MULTILAYER CERAMIC CHIP CAPACITORS April 2019 MULTILAYER CERAMIC CHIP CAPACITORS Automotive grade, serial design 　 CEU series CEU3 1608 [0603 inch] CEU4 2012 [0805 inch] * Dimensions code: JIS[EIA]

(2/6) MULTILAYER CERAMIC CHIP CAPACITORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS 1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (excepting Pharmaceutical Affairs Law clas- (10) Electric heating apparatus, burning equipment sification Class1,2) (11) Disaster prevention/crime prevention equipment (4) Power-generation control equipment (12) Safety equipment (5) Atomic energy-related equipment　　 (13) Other applications that are not considered general-purpose (6) Seabed equipment applications (7) Transportation control equipment When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability, or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions. 2. We may modify products or discontinue production of a product listed in this catalog without prior notification. 3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly recommend that you exchange these delivery specifications with customers that use one of these products. 4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and For- eign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law. 5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. 6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. We do not grant license of these rights. 7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to products that are purchased through other third parties. Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail. This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number orders. Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the product label. Contact your local TDK Sales representative for more information. (Example) Catalog issued date Catalog number Item description (on delivery label) Prior to January 2013 C1608C0G1E103J(080AA) C1608C0G1E103JT000N January 2013 and later C1608C0G1E103J080AA C1608C0G1E103JT000N 20190402 / mlcc_automotive_serial_en.fm

(3/6) MULTILAYER CERAMIC CHIP CAPACITORS CEU series Cl Pb Br Serial design RoHS REACH Halogen Lead SVHC-Free Free Free Type: CEU3/1608 [0603 inch], CEU4/2012 [0805 inch] ■SERIES OVERVIEW Serial design CEU series, automotive grade of TDK's multilayer ceramic chip capacitor, is a product which has two capacitors in series in single body construction. The structure decreases risk of short circuit failures due to mechanical flex cracks. Additionally, CEU series has higher mechani- cal endurance by flexible resin layers which absorbs thermal and mechanical stress. The capacitance range is up to 100nF. ■FEATURES ■APPLICATIONS • Serial structure decreases risk of short circuit failures due to mechani- (cid:129) Fail-safe design in battery line. cal flex cracks. (cid:129) For circuits requiring safer design (cid:129) Higher mechanical endurance is realized by flexible resin layers. (cid:129) AEC-Q200 compliant. ■SHAPE & DIMENSIONS ■PRODUCT STRUCTURE General Serial design L W T G Sn Ni B Conductive resin layer Cu L Body length W Body width A general structure which A product which has two capacitors in series opposite inner electrodes are in single body construction and flexible resin T Body height alternately stacked. layer. B Terminal width G Terminal spacing Dimensions in mm Type L W T B G CEU3 1.60+0.20,–0.10 0.80+0.15,–0.10 0.80+0.15,–0.10 0.20min. 0.30min. CEU4 2.00+0.30,–0.20 1.25+0.25,–0.20 1.25+0.25,–0.20 0.20min. 0.50min. Dimensional tolerances are typical values. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190402 / mlcc_automotive_serial_en.fm

(4/6) MULTILAYER CERAMIC CHIP CAPACITORS ■CATALOG NUMBER CONSTRUCTION CEU 4 J 2 X7R 1H 104 K 125 A E (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (1) Series (7) Nominal capacitance (pF) The capacitance is expressed in three digit codes and in units of (2) Dimensions L x W (mm) pico Farads (pF). The first and second digits identify the first and Code EIA Length Width Terminal width second significant figures of the capacitance. The third digit identi- 3 CC0603 1.60 0.80 0.20 fies the multiplier. R designates a decimal point. 4 CC0805 2.00 1.25 0.20 (Example)0R5 = 0.5pF (3) Thickness code 101 = 100pF Code Thickness 225 = 2,200,000pF = 2.2µF E 0.80 mm (8) Capacitance tolerance J 1.25 mm Code Tolerance (4) Voltage condition for life test K ±10% M ±20% Symbol Condition 2 2 × R.V. (9) Thickness Code Thickness (5) Temperature characteristics 080 0.80 mm Temperature Capacitance change Temperature range 125 1.25 mm characteristics X7R ±15% –55 to +125°C (10) Packaging style Code Style (6) Rated voltage (DC) A 178mm reel, 4mm pitch Code Voltage (DC) 1H 50V (11) Special reserved code 2A 100V Code Description E Soft termination Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190402 / mlcc_automotive_serial_en.fm

(5/6) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range chart CEU3/1608 [0603 inch] Capacitance X7R 2A 1H (pF) Code (100V) (50V) 1,000 102 1,500 152 2,200 222 3,300 332 4,700 472 6,800 682 10,000 103 15,000 153 22,000 223 33,000 333 47,000 473 Standard thickness　 0.80mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-6 for the details such as product thickness and capacitance tolerance. Capacitance range chart CEU4/2012 [0805 inch] Capacitance X7R 2A 1H (pF) Code (100V) (50V) 1,000 102 1,500 152 2,200 222 3,300 332 4,700 472 6,800 682 10,000 103 15,000 153 22,000 223 33,000 333 47,000 473 68,000 683 100,000 104 Standard thickness　 1.25 mm Background gray: The product which is not recommended to a new design. ■ Please refer to the capacitance range table at P-6 for the details such as product thickness and capacitance tolerance. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190402 / mlcc_automotive_serial_en.fm

(6/6) MULTILAYER CERAMIC CHIP CAPACITORS Capacitance range table Temperature characteristics: X7R (–55 to +125°C, ±15%) Thickness Capacitance Catalog number Capacitance Dimensions （mm） tolerance Rated voltage Edc: 100V Rated voltage Edc: 50V ±10% CEU3E2X7R2A102K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R2A102M080AE 1nF ±10% CEU4J2X7R2A102K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A102M125AE ±10% CEU3E2X7R2A152K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R2A152M080AE 1.5nF ±10% CEU4J2X7R2A152K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A152M125AE ±10% CEU3E2X7R2A222K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R2A222M080AE 2.2nF ±10% CEU4J2X7R2A222K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A222M125AE ±10% CEU3E2X7R2A332K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R2A332M080AE 3.3nF ±10% CEU4J2X7R2A332K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A332M125AE ±10% CEU3E2X7R1H472K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H472M080AE 4.7nF ±10% CEU4J2X7R2A472K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A472M125AE ±10% CEU3E2X7R1H682K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H682M080AE 6.8nF ±10% CEU4J2X7R2A682K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A682M125AE ±10% CEU3E2X7R1H103K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H103M080AE 10nF ±10% CEU4J2X7R2A103K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A103M125AE ±10% CEU3E2X7R1H153K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H153M080AE 15nF ±10% CEU4J2X7R2A153K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R2A153M125AE ±10% CEU3E2X7R1H223K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H223M080AE 22nF ±10% CEU4J2X7R1H223K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R1H223M125AE ±10% CEU3E2X7R1H333K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H333M080AE 33nF ±10% CEU4J2X7R1H333K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R1H333M125AE ±10% CEU3E2X7R1H473K080AE 1608 0.80+0.15,-0.10 ±20% CEU3E2X7R1H473M080AE 47nF ±10% CEU4J2X7R1H473K125AE 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R1H473M125AE ±10% CEU4J2X7R1H683K125AE 68nF 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R1H683M125AE ±10% CEU4J2X7R1H104K125AE 100nF 2012 1.25+0.25,-0.20 ±20% CEU4J2X7R1H104M125AE ■Gray item: The product which is not recommended to a new design. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190402 / mlcc_automotive_serial_en.fm