 106 Standard thickness　　 1.60 mm　 2.00 mm　 2.50 mm ■ Please refer to the capacitance range table at P-10 and after for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(10/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C) Thickness Capacitance Catalog number 　 Capacitance Dimensions (mm) tolerance Rated voltage Edc: 100V Rated voltage Edc: 50V 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H010C050BD 1pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A010C080AD CGA3E2C0G1H010C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H1R5C050BD 1.5pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A1R5C080AD CGA3E2C0G1H1R5C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H020C050BD 2pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A020C080AD CGA3E2C0G1H020C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H2R2C050BD 2.2pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A2R2C080AD CGA3E2C0G1H2R2C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H030C050BD 3pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A030C080AD CGA3E2C0G1H030C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H3R3C050BD 3.3pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A3R3C080AD CGA3E2C0G1H3R3C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H040C050BD 4pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A040C080AD CGA3E2C0G1H040C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H4R7C050BD 4.7pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A4R7C080AD CGA3E2C0G1H4R7C080AD 1005 0.50±0.10 ±0.25pF CGA2B2C0G1H050C050BD 5pF 1608 0.80±0.15 ±0.25pF CGA3E2C0G2A050C080AD CGA3E2C0G1H050C080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H060D050BD 6pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A060D080AD CGA3E2C0G1H060D080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H6R8D050BD 6.8pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A6R8D080AD CGA3E2C0G1H6R8D080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H070D050BD 7pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A070D080AD CGA3E2C0G1H070D080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H080D050BD 8pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A080D080AD CGA3E2C0G1H080D080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H090D050BD 9pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A090D080AD CGA3E2C0G1H090D080AD 1005 0.50±0.10 ±0.50pF CGA2B2C0G1H100D050BD 10pF 1608 0.80±0.15 ±0.50pF CGA3E2C0G2A100D080AD CGA3E2C0G1H100D080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H120J050BD 12pF 1608 0.80±0.15 ±5% CGA3E2C0G2A120J080AD CGA3E2C0G1H120J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H150J050BD 15pF 1608 0.80±0.15 ±5% CGA3E2C0G2A150J080AD CGA3E2C0G1H150J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H180J050BD 18pF 1608 0.80±0.15 ±5% CGA3E2C0G2A180J080AD CGA3E2C0G1H180J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H220J050BD 22pF 1608 0.80±0.15 ±5% CGA3E2C0G2A220J080AD CGA3E2C0G1H220J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H270J050BD 27pF 1608 0.80±0.15 ±5% CGA3E2C0G2A270J080AD CGA3E2C0G1H270J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H330J050BD 33pF 1608 0.80±0.15 ±5% CGA3E2C0G2A330J080AD CGA3E2C0G1H330J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H390J050BD 39pF 1608 0.80±0.15 ±5% CGA3E2C0G2A390J080AD CGA3E2C0G1H390J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H470J050BD 47pF 1608 0.80±0.15 ±5% CGA3E2C0G2A470J080AD CGA3E2C0G1H470J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H560J050BD 56pF 1608 0.80±0.15 ±5% CGA3E2C0G2A560J080AD CGA3E2C0G1H560J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H680J050BD 68pF 1608 0.80±0.15 ±5% CGA3E2C0G2A680J080AD CGA3E2C0G1H680J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H820J050BD 82pF 1608 0.80±0.15 ±5% CGA3E2C0G2A820J080AD CGA3E2C0G1H820J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H101J050BD 100pF 1608 0.80±0.15 ±5% CGA3E2C0G2A101J080AD CGA3E2C0G1H101J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H121J050BD 120pF 1608 0.80±0.15 ±5% CGA3E2C0G2A121J080AD CGA3E2C0G1H121J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H151J050BD 150pF 1608 0.80±0.15 ±5% CGA3E2C0G2A151J080AD CGA3E2C0G1H151J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H181J050BD 180pF 1608 0.80±0.15 ±5% CGA3E2C0G2A181J080AD CGA3E2C0G1H181J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H221J050BD 220pF 1608 0.80±0.15 ±5% CGA3E2C0G2A221J080AD CGA3E2C0G1H221J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H271J050BD 270pF 1608 0.80±0.15 ±5% CGA3E2C0G2A271J080AD CGA3E2C0G1H271J080AD ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(11/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C) Thickness Capacitance Catalog number 　 Capacitance Dimensions (mm) tolerance Rated voltage Edc: 100V Rated voltage Edc: 50V 1005 0.50±0.10 ±5% CGA2B2C0G1H331J050BD 330pF 1608 0.80±0.15 ±5% CGA3E2C0G2A331J080AD CGA3E2C0G1H331J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H391J050BD 390pF 1608 0.80±0.15 ±5% CGA3E2C0G2A391J080AD CGA3E2C0G1H391J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H471J050BD 470pF 1608 0.80±0.15 ±5% CGA3E2C0G2A471J080AD CGA3E2C0G1H471J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H561J050BD 560pF 1608 0.80±0.15 ±5% CGA3E2C0G2A561J080AD CGA3E2C0G1H561J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H681J050BD 680pF 1608 0.80±0.15 ±5% CGA3E2C0G2A681J080AD CGA3E2C0G1H681J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H821J050BD 820pF 1608 0.80±0.15 ±5% CGA3E2C0G2A821J080AD CGA3E2C0G1H821J080AD 1005 0.50±0.10 ±5% CGA2B2C0G1H102J050BD 1nF 1608 0.80±0.15 ±5% CGA3E2C0G2A102J080AD CGA3E2C0G1H102J080AD 1.2nF 1608 0.80±0.15 ±5% CGA3E2C0G2A122J080AD CGA3E2C0G1H122J080AD 1.5nF 1608 0.80±0.15 ±5% CGA3E2C0G1H152J080AD 1.8nF 1608 0.80±0.15 ±5% CGA3E2C0G1H182J080AD 2.2nF 1608 0.80±0.15 ±5% CGA3E2C0G1H222J080AD 1608 0.80±0.15 ±5% CGA3E2C0G1H272J080AD 2.7nF 2012 0.60±0.15 ±5% CGA4C2C0G1H272J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H332J080AD 3.3nF 2012 0.60±0.15 ±5% CGA4C2C0G1H332J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H392J080AD 3.9nF 2012 0.60±0.15 ±5% CGA4C2C0G1H392J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H472J080AD 4.7nF 2012 0.60±0.15 ±5% CGA4C2C0G1H472J060AD 3216 0.60±0.15 ±5% CGA5C2C0G1H472J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H562J080AD 5.6nF 2012 0.60±0.15 ±5% CGA4C2C0G1H562J060AD 3216 0.60±0.15 ±5% CGA5C2C0G1H562J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H682J080AD 6.8nF 2012 0.60±0.15 ±5% CGA4C2C0G1H682J060AD 3216 0.60±0.15 ±5% CGA5C2C0G1H682J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H822J080AD 8.2nF 2012 0.60±0.15 ±5% CGA4C2C0G1H822J060AD 3216 0.60±0.15 ±5% CGA5C2C0G1H822J060AD 1608 0.80±0.15 ±5% CGA3E2C0G1H103J080AD 10nF 2012 0.60±0.15 ±5% CGA4C2C0G1H103J060AD 3216 0.60±0.15 ±5% CGA5C2C0G1H103J060AD 2012 0.85±0.15 ±5% CGA4F2C0G1H153J085AD 15nF 3216 0.60±0.15 ±5% CGA5C2C0G1H153J060AD 2012 1.25±0.25 ±5% CGA4J2C0G1H223J125AD 22nF 3216 0.60±0.15 ±5% CGA5C2C0G1H223J060AD 2012 1.25±0.25 ±5% CGA4J2C0G1H333J125AD 33nF 3216 0.85±0.15 ±5% CGA5F2C0G1H333J085AD 47nF 3216 1.15±0.15 ±5% CGA5H2C0G1H473J115AD 68nF 3216 1.60+0.30,-0.10 ±5% CGA5L2C0G1H683J160AD 100nF 3216 1.60+0.30,-0.10 ±5% CGA5L2C0G1H104J160AD ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(12/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X7R (–55 to +125°C, ±15%) Thickness Capacitance Catalog number CapacitanceDimensions (mm) tolerance Rated voltage Edc: 50V Rated voltage Edc: 35V Rated voltage Edc: 25V Rated voltage Edc: 16V ±10% CGA3E2X7R1H102K080AD 1nF 1608 0.80±0.15 ±20% CGA3E2X7R1H102M080AD ±10% CGA3E2X7R1H152K080AD 1.5nF 1608 0.80±0.15 ±20% CGA3E2X7R1H152M080AD ±10% CGA3E2X7R1H222K080AD 2.2nF 1608 0.80±0.15 ±20% CGA3E2X7R1H222M080AD ±10% CGA3E2X7R1H332K080AD 3.3nF 1608 0.80±0.15 ±20% CGA3E2X7R1H332M080AD ±10% CGA3E2X7R1H472K080AD 4.7nF 1608 0.80±0.15 ±20% CGA3E2X7R1H472M080AD ±10% CGA3E2X7R1H682K080AD 6.8nF 1608 0.80±0.15 ±20% CGA3E2X7R1H682M080AD ±10% CGA2B3X7R1H103K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H103M050BD 10nF ±10% CGA3E2X7R1H103K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H103M080AD ±10% CGA2B3X7R1H153K050BD CGA2B2X7R1E153K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H153M050BD CGA2B2X7R1E153M050BD 15nF ±10% CGA3E2X7R1H153K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H153M080AD ±10% CGA2B3X7R1H223K050BD CGA2B2X7R1E223K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H223M050BD CGA2B2X7R1E223M050BD 22nF ±10% CGA3E2X7R1H223K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H223M080AD ±10% CGA2B3X7R1H333K050BD CGA2B2X7R1C333K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H333M050BD CGA2B2X7R1C333M050BD 33nF ±10% CGA3E2X7R1H333K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H333M080AD ±10% CGA2B3X7R1H473K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H473M050BD 47nF ±10% CGA3E2X7R1H473K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H473M080AD ±10% CGA2B3X7R1H683K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H683M050BD 68nF ±10% CGA3E2X7R1H683K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H683M080AD ±10% CGA2B3X7R1H104K050BD 1005 0.50±0.10 ±20% CGA2B3X7R1H104M050BD 100nF ±10% CGA3E2X7R1H104K080AD 1608 0.80±0.15 ±20% CGA3E2X7R1H104M080AD ±10% CGA3E3X7R1H154K080AD CGA3E2X7R1E154K080AD 1608 0.80±0.15 ±20% CGA3E3X7R1H154M080AD CGA3E2X7R1E154M080AD 150nF ±10% CGA4J2X7R1H154K125AD 2012 1.25±0.25 ±20% CGA4J2X7R1H154M125AD ±10% CGA3E3X7R1H224K080AD CGA3E2X7R1C224K080AD 1608 0.80±0.15 ±20% CGA3E3X7R1H224M080AD CGA3E2X7R1C224M080AD 220nF ±10% CGA4J2X7R1H224K125AD 2012 1.25±0.25 ±20% CGA4J2X7R1H224M125AD ±10% CGA3E1X7R1V334K080AD CGA3E3X7R1E334K080AD 1608 0.80±0.15 ±20% CGA3E1X7R1V334M080AD CGA3E3X7R1E334M080AD 330nF ±10% CGA4J2X7R1H334K125AD 2012 1.25±0.25 ±20% CGA4J2X7R1H334M125AD ±10% CGA3E1X7R1V474K080AD CGA3E3X7R1E474K080AD 1608 0.80±0.15 ±20% CGA3E1X7R1V474M080AD CGA3E3X7R1E474M080AD ±10% CGA4J2X7R1E474K125AD 470nF 2012 1.25±0.25 ±20% CGA4J2X7R1E474M125AD ±10% CGA5L2X7R1H474K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L2X7R1H474M160AD ±10% CGA3E1X7R1E684K080AD 1608 0.80±0.15 ±20% CGA3E1X7R1E684M080AD ±10% CGA4J3X7R1E684K125AD CGA4J2X7R1C684K125AD 680nF 2012 1.25±0.25 ±20% CGA4J3X7R1E684M125AD CGA4J2X7R1C684M125AD ±10% CGA5L2X7R1H684K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L2X7R1H684M160AD ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(13/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X7R (–55 to +125°C, ±15%) Thickness Capacitance Catalog number CapacitanceDimensions (mm) tolerance Rated voltage Edc: 50V Rated voltage Edc: 25V Rated voltage Edc: 16V Rated voltage Edc: 6.3V ±10% CGA3E1X7R1E105K080AD 1608 0.80±0.15 ±20% CGA3E1X7R1E105M080AD ±10% CGA4J3X7R1E105K125AD CGA4J2X7R1C105K125AD 2012 1.25±0.25 ±20% CGA4J3X7R1E105M125AD CGA4J2X7R1C105M125AD 1µF ±10% CGA5L2X7R1E105K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L2X7R1E105M160AD ±10% CGA6L2X7R1H105K160AD 3225 1.60±0.20 ±20% CGA6L2X7R1H105M160AD ±10% CGA4J1X7R1E155K125AD 2012 1.25±0.25 ±20% CGA4J1X7R1E155M125AD 1.5µF ±10% CGA6M2X7R1H155K200AD 3225 2.00±0.20 ±20% CGA6M2X7R1H155M200AD ±10% CGA4J3X7R1E225K125AD 2012 1.25±0.25 ±20% CGA4J3X7R1E225M125AD 2.2µF ±10% CGA5L2X7R1E225K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L2X7R1E225M160AD ±10% CGA4J1X7R1E335K125AD CGA4J3X7R1C335K125AD 3.3µF 2012 1.25±0.25 ±20% CGA4J1X7R1E335M125AD CGA4J3X7R1C335M125AD ±10% CGA4J1X7R1E475K125AD CGA4J3X7R1C475K125AD 2012 1.25+0.30,-0.25 ±20% CGA4J1X7R1E475M125AD CGA4J3X7R1C475M125AD ±10% CGA5L3X7R1C475K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L3X7R1C475M160AD 4.7µF ±10% CGA6M2X7R1E475K200AD 2.00±0.20 ±20% CGA6M2X7R1E475M200AD 3225 ±10% CGA6P3X7R1H475K250AD 2.50±0.30 ±20% CGA6P3X7R1H475M250AD ±10% CGA4J1X7R0J685K125AD 2012 1.25±0.25 ±20% CGA4J1X7R0J685M125AD 6.8µF ±10% CGA5L1X7R1E685K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L1X7R1E685M160AD ±10% CGA4J1X7R0J106K125AD 2012 1.25±0.25 ±20% CGA4J1X7R0J106M125AD 10µF ±10% CGA5L1X7R1E106K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L1X7R1E106M160AD Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(14/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X8R (–55 to +150°C, ±15%) Thickness Capacitance Catalog number CapacitanceDimensions (mm) tolerance Rated voltage Edc: 100V Rated voltage Edc: 50V Rated voltage Edc: 25V Rated voltage Edc: 16V ±10% CGA2B2X8R1H151K050BD 150pF 1005 0.50±0.10 ±20% CGA2B2X8R1H151M050BD ±10% CGA2B2X8R1H221K050BD 220pF 1005 0.50±0.10 ±20% CGA2B2X8R1H221M050BD ±10% CGA2B2X8R1H331K050BD 330pF 1005 0.50±0.10 ±20% CGA2B2X8R1H331M050BD ±10% CGA2B2X8R1H471K050BD 470pF 1005 0.50±0.10 ±20% CGA2B2X8R1H471M050BD ±10% CGA2B2X8R1H681K050BD 680pF 1005 0.50±0.10 ±20% CGA2B2X8R1H681M050BD ±10% CGA2B2X8R1H102K050BD 1005 0.50±0.10 ±20% CGA2B2X8R1H102M050BD 1nF ±10% CGA3E2X8R2A102K080AD CGA3E2X8R1H102K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A102M080AD CGA3E2X8R1H102M080AD ±10% CGA2B2X8R1H152K050BD 1005 0.50±0.10 ±20% CGA2B2X8R1H152M050BD 1.5nF ±10% CGA3E2X8R2A152K080AD CGA3E2X8R1H152K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A152M080AD CGA3E2X8R1H152M080AD ±10% CGA2B2X8R1H222K050BD 1005 0.50±0.10 ±20% CGA2B2X8R1H222M050BD 2.2nF ±10% CGA3E2X8R2A222K080AD CGA3E2X8R1H222K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A222M080AD CGA3E2X8R1H222M080AD ±10% CGA2B2X8R1H332K050BD 1005 0.50±0.10 ±20% CGA2B2X8R1H332M050BD 3.3nF ±10% CGA3E2X8R2A332K080AD CGA3E2X8R1H332K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A332M080AD CGA3E2X8R1H332M080AD ±10% CGA2B2X8R1H472K050BD 1005 0.50±0.10 ±20% CGA2B2X8R1H472M050BD 4.7nF ±10% CGA3E2X8R2A472K080AD CGA3E2X8R1H472K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A472M080AD CGA3E2X8R1H472M080AD ±10% CGA2B3X8R1H682K050BD CGA2B2X8R1E682K050BD 1005 0.50±0.10 ±20% CGA2B3X8R1H682M050BD CGA2B2X8R1E682M050BD 6.8nF ±10% CGA3E2X8R2A682K080AD CGA3E2X8R1H682K080AD 1608 0.80±0.15 ±20% CGA3E2X8R2A682M080AD CGA3E2X8R1H682M080AD ±10% CGA2B3X8R1H103K050BD CGA2B2X8R1E103K050BD 1005 0.50±0.10 ±20% CGA2B3X8R1H103M050BD CGA2B2X8R1E103M050BD ±10% CGA3E2X8R2A103K080AD CGA3E2X8R1H103K080AD 10nF 1608 0.80±0.15 ±20% CGA3E2X8R2A103M080AD CGA3E2X8R1H103M080AD ±10% CGA4F2X8R2A103K085AD 2012 0.85±0.15 ±20% CGA4F2X8R2A103M085AD ±10% CGA2B3X8R1E153K050BD 1005 0.50±0.10 ±20% CGA2B3X8R1E153M050BD ±10% CGA3E2X8R2A153K080AD CGA3E2X8R1H153K080AD 15nF 1608 0.80±0.15 ±20% CGA3E2X8R2A153M080AD CGA3E2X8R1H153M080AD ±10% CGA4F2X8R2A153K085AD 2012 0.85±0.15 ±20% CGA4F2X8R2A153M085AD ±10% CGA2B3X8R1E223K050BD 1005 0.50±0.10 ±20% CGA2B3X8R1E223M050BD ±10% CGA3E3X8R2A223K080AD CGA3E2X8R1H223K080AD 22nF 1608 0.80±0.15 ±20% CGA3E3X8R2A223M080AD CGA3E2X8R1H223M080AD ±10% CGA4J2X8R2A223K125AD 2012 1.25±0.25 ±20% CGA4J2X8R2A223M125AD ±10% CGA2B1X8R1E333K050BD CGA2B3X8R1C333K050BD 1005 0.50±0.10 ±20% CGA2B1X8R1E333M050BD CGA2B3X8R1C333M050BD ±10% CGA3E3X8R2A333K080AD CGA3E2X8R1H333K080AD 1608 0.80±0.15 ±20% CGA3E3X8R2A333M080AD CGA3E2X8R1H333M080AD 33nF ±10% CGA4J3X8R2A333K125AD 2012 1.25±0.25 ±20% CGA4J3X8R2A333M125AD ±10% CGA5F2X8R2A333K085AD 3216 0.85±0.15 ±20% CGA5F2X8R2A333M085AD ±10% CGA2B1X8R1E473K050BD CGA2B3X8R1C473K050BD 1005 0.50±0.10 ±20% CGA2B1X8R1E473M050BD CGA2B3X8R1C473M050BD ±10% CGA3E2X8R1H473K080AD 1608 0.80±0.15 ±20% CGA3E2X8R1H473M080AD 47nF ±10% CGA4J3X8R2A473K125AD 2012 1.25±0.25 ±20% CGA4J3X8R2A473M125AD ±10% CGA5F2X8R2A473K085AD 3216 0.85±0.15 ±20% CGA5F2X8R2A473M085AD ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(15/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X8R (–55 to +150°C, ±15%) Thickness Capacitance Catalog number CapacitanceDimensions (mm) tolerance Rated voltage Edc: 100V Rated voltage Edc: 50V Rated voltage Edc: 25V Rated voltage Edc: 16V ±10% CGA3E3X8R1H683K080AD CGA3E2X8R1E683K080AD 1608 0.80±0.15 ±20% CGA3E3X8R1H683M080AD CGA3E2X8R1E683M080AD ±10% CGA4J3X8R2A683K125AD CGA4J2X8R1H683K125AD 68nF 2012 1.25±0.25 ±20% CGA4J3X8R2A683M125AD CGA4J2X8R1H683M125AD ±10% CGA5H2X8R2A683K115AD 3216 1.15±0.15 ±20% CGA5H2X8R2A683M115AD ±10% CGA3E3X8R1H104K080AD CGA3E2X8R1E104K080AD 1608 0.80±0.15 ±20% CGA3E3X8R1H104M080AD CGA3E2X8R1E104M080AD ±10% CGA4J2X8R1H104K125AD 100nF 2012 1.25±0.25 ±20% CGA4J2X8R1H104M125AD ±10% CGA5H2X8R2A104K115AD 3216 1.15±0.15 ±20% CGA5H2X8R2A104M115AD ±10% CGA3E3X8R1E154K080AD 1608 0.80±0.15 ±20% CGA3E3X8R1E154M080AD ±10% CGA4F2X8R1E154K085AD 0.85±0.15 ±20% CGA4F2X8R1E154M085AD 2012 ±10% CGA4J3X8R1H154K125AD 150nF 1.25±0.25 ±20% CGA4J3X8R1H154M125AD ±10% CGA5F2X8R1H154K085AD 0.85±0.15 ±20% CGA5F2X8R1H154M085AD 3216 ±10% CGA5L2X8R2A154K160AD 1.60+0.30,-0.10 ±20% CGA5L2X8R2A154M160AD ±10% CGA3E3X8R1E224K080AD 1608 0.80±0.15 ±20% CGA3E3X8R1E224M080AD ±10% CGA4J3X8R1H224K125AD CGA4J2X8R1E224K125AD 2012 1.25±0.25 ±20% CGA4J3X8R1H224M125AD CGA4J2X8R1E224M125AD 220nF ±10% CGA5H2X8R1H224K115AD 1.15±0.15 ±20% CGA5H2X8R1H224M115AD 3216 ±10% CGA5L3X8R2A224K160AD 1.60+0.30,-0.10 ±20% CGA5L3X8R2A224M160AD ±10% CGA3E1X8R1E334K080AD CGA3E3X8R1C334K080AD 1608 0.80±0.15 ±20% CGA3E1X8R1E334M080AD CGA3E3X8R1C334M080AD ±10% CGA4J2X8R1E334K125AD 2012 1.25±0.25 ±20% CGA4J2X8R1E334M125AD 330nF ±10% CGA5F2X8R1E334K085AD 0.85±0.15 ±20% CGA5F2X8R1E334M085AD 3216 ±10% CGA5L3X8R2A334K160AD CGA5L2X8R1H334K160AD 1.60+0.30,-0.10 ±20% CGA5L3X8R2A334M160AD CGA5L2X8R1H334M160AD ±10% CGA3E3X8R1C474K080AD 1608 0.80±0.15 ±20% CGA3E3X8R1C474M080AD ±10% CGA4J3X8R1E474K125AD 2012 1.25±0.25 ±20% CGA4J3X8R1E474M125AD ±10% CGA5F2X8R1E474K085AD 470nF 0.85±0.15 ±20% CGA5F2X8R1E474M085AD 3216 ±10% CGA5L2X8R1H474K160AD 1.60+0.30,-0.10 ±20% CGA5L2X8R1H474M160AD ±10% CGA6M3X8R2A474K200AD 3225 2.00±0.20 ±20% CGA6M3X8R2A474M200AD ±10% CGA4J1X8R1E684K125AD CGA4J3X8R1C684K125AD 2012 1.25±0.25 ±20% CGA4J1X8R1E684M125AD CGA4J3X8R1C684M125AD ±10% CGA5H2X8R1E684K115AD 1.15±0.15 ±20% CGA5H2X8R1E684M115AD 680nF 3216 ±10% CGA5L3X8R1H684K160AD 1.60+0.30,-0.10 ±20% CGA5L3X8R1H684M160AD ±10% CGA6P3X8R2A684K250AD 3225 2.50±0.30 ±20% CGA6P3X8R2A684M250AD ±10% CGA4J1X8R1E105K125AD CGA4J3X8R1C105K125AD 2012 1.25±0.25 ±20% CGA4J1X8R1E105M125AD CGA4J3X8R1C105M125AD 1µF ±10% CGA5L3X8R1H105K160AD CGA5L2X8R1E105K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L3X8R1H105M160AD CGA5L2X8R1E105M160AD ±10% CGA5L3X8R1E155K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L3X8R1E155M160AD 1.5µF ±10% CGA6L2X8R1E155K160AD 3225 1.60±0.20 ±20% CGA6L2X8R1E155M160AD ±10% CGA5L3X8R1E225K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L3X8R1E225M160AD 2.2µF ±10% CGA6M2X8R1E225K200AD 3225 2.00±0.20 ±20% CGA6M2X8R1E225M200AD ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm

(16/16) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X8R (–55 to +150°C, ±15%) Thickness Capacitance Catalog number CapacitanceDimensions (mm) tolerance Rated voltage Edc: 25V Rated voltage Edc: 16V ±10% CGA5L1X8R1E335K160AD CGA5L3X8R1C335K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L1X8R1E335M160AD CGA5L3X8R1C335M160AD 3.3µF ±10% CGA6P2X8R1E335K250AD 3225 2.50±0.30 ±20% CGA6P2X8R1E335M250AD ±10% CGA5L1X8R1E475K160AD CGA5L3X8R1C475K160AD 3216 1.60+0.30,-0.10 ±20% CGA5L1X8R1E475M160AD CGA5L3X8R1C475M160AD 4.7µF ±10% CGA6P3X8R1E475K250AD 3225 2.50±0.30 ±20% CGA6P3X8R1E475M250AD ±10% CGA6M1X8R1E685K200AD CGA6M3X8R1C685K200AD 6.8µF 3225 2.00±0.20 ±20% CGA6M1X8R1E685M200AD CGA6M3X8R1C685M200AD ±10% CGA6P1X8R1E106K250AD CGA6P3X8R1C106K250AD 10µF 3225 2.50±0.30 ±20% CGA6P1X8R1E106M250AD CGA6P3X8R1C106M250AD Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190508 / mlcc_automotive_epoxy_en.fm